1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45 46# Debugging options. 47ALT_BREAK_TO_DEBUGGER opt_kdb.h 48BREAK_TO_DEBUGGER opt_kdb.h 49BUF_TRACKING opt_global.h 50DDB 51DDB_BUFR_SIZE opt_ddb.h 52DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 53DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 54DDB_CTF opt_ddb.h 55DDB_NUMSYM opt_ddb.h 56EARLY_PRINTF opt_global.h 57FULL_BUF_TRACKING opt_global.h 58GDB 59KDB opt_global.h 60KDB_TRACE opt_kdb.h 61KDB_UNATTENDED opt_kdb.h 62KLD_DEBUG opt_kld.h 63NUM_CORE_FILES opt_global.h 64QUEUE_MACRO_DEBUG_TRACE opt_global.h 65QUEUE_MACRO_DEBUG_TRASH opt_global.h 66SYSCTL_DEBUG opt_sysctl.h 67TEXTDUMP_PREFERRED opt_ddb.h 68TEXTDUMP_VERBOSE opt_ddb.h 69TSLOG opt_global.h 70TSLOGSIZE opt_global.h 71 72# Miscellaneous options. 73ALQ 74ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 75ATSE_CFI_HACK opt_cfi.h 76AUDIT opt_global.h 77BOOTHOWTO opt_global.h 78BOOTVERBOSE opt_global.h 79CALLOUT_PROFILING 80CAPABILITIES opt_capsicum.h 81CAPABILITY_MODE opt_capsicum.h 82CC_CDG opt_global.h 83CC_CHD opt_global.h 84CC_CUBIC opt_global.h 85CC_DEFAULT opt_cc.h 86CC_DCTCP opt_global.h 87CC_HD opt_global.h 88CC_HTCP opt_global.h 89CC_NEWRENO opt_global.h 90CC_VEGAS opt_global.h 91COMPAT_43 opt_global.h 92COMPAT_43TTY opt_global.h 93COMPAT_FREEBSD4 opt_global.h 94COMPAT_FREEBSD5 opt_global.h 95COMPAT_FREEBSD6 opt_global.h 96COMPAT_FREEBSD7 opt_global.h 97COMPAT_FREEBSD9 opt_global.h 98COMPAT_FREEBSD10 opt_global.h 99COMPAT_FREEBSD11 opt_global.h 100COMPAT_FREEBSD12 opt_global.h 101COMPAT_FREEBSD13 opt_global.h 102COMPAT_LINUXKPI opt_dontuse.h 103_COMPAT_LINUX32 opt_compat.h # XXX: make sure opt_compat.h exists 104COMPILING_LINT opt_global.h 105CY_PCI_FASTINTR 106DEADLKRES opt_watchdog.h 107EXPERIMENTAL opt_global.h 108EXT_RESOURCES opt_global.h 109DIRECTIO 110FILEMON opt_dontuse.h 111FFCLOCK 112FULL_PREEMPTION opt_sched.h 113GZIO opt_gzio.h 114IMAGACT_BINMISC opt_dontuse.h 115IPI_PREEMPTION opt_sched.h 116GEOM_BDE opt_geom.h 117GEOM_CACHE opt_geom.h 118GEOM_CONCAT opt_geom.h 119GEOM_ELI opt_geom.h 120GEOM_GATE opt_geom.h 121GEOM_JOURNAL opt_geom.h 122GEOM_LABEL opt_geom.h 123GEOM_LABEL_GPT opt_geom.h 124GEOM_LINUX_LVM opt_geom.h 125GEOM_MAP opt_geom.h 126GEOM_MIRROR opt_geom.h 127GEOM_MOUNTVER opt_geom.h 128GEOM_MULTIPATH opt_geom.h 129GEOM_NOP opt_geom.h 130GEOM_PART_APM opt_geom.h 131GEOM_PART_BSD opt_geom.h 132GEOM_PART_BSD64 opt_geom.h 133GEOM_PART_EBR opt_geom.h 134GEOM_PART_GPT opt_geom.h 135GEOM_PART_LDM opt_geom.h 136GEOM_PART_MBR opt_geom.h 137GEOM_PART_VTOC8 opt_geom.h 138GEOM_RAID opt_geom.h 139GEOM_RAID3 opt_geom.h 140GEOM_SHSEC opt_geom.h 141GEOM_STRIPE opt_geom.h 142GEOM_UZIP opt_geom.h 143GEOM_UZIP_DEBUG opt_geom.h 144GEOM_VINUM opt_geom.h 145GEOM_VIRSTOR opt_geom.h 146GEOM_ZERO opt_geom.h 147IFLIB opt_iflib.h 148KDTRACE_HOOKS opt_global.h 149KDTRACE_FRAME opt_kdtrace.h 150KN_HASHSIZE opt_kqueue.h 151KSTACK_MAX_PAGES 152KSTACK_PAGES 153KSTACK_USAGE_PROF 154KTRACE 155KTRACE_REQUEST_POOL opt_ktrace.h 156LIBICONV 157MAC opt_global.h 158MAC_BIBA opt_dontuse.h 159MAC_BSDEXTENDED opt_dontuse.h 160MAC_IFOFF opt_dontuse.h 161MAC_LOMAC opt_dontuse.h 162MAC_MLS opt_dontuse.h 163MAC_NONE opt_dontuse.h 164MAC_NTPD opt_dontuse.h 165MAC_PARTITION opt_dontuse.h 166MAC_PORTACL opt_dontuse.h 167MAC_SEEOTHERUIDS opt_dontuse.h 168MAC_STATIC opt_mac.h 169MAC_STUB opt_dontuse.h 170MAC_TEST opt_dontuse.h 171MAC_VERIEXEC opt_dontuse.h 172MAC_VERIEXEC_SHA1 opt_dontuse.h 173MAC_VERIEXEC_SHA256 opt_dontuse.h 174MAC_VERIEXEC_SHA384 