1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45 46TWA_DEBUG opt_twa.h 47 48# Debugging options. 49ALT_BREAK_TO_DEBUGGER opt_kdb.h 50BREAK_TO_DEBUGGER opt_kdb.h 51BUF_TRACKING opt_global.h 52DDB 53DDB_BUFR_SIZE opt_ddb.h 54DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 55DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 56DDB_CTF opt_ddb.h 57DDB_NUMSYM opt_ddb.h 58FULL_BUF_TRACKING opt_global.h 59GDB 60KDB opt_global.h 61KDB_TRACE opt_kdb.h 62KDB_UNATTENDED opt_kdb.h 63KLD_DEBUG opt_kld.h 64SYSCTL_DEBUG opt_sysctl.h 65EARLY_PRINTF opt_global.h 66TEXTDUMP_PREFERRED opt_ddb.h 67TEXTDUMP_VERBOSE opt_ddb.h 68NUM_CORE_FILES opt_global.h 69TSLOG opt_global.h 70TSLOGSIZE opt_global.h 71 72# Miscellaneous options. 73ALQ 74ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 75ATSE_CFI_HACK opt_cfi.h 76AUDIT opt_global.h 77BOOTHOWTO opt_global.h 78BOOTVERBOSE opt_global.h 79CALLOUT_PROFILING 80CAPABILITIES opt_capsicum.h 81CAPABILITY_MODE opt_capsicum.h 82COMPAT_43 opt_global.h 83COMPAT_43TTY opt_global.h 84COMPAT_FREEBSD4 opt_global.h 85COMPAT_FREEBSD5 opt_global.h 86COMPAT_FREEBSD6 opt_global.h 87COMPAT_FREEBSD7 opt_global.h 88COMPAT_FREEBSD9 opt_global.h 89COMPAT_FREEBSD10 opt_global.h 90COMPAT_FREEBSD11 opt_global.h 91COMPAT_FREEBSD12 opt_global.h 92COMPAT_CLOUDABI32 opt_dontuse.h 93COMPAT_CLOUDABI64 opt_dontuse.h 94COMPAT_LINUXKPI opt_dontuse.h 95_COMPAT_LINUX32 opt_compat.h # XXX: make sure opt_compat.h exists 96COMPILING_LINT opt_global.h 97CY_PCI_FASTINTR 98DEADLKRES opt_watchdog.h 99EXPERIMENTAL opt_global.h 100EXT_RESOURCES opt_global.h 101DIRECTIO 102FILEMON opt_dontuse.h 103FFCLOCK 104FULL_PREEMPTION opt_sched.h 105GZIO opt_gzio.h 106IMAGACT_BINMISC opt_dontuse.h 107IPI_PREEMPTION opt_sched.h 108GEOM_BDE opt_geom.h 109GEOM_CACHE opt_geom.h 110GEOM_CONCAT opt_geom.h 111GEOM_ELI opt_geom.h 112GEOM_GATE opt_geom.h 113GEOM_JOURNAL opt_geom.h 114GEOM_LABEL opt_geom.h 115GEOM_LABEL_GPT opt_geom.h 116GEOM_LINUX_LVM opt_geom.h 117GEOM_MAP opt_geom.h 118GEOM_MIRROR opt_geom.h 119GEOM_MOUNTVER opt_geom.h 120GEOM_MULTIPATH opt_geom.h 121GEOM_NOP opt_geom.h 122GEOM_PART_APM opt_geom.h 123GEOM_PART_BSD opt_geom.h 124GEOM_PART_BSD64 opt_geom.h 125GEOM_PART_EBR opt_geom.h 126GEOM_PART_EBR_COMPAT opt_geom.h 127GEOM_PART_GPT opt_geom.h 128GEOM_PART_LDM opt_geom.h 129GEOM_PART_MBR opt_geom.h 130GEOM_PART_VTOC8 opt_geom.h 131GEOM_RAID opt_geom.h 132GEOM_RAID3 opt_geom.h 133GEOM_SHSEC opt_geom.h 134GEOM_STRIPE opt_geom.h 135GEOM_UZIP opt_geom.h 136GEOM_UZIP_DEBUG opt_geom.h 137GEOM_VINUM opt_geom.h 138GEOM_VIRSTOR opt_geom.h 139GEOM_ZERO opt_geom.h 140IFLIB opt_iflib.h 141KDTRACE_HOOKS opt_global.h 142KDTRACE_FRAME opt_kdtrace.h 143KN_HASHSIZE opt_kqueue.h 144KSTACK_MAX_PAGES 145KSTACK_PAGES 146KSTACK_USAGE_PROF 147KTRACE 148KTRACE_REQUEST_POOL opt_ktrace.h 149LIBICONV 150MAC opt_global.h 151MAC_BIBA opt_dontuse.h 152MAC_BSDEXTENDED opt_dontuse.h 153MAC_IFOFF opt_dontuse.h 154MAC_LOMAC opt_dontuse.h 155MAC_MLS opt_dontuse.h 156MAC_NONE opt_dontuse.h 157MAC_NTPD opt_dontuse.h 158MAC_PARTITION opt_dontuse.h 159MAC_PORTACL opt_dontuse.h 160MAC_SEEOTHERUIDS opt_dontuse.h 161MAC_STATIC opt_mac.h 162MAC_STUB opt_dontuse.h 163MAC_TEST opt_dontuse.h 164MAC_VERIEXEC opt_dontuse.h 165MAC_VERIEXEC_SHA1 opt_dontuse.h 166MAC_VERIEXEC_SHA256 opt_dontuse.h 167MAC_VERIEXEC_SHA384 opt_dontuse.h 168MAC_VERIEXEC_SHA512 opt_dontuse.h 169MD_ROOT opt_md.h 170MD_ROOT_FSTYPE