1// SPDX-License-Identifier: GPL-2.0-only 2 3#include "msm8916-pm8916.dtsi" 4#include <dt-bindings/gpio/gpio.h> 5#include <dt-bindings/input/input.h> 6#include <dt-bindings/interrupt-controller/irq.h> 7 8/ { 9 aliases { 10 serial0 = &blsp1_uart2; 11 }; 12 13 chosen { 14 stdout-path = "serial0"; 15 }; 16 17 reserved-memory { 18 /* Additional memory used by Samsung firmware modifications */ 19 tz-apps@85500000 { 20 reg = <0x0 0x85500000 0x0 0xb00000>; 21 no-map; 22 }; 23 }; 24 25 gpio_hall_sensor: gpio-hall-sensor { 26 compatible = "gpio-keys"; 27 28 pinctrl-names = "default"; 29 pinctrl-0 = <&gpio_hall_sensor_default>; 30 31 label = "GPIO Hall Effect Sensor"; 32 33 event-hall-sensor { 34 label = "Hall Effect Sensor"; 35 gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; 36 linux,input-type = <EV_SW>; 37 linux,code = <SW_LID>; 38 linux,can-disable; 39 }; 40 }; 41 42 gpio-keys { 43 compatible = "gpio-keys"; 44 45 pinctrl-names = "default"; 46 pinctrl-0 = <&gpio_keys_default>; 47 48 label = "GPIO Buttons"; 49 50 button-volume-up { 51 label = "Volume Up"; 52 gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; 53 linux,code = <KEY_VOLUMEUP>; 54 }; 55 56 button-home { 57 label = "Home Key"; 58 gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; 59 linux,code = <KEY_HOMEPAGE>; 60 }; 61 }; 62 63 i2c_muic: i2c-muic { 64 compatible = "i2c-gpio"; 65 sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; 66 scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; 67 68 pinctrl-names = "default"; 69 pinctrl-0 = <&muic_i2c_default>; 70 71 #address-cells = <1>; 72 #size-cells = <0>; 73 74 muic: extcon@25 { 75 compatible = "siliconmitus,sm5703-muic"; 76 reg = <0x25>; 77 78 interrupt-parent = <&msmgpio>; 79 interrupts = <12 IRQ_TYPE_EDGE_FALLING>; 80 81 pinctrl-names = "default"; 82 pinctrl-0 = <&muic_int_default>; 83 }; 84 }; 85}; 86 87&blsp1_uart2 { 88 status = "okay"; 89}; 90 91&pm8916_resin { 92 status = "okay"; 93 linux,code = <KEY_VOLUMEDOWN>; 94}; 95 96&sdhc_1 { 97 status = "okay"; 98 99 pinctrl-names = "default", "sleep"; 100 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; 101 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; 102}; 103 104&sdhc_2 { 105 status = "okay"; 106 107 pinctrl-names = "default", "sleep"; 108 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; 109 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; 110 111 cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; 112}; 113 114&usb { 115 extcon = <&muic>, <&muic>; 116 status = "okay"; 117}; 118 119&usb_hs_phy { 120 extcon = <&muic>; 121}; 122 123&wcnss { 124 status = "okay"; 125}; 126 127&wcnss_iris { 128 compatible = "qcom,wcn3620"; 129}; 130 131&smd_rpm_regulators { 132 vdd_l1_l2_l3-supply = <&pm8916_s3>; 133 vdd_l4_l5_l6-supply = <&pm8916_s4>; 134 vdd_l7-supply = <&pm8916_s4>; 135 136 s3 { 137 regulator-min-microvolt = <1200000>; 138 regulator-max-microvolt = <1300000>; 139 }; 140 141 s4 { 142 regulator-min-microvolt = <1800000>; 143 regulator-max-microvolt = <2100000>; 144 }; 145 146 l1 { 147 regulator-min-microvolt = <1225000>; 148 regulator-max-microvolt = <1225000>; 149 }; 150 151 l2 { 152 regulator-min-microvolt = <1200000>; 153 regulator-max-microvolt = <1200000>; 154 }; 155 156 l4 { 157 regulator-min-microvolt = <2050000>; 158 regulator-max-microvolt = <2050000>; 159 }; 160 161 l5 { 162 regulator-min-microvolt = <1800000>; 163 regulator-max-microvolt = <1800000>; 164 }; 165 166 l6 { 167 regulator-min-microvolt = <1800000>; 168 regulator-max-microvolt = <1800000>; 169 }; 170 171 l7 { 172 regulator-min-microvolt = <1800000>; 173 regulator-max-microvolt = <1800000>; 174 }; 175 176 l8 { 177 regulator-min-microvolt = <2850000>; 178 regulator-max-microvolt = <2900000>; 179 }; 180 181 l9 { 182 regulator-min-microvolt = <3300000>; 183 regulator-max-microvolt = <3300000>; 184 }; 185 186 l10 { 187 regulator-min-microvolt = <2700000>; 188 regulator-max-microvolt = <2800000>; 189 }; 190 191 l11 { 192 regulator-min-microvolt = <1800000>; 193 regulator-max-microvolt = <2950000>; 194 regulator-allow-set-load; 195 regulator-system-load = <200000>; 196 }; 197 198 l12 { 199 regulator-min-microvolt = <1800000>; 200 regulator-max-microvolt = <2950000>; 201 }; 202 203 l13 { 204 regulator-min-microvolt = <3075000>; 205 regulator-max-microvolt = <3075000>; 206 }; 207 208 l14 { 209 regulator-min-microvolt = <1800000>; 210 regulator-max-microvolt = <3300000>; 211 }; 212 213 l15 { 214 regulator-min-microvolt = <1800000>; 215 regulator-max-microvolt = <3300000>; 216 }; 217 218 l16 { 219 regulator-min-microvolt = <1800000>; 220 regulator-max-microvolt = <3300000>; 221 }; 222 223 l17 { 224 regulator-min-microvolt = <3000000>; 225 regulator-max-microvolt = <3000000>; 226 }; 227 228 l18 { 229 regulator-min-microvolt = <2700000>; 230 regulator-max-microvolt = <2700000>; 231 }; 232}; 233 234&msmgpio { 235 gpio_hall_sensor_default: gpio-hall-sensor-default-state { 236 pins = "gpio52"; 237 function = "gpio"; 238 239 drive-strength = <2>; 240 bias-disable; 241 }; 242 243 gpio_keys_default: gpio-keys-default-state { 244 pins = "gpio107", "gpio109"; 245 function = "gpio"; 246 247 drive-strength = <2>; 248 bias-pull-up; 249 }; 250 251 muic_i2c_default: muic-i2c-default-state { 252 pins = "gpio105", "gpio106"; 253 function = "gpio"; 254 255 drive-strength = <2>; 256 bias-disable; 257 }; 258 259 muic_int_default: muic-int-default-state { 260 pins = "gpio12"; 261 function = "gpio"; 262 263 drive-strength = <2>; 264 bias-disable; 265 }; 266}; 267