xref: /freebsd/sys/arm64/rockchip/rk_pinctrl.c (revision aa339f1d5df9e38f36a34eb522355c4eebcae6c4)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause
3  *
4  * Copyright (c) 2018 Emmanuel Vadot <manu@FreeBSD.org>
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25  * SUCH DAMAGE.
26  *
27  */
28 
29 #include <sys/param.h>
30 #include <sys/systm.h>
31 #include <sys/bus.h>
32 
33 #include <sys/gpio.h>
34 #include <sys/kernel.h>
35 #include <sys/lock.h>
36 #include <sys/module.h>
37 #include <sys/mutex.h>
38 #include <sys/rman.h>
39 
40 #include <machine/bus.h>
41 #include <machine/resource.h>
42 #include <machine/intr.h>
43 
44 #include <dev/fdt/simplebus.h>
45 
46 #include <dev/ofw/ofw_bus.h>
47 #include <dev/ofw/ofw_bus_subr.h>
48 
49 #include <dev/fdt/fdt_pinctrl.h>
50 
51 #include <dev/extres/syscon/syscon.h>
52 
53 #include "gpio_if.h"
54 #include "syscon_if.h"
55 #include "fdt_pinctrl_if.h"
56 
57 struct rk_pinctrl_pin_drive {
58 	uint32_t	bank;
59 	uint32_t	subbank;
60 	uint32_t	offset;
61 	uint32_t	value;
62 	uint32_t	ma;
63 };
64 
65 struct rk_pinctrl_bank {
66 	uint32_t	bank;
67 	uint32_t	subbank;
68 	uint32_t	offset;
69 	uint32_t	nbits;
70 };
71 
72 struct rk_pinctrl_pin_fixup {
73 	uint32_t	bank;
74 	uint32_t	subbank;
75 	uint32_t	pin;
76 	uint32_t	reg;
77 	uint32_t	bit;
78 	uint32_t	mask;
79 };
80 
81 struct rk_pinctrl_gpio {
82 	uint32_t	bank;
83 	char		*gpio_name;
84 	device_t	gpio_dev;
85 };
86 
87 struct rk_pinctrl_softc;
88 
89 struct rk_pinctrl_conf {
90 	struct rk_pinctrl_bank		*iomux_conf;
91 	uint32_t			iomux_nbanks;
92 	struct rk_pinctrl_pin_fixup	*pin_fixup;
93 	uint32_t			npin_fixup;
94 	struct rk_pinctrl_pin_drive	*pin_drive;
95 	uint32_t			npin_drive;
96 	struct rk_pinctrl_gpio		*gpio_bank;
97 	uint32_t			ngpio_bank;
98 	uint32_t	(*get_pd_offset)(struct rk_pinctrl_softc *, uint32_t);
99 	struct syscon	*(*get_syscon)(struct rk_pinctrl_softc *, uint32_t);
100 	int		(*parse_bias)(phandle_t, int);
101 	int		(*resolv_bias_value)(int, int);
102 	int		(*get_bias_value)(int, int);
103 };
104 
105 struct rk_pinctrl_softc {
106 	struct simplebus_softc	simplebus_sc;
107 	device_t		dev;
108 	struct syscon		*grf;
109 	struct syscon		*pmu;
110 	struct rk_pinctrl_conf	*conf;
111 	struct mtx		mtx;
112 };
113 
114 #define	RK_PINCTRL_LOCK(_sc)		mtx_lock_spin(&(_sc)->mtx)
115 #define	RK_PINCTRL_UNLOCK(_sc)		mtx_unlock_spin(&(_sc)->mtx)
116 #define	RK_PINCTRL_LOCK_ASSERT(_sc)	mtx_assert(&(_sc)->mtx, MA_OWNED)
117 
118 #define	RK_IOMUX(_bank, _subbank, _offset, _nbits)			\
119 {									\
120 	.bank = _bank,							\
121 	.subbank = _subbank,						\
122 	.offset = _offset,						\
123 	.nbits = _nbits,						\
124 }
125 
126 #define	RK_PINFIX(_bank, _pin, _reg, _bit, _mask)			\
127 {									\
128 	.bank = _bank,							\
129 	.pin = _pin,							\
130 	.reg = _reg,							\
131 	.bit = _bit,							\
132 	.mask = _mask,							\
133 }
134 
135 #define	RK_PINDRIVE(_bank, _subbank, _offset, _value, _ma)		\
136 {									\
137 	.bank = _bank,							\
138 	.subbank = _subbank,						\
139 	.offset = _offset,						\
140 	.value = _value,						\
141 	.ma = _ma,							\
142 }
143 #define	RK_GPIO(_bank, _name)						\
144 {									\
145 	.bank = _bank,							\
146 	.gpio_name = _name,						\
147 }
148 
149 static struct rk_pinctrl_gpio rk3288_gpio_bank[] = {
150 	RK_GPIO(0, "gpio0"),
151 	RK_GPIO(1, "gpio1"),
152 	RK_GPIO(2, "gpio2"),
153 	RK_GPIO(3, "gpio3"),
154 	RK_GPIO(4, "gpio4"),
155 	RK_GPIO(5, "gpio5"),
156 	RK_GPIO(6, "gpio6"),
157 	RK_GPIO(7, "gpio7"),
158 	RK_GPIO(8, "gpio8"),
159 };
160 
161 static struct rk_pinctrl_bank rk3288_iomux_bank[] = {
162 	/*    bank sub  offs   nbits */
163 	/* PMU */
164 	RK_IOMUX(0, 0, 0x0084, 2),
165 	RK_IOMUX(0, 1, 0x0088, 2),
166 	RK_IOMUX(0, 2, 0x008C, 2),
167 	/* GFR */
168 	RK_IOMUX(1, 3, 0x000C, 2),
169 	RK_IOMUX(2, 0, 0x0010, 2),
170 	RK_IOMUX(2, 1, 0x0014, 2),
171 	RK_IOMUX(2, 2, 0x0018, 2),
172 	RK_IOMUX(2, 3, 0x001C, 2),
173 	RK_IOMUX(3, 0, 0x0020, 2),
174 	RK_IOMUX(3, 1, 0x0024, 2),
175 	RK_IOMUX(3, 2, 0x0028, 2),
176 	RK_IOMUX(3, 3, 0x002C, 4),
177 	RK_IOMUX(4, 0, 0x0034, 4),
178 	RK_IOMUX(4, 1, 0x003C, 4),
179 	RK_IOMUX(4, 2, 0x0044, 2),
180 	RK_IOMUX(4, 3, 0x0048, 2),
181 	/* 5,0 - Empty */
182 	RK_IOMUX(5, 1, 0x0050, 2),
183 	RK_IOMUX(5, 2, 0x0054, 2),
184 	/* 5,3 - Empty */
185 	RK_IOMUX(6, 0, 0x005C, 2),
186 	RK_IOMUX(6, 1, 0x0060, 2),
187 	RK_IOMUX(6, 2, 0x0064, 2),
188 	/* 6,3 - Empty */
189 	RK_IOMUX(7, 0, 0x006C, 2),
190 	RK_IOMUX(7, 1, 0x0070, 2),
191 	RK_IOMUX(7, 2, 0x0074, 4),
192 	/* 7,3 - Empty */
193 	RK_IOMUX(8, 0, 0x0080, 2),
194 	RK_IOMUX(8, 1, 0x0084, 2),
195 	/* 8,2 - Empty */
196 	/* 8,3 - Empty */
197 
198 };
199 
200 static struct rk_pinctrl_pin_fixup rk3288_pin_fixup[] = {
201 };
202 
203 static struct rk_pinctrl_pin_drive rk3288_pin_drive[] = {
204 	/*       bank sub offs val ma */
205 	/* GPIO0A (PMU)*/
206 	RK_PINDRIVE(0, 0, 0x070, 0, 2),
207 	RK_PINDRIVE(0, 0, 0x070, 1, 4),
208 	RK_PINDRIVE(0, 0, 0x070, 2, 8),
209 	RK_PINDRIVE(0, 0, 0x070, 3, 12),
210 