opt_md.h 171MD_ROOT_READONLY opt_md.h 172MD_ROOT_SIZE opt_md.h 173MD_ROOT_MEM opt_md.h 174MFI_DEBUG opt_mfi.h 175MFI_DECODE_LOG opt_mfi.h 176MPROF_BUFFERS opt_mprof.h 177MPROF_HASH_SIZE opt_mprof.h 178NEW_PCIB opt_global.h 179NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 180NO_ADAPTIVE_RWLOCKS 181NO_ADAPTIVE_SX 182NO_EVENTTIMERS opt_timer.h 183NO_OBSOLETE_CODE opt_global.h 184NO_SYSCTL_DESCR opt_global.h 185NSWBUF_MIN opt_param.h 186MBUF_PACKET_ZONE_DISABLE opt_global.h 187PANIC_REBOOT_WAIT_TIME opt_panic.h 188PCI_HP opt_pci.h 189PCI_IOV opt_global.h 190PPC_DEBUG opt_ppc.h 191PPC_PROBE_CHIPSET opt_ppc.h 192PPS_SYNC opt_ntp.h 193PREEMPTION opt_sched.h 194QUOTA 195SCHED_4BSD opt_sched.h 196SCHED_STATS opt_sched.h 197SCHED_ULE opt_sched.h 198SLEEPQUEUE_PROFILING 199SLHCI_DEBUG opt_slhci.h 200STACK opt_stack.h 201SUIDDIR 202MSGMNB opt_sysvipc.h 203MSGMNI opt_sysvipc.h 204MSGSEG opt_sysvipc.h 205MSGSSZ opt_sysvipc.h 206MSGTQL opt_sysvipc.h 207SEMMNI opt_sysvipc.h 208SEMMNS opt_sysvipc.h 209SEMMNU opt_sysvipc.h 210SEMMSL opt_sysvipc.h 211SEMOPM opt_sysvipc.h 212SEMUME opt_sysvipc.h 213SHMALL opt_sysvipc.h 214SHMMAX opt_sysvipc.h 215SHMMAXPGS opt_sysvipc.h 216SHMMIN opt_sysvipc.h 217SHMMNI opt_sysvipc.h 218SHMSEG opt_sysvipc.h 219SYSVMSG opt_sysvipc.h 220SYSVSEM opt_sysvipc.h 221SYSVSHM opt_sysvipc.h 222SW_WATCHDOG opt_watchdog.h 223TCPHPTS opt_inet.h 224TURNSTILE_PROFILING 225UMTX_PROFILING 226UMTX_CHAINS opt_global.h 227VERBOSE_SYSINIT 228ZSTDIO opt_zstdio.h 229 230# Sanitizers 231COVERAGE opt_global.h 232KCOV 233KCSAN opt_global.h 234KUBSAN opt_global.h 235 236# POSIX kernel options 237P1003_1B_MQUEUE opt_posix.h 238P1003_1B_SEMAPHORES opt_posix.h 239_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 240 241# Do we want the config file compiled into the kernel? 242INCLUDE_CONFIG_FILE opt_config.h 243 244# Options for static filesystems. These should only be used at config 245# time, since the corresponding lkms cannot work if there are any static 246# dependencies. Unusability is enforced by hiding the defines for the 247# options in a never-included header. 248AUTOFS opt_dontuse.h 249CD9660 opt_dontuse.h 250EXT2FS opt_dontuse.h 251FDESCFS opt_dontuse.h 252FFS opt_dontuse.h 253FUSEFS opt_dontuse.h 254MSDOSFS opt_dontuse.h 255NULLFS opt_dontuse.h 256PROCFS opt_dontuse.h 257PSEUDOFS opt_dontuse.h 258SMBFS opt_dontuse.h 259TMPFS opt_dontuse.h 260UDF opt_dontuse.h 261UNIONFS opt_dontuse.h 262ZFS opt_dontuse.h 263 264# Pseudofs debugging 265PSEUDOFS_TRACE opt_pseudofs.h 266 267# In-kernel GSS-API 268KGSSAPI opt_kgssapi.h 269KGSSAPI_DEBUG opt_kgssapi.h 270 271# These static filesystems have one slightly bogus static dependency in 272# sys/i386/i386/autoconf.c. If any of these filesystems are 273# statically compiled into the kernel, code for mounting them as root 274# filesystems will be enabled - but look below. 275# NFSCL - client 276# NFSD - server 277NFSCL opt_nfs.h 278NFSD opt_nfs.h 279 280# filesystems and libiconv bridge 281CD9660_ICONV opt_dontuse.h 282MSDOSFS_ICONV opt_dontuse.h 283UDF_ICONV opt_dontuse.h 284 285# If you are following the conditions in the copyright, 286# you can enable soft-updates which will speed up a lot of thigs 287# and make the system safer from crashes at the same time. 288# otherwise a STUB module will be compiled in. 289SOFTUPDATES opt_ffs.h 290 291# On small, embedded systems, it can be useful to turn off support for 292# snapshots. It saves about 30-40k for a feature that would be lightly 293# used, if it is used at all. 294NO_FFS_SNAPSHOT opt_ffs.h 295 296# Enabling this option turns on support for Access Control Lists in UFS, 297# which can be used to support high security configurations. Depends on 298# UFS_EXTATTR. 