opt_dontuse.h 175MAC_VERIEXEC_SHA512 opt_dontuse.h 176MD_ROOT opt_md.h 177MD_ROOT_FSTYPE opt_md.h 178MD_ROOT_READONLY opt_md.h 179MD_ROOT_SIZE opt_md.h 180MD_ROOT_MEM opt_md.h 181MFI_DEBUG opt_mfi.h 182MFI_DECODE_LOG opt_mfi.h 183MPROF_BUFFERS opt_mprof.h 184MPROF_HASH_SIZE opt_mprof.h 185NEW_PCIB opt_global.h 186NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 187NO_ADAPTIVE_RWLOCKS 188NO_ADAPTIVE_SX 189NO_OBSOLETE_CODE opt_global.h 190NO_SYSCTL_DESCR opt_global.h 191NSWBUF_MIN opt_param.h 192MBUF_PACKET_ZONE_DISABLE opt_global.h 193PANIC_REBOOT_WAIT_TIME opt_panic.h 194PCI_HP opt_pci.h 195PCI_IOV opt_global.h 196PPC_DEBUG opt_ppc.h 197PPC_PROBE_CHIPSET opt_ppc.h 198PPS_SYNC opt_ntp.h 199PREEMPTION opt_sched.h 200QUOTA 201SCHED_4BSD opt_sched.h 202SCHED_STATS opt_sched.h 203SCHED_ULE opt_sched.h 204SLEEPQUEUE_PROFILING 205SLHCI_DEBUG opt_slhci.h 206STACK opt_stack.h 207SUIDDIR 208MSGMNB opt_sysvipc.h 209MSGMNI opt_sysvipc.h 210MSGSEG opt_sysvipc.h 211MSGSSZ opt_sysvipc.h 212MSGTQL opt_sysvipc.h 213SEMMNI opt_sysvipc.h 214SEMMNS opt_sysvipc.h 215SEMMNU opt_sysvipc.h 216SEMMSL opt_sysvipc.h 217SEMOPM opt_sysvipc.h 218SEMUME opt_sysvipc.h 219SHMALL opt_sysvipc.h 220SHMMAX opt_sysvipc.h 221SHMMAXPGS opt_sysvipc.h 222SHMMIN opt_sysvipc.h 223SHMMNI opt_sysvipc.h 224SHMSEG opt_sysvipc.h 225SYSVMSG opt_sysvipc.h 226SYSVSEM opt_sysvipc.h 227SYSVSHM opt_sysvipc.h 228SW_WATCHDOG opt_watchdog.h 229TCPHPTS opt_inet.h 230TURNSTILE_PROFILING 231UMTX_PROFILING 232UMTX_CHAINS opt_global.h 233VERBOSE_SYSINIT 234ZSTDIO opt_zstdio.h 235 236# Sanitizers 237COVERAGE opt_global.h 238KASAN opt_global.h 239KCOV 240KCSAN opt_global.h 241KMSAN opt_global.h 242KUBSAN opt_global.h 243 244# POSIX kernel options 245P1003_1B_MQUEUE opt_posix.h 246P1003_1B_SEMAPHORES opt_posix.h 247_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 248 249# Do we want the config file compiled into the kernel? 250INCLUDE_CONFIG_FILE opt_config.h 251 252# Options for static filesystems. These should only be used at config 253# time, since the corresponding lkms cannot work if there are any static 254# dependencies. Unusability is enforced by hiding the defines for the 255# options in a never-included header. 256AUTOFS opt_dontuse.h 257CD9660 opt_dontuse.h 258EXT2FS opt_dontuse.h 259FDESCFS opt_dontuse.h 260FFS opt_dontuse.h 261FUSEFS opt_dontuse.h 262MSDOSFS opt_dontuse.h 263NULLFS opt_dontuse.h 264PROCFS opt_dontuse.h 265PSEUDOFS opt_dontuse.h 266SMBFS opt_dontuse.h 267TMPFS opt_dontuse.h 268UDF opt_dontuse.h 269UNIONFS opt_dontuse.h 270ZFS opt_dontuse.h 271 272# Pseudofs debugging 273PSEUDOFS_TRACE opt_pseudofs.h 274 275# In-kernel GSS-API 276KGSSAPI opt_kgssapi.h 277KGSSAPI_DEBUG opt_kgssapi.h 278 279# These static filesystems have one slightly bogus static dependency in 280# sys/i386/i386/autoconf.c. If any of these filesystems are 281# statically compiled into the kernel, code for mounting them as root 282# filesystems will be enabled - but look below. 283# NFSCL - client 284# NFSD - server 285NFSCL opt_nfs.h 286NFSD opt_nfs.h 287 288# filesystems and libiconv bridge 289CD9660_ICONV opt_dontuse.h 290MSDOSFS_ICONV opt_dontuse.h 291UDF_ICONV opt_dontuse.h 292 293# If you are following the conditions in the copyright, 294# you can enable soft-updates which will speed up a lot of thigs 295# and make the system safer from crashes at the same time. 296# otherwise a STUB module will be compiled in. 297SOFTUPDATES opt_ffs.h 298 299# On small, embedded systems, it can be useful to turn off support for 300# snapshots. It saves about 30-40k for a feature that would be lightly 301# used, if it is used at all. 302NO_FFS_SNAPSHOT opt_ffs.h 303 304# Enabling this option turns on support for Access Control Lists in UFS, 305# which can be used to support high security configurations. Depends on 306# UFS_EXTATTR. 