211 	/* GPIO0B (PMU)*/
212 	RK_PINDRIVE(0, 1, 0x074, 0, 2),
213 	RK_PINDRIVE(0, 1, 0x074, 1, 4),
214 	RK_PINDRIVE(0, 1, 0x074, 2, 8),
215 	RK_PINDRIVE(0, 1, 0x074, 3, 12),
216 
217 	/* GPIO0C (PMU)*/
218 	RK_PINDRIVE(0, 2, 0x078, 0, 2),
219 	RK_PINDRIVE(0, 2, 0x078, 1, 4),
220 	RK_PINDRIVE(0, 2, 0x078, 2, 8),
221 	RK_PINDRIVE(0, 2, 0x078, 3, 12),
222 
223 	/* GPIO1D */
224 	RK_PINDRIVE(1, 3, 0x1CC, 0, 2),
225 	RK_PINDRIVE(1, 3, 0x1CC, 1, 4),
226 	RK_PINDRIVE(1, 3, 0x1CC, 2, 8),
227 	RK_PINDRIVE(1, 3, 0x1CC, 3, 12),
228 
229 	/* GPIO2A */
230 	RK_PINDRIVE(2, 0, 0x1D0, 0, 2),
231 	RK_PINDRIVE(2, 0, 0x1D0, 1, 4),
232 	RK_PINDRIVE(2, 0, 0x1D0, 2, 8),
233 	RK_PINDRIVE(2, 0, 0x1D0, 3, 12),
234 
235 	/* GPIO2B */
236 	RK_PINDRIVE(2, 1, 0x1D4, 0, 2),
237 	RK_PINDRIVE(2, 1, 0x1D4, 1, 4),
238 	RK_PINDRIVE(2, 1, 0x1D4, 2, 8),
239 	RK_PINDRIVE(2, 1, 0x1D4, 3, 12),
240 
241 	/* GPIO2C */
242 	RK_PINDRIVE(2, 2, 0x1D8, 0, 2),
243 	RK_PINDRIVE(2, 2, 0x1D8, 1, 4),
244 	RK_PINDRIVE(2, 2, 0x1D8, 2, 8),
245 	RK_PINDRIVE(2, 2, 0x1D8, 3, 12),
246 
247 	/* GPIO2D */
248 	RK_PINDRIVE(2, 3, 0x1DC, 0, 2),
249 	RK_PINDRIVE(2, 3, 0x1DC, 1, 4),
250 	RK_PINDRIVE(2, 3, 0x1DC, 2, 8),
251 	RK_PINDRIVE(2, 3, 0x1DC, 3, 12),
252 
253 	/* GPIO3A */
254 	RK_PINDRIVE(3, 0, 0x1E0, 0, 2),
255 	RK_PINDRIVE(3, 0, 0x1E0, 1, 4),
256 	RK_PINDRIVE(3, 0, 0x1E0, 2, 8),
257 	RK_PINDRIVE(3, 0, 0x1E0, 3, 12),
258 
259 	/* GPIO3B */
260 	RK_PINDRIVE(3, 1, 0x1E4, 0, 2),
261 	RK_PINDRIVE(3, 1, 0x1E4, 1, 4),
262 	RK_PINDRIVE(3, 1, 0x1E4, 2, 8),
263 	RK_PINDRIVE(3, 1, 0x1E4, 3, 12),
264 
265 	/* GPIO3C */
266 	RK_PINDRIVE(3, 2, 0x1E8, 0, 2),
267 	RK_PINDRIVE(3, 2, 0x1E8, 1, 4),
268 	RK_PINDRIVE(3, 2, 0x1E8, 2, 8),
269 	RK_PINDRIVE(3, 2, 0x1E8, 3, 12),
270 
271 	/* GPIO3D */
272 	RK_PINDRIVE(3, 3, 0x1EC, 0, 2),
273 	RK_PINDRIVE(3, 3, 0x1EC, 1, 4),
274 	RK_PINDRIVE(3, 3, 0x1EC, 2, 8),
275 	RK_PINDRIVE(3, 3, 0x1EC, 3, 12),
276 
277 	/* GPIO4A */
278 	RK_PINDRIVE(4, 0, 0x1F0, 0, 2),
279 	RK_PINDRIVE(4, 0, 0x1F0, 1, 4),
280 	RK_PINDRIVE(4, 0, 0x1F0, 2, 8),
281 	RK_PINDRIVE(4, 0, 0x1F0, 3, 12),
282 
283 	/* GPIO4B */
284 	RK_PINDRIVE(4, 1, 0x1F4, 0, 2),
285 	RK_PINDRIVE(4, 1, 0x1F4, 1, 4),
286 	RK_PINDRIVE(4, 1, 0x1F4, 2, 8),
287 	RK_PINDRIVE(4, 1, 0x1F4, 3, 12),
288 
289 	/* GPIO4C */
290 	RK_PINDRIVE(4, 2, 0x1F8, 0, 2),
291 	RK_PINDRIVE(4, 2, 0x1F8, 1, 4),
292 	RK_PINDRIVE(4, 2, 0x1F8, 2, 8),
293 	RK_PINDRIVE(4, 2, 0x1F8, 3, 12),
294 
295 	/* GPIO4D */
296 	RK_PINDRIVE(4, 3, 0x1FC, 0, 2),
297 	RK_PINDRIVE(4, 3, 0x1FC, 1, 4),
298 	RK_PINDRIVE(4, 3, 0x1FC, 2, 8),
299 	RK_PINDRIVE(4, 3, 0x1FC, 3, 12),
300 
301 	/* GPIO5B */
302 	RK_PINDRIVE(5, 1, 0x204, 0, 2),
303 	RK_PINDRIVE(5, 1, 0x204, 1, 4),
304 	RK_PINDRIVE(5, 1, 0x204, 2, 8),
305 	RK_PINDRIVE(5, 1, 0x204, 3, 12),
306 
307 	/* GPIO5C */
308 	RK_PINDRIVE(5, 2, 0x208, 0, 2),
309 	RK_PINDRIVE(5, 2, 0x208, 1, 4),
310 	RK_PINDRIVE(5, 2, 0x208, 2, 8),
311 	RK_PINDRIVE(5, 2, 0x208, 3, 12),
312 
313 	/* GPIO6A */
314 	RK_PINDRIVE(6, 0, 0x210, 0, 2),
315 	RK_PINDRIVE(6, 0, 0x210, 1, 4),
316 	RK_PINDRIVE(6, 0, 0x210, 2, 8),
317 	RK_PINDRIVE(6, 0, 0x210, 3, 12),
318 
319 	/* GPIO6B */
320 	RK_PINDRIVE(6, 1, 0x214, 0, 2),
321 	RK_PINDRIVE(6, 1, 0x214, 1, 4),
322 	RK_PINDRIVE(6, 1, 0x214, 2, 8),
323 	RK_PINDRIVE(6, 1, 0x214, 3, 12),
324 
325 	/* GPIO6C */
326 	RK_PINDRIVE(6, 2, 0x218, 0, 2),
327 	RK_PINDRIVE(6, 2, 0x218, 1, 4),
328 	RK_PINDRIVE(6, 2, 0x218, 2, 8),
329 	RK_PINDRIVE(6, 2, 0x218, 3, 12),
330 
331 	/* GPIO7A */
332 	RK_PINDRIVE(7, 0, 0x220, 0, 2),
333 	RK_PINDRIVE(7, 0, 0x220, 1, 4),
334 	RK_PINDRIVE(7, 0, 0x220, 2, 8),
335 	RK_PINDRIVE(7, 0, 0x220, 3, 12),
336 
337 	/* GPIO7B */
338 	RK_PINDRIVE(7, 1, 0x224, 0, 2),
339 	RK_PINDRIVE(7, 1, 0x224, 1, 4),
340 	RK_PINDRIVE(7, 1, 0x224, 2, 8),
341 	RK_PINDRIVE(7, 1, 0x224, 3, 12),
342 
343 	/* GPIO7C */
344 	RK_PINDRIVE(7, 2, 0x228, 0, 2),
345 	RK_PINDRIVE(7, 2, 0x228, 1, 4),
346 	RK_PINDRIVE(7, 2, 0x228, 2, 8),
347 	RK_PINDRIVE(7, 2, 0x228, 3, 12),
348 
349 	/* GPIO8A */
350 	RK_PINDRIVE(8, 0, 0x230, 0, 2),
351 	RK_PINDRIVE(8, 0, 0x230, 1, 4),
352 	RK_PINDRIVE(8, 0, 0x230, 2, 8),
353 	RK_PINDRIVE(8, 0, 0x230, 3, 12),
354 
355 	/* GPIO8B */
356 	RK_PINDRIVE(8, 1, 0x234, 0, 2),
357 	RK_PINDRIVE(8, 1, 0x234, 1, 4),
358 	RK_PINDRIVE(8, 1, 0x234, 2, 8),
359 	RK_PINDRIVE(8, 1, 0x234, 3, 12),
360 };
361 
362 static uint32_t
363 rk3288_get_pd_offset(struct rk_pinctrl_softc *sc, uint32_t bank)
364 {
365 	if (bank == 0)
366 		return (0x064);		/* PMU */
367 	return (0x130);
368 }
369 
370 static struct syscon *
371 rk3288_get_syscon(struct rk_pinctrl_softc *sc, uint32_t bank)
372 {
373 	if (bank == 0)
374 		return (sc->pmu);
375 	return (sc->grf);
376 }
377 
378 static int
379 rk3288_parse_bias(phandle_t node, int bank)
380 {
381 	if (OF_hasprop(node, "bias-disable"))
382 		return (0);
383 	if (OF_hasprop(node, "bias-pull-up"))
384 		return (1);
385 	if (OF_hasprop(node, "bias-pull-down"))
386 		return (2);
387 
388 	return (-1);
389 }
390 
391 static int
392 rk3288_resolv_bias_value(int bank, int bias)
