1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2018 Rubicon Communications, LLC (Netgate) 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 * 27 * $FreeBSD$ 28 */ 29 30 #include <sys/cdefs.h> 31 __FBSDID("$FreeBSD$"); 32 33 #include <sys/param.h> 34 #include <sys/systm.h> 35 #include <sys/bus.h> 36 37 #include <sys/kernel.h> 38 #include <sys/module.h> 39 #include <sys/rman.h> 40 #include <sys/lock.h> 41 #include <sys/mutex.h> 42 #include <sys/sysctl.h> 43 44 #include <machine/bus.h> 45 #include <machine/resource.h> 46 #include <machine/intr.h> 47 #include <dev/extres/syscon/syscon.h> 48 49 #include <dev/ofw/ofw_bus.h> 50 #include <dev/ofw/ofw_bus_subr.h> 51 52 #include "syscon_if.h" 53 54 #define CONTROL0 0 /* Offset in config->regs[] array */ 55 #define CONTROL0_TSEN_START (1 << 0) 56 #define CONTROL0_TSEN_RESET (1 << 1) 57 #define CONTROL0_TSEN_EN (1 << 2) 58 #define CONTROL0_CHANNEL_SHIFT 13 59 #define CONTROL0_CHANNEL_MASK 0xF 60 #define CONTROL0_OSR_SHIFT 24 61 #define CONTROL0_OSR_MAX 3 /* OSR = 512 * 4uS = ~2mS */ 62 #define CONTROL0_MODE_SHIFT 30 63 #define CONTROL0_MODE_EXTERNAL 0x2 64 #define CONTROL0_MODE_MASK 0x3 65 66 #define CONTROL1 1 /* Offset in config->regs[] array */ 67 /* This doesn't seems to work */ 68 #define CONTROL1_TSEN_SENS_SHIFT 21 69 #define CONTROL1_TSEN_SENS_MASK 0x7 70 71 #define STATUS 2 /* Offset in config->regs[] array */ 72 #define STATUS_TEMP_MASK 0x3FF 73 74 enum mv_thermal_type { 75 MV_AP806 = 1, 76 MV_CP110, 77 }; 78 79 struct mv_thermal_config { 80 enum mv_thermal_type type; 81 int regs[3]; 82 int ncpus; 83 int64_t calib_mul; 84 int64_t calib_add; 85 int64_t calib_div; 86 uint32_t valid_mask; 87 bool signed_value; 88 }; 89 90 struct mv_thermal_softc { 91 device_t dev; 92 struct syscon *syscon; 93 struct mtx mtx; 94 95 struct mv_thermal_config *config; 96 int cur_sensor; 97 }; 98 99 static struct mv_thermal_config mv_ap806_config = { 100 .type = MV_AP806, 101 .regs = {0x84, 0x88, 0x8C}, 102 .ncpus = 4, 103 .calib_mul = 423, 104 .calib_add = -150000, 105 .calib_div = 100, 106 .valid_mask = (1 << 16), 107 .signed_value = true, 108 }; 109 110 static struct mv_thermal_config mv_cp110_config = { 111 .type = MV_CP110, 112 .regs = {0x70, 0x74, 0x78}, 113 .calib_mul = 2000096, 114 .calib_add = 1172499100, 115 .calib_div = 420100, 116 .valid_mask = (1 << 10), 117 .signed_value = false, 118 }; 119 120 static struct ofw_compat_data compat_data[] = { 121 {"marvell,armada-ap806-thermal", (uintptr_t) &mv_ap806_config}, 122 {"marvell,armada-cp110-thermal", (uintptr_t) &mv_cp110_config}, 123 {NULL, 0} 124 }; 125 126 #define RD4(sc, reg) \ 127 SYSCON_READ_4((sc)->syscon, sc->config->regs[reg]) 128 #define WR4(sc, reg, val) \ 129 SYSCON_WRITE_4((sc)->syscon, sc->config->regs[reg], (val)) 130 131 static inline int32_t sign_extend(uint32_t value, int index) 132 { 133 uint8_t shift; 134 135 shift = 31 - index; 136 return ((int32_t)(value << shift) >> shift); 137 } 138 139 static int 140 mv_thermal_wait_sensor(struct mv_thermal_softc *sc) 141 { 142 uint32_t reg; 143 uint32_t timeout; 144 145 timeout = 100000; 146 while (--timeout > 0) { 147 reg = RD4(sc, STATUS); 148 if ((reg & sc->config->valid_mask) == sc->config->valid_mask) 149 break; 150 DELAY(100); 151 } 152 if (timeout == 0) { 153 return (ETIMEDOUT); 154 } 155 156 return (0); 157 } 158 159 static int 160 mv_thermal_select_sensor(struct mv_thermal_softc *sc, int sensor) 161 { 162 uint32_t reg; 163 164 if (sc->cur_sensor == sensor) 165 return (0); 166 167 /* Stop the current reading and reset the module */ 168 reg = RD4(sc, CONTROL0); 169 reg &= ~(CONTROL0_TSEN_START | CONTROL0_TSEN_EN); 170 WR4(sc, CONTROL0, reg); 171 172 /* Switch to the selected sensor */ 173 /* 174 * NOTE : Datasheet says to use CONTROL1 for selecting 175 * but when doing so the sensors >0 are never ready 176 * Do what Linux does using undocumented bits in CONTROL0 177 */ 178 /* This reset automatically to the sensor 0 */ 179 reg &= ~(CONTROL0_MODE_MASK << CONTROL0_MODE_SHIFT); 180 if (sensor) { 181 /* Select external sensor */ 182 reg |= CONTROL0_MODE_EXTERNAL << CONTROL0_MODE_SHIFT; 183 reg &= ~(CONTROL0_CHANNEL_MASK << CONTROL0_CHANNEL_SHIFT); 184 reg |= (sensor - 1) << CONTROL0_CHANNEL_SHIFT; 185 } 186 WR4(sc, CONTROL0, reg); 187 sc->cur_sensor = sensor; 188 189 /* Start the reading */ 190 reg = RD4(sc, CONTROL0); 191 reg |= CONTROL0_TSEN_START | CONTROL0_TSEN_EN; 192 WR4(sc, CONTROL0, reg); 193 194 return (mv_thermal_wait_sensor(sc)); 195 } 196 197 static int 198 mv_thermal_read_sensor(struct mv_thermal_softc *sc, int sensor, int *temp) 199 { 200 uint32_t reg; 201 int64_t sample, rv; 202 203 rv = mv_thermal_select_sensor(sc, sensor); 204 if (rv != 0) 205 return (rv); 206 207 reg = RD4(sc, STATUS) & STATUS_TEMP_MASK; 208 209 if (sc->config->signed_value) 210 sample = sign_extend(reg, fls(STATUS_TEMP_MASK) - 1); 211 else 212 sample = reg; 213 214 *temp = ((sample * sc->config->calib_mul) - sc->config->calib_add) / 215 sc->config->calib_div; 216 217 return (0); 218 } 219 220 static int 221 ap806_init(struct mv_thermal_softc *sc) 222 { 223 uint32_t reg; 224 225 /* Start the temp capture/conversion */ 226 reg = RD4(sc, CONTROL0); 227 reg &= ~CONTROL0_TSEN_RESET; 228 reg |= CONTROL0_TSEN_START | CONTROL0_TSEN_EN; 229 230 /* Sample every ~2ms */ 231 reg |= CONTROL0_OSR_MAX << CONTROL0_OSR_SHIFT; 232 233 WR4(sc, CONTROL0, reg); 234 235 /* Since we just started the module wait for the sensor to be ready */ 236 mv_thermal_wait_sensor(sc); 237 238 return (0); 239 } 240 241 static int 242 cp110_init(struct mv_thermal_softc *sc) 243 { 244 uint32_t reg; 245 246 reg = RD4(sc, CONTROL1); 247 reg &= (1 << 7); 248 reg |= (1 << 8); 249 WR4(sc, CONTROL1, reg); 250 251 /* Sample every ~2ms */ 252 reg = RD4(sc, CONTROL0); 253 reg |= CONTROL0_OSR_MAX << CONTROL0_OSR_SHIFT; 