1 /*- 2 * Copyright (c) 2016 Rubicon Communications, LLC (Netgate) 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 */ 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 #include <sys/param.h> 31 #include <sys/systm.h> 32 #include <sys/bus.h> 33 34 #include <sys/kernel.h> 35 #include <sys/module.h> 36 #include <sys/rman.h> 37 #include <sys/lock.h> 38 #include <sys/mutex.h> 39 #include <sys/sysctl.h> 40 41 #include <machine/bus.h> 42 #include <machine/resource.h> 43 #include <machine/intr.h> 44 45 #include <dev/ofw/ofw_bus.h> 46 #include <dev/ofw/ofw_bus_subr.h> 47 48 #include <dev/spibus/spi.h> 49 #include <dev/spibus/spibusvar.h> 50 51 #include <arm/ti/ti_sysc.h> 52 #include <arm/ti/ti_spireg.h> 53 #include <arm/ti/ti_spivar.h> 54 55 #include "spibus_if.h" 56 57 static void ti_spi_intr(void *); 58 static int ti_spi_detach(device_t); 59 60 #undef TI_SPI_DEBUG 61 #ifdef TI_SPI_DEBUG 62 #define IRQSTATUSBITS \ 63 "\020\1TX0_EMPTY\2TX0_UNDERFLOW\3RX0_FULL\4RX0_OVERFLOW" \ 64 "\5TX1_EMPTY\6TX1_UNDERFLOW\7RX1_FULL\11TX2_EMPTY" \ 65 "\12TX1_UNDERFLOW\13RX2_FULL\15TX3_EMPTY\16TX3_UNDERFLOW" \ 66 "\17RX3_FULL\22EOW" 67 #define CONFBITS \ 68 "\020\1PHA\2POL\7EPOL\17DMAW\20DMAR\21DPE0\22DPE1\23IS" \ 69 "\24TURBO\25FORCE\30SBE\31SBPOL\34FFEW\35FFER\36CLKG" 70 #define STATBITS \ 71 "\020\1RXS\2TXS\3EOT\4TXFFE\5TXFFF\6RXFFE\7RXFFFF" 72 #define MODULCTRLBITS \ 73 "\020\1SINGLE\2NOSPIEN\3SLAVE\4SYST\10MOA\11FDAA" 74 #define CTRLBITS \ 75 "\020\1ENABLED" 76 77 static void 78 ti_spi_printr(device_t dev) 79 { 80 int clk, conf, ctrl, div, i, j, wl; 81 struct ti_spi_softc *sc; 82 uint32_t reg; 83 84 sc = device_get_softc(dev); 85 reg = TI_SPI_READ(sc, MCSPI_SYSCONFIG); 86 device_printf(dev, "SYSCONFIG: %#x\n", reg); 87 reg = TI_SPI_READ(sc, MCSPI_SYSSTATUS); 88 device_printf(dev, "SYSSTATUS: %#x\n", reg); 89 reg = TI_SPI_READ(sc, MCSPI_IRQSTATUS); 90 device_printf(dev, "IRQSTATUS: 0x%b\n", reg, IRQSTATUSBITS); 91 reg = TI_SPI_READ(sc, MCSPI_IRQENABLE); 92 device_printf(dev, "IRQENABLE: 0x%b\n", reg, IRQSTATUSBITS); 93 reg = TI_SPI_READ(sc, MCSPI_MODULCTRL); 94 device_printf(dev, "MODULCTRL: 0x%b\n", reg, MODULCTRLBITS); 95 for (i = 0; i < sc->sc_numcs; i++) { 96 ctrl = TI_SPI_READ(sc, MCSPI_CTRL_CH(i)); 97 conf = TI_SPI_READ(sc, MCSPI_CONF_CH(i)); 98 device_printf(dev, "CH%dCONF: 0x%b\n", i, conf, CONFBITS); 99 if (conf & MCSPI_CONF_CLKG) { 100 div = (conf >> MCSPI_CONF_CLK_SHIFT) & MCSPI_CONF_CLK_MSK; 101 div |= ((ctrl >> MCSPI_CTRL_EXTCLK_SHIFT) & MCSPI_CTRL_EXTCLK_MSK) << 4; 102 } else { 103 div = 1; 104 j = (conf >> MCSPI_CONF_CLK_SHIFT) & MCSPI_CONF_CLK_MSK; 105 while (j-- > 0) 106 div <<= 1; 107 } 