307UFS_ACL opt_ufs.h 308 309# Enabling this option turns on support for extended attributes in UFS-based 310# filesystems, which can be used to support high security configurations 311# as well as new filesystem features. 312UFS_EXTATTR opt_ufs.h 313UFS_EXTATTR_AUTOSTART opt_ufs.h 314 315# Enable fast hash lookups for large directories on UFS-based filesystems. 316UFS_DIRHASH opt_ufs.h 317 318# Enable gjournal-based UFS journal. 319UFS_GJOURNAL opt_ufs.h 320 321# The below sentence is not in English, and neither is this one. 322# We plan to remove the static dependences above, with a 323# <filesystem>_ROOT option to control if it usable as root. This list 324# allows these options to be present in config files already (though 325# they won't make any difference yet). 326NFS_ROOT opt_nfsroot.h 327 328# SMB/CIFS requester 329NETSMB opt_netsmb.h 330 331# Enable debugnet(4) networking support. 332DEBUGNET opt_global.h 333# Enable netdump(4) client support. 334NETDUMP opt_global.h 335# Enable netgdb(4) support. 336NETGDB opt_global.h 337 338# Options used only in subr_param.c. 339HZ opt_param.h 340MAXFILES opt_param.h 341NBUF opt_param.h 342NSFBUFS opt_param.h 343VM_BCACHE_SIZE_MAX opt_param.h 344VM_SWZONE_SIZE_MAX opt_param.h 345MAXUSERS 346DFLDSIZ opt_param.h 347MAXDSIZ opt_param.h 348MAXSSIZ opt_param.h 349 350# Generic SCSI options. 351CAM_MAX_HIGHPOWER opt_cam.h 352CAMDEBUG opt_cam.h 353CAM_DEBUG_COMPILE opt_cam.h 354CAM_DEBUG_DELAY opt_cam.h 355CAM_DEBUG_BUS opt_cam.h 356CAM_DEBUG_TARGET opt_cam.h 357CAM_DEBUG_LUN opt_cam.h 358CAM_DEBUG_FLAGS opt_cam.h 359CAM_BOOT_DELAY opt_cam.h 360CAM_IOSCHED_DYNAMIC opt_cam.h 361CAM_IO_STATS opt_cam.h 362CAM_TEST_FAILURE opt_cam.h 363SCSI_DELAY opt_scsi.h 364SCSI_NO_SENSE_STRINGS opt_scsi.h 365SCSI_NO_OP_STRINGS opt_scsi.h 366 367# Options used only in cam/ata/ata_da.c 368ATA_STATIC_ID opt_ada.h 369 370# Options used only in cam/scsi/scsi_cd.c 371CHANGER_MIN_BUSY_SECONDS opt_cd.h 372CHANGER_MAX_BUSY_SECONDS opt_cd.h 373 374# Options used only in cam/scsi/scsi_da.c 375DA_TRACK_REFS opt_da.h 376 377# Options used only in cam/scsi/scsi_sa.c. 378SA_IO_TIMEOUT opt_sa.h 379SA_SPACE_TIMEOUT opt_sa.h 380SA_REWIND_TIMEOUT opt_sa.h 381SA_ERASE_TIMEOUT opt_sa.h 382SA_1FM_AT_EOD opt_sa.h 383 384# Options used only in cam/scsi/scsi_pt.c 385SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 386 387# Options used only in cam/scsi/scsi_ses.c 388SES_ENABLE_PASSTHROUGH opt_ses.h 389 390# Options used in dev/sym/ (Symbios SCSI driver). 391SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 392 # disabled:0 (default), enabled:1 393SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 394 # disabled:0, enabled:1 (default) 395SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 396 # default:8, range:[1..64] 397 398# Options used only in dev/isp/* 399ISP_TARGET_MODE opt_isp.h 400ISP_FW_CRASH_DUMP opt_isp.h 401ISP_DEFAULT_ROLES opt_isp.h 402ISP_INTERNAL_TARGET opt_isp.h 403ISP_FCTAPE_OFF opt_isp.h 404 405# Options used only in dev/iscsi 406ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 407 408# Net stuff. 