1IMX8 glue layer controller, NXP imx8 families support Synopsys MAC 5.10a IP. 2 3This file documents platform glue layer for IMX. 4Please see stmmac.txt for the other unchanged properties. 5 6The device node has following properties. 7 8Required properties: 9- compatible: Should be "nxp,imx8mp-dwmac-eqos" to select glue layer 10 and "snps,dwmac-5.10a" to select IP version. 11- clocks: Must contain a phandle for each entry in clock-names. 12- clock-names: Should be "stmmaceth" for the host clock. 13 Should be "pclk" for the MAC apb clock. 14 Should be "ptp_ref" for the MAC timer clock. 15 Should be "tx" for the MAC RGMII TX clock: 16 Should be "mem" for EQOS MEM clock. 17 - "mem" clock is required for imx8dxl platform. 18 - "mem" clock is not required for imx8mp platform. 19- interrupt-names: Should contain a list of interrupt names corresponding to 20 the interrupts in the interrupts property, if available. 21 Should be "macirq" for the main MAC IRQ 22 Should be "eth_wake_irq" for the IT which wake up system 23- intf_mode: Should be phandle/offset pair. The phandle to the syscon node which 24 encompases the GPR register, and the offset of the GPR register. 25 - required for imx8mp platform. 26 - is optional for imx8dxl platform. 27 28Optional properties: 29- intf_mode: is optional for imx8dxl platform. 30- snps,rmii_refclk_ext: to select RMII reference clock from external. 31 32Example: 33 eqos: ethernet@30bf0000 { 34 compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a"; 35 reg = <0x30bf0000 0x10000>; 36 interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, 37 <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; 38 interrupt-names = "eth_wake_irq", "macirq"; 39 clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>, 40 <&clk IMX8MP_CLK_QOS_ENET_ROOT>, 41 <&clk IMX8MP_CLK_ENET_QOS_TIMER>, 42 <&clk IMX8MP_CLK_ENET_QOS>; 43 clock-names = "stmmaceth", "pclk", "ptp_ref", "tx"; 44 assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>, 45 <&clk IMX8MP_CLK_ENET_QOS_TIMER>, 46 <&clk IMX8MP_CLK_ENET_QOS>; 47 assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>, 48 <&clk IMX8MP_SYS_PLL2_100M>, 49 <&clk IMX8MP_SYS_PLL2_125M>; 50 assigned-clock-rates = <0>, <100000000>, <125000000>; 51 nvmem-cells = <ð_mac0>; 52 nvmem-cell-names = "mac-address"; 53 nvmem_macaddr_swap; 54 intf_mode = <&gpr 0x4>; 55 status = "disabled"; 56 }; 57