xref: /freebsd/sys/contrib/device-tree/Bindings/display/bridge/nwl-dsi.yaml (revision 5def4c47d4bd90b209b9b4a4ba9faec15846d8fd) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Northwest Logic MIPI-DSI controller on i.MX SoCs
8
9maintainers:
10  - Guido Gúnther <agx@sigxcpu.org>
11  - Robert Chiras <robert.chiras@nxp.com>
12
13description: |
14  NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for
15  the SOCs NWL MIPI-DSI host controller.
16
17allOf:
18  - $ref: ../dsi-controller.yaml#
19
20properties:
21  compatible:
22    const: fsl,imx8mq-nwl-dsi
23
24  reg:
25    maxItems: 1
26
27  interrupts:
28    maxItems: 1
29
30  '#address-cells':
31    const: 1
32
33  '#size-cells':
34    const: 0
35
36  assigned-clock-parents: true
37  assigned-clock-rates: true
38  assigned-clocks: true
39
40  clocks:
41    items:
42      - description: DSI core clock
43      - description: RX_ESC clock (used in escape mode)
44      - description: TX_ESC clock (used in escape mode)
45      - description: PHY_REF clock
46      - description: LCDIF clock
47
48  clock-names:
49    items:
50      - const: core
51      - const: rx_esc
52      - const: tx_esc
53      - const: phy_ref
54      - const: lcdif
55
56  mux-controls:
57    description:
58      mux controller node to use for operating the input mux
59
60  phys:
61    maxItems: 1
62    description:
63      A phandle to the phy module representing the DPHY
64
65  phy-names:
66    items:
67      - const: dphy
68
69  power-domains:
70    maxItems: 1
71
72  resets:
73    items:
74      - description: dsi byte reset line
75      - description: dsi dpi reset line
76      - description: dsi esc reset line
77      - description: dsi pclk reset line
78
79  reset-names:
80    items:
81      - const: byte
82      - const: dpi
83      - const: esc
84      - const: pclk
85
86  ports:
87    $ref: /schemas/graph.yaml#/properties/ports
88
89    properties:
90      port@0:
91        $ref: /schemas/graph.yaml#/$defs/port-base
92        description:
93          Input port node to receive pixel data from the
94          display controller. Exactly one endpoint must be
95          specified.
96        properties:
97          endpoint@0:
98            $ref: /schemas/graph.yaml#/properties/endpoint
99            description: sub-node describing the input from LCDIF
100
101          endpoint@1:
102            $ref: /schemas/graph.yaml#/properties/endpoint
103            description: sub-node describing the input from DCSS
104
105        oneOf:
106          - required:
107              - endpoint@0
108          - required:
109              - endpoint@1
110
111        unevaluatedProperties: false
112
113      port@1:
114        $ref: /schemas/graph.yaml#/properties/port
115        description:
116          DSI output port node to the panel or the next bridge
117          in the chain
118
119    required:
120      - port@0
121      - port@1
122
123required:
124  - '#address-cells'
125  - '#size-cells'
126  - clock-names
127  - clocks
128  - compatible
129  - interrupts
130  - mux-controls
131  - phy-names
132  - phys
133  - ports
134  - reg
135  - reset-names
136  - resets
137
138unevaluatedProperties: false
139
140examples:
141  - |
142    #include <dt-bindings/clock/imx8mq-clock.h>
143    #include <dt-bindings/gpio/gpio.h>
144    #include <dt-bindings/interrupt-controller/arm-gic.h>
145    #include <dt-bindings/reset/imx8mq-reset.h>
146
147    dsi@30a00000 {
148              #address-cells = <1>;
149              #size-cells = <0>;
150              compatible = "fsl,imx8mq-nwl-dsi";
151              reg = <0x30A00000 0x300>;
152              clocks = <&clk IMX8MQ_CLK_DSI_CORE>,
153                       <&clk IMX8MQ_CLK_DSI_AHB>,
154                       <&clk IMX8MQ_CLK_DSI_IPG_DIV>,
155                       <&clk IMX8MQ_CLK_DSI_PHY_REF>,
156                       <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
157              clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif";
158              interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
159              mux-controls = <&mux 0>;
160              power-domains = <&pgc_mipi>;
161              resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>,
162                       <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>,
163                       <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>,
164                       <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>;
165              reset-names = "byte", "dpi", "esc", "pclk";
166              phys = <&dphy>;
167              phy-names = "dphy";
168
169              panel@0 {
170                      compatible = "rocktech,jh057n00900";
171                      reg = <0>;
172                      vcc-supply = <&reg_2v8_p>;
173                      iovcc-supply = <&reg_1v8_p>;
174                      reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
175                      port {
176                           panel_in: endpoint {
177                                     remote-endpoint = <&mipi_dsi_out>;
178                           };
179                      };
180              };
181
182              ports {
183                    #address-cells = <1>;
184                    #size-cells = <0>;
185
186                    port@0 {
187                           #size-cells = <0>;
188                           #address-cells = <1>;
189                           reg = <0>;
190                           mipi_dsi_in: endpoint@0 {
191                                        reg = <0>;
192                                        remote-endpoint = <&lcdif_mipi_dsi>;
193                           };
194                    };
195                    port@1 {
196                           reg = <1>;
197                           mipi_dsi_out: endpoint {
198                                         remote-endpoint = <&panel_in>;
199                           };
200                    };
201              };
202    };
203