409ACCEPT_FILTER_DATA 410ACCEPT_FILTER_DNS 411ACCEPT_FILTER_HTTP 412ALTQ opt_global.h 413ALTQ_CBQ opt_altq.h 414ALTQ_CDNR opt_altq.h 415ALTQ_CODEL opt_altq.h 416ALTQ_DEBUG opt_altq.h 417ALTQ_HFSC opt_altq.h 418ALTQ_FAIRQ opt_altq.h 419ALTQ_NOPCC opt_altq.h 420ALTQ_PRIQ opt_altq.h 421ALTQ_RED opt_altq.h 422ALTQ_RIO opt_altq.h 423BOOTP opt_bootp.h 424BOOTP_BLOCKSIZE opt_bootp.h 425BOOTP_COMPAT opt_bootp.h 426BOOTP_NFSROOT opt_bootp.h 427BOOTP_NFSV3 opt_bootp.h 428BOOTP_WIRED_TO opt_bootp.h 429DEVICE_POLLING 430DUMMYNET opt_ipdn.h 431RATELIMIT opt_ratelimit.h 432RATELIMIT_DEBUG opt_ratelimit.h 433INET opt_inet.h 434INET6 opt_inet6.h 435STATS opt_global.h 436IPDIVERT 437IPFILTER opt_ipfilter.h 438IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 439IPFILTER_LOG opt_ipfilter.h 440IPFILTER_LOOKUP opt_ipfilter.h 441IPFIREWALL opt_ipfw.h 442IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 443IPFIREWALL_NAT opt_ipfw.h 444IPFIREWALL_NAT64 opt_ipfw.h 445IPFIREWALL_NPTV6 opt_ipfw.h 446IPFIREWALL_VERBOSE opt_ipfw.h 447IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 448IPFIREWALL_PMOD opt_ipfw.h 449IPSEC opt_ipsec.h 450IPSEC_DEBUG opt_ipsec.h 451IPSEC_SUPPORT opt_ipsec.h 452IPSTEALTH 453KERN_TLS 454KRPC 455LIBALIAS 456LIBMCHAIN 457MBUF_PROFILING 458MBUF_STRESS_TEST 459MROUTING opt_mrouting.h 460NFSLOCKD 461PCBGROUP opt_pcbgroup.h 462PF_DEFAULT_TO_DROP opt_pf.h 463ROUTE_MPATH opt_route.h 464ROUTETABLES opt_route.h 465FIB_ALGO opt_route.h 466RSS opt_rss.h 467SLIP_IFF_OPTS opt_slip.h 468TCPDEBUG 469TCPPCAP opt_global.h 470SIFTR 471TCP_BLACKBOX opt_global.h 472TCP_HHOOK opt_inet.h 473TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 474TCP_RFC7413 opt_inet.h 475TCP_RFC7413_MAX_KEYS opt_inet.h 476TCP_RFC7413_MAX_PSKS opt_inet.h 477TCP_SIGNATURE opt_ipsec.h 478VLAN_ARRAY opt_vlan.h 479XDR 480XBONEHACK 481 482# 483# SCTP 484# 485SCTP opt_sctp.h 486SCTP_SUPPORT opt_sctp.h 487SCTP_DEBUG opt_sctp.h # Enable debug printfs 488SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 489SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 490SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 491SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 492SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 493SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 494SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 495SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 496SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl 497SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats 498# 499# 500# 501 502# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 503# Each netgraph node type can be either be compiled into the kernel 504# or loaded dynamically. To get the former, include the corresponding 505# option below. Each type has its own man page, e.g. ng_async(4). 506NETGRAPH 507NETGRAPH_DEBUG opt_netgraph.h 508NETGRAPH_ASYNC opt_netgraph.h 509NETGRAPH_ATMLLC opt_netgraph.h 510NETGRAPH_ATM_ATMPIF opt_netgraph.h 511NETGRAPH_BLUETOOTH opt_netgraph.h 512NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 513NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 514NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 515NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 516NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 517NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 518NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 519NETGRAPH_BPF opt_netgraph.h 520NETGRAPH_BRIDGE opt_netgraph.h 521NETGRAPH_CAR opt_netgraph.h 522NETGRAPH_CHECKSUM opt_netgraph.h 523NETGRAPH_CISCO opt_netgraph.h 524NETGRAPH_DEFLATE opt_netgraph.h 525NETGRAPH_DEVICE opt_netgraph.h 