xref: /freebsd/sys/contrib/device-tree/Bindings/phy/allwinner,sun50i-h6-usb-phy.yaml (revision 8ddb146abcdf061be9f2c0db7e391697dafad85c) 
1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/phy/allwinner,sun50i-h6-usb-phy.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Allwinner H6 USB PHY Device Tree Bindings
8
9maintainers:
10  - Chen-Yu Tsai <wens@csie.org>
11  - Maxime Ripard <mripard@kernel.org>
12
13properties:
14  "#phy-cells":
15    const: 1
16
17  compatible:
18    const: allwinner,sun50i-h6-usb-phy
19
20  reg:
21    items:
22      - description: PHY Control registers
23      - description: PHY PMU0 registers
24      - description: PHY PMU3 registers
25
26  reg-names:
27    items:
28      - const: phy_ctrl
29      - const: pmu0
30      - const: pmu3
31
32  clocks:
33    items:
34      - description: USB OTG PHY bus clock
35      - description: USB Host PHY bus clock
36
37  clock-names:
38    items:
39      - const: usb0_phy
40      - const: usb3_phy
41
42  resets:
43    items:
44      - description: USB OTG reset
45      - description: USB Host Controller reset
46
47  reset-names:
48    items:
49      - const: usb0_reset
50      - const: usb3_reset
51
52  usb0_id_det-gpios:
53    maxItems: 1
54    description: GPIO to the USB OTG ID pin
55
56  usb0_vbus_det-gpios:
57    maxItems: 1
58    description: GPIO to the USB OTG VBUS detect pin
59
60  usb0_vbus_power-supply:
61    description: Power supply to detect the USB OTG VBUS
62
63  usb0_vbus-supply:
64    description: Regulator controlling USB OTG VBUS
65
66  usb3_vbus-supply:
67    description: Regulator controlling USB3 Host controller
68
69required:
70  - "#phy-cells"
71  - compatible
72  - clocks
73  - clock-names
74  - reg
75  - reg-names
76  - resets
77  - reset-names
78
79additionalProperties: false
80
81examples:
82  - |
83    #include <dt-bindings/gpio/gpio.h>
84    #include <dt-bindings/clock/sun50i-h6-ccu.h>
85    #include <dt-bindings/reset/sun50i-h6-ccu.h>
86
87    phy@5100400 {
88        #phy-cells = <1>;
89        compatible = "allwinner,sun50i-h6-usb-phy";
90        reg = <0x05100400 0x24>,
91              <0x05101800 0x4>,
92              <0x05311800 0x4>;
93        reg-names = "phy_ctrl",
94                    "pmu0",
95                    "pmu3";
96        clocks = <&ccu CLK_USB_PHY0>,
97                 <&ccu CLK_USB_PHY3>;
98        clock-names = "usb0_phy",
99                      "usb3_phy";
100        resets = <&ccu RST_USB_PHY0>,
101                 <&ccu RST_USB_PHY3>;
102        reset-names = "usb0_reset",
103                      "usb3_reset";
104        usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */
105        usb0_vbus-supply = <&reg_vcc5v>;
106        usb3_vbus-supply = <&reg_vcc5v>;
107    };
108