1Qualcomm APQ8064 SATA PHY Controller 2------------------------------------ 3 4SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers. 5Each SATA PHY controller should have its own node. 6 7Required properties: 8- compatible: compatible list, contains "qcom,apq8064-sata-phy". 9- reg: offset and length of the SATA PHY register set; 10- #phy-cells: must be zero 11- clocks: a list of phandles and clock-specifier pairs, one for each entry in 12 clock-names. 13- clock-names: must be "cfg" for phy config clock. 14 15Example: 16 sata_phy: sata-phy@1b400000 { 17 compatible = "qcom,apq8064-sata-phy"; 18 reg = <0x1b400000 0x200>; 19 20 clocks = <&gcc SATA_PHY_CFG_CLK>; 21 clock-names = "cfg"; 22 23 #phy-cells = <0>; 24 }; 25