393 {
394 	int rv = 0;
395 
396 	if (bias == 1)
397 		rv = GPIO_PIN_PULLUP;
398 	else if (bias == 2)
399 		rv = GPIO_PIN_PULLDOWN;
400 
401 	return (rv);
402 }
403 
404 static int
405 rk3288_get_bias_value(int bank, int bias)
406 {
407 	int rv = 0;
408 
409 	if (bias & GPIO_PIN_PULLUP)
410 		rv = 1;
411 	else if (bias & GPIO_PIN_PULLDOWN)
412 		rv = 2;
413 
414 	return (rv);
415 }
416 
417 struct rk_pinctrl_conf rk3288_conf = {
418 	.iomux_conf = rk3288_iomux_bank,
419 	.iomux_nbanks = nitems(rk3288_iomux_bank),
420 	.pin_fixup = rk3288_pin_fixup,
421 	.npin_fixup = nitems(rk3288_pin_fixup),
422 	.pin_drive = rk3288_pin_drive,
423 	.npin_drive = nitems(rk3288_pin_drive),
424 	.gpio_bank = rk3288_gpio_bank,
425 	.ngpio_bank = nitems(rk3288_gpio_bank),
426 	.get_pd_offset = rk3288_get_pd_offset,
427 	.get_syscon = rk3288_get_syscon,
428 	.parse_bias = rk3288_parse_bias,
429 	.resolv_bias_value = rk3288_resolv_bias_value,
430 	.get_bias_value = rk3288_get_bias_value,
431 };
432 
433 static struct rk_pinctrl_gpio rk3328_gpio_bank[] = {
434 	RK_GPIO(0, "gpio0"),
435 	RK_GPIO(1, "gpio1"),
436 	RK_GPIO(2, "gpio2"),
437 	RK_GPIO(3, "gpio3"),
438 };
439 
440 static struct rk_pinctrl_bank rk3328_iomux_bank[] = {
441 	/*    bank sub offs nbits */
442 	RK_IOMUX(0, 0, 0x0000, 2),
443 	RK_IOMUX(0, 1, 0x0004, 2),
444 	RK_IOMUX(0, 2, 0x0008, 2),
445 	RK_IOMUX(0, 3, 0x000C, 2),
446 	RK_IOMUX(1, 0, 0x0010, 2),
447 	RK_IOMUX(1, 1, 0x0014, 2),
448 	RK_IOMUX(1, 2, 0x0018, 2),
449 	RK_IOMUX(1, 3, 0x001C, 2),
450 	RK_IOMUX(2, 0, 0x0020, 2),
451 	RK_IOMUX(2, 1, 0x0024, 3),
452 	RK_IOMUX(2, 2, 0x002c, 3),
453 	RK_IOMUX(2, 3, 0x0034, 2),
454 	RK_IOMUX(3, 0, 0x0038, 3),
455 	RK_IOMUX(3, 1, 0x0040, 3),
456 	RK_IOMUX(3, 2, 0x0048, 2),
457 	RK_IOMUX(3, 3, 0x004c, 2),
458 };
459 
460 static struct rk_pinctrl_pin_fixup rk3328_pin_fixup[] = {
461 	/*      bank  pin reg  bit  mask */
462 	RK_PINFIX(2, 12, 0x24,  8, 0x300),
463 	RK_PINFIX(2, 15, 0x28,  0, 0x7),
464 	RK_PINFIX(2, 23, 0x30, 14, 0x6000),
465 };
466 
467 static struct rk_pinctrl_pin_drive rk3328_pin_drive[] = {
468 	/*       bank sub  offs val ma */
469 	RK_PINDRIVE(0, 0, 0x200, 0, 2),
470 	RK_PINDRIVE(0, 0, 0x200, 1, 4),
471 	RK_PINDRIVE(0, 0, 0x200, 2, 8),
472 	RK_PINDRIVE(0, 0, 0x200, 3, 12),
473 
474 	RK_PINDRIVE(0, 1, 0x204, 0, 2),
475 	RK_PINDRIVE(0, 1, 0x204, 1, 4),
476 	RK_PINDRIVE(0, 1, 0x204, 2, 8),
477 	RK_PINDRIVE(0, 1, 0x204, 3, 12),
478 
479 	RK_PINDRIVE(0, 2, 0x208, 0, 2),
480 	RK_PINDRIVE(0, 2, 0x208, 1, 4),
481 	RK_PINDRIVE(0, 2, 0x208, 2, 8),
482 	RK_PINDRIVE(0, 2, 0x208, 3, 12),
483 
484 	RK_PINDRIVE(0, 3, 0x20C, 0, 2),
485 	RK_PINDRIVE(0, 3, 0x20C, 1, 4),
486 	RK_PINDRIVE(0, 3, 0x20C, 2, 8),
487 	RK_PINDRIVE(0, 3, 0x20C, 3, 12),
488 
489 	RK_PINDRIVE(1, 0, 0x210, 0, 2),
490 	RK_PINDRIVE(1, 0, 0x210, 1, 4),
491 	RK_PINDRIVE(1, 0, 0x210, 2, 8),
492 	RK_PINDRIVE(1, 0, 0x210, 3, 12),
493 
494 	RK_PINDRIVE(1, 1, 0x214, 0, 2),
495 	RK_PINDRIVE(1, 1, 0x214, 1, 4),
496 	RK_PINDRIVE(1, 1, 0x214, 2, 8),
497 	RK_PINDRIVE(1, 1, 0x214, 3, 12),
498 
499 	RK_PINDRIVE(1, 2, 0x218, 0, 2),
500 	RK_PINDRIVE(1, 2, 0x218, 1, 4),
501 	RK_PINDRIVE(1, 2, 0x218, 2, 8),
502 	RK_PINDRIVE(1, 2, 0x218, 3, 12),
503 
504 	RK_PINDRIVE(1, 3, 0x21C, 0, 2),
505 	RK_PINDRIVE(1, 3, 0x21C, 1, 4),
506 	RK_PINDRIVE(1, 3, 0x21C, 2, 8),
507 	RK_PINDRIVE(1, 3, 0x21C, 3, 12),
508 
509 	RK_PINDRIVE(2, 0, 0x220, 0, 2),
510 	RK_PINDRIVE(2, 0, 0x220, 1, 4),
511 	RK_PINDRIVE(2, 0, 0x220, 2, 8),
512 	RK_PINDRIVE(2, 0, 0x220, 3, 12),
513 
514 	RK_PINDRIVE(2, 1, 0x224, 0, 2),
515 	RK_PINDRIVE(2, 1, 0x224, 1, 4),
516 	RK_PINDRIVE(2, 1, 0x224, 2, 8),
517 	RK_PINDRIVE(2, 1, 0x224, 3, 12),
518 
519 	RK_PINDRIVE(2, 2, 0x228, 0, 2),
520 	RK_PINDRIVE(2, 2, 0x228, 1, 4),
521 	RK_PINDRIVE(2, 2, 0x228, 2, 8),
522 	RK_PINDRIVE(2, 2, 0x228, 3, 12),
523 
524 	RK_PINDRIVE(2, 3, 0x22C, 0, 2),
525 	RK_PINDRIVE(2, 3, 0x22C, 1, 4),
526 	RK_PINDRIVE(2, 3, 0x22C, 2, 8),
527 	RK_PINDRIVE(2, 3, 0x22C, 3, 12),
528 
529 	RK_PINDRIVE(3, 0, 0x230, 0, 2),
530 	RK_PINDRIVE(3, 0, 0x230, 1, 4),
531 	RK_PINDRIVE(3, 0, 0x230, 2, 8),
532 	RK_PINDRIVE(3, 0, 0x230, 3, 12),
533 
534 	RK_PINDRIVE(3, 1, 0x234, 0, 2),
535 	RK_PINDRIVE(3, 1, 0x234, 1, 4),
536 	RK_PINDRIVE(3, 1, 0x234, 2, 8),
537 	RK_PINDRIVE(3, 1, 0x234, 3, 12),
538 
539 	RK_PINDRIVE(3, 2, 0x238, 0, 2),
540 	RK_PINDRIVE(3, 2, 0x238, 1, 4),
541 	RK_PINDRIVE(3, 2, 0x238, 2, 8),
542 	RK_PINDRIVE(3, 2, 0x238, 3, 12),
543 
544 	RK_PINDRIVE(3, 3, 0x23C, 0, 2),
545 	RK_PINDRIVE(3, 3, 0x23C, 1, 4),
546 	RK_PINDRIVE(3, 3, 0x23C, 2, 8),
547 	RK_PINDRIVE(3, 3, 0x23C, 3, 12),
548 };
549 
550 static uint32_t
551 rk3328_get_pd_offset(struct rk_pinctrl_softc *sc, uint32_t bank)
552 {
553 	return (0x100);
554 }
555 
556 static struct syscon *
557 rk3328_get_syscon(struct rk_pinctrl_softc *sc, uint32_t bank)
558 {
559 	return (sc->grf);
560 }
561 
562 struct rk_pinctrl_conf rk3328_conf = {
563 	.iomux_conf = rk3328_iomux_bank,
564 	.iomux_nbanks = nitems(rk3328_iomux_bank),
565 	.pin_fixup = rk3328_pin_fixup,