526NETGRAPH_ECHO opt_netgraph.h 527NETGRAPH_EIFACE opt_netgraph.h 528NETGRAPH_ETHER opt_netgraph.h 529NETGRAPH_ETHER_ECHO opt_netgraph.h 530NETGRAPH_FEC opt_netgraph.h 531NETGRAPH_FRAME_RELAY opt_netgraph.h 532NETGRAPH_GIF opt_netgraph.h 533NETGRAPH_GIF_DEMUX opt_netgraph.h 534NETGRAPH_HOLE opt_netgraph.h 535NETGRAPH_IFACE opt_netgraph.h 536NETGRAPH_IP_INPUT opt_netgraph.h 537NETGRAPH_IPFW opt_netgraph.h 538NETGRAPH_KSOCKET opt_netgraph.h 539NETGRAPH_L2TP opt_netgraph.h 540NETGRAPH_LMI opt_netgraph.h 541NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 542NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 543NETGRAPH_NAT opt_netgraph.h 544NETGRAPH_NETFLOW opt_netgraph.h 545NETGRAPH_ONE2MANY opt_netgraph.h 546NETGRAPH_PATCH opt_netgraph.h 547NETGRAPH_PIPE opt_netgraph.h 548NETGRAPH_PPP opt_netgraph.h 549NETGRAPH_PPPOE opt_netgraph.h 550NETGRAPH_PPTPGRE opt_netgraph.h 551NETGRAPH_PRED1 opt_netgraph.h 552NETGRAPH_RFC1490 opt_netgraph.h 553NETGRAPH_SOCKET opt_netgraph.h 554NETGRAPH_SPLIT opt_netgraph.h 555NETGRAPH_SPPP opt_netgraph.h 556NETGRAPH_TAG opt_netgraph.h 557NETGRAPH_TCPMSS opt_netgraph.h 558NETGRAPH_TEE opt_netgraph.h 559NETGRAPH_TTY opt_netgraph.h 560NETGRAPH_UI opt_netgraph.h 561NETGRAPH_VJC opt_netgraph.h 562NETGRAPH_VLAN opt_netgraph.h 563 564# NgATM options 565NGATM_ATM opt_netgraph.h 566NGATM_ATMBASE opt_netgraph.h 567NGATM_SSCOP opt_netgraph.h 568NGATM_SSCFU opt_netgraph.h 569NGATM_UNI opt_netgraph.h 570NGATM_CCATM opt_netgraph.h 571 572# DRM options 573DRM_DEBUG opt_drm.h 574 575TI_SF_BUF_JUMBO opt_ti.h 576TI_JUMBO_HDRSPLIT opt_ti.h 577 578# Misc debug flags. Most of these should probably be replaced with 579# 'DEBUG', and then let people recompile just the interesting modules 580# with 'make CC="cc -DDEBUG"'. 581DEBUG_1284 opt_ppb_1284.h 582LPT_DEBUG opt_lpt.h 583PLIP_DEBUG opt_plip.h 584LOCKF_DEBUG opt_debug_lockf.h 585SI_DEBUG opt_debug_si.h 586IFMEDIA_DEBUG opt_ifmedia.h 587 588# Fb options 589FB_DEBUG opt_fb.h 590FB_INSTALL_CDEV opt_fb.h 591 592# ppbus related options 593PERIPH_1284 opt_ppb_1284.h 594DONTPROBE_1284 opt_ppb_1284.h 595 596# smbus related options 597ENABLE_ALART opt_intpm.h 598 599# These cause changes all over the kernel 600BLKDEV_IOSIZE opt_global.h 601BURN_BRIDGES opt_global.h 602DEBUG opt_global.h 603DEBUG_LOCKS opt_global.h 604DEBUG_VFS_LOCKS opt_global.h 605DFLTPHYS opt_global.h 606DIAGNOSTIC opt_global.h 607INVARIANT_SUPPORT opt_global.h 608INVARIANTS opt_global.h 609KASSERT_PANIC_OPTIONAL opt_global.h 610MAXCPU opt_global.h 611MAXMEMDOM opt_global.h 612MAXPHYS opt_maxphys.h 613MCLSHIFT opt_global.h 614MUTEX_NOINLINE opt_global.h 615LOCK_PROFILING opt_global.h 616LOCK_PROFILING_FAST opt_global.h 617MSIZE opt_global.h 618REGRESSION opt_global.h 619RWLOCK_NOINLINE opt_global.h 620SX_NOINLINE opt_global.h 621VFS_BIO_DEBUG opt_global.h 622 623# These are VM related options 624VM_KMEM_SIZE opt_vm.h 625VM_KMEM_SIZE_SCALE opt_vm.h 626VM_KMEM_SIZE_MAX opt_vm.h 627VM_NRESERVLEVEL opt_vm.h 628VM_LEVEL_0_ORDER opt_vm.h 629NO_SWAPPING opt_vm.h 630MALLOC_MAKE_FAILURES opt_vm.h 631MALLOC_PROFILE opt_vm.h 632MALLOC_DEBUG_MAXZONES opt_vm.h 633 634# The MemGuard replacement allocator used for tamper-after-free detection 635DEBUG_MEMGUARD opt_vm.h 636 637# The RedZone malloc(9) protection 638DEBUG_REDZONE opt_vm.h 639 640# Standard SMP options 641EARLY_AP_STARTUP opt_global.h 642SMP opt_global.h 643NUMA opt_global.h 644 645# Size of the kernel message buffer 646MSGBUF_SIZE opt_msgbuf.h 647 648# NFS options 649NFS_MINATTRTIMO opt_nfs.h 