1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/clock/imx6q-clock.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Clock bindings for Freescale i.MX6 Quad 8 9maintainers: 10 - Anson Huang <Anson.Huang@nxp.com> 11 12properties: 13 compatible: 14 const: fsl,imx6q-ccm 15 16 reg: 17 maxItems: 1 18 19 interrupts: 20 description: CCM provides 2 interrupt requests, request 1 is to generate 21 interrupt for frequency or mux change, request 2 is to generate 22 interrupt for oscillator read or PLL lock. 23 items: 24 - description: CCM interrupt request 1 25 - description: CCM interrupt request 2 26 27 '#clock-cells': 28 const: 1 29 30 clocks: 31 items: 32 - description: 24m osc 33 - description: 32k osc 34 - description: ckih1 clock input 35 - description: anaclk1 clock input 36 - description: anaclk2 clock input 37 38 clock-names: 39 items: 40 - const: osc 41 - const: ckil 42 - const: ckih1 43 - const: anaclk1 44 - const: anaclk2 45 46 fsl,pmic-stby-poweroff: 47 $ref: /schemas/types.yaml#/definitions/flag 48 description: | 49 Use this property if the SoC should be powered off by external power 50 management IC (PMIC) triggered via PMIC_STBY_REQ signal. 51 Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should 52 be using "syscon-poweroff" driver instead. 53 54required: 55 - compatible 56 - reg 57 - interrupts 58 - '#clock-cells' 59 60examples: 61 # Clock Control Module node: 62 - | 63 #include <dt-bindings/interrupt-controller/arm-gic.h> 64 65 clock-controller@20c4000 { 66 compatible = "fsl,imx6q-ccm"; 67 reg = <0x020c4000 0x4000>; 68 interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, 69 <0 88 IRQ_TYPE_LEVEL_HIGH>; 70 #clock-cells = <1>; 71 }; 72