299UFS_ACL opt_ufs.h 300 301# Enabling this option turns on support for extended attributes in UFS-based 302# filesystems, which can be used to support high security configurations 303# as well as new filesystem features. 304UFS_EXTATTR opt_ufs.h 305UFS_EXTATTR_AUTOSTART opt_ufs.h 306 307# Enable fast hash lookups for large directories on UFS-based filesystems. 308UFS_DIRHASH opt_ufs.h 309 310# Enable gjournal-based UFS journal. 311UFS_GJOURNAL opt_ufs.h 312 313# The below sentence is not in English, and neither is this one. 314# We plan to remove the static dependences above, with a 315# <filesystem>_ROOT option to control if it usable as root. This list 316# allows these options to be present in config files already (though 317# they won't make any difference yet). 318NFS_ROOT opt_nfsroot.h 319 320# SMB/CIFS requester 321NETSMB opt_netsmb.h 322 323# Enable debugnet(4) networking support. 324DEBUGNET opt_global.h 325# Enable netdump(4) client support. 326NETDUMP opt_global.h 327# Enable netgdb(4) support. 328NETGDB opt_global.h 329 330# Options used only in subr_param.c. 331HZ opt_param.h 332MAXFILES opt_param.h 333NBUF opt_param.h 334NSFBUFS opt_param.h 335VM_BCACHE_SIZE_MAX opt_param.h 336VM_SWZONE_SIZE_MAX opt_param.h 337MAXUSERS 338DFLDSIZ opt_param.h 339MAXDSIZ opt_param.h 340MAXSSIZ opt_param.h 341 342# Generic SCSI options. 343CAM_MAX_HIGHPOWER opt_cam.h 344CAMDEBUG opt_cam.h 345CAM_DEBUG_COMPILE opt_cam.h 346CAM_DEBUG_DELAY opt_cam.h 347CAM_DEBUG_BUS opt_cam.h 348CAM_DEBUG_TARGET opt_cam.h 349CAM_DEBUG_LUN opt_cam.h 350CAM_DEBUG_FLAGS opt_cam.h 351CAM_BOOT_DELAY opt_cam.h 352CAM_IOSCHED_DYNAMIC opt_cam.h 353CAM_IO_STATS opt_cam.h 354CAM_TEST_FAILURE opt_cam.h 355SCSI_DELAY opt_scsi.h 356SCSI_NO_SENSE_STRINGS opt_scsi.h 357SCSI_NO_OP_STRINGS opt_scsi.h 358 359# Options used only in cam/ata/ata_da.c 360ATA_STATIC_ID opt_ada.h 361 362# Options used only in cam/scsi/scsi_cd.c 363CHANGER_MIN_BUSY_SECONDS opt_cd.h 364CHANGER_MAX_BUSY_SECONDS opt_cd.h 365 366# Options used only in cam/scsi/scsi_da.c 367DA_TRACK_REFS opt_da.h 368 369# Options used only in cam/scsi/scsi_sa.c. 370SA_IO_TIMEOUT opt_sa.h 371SA_SPACE_TIMEOUT opt_sa.h 372SA_REWIND_TIMEOUT opt_sa.h 373SA_ERASE_TIMEOUT opt_sa.h 374SA_1FM_AT_EOD opt_sa.h 375 376# Options used only in cam/scsi/scsi_pt.c 377SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 378 379# Options used only in cam/scsi/scsi_ses.c 380SES_ENABLE_PASSTHROUGH opt_ses.h 381 382# Options used in dev/sym/ (Symbios SCSI driver). 383SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 384 # disabled:0 (default), enabled:1 385SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 386 # disabled:0, enabled:1 (default) 387SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 388 # default:8, range:[1..64] 389 390# Options used only in dev/isp/* 391ISP_TARGET_MODE opt_isp.h 392ISP_FW_CRASH_DUMP opt_isp.h 393ISP_DEFAULT_ROLES opt_isp.h 394ISP_INTERNAL_TARGET opt_isp.h 395ISP_FCTAPE_OFF opt_isp.h 396 397# Options used only in dev/iscsi 398ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 399 400# Net stuff. 