xref: /freebsd/sys/contrib/dev/iwlwifi/fw/api/phy.h (revision 1da7f3f6f72b2245e458fc7195733268ae4a1136)
1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
2 /*
3  * Copyright (C) 2012-2014, 2019-2022 Intel Corporation
4  * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
5  * Copyright (C) 2016-2017 Intel Deutschland GmbH
6  */
7 #ifndef __iwl_fw_api_phy_h__
8 #define __iwl_fw_api_phy_h__
9 
10 /**
11  * enum iwl_phy_ops_subcmd_ids - PHY group commands
12  */
13 enum iwl_phy_ops_subcmd_ids {
14 	/**
15 	 * @CMD_DTS_MEASUREMENT_TRIGGER_WIDE:
16 	 * Uses either &struct iwl_dts_measurement_cmd or
17 	 * &struct iwl_ext_dts_measurement_cmd
18 	 */
19 	CMD_DTS_MEASUREMENT_TRIGGER_WIDE = 0x0,
20 
21 	/**
22 	 * @CTDP_CONFIG_CMD: &struct iwl_mvm_ctdp_cmd
23 	 */
24 	CTDP_CONFIG_CMD = 0x03,
25 
26 	/**
27 	 * @TEMP_REPORTING_THRESHOLDS_CMD: &struct temp_report_ths_cmd
28 	 */
29 	TEMP_REPORTING_THRESHOLDS_CMD = 0x04,
30 
31 	/**
32 	 * @PER_CHAIN_LIMIT_OFFSET_CMD: &struct iwl_geo_tx_power_profiles_cmd_v1,
33 	 * &struct iwl_geo_tx_power_profiles_cmd_v2,
34 	 * &struct iwl_geo_tx_power_profiles_cmd_v3,
35 	 * &struct iwl_geo_tx_power_profiles_cmd_v4 or
36 	 * &struct iwl_geo_tx_power_profiles_cmd_v5
37 	 */
38 	PER_CHAIN_LIMIT_OFFSET_CMD = 0x05,
39 
40 	/**
41 	 * @PER_PLATFORM_ANT_GAIN_CMD: &union iwl_ppag_table_cmd
42 	 */
43 	PER_PLATFORM_ANT_GAIN_CMD = 0x07,
44 
45 	/**
46 	 * @CT_KILL_NOTIFICATION: &struct ct_kill_notif
47 	 */
48 	CT_KILL_NOTIFICATION = 0xFE,
49 
50 	/**
51 	 * @DTS_MEASUREMENT_NOTIF_WIDE:
52 	 * &struct iwl_dts_measurement_notif_v1 or
53 	 * &struct iwl_dts_measurement_notif_v2
54 	 */
55 	DTS_MEASUREMENT_NOTIF_WIDE = 0xFF,
56 };
57 
58 /* DTS measurements */
59 
60 enum iwl_dts_measurement_flags {
61 	DTS_TRIGGER_CMD_FLAGS_TEMP	= BIT(0),
62 	DTS_TRIGGER_CMD_FLAGS_VOLT	= BIT(1),
63 };
64 
65 /**
66  * struct iwl_dts_measurement_cmd - request DTS temp and/or voltage measurements
67  *
68  * @flags: indicates which measurements we want as specified in
69  *	&enum iwl_dts_measurement_flags
70  */
71 struct iwl_dts_measurement_cmd {
72 	__le32 flags;
73 } __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_CMD_S */
74 
75 /**
76 * enum iwl_dts_control_measurement_mode - DTS measurement type
77 * @DTS_AUTOMATIC: Automatic mode (full SW control). Provide temperature read
78 *                 back (latest value. Not waiting for new value). Use automatic
79 *                 SW DTS configuration.
80 * @DTS_REQUEST_READ: Request DTS read. Configure DTS with manual settings,
81 *                    trigger DTS reading and provide read back temperature read
82 *                    when available.
83 * @DTS_OVER_WRITE: over-write the DTS temperatures in the SW until next read
84 * @DTS_DIRECT_WITHOUT_MEASURE: DTS returns its latest temperature result,
85 *                              without measurement trigger.