566 	.npin_fixup = nitems(rk3328_pin_fixup),
567 	.pin_drive = rk3328_pin_drive,
568 	.npin_drive = nitems(rk3328_pin_drive),
569 	.gpio_bank = rk3328_gpio_bank,
570 	.ngpio_bank = nitems(rk3328_gpio_bank),
571 	.get_pd_offset = rk3328_get_pd_offset,
572 	.get_syscon = rk3328_get_syscon,
573 	.parse_bias = rk3288_parse_bias,
574 	.resolv_bias_value = rk3288_resolv_bias_value,
575 	.get_bias_value = rk3288_get_bias_value,
576 };
577 
578 static struct rk_pinctrl_gpio rk3399_gpio_bank[] = {
579 	RK_GPIO(0, "gpio0"),
580 	RK_GPIO(1, "gpio1"),
581 	RK_GPIO(2, "gpio2"),
582 	RK_GPIO(3, "gpio3"),
583 	RK_GPIO(4, "gpio4"),
584 };
585 
586 static struct rk_pinctrl_bank rk3399_iomux_bank[] = {
587 	/*    bank sub  offs   nbits */
588 	RK_IOMUX(0, 0, 0x0000, 2),
589 	RK_IOMUX(0, 1, 0x0004, 2),
590 	RK_IOMUX(0, 2, 0x0008, 2),
591 	RK_IOMUX(0, 3, 0x000C, 2),
592 	RK_IOMUX(1, 0, 0x0010, 2),
593 	RK_IOMUX(1, 1, 0x0014, 2),
594 	RK_IOMUX(1, 2, 0x0018, 2),
595 	RK_IOMUX(1, 3, 0x001C, 2),
596 	RK_IOMUX(2, 0, 0xE000, 2),
597 	RK_IOMUX(2, 1, 0xE004, 2),
598 	RK_IOMUX(2, 2, 0xE008, 2),
599 	RK_IOMUX(2, 3, 0xE00C, 2),
600 	RK_IOMUX(3, 0, 0xE010, 2),
601 	RK_IOMUX(3, 1, 0xE014, 2),
602 	RK_IOMUX(3, 2, 0xE018, 2),
603 	RK_IOMUX(3, 3, 0xE01C, 2),
604 	RK_IOMUX(4, 0, 0xE020, 2),
605 	RK_IOMUX(4, 1, 0xE024, 2),
606 	RK_IOMUX(4, 2, 0xE028, 2),
607 	RK_IOMUX(4, 3, 0xE02C, 2),
608 };
609 
610 static struct rk_pinctrl_pin_fixup rk3399_pin_fixup[] = {};
611 
612 static struct rk_pinctrl_pin_drive rk3399_pin_drive[] = {
613 	/*       bank sub offs val ma */
614 	/* GPIO0A */
615 	RK_PINDRIVE(0, 0, 0x80, 0, 5),
616 	RK_PINDRIVE(0, 0, 0x80, 1, 10),
617 	RK_PINDRIVE(0, 0, 0x80, 2, 15),
618 	RK_PINDRIVE(0, 0, 0x80, 3, 20),
619 
620 	/* GPIOB */
621 	RK_PINDRIVE(0, 1, 0x88, 0, 5),
622 	RK_PINDRIVE(0, 1, 0x88, 1, 10),
623 	RK_PINDRIVE(0, 1, 0x88, 2, 15),
624 	RK_PINDRIVE(0, 1, 0x88, 3, 20),
625 
626 	/* GPIO1A */
627 	RK_PINDRIVE(1, 0, 0xA0, 0, 3),
628 	RK_PINDRIVE(1, 0, 0xA0, 1, 6),
629 	RK_PINDRIVE(1, 0, 0xA0, 2, 9),
630 	RK_PINDRIVE(1, 0, 0xA0, 3, 12),
631 
632 	/* GPIO1B */
633 	RK_PINDRIVE(1, 1, 0xA8, 0, 3),
634 	RK_PINDRIVE(1, 1, 0xA8, 1, 6),
635 	RK_PINDRIVE(1, 1, 0xA8, 2, 9),
636 	RK_PINDRIVE(1, 1, 0xA8, 3, 12),
637 
638 	/* GPIO1C */
639 	RK_PINDRIVE(1, 2, 0xB0, 0, 3),
640 	RK_PINDRIVE(1, 2, 0xB0, 1, 6),
641 	RK_PINDRIVE(1, 2, 0xB0, 2, 9),
642 	RK_PINDRIVE(1, 2, 0xB0, 3, 12),
643 
644 	/* GPIO1D */
645 	RK_PINDRIVE(1, 3, 0xB8, 0, 3),
646 	RK_PINDRIVE(1, 3, 0xB8, 1, 6),
647 	RK_PINDRIVE(1, 3, 0xB8, 2, 9),
648 	RK_PINDRIVE(1, 3, 0xB8, 3, 12),
649 };
650 
651 static uint32_t
652 rk3399_get_pd_offset(struct rk_pinctrl_softc *sc, uint32_t bank)
653 {
654 	if (bank < 2)
655 		return (0x40);
656 
657 	return (0xE040);
658 }
659 
660 static struct syscon *
661 rk3399_get_syscon(struct rk_pinctrl_softc *sc, uint32_t bank)
662 {
663 	if (bank < 2)
664 		return (sc->pmu);
665 
666 	return (sc->grf);
667 }
668 
669 static int
670 rk3399_parse_bias(phandle_t node, int bank)
671 {
672 	int pullup, pulldown;
673 
674 	if (OF_hasprop(node, "bias-disable"))
675 		return (0);
676 
677 	switch (bank) {
678 	case 0:
679 	case 2:
680 		pullup = 3;
681 		pulldown = 1;
682 		break;
683 	case 1:
684 	case 3:
685 	case 4:
686 		pullup = 1;
687 		pulldown = 2;
688 		break;
689 	}
690 
691 	if (OF_hasprop(node, "bias-pull-up"))
692 		return (pullup);
693 	if (OF_hasprop(node, "bias-pull-down"))
694 		return (pulldown);
695 
696 	return (-1);
697 }
698 
699 static int
700 rk3399_resolv_bias_value(int bank, int bias)
701 {
702 	int rv = 0;
703 
704 	switch (bank) {
705 	case 0:
706 	case 2:
707 		if (bias == 3)
708 			rv = GPIO_PIN_PULLUP;
709 		else if (bias == 1)
710 			rv = GPIO_PIN_PULLDOWN;
711 		break;
712 	case 1:
713 	case 3:
714 	case 4:
715 		if (bias == 1)
716 			rv = GPIO_PIN_PULLUP;
717 		else if (bias == 2)
718 			rv = GPIO_PIN_PULLDOWN;
719 		break;
720 	}
721 
722 	return (rv);
723 }
724 
725 static int
726 rk3399_get_bias_value(int bank, int bias)
727 {
728 	int rv = 0;
729 
730 	switch (bank) {
731 	case 0:
732 	case 2:
733 		if (bias & GPIO_PIN_PULLUP)
734 			rv = 3;
735 		else if (bias & GPIO_PIN_PULLDOWN)
736 			rv = 1;
737 		break;
738 	case 1:
739 	case 3:
740 	case 4:
741 		if (bias & GPIO_PIN_PULLUP)
742 			rv = 1;
743 		else if (bias & GPIO_PIN_PULLDOWN)
744 			rv = 2;
745 		break;
746 	}
747 
748 	return (rv);
749 }
750 
751 struct rk_pinctrl_conf rk3399_conf = {
752 	.iomux_conf = rk3399_iomux_bank,
753 	.iomux_nbanks = nitems(rk3399_iomux_bank),
754 	.pin_fixup = rk3399_pin_fixup,
755 	.npin_fixup = nitems(rk3399_pin_fixup),
756 	.pin_drive = rk3399_pin_drive,
757 	.npin_drive = nitems(rk3399_pin_drive),
758 	.gpio_bank = rk3399_gpio_bank,
759 	.ngpio_bank = nitems(rk3399_gpio_bank),
760 	.get_pd_offset = rk3399_get_pd_offset,
761 	.get_syscon = rk3399_get_syscon,
762 	.parse_bias = rk3399_parse_bias,
763 	.resolv_bias_value = rk3399_resolv_bias_value,
764 	.get_bias_value = rk3399_get_bias_value,
765 };
766 
767 #define	GRF_IOFUNC_SEL0		0x0300
768 #define	 GMAC1_IOMUX_SEL_M0		0x01000000