401ACCEPT_FILTER_DATA 402ACCEPT_FILTER_DNS 403ACCEPT_FILTER_HTTP 404ALTQ opt_global.h 405ALTQ_CBQ opt_altq.h 406ALTQ_CDNR opt_altq.h 407ALTQ_CODEL opt_altq.h 408ALTQ_DEBUG opt_altq.h 409ALTQ_HFSC opt_altq.h 410ALTQ_FAIRQ opt_altq.h 411ALTQ_NOPCC opt_altq.h 412ALTQ_PRIQ opt_altq.h 413ALTQ_RED opt_altq.h 414ALTQ_RIO opt_altq.h 415BOOTP opt_bootp.h 416BOOTP_BLOCKSIZE opt_bootp.h 417BOOTP_COMPAT opt_bootp.h 418BOOTP_NFSROOT opt_bootp.h 419BOOTP_NFSV3 opt_bootp.h 420BOOTP_WIRED_TO opt_bootp.h 421DEVICE_POLLING 422DUMMYNET opt_ipdn.h 423RATELIMIT opt_ratelimit.h 424RATELIMIT_DEBUG opt_ratelimit.h 425INET opt_inet.h 426INET6 opt_inet6.h 427STATS opt_global.h 428IPDIVERT 429IPFILTER opt_ipfilter.h 430IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 431IPFILTER_LOG opt_ipfilter.h 432IPFILTER_LOOKUP opt_ipfilter.h 433IPFIREWALL opt_ipfw.h 434IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 435IPFIREWALL_NAT opt_ipfw.h 436IPFIREWALL_NAT64 opt_ipfw.h 437IPFIREWALL_NPTV6 opt_ipfw.h 438IPFIREWALL_VERBOSE opt_ipfw.h 439IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 440IPFIREWALL_PMOD opt_ipfw.h 441IPSEC opt_ipsec.h 442IPSEC_DEBUG opt_ipsec.h 443IPSEC_SUPPORT opt_ipsec.h 444IPSTEALTH 445KERN_TLS 446KRPC 447LIBALIAS 448LIBMCHAIN 449MBUF_PROFILING 450MBUF_STRESS_TEST 451MROUTING opt_mrouting.h 452NFSLOCKD 453PCBGROUP opt_pcbgroup.h 454PF_DEFAULT_TO_DROP opt_pf.h 455RADIX_MPATH opt_mpath.h 456ROUTETABLES opt_route.h 457RSS opt_rss.h 458SLIP_IFF_OPTS opt_slip.h 459TCPDEBUG 460TCPPCAP opt_global.h 461SIFTR 462TCP_BLACKBOX opt_global.h 463TCP_HHOOK opt_inet.h 464TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 465TCP_RFC7413 opt_inet.h 466TCP_RFC7413_MAX_KEYS opt_inet.h 467TCP_RFC7413_MAX_PSKS opt_inet.h 468TCP_SIGNATURE opt_ipsec.h 469VLAN_ARRAY opt_vlan.h 470XBONEHACK 471 472# 473# SCTP 474# 475SCTP opt_sctp.h 476SCTP_DEBUG opt_sctp.h # Enable debug printfs 477SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 478SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 479SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 480SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 481SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 482SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 483SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 484SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 485SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl 486SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats 487# 488# 489# 490 491# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 492# Each netgraph node type can be either be compiled into the kernel 493# or loaded dynamically. To get the former, include the corresponding 494# option below. Each type has its own man page, e.g. ng_async(4). 495NETGRAPH 496NETGRAPH_DEBUG opt_netgraph.h 497NETGRAPH_ASYNC opt_netgraph.h 498NETGRAPH_ATMLLC opt_netgraph.h 499NETGRAPH_ATM_ATMPIF opt_netgraph.h 500NETGRAPH_BLUETOOTH opt_netgraph.h 501NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 502NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 503NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 504NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 505NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 506NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 507NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 508NETGRAPH_BPF opt_netgraph.h 509NETGRAPH_BRIDGE