86 */
87 enum iwl_dts_control_measurement_mode {
88 	DTS_AUTOMATIC			= 0,
89 	DTS_REQUEST_READ		= 1,
90 	DTS_OVER_WRITE			= 2,
91 	DTS_DIRECT_WITHOUT_MEASURE	= 3,
92 };
93 
94 /**
95 * enum iwl_dts_used - DTS to use or used for measurement in the DTS request
96 * @DTS_USE_TOP: Top
97 * @DTS_USE_CHAIN_A: chain A
98 * @DTS_USE_CHAIN_B: chain B
99 * @DTS_USE_CHAIN_C: chain C
100 * @XTAL_TEMPERATURE: read temperature from xtal
101 */
102 enum iwl_dts_used {
103 	DTS_USE_TOP		= 0,
104 	DTS_USE_CHAIN_A		= 1,
105 	DTS_USE_CHAIN_B		= 2,
106 	DTS_USE_CHAIN_C		= 3,
107 	XTAL_TEMPERATURE	= 4,
108 };
109 
110 /**
111 * enum iwl_dts_bit_mode - bit-mode to use in DTS request read mode
112 * @DTS_BIT6_MODE: bit 6 mode
113 * @DTS_BIT8_MODE: bit 8 mode
114 */
115 enum iwl_dts_bit_mode {
116 	DTS_BIT6_MODE	= 0,
117 	DTS_BIT8_MODE	= 1,
118 };
119 
120 /**
121  * struct iwl_ext_dts_measurement_cmd - request extended DTS temp measurements
122  * @control_mode: see &enum iwl_dts_control_measurement_mode
123  * @temperature: used when over write DTS mode is selected
124  * @sensor: set temperature sensor to use. See &enum iwl_dts_used
125  * @avg_factor: average factor to DTS in request DTS read mode
126  * @bit_mode: value defines the DTS bit mode to use. See &enum iwl_dts_bit_mode
127  * @step_duration: step duration for the DTS
128  */
129 struct iwl_ext_dts_measurement_cmd {
130 	__le32 control_mode;
131 	__le32 temperature;
132 	__le32 sensor;
133 	__le32 avg_factor;
134 	__le32 bit_mode;
135 	__le32 step_duration;
136 } __packed; /* XVT_FW_DTS_CONTROL_MEASUREMENT_REQUEST_API_S */
137 
138 /**
139  * struct iwl_dts_measurement_notif_v1 - measurements notification
140  *
141  * @temp: the measured temperature
142  * @voltage: the measured voltage
143  */
144 struct iwl_dts_measurement_notif_v1 {
145 	__le32 temp;
146 	__le32 voltage;
147 } __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_1*/
148 
149 /**
150  * struct iwl_dts_measurement_notif_v2 - measurements notification
151  *
152  * @temp: the measured temperature
153  * @voltage: the measured voltage
154  * @threshold_idx: the trip index that was crossed
155  */
156 struct iwl_dts_measurement_notif_v2 {
157 	__le32 temp;
158 	__le32 voltage;
159 	__le32 threshold_idx;
160 } __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_2 */
161 
162 /**
163  * struct iwl_dts_measurement_resp - measurements response
164  *
165  * @temp: the measured temperature
166  */
167 struct iwl_dts_measurement_resp {
168 	__le32 temp;
169 } __packed; /* CMD_DTS_MEASUREMENT_RSP_API_S_VER_1 */
170 
171 /**
172  * struct ct_kill_notif - CT-kill entry notification
173  * This structure represent both versions of this notification.
174  *
175  * @temperature: the current temperature in celsius
176  * @dts: only in v2: DTS that trigger the CT Kill bitmap:
177  *			bit 0: ToP master
178  *			bit 1: PA chain A master
179  *			bit 2: PA chain B master
180  *			bit 3: ToP slave
181  *			bit 4: PA chain A slave
182  *			bit 5: PA chain B slave)
183  *			bits 6,7: reserved (set to 0)
184  * @scheme: only for v2: scheme that trigger the CT Kill (0-SW, 1-HW)
185  */
186 struct ct_kill_notif {
187 	__le16 temperature;
188 	u8 dts;
189 	u8 scheme;
190 } __packed; /* CT_KILL_NOTIFICATION_API_S_VER_1, CT_KILL_NOTIFICATION_API_S_VER_2 */
191 
192 /**
193 * enum ctdp_cmd_operation - CTDP command operations
194 * @CTDP_CMD_OPERATION_START: update the current budget
195 * @CTDP_CMD_OPERATION_STOP: stop ctdp
196 * @CTDP_CMD_OPERATION_REPORT: get the average budget
197 */
198 enum iwl_mvm_ctdp_cmd_operation {
199 	CTDP_CMD_OPERATION_START	= 0x1,
200 	CTDP_CMD_OPERATION_STOP		= 0x2,
201 	CTDP_CMD_OPERATION_REPORT	= 0x4,
202 };/* CTDP_CMD_OPERATION_TYPE_E */
203 
204 /**
205  * struct iwl_mvm_ctdp_cmd - track and manage the FW power consumption budget
206  *
207  * @operation: see &enum iwl_mvm_ctdp_cmd_operation
208  * @budget: the budget in milliwatt
209  * @window_size: defined in API but not used
210  */
211 struct iwl_mvm_ctdp_cmd {
212 	__le32 operation;
213 	__le32 budget;
214 	__le32 window_size;
215 } __packed;
216 
217 #define IWL_MAX_DTS_TRIPS	8
218 
219 /**
220  * struct temp_report_ths_cmd - set temperature thresholds
221  *
222  * @num_temps: number of temperature thresholds passed
223  * @thresholds: array with the thresholds to be configured
224  */
225 struct temp_report_ths_cmd {
226 	__le32 num_temps;
227 	__le16 thresholds[IWL_MAX_DTS_TRIPS];
228 } __packed; /* GRP_PHY_TEMP_REPORTING_THRESHOLDS_CMD */
229 
230 #endif /* __iwl_fw_api_phy_h__ */
231