254 WR4(sc, CONTROL0, reg); 255 256 return (0); 257 } 258 259 static int 260 mv_thermal_sysctl(SYSCTL_HANDLER_ARGS) 261 { 262 struct mv_thermal_softc *sc; 263 device_t dev = arg1; 264 int sensor = arg2; 265 int val = 0; 266 267 sc = device_get_softc(dev); 268 mtx_lock(&(sc)->mtx); 269 270 if (mv_thermal_read_sensor(sc, sensor, &val) == 0) { 271 /* Convert to Kelvin */ 272 val = val + 2732; 273 } else { 274 device_printf(dev, "Timeout waiting for sensor\n"); 275 } 276 277 mtx_unlock(&(sc)->mtx); 278 return sysctl_handle_opaque(oidp, &val, sizeof(val), req); 279 } 280 281 static int 282 mv_thermal_probe(device_t dev) 283 { 284 285 if (!ofw_bus_status_okay(dev)) 286 return (ENXIO); 287 288 if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0) 289 return (ENXIO); 290 291 device_set_desc(dev, "Marvell Thermal Sensor Controller"); 292 return (BUS_PROBE_DEFAULT); 293 } 294 295 static int 296 mv_thermal_attach(device_t dev) 297 { 298 struct mv_thermal_softc *sc; 299 struct sysctl_ctx_list *ctx; 300 struct sysctl_oid_list *oid; 301 char name[255]; 302 char desc[255]; 303 int i; 304 305 sc = device_get_softc(dev); 306 sc->dev = dev; 307 308 sc->config = (struct mv_thermal_config *) 309 ofw_bus_search_compatible(dev, compat_data)->ocd_data; 310 311 mtx_init(&sc->mtx, device_get_nameunit(dev), NULL, MTX_DEF); 312 313 if (SYSCON_GET_HANDLE(sc->dev, &sc->syscon) != 0 || 314 sc->syscon == NULL) { 315 device_printf(dev, "cannot get syscon for device\n"); 316 return (ENXIO); 317 } 318 319 sc->cur_sensor = -1; 320 switch (sc->config->type) { 321 case MV_AP806: 322 ap806_init(sc); 323 break; 324 case MV_CP110: 325 cp110_init(sc); 326 break; 327 } 328 329 ctx = device_get_sysctl_ctx(dev); 330 oid = SYSCTL_CHILDREN(device_get_sysctl_tree(dev)); 331 /* There is always at least one sensor */ 332 SYSCTL_ADD_PROC(ctx, oid, OID_AUTO, "internal", 333 CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_NEEDGIANT, 334 dev, 0, mv_thermal_sysctl, 335 "IK", 336 "Internal Temperature"); 337 338 for (i = 0; i < sc->config->ncpus; i++) { 339 snprintf(name, sizeof(name), "cpu%d", i); 340 snprintf(desc, sizeof(desc), "CPU%d Temperature", i); 341 SYSCTL_ADD_PROC(ctx, oid, OID_AUTO, name, 342 CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_NEEDGIANT, 343 dev, i + 1, mv_thermal_sysctl, 344 "IK", 345 desc); 346 } 347 348 return (0); 349 } 350 351 static int 352 mv_thermal_detach(device_t dev) 353 { 354 return (0); 355 } 356 357 static device_method_t mv_thermal_methods[] = { 358 /* Device interface */ 359 DEVMETHOD(device_probe, mv_thermal_probe), 360 DEVMETHOD(device_attach, mv_thermal_attach), 361 DEVMETHOD(device_detach, mv_thermal_detach), 362 363 DEVMETHOD_END 364 }; 365 366 static driver_t mv_thermal_driver = { 367 "mv_thermal", 368 mv_thermal_methods, 369 sizeof(struct mv_thermal_softc), 370 }; 371 372 DRIVER_MODULE(mv_thermal, simplebus, mv_thermal_driver, 0, 0); 373