650NFS_MAXATTRTIMO opt_nfs.h 651NFS_MINDIRATTRTIMO opt_nfs.h 652NFS_MAXDIRATTRTIMO opt_nfs.h 653NFS_DEBUG opt_nfs.h 654 655# TMPFS options 656TMPFS_PAGES_MINRESERVED opt_tmpfs.h 657 658# Options for uart(4) 659UART_PPS_ON_CTS opt_uart.h 660UART_POLL_FREQ opt_uart.h 661UART_DEV_TOLERANCE_PCT opt_uart.h 662 663# options for bus/device framework 664BUS_DEBUG opt_bus.h 665 666# options for USB support 667USB_DEBUG opt_usb.h 668USB_HOST_ALIGN opt_usb.h 669USB_REQ_DEBUG opt_usb.h 670USB_TEMPLATE opt_usb.h 671USB_VERBOSE opt_usb.h 672USB_DMA_SINGLE_ALLOC opt_usb.h 673USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 674U3G_DEBUG opt_u3g.h 675UKBD_DFLT_KEYMAP opt_ukbd.h 676UPLCOM_INTR_INTERVAL opt_uplcom.h 677UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 678UVSCOM_INTR_INTERVAL opt_uvscom.h 679 680# options for the Realtek rtwn driver 681RTWN_DEBUG opt_rtwn.h 682RTWN_WITHOUT_UCODE opt_rtwn.h 683 684# Embedded system options 685INIT_PATH 686 687ROOTDEVNAME 688 689FDC_DEBUG opt_fdc.h 690PCFCLOCK_VERBOSE opt_pcfclock.h 691PCFCLOCK_MAX_RETRIES opt_pcfclock.h 692 693KTR opt_global.h 694KTR_ALQ opt_ktr.h 695KTR_MASK opt_ktr.h 696KTR_CPUMASK opt_ktr.h 697KTR_COMPILE opt_global.h 698KTR_BOOT_ENTRIES opt_global.h 699KTR_ENTRIES opt_global.h 700KTR_VERBOSE opt_ktr.h 701WITNESS opt_global.h 702WITNESS_KDB opt_witness.h 703WITNESS_NO_VNODE opt_witness.h 704WITNESS_SKIPSPIN opt_witness.h 705WITNESS_COUNT opt_witness.h 706OPENSOLARIS_WITNESS opt_global.h 707 708EPOCH_TRACE opt_global.h 709 710# options for ACPI support 711ACPI_DEBUG opt_acpi.h 712ACPI_MAX_TASKS opt_acpi.h 713ACPI_MAX_THREADS opt_acpi.h 714DEV_ACPI opt_acpi.h 715ACPI_EARLY_EPYC_WAR opt_acpi.h 716 717# options for IOMMU support 718IOMMU opt_iommu.h 719 720# ISA support 721DEV_ISA opt_isa.h 722ISAPNP opt_isa.h 723 724# various 'device presence' options. 725DEV_BPF opt_bpf.h 726DEV_CARP opt_carp.h 727DEV_NETMAP opt_global.h 728DEV_PCI opt_pci.h 729DEV_PF opt_pf.h 730DEV_PFLOG opt_pf.h 731DEV_PFSYNC opt_pf.h 732DEV_SPLASH opt_splash.h 733DEV_VLAN opt_vlan.h 734 735# ed driver 736ED_HPP opt_ed.h 737ED_3C503 opt_ed.h 738ED_SIC opt_ed.h 739 740# bce driver 741BCE_DEBUG opt_bce.h 742BCE_NVRAM_WRITE_SUPPORT opt_bce.h 743 744SOCKBUF_DEBUG opt_global.h 745 746 747# options for hifn driver 748HIFN_DEBUG opt_hifn.h 749HIFN_RNDTEST opt_hifn.h 750 751# options for safenet driver 752SAFE_DEBUG opt_safe.h 753SAFE_NO_RNG opt_safe.h 754SAFE_RNDTEST opt_safe.h 755 756# syscons/vt options 757MAXCONS opt_syscons.h 758SC_ALT_MOUSE_IMAGE opt_syscons.h 759SC_CUT_SPACES2TABS opt_syscons.h 760SC_CUT_SEPCHARS opt_syscons.h 761SC_DEBUG_LEVEL opt_syscons.h 762SC_DFLT_FONT opt_syscons.h 763SC_DFLT_TERM opt_syscons.h 764SC_DISABLE_KDBKEY opt_syscons.h 765SC_DISABLE_REBOOT opt_syscons.h 766SC_HISTORY_SIZE opt_syscons.h 767SC_KERNEL_CONS_ATTR opt_syscons.h 768SC_KERNEL_CONS_ATTRS opt_syscons.h 769SC_KERNEL_CONS_REV_ATTR opt_syscons.h 770SC_MOUSE_CHAR opt_syscons.h 771SC_NO_CUTPASTE opt_syscons.h 772SC_NO_FONT_LOADING opt_syscons.h 773SC_NO_HISTORY opt_syscons.h 774SC_NO_MODE_CHANGE opt_syscons.h 775SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 776SC_NO_SYSMOUSE opt_syscons.h 777SC_NO_TERM_DUMB opt_syscons.h 778SC_NO_TERM_SC opt_syscons.h 779SC_NO_TERM_TEKEN opt_syscons.h 780SC_NORM_ATTR opt_syscons.h 781SC_NORM_REV_ATTR opt_syscons.h 782SC_PIXEL_MODE opt_syscons.h 783SC_RENDER_DEBUG opt_syscons.h 784SC_TWOBUTTON_MOUSE opt_syscons.h 785VT_ALT_TO_ESC_HACK opt_syscons.h 786VT_FB_MAX_WIDTH opt_syscons.h 787VT_FB_MAX_HEIGHT opt_syscons.h 