108 clk = TI_SPI_GCLK / div; 109 wl = ((conf >> MCSPI_CONF_WL_SHIFT) & MCSPI_CONF_WL_MSK) + 1; 110 device_printf(dev, "wordlen: %-2d clock: %d\n", wl, clk); 111 reg = TI_SPI_READ(sc, MCSPI_STAT_CH(i)); 112 device_printf(dev, "CH%dSTAT: 0x%b\n", i, reg, STATBITS); 113 device_printf(dev, "CH%dCTRL: 0x%b\n", i, ctrl, CTRLBITS); 114 } 115 reg = TI_SPI_READ(sc, MCSPI_XFERLEVEL); 116 device_printf(dev, "XFERLEVEL: %#x\n", reg); 117 } 118 #endif 119 120 static void 121 ti_spi_set_clock(struct ti_spi_softc *sc, int ch, int freq) 122 { 123 uint32_t clkdiv, conf, div, extclk, reg; 124 125 clkdiv = TI_SPI_GCLK / freq; 126 if (clkdiv > MCSPI_EXTCLK_MSK) { 127 extclk = 0; 128 clkdiv = 0; 129 div = 1; 130 while (TI_SPI_GCLK / div > freq && clkdiv <= 0xf) { 131 clkdiv++; 132 div <<= 1; 133 } 134 conf = clkdiv << MCSPI_CONF_CLK_SHIFT; 135 } else { 136 extclk = clkdiv >> 4; 137 clkdiv &= MCSPI_CONF_CLK_MSK; 138 conf = MCSPI_CONF_CLKG | clkdiv << MCSPI_CONF_CLK_SHIFT; 139 } 140 141 reg = TI_SPI_READ(sc, MCSPI_CTRL_CH(ch)); 142 reg &= ~(MCSPI_CTRL_EXTCLK_MSK << MCSPI_CTRL_EXTCLK_SHIFT); 143 reg |= extclk << MCSPI_CTRL_EXTCLK_SHIFT; 144 TI_SPI_WRITE(sc, MCSPI_CTRL_CH(ch), reg); 145 146 reg = TI_SPI_READ(sc, MCSPI_CONF_CH(ch)); 147 reg &= ~(MCSPI_CONF_CLKG | MCSPI_CONF_CLK_MSK << MCSPI_CONF_CLK_SHIFT); 148 TI_SPI_WRITE(sc, MCSPI_CONF_CH(ch), reg | conf); 149 } 150 151 static int 152 ti_spi_probe(device_t dev) 153 { 154 155 if (!ofw_bus_status_okay(dev)) 156 return (ENXIO); 157 if (!ofw_bus_is_compatible(dev, "ti,omap4-mcspi")) 158 return (ENXIO); 159 160 device_set_desc(dev, "TI McSPI controller"); 161 162 return (BUS_PROBE_DEFAULT); 163 } 164 165 static int 166 ti_spi_attach(device_t dev) 167 { 168 int err, i, rid, timeout; 169 struct ti_spi_softc *sc; 170 uint32_t rev; 171 172 sc = device_get_softc(dev); 173 sc->sc_dev = dev; 174 175 /* Activate the McSPI module. */ 176 err = ti_sysc_clock_enable(device_get_parent(dev)); 177 if (err) { 178 device_printf(dev, "Error: failed to activate source clock\n"); 179 return (err); 180 } 181 182 /* Get the number of available channels. */ 183 if ((OF_getencprop(ofw_bus_get_node(dev), "ti,spi-num-cs", 184 &sc->sc_numcs, sizeof(sc->sc_numcs))) <= 0) { 185 sc->sc_numcs = 2; 186 } 187 188 rid = 0; 189 sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 190 RF_ACTIVE); 191 if (!sc->sc_mem_res) { 192 device_printf(dev, "cannot allocate memory window\n"); 193 return (ENXIO); 194 } 195 196 sc->sc_bst = rman_get_bustag(sc->sc_mem_res); 197 sc->sc_bsh = rman_get_bushandle(sc->sc_mem_res); 198 199 rid = 0; 200 sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 201 RF_ACTIVE); 