xref: /freebsd/sys/contrib/device-tree/Bindings/remoteproc/qcom,sdm845-adsp-pil.yaml (revision 5f4c09dd85bff675e0ca63c55ea3c517e0fddfcc) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/remoteproc/qcom,sdm845-adsp-pil.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm SDM845 ADSP Peripheral Image Loader
8
9maintainers:
10  - Bjorn Andersson <bjorn.andersson@linaro.org>
11
12description:
13  This document defines the binding for a component that loads and boots firmware
14  on the Qualcomm Technology Inc. ADSP.
15
16properties:
17  compatible:
18    enum:
19      - qcom,sdm845-adsp-pil
20
21  reg:
22    maxItems: 1
23    description:
24      The base address and size of the qdsp6ss register
25
26  interrupts:
27    items:
28      - description: Watchdog interrupt
29      - description: Fatal interrupt
30      - description: Ready interrupt
31      - description: Handover interrupt
32      - description: Stop acknowledge interrupt
33
34  interrupt-names:
35    items:
36      - const: wdog
37      - const: fatal
38      - const: ready
39      - const: handover
40      - const: stop-ack
41
42  clocks:
43    items:
44      - description: XO clock
45      - description: SWAY clock
46      - description: LPASS AHBS AON clock
47      - description: LPASS AHBM AON clock
48      - description: QDSP XO clock
49      - description: Q6SP6SS SLEEP clock
50      - description: Q6SP6SS CORE clock
51
52  clock-names:
53    items:
54      - const: xo
55      - const: sway_cbcr
56      - const: lpass_ahbs_aon_cbcr
57      - const: lpass_ahbm_aon_cbcr
58      - const: qdsp6ss_xo
59      - const: qdsp6ss_sleep
60      - const: qdsp6ss_core
61
62  power-domains:
63    items:
64      - description: CX power domain
65
66  resets:
67    items:
68      - description: PDC AUDIO SYNC RESET
69      - description: CC LPASS restart
70
71  reset-names:
72    items:
73      - const: pdc_sync
74      - const: cc_lpass
75
76  memory-region:
77    maxItems: 1
78    description: Reference to the reserved-memory for the Hexagon core
79
80  qcom,halt-regs:
81    $ref: /schemas/types.yaml#/definitions/phandle-array
82    description:
83      Phandle reference to a syscon representing TCSR followed by the
84      three offsets within syscon for q6, modem and nc halt registers.
85
86  qcom,smem-states:
87    $ref: /schemas/types.yaml#/definitions/phandle-array
88    description: States used by the AP to signal the Hexagon core
89    items:
90      - description: Stop the modem
91
92  qcom,smem-state-names:
93    description: The names of the state bits used for SMP2P output
94    items:
95      - const: stop
96
97required:
98  - compatible
99  - reg
100  - interrupts
101  - interrupt-names
102  - clocks
103  - clock-names
104  - power-domains
105  - resets
106  - reset-names
107  - qcom,halt-regs
108  - memory-region
109  - qcom,smem-states
110  - qcom,smem-state-names
111
112additionalProperties: false
113
114examples:
115  - |
116    #include <dt-bindings/interrupt-controller/arm-gic.h>
117    #include <dt-bindings/clock/qcom,rpmh.h>
118    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
119    #include <dt-bindings/clock/qcom,lpass-sdm845.h>
120    #include <dt-bindings/power/qcom-rpmpd.h>
121    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
122    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
123    remoteproc@17300000 {
124        compatible = "qcom,sdm845-adsp-pil";
125        reg = <0x17300000 0x40c>;
126
127        interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
128                <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
129                <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
130                <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
131                <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
132        interrupt-names = "wdog", "fatal", "ready",
133                "handover", "stop-ack";
134
135        clocks = <&rpmhcc RPMH_CXO_CLK>,
136                 <&gcc GCC_LPASS_SWAY_CLK>,
137                 <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
138                 <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
139                 <&lpasscc LPASS_QDSP6SS_XO_CLK>,
140                 <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
141                 <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
142        clock-names = "xo", "sway_cbcr",
143                "lpass_ahbs_aon_cbcr",
144                "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
145                "qdsp6ss_sleep", "qdsp6ss_core";
146
147        power-domains = <&rpmhpd SDM845_CX>;
148
149        resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
150                 <&aoss_reset AOSS_CC_LPASS_RESTART>;
151        reset-names = "pdc_sync", "cc_lpass";
152
153        qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
154
155        memory-region = <&pil_adsp_mem>;
156
157        qcom,smem-states = <&adsp_smp2p_out 0>;
158        qcom,smem-state-names = "stop";
159    };
160