788VT_MAXWINDOWS opt_syscons.h 789VT_TWOBUTTON_MOUSE opt_syscons.h 790DEV_SC opt_syscons.h 791DEV_VT opt_syscons.h 792 793# teken terminal emulator options 794TEKEN_CONS25 opt_teken.h 795TEKEN_UTF8 opt_teken.h 796TERMINAL_KERN_ATTR opt_teken.h 797TERMINAL_NORM_ATTR opt_teken.h 798 799# options for printf 800PRINTF_BUFR_SIZE opt_printf.h 801BOOT_TAG opt_printf.h 802BOOT_TAG_SZ opt_printf.h 803 804# kbd options 805KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 806KBD_INSTALL_CDEV opt_kbd.h 807KBD_MAXRETRY opt_kbd.h 808KBD_MAXWAIT opt_kbd.h 809KBD_RESETDELAY opt_kbd.h 810KBDIO_DEBUG opt_kbd.h 811 812KBDMUX_DFLT_KEYMAP opt_kbdmux.h 813 814# options for the Atheros driver 815ATH_DEBUG opt_ath.h 816ATH_TXBUF opt_ath.h 817ATH_RXBUF opt_ath.h 818ATH_DIAGAPI opt_ath.h 819ATH_TX99_DIAG opt_ath.h 820ATH_ENABLE_11N opt_ath.h 821ATH_ENABLE_DFS opt_ath.h 822ATH_EEPROM_FIRMWARE opt_ath.h 823ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 824ATH_DEBUG_ALQ opt_ath.h 825ATH_KTR_INTR_DEBUG opt_ath.h 826 827# options for the Atheros hal 828# XXX For now, this breaks non-AR9130 chipsets, so only use it 829# XXX when actually targeting AR9130. 830AH_SUPPORT_AR9130 opt_ah.h 831 832# This is required for AR933x SoC support 833AH_SUPPORT_AR9330 opt_ah.h 834AH_SUPPORT_AR9340 opt_ah.h 835AH_SUPPORT_QCA9530 opt_ah.h 836AH_SUPPORT_QCA9550 opt_ah.h 837 838AH_DEBUG opt_ah.h 839AH_ASSERT opt_ah.h 840AH_DEBUG_ALQ opt_ah.h 841AH_REGOPS_FUNC opt_ah.h 842AH_WRITE_REGDOMAIN opt_ah.h 843AH_DEBUG_COUNTRY opt_ah.h 844AH_WRITE_EEPROM opt_ah.h 845AH_PRIVATE_DIAG opt_ah.h 846AH_NEED_DESC_SWAP opt_ah.h 847AH_USE_INIPDGAIN opt_ah.h 848AH_MAXCHAN opt_ah.h 849AH_RXCFG_SDMAMW_4BYTES opt_ah.h 850AH_INTERRUPT_DEBUGGING opt_ah.h 851# AR5416 and later interrupt mitigation 852# XXX do not use this for AR9130 853AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 854 855# options for the Altera mSGDMA driver (altera_msgdma) 856ALTERA_MSGDMA_DESC_STD opt_altera_msgdma.h 857ALTERA_MSGDMA_DESC_EXT opt_altera_msgdma.h 858ALTERA_MSGDMA_DESC_PF_STD opt_altera_msgdma.h 859ALTERA_MSGDMA_DESC_PF_EXT opt_altera_msgdma.h 860 861# options for the Broadcom BCM43xx driver (bwi) 862BWI_DEBUG opt_bwi.h 863BWI_DEBUG_VERBOSE opt_bwi.h 864 865# options for the Brodacom BCM43xx driver (bwn) 866BWN_DEBUG opt_bwn.h 867BWN_GPL_PHY opt_bwn.h 868BWN_USE_SIBA opt_bwn.h 869 870# Options for the SIBA driver 871SIBA_DEBUG opt_siba.h 872 873# options for the Marvell 8335 wireless driver 874MALO_DEBUG opt_malo.h 875MALO_TXBUF opt_malo.h 876MALO_RXBUF opt_malo.h 877 878# options for the Marvell wireless driver 879MWL_DEBUG opt_mwl.h 880MWL_TXBUF opt_mwl.h 881MWL_RXBUF opt_mwl.h 882MWL_DIAGAPI opt_mwl.h 883MWL_AGGR_SIZE opt_mwl.h 884MWL_TX_NODROP opt_mwl.h 885 886# Options for the Marvell NETA driver 887MVNETA_MULTIQUEUE opt_mvneta.h 888MVNETA_KTR opt_mvneta.h 889 890# Options for the Intel 802.11ac wireless driver 891IWM_DEBUG opt_iwm.h 892 893# Options for the Intel 802.11n wireless driver 894IWN_DEBUG opt_iwn.h 895 896# Options for the Intel 3945ABG wireless driver 897WPI_DEBUG opt_wpi.h 898 899# dcons options 900DCONS_BUF_SIZE opt_dcons.h 901DCONS_POLL_HZ opt_dcons.h 902DCONS_FORCE_CONSOLE opt_dcons.h 903DCONS_FORCE_GDB opt_dcons.h 904 905# HWPMC options 906HWPMC_DEBUG opt_global.h 907HWPMC_HOOKS 908HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 909 910# 802.11 support layer 911IEEE80211_DEBUG opt_wlan.h 912IEEE80211_DEBUG_REFCNT opt_wlan.h 913IEEE80211_SUPPORT_MESH opt_wlan.h 914IEEE80211_SUPPORT_SUPERG opt_wlan.h 