202 if (!sc->sc_irq_res) { 203 bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res); 204 device_printf(dev, "cannot allocate interrupt\n"); 205 return (ENXIO); 206 } 207 208 /* Hook up our interrupt handler. */ 209 if (bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_MISC | INTR_MPSAFE, 210 NULL, ti_spi_intr, sc, &sc->sc_intrhand)) { 211 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sc_irq_res); 212 bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res); 213 device_printf(dev, "cannot setup the interrupt handler\n"); 214 return (ENXIO); 215 } 216 217 mtx_init(&sc->sc_mtx, "ti_spi", NULL, MTX_DEF); 218 219 /* Issue a softreset to the controller */ 220 TI_SPI_WRITE(sc, MCSPI_SYSCONFIG, MCSPI_SYSCONFIG_SOFTRESET); 221 timeout = 1000; 222 while (!(TI_SPI_READ(sc, MCSPI_SYSSTATUS) & 223 MCSPI_SYSSTATUS_RESETDONE)) { 224 if (--timeout == 0) { 225 device_printf(dev, 226 "Error: Controller reset operation timed out\n"); 227 ti_spi_detach(dev); 228 return (ENXIO); 229 } 230 DELAY(100); 231 } 232 233 /* Print the McSPI module revision. */ 234 rev = TI_SPI_READ(sc, 235 ti_sysc_get_rev_address_offset_host(device_get_parent(dev))); 236 device_printf(dev, 237 "scheme: %#x func: %#x rtl: %d rev: %d.%d custom rev: %d\n", 238 (rev >> MCSPI_REVISION_SCHEME_SHIFT) & MCSPI_REVISION_SCHEME_MSK, 239 (rev >> MCSPI_REVISION_FUNC_SHIFT) & MCSPI_REVISION_FUNC_MSK, 240 (rev >> MCSPI_REVISION_RTL_SHIFT) & MCSPI_REVISION_RTL_MSK, 241 (rev >> MCSPI_REVISION_MAJOR_SHIFT) & MCSPI_REVISION_MAJOR_MSK, 242 (rev >> MCSPI_REVISION_MINOR_SHIFT) & MCSPI_REVISION_MINOR_MSK, 243 (rev >> MCSPI_REVISION_CUSTOM_SHIFT) & MCSPI_REVISION_CUSTOM_MSK); 244 245 /* Set Master mode, single channel. */ 246 TI_SPI_WRITE(sc, MCSPI_MODULCTRL, MCSPI_MODULCTRL_SINGLE); 247 248 /* Clear pending interrupts and disable interrupts. */ 249 TI_SPI_WRITE(sc, MCSPI_IRQENABLE, 0x0); 250 TI_SPI_WRITE(sc, MCSPI_IRQSTATUS, 0xffff); 251 252 for (i = 0; i < sc->sc_numcs; i++) { 253 /* 254 * Default to SPI mode 0, CS active low, 8 bits word length and 255 * 500kHz clock. 256 */ 257 TI_SPI_WRITE(sc, MCSPI_CONF_CH(i), 258 MCSPI_CONF_DPE0 | MCSPI_CONF_EPOL | 259 (8 - 1) << MCSPI_CONF_WL_SHIFT); 260 /* Set initial clock - 500kHz. */ 261 ti_spi_set_clock(sc, i, 500000); 262 } 263 264 #ifdef TI_SPI_DEBUG 265 ti_spi_printr(dev); 266 #endif 267 268 device_add_child(dev, "spibus", -1); 269 270 return (bus_generic_attach(dev)); 271 } 272 273 static int 274 ti_spi_detach(device_t dev) 275 { 276 struct ti_spi_softc *sc; 277 278 sc = device_get_softc(dev); 279 280 /* Clear pending interrupts and disable interrupts. */ 281 TI_SPI_WRITE(sc, MCSPI_IRQENABLE, 