1* Texas Instruments LMP91000 series of potentiostats 2 3LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf 4LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf 5 6Required properties: 7 8 - compatible: should be one of the following: 9 "ti,lmp91000" 10 "ti,lmp91002" 11 - reg: the I2C address of the device 12 - io-channels: the phandle of the iio provider 13 14 - ti,external-tia-resistor: if the property ti,tia-gain-ohm is not defined this 15 needs to be set to signal that an external resistor value is being used. 16 17Optional properties: 18 19 - ti,tia-gain-ohm: ohm value of the internal resistor for the transimpedance 20 amplifier. Must be 2750, 3500, 7000, 14000, 35000, 120000, or 350000 ohms. 21 22 - ti,rload-ohm: ohm value of the internal resistor load applied to the gas 23 sensor. Must be 10, 33, 50, or 100 (default) ohms. 24 25Example: 26 27lmp91000@48 { 28 compatible = "ti,lmp91000"; 29 reg = <0x48>; 30 ti,tia-gain-ohm = <7500>; 31 ti,rload = <100>; 32 io-channels = <&adc>; 33}; 34