opt_netgraph.h 510NETGRAPH_CAR opt_netgraph.h 511NETGRAPH_CHECKSUM opt_netgraph.h 512NETGRAPH_CISCO opt_netgraph.h 513NETGRAPH_DEFLATE opt_netgraph.h 514NETGRAPH_DEVICE opt_netgraph.h 515NETGRAPH_ECHO opt_netgraph.h 516NETGRAPH_EIFACE opt_netgraph.h 517NETGRAPH_ETHER opt_netgraph.h 518NETGRAPH_ETHER_ECHO opt_netgraph.h 519NETGRAPH_FEC opt_netgraph.h 520NETGRAPH_FRAME_RELAY opt_netgraph.h 521NETGRAPH_GIF opt_netgraph.h 522NETGRAPH_GIF_DEMUX opt_netgraph.h 523NETGRAPH_HOLE opt_netgraph.h 524NETGRAPH_IFACE opt_netgraph.h 525NETGRAPH_IP_INPUT opt_netgraph.h 526NETGRAPH_IPFW opt_netgraph.h 527NETGRAPH_KSOCKET opt_netgraph.h 528NETGRAPH_L2TP opt_netgraph.h 529NETGRAPH_LMI opt_netgraph.h 530NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 531NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 532NETGRAPH_NAT opt_netgraph.h 533NETGRAPH_NETFLOW opt_netgraph.h 534NETGRAPH_ONE2MANY opt_netgraph.h 535NETGRAPH_PATCH opt_netgraph.h 536NETGRAPH_PIPE opt_netgraph.h 537NETGRAPH_PPP opt_netgraph.h 538NETGRAPH_PPPOE opt_netgraph.h 539NETGRAPH_PPTPGRE opt_netgraph.h 540NETGRAPH_PRED1 opt_netgraph.h 541NETGRAPH_RFC1490 opt_netgraph.h 542NETGRAPH_SOCKET opt_netgraph.h 543NETGRAPH_SPLIT opt_netgraph.h 544NETGRAPH_SPPP opt_netgraph.h 545NETGRAPH_TAG opt_netgraph.h 546NETGRAPH_TCPMSS opt_netgraph.h 547NETGRAPH_TEE opt_netgraph.h 548NETGRAPH_TTY opt_netgraph.h 549NETGRAPH_UI opt_netgraph.h 550NETGRAPH_VJC opt_netgraph.h 551NETGRAPH_VLAN opt_netgraph.h 552 553# NgATM options 554NGATM_ATM opt_netgraph.h 555NGATM_ATMBASE opt_netgraph.h 556NGATM_SSCOP opt_netgraph.h 557NGATM_SSCFU opt_netgraph.h 558NGATM_UNI opt_netgraph.h 559NGATM_CCATM opt_netgraph.h 560 561# DRM options 562DRM_DEBUG opt_drm.h 563 564TI_SF_BUF_JUMBO opt_ti.h 565TI_JUMBO_HDRSPLIT opt_ti.h 566 567# Misc debug flags. Most of these should probably be replaced with 568# 'DEBUG', and then let people recompile just the interesting modules 569# with 'make CC="cc -DDEBUG"'. 570CLUSTERDEBUG opt_debug_cluster.h 571DEBUG_1284 opt_ppb_1284.h 572LPT_DEBUG opt_lpt.h 573PLIP_DEBUG opt_plip.h 574LOCKF_DEBUG opt_debug_lockf.h 575SI_DEBUG opt_debug_si.h 576IFMEDIA_DEBUG opt_ifmedia.h 577 578# Fb options 579FB_DEBUG opt_fb.h 580FB_INSTALL_CDEV opt_fb.h 581 582# ppbus related options 583PERIPH_1284 opt_ppb_1284.h 584DONTPROBE_1284 opt_ppb_1284.h 585 586# smbus related options 587ENABLE_ALART opt_intpm.h 588 589# These cause changes all over the kernel 590BLKDEV_IOSIZE opt_global.h 591BURN_BRIDGES opt_global.h 592DEBUG opt_global.h 593DEBUG_LOCKS opt_global.h 594DEBUG_VFS_LOCKS opt_global.h 595DFLTPHYS opt_global.h 596DIAGNOSTIC opt_global.h 597INVARIANT_SUPPORT opt_global.h 598INVARIANTS opt_global.h 599KASSERT_PANIC_OPTIONAL opt_global.h 600MAXCPU opt_global.h 601MAXMEMDOM opt_global.h 602MAXPHYS opt_global.h 603MCLSHIFT opt_global.h 604MUTEX_NOINLINE opt_global.h 605LOCK_PROFILING opt_global.h 606LOCK_PROFILING_FAST opt_global.h 607MSIZE opt_global.h 608REGRESSION opt_global.h 609RWLOCK_NOINLINE opt_global.h 610SX_NOINLINE opt_global.h 611VFS_BIO_DEBUG opt_global.h 612 613# These are VM related options 614VM_KMEM_SIZE opt_vm.h 615VM_KMEM_SIZE_SCALE opt_vm.h 616VM_KMEM_SIZE_MAX opt_vm.h 617VM_NRESERVLEVEL opt_vm.h 618VM_LEVEL_0_ORDER opt_vm.h 619NO_SWAPPING opt_vm.h 620MALLOC_MAKE_FAILURES opt_vm.h 621MALLOC_PROFILE opt_vm.h 622MALLOC_DEBUG_MAXZONES opt_vm.h 623 624# The MemGuard replacement allocator used for tamper-after-free