0); 282 TI_SPI_WRITE(sc, MCSPI_IRQSTATUS, 0xffff); 283 284 /* Reset controller. */ 285 TI_SPI_WRITE(sc, MCSPI_SYSCONFIG, MCSPI_SYSCONFIG_SOFTRESET); 286 287 bus_generic_detach(dev); 288 289 mtx_destroy(&sc->sc_mtx); 290 if (sc->sc_intrhand) 291 bus_teardown_intr(dev, sc->sc_irq_res, sc->sc_intrhand); 292 if (sc->sc_irq_res) 293 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sc_irq_res); 294 if (sc->sc_mem_res) 295 bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res); 296 297 return (0); 298 } 299 300 static int 301 ti_spi_fill_fifo(struct ti_spi_softc *sc) 302 { 303 int bytes, timeout; 304 struct spi_command *cmd; 305 uint32_t written; 306 uint8_t *data; 307 308 cmd = sc->sc_cmd; 309 bytes = min(sc->sc_len - sc->sc_written, sc->sc_fifolvl); 310 while (bytes-- > 0) { 311 data = (uint8_t *)cmd->tx_cmd; 312 written = sc->sc_written++; 313 if (written >= cmd->tx_cmd_sz) { 314 data = (uint8_t *)cmd->tx_data; 315 written -= cmd->tx_cmd_sz; 316 } 317 if (sc->sc_fifolvl == 1) { 318 /* FIFO disabled. */ 319 timeout = 1000; 320 while (--timeout > 0 && (TI_SPI_READ(sc, 321 MCSPI_STAT_CH(sc->sc_cs)) & MCSPI_STAT_TXS) == 0) { 322 DELAY(100); 323 } 324 if (timeout == 0) 325 return (-1); 326 } 327 TI_SPI_WRITE(sc, MCSPI_TX_CH(sc->sc_cs), data[written]); 328 } 329 330 return (0); 331 } 332 333 static int 334 ti_spi_drain_fifo(struct ti_spi_softc *sc) 335 { 336 int bytes, timeout; 337 struct spi_command *cmd; 338 uint32_t read; 339 uint8_t *data; 340 341 cmd = sc->sc_cmd; 342 bytes = min(sc->sc_len - sc->sc_read, sc->sc_fifolvl); 343 while (bytes-- > 0) { 344 data = (uint8_t *)cmd->rx_cmd; 345 read = sc->sc_read++; 346 if (read >= cmd->rx_cmd_sz) { 347 data = (uint8_t *)cmd->rx_data; 348 read -= cmd->rx_cmd_sz; 349 } 350 if (sc->sc_fifolvl == 1) { 351 /* FIFO disabled. */ 352 timeout = 1000; 353 while (--timeout > 0 && (TI_SPI_READ(sc, 354 MCSPI_STAT_CH(sc->sc_cs)) & MCSPI_STAT_RXS) == 0) { 355 DELAY(100); 356 } 357 if (timeout == 0) 358 return (-1); 359 } 360 data[read] = TI_SPI_READ(sc, MCSPI_RX_CH(sc->sc_cs)); 361 } 362 363 return (0); 364 } 365 366 static void 367 ti_spi_intr(void *arg) 368 { 369 struct ti_spi_softc *sc; 370 uint32_t status; 371 372 sc = (struct ti_spi_softc *)arg; 373 TI_SPI_LOCK(sc); 374 status = TI_SPI_READ(sc, MCSPI_IRQSTATUS); 375 376 /* 377 * No new TX_empty or RX_full event will be asserted while the CPU has 378 * not performed the number of writes or reads defined by 379 * MCSPI_XFERLEVEL[AEL] and MCSPI_XFERLEVEL[AFL]. It is responsibility 380 * of CPU perform the right number of writes and reads. 