769 #define	 GMAC1_IOMUX_SEL_M1		0x01000100
770 
771 static struct rk_pinctrl_gpio rk3568_gpio_bank[] = {
772 	RK_GPIO(0, "gpio0"),
773 	RK_GPIO(1, "gpio1"),
774 	RK_GPIO(2, "gpio2"),
775 	RK_GPIO(3, "gpio3"),
776 	RK_GPIO(4, "gpio4"),
777 };
778 
779 static struct rk_pinctrl_bank rk3568_iomux_bank[] = {
780 	/*    bank sub  offs   nbits */
781 	RK_IOMUX(0, 0, 0x0000, 4),	/* PMU_GRF */
782 	RK_IOMUX(0, 1, 0x0008, 4),
783 	RK_IOMUX(0, 2, 0x0010, 4),
784 	RK_IOMUX(0, 3, 0x0018, 4),
785 
786 	RK_IOMUX(1, 0, 0x0000, 4),	/* SYS_GRF */
787 	RK_IOMUX(1, 1, 0x0008, 4),
788 	RK_IOMUX(1, 2, 0x0010, 4),
789 	RK_IOMUX(1, 3, 0x0018, 4),
790 	RK_IOMUX(2, 0, 0x0020, 4),
791 	RK_IOMUX(2, 1, 0x0028, 4),
792 	RK_IOMUX(2, 2, 0x0030, 4),
793 	RK_IOMUX(2, 3, 0x0038, 4),
794 	RK_IOMUX(3, 0, 0x0040, 4),
795 	RK_IOMUX(3, 1, 0x0048, 4),
796 	RK_IOMUX(3, 2, 0x0050, 4),
797 	RK_IOMUX(3, 3, 0x0058, 4),
798 	RK_IOMUX(4, 0, 0x0060, 4),
799 	RK_IOMUX(4, 1, 0x0068, 4),
800 	RK_IOMUX(4, 2, 0x0070, 4),
801 	RK_IOMUX(4, 3, 0x0078, 4),
802 };
803 
804 static struct rk_pinctrl_pin_fixup rk3568_pin_fixup[] = {};
805 
806 static struct rk_pinctrl_pin_drive rk3568_pin_drive[] = {
807 	/*       bank sub offs val ma */
808 	/* GPIO0A */
809 	RK_PINDRIVE(0, 0, 0x0020, 0, 2),
810 	RK_PINDRIVE(0, 0, 0x0020, 1, 4),
811 	RK_PINDRIVE(0, 0, 0x0020, 2, 8),
812 	RK_PINDRIVE(0, 0, 0x0020, 3, 12),
813 
814 	/* GPIO0B */
815 	RK_PINDRIVE(0, 1, 0x0024, 0, 2),
816 	RK_PINDRIVE(0, 1, 0x0024, 1, 4),
817 	RK_PINDRIVE(0, 1, 0x0024, 2, 8),
818 	RK_PINDRIVE(0, 1, 0x0024, 3, 12),
819 
820 	/* GPIO0C */
821 	RK_PINDRIVE(0, 1, 0x0028, 0, 2),
822 	RK_PINDRIVE(0, 1, 0x0028, 1, 4),
823 	RK_PINDRIVE(0, 1, 0x0028, 2, 8),
824 	RK_PINDRIVE(0, 1, 0x0028, 3, 12),
825 
826 	/* GPIO0D */
827 	RK_PINDRIVE(0, 1, 0x002c, 0, 2),
828 	RK_PINDRIVE(0, 1, 0x002c, 1, 4),
829 	RK_PINDRIVE(0, 1, 0x002c, 2, 8),
830 	RK_PINDRIVE(0, 1, 0x002c, 3, 12),
831 
832 	/* GPIO1A */
833 	RK_PINDRIVE(1, 0, 0x0080, 0, 2),
834 	RK_PINDRIVE(1, 0, 0x0080, 1, 4),
835 	RK_PINDRIVE(1, 0, 0x0080, 2, 8),
836 	RK_PINDRIVE(1, 0, 0x0080, 3, 12),
837 
838 	/* GPIO1B */
839 	RK_PINDRIVE(1, 1, 0x0084, 0, 2),
840 	RK_PINDRIVE(1, 1, 0x0084, 1, 4),
841 	RK_PINDRIVE(1, 1, 0x0084, 2, 8),
842 	RK_PINDRIVE(1, 1, 0x0084, 3, 12),
843 
844 	/* GPIO1C */
845 	RK_PINDRIVE(1, 2, 0x0088, 0, 2),
846 	RK_PINDRIVE(1, 2, 0x0088, 1, 4),
847 	RK_PINDRIVE(1, 2, 0x0088, 2, 8),
848 	RK_PINDRIVE(1, 2, 0x0088, 3, 12),
849 
850 	/* GPIO1D */
851 	RK_PINDRIVE(1, 3, 0x008c, 0, 2),
852 	RK_PINDRIVE(1, 3, 0x008c, 1, 4),
853 	RK_PINDRIVE(1, 3, 0x008c, 2, 8),
854 	RK_PINDRIVE(1, 3, 0x008c, 3, 12),
855 
856 	/* GPIO2A */
857 	RK_PINDRIVE(2, 0, 0x0090, 0, 2),
858 	RK_PINDRIVE(2, 0, 0x0090, 1, 4),
859 	RK_PINDRIVE(2, 0, 0x0090, 2, 8),
860 	RK_PINDRIVE(2, 0, 0x0090, 3, 12),
861 
862 	/* GPIO2B */
863 	RK_PINDRIVE(2, 1, 0x0094, 0, 2),
864 	RK_PINDRIVE(2, 1, 0x0094, 1, 4),
865 	RK_PINDRIVE(2, 1, 0x0094, 2, 8),
866 	RK_PINDRIVE(2, 1, 0x0094, 3, 12),
867 
868 	/* GPIO2C */
869 	RK_PINDRIVE(2, 2, 0x0098, 0, 2),
870 	RK_PINDRIVE(2, 2, 0x0098, 1, 4),
871 	RK_PINDRIVE(2, 2, 0x0098, 2, 8),
872 	RK_PINDRIVE(2, 2, 0x0098, 3, 12),
873 
874 	/* GPIO2D */
875 	RK_PINDRIVE(2, 3, 0x009c, 0, 2),
876 	RK_PINDRIVE(2, 3, 0x009c, 1, 4),
877 	RK_PINDRIVE(2, 3, 0x009c, 2, 8),
878 	RK_PINDRIVE(2, 3, 0x009c, 3, 12),
879 
880 	/* GPIO3A */
881 	RK_PINDRIVE(3, 0, 0x00a0, 0, 2),
882 	RK_PINDRIVE(3, 0, 0x00a0, 1, 4),
883 	RK_PINDRIVE(3, 0, 0x00a0, 2, 8),
884 	RK_PINDRIVE(3, 0, 0x00a0, 3, 12),
885 
886 	/* GPIO3B */
887 	RK_PINDRIVE(3, 1, 0x00a4, 0, 2),
888 	RK_PINDRIVE(3, 1, 0x00a4, 1, 4),
889 	RK_PINDRIVE(3, 1, 0x00a4, 2, 8),
890 	RK_PINDRIVE(3, 1, 0x00a4, 3, 12),
891 
892 	/* GPIO3C */
893 	RK_PINDRIVE(3, 2, 0x00a8, 0, 2),
894 	RK_PINDRIVE(3, 2, 0x00a8, 1, 4),
895 	RK_PINDRIVE(3, 2, 0x00a8, 2, 8),
896 	RK_PINDRIVE(3, 2, 0x00a8, 3, 12),
897 
898 	/* GPIO3D */
899 	RK_PINDRIVE(3, 3, 0x00ac, 0, 2),
900 	RK_PINDRIVE(3, 3, 0x00ac, 1, 4),
901 	RK_PINDRIVE(3, 3, 0x00ac, 2, 8),
902 	RK_PINDRIVE(3, 3, 0x00ac, 3, 12),
903 
904 	/* GPIO4A */
905 	RK_PINDRIVE(4, 0, 0x00b0, 0, 2),
906 	RK_PINDRIVE(4, 0, 0x00b0, 1, 4),
907 	RK_PINDRIVE(4, 0, 0x00b0, 2, 8),
908 	RK_PINDRIVE(4, 0, 0x00b0, 3, 12),
909 
910 	/* GPIO4B */
911 	RK_PINDRIVE(4, 1, 0x00b4, 0, 2),
912 	RK_PINDRIVE(4, 1, 0x00b4, 1, 4),
913 	RK_PINDRIVE(4, 1, 0x00b4, 2, 8),
914 	RK_PINDRIVE(4, 1, 0x00b4, 3, 12),
915 
916 	/* GPIO4C */
917 	RK_PINDRIVE(4, 2, 0x00b8, 0, 2),
918 	RK_PINDRIVE(4, 2, 0x00b8, 1, 4),
919 	RK_PINDRIVE(4, 2, 0x00b8, 2, 8),
920 	RK_PINDRIVE(4, 2, 0x00b8, 3, 12),
921 
922 	/* GPIO4D */
923 	RK_PINDRIVE(4, 3, 0x00bc, 0, 2),
924 	RK_PINDRIVE(4, 3, 0x00bc, 1, 4),
925 	RK_PINDRIVE(4, 3, 0x00bc, 2, 8),
926 	RK_PINDRIVE(4, 3, 0x00bc, 3, 12),
927 };
928 
929 static uint32_t
930 rk3568_get_pd_offset(struct rk_pinctrl_softc *sc, uint32_t bank)
931 {
932 
933 	if (bank == 0)
934 		return (0x20);
935 
936 	/*
937 	 * Registers start at 0x80, but bank index starts at 1. Return 0x70
938 	 * so later calculations get the correct offset.
