1/* 2 * Copyright (c) 2017 MediaTek Inc. 3 * Author: YT Shen <yt.shen@mediatek.com> 4 * 5 * SPDX-License-Identifier: (GPL-2.0 OR MIT) 6 */ 7 8/dts-v1/; 9#include <dt-bindings/gpio/gpio.h> 10#include "mt2712e.dtsi" 11 12/ { 13 model = "MediaTek MT2712 evaluation board"; 14 compatible = "mediatek,mt2712-evb", "mediatek,mt2712"; 15 16 aliases { 17 serial0 = &uart0; 18 }; 19 20 memory@40000000 { 21 device_type = "memory"; 22 reg = <0 0x40000000 0 0x80000000>; 23 }; 24 25 chosen { 26 stdout-path = "serial0:921600n8"; 27 }; 28 29 cpus_fixed_vproc0: regulator-vproc-buck0 { 30 compatible = "regulator-fixed"; 31 regulator-name = "vproc_buck0"; 32 regulator-min-microvolt = <1000000>; 33 regulator-max-microvolt = <1000000>; 34 }; 35 36 cpus_fixed_vproc1: regulator-vproc-buck1 { 37 compatible = "regulator-fixed"; 38 regulator-name = "vproc_buck1"; 39 regulator-min-microvolt = <1000000>; 40 regulator-max-microvolt = <1000000>; 41 }; 42 43 extcon_usb: extcon_iddig { 44 compatible = "linux,extcon-usb-gpio"; 45 id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>; 46 }; 47 48 extcon_usb1: extcon_iddig1 { 49 compatible = "linux,extcon-usb-gpio"; 50 id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>; 51 }; 52 53 usb_p0_vbus: regulator-usb-p0-vbus { 54 compatible = "regulator-fixed"; 55 regulator-name = "p0_vbus"; 56 regulator-min-microvolt = <5000000>; 57 regulator-max-microvolt = <5000000>; 58 gpio = <&pio 13 GPIO_ACTIVE_HIGH>; 59 enable-active-high; 60 }; 61 62 usb_p1_vbus: regulator-usb-p1-vbus { 63 compatible = "regulator-fixed"; 64 regulator-name = "p1_vbus"; 65 regulator-min-microvolt = <5000000>; 66 regulator-max-microvolt = <5000000>; 67 gpio = <&pio 15 GPIO_ACTIVE_HIGH>; 68 enable-active-high; 69 }; 70 71 usb_p2_vbus: regulator-usb-p2-vbus { 72 compatible = "regulator-fixed"; 73 regulator-name = "p2_vbus"; 74 regulator-min-microvolt = <5000000>; 75 regulator-max-microvolt = <5000000>; 76 gpio = <&pio 16 GPIO_ACTIVE_HIGH>; 77 enable-active-high; 78 }; 79 80 usb_p3_vbus: regulator-usb-p3-vbus { 81 compatible = "regulator-fixed"; 82 regulator-name = "p3_vbus"; 83 regulator-min-microvolt = <5000000>; 84 regulator-max-microvolt = <5000000>; 85 gpio = <&pio 17 GPIO_ACTIVE_HIGH>; 86 enable-active-high; 87 regulator-always-on; 88 }; 89 90}; 91 92&auxadc { 93 status = "okay"; 94}; 95 96&cpu0 { 97 proc-supply = <&cpus_fixed_vproc0>; 98}; 99 100&cpu1 { 101 proc-supply = <&cpus_fixed_vproc0>; 102}; 103 104&cpu2 { 105 proc-supply = <&cpus_fixed_vproc1>; 106}; 107 108ð { 109 phy-mode = "rgmii-rxid"; 110 phy-handle = <ðernet_phy0>; 111 mediatek,tx-delay-ps = <1530>; 112 snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>; 113 snps,reset-delays-us = <0 10000 10000>; 114 pinctrl-names = "default", "sleep"; 115 pinctrl-0 = <ð_default>; 116 pinctrl-1 = <ð_sleep>; 117 status = "okay"; 118 119 mdio { 120 compatible = "snps,dwmac-mdio"; 121 #address-cells = <1>; 122 #size-cells = <0>; 123 ethernet_phy0: ethernet-phy@5 { 124 compatible = "ethernet-phy-id0243.0d90"; 