detection 625DEBUG_MEMGUARD opt_vm.h 626 627# The RedZone malloc(9) protection 628DEBUG_REDZONE opt_vm.h 629 630# Standard SMP options 631EARLY_AP_STARTUP opt_global.h 632SMP opt_global.h 633NUMA opt_global.h 634 635# Size of the kernel message buffer 636MSGBUF_SIZE opt_msgbuf.h 637 638# NFS options 639NFS_MINATTRTIMO opt_nfs.h 640NFS_MAXATTRTIMO opt_nfs.h 641NFS_MINDIRATTRTIMO opt_nfs.h 642NFS_MAXDIRATTRTIMO opt_nfs.h 643NFS_DEBUG opt_nfs.h 644 645# TMPFS options 646TMPFS_PAGES_MINRESERVED opt_tmpfs.h 647 648# Options for uart(4) 649UART_PPS_ON_CTS opt_uart.h 650UART_POLL_FREQ opt_uart.h 651UART_DEV_TOLERANCE_PCT opt_uart.h 652 653# options for bus/device framework 654BUS_DEBUG opt_bus.h 655 656# options for USB support 657USB_DEBUG opt_usb.h 658USB_HOST_ALIGN opt_usb.h 659USB_REQ_DEBUG opt_usb.h 660USB_TEMPLATE opt_usb.h 661USB_VERBOSE opt_usb.h 662USB_DMA_SINGLE_ALLOC opt_usb.h 663USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 664U3G_DEBUG opt_u3g.h 665UKBD_DFLT_KEYMAP opt_ukbd.h 666UPLCOM_INTR_INTERVAL opt_uplcom.h 667UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 668UVSCOM_INTR_INTERVAL opt_uvscom.h 669 670# options for the Realtek rtwn driver 671RTWN_DEBUG opt_rtwn.h 672RTWN_WITHOUT_UCODE opt_rtwn.h 673 674# Embedded system options 675INIT_PATH 676 677ROOTDEVNAME 678 679FDC_DEBUG opt_fdc.h 680PCFCLOCK_VERBOSE opt_pcfclock.h 681PCFCLOCK_MAX_RETRIES opt_pcfclock.h 682 683KTR opt_global.h 684KTR_ALQ opt_ktr.h 685KTR_MASK opt_ktr.h 686KTR_CPUMASK opt_ktr.h 687KTR_COMPILE opt_global.h 688KTR_BOOT_ENTRIES opt_global.h 689KTR_ENTRIES opt_global.h 690KTR_VERBOSE opt_ktr.h 691WITNESS opt_global.h 692WITNESS_KDB opt_witness.h 693WITNESS_NO_VNODE opt_witness.h 694WITNESS_SKIPSPIN opt_witness.h 695WITNESS_COUNT opt_witness.h 696OPENSOLARIS_WITNESS opt_global.h 697 698EPOCH_TRACE opt_global.h 699 700# options for ACPI support 701ACPI_DEBUG opt_acpi.h 702ACPI_MAX_TASKS opt_acpi.h 703ACPI_MAX_THREADS opt_acpi.h 704ACPI_DMAR opt_acpi.h 705DEV_ACPI opt_acpi.h 706 707# ISA support 708DEV_ISA opt_isa.h 709ISAPNP opt_isa.h 710 711# various 'device presence' options. 712DEV_BPF opt_bpf.h 713DEV_CARP opt_carp.h 714DEV_NETMAP opt_global.h 715DEV_PCI opt_pci.h 716DEV_PF opt_pf.h 717DEV_PFLOG opt_pf.h 718DEV_PFSYNC opt_pf.h 719DEV_SPLASH opt_splash.h 720DEV_VLAN opt_vlan.h 721 722# ed driver 723ED_HPP opt_ed.h 724ED_3C503 opt_ed.h 725ED_SIC opt_ed.h 726 727# bce driver 728BCE_DEBUG opt_bce.h 729BCE_NVRAM_WRITE_SUPPORT opt_bce.h 730 731SOCKBUF_DEBUG opt_global.h 732 733 734# options for ubsec driver 735UBSEC_DEBUG opt_ubsec.h 736UBSEC_RNDTEST opt_ubsec.h 737UBSEC_NO_RNG opt_ubsec.h 738 739# options for hifn driver 740HIFN_DEBUG opt_hifn.h 741HIFN_RNDTEST opt_hifn.h 742 743# options for safenet driver 744SAFE_DEBUG opt_safe.h 745SAFE_NO_RNG opt_safe.h 746SAFE_RNDTEST opt_safe.h 747 748# syscons/vt options 749MAXCONS opt_syscons.h 750SC_ALT_MOUSE_IMAGE opt_syscons.h 751SC_CUT_SPACES2TABS opt_syscons.h 752SC_CUT_SEPCHARS opt_syscons.h 753SC_DEBUG_LEVEL opt_syscons.h 754SC_DFLT_FONT opt_syscons.h 755SC_DFLT_TERM opt_syscons.h 756SC_DISABLE_KDBKEY opt_syscons.h 757SC_DISABLE_REBOOT opt_syscons.h 758SC_HISTORY_SIZE opt_syscons.h 759SC_KERNEL_CONS_ATTR opt_syscons.h 760SC_KERNEL_CONS_ATTRS opt_syscons.h 761SC_KERNEL_CONS_REV_ATTR opt_syscons.h 762SC_MOUSE_CHAR opt_syscons.h 763SC_NO_CUTPASTE opt_syscons.h 764SC_NO_FONT_LOADING opt_syscons.h 765SC_NO_HISTORY