939 	 */
940 	return (0x70);
941 }
942 
943 static struct syscon *
944 rk3568_get_syscon(struct rk_pinctrl_softc *sc, uint32_t bank)
945 {
946 
947 	if (bank)
948 		return (sc->grf);
949 	else
950 		return (sc->pmu);
951 }
952 
953 static int
954 rk3568_parse_bias(phandle_t node, int bank)
955 {
956 
957 	if (OF_hasprop(node, "bias-disable"))
958 		return (0);
959 	if (OF_hasprop(node, "bias-pull-up"))
960 		return (1);
961 	if (OF_hasprop(node, "bias-pull-down"))
962 		return (2);
963 	return (-1);
964 }
965 
966 static int
967 rk3568_resolv_bias_value(int bank, int bias)
968 {
969 
970 	if (bias == 1)
971 		return (GPIO_PIN_PULLUP);
972 	if (bias == 2)
973 		return (GPIO_PIN_PULLDOWN);
974 	return (0);
975 }
976 
977 static int
978 rk3568_get_bias_value(int bank, int bias)
979 {
980 
981 	if (bias & GPIO_PIN_PULLUP)
982 		return (1);
983 	if (bias & GPIO_PIN_PULLDOWN)
984 		return (2);
985 	return (0);
986 }
987 
988 struct rk_pinctrl_conf rk3568_conf = {
989 	.iomux_conf = rk3568_iomux_bank,
990 	.iomux_nbanks = nitems(rk3568_iomux_bank),
991 	.pin_fixup = rk3568_pin_fixup,
992 	.npin_fixup = nitems(rk3568_pin_fixup),
993 	.pin_drive = rk3568_pin_drive,
994 	.npin_drive = nitems(rk3568_pin_drive),
995 	.gpio_bank = rk3568_gpio_bank,
996 	.ngpio_bank = nitems(rk3568_gpio_bank),
997 	.get_pd_offset = rk3568_get_pd_offset,
998 	.get_syscon = rk3568_get_syscon,
999 	.parse_bias = rk3568_parse_bias,
1000 	.resolv_bias_value = rk3568_resolv_bias_value,
1001 	.get_bias_value = rk3568_get_bias_value,
1002 };
1003 
1004 static struct ofw_compat_data compat_data[] = {
1005 	{"rockchip,rk3288-pinctrl", (uintptr_t)&rk3288_conf},
1006 	{"rockchip,rk3328-pinctrl", (uintptr_t)&rk3328_conf},
1007 	{"rockchip,rk3399-pinctrl", (uintptr_t)&rk3399_conf},
1008 	{"rockchip,rk3568-pinctrl", (uintptr_t)&rk3568_conf},
1009 	{NULL,             0}
1010 };
1011 
1012 static int
1013 rk_pinctrl_parse_drive(struct rk_pinctrl_softc *sc, phandle_t node,
1014   uint32_t bank, uint32_t subbank, uint32_t *drive, uint32_t *offset)
1015 {
1016 	uint32_t value;
1017 	int i;
1018 
1019 	if (OF_getencprop(node, "drive-strength", &value,
1020 	    sizeof(value)) != 0)
1021 		return (-1);
1022 
1023 	/* Map to the correct drive value */
1024 	for (i = 0; i < sc->conf->npin_drive; i++) {
1025 		if (sc->conf->pin_drive[i].bank != bank &&
1026 		    sc->conf->pin_drive[i].subbank != subbank)
1027 			continue;
1028 		if (sc->conf->pin_drive[i].ma == value) {
1029 			*drive = sc->conf->pin_drive[i].value;
1030 			return (0);
1031 		}
1032 	}
1033 
1034 	return (-1);
1035 }
1036 
1037 static void
1038 rk_pinctrl_get_fixup(struct rk_pinctrl_softc *sc, uint32_t bank, uint32_t pin,
1039     uint32_t *reg, uint32_t *mask, uint32_t *bit)
1040 {
1041 	int i;
1042 
1043 	for (i = 0; i < sc->conf->npin_fixup; i++)
1044 		if (sc->conf->pin_fixup[i].bank == bank &&
1045 		    sc->conf->pin_fixup[i].pin == pin) {
1046 			*reg = sc->conf->pin_fixup[i].reg;
1047 			*mask = sc->conf->pin_fixup[i].mask;
1048 			*bit = sc->conf->pin_fixup[i].bit;
1049 
1050 			return;
1051 		}
1052 }
1053 
1054 static int
1055 rk_pinctrl_handle_io(struct rk_pinctrl_softc *sc, phandle_t node, uint32_t bank,
1056 uint32_t pin)
1057 {
1058 	bool have_cfg, have_direction, have_value;
1059 	uint32_t  direction_value, pin_value;
1060 	struct rk_pinctrl_gpio *gpio;
1061 	int i, rv;
1062 
1063 	have_cfg = false;
1064 	have_direction = false;
1065 	have_value = false;
1066 
1067 	/* Get (subset of) GPIO pin properties. */
1068 	if (OF_hasprop(node, "output-disable")) {
1069 		have_cfg = true;
1070 		have_direction = true;
1071 		direction_value = GPIO_PIN_INPUT;
1072 	}
1073 
1074 	if (OF_hasprop(node, "output-enable")) {
1075 		have_cfg = true;
1076 		have_direction = true;
1077 		direction_value = GPIO_PIN_OUTPUT;
1078 	}
1079 
1080 	if (OF_hasprop(node, "output-low")) {
1081 		have_cfg = true;
1082 		have_direction = true;
1083 		direction_value = GPIO_PIN_OUTPUT;
1084 		have_value = true;
1085 		pin_value = 0;
1086 	}
1087 
1088 	if (OF_hasprop(node, "output-high")) {
1089 		have_cfg = true;
1090 		have_direction = true;
1091 		direction_value = GPIO_PIN_OUTPUT;
1092 		have_value = true;
1093 		pin_value = 1;
1094 	}
1095 
1096 	if (!have_cfg)
1097 		return (0);
1098 
1099 	/* Find gpio */
1100 	gpio = NULL;
1101 	for(i = 0; i < sc->conf->ngpio_bank; i++) {
1102 		if (bank ==  sc->conf->gpio_bank[i].bank) {
1103 			gpio = sc->conf->gpio_bank + i;
1104 			break;
1105 		}
1106 	}
1107 	if (gpio == NULL) {
1108 		device_printf(sc->dev, "Cannot find GPIO bank %d\n", bank);
1109 		return (ENXIO);
1110 	}
1111 	if (gpio->gpio_dev == NULL) {
1112 		device_printf(sc->dev,
1113 		    "No GPIO subdevice found for bank %d\n", bank);
1114 		return (ENXIO);
1115 	}
1116 
1117 	rv = 0;
1118 	if (have_value) {
1119 		rv = GPIO_PIN_SET(gpio->gpio_dev, pin, pin_value);
1120 		if (rv != 0) {
1121 			device_printf(sc->dev, "Cannot set GPIO value: %d\n",
1122 			    rv);
1123 			return (rv);
1124 		}
1125 	}
1126 
1127 	if (have_direction) {
1128 		rv = GPIO_PIN_SETFLAGS(gpio->gpio_dev, pin, direction_value);
1129 		if (rv != 0) {
1130 			device_printf(sc->dev,
1131 			    "Cannot set GPIO direction: %d\n", rv);
1132 			return (rv);
1133 		}
1134 	}
1135 
1136 	return (0);
1137 }
1138 
1139 static void
1140 rk_pinctrl_configure_pin(struct rk_pinctrl_softc *sc, uint32_t *pindata)
1141 {
1142 	phandle_t pin_conf;
1143 	struct syscon *syscon;
1144 	uint32_t bank, subbank, pin, function, bias;
1145 	uint32_t bit, mask, reg, drive;
1146 	int i, rv;
1147 
1148 	bank = pindata[0];
1149 	pin = pindata[1];
1150 	function = pindata[2];
1151 	pin_conf = OF_node_from_xref(pindata[3]);
1152 	subbank = pin / 8;
1153 
1154 	for (i = 0; i < sc->conf->iomux_nbanks; i++)
1155 		if (sc->conf->iomux_conf[i].bank == bank &&
1156 		    sc->conf->iomux_conf[i].subbank == subbank)
1157 			break;
1158 
