1 /*- 2 * Copyright (c) 2016 Jared McNeill <jmcneill@invisible.ca> 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 13 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 14 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 15 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 16 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 17 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 18 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 19 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 20 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 21 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 22 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 23 * SUCH DAMAGE. 24 */ 25 26 /* 27 * Allwinner thermal sensor controller 28 */ 29 30 #include <sys/param.h> 31 #include <sys/systm.h> 32 #include <sys/eventhandler.h> 33 #include <sys/bus.h> 34 #include <sys/rman.h> 35 #include <sys/kernel.h> 36 #include <sys/sysctl.h> 37 #include <sys/reboot.h> 38 #include <sys/module.h> 39 #include <sys/cpu.h> 40 #include <sys/taskqueue.h> 41 #include <machine/bus.h> 42 43 #include <dev/ofw/ofw_bus.h> 44 #include <dev/ofw/ofw_bus_subr.h> 45 46 #include <dev/extres/clk/clk.h> 47 #include <dev/extres/hwreset/hwreset.h> 48 #include <dev/extres/nvmem/nvmem.h> 49 50 #include <arm/allwinner/aw_sid.h> 51 52 #include "cpufreq_if.h" 53 #include "nvmem_if.h" 54 55 #define THS_CTRL0 0x00 56 #define THS_CTRL1 0x04 57 #define ADC_CALI_EN (1 << 17) 58 #define THS_CTRL2 0x40 59 #define SENSOR_ACQ1_SHIFT 16 60 #define SENSOR2_EN (1 << 2) 61 #define SENSOR1_EN (1 << 1) 62 #define SENSOR0_EN (1 << 0) 63 #define THS_INTC 0x44 64 #define THS_THERMAL_PER_SHIFT 12 65 #define THS_INTS 0x48 66 #define THS2_DATA_IRQ_STS (1 << 10) 67 #define THS1_DATA_IRQ_STS (1 << 9) 68 #define THS0_DATA_IRQ_STS (1 << 8) 69 #define SHUT_INT2_STS (1 << 6) 70 #define SHUT_INT1_STS (1 << 5) 71 #define SHUT_INT0_STS (1 << 4) 72 #define ALARM_INT2_STS (1 << 2) 73 #define ALARM_INT1_STS (1 << 1) 74 #define ALARM_INT0_STS (1 << 0) 75 #define THS_ALARM0_CTRL 0x50 76 #define ALARM_T_HOT_MASK 0xfff 77 #define ALARM_T_HOT_SHIFT 16 78 #define ALARM_T_HYST_MASK 0xfff 79 #define ALARM_T_HYST_SHIFT 0 80 #define THS_SHUTDOWN0_CTRL 0x60 81 #define SHUT_T_HOT_MASK 0xfff 82 #define SHUT_T_HOT_SHIFT 16 83 #define THS_FILTER 0x70 84 #define THS_CALIB0 0x74 85 #define THS_CALIB1 0x78 86 #define THS_DATA0 0x80 87 #define THS_DATA1 0x84 88 #define THS_DATA2 0x88 89 #define DATA_MASK 0xfff 90 91 #define A83T_CLK_RATE 24000000 92 #define A83T_ADC_ACQUIRE_TIME 23 /* 24Mhz/(23 + 1) = 1us */ 93 #define A83T_THERMAL_PER 1 /* 4096 * (1 + 1) / 24Mhz = 341 us */ 94 #define A83T_FILTER 0x5 /* Filter enabled, avg of 4 */ 95 #define A83T_TEMP_BASE 2719000 96 #define A83T_TEMP_MUL 1000 97 #define A83T_TEMP_DIV 14186 98 99 #define A64_CLK_RATE 4000000 100 #define A64_ADC_ACQUIRE_TIME 400 /* 4Mhz/(400 + 1) = 100 us */ 101 #define A64_THERMAL_PER 24 /* 4096 * (24 + 1) / 4Mhz = 25.6 ms */ 102 #define A64_FILTER 0x6 /* Filter enabled, avg of 8 */ 103 #define A64_TEMP_BASE 2170000 104 #define A64_TEMP_MUL 1000 105 #define A64_TEMP_DIV 8560 106 107 #define H3_CLK_RATE 4000000 108 #define H3_ADC_ACQUIRE_TIME 0x3f 109 #define H3_THERMAL_PER 401 110 #define H3_FILTER 0x6 /* Filter enabled, avg of 8 */ 111 #define H3_TEMP_BASE 217 112 #define H3_TEMP_MUL 1000 113 #define H3_TEMP_DIV 8253 114 #define H3_TEMP_MINUS 1794000 115 #define H3_INIT_ALARM 90 /* degC */ 116 #define H3_INIT_SHUT 105 /* degC */ 117 118 #define H5_CLK_RATE 24000000 119 #define H5_ADC_ACQUIRE_TIME 479 /* 24Mhz/479 = 20us */ 120 #define H5_THERMAL_PER 58 /* 4096 * (58 + 1) / 24Mhz = 10ms */ 121 #define H5_FILTER 0x6 /* Filter enabled, avg of 8 */ 122 #define H5_TEMP_BASE 233832448 123 #define H5_TEMP_MUL 124885 124 #define H5_TEMP_DIV 20 125 #define H5_TEMP_BASE_CPU 271581184 126 #define H5_TEMP_MUL_CPU 152253 127 #define H5_TEMP_BASE_GPU 289406976 128 #define H5_TEMP_MUL_GPU 166724 129 #define H5_INIT_CPU_ALARM 80 /* degC */ 130 #define H5_INIT_CPU_SHUT 96 /* degC */ 131 #define H5_INIT_GPU_ALARM 84 /* degC */ 132 #define H5_INIT_GPU_SHUT 100 /* degC */ 133 134 #define TEMP_C_TO_K 273 135 #define SENSOR_ENABLE_ALL (SENSOR0_EN|SENSOR1_EN|SENSOR2_EN) 136 #define SHUT_INT_ALL (SHUT_INT0_STS|SHUT_INT1_STS|SHUT_INT2_STS) 137 #define ALARM_INT_ALL (ALARM_INT0_STS) 138 139 #define MAX_SENSORS 3 140 #define MAX_CF_LEVELS 64 141 142 #define THROTTLE_ENABLE_DEFAULT 1 143 144 /* Enable thermal throttling */ 145 static int aw_thermal_throttle_enable = THROTTLE_ENABLE_DEFAULT; 146 TUNABLE_INT("hw.aw_thermal.throttle_enable", &aw_thermal_throttle_enable); 147 148 struct aw_thermal_sensor { 149 const char *name; 150 const char *desc; 151 int init_alarm; 152 int init_shut; 153 }; 154 155 struct aw_thermal_config { 156 struct aw_thermal_sensor sensors[MAX_SENSORS]; 157 int nsensors; 158 uint64_t clk_rate; 159 uint32_t adc_acquire_time; 160 int adc_cali_en; 161 uint32_t filter; 162 uint32_t thermal_per; 163 int (*to_temp)(uint32_t, int); 164 uint32_t (*to_reg)(int, int); 165 int temp_base; 166 int temp_mul; 167 int temp_div; 168 int calib0, calib1; 169 uint32_t calib0_mask, calib1_mask; 170 }; 171 172 static int 173 a83t_to_temp(uint32_t val, int sensor) 174 { 175 return ((A83T_TEMP_BASE - (val * A83T_TEMP_MUL)) / A83T_TEMP_DIV); 176 } 177 178 static const struct aw_thermal_config a83t_config = { 179 .nsensors = 3, 180 .sensors = { 181 [0] = { 182 .name = "cluster0", 183 .desc = "CPU cluster 0 temperature", 184 }, 185 [1] = { 186 .name = "cluster1", 187 .desc = "CPU cluster 1 temperature", 188 }, 189 [2] = { 190 .name = "gpu", 191 .desc = "GPU temperature", 192 }, 193 }, 194 .clk_rate = A83T_CLK_RATE, 195 .adc_acquire_time = A83T_ADC_ACQUIRE_TIME, 196 .adc_cali_en = 1, 197 .filter = A83T_FILTER, 198 .thermal_per = A83T_THERMAL_PER, 199 .to_temp = a83t_to_temp, 200 .calib0_mask = 0xffffffff, 201 .calib1_mask = 0xffff, 202 }; 203 204 static int 205 a64_to_temp(uint32_t val, int sensor) 206 { 207 return ((A64_TEMP_BASE - (val * A64_TEMP_MUL)) / A64_TEMP_DIV); 208 } 209 210 static const struct aw_thermal_config a64_config = { 211 .nsensors = 3, 212 .sensors = { 213 [0] = { 214 .name = "cpu", 215 .desc = "CPU