xref: /freebsd/sys/contrib/device-tree/src/arm64/allwinner/sun50i-h6-orangepi.dtsi (revision dd41de95a84d979615a2ef11df6850622bf6184e) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2// Copyright (C) 2018 Amarula Solutions
3// Author: Jagan Teki <jagan@amarulasolutions.com>
4
5/dts-v1/;
6
7#include "sun50i-h6.dtsi"
8
9#include <dt-bindings/gpio/gpio.h>
10
11/ {
12	model = "OrangePi One Plus";
13	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
14
15	aliases {
16		serial0 = &uart0;
17	};
18
19	chosen {
20		stdout-path = "serial0:115200n8";
21	};
22
23	connector {
24		compatible = "hdmi-connector";
25		type = "a";
26		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
27
28		port {
29			hdmi_con_in: endpoint {
30				remote-endpoint = <&hdmi_out_con>;
31			};
32		};
33	};
34
35	ext_osc32k: ext_osc32k_clk {
36		#clock-cells = <0>;
37		compatible = "fixed-clock";
38		clock-frequency = <32768>;
39		clock-output-names = "ext_osc32k";
40	};
41
42	leds {
43		compatible = "gpio-leds";
44
45		power {
46			label = "orangepi:red:power";
47			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
48			default-state = "on";
49		};
50
51		status {
52			label = "orangepi:green:status";
53			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
54		};
55	};
56
57	reg_vcc5v: vcc5v {
58		/* board wide 5V supply directly from the DC jack */
59		compatible = "regulator-fixed";
60		regulator-name = "vcc-5v";
61		regulator-min-microvolt = <5000000>;
62		regulator-max-microvolt = <5000000>;
63		regulator-always-on;
64	};
65};
66
67&de {
68	status = "okay";
69};
70
71&ehci0 {
72	status = "okay";
73};
74
75&ehci3 {
76	status = "okay";
77};
78
79&gpu {
80	mali-supply = <&reg_dcdcc>;
81	status = "okay";
82};
83
84&hdmi {
85	status = "okay";
86};
87
88&hdmi_out {
89	hdmi_out_con: endpoint {
90		remote-endpoint = <&hdmi_con_in>;
91	};
92};
93
94&mmc0 {
95	vmmc-supply = <&reg_cldo1>;
96	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
97	bus-width = <4>;
98	status = "okay";
99};
100
101&ohci0 {
102	status = "okay";
103};
104
105&ohci3 {
106	status = "okay";
107};
108
109&pio {
110	vcc-pc-supply = <&reg_bldo2>;
111	vcc-pd-supply = <&reg_cldo1>;
112	vcc-pg-supply = <&reg_aldo1>;
113};
114
115&r_i2c {
116	status = "okay";
117
118	axp805: pmic@36 {
119		compatible = "x-powers,axp805", "x-powers,axp806";
120		reg = <0x36>;
121		interrupt-parent = <&r_intc>;
122		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
123		interrupt-controller;
124		#interrupt-cells = <1>;
125		x-powers,self-working-mode;
126		vina-supply = <&reg_vcc5v>;
127		vinb-supply = <&reg_vcc5v>;
128		vinc-supply = <&reg_vcc5v>;
129		vind-supply = <&reg_vcc5v>;
130		vine-supply = <&reg_vcc5v>;
131		aldoin-supply = <&reg_vcc5v>;
132		bldoin-supply = <&reg_vcc5v>;
133		cldoin-supply = <&reg_vcc5v>;
134
135		regulators {
136			reg_aldo1: aldo1 {
137				regulator-always-on;
138				regulator-min-microvolt = <3300000>;
139				regulator-max-microvolt = <3300000>;
140				regulator-name = "vcc-pl";
141			};
142
143			reg_aldo2: aldo2 {
144				regulator-min-microvolt = <3300000>;
145				regulator-max-microvolt = <3300000>;
146				regulator-name = "vcc-ac200";
147			};
148
149			reg_aldo3: aldo3 {
150				regulator-always-on;
151				regulator-min-microvolt = <3300000>;
152				regulator-max-microvolt = <3300000>;
153				regulator-name = "vcc25-dram";
154			};
155
156			reg_bldo1: bldo1 {
157				regulator-always-on;
158				regulator-min-microvolt = <1800000>;
159				regulator-max-microvolt = <1800000>;
160				regulator-name = "vcc-bias-pll";
161			};
162
163			reg_bldo2: bldo2 {
164				regulator-always-on;
165				regulator-min-microvolt = <1800000>;
166				regulator-max-microvolt = <1800000>;
167				regulator-name = "vcc-efuse-pcie-hdmi-io";
168			};
169
170			reg_bldo3: bldo3 {
171				regulator-always-on;
172				regulator-min-microvolt = <1800000>;
173				regulator-max-microvolt = <1800000>;
174				regulator-name = "vcc-dcxoio";
175			};
176
177			bldo4 {
178				/* unused */
179			};
180
181			reg_cldo1: cldo1 {
182				regulator-always-on;
183				regulator-min-microvolt = <3300000>;
184				regulator-max-microvolt = <3300000>;
185				regulator-name = "vcc-3v3";
186			};
187
188			reg_cldo2: cldo2 {
189				regulator-min-microvolt = <3300000>;
190				regulator-max-microvolt = <3300000>;
191				regulator-name = "vcc-wifi-1";
192			};
193
194			reg_cldo3: cldo3 {
195				regulator-min-microvolt = <3300000>;
196				regulator-max-microvolt = <3300000>;
197				regulator-name = "vcc-wifi-2";
198			};
199
200			reg_dcdca: dcdca {
201				regulator-always-on;
202				regulator-min-microvolt = <810000>;
203				regulator-max-microvolt = <1080000>;
204				regulator-name = "vdd-cpu";
205			};
206
207			reg_dcdcc: dcdcc {
208				regulator-enable-ramp-delay = <32000>;
209				regulator-min-microvolt = <810000>;
210				regulator-max-microvolt = <1080000>;
211				regulator-name = "vdd-gpu";
212			};
213
214			reg_dcdcd: dcdcd {
215				regulator-always-on;
216				regulator-min-microvolt = <960000>;
217				regulator-max-microvolt = <960000>;
218				regulator-name = "vdd-sys";
219			};
220
221			reg_dcdce: dcdce {
222				regulator-always-on;
223				regulator-min-microvolt = <1200000>;
224				regulator-max-microvolt = <1200000>;
225				regulator-name = "vcc-dram";
226			};
227
228			sw {
229				/* unused */
230			};
231		};
232	};
233};
234
235&r_ir {
236	status = "okay";
237};
238
239&r_pio {
240	vcc-pm-supply = <&reg_bldo3>;
241};
242
243&rtc {
244	clocks = <&ext_osc32k>;
245};
246
247&uart0 {
248	pinctrl-names = "default";
249	pinctrl-0 = <&uart0_ph_pins>;
250	status = "okay";
251};
252
253&usb2otg {
254	/*
255	 * OrangePi Lite 2 and One Plus, where this DT is used, don't
256	 * have a controllable VBUS even though they do have an ID pin.
257	 * Using it as anything but a USB host is unsafe.
258	 */
259	dr_mode = "host";
260	status = "okay";
261};
262
263&usb2phy {
264	usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */
265	usb0_vbus-supply = <&reg_vcc5v>;
266	usb3_vbus-supply = <&reg_vcc5v>;
267	status = "okay";
268};
269