915IEEE80211_SUPPORT_TDMA opt_wlan.h 916IEEE80211_ALQ opt_wlan.h 917IEEE80211_DFS_DEBUG opt_wlan.h 918 919# 802.11 TDMA support 920TDMA_SLOTLEN_DEFAULT opt_tdma.h 921TDMA_SLOTCNT_DEFAULT opt_tdma.h 922TDMA_BINTVAL_DEFAULT opt_tdma.h 923TDMA_TXRATE_11B_DEFAULT opt_tdma.h 924TDMA_TXRATE_11G_DEFAULT opt_tdma.h 925TDMA_TXRATE_11A_DEFAULT opt_tdma.h 926TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 927TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 928TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 929TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 930TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 931 932# VideoMode 933PICKMODE_DEBUG opt_videomode.h 934 935# Network stack virtualization options 936VIMAGE opt_global.h 937VNET_DEBUG opt_global.h 938 939# Common Flash Interface (CFI) options 940CFI_SUPPORT_STRATAFLASH opt_cfi.h 941CFI_ARMEDANDDANGEROUS opt_cfi.h 942CFI_HARDWAREBYTESWAP opt_cfi.h 943 944# Sound options 945SND_DEBUG opt_snd.h 946SND_DIAGNOSTIC opt_snd.h 947SND_FEEDER_MULTIFORMAT opt_snd.h 948SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 949SND_FEEDER_RATE_HP opt_snd.h 950SND_PCM_64 opt_snd.h 951SND_OLDSTEREO opt_snd.h 952 953X86BIOS 954 955# Flattened device tree options 956FDT opt_platform.h 957FDT_DTB_STATIC opt_platform.h 958 959# OFED Infiniband stack 960OFED opt_ofed.h 961OFED_DEBUG_INIT opt_ofed.h 962SDP opt_ofed.h 963SDP_DEBUG opt_ofed.h 964IPOIB opt_ofed.h 965IPOIB_DEBUG opt_ofed.h 966IPOIB_CM opt_ofed.h 967 968# Resource Accounting 969RACCT opt_global.h 970RACCT_DEFAULT_TO_DISABLED opt_global.h 971 972# Resource Limits 973RCTL opt_global.h 974 975# Random number generator(s) 976# Alternative RNG algorithm. 977RANDOM_FENESTRASX opt_global.h 978# With this, no entropy processor is loaded, but the entropy 979# harvesting infrastructure is present. This means an entropy 980# processor may be loaded as a module. 981RANDOM_LOADABLE opt_global.h 982# This turns on high-rate and potentially expensive harvesting in 983# the uma slab allocator. 984RANDOM_ENABLE_UMA opt_global.h 985RANDOM_ENABLE_ETHER opt_global.h 986 987# This options turns TPM into entropy source. 988TPM_HARVEST opt_tpm.h 989 990# BHND(4) driver 991BHND_LOGLEVEL opt_global.h 992 993# GPIO and child devices 994GPIO_SPI_DEBUG opt_gpio.h 995 996# SPI devices 997SPIGEN_LEGACY_CDEVNAME opt_spi.h 998 999# etherswitch(4) driver 1000RTL8366_SOFT_RESET opt_etherswitch.h 1001 1002# evdev protocol support 1003EVDEV_SUPPORT opt_evdev.h 1004EVDEV_DEBUG opt_evdev.h 1005UINPUT_DEBUG opt_evdev.h 1006 1007# Hyper-V network driver 1008HN_DEBUG opt_hn.h 1009 1010# CAM-based MMC stack 1011MMCCAM 1012# Encrypted kernel crash dumps 1013EKCD opt_ekcd.h 1014 1015# NVME options 1016NVME_USE_NVD opt_nvme.h 1017NVME_2X_RESET opt_nvme.h 1018 1019# amdsbwd options 1020AMDSBWD_DEBUG opt_amdsbwd.h 1021 1022# gcov support 1023GCOV opt_global.h 1024LINDEBUGFS 1025 1026# options for HID support 1027HID_DEBUG opt_hid.h 1028IICHID_DEBUG opt_hid.h 1029IICHID_SAMPLING opt_hid.h 1030HKBD_DFLT_KEYMAP opt_hkbd.h 1031HIDRAW_MAKE_UHID_ALIAS opt_hid.h 1032 1033# kenv options 1034# The early kernel environment (loader environment, config(8)-provided static) 1035# is typically cleared after the dynamic environment comes up to ensure that 1036# we're not inadvertently holding on to 'secret' values in these stale envs. 1037# This option is insecure except in controlled environments where the static 1038# environment's contents are known to be safe. 1039PRESERVE_EARLY_KENV opt_global.h 1040