1159 	if (i == sc->conf->iomux_nbanks) {
1160 		device_printf(sc->dev, "Unknown pin %d in bank %d\n", pin,
1161 		    bank);
1162 		return;
1163 	}
1164 
1165 	/* Find syscon */
1166 	syscon = sc->conf->get_syscon(sc, bank);
1167 
1168 	/* Setup GPIO properties first */
1169 	rv = rk_pinctrl_handle_io(sc, pin_conf, bank, pin);
1170 
1171 	/* Then pin pull-up/down */
1172 	bias = sc->conf->parse_bias(pin_conf, bank);
1173 	if (bias >= 0) {
1174 		reg = sc->conf->get_pd_offset(sc, bank);
1175 		reg += bank * 0x10 + ((pin / 8) * 0x4);
1176 		bit = (pin % 8) * 2;
1177 		mask = (0x3 << bit);
1178 		SYSCON_MODIFY_4(syscon, reg, mask, bias << bit | (mask << 16));
1179 	}
1180 
1181 	/* Then drive strength */
1182 	if (ofw_bus_node_is_compatible(ofw_bus_get_node(sc->dev),
1183 	    "rockchip,rk3568-pinctrl")) {
1184 		uint32_t value;
1185 		if (OF_getencprop(pin_conf, "drive-strength", &value,
1186 		    sizeof(value)) == 0) {
1187 			if (bank)
1188 				reg = 0x01c0 + (bank * 0x40) + (pin / 2 * 4);
1189 			else
1190 				reg = 0x0070 + (pin / 2 * 4);
1191 
1192 			drive = ((1 << (value + 1)) - 1) << (pin % 2);
1193 
1194 			mask = 0x3f << (pin % 2);;
1195 
1196 			SYSCON_WRITE_4(syscon, reg, drive | (mask << 16));
1197 		}
1198 	} else {
1199 		rv = rk_pinctrl_parse_drive(sc, pin_conf, bank, subbank, &drive,
1200 		    &reg);
1201 		if (rv == 0) {
1202 			bit = (pin % 8) * 2;
1203 			mask = (0x3 << bit);
1204 			SYSCON_MODIFY_4(syscon, reg, mask,
1205 			    drive << bit | (mask << 16));
1206 		}
1207 	}
1208 
1209 	/* Finally set the pin function */
1210 	reg = sc->conf->iomux_conf[i].offset;
1211 	switch (sc->conf->iomux_conf[i].nbits) {
1212 	case 4:
1213 		if ((pin % 8) >= 4)
1214 			reg += 0x4;
1215 		bit = (pin % 4) * 4;
1216 		mask = (0xF << bit);
1217 		break;
1218 	case 3:
1219 		if ((pin % 8) >= 5)
1220 			reg += 4;
1221 		bit = (pin % 8 % 5) * 3;
1222 		mask = (0x7 << bit);
1223 		break;
1224 	case 2:
1225 		bit = (pin % 8) * 2;
1226 		mask = (0x3 << bit);
1227 		break;
1228 	default:
1229 		device_printf(sc->dev,
1230 		    "Unknown pin stride width %d in bank %d\n",
1231 		    sc->conf->iomux_conf[i].nbits, bank);
1232 		return;
1233 	}
1234 	rk_pinctrl_get_fixup(sc, bank, pin, &reg, &mask, &bit);
1235 
1236 	/*
1237 	 * NOTE: not all syscon registers uses hi-word write mask, thus
1238 	 * register modify method should be used.
1239 	 * XXXX We should not pass write mask to syscon register
1240 	 * without hi-word write mask.
1241 	 */
1242 	SYSCON_MODIFY_4(syscon, reg, mask, function << bit | (mask << 16));
1243 
1244 	/* RK3568 specific pin mux for various functionalities */
1245 	if (ofw_bus_node_is_compatible(ofw_bus_get_node(sc->dev),
1246 	    "rockchip,rk3568-pinctrl")) {
1247 		if (bank == 3 && pin == 9 && function == 3)
1248 			SYSCON_WRITE_4(sc->grf,
1249 			    GRF_IOFUNC_SEL0, GMAC1_IOMUX_SEL_M0);
1250 		if (bank == 4 && pin == 7 && function == 3)
1251 			SYSCON_WRITE_4(sc->grf,
1252 			    GRF_IOFUNC_SEL0, GMAC1_IOMUX_SEL_M1);
1253 	}
1254 }
1255 
1256 static int
1257 rk_pinctrl_configure_pins(device_t dev, phandle_t cfgxref)
1258 {
1259 	struct rk_pinctrl_softc *sc;
1260 	phandle_t node;
1261 	uint32_t *pins;
1262 	int i, npins;
1263 
1264 	sc = device_get_softc(dev);
1265 	node = OF_node_from_xref(cfgxref);
1266 
1267 	npins = OF_getencprop_alloc_multi(node, "rockchip,pins",  sizeof(*pins),
1268 	    (void **)&pins);
1269 	if (npins <= 0)
1270 		return (ENOENT);
1271 
1272 	for (i = 0; i != npins; i += 4)
1273 		rk_pinctrl_configure_pin(sc, pins + i);
1274 
1275 	return (0);
1276 }
1277 
1278 static int
1279 rk_pinctrl_is_gpio_locked(struct rk_pinctrl_softc *sc, struct syscon *syscon,
1280   int bank, uint32_t pin, bool *is_gpio)
1281 {
1282 	uint32_t subbank, bit, mask, reg;
1283 	uint32_t pinfunc;
1284 	int i;
1285 
1286 	RK_PINCTRL_LOCK_ASSERT(sc);
1287 
1288 	subbank = pin / 8;
1289 	*is_gpio = false;
1290 
1291 	for (i = 0; i < sc->conf->iomux_nbanks; i++)
1292 		if (sc->conf->iomux_conf[i].bank == bank &&
1293 		    sc->conf->iomux_conf[i].subbank == subbank)
1294 			break;
1295 
1296 	if (i == sc->conf->iomux_nbanks) {
1297 		device_printf(sc->dev, "Unknown pin %d in bank %d\n", pin,
1298 		    bank);
1299 		return (EINVAL);
1300 	}
1301 
1302 	syscon = sc->conf->get_syscon(sc, bank);
1303 
1304 	/* Parse pin function */
1305 	reg = sc->conf->iomux_conf[i].offset;
1306 	switch (sc->conf->iomux_conf[i].nbits) {
1307 	case 4:
1308 		if ((pin % 8) >= 4)
1309 			reg += 0x4;
1310 		bit = (pin % 4) * 4;
1311 		mask = (0xF << bit);
1312 		break;
1313 	case 3:
1314 		if ((pin % 8) >= 5)
1315 			reg += 4;
1316 		bit = (pin % 8 % 5) * 3;
1317 		mask = (0x7 << bit);
1318 		break;
1319 	case 2:
1320 		bit = (pin % 8) * 2;
1321 		mask = (0x3 << bit);
1322 		break;
1323 	default:
1324 		device_printf(sc->dev,
1325 		    "Unknown pin stride width %d in bank %d\n",
1326 		    sc->conf->iomux_conf[i].nbits, bank);
1327 		return (EINVAL);
1328 	}
1329 	rk_pinctrl_get_fixup(sc, bank, pin, &reg, &mask, &bit);
1330 
1331 	reg = SYSCON_READ_4(syscon, reg);
1332 	pinfunc = (reg & mask) >> bit;
1333 
1334 	/* Test if the pin is in gpio mode */
1335 	if (pinfunc == 0)
1336 		*is_gpio = true;
1337 
1338 	return (0);
1339 }
1340 
1341 static int
1342 rk_pinctrl_get_bank(struct rk_pinctrl_softc *sc, device_t gpio, int *bank)
1343 {
1344 	int i;
1345 
1346 	for (i = 0; i < sc->conf->ngpio_bank; i++) {
1347 		if (sc->conf->gpio_bank[i].gpio_dev == gpio)
1348 			break;
1349 	}
1350 	if (i == sc->conf->ngpio_bank)
1351 		return (EINVAL);
1352 
1353 	*bank = i;
1354 	return (0);
1355 }
1356 
1357 static int
1358 rk_pinctrl_is_gpio(device_t pinctrl, device_t gpio, uint32_t pin, bool *is_gpio)
1359 {
1360 	struct rk_pinctrl_softc *sc;
1361 	struct syscon *syscon;
1362 	int bank;
1363 	int rv;
1364 
1365 	sc = device_get_softc(pinctrl);
1366 	RK_PINCTRL_LOCK(sc);
1367 