381 */ 382 if (status & MCSPI_IRQ_TX0_EMPTY) 383 ti_spi_fill_fifo(sc); 384 if (status & MCSPI_IRQ_RX0_FULL) 385 ti_spi_drain_fifo(sc); 386 387 /* Clear interrupt status. */ 388 TI_SPI_WRITE(sc, MCSPI_IRQSTATUS, status); 389 390 /* Check for end of transfer. */ 391 if (sc->sc_written == sc->sc_len && sc->sc_read == sc->sc_len) { 392 sc->sc_flags |= TI_SPI_DONE; 393 wakeup(sc->sc_dev); 394 } 395 396 TI_SPI_UNLOCK(sc); 397 } 398 399 static int 400 ti_spi_pio_transfer(struct ti_spi_softc *sc) 401 { 402 403 while (sc->sc_len - sc->sc_written > 0) { 404 if (ti_spi_fill_fifo(sc) == -1) 405 return (EIO); 406 if (ti_spi_drain_fifo(sc) == -1) 407 return (EIO); 408 } 409 410 return (0); 411 } 412 413 static int 414 ti_spi_gcd(int a, int b) 415 { 416 int m; 417 418 while ((m = a % b) != 0) { 419 a = b; 420 b = m; 421 } 422 423 return (b); 424 } 425 426 static int 427 ti_spi_transfer(device_t dev, device_t child, struct spi_command *cmd) 428 { 429 int err; 430 struct ti_spi_softc *sc; 431 uint32_t clockhz, cs, mode, reg; 432 433 sc = device_get_softc(dev); 434 435 KASSERT(cmd->tx_cmd_sz == cmd->rx_cmd_sz, 436 ("TX/RX command sizes should be equal")); 437 KASSERT(cmd->tx_data_sz == cmd->rx_data_sz, 438 ("TX/RX data sizes should be equal")); 439 440 /* Get the proper chip select for this child. */ 441 spibus_get_cs(child, &cs); 442 spibus_get_clock(child, &clockhz); 443 spibus_get_mode(child, &mode); 444 445 cs &= ~SPIBUS_CS_HIGH; 446 447 if (cs > sc->sc_numcs) { 448 device_printf(dev, "Invalid chip select %d requested by %s\n", 449 cs, device_get_nameunit(child)); 450 return (EINVAL); 451 } 452 453 if (mode > 3) 454 { 455 device_printf(dev, "Invalid mode %d requested by %s\n", mode, 456 device_get_nameunit(child)); 457 return (EINVAL); 458 } 459 460 TI_SPI_LOCK(sc); 461 462 /* If the controller is in use wait until it is available. */ 463 while (sc->sc_flags & TI_SPI_BUSY) 464 mtx_sleep(dev, &sc->sc_mtx, 0, "ti_spi", 0); 465 466 /* Now we have control over SPI controller. */ 467 sc->sc_flags = TI_SPI_BUSY; 468 469 /* Save the SPI command data. */ 470 sc->sc_cs = cs; 471 sc->sc_cmd = cmd; 472 sc->sc_read = 0; 473 sc->sc_written = 0; 474 sc->sc_len = cmd->tx_cmd_sz + cmd->tx_data_sz; 475 sc->sc_fifolvl = ti_spi_gcd(sc->sc_len, TI_SPI_FIFOSZ); 476 if (sc->sc_fifolvl < 2 || sc->sc_len > 0xffff) 477 sc->sc_fifolvl = 1; /* FIFO disabled. */ 478 /* Disable FIFO for now. */ 479 sc->sc_fifolvl = 1; 480 481 /* Set the bus frequency. */ 482 ti_spi_set_clock(sc, sc->sc_cs, clockhz); 483 484 /* Disable the FIFO. */ 485 TI_SPI_WRITE(sc, MCSPI_XFERLEVEL, 0); 486 487 /* 8 bits word, d0 miso, d1 mosi, mode 0 and CS active low. */ 488 reg = TI_SPI_READ(sc, MCSPI_CONF_CH(sc->sc_cs)); 489 reg &= ~(MCSPI_CONF_FFER | MCSPI_CONF_FFEW | MCSPI_CONF_SBPOL | 490 MCSPI_CONF_SBE | MCSPI_CONF_TURBO | MCSPI_CONF_IS | 491 MCSPI_CONF_DPE1 | MCSPI_CONF_DPE0 | MCSPI_CONF_DMAR | 492 MCSPI_CONF_DMAW | MCSPI_CONF_EPOL); 493 reg |= MCSPI_CONF_DPE0 | MCSPI_CONF_EPOL | MCSPI_CONF_WL8BITS; 494 reg |= mode; /* POL and PHA are the low bits, we can just OR-in mode */ 495 TI_SPI_WRITE(sc, MCSPI_CONF_CH(sc->sc_cs), reg); 496 497 #if 0 498 /* Enable channel interrupts. */ 499 reg = TI_SPI_READ(sc, MCSPI_IRQENABLE); 500 reg |= 0xf; 501 TI_SPI_WRITE(sc, MCSPI_IRQENABLE, reg); 502 #endif 503 504 /* Start the transfer. */ 505 reg = TI_SPI_READ(sc, MCSPI_CTRL_CH(sc->sc_cs)); 506 TI_SPI_WRITE(sc, MCSPI_CTRL_CH(sc->sc_cs), reg | MCSPI_CTRL_ENABLE); 507 508 /* Force CS on. */ 509 reg = TI_SPI_READ(sc, MCSPI_CONF_CH(sc->sc_cs)); 510 TI_SPI_WRITE(sc, MCSPI_CONF_CH(sc->sc_cs), reg |= MCSPI_CONF_FORCE); 511 512 err = 0; 513 if (sc->sc_fifolvl == 1) 514 err = ti_spi_pio_transfer(sc); 515 516 /* Force CS off. */ 517 reg = TI_SPI_READ(sc, MCSPI_CONF_CH(sc->sc_cs)); 518 reg &= ~MCSPI_CONF_FORCE; 519 TI_SPI_WRITE(sc, MCSPI_CONF_CH(sc->sc_cs), reg); 520 521 /* Disable IRQs. */ 522 reg = TI_SPI_READ(sc, MCSPI_IRQENABLE); 523 reg &= ~0xf; 524 TI_SPI_WRITE(sc, MCSPI_IRQENABLE, reg); 525 TI_SPI_WRITE(sc, MCSPI_IRQSTATUS, 0xf); 526 527 /* Disable the SPI channel. */ 528 reg = TI_SPI_READ(sc, MCSPI_CTRL_CH(sc->sc_cs)); 529 reg &= ~MCSPI_CTRL_ENABLE; 530 TI_SPI_WRITE(sc, MCSPI_CTRL_CH(sc->sc_cs), reg); 531 532 /* Disable FIFO. */ 533 reg = TI_SPI_READ(sc, MCSPI_CONF_CH(sc->sc_cs)); 534 reg &= ~(MCSPI_CONF_FFER | MCSPI_CONF_FFEW); 535 TI_SPI_WRITE(sc, MCSPI_CONF_CH(sc->sc_cs), reg); 536 537 /* Release the controller and wakeup the next thread waiting for it. */ 538 sc->sc_flags = 0; 539 wakeup_one(dev); 540 TI_SPI_UNLOCK(sc); 541 542 return (err); 543 } 544 545 static phandle_t 546 ti_spi_get_node(device_t bus, device_t dev) 547 { 548 549 /* Share controller node with spibus. */ 550 return (ofw_bus_get_node(bus)); 551 } 552 553 static device_method_t ti_spi_methods[] = { 554 /* Device interface */ 555 DEVMETHOD(device_probe, ti_spi_probe), 556 DEVMETHOD(device_attach, ti_spi_attach), 557 DEVMETHOD(device_detach, ti_spi_detach), 558 559 /* SPI interface */ 560 DEVMETHOD(spibus_transfer, ti_spi_transfer), 561 562 /* ofw_bus interface */ 563 DEVMETHOD(ofw_bus_get_node, ti_spi_get_node), 564 565 DEVMETHOD_END 566 }; 567 568 static driver_t ti_spi_driver = { 569 "spi", 570 ti_spi_methods, 571 sizeof(struct ti_spi_softc), 572 }; 573 574 DRIVER_MODULE(ti_spi, simplebus, ti_spi_driver, 0, 0); 575 MODULE_DEPEND(ti_spi, ti_sysc, 1, 1, 1); 576