temperature", 216 }, 217 [1] = { 218 .name = "gpu1", 219 .desc = "GPU temperature 1", 220 }, 221 [2] = { 222 .name = "gpu2", 223 .desc = "GPU temperature 2", 224 }, 225 }, 226 .clk_rate = A64_CLK_RATE, 227 .adc_acquire_time = A64_ADC_ACQUIRE_TIME, 228 .adc_cali_en = 1, 229 .filter = A64_FILTER, 230 .thermal_per = A64_THERMAL_PER, 231 .to_temp = a64_to_temp, 232 .calib0_mask = 0xffffffff, 233 .calib1_mask = 0xffff, 234 }; 235 236 static int 237 h3_to_temp(uint32_t val, int sensor) 238 { 239 return (H3_TEMP_BASE - ((val * H3_TEMP_MUL) / H3_TEMP_DIV)); 240 } 241 242 static uint32_t 243 h3_to_reg(int val, int sensor) 244 { 245 return ((H3_TEMP_MINUS - (val * H3_TEMP_DIV)) / H3_TEMP_MUL); 246 } 247 248 static const struct aw_thermal_config h3_config = { 249 .nsensors = 1, 250 .sensors = { 251 [0] = { 252 .name = "cpu", 253 .desc = "CPU temperature", 254 .init_alarm = H3_INIT_ALARM, 255 .init_shut = H3_INIT_SHUT, 256 }, 257 }, 258 .clk_rate = H3_CLK_RATE, 259 .adc_acquire_time = H3_ADC_ACQUIRE_TIME, 260 .adc_cali_en = 1, 261 .filter = H3_FILTER, 262 .thermal_per = H3_THERMAL_PER, 263 .to_temp = h3_to_temp, 264 .to_reg = h3_to_reg, 265 .calib0_mask = 0xffffffff, 266 }; 267 268 static int 269 h5_to_temp(uint32_t val, int sensor) 270 { 271 int tmp; 272 273 /* Temp is lower than 70 degrees */ 274 if (val > 0x500) { 275 tmp = H5_TEMP_BASE - (val * H5_TEMP_MUL); 276 tmp >>= H5_TEMP_DIV; 277 return (tmp); 278 } 279 280 if (sensor == 0) 281 tmp = H5_TEMP_BASE_CPU - (val * H5_TEMP_MUL_CPU); 282 else if (sensor == 1) 283 tmp = H5_TEMP_BASE_GPU - (val * H5_TEMP_MUL_GPU); 284 else { 285 printf("Unknown sensor %d\n", sensor); 286 return (val); 287 } 288 289 tmp >>= H5_TEMP_DIV; 290 return (tmp); 291 } 292 293 static uint32_t 294 h5_to_reg(int val, int sensor) 295 { 296 int tmp; 297 298 if (val < 70) { 299 tmp = H5_TEMP_BASE - (val << H5_TEMP_DIV); 300 tmp /= H5_TEMP_MUL; 301 } else { 302 if (sensor == 0) { 303 tmp = H5_TEMP_BASE_CPU - (val << H5_TEMP_DIV); 304 tmp /= H5_TEMP_MUL_CPU; 305 } else if (sensor == 1) { 306 tmp = H5_TEMP_BASE_GPU - (val << H5_TEMP_DIV); 307 tmp /= H5_TEMP_MUL_GPU; 308 } else { 309 printf("Unknown sensor %d\n", sensor); 310 return (val); 311 } 312 } 313 314 return ((uint32_t)tmp); 315 } 316 317 static const struct aw_thermal_config h5_config = { 318 .nsensors = 2, 319 .sensors = { 320 [0] = { 321 .name = "cpu", 322 .desc = "CPU temperature", 323 .init_alarm = H5_INIT_CPU_ALARM, 324 .init_shut = H5_INIT_CPU_SHUT, 325 }, 326 [1] = { 327 .name = "gpu", 328 .desc = "GPU temperature", 329 .init_alarm = H5_INIT_GPU_ALARM, 330 .init_shut = H5_INIT_GPU_SHUT, 331 }, 332 }, 333 .clk_rate = H5_CLK_RATE, 334 .adc_acquire_time = H5_ADC_ACQUIRE_TIME, 335 .filter = H5_FILTER, 336 .thermal_per = H5_THERMAL_PER, 337 .to_temp = h5_to_temp, 338 .to_reg = h5_to_reg, 339 .calib0_mask = 0xffffffff, 340 }; 341 342 static struct ofw_compat_data compat_data[] = { 343 { "allwinner,sun8i-a83t-ths", (uintptr_t)&a83t_config }, 344 { "allwinner,sun8i-h3-ths", (uintptr_t)&h3_config }, 345 { "allwinner,sun50i-a64-ths", (uintptr_t)&a64_config }, 346 { "allwinner,sun50i-h5-ths", (uintptr_t)&h5_config }, 347 { NULL, (uintptr_t)NULL } 348 }; 349 350 #define THS_CONF(d) \ 351 (void *)ofw_bus_search_compatible((d), compat_data)->ocd_data 352 353 struct aw_thermal_softc { 354 device_t dev; 355 struct resource *res[2]; 356 struct aw_thermal_config *conf; 357 358 struct task cf_task; 359 int throttle; 360 int min_freq; 361 struct cf_level levels[MAX_CF_LEVELS]; 362 eventhandler_tag cf_pre_tag; 363 364 clk_t clk_apb; 365 clk_t clk_ths; 366 }; 367 368 static struct resource_spec aw_thermal_spec[] = { 369 { SYS_RES_MEMORY, 0, RF_ACTIVE }, 370 { SYS_RES_IRQ, 0, RF_ACTIVE }, 371 { -1, 0 } 372 }; 373 374 #define RD4(sc, reg) bus_read_4((sc)->res[0], (reg)) 375 #define WR4(sc, reg, val) bus_write_4((sc)->res[0], (reg), (val)) 376 377 static int 378 aw_thermal_init(struct aw_thermal_softc *sc) 379 { 380 phandle_t node; 381 uint32_t calib[2]; 382 int error; 383 384 node = ofw_bus_get_node(sc->dev); 385 if (nvmem_get_cell_len(node, "calibration") > sizeof(calib)) { 386 device_printf(sc->dev, "calibration nvmem cell is too large\n"); 387 return (ENXIO); 388 } 389 error = nvmem_read_cell_by_name(node, "calibration", 390 (void *)&calib, nvmem_get_cell_len(node, "calibration")); 391 /* Read calibration settings from EFUSE */ 392 if (error != 0) { 393 device_printf(sc->dev, "Cannot read THS efuse\n"); 394 return (error); 395 } 396 397 calib[0] &= sc->conf->calib0_mask; 398 calib[1] &= sc->conf->calib1_mask; 399 400 /* Write calibration settings to thermal controller */ 401 if (calib[0] != 0) 402 WR4(sc, THS_CALIB0, calib[0]); 403 if (calib[1] != 0) 404 WR4(sc, THS_CALIB1, calib[1]); 405 406 /* Configure ADC acquire time (CLK_IN/(N+1)) and enable sensors */ 407 WR4(sc, THS_CTRL1, ADC_CALI_EN); 408 WR4(sc, THS_CTRL0, sc->conf->adc_acquire_time); 409 WR4(sc, THS_CTRL2, sc->conf->adc_acquire_time << SENSOR_ACQ1_SHIFT); 410 411 /* Set thermal period */ 412 WR4(sc, THS_INTC, sc->conf->thermal_per << THS_THERMAL_PER_SHIFT); 413 414 /* Enable average filter */ 415 WR4(sc, THS_FILTER, sc->conf->filter); 416 417 /* Enable interrupts */ 418 WR4(sc, THS_INTS, RD4(sc, THS_INTS)); 419 WR4(sc, THS_INTC, RD4(sc, THS_INTC) | SHUT_INT_ALL | ALARM_INT_ALL); 420 421 /* Enable sensors */ 422 WR4(sc, THS_CTRL2, RD4(sc, THS_CTRL2) | SENSOR_ENABLE_ALL); 423 424 return (0); 425 } 426 427 static int 428 aw_thermal_gettemp(struct aw_thermal_softc *sc, int sensor) 429 { 430 uint32_t val; 431 432 val = RD4(sc, THS_DATA0 + (sensor * 4)); 433 434 return (sc->conf->to_temp(val, sensor)); 435 } 436 437 static int 438 aw_thermal_getshut(struct aw_thermal_softc *sc, int sensor) 439 { 440 uint32_t val; 441 442 val = RD4(sc, THS_SHUTDOWN0_CTRL + (sensor * 4)); 443 val = (val >> SHUT_T_HOT_SHIFT) & SHUT_T_HOT_MASK; 444 445 return (sc->conf->to_temp(val, sensor)); 446 } 447 448 static void 449 aw_thermal_setshut(struct aw_thermal_softc *sc, int sensor, int temp) 450 { 451 uint32_t val; 452 453 val = RD4(sc, THS_SHUTDOWN0_CTRL + (sensor * 4)); 454 val &= ~(SHUT_T_HOT_MASK << SHUT_T_HOT_SHIFT); 455 val |= (sc->conf->to_reg(temp, sensor) << SHUT_T_HOT_SHIFT); 456 WR4(sc, THS_SHUTDOWN0_CTRL + (sensor * 4), val); 457 } 458 459 static int 460 aw_thermal_gethyst(struct aw_thermal_softc *sc, int sensor) 461 { 462 uint32_t val; 463 464 val = RD4(sc, THS_ALARM0_CTRL + (sensor * 4)); 465 val = (val >> ALARM_T_HYST_SHIFT) & ALARM_T_HYST_MASK; 466 467 return (sc->conf->to_temp(val, sensor)); 468 } 469 470 static int 471 aw_thermal_getalarm(struct aw_thermal_softc *sc, int sensor) 472 { 473 uint32_t val; 474 475 val = RD4(sc, THS_ALARM0_CTRL + (sensor * 4)); 476 val = (val >> ALARM_T_HOT_SHIFT) & ALARM_T_HOT_MASK; 477 478 return (sc->conf->to_temp(val, sensor)); 479 } 480 481 static void 482 aw_thermal_setalarm(struct aw_thermal_softc *sc, int sensor, int temp) 483 { 484 uint32_t val; 485 486 val = RD4(sc, THS_ALARM0_CTRL + (sensor * 4)); 487 val &= ~(ALARM_T_HOT_MASK << ALARM_T_HOT_SHIFT); 488 val |= (sc->conf->to_reg(temp, sensor) << ALARM_T_HOT_SHIFT); 489 WR4(sc, THS_ALARM0_CTRL + (sensor * 4), val); 490 } 491 492 static int 493 aw_thermal_sysctl(SYSCTL_HANDLER_ARGS) 494 { 495 struct aw_thermal_softc *sc; 496 int sensor, val; 497 498 sc = arg1; 499 sensor = arg2; 500 501 val = aw_thermal_gettemp(sc, sensor) + TEMP_C_TO_K; 502 503 return sysctl_handle_opaque(oidp, &val, sizeof(val), req); 504 } 505 506 static void 507 aw_thermal_throttle(struct aw_thermal_softc *sc, int enable) 508 { 509 device_t cf_dev; 510 int count, error; 511 512 if (enable == sc->throttle) 513 return; 514 515 if (enable != 0) { 516 /* Set the lowest available frequency */ 517 cf_dev = devclass_get_device(devclass_find("cpufreq"), 0); 518 if (cf_dev == NULL) 519 return; 520 count = MAX_CF_LEVELS; 521 error = CPUFREQ_LEVELS(cf_dev, sc->levels, &count); 522 if (error != 0 || count == 0) 523 return; 524 sc->min_freq = sc->levels[count - 1].total_set.freq; 525 error = CPUFREQ_SET(cf_dev, &sc->levels[count - 1], 526 CPUFREQ_PRIO_USER); 527 if (error != 0) 528 return; 529 } 530 531 sc->throttle = enable; 532 } 533 534 static void 535 aw_thermal_cf_task(void *arg, int pending) 536 { 537 struct aw_thermal_softc *sc; 538 539 sc = arg; 540 541 aw_thermal_throttle(sc, 1); 542 } 543 544 static void 545 aw_thermal_cf_pre_change(void *arg, const struct cf_level *level, int *status) 546 { 547 struct aw_thermal_softc *sc; 548 int temp_cur, temp_alarm; 549 550 sc = arg; 551 552 if (aw_thermal_throttle_enable == 0 || sc->throttle == 0 || 553 level->total_set.freq == sc->min_freq) 554 return; 555 556 temp_cur = aw_thermal_gettemp(sc, 0); 557 temp_alarm = aw_thermal_getalarm(sc, 0); 558 559 if (temp_cur < temp_alarm) 560 aw_thermal_throttle(sc, 0); 561 else 562 *status = ENXIO; 563 } 564 565 static void 566 aw_thermal_intr(void *arg) 567 { 568 struct aw_thermal_softc *sc; 569 device_t dev; 570 uint32_t ints; 571 572 dev = arg; 573 sc = device_get_softc(dev); 574 575 ints = RD4(sc, THS_INTS); 576 WR4(sc, THS_INTS, ints); 577 578 if ((ints & SHUT_INT_ALL) != 0) { 579 device_printf(dev, 580 "WARNING - current temperature exceeds safe limits\n"); 581 shutdown_nice(RB_POWEROFF); 582 } 583 584 if ((ints & ALARM_INT_ALL) != 0) 585 taskqueue_enqueue(taskqueue_thread, &sc->cf_task); 586 } 587 588 static int 589 aw_thermal_probe(device_t dev) 590 { 591 if (!ofw_bus_status_okay(dev)) 592 return (ENXIO); 593 594 if (THS_CONF(dev) == NULL) 595 return (ENXIO); 596 597 device_set_desc(dev, "Allwinner Thermal Sensor Controller"); 598 return (BUS_PROBE_DEFAULT); 599 } 600 601 static int 602 aw_thermal_attach(device_t dev) 603 { 604 struct aw_thermal_softc *sc; 605 hwreset_t rst; 606 int i, error; 607 void *ih; 608 609 sc = device_get_softc(dev); 610 sc->dev = dev; 611 rst = NULL; 612 ih = NULL; 613 614 sc->conf = THS_CONF(dev); 615 TASK_INIT(&sc->cf_task, 0, aw_thermal_cf_task, sc); 616 617 if (bus_alloc_resources(dev, aw_thermal_spec, sc->res) != 0) { 618 device_printf(dev, "cannot allocate resources for device\n"); 619 return (ENXIO); 620 } 621 622 if (clk_get_by_ofw_name(dev, 0, "bus", &sc->clk_apb) == 0) { 623 error = clk_enable(sc->clk_apb); 624 if (error != 0) { 625 device_printf(dev, "cannot enable apb clock\n"); 626 goto fail; 627 } 628 } 629 630 if (clk_get_by_ofw_name(dev, 0, "mod", &sc->clk_ths) == 0) { 631 error = clk_set_freq(sc->clk_ths, sc->conf->clk_rate, 0); 632 if (error != 0) { 633 device_printf(dev, "cannot set ths clock rate\n"); 634 goto fail; 635 } 636 error = clk_enable(sc->clk_ths); 637 if (error != 0) { 638 device_printf(dev, "cannot enable ths clock\n"); 639 goto fail; 640 } 641 } 642 643 if (hwreset_get_by_ofw_idx(dev, 0, 0, &rst) == 0) { 644 error = hwreset_deassert(rst); 645 if (error != 0) { 646 device_printf(dev, "cannot de-assert reset\n"); 647 goto fail; 648 } 649 } 650 651 error = bus_setup_intr(dev, sc->res[1], INTR_TYPE_MISC | INTR_MPSAFE, 652 NULL, aw_thermal_intr, dev, &ih); 653 if (error != 0) { 654 device_printf(dev, "cannot setup interrupt handler\n"); 655 goto fail; 656 } 657 658 for (i = 0; i < sc->conf->nsensors; i++) { 659 if (sc->conf->sensors[i].init_alarm > 0) 660 aw_thermal_setalarm(sc, i, 661 sc->conf->sensors[i].init_alarm); 662 if (sc->conf->sensors[i].init_shut > 0) 663 aw_thermal_setshut(sc, i, 664 sc->conf->sensors[i].init_shut); 665 } 666 667 if (aw_thermal_init(sc) != 0) 668 goto fail; 669 670 for (i = 0; i < sc->conf->nsensors; i++) 671 SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), 672 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), 673 OID_AUTO, sc->conf->sensors[i].name, 674 CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_NEEDGIANT, 675 sc, i, aw_thermal_sysctl, "IK0", 676 sc->conf->sensors[i].desc); 677 678 if (bootverbose) 679 for (i = 0; i < sc->conf->nsensors; i++) { 680 device_printf(dev, 681 "%s: alarm %dC hyst %dC shut %dC\n", 682 sc->conf->sensors[i].name, 683 aw_thermal_getalarm(sc, i), 684 aw_thermal_gethyst(sc, i), 685 aw_thermal_getshut(sc, i)); 686 } 687 688 sc->cf_pre_tag = EVENTHANDLER_REGISTER(cpufreq_pre_change, 689 aw_thermal_cf_pre_change, sc, EVENTHANDLER_PRI_FIRST); 690 691 return (0); 692 693 fail: 694 if (ih != NULL) 695 bus_teardown_intr(dev, sc->res[1], ih); 696 if (rst != NULL) 697 hwreset_release(rst); 698 if (sc->clk_apb != NULL) 699 clk_release(sc->clk_apb); 700 if (sc->clk_ths != NULL) 701 clk_release(sc->clk_ths); 702 bