xref: /freebsd/sys/contrib/device-tree/src/powerpc/fsl/t1023si-post.dtsi (revision 8ddb146abcdf061be9f2c0db7e391697dafad85c)
1/*
2 * T1023 Silicon/SoC Device Tree Source (post include)
3 *
4 * Copyright 2014 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *	 notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *	 notice, this list of conditions and the following disclaimer in the
12 *	 documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *	 names of its contributors may be used to endorse or promote products
15 *	 derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35#include <dt-bindings/thermal/thermal.h>
36
37&bman_fbpr {
38	compatible = "fsl,bman-fbpr";
39	alloc-ranges = <0 0 0x10000 0>;
40};
41
42&qman_fqd {
43	compatible = "fsl,qman-fqd";
44	alloc-ranges = <0 0 0x10000 0>;
45};
46
47&qman_pfdr {
48	compatible = "fsl,qman-pfdr";
49	alloc-ranges = <0 0 0x10000 0>;
50};
51
52&ifc {
53	#address-cells = <2>;
54	#size-cells = <1>;
55	compatible = "fsl,ifc", "simple-bus";
56	interrupts = <25 2 0 0>;
57};
58
59&pci0 {
60	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
61	device_type = "pci";
62	#size-cells = <2>;
63	#address-cells = <3>;
64	bus-range = <0x0 0xff>;
65	interrupts = <20 2 0 0>;
66	fsl,iommu-parent = <&pamu0>;
67	pcie@0 {
68		reg = <0 0 0 0 0>;
69		#interrupt-cells = <1>;
70		#size-cells = <2>;
71		#address-cells = <3>;
72		device_type = "pci";
73		interrupts = <20 2 0 0>;
74		interrupt-map-mask = <0xf800 0 0 7>;
75		interrupt-map = <
76			/* IDSEL 0x0 */
77			0000 0 0 1 &mpic 40 1 0 0
78			0000 0 0 2 &mpic 1 1 0 0
79			0000 0 0 3 &mpic 2 1 0 0
80			0000 0 0 4 &mpic 3 1 0 0
81			>;
82	};
83};
84
85&pci1 {
86	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
87	device_type = "pci";
88	#size-cells = <2>;
89	#address-cells = <3>;
90	bus-range = <0 0xff>;
91	interrupts = <21 2 0 0>;
92	fsl,iommu-parent = <&pamu0>;
93	pcie@0 {
94		reg = <0 0 0 0 0>;
95		#interrupt-cells = <1>;
96		#size-cells = <2>;
97		#address-cells = <3>;
98		device_type = "pci";
99		interrupts = <21 2 0 0>;
100		interrupt-map-mask = <0xf800 0 0 7>;
101		interrupt-map = <
102			/* IDSEL 0x0 */
103			0000 0 0 1 &mpic 41 1 0 0
104			0000 0 0 2 &mpic 5 1 0 0
105			0000 0 0 3 &mpic 6 1 0 0
106			0000 0 0 4 &mpic 7 1 0 0
107			>;
108	};
109};
110
111&pci2 {
112	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
113	device_type = "pci";
114	#size-cells = <2>;
115	#address-cells = <3>;
116	bus-range = <0x0 0xff>;
117	interrupts = <22 2 0 0>;
118	fsl,iommu-parent = <&pamu0>;
119	pcie@0 {
120		reg = <0 0 0 0 0>;
121		#interrupt-cells = <1>;
122		#size-cells = <2>;
123		#address-cells = <3>;
124		device_type = "pci";
125		interrupts = <22 2 0 0>;
126		interrupt-map-mask = <0xf800 0 0 7>;
127		interrupt-map = <
128			/* IDSEL 0x0 */
129			0000 0 0 1 &mpic 42 1 0 0
130			0000 0 0 2 &mpic 9 1 0 0
131			0000 0 0 3 &mpic 10 1 0 0
132			0000 0 0 4 &mpic 11 1 0 0
133			>;
134	};
135};
136
137&dcsr {
138	#address-cells = <1>;
139	#size-cells = <1>;
140	compatible = "fsl,dcsr", "simple-bus";
141
142	dcsr-epu@0 {
143		compatible = "fsl,t1023-dcsr-epu", "fsl,dcsr-epu";
144		interrupts = <52 2 0 0
145			      84 2 0 0
146			      85 2 0 0>;
147		reg = <0x0 0x1000>;
148	};
149	dcsr-npc {
150		compatible = "fsl,t1023-dcsr-cnpc", "fsl,dcsr-cnpc";
151		reg = <0x1000 0x1000 0x1002000 0x10000>;
152	};
153	dcsr-nxc@2000 {
154		compatible = "fsl,dcsr-nxc";
155		reg = <0x2000 0x1000>;
156	};
157	dcsr-corenet {
158		compatible = "fsl,dcsr-corenet";
159		reg = <0x8000 0x1000 0x1A000 0x1000>;
160	};
161	dcsr-ocn@11000 {
162		compatible = "fsl,t1023-dcsr-ocn", "fsl,dcsr-ocn";
163		reg = <0x11000 0x1000>;
164	};
165	dcsr-ddr@12000 {
166		compatible = "fsl,dcsr-ddr";
167		dev-handle = <&ddr1>;
168		reg = <0x12000 0x1000>;
169	};
170	dcsr-nal@18000 {
171		compatible = "fsl,t1023-dcsr-nal", "fsl,dcsr-nal";
172		reg = <0x18000 0x1000>;
173	};
174	dcsr-rcpm@22000 {
175		compatible = "fsl,t1023-dcsr-rcpm", "fsl,dcsr-rcpm";
176		reg = <0x22000 0x1000>;
177	};
178	dcsr-snpc@30000 {
179		compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
180		reg = <0x30000 0x1000 0x1022000 0x10000>;
181	};
182	dcsr-snpc@31000 {
183		compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
184		reg = <0x31000 0x1000 0x1042000 0x10000>;
185	};
186	dcsr-cpu-sb-proxy@100000 {
187		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
188		cpu-handle = <&cpu0>;
189		reg = <0x100000 0x1000 0x101000 0x1000>;
190	};
191	dcsr-cpu-sb-proxy@108000 {
192		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
193		cpu-handle = <&cpu1>;
194		reg = <0x108000 0x1000 0x109000 0x1000>;
195	};
196};
197
198&bportals {
199	#address-cells = <0x1>;
200	#size-cells = <0x1>;
201	compatible = "simple-bus";
202
203	bman-portal@0 {
204		cell-index = <0x0>;
205		compatible = "fsl,bman-portal";
206		reg = <0x0 0x4000>, <0x1000000 0x1000>;
207		interrupts = <105 2 0 0>;
208	};
209	bman-portal@4000 {
210		cell-index = <0x1>;
211		compatible = "fsl,bman-portal";
212		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
213		interrupts = <107 2 0 0>;
214	};
215	bman-portal@8000 {
216		cell-index = <2>;
217		compatible = "fsl,bman-portal";
218		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
219		interrupts = <109 2 0 0>;
220	};
221	bman-portal@c000 {
222		cell-index = <0x3>;
223		compatible = "fsl,bman-portal";
224		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
225		interrupts = <111 2 0 0>;
226	};
227	bman-portal@10000 {
228		cell-index = <0x4>;
229		compatible = "fsl,bman-portal";
230		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
231		interrupts = <113 2 0 0>;
232	};
233	bman-portal@14000 {
234		cell-index = <0x5>;
235		compatible = "fsl,bman-portal";
236		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
237		interrupts = <115 2 0 0>;
238	};
239};
240
241&qportals {
242	#address-cells = <0x1>;
243	#size-cells = <0x1>;
244	compatible = "simple-bus";
245
246	qportal0: qman-portal@0 {
247		compatible = "fsl,qman-portal";
248		reg = <0x0 0x4000>, <0x1000000 0x1000>;
249		interrupts = <104 0x2 0 0>;
250		cell-index = <0x0>;
251	};
252	qportal1: qman-portal@4000 {
253		compatible = "fsl,qman-portal";
254		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
255		interrupts = <106 0x2 0 0>;
256		cell-index = <0x1>;
257	};
258	qportal2: qman-portal@8000 {
259		compatible = "fsl,qman-portal";
260		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
261		interrupts = <108 0x2 0 0>;
262		cell-index = <0x2>;
263	};
264	qportal3: qman-portal@c000 {
265		compatible = "fsl,qman-portal";
266		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
267		interrupts = <110 0x2 0 0>;
268		cell-index = <0x3>;
269	};
270	qportal4: qman-portal@10000 {
271		compatible = "fsl,qman-portal";
272		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
273		interrupts = <112 0x2 0 0>;
274		cell-index = <0x4>;
275	};
276	qportal5: qman-portal@14000 {
277		compatible = "fsl,qman-portal";
278		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
279		interrupts = <114 0x2 0 0>;
280		cell-index = <0x5>;
281	};
282};
283
284&soc {
285	#address-cells = <1>;
286	#size-cells = <1>;
287	device_type = "soc";
288	compatible = "simple-bus";
289
290	soc-sram-error {
291		compatible = "fsl,soc-sram-error";
292		interrupts = <16 2 1 29>;
293	};
294
295	corenet-law@0 {
296		compatible = "fsl,corenet-law";
297		reg = <0x0 0x1000>;
298		fsl,num-laws = <16>;
299	};
300
301	ddr1: memory-controller@8000 {
302		compatible = "fsl,qoriq-memory-controller-v5.0",
303				"fsl,qoriq-memory-controller";
304		reg = <0x8000 0x1000>;
305		interrupts = <16 2 1 23>;
306	};
307
308	cpc: l3-cache-controller@10000 {
309		compatible = "fsl,t1023-l3-cache-controller", "cache";
310		reg = <0x10000 0x1000>;
311		interrupts = <16 2 1 27>;
312	};
313
314	corenet-cf@18000 {
315		compatible = "fsl,corenet2-cf";
316		reg = <0x18000 0x1000>;
317		interrupts = <16 2 1 31>;
318	};
319
320	iommu@20000 {
321		compatible = "fsl,pamu-v1.0", "fsl,pamu";
322		reg = <0x20000 0x1000>;
323		ranges = <0 0x20000 0x1000>;
324		#address-cells = <1>;
325		#size-cells = <1>;
326		interrupts = <
327			24 2 0 0
328			16 2 1 30>;
329		pamu0: pamu@0 {
330			reg = <0 0x1000>;
331			fsl,primary-cache-geometry = <128 1>;
332			fsl,secondary-cache-geometry = <32 2>;
333		};
334	};
335
336/include/ "qoriq-mpic.dtsi"
337
338	guts: global-utilities@e0000 {
339		compatible = "fsl,t1023-device-config", "fsl,qoriq-device-config-2.0";
340		reg = <0xe0000 0xe00>;
341		fsl,has-rstcr;
342		fsl,liodn-bits = <12>;
343	};
344
345/include/ "qoriq-clockgen2.dtsi"
346	global-utilities@e1000 {
347		compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0";
348	};
349
350	rcpm: global-utilities@e2000 {
351		compatible = "fsl,t1023-rcpm", "fsl,qoriq-rcpm-2.1";
352		reg = <0xe2000 0x1000>;
353	};
354
355	sfp: sfp@e8000 {
356		compatible = "fsl,t1023-sfp";
357		reg = <0xe8000 0x1000>;
358	};
359
360	serdes: serdes@ea000 {
361		compatible = "fsl,t1023-serdes";
362		reg = <0xea000 0x4000>;
363	};
364
365	tmu: tmu@f0000 {
366		compatible = "fsl,qoriq-tmu";
367		reg = <0xf0000 0x1000>;
368		interrupts = <18 2 0 0>;
369		fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
370		fsl,tmu-calibration = <0x00000000 0x0000000f
371				       0x00000001 0x00000017
372				       0x00000002 0x0000001e
373				       0x00000003 0x00000026
374				       0x00000004 0x0000002e
375				       0x00000005 0x00000035
376				       0x00000006 0x0000003d
377				       0x00000007 0x00000044
378				       0x00000008 0x0000004c
379				       0x00000009 0x00000053
380				       0x0000000a 0x0000005b
381				       0x0000000b 0x00000064
382
383				       0x00010000 0x00000011
384				       0x00010001 0x0000001c
385				       0x00010002 0x00000024
386				       0x00010003 0x0000002b
387				       0x00010004 0x00000034
388				       0x00010005 0x00000039
389				       0x00010006 0x00000042
390				       0x00010007 0x0000004c
391				       0x00010008 0x00000051
