xref: /freebsd/sys/contrib/device-tree/Bindings/display/bridge/ti,sn65dsi86.yaml (revision 8aac90f18aef7c9eea906c3ff9a001ca7b94f375) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: SN65DSI86 DSI to eDP bridge chip
8
9maintainers:
10  - Sandeep Panda <spanda@codeaurora.org>
11
12description: |
13  The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
14  https://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
15
16properties:
17  compatible:
18    const: ti,sn65dsi86
19
20  reg:
21    enum: [ 0x2c, 0x2d ]
22
23  enable-gpios:
24    maxItems: 1
25    description: GPIO specifier for bridge_en pin (active high).
26
27  suspend-gpios:
28    maxItems: 1
29    description: GPIO specifier for GPIO1 pin on bridge (active low).
30
31  no-hpd:
32    type: boolean
33    description:
34      Set if the HPD line on the bridge isn't hooked up to anything or is
35      otherwise unusable.
36
37  vccio-supply:
38    description: A 1.8V supply that powers the digital IOs.
39
40  vpll-supply:
41    description: A 1.8V supply that powers the DisplayPort PLL.
42
43  vcca-supply:
44    description: A 1.2V supply that powers the analog circuits.
45
46  vcc-supply:
47    description: A 1.2V supply that powers the digital core.
48
49  interrupts:
50    maxItems: 1
51
52  clocks:
53    maxItems: 1
54    description:
55      Clock specifier for input reference clock. The reference clock rate must
56      be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
57
58  clock-names:
59    const: refclk
60
61  gpio-controller: true
62  '#gpio-cells':
63    const: 2
64    description:
65      First cell is pin number, second cell is flags.  GPIO pin numbers are
66      1-based to match the datasheet.  See ../../gpio/gpio.txt for more
67      information.
68
69  '#pwm-cells':
70    const: 1
71    description: See ../../pwm/pwm.yaml for description of the cell formats.
72
73  aux-bus:
74    $ref: /schemas/display/dp-aux-bus.yaml#
75
76  ports:
77    $ref: /schemas/graph.yaml#/properties/ports
78
79    properties:
80      port@0:
81        $ref: /schemas/graph.yaml#/properties/port
82        description:
83          Video port for MIPI DSI input
84
85      port@1:
86        $ref: /schemas/graph.yaml#/$defs/port-base
87        unevaluatedProperties: false
88        description:
89          Video port for eDP output (panel or connector).
90
91        properties:
92          endpoint:
93            $ref: /schemas/media/video-interfaces.yaml#
94            unevaluatedProperties: false
95
96            properties:
97              data-lanes:
98                oneOf:
99                  - minItems: 1
100                    maxItems: 1
101                    uniqueItems: true
102                    items:
103                      enum:
104                        - 0
105                        - 1
106                    description:
107                      If you have 1 logical lane the bridge supports routing
108                      to either port 0 or port 1.  Port 0 is suggested.
109
110                  - minItems: 2
111                    maxItems: 2
112                    uniqueItems: true
113                    items:
114                      enum:
115                        - 0
116                        - 1
117                    description:
118                      If you have 2 logical lanes the bridge supports
119                      reordering but only on physical ports 0 and 1.
120
121                  - minItems: 4
122                    maxItems: 4
123                    uniqueItems: true
124                    items:
125                      enum:
126                        - 0
127                        - 1
128                        - 2
129                        - 3
130                    description:
131                      If you have 4 logical lanes the bridge supports
132                      reordering in any way.
133
134              lane-polarities:
135                minItems: 1
136                maxItems: 4
137                items:
138                  enum:
139                    - 0
140                    - 1
141
142            dependencies:
143              lane-polarities: [data-lanes]
144
145    required:
146      - port@0
147      - port@1
148
149required:
150  - compatible
151  - reg
152  - vccio-supply
153  - vpll-supply
154  - vcca-supply
155  - vcc-supply
156  - ports
157
158additionalProperties: false
159
160examples:
161  - |
162    #include <dt-bindings/clock/qcom,rpmh.h>
163    #include <dt-bindings/gpio/gpio.h>
164    #include <dt-bindings/interrupt-controller/irq.h>
165
166    i2c {
167      #address-cells = <1>;
168      #size-cells = <0>;
169
170      bridge@2d {
171        compatible = "ti,sn65dsi86";
172        reg = <0x2d>;
173
174        interrupt-parent = <&tlmm>;
175        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
176
177        enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
178
179        vpll-supply = <&src_pp1800_s4a>;
180        vccio-supply = <&src_pp1800_s4a>;
181        vcca-supply = <&src_pp1200_l2a>;
182        vcc-supply = <&src_pp1200_l2a>;
183
184        clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
185        clock-names = "refclk";
186
187        no-hpd;
188
189        ports {
190          #address-cells = <1>;
191          #size-cells = <0>;
192
193          port@0 {
194            reg = <0>;
195            endpoint {
196              remote-endpoint = <&dsi0_out>;
197            };
198          };
199
200          port@1 {
201            reg = <1>;
202            sn65dsi86_out: endpoint {
203              remote-endpoint = <&panel_in_edp>;
204            };
205          };
206        };
207
208        aux-bus {
209          panel {
210            compatible = "boe,nv133fhm-n62";
211            power-supply = <&pp3300_dx_edp>;
212            backlight = <&backlight>;
213            hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
214
215            port {
216              panel_in_edp: endpoint {
217                remote-endpoint = <&sn65dsi86_out>;
218              };
219            };
220          };
221        };
222      };
223    };
224  - |
225    #include <dt-bindings/clock/qcom,rpmh.h>
226    #include <dt-bindings/gpio/gpio.h>
227    #include <dt-bindings/interrupt-controller/irq.h>
228
229    i2c {
230      #address-cells = <1>;
231      #size-cells = <0>;
232
233      bridge@2d {
234        compatible = "ti,sn65dsi86";
235        reg = <0x2d>;
236
237        enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
238        suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
239
240        interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
241
242        vccio-supply = <&pm8916_l17>;
243        vcca-supply = <&pm8916_l6>;
244        vpll-supply = <&pm8916_l17>;
245        vcc-supply = <&pm8916_l6>;
246
247        clock-names = "refclk";
248        clocks = <&input_refclk>;
249
250        ports {
251          #address-cells = <1>;
252          #size-cells = <0>;
253
254          port@0 {
255            reg = <0>;
256
257            edp_bridge_in: endpoint {
258              remote-endpoint = <&dsi_out>;
259            };
260          };
261
262          port@1 {
263            reg = <1>;
264
265            edp_bridge_out: endpoint {
266              data-lanes = <2 1 3 0>;
267              lane-polarities = <0 1 0 1>;
268              remote-endpoint = <&edp_panel_in>;
269            };
270          };
271        };
272      };
273    };
274