125 reg = <0x5>; 126 }; 127 }; 128}; 129 130&pio { 131 eth_default: eth_default { 132 tx_pins { 133 pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>, 134 <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>, 135 <MT2712_PIN_73_GBE_TXD1__FUNC_GBE_TXD1>, 136 <MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0>, 137 <MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC>, 138 <MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN>; 139 drive-strength = <MTK_DRIVE_8mA>; 140 }; 141 rx_pins { 142 pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3>, 143 <MT2712_PIN_79_GBE_RXD2__FUNC_GBE_RXD2>, 144 <MT2712_PIN_80_GBE_RXD1__FUNC_GBE_RXD1>, 145 <MT2712_PIN_81_GBE_RXD0__FUNC_GBE_RXD0>, 146 <MT2712_PIN_82_GBE_RXDV__FUNC_GBE_RXDV>, 147 <MT2712_PIN_84_GBE_RXC__FUNC_GBE_RXC>; 148 input-enable; 149 }; 150 mdio_pins { 151 pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC>, 152 <MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO>; 153 drive-strength = <MTK_DRIVE_8mA>; 154 input-enable; 155 }; 156 }; 157 158 eth_sleep: eth_sleep { 159 tx_pins { 160 pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>, 161 <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>, 162 <MT2712_PIN_73_GBE_TXD1__FUNC_GPIO73>, 163 <MT2712_PIN_74_GBE_TXD0__FUNC_GPIO74>, 164 <MT2712_PIN_75_GBE_TXC__FUNC_GPIO75>, 165 <MT2712_PIN_76_GBE_TXEN__FUNC_GPIO76>; 166 }; 167 rx_pins { 168 pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GPIO78>, 169 <MT2712_PIN_79_GBE_RXD2__FUNC_GPIO79>, 170 <MT2712_PIN_80_GBE_RXD1__FUNC_GPIO80>, 171 <MT2712_PIN_81_GBE_RXD0__FUNC_GPIO81>, 172 <MT2712_PIN_82_GBE_RXDV__FUNC_GPIO82>, 173 <MT2712_PIN_84_GBE_RXC__FUNC_GPIO84>; 174 input-disable; 175 }; 176 mdio_pins { 177 pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GPIO85>, 178 <MT2712_PIN_86_GBE_MDIO__FUNC_GPIO86>; 179 input-disable; 180 bias-disable; 181 }; 182 }; 183 184 usb0_id_pins_float: usb0_iddig { 185 pins_iddig { 186 pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>; 187 bias-pull-up; 188 }; 189 }; 190 191 usb1_id_pins_float: usb1_iddig { 192 pins_iddig { 193 pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>; 194 bias-pull-up; 195 }; 196 }; 197}; 198 199&ssusb { 200 vbus-supply = <&usb_p0_vbus>; 201 extcon = <&extcon_usb>; 202 dr_mode = "otg"; 203 wakeup-source; 204 mediatek,u3p-dis-msk = <0x1>; 205 //enable-manual-drd; 206 //maximum-speed = "full-speed"; 207 pinctrl-names = "default"; 208 pinctrl-0 = <&usb0_id_pins_float>; 209 status = "okay"; 210}; 211 212&ssusb1 { 213 vbus-supply = <&usb_p1_vbus>; 214 extcon = <&extcon_usb1>; 215 dr_mode = "otg"; 216 //mediatek,u3p-dis-msk = <0x1>; 217 enable-manual-drd; 218 wakeup-source; 219 //maximum-speed = "full-speed"; 220 pinctrl-names = "default"; 221 pinctrl-0 = <&usb1_id_pins_float>; 222 status = "okay"; 223}; 224 225&uart0 { 226 status = "okay"; 227}; 228 229&usb_host0 { 230 vbus-supply = <&usb_p2_vbus>; 231 status = "okay"; 232}; 233 234&usb_host1 { 235 status = "okay"; 236}; 237