1* MELFAS MIP4 Touchscreen 2 3Required properties: 4- compatible: must be "melfas,mip4_ts" 5- reg: I2C slave address of the chip (0x48 or 0x34) 6- interrupts: interrupt to which the chip is connected 7 8Optional properties: 9- ce-gpios: GPIO connected to the CE (chip enable) pin of the chip 10 11Example: 12 i2c@00000000 { 13 touchscreen: melfas_mip4@48 { 14 compatible = "melfas,mip4_ts"; 15 reg = <0x48>; 16 interrupt-parent = <&gpio>; 17 interrupts = <0 IRQ_TYPE_EDGE_FALLING>; 18 ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; 19 }; 20 }; 21