opt_syscons.h 766SC_NO_MODE_CHANGE opt_syscons.h 767SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 768SC_NO_SYSMOUSE opt_syscons.h 769SC_NO_TERM_DUMB opt_syscons.h 770SC_NO_TERM_SC opt_syscons.h 771SC_NO_TERM_TEKEN opt_syscons.h 772SC_NORM_ATTR opt_syscons.h 773SC_NORM_REV_ATTR opt_syscons.h 774SC_PIXEL_MODE opt_syscons.h 775SC_RENDER_DEBUG opt_syscons.h 776SC_TWOBUTTON_MOUSE opt_syscons.h 777VT_ALT_TO_ESC_HACK opt_syscons.h 778VT_FB_DEFAULT_WIDTH opt_syscons.h 779VT_FB_DEFAULT_HEIGHT opt_syscons.h 780VT_MAXWINDOWS opt_syscons.h 781VT_TWOBUTTON_MOUSE opt_syscons.h 782DEV_SC opt_syscons.h 783DEV_VT opt_syscons.h 784 785# teken terminal emulator options 786TEKEN_CONS25 opt_teken.h 787TEKEN_UTF8 opt_teken.h 788TERMINAL_KERN_ATTR opt_teken.h 789TERMINAL_NORM_ATTR opt_teken.h 790 791# options for printf 792PRINTF_BUFR_SIZE opt_printf.h 793BOOT_TAG opt_printf.h 794BOOT_TAG_SZ opt_printf.h 795 796# kbd options 797KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 798KBD_INSTALL_CDEV opt_kbd.h 799KBD_MAXRETRY opt_kbd.h 800KBD_MAXWAIT opt_kbd.h 801KBD_RESETDELAY opt_kbd.h 802KBDIO_DEBUG opt_kbd.h 803 804KBDMUX_DFLT_KEYMAP opt_kbdmux.h 805 806# options for the Atheros driver 807ATH_DEBUG opt_ath.h 808ATH_TXBUF opt_ath.h 809ATH_RXBUF opt_ath.h 810ATH_DIAGAPI opt_ath.h 811ATH_TX99_DIAG opt_ath.h 812ATH_ENABLE_11N opt_ath.h 813ATH_ENABLE_DFS opt_ath.h 814ATH_EEPROM_FIRMWARE opt_ath.h 815ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 816ATH_DEBUG_ALQ opt_ath.h 817ATH_KTR_INTR_DEBUG opt_ath.h 818 819# options for the Atheros hal 820# XXX For now, this breaks non-AR9130 chipsets, so only use it 821# XXX when actually targeting AR9130. 822AH_SUPPORT_AR9130 opt_ah.h 823 824# This is required for AR933x SoC support 825AH_SUPPORT_AR9330 opt_ah.h 826AH_SUPPORT_AR9340 opt_ah.h 827AH_SUPPORT_QCA9530 opt_ah.h 828AH_SUPPORT_QCA9550 opt_ah.h 829 830AH_DEBUG opt_ah.h 831AH_ASSERT opt_ah.h 832AH_DEBUG_ALQ opt_ah.h 833AH_REGOPS_FUNC opt_ah.h 834AH_WRITE_REGDOMAIN opt_ah.h 835AH_DEBUG_COUNTRY opt_ah.h 836AH_WRITE_EEPROM opt_ah.h 837AH_PRIVATE_DIAG opt_ah.h 838AH_NEED_DESC_SWAP opt_ah.h 839AH_USE_INIPDGAIN opt_ah.h 840AH_MAXCHAN opt_ah.h 841AH_RXCFG_SDMAMW_4BYTES opt_ah.h 842AH_INTERRUPT_DEBUGGING opt_ah.h 843# AR5416 and later interrupt mitigation 844# XXX do not use this for AR9130 845AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 846 847# options for the Altera mSGDMA driver (altera_msgdma) 848ALTERA_MSGDMA_DESC_STD opt_altera_msgdma.h 849ALTERA_MSGDMA_DESC_EXT opt_altera_msgdma.h 850ALTERA_MSGDMA_DESC_PF_STD opt_altera_msgdma.h 851ALTERA_MSGDMA_DESC_PF_EXT opt_altera_msgdma.h 852 853# options for the Broadcom BCM43xx driver (bwi) 854BWI_DEBUG opt_bwi.h 855BWI_DEBUG_VERBOSE opt_bwi.h 856 857# options for the Brodacom BCM43xx driver (bwn) 858BWN_DEBUG opt_bwn.h 859BWN_GPL_PHY opt_bwn.h 860BWN_USE_SIBA opt_bwn.h 861 862# Options for the SIBA driver 863SIBA_DEBUG opt_siba.h 864 865# options for the Marvell 8335 wireless driver 866MALO_DEBUG opt_malo.h 867MALO_TXBUF opt_malo.h 868MALO_RXBUF opt_malo.h 869 870# options for the Marvell wireless driver 871MWL_DEBUG opt_mwl.h 872MWL_TXBUF opt_mwl.h 873MWL_RXBUF opt_mwl.h 874MWL_DIAGAPI opt_mwl.h 875MWL_AGGR_SIZE opt_mwl.h 876MWL_TX_NODROP opt_mwl.h 877 878# Options for the Marvell NETA driver 879MVNETA_MULTIQUEUE opt_mvneta.h 880MVNETA_KTR opt_mvneta.h 881 882# Options for the Intel 802.11ac wireless driver 883IWM_DEBUG