392				       0x00010009 0x0000005a
393				       0x0001000a 0x00000063
394
395				       0x00020000 0x00000013
396				       0x00020001 0x00000019
397				       0x00020002 0x00000024
398				       0x00020003 0x0000002c
399				       0x00020004 0x00000035
400				       0x00020005 0x0000003d
401				       0x00020006 0x00000046
402				       0x00020007 0x00000050
403				       0x00020008 0x00000059
404
405				       0x00030000 0x00000002
406				       0x00030001 0x0000000d
407				       0x00030002 0x00000019
408				       0x00030003 0x00000024>;
409		#thermal-sensor-cells = <1>;
410	};
411
412	thermal-zones {
413		cpu_thermal: cpu-thermal {
414			polling-delay-passive = <1000>;
415			polling-delay = <5000>;
416
417			thermal-sensors = <&tmu 0>;
418
419			trips {
420				cpu_alert: cpu-alert {
421					temperature = <85000>;
422					hysteresis = <2000>;
423					type = "passive";
424				};
425				cpu_crit: cpu-crit {
426					temperature = <95000>;
427					hysteresis = <2000>;
428					type = "critical";
429				};
430			};
431
432			cooling-maps {
433				map0 {
434					trip = <&cpu_alert>;
435					cooling-device =
436						<&cpu0 THERMAL_NO_LIMIT
437							THERMAL_NO_LIMIT>;
438				};
439				map1 {
440					trip = <&cpu_alert>;
441					cooling-device =
442						<&cpu1 THERMAL_NO_LIMIT
443							THERMAL_NO_LIMIT>;
444				};
445			};
446		};
447	};
448
449	scfg: global-utilities@fc000 {
450		compatible = "fsl,t1023-scfg";
451		reg = <0xfc000 0x1000>;
452	};
453
454/include/ "elo3-dma-0.dtsi"
455/include/ "elo3-dma-1.dtsi"
456
457/include/ "qoriq-espi-0.dtsi"
458	spi@110000 {
459		fsl,espi-num-chipselects = <4>;
460	};
461
462/include/ "qoriq-esdhc-0.dtsi"
463	sdhc@114000 {
464		compatible = "fsl,t1023-esdhc", "fsl,esdhc";
465		fsl,iommu-parent = <&pamu0>;
466		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
467		sdhci,auto-cmd12;
468		no-1-8-v;
469	};
470/include/ "qoriq-i2c-0.dtsi"
471/include/ "qoriq-i2c-1.dtsi"
472/include/ "qoriq-duart-0.dtsi"
473/include/ "qoriq-duart-1.dtsi"
474/include/ "qoriq-gpio-0.dtsi"
475/include/ "qoriq-gpio-1.dtsi"
476/include/ "qoriq-gpio-2.dtsi"
477/include/ "qoriq-gpio-3.dtsi"
478/include/ "qoriq-usb2-mph-0.dtsi"
479	usb0: usb@210000 {
480		compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
481		fsl,iommu-parent = <&pamu0>;
482		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
483		phy_type = "utmi";
484		port0;
485	};
486/include/ "qoriq-usb2-dr-0.dtsi"
487	usb1: usb@211000 {
488		compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
489		fsl,iommu-parent = <&pamu0>;
490		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
491		dr_mode = "host";
492		phy_type = "utmi";
493	};
494/include/ "qoriq-sata2-0.dtsi"
495	sata@220000 {
496		fsl,iommu-parent = <&pamu0>;
497		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
498	};
499
500/include/ "qoriq-sec5.0-0.dtsi"
501/include/ "qoriq-qman3.dtsi"
502/include/ "qoriq-bman1.dtsi"
503
504/include/ "qoriq-fman3l-0.dtsi"
505/include/ "qoriq-fman3-0-10g-0-best-effort.dtsi"
506/include/ "qoriq-fman3-0-1g-1.dtsi"
507/include/ "qoriq-fman3-0-1g-2.dtsi"
508/include/ "qoriq-fman3-0-1g-3.dtsi"
509	fman@400000 {
510		enet0: ethernet@e0000 {
511		};
512
513		enet1: ethernet@e2000 {
514		};
515
516		enet2: ethernet@e4000 {
517		};
518
519		enet3: ethernet@e6000 {
520		};
521	};
522};
523