1368 	rv = rk_pinctrl_get_bank(sc, gpio, &bank);
1369 	if (rv != 0)
1370 		goto done;
1371 	syscon = sc->conf->get_syscon(sc, bank);
1372 	rv = rk_pinctrl_is_gpio_locked(sc, syscon, bank, pin, is_gpio);
1373 
1374 done:
1375 	RK_PINCTRL_UNLOCK(sc);
1376 
1377 	return (rv);
1378 }
1379 
1380 static int
1381 rk_pinctrl_get_flags(device_t pinctrl, device_t gpio, uint32_t pin,
1382     uint32_t *flags)
1383 {
1384 	struct rk_pinctrl_softc *sc;
1385 	struct syscon *syscon;
1386 	uint32_t reg, bit;
1387 	uint32_t bias;
1388 	int bank;
1389 	int rv = 0;
1390 	bool is_gpio;
1391 
1392 	sc = device_get_softc(pinctrl);
1393 	RK_PINCTRL_LOCK(sc);
1394 
1395 	rv = rk_pinctrl_get_bank(sc, gpio, &bank);
1396 	if (rv != 0)
1397 		goto done;
1398 	syscon = sc->conf->get_syscon(sc, bank);
1399 	rv = rk_pinctrl_is_gpio_locked(sc, syscon, bank, pin, &is_gpio);
1400 	if (rv != 0)
1401 		goto done;
1402 	if (!is_gpio) {
1403 		rv = EINVAL;
1404 		goto done;
1405 	}
1406 	/* Get the pullup/pulldown configuration */
1407 	reg = sc->conf->get_pd_offset(sc, bank);
1408 	reg += bank * 0x10 + ((pin / 8) * 0x4);
1409 	bit = (pin % 8) * 2;
1410 	reg = SYSCON_READ_4(syscon, reg);
1411 	reg = (reg >> bit) & 0x3;
1412 	bias = sc->conf->resolv_bias_value(bank, reg);
1413 	*flags = bias;
1414 
1415 done:
1416 	RK_PINCTRL_UNLOCK(sc);
1417 	return (rv);
1418 }
1419 
1420 static int
1421 rk_pinctrl_set_flags(device_t pinctrl, device_t gpio, uint32_t pin,
1422     uint32_t flags)
1423 {
1424 	struct rk_pinctrl_softc *sc;
1425 	struct syscon *syscon;
1426 	uint32_t bit, mask, reg;
1427 	uint32_t bias;
1428 	int bank;
1429 	int rv = 0;
1430 	bool is_gpio;
1431 
1432 	sc = device_get_softc(pinctrl);
1433 	RK_PINCTRL_LOCK(sc);
1434 
1435 	rv = rk_pinctrl_get_bank(sc, gpio, &bank);
1436 	if (rv != 0)
1437 		goto done;
1438 	syscon = sc->conf->get_syscon(sc, bank);
1439 	rv = rk_pinctrl_is_gpio_locked(sc, syscon, bank, pin, &is_gpio);
1440 	if (rv != 0)
1441 		goto done;
1442 	if (!is_gpio) {
1443 		rv = EINVAL;
1444 		goto done;
1445 	}
1446 	/* Get the pullup/pulldown configuration */
1447 	reg = sc->conf->get_pd_offset(sc, bank);
1448 	reg += bank * 0x10 + ((pin / 8) * 0x4);
1449 	bit = (pin % 8) * 2;
1450 	mask = (0x3 << bit);
1451 	bias = sc->conf->get_bias_value(bank, flags);
1452 	SYSCON_MODIFY_4(syscon, reg, mask, bias << bit | (mask << 16));
1453 
1454 done:
1455 	RK_PINCTRL_UNLOCK(sc);
1456 	return (rv);
1457 }
1458 
1459 static int
1460 rk_pinctrl_probe(device_t dev)
1461 {
1462 
1463 	if (!ofw_bus_status_okay(dev))
1464 		return (ENXIO);
1465 
1466 	if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
1467 		return (ENXIO);
1468 
1469 	device_set_desc(dev, "RockChip Pinctrl controller");
1470 	return (BUS_PROBE_DEFAULT);
1471 }
1472 
1473 static int
1474 rk_pinctrl_attach(device_t dev)
1475 {
1476 	struct rk_pinctrl_softc *sc;
1477 	phandle_t node;
1478 	device_t cdev;
1479 	int rv, gpio_unit;
1480 
1481 	sc = device_get_softc(dev);
1482 	sc->dev = dev;
1483 
1484 	node = ofw_bus_get_node(dev);
1485 
1486 	if (OF_hasprop(node, "rockchip,grf") &&
1487 	    syscon_get_by_ofw_property(dev, node,
1488 	    "rockchip,grf", &sc->grf) != 0) {
1489 		device_printf(dev, "cannot get grf driver handle\n");
1490 		return (ENXIO);
1491 	}
1492 
1493 	/* RK3568,RK3399,RK3288 have banks in PMU. RK3328 doesn't have a PMU. */
1494 	if (ofw_bus_node_is_compatible(node, "rockchip,rk3568-pinctrl") ||
1495 	    ofw_bus_node_is_compatible(node, "rockchip,rk3399-pinctrl") ||
1496 	    ofw_bus_node_is_compatible(node, "rockchip,rk3288-pinctrl")) {
1497 		if (OF_hasprop(node, "rockchip,pmu") &&
1498 		    syscon_get_by_ofw_property(dev, node,
1499 		    "rockchip,pmu", &sc->pmu) != 0) {
1500 			device_printf(dev, "cannot get pmu driver handle\n");
1501 			return (ENXIO);
1502 		}
1503 	}
1504 
1505 	mtx_init(&sc->mtx, "rk pinctrl", "pinctrl", MTX_SPIN);
1506 
1507 	sc->conf = (struct rk_pinctrl_conf *)ofw_bus_search_compatible(dev,
1508 	    compat_data)->ocd_data;
1509 
1510 	fdt_pinctrl_register(dev, "rockchip,pins");
1511 
1512 	simplebus_init(dev, node);
1513 
1514 	bus_generic_probe(dev);
1515 
1516 	/* Attach child devices */
1517 	for (node = OF_child(node), gpio_unit = 0; node > 0;
1518 	     node = OF_peer(node)) {
1519 		if (!ofw_bus_node_is_compatible(node, "rockchip,gpio-bank"))
1520 			continue;
1521 		cdev = simplebus_add_device(dev, node, 0, NULL, -1, NULL);
1522 		if (cdev == NULL) {
1523 			device_printf(dev, " Cannot add GPIO subdevice\n");
1524 			gpio_unit += 1;
1525 			continue;
1526 		}
1527 		rv = device_probe_and_attach(cdev);
1528 		if (rv != 0) {
1529 			device_printf(sc->dev,
1530 			    "Cannot attach GPIO subdevice\n");
1531 			gpio_unit += 1;
1532 			continue;
1533 		}
1534 		sc->conf->gpio_bank[gpio_unit].gpio_dev = cdev;
1535 		gpio_unit += 1;
1536 	}
1537 
1538 	fdt_pinctrl_configure_tree(dev);
1539 
1540 	return (bus_generic_attach(dev));
1541 }
1542 
1543 static int
1544 rk_pinctrl_detach(device_t dev)
1545 {
1546 
1547 	return (EBUSY);
1548 }
1549 
1550 static device_method_t rk_pinctrl_methods[] = {
1551 	/* Device interface */
1552 	DEVMETHOD(device_probe,			rk_pinctrl_probe),
1553 	DEVMETHOD(device_attach,		rk_pinctrl_attach),
1554 	DEVMETHOD(device_detach,		rk_pinctrl_detach),
1555 
1556         /* fdt_pinctrl interface */
1557 	DEVMETHOD(fdt_pinctrl_configure,	rk_pinctrl_configure_pins),
1558 	DEVMETHOD(fdt_pinctrl_is_gpio,		rk_pinctrl_is_gpio),
1559 	DEVMETHOD(fdt_pinctrl_get_flags,	rk_pinctrl_get_flags),
1560 	DEVMETHOD(fdt_pinctrl_set_flags,	rk_pinctrl_set_flags),
1561 
1562 	DEVMETHOD_END
1563 };
1564 
1565 DEFINE_CLASS_1(rk_pinctrl, rk_pinctrl_driver, rk_pinctrl_methods,
1566     sizeof(struct rk_pinctrl_softc), simplebus_driver);
1567 
1568 EARLY_DRIVER_MODULE(rk_pinctrl, simplebus, rk_pinctrl_driver, 0, 0,
1569     BUS_PASS_INTERRUPT + BUS_PASS_ORDER_MIDDLE);
1570 MODULE_VERSION(rk_pinctrl, 1);
1571