opt_iwm.h 884 885# Options for the Intel 802.11n wireless driver 886IWN_DEBUG opt_iwn.h 887 888# Options for the Intel 3945ABG wireless driver 889WPI_DEBUG opt_wpi.h 890 891# dcons options 892DCONS_BUF_SIZE opt_dcons.h 893DCONS_POLL_HZ opt_dcons.h 894DCONS_FORCE_CONSOLE opt_dcons.h 895DCONS_FORCE_GDB opt_dcons.h 896 897# HWPMC options 898HWPMC_DEBUG opt_global.h 899HWPMC_HOOKS 900HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 901 902# 802.11 support layer 903IEEE80211_DEBUG opt_wlan.h 904IEEE80211_DEBUG_REFCNT opt_wlan.h 905IEEE80211_SUPPORT_MESH opt_wlan.h 906IEEE80211_SUPPORT_SUPERG opt_wlan.h 907IEEE80211_SUPPORT_TDMA opt_wlan.h 908IEEE80211_ALQ opt_wlan.h 909IEEE80211_DFS_DEBUG opt_wlan.h 910 911# 802.11 TDMA support 912TDMA_SLOTLEN_DEFAULT opt_tdma.h 913TDMA_SLOTCNT_DEFAULT opt_tdma.h 914TDMA_BINTVAL_DEFAULT opt_tdma.h 915TDMA_TXRATE_11B_DEFAULT opt_tdma.h 916TDMA_TXRATE_11G_DEFAULT opt_tdma.h 917TDMA_TXRATE_11A_DEFAULT opt_tdma.h 918TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 919TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 920TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 921TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 922TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 923 924# VideoMode 925PICKMODE_DEBUG opt_videomode.h 926 927# Network stack virtualization options 928VIMAGE opt_global.h 929VNET_DEBUG opt_global.h 930 931# Common Flash Interface (CFI) options 932CFI_SUPPORT_STRATAFLASH opt_cfi.h 933CFI_ARMEDANDDANGEROUS opt_cfi.h 934CFI_HARDWAREBYTESWAP opt_cfi.h 935 936# Sound options 937SND_DEBUG opt_snd.h 938SND_DIAGNOSTIC opt_snd.h 939SND_FEEDER_MULTIFORMAT opt_snd.h 940SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 941SND_FEEDER_RATE_HP opt_snd.h 942SND_PCM_64 opt_snd.h 943SND_OLDSTEREO opt_snd.h 944 945X86BIOS 946 947# Flattened device tree options 948FDT opt_platform.h 949FDT_DTB_STATIC opt_platform.h 950 951# OFED Infiniband stack 952OFED opt_ofed.h 953OFED_DEBUG_INIT opt_ofed.h 954SDP opt_ofed.h 955SDP_DEBUG opt_ofed.h 956IPOIB opt_ofed.h 957IPOIB_DEBUG opt_ofed.h 958IPOIB_CM opt_ofed.h 959 960# Resource Accounting 961RACCT opt_global.h 962RACCT_DEFAULT_TO_DISABLED opt_global.h 963 964# Resource Limits 965RCTL opt_global.h 966 967# Random number generator(s) 968# With this, no entropy processor is loaded, but the entropy 969# harvesting infrastructure is present. This means an entropy 970# processor may be loaded as a module. 971RANDOM_LOADABLE opt_global.h 972# This turns on high-rate and potentially expensive harvesting in 973# the uma slab allocator. 974RANDOM_ENABLE_UMA opt_global.h 975RANDOM_ENABLE_ETHER opt_global.h 976 977# This options turns TPM into entropy source. 978TPM_HARVEST opt_tpm.h 979 980# BHND(4) driver 981BHND_LOGLEVEL opt_global.h 982 983# GPIO and child devices 984GPIO_SPI_DEBUG opt_gpio.h 985 986# SPI devices 987SPIGEN_LEGACY_CDEVNAME opt_spi.h 988 989# etherswitch(4) driver 990RTL8366_SOFT_RESET opt_etherswitch.h 991 992# evdev protocol support 993EVDEV_SUPPORT opt_evdev.h 994EVDEV_DEBUG opt_evdev.h 995UINPUT_DEBUG opt_evdev.h 996 997# Hyper-V network driver 998HN_DEBUG opt_hn.h 999 1000# CAM-based MMC stack 1001MMCCAM 1002# Encrypted kernel crash dumps 1003EKCD opt_ekcd.h 1004 1005# NVME options 1006NVME_USE_NVD opt_nvme.h 1007 1008# amdsbwd options 1009AMDSBWD_DEBUG opt_amdsbwd.h 1010 1011# gcov support 1012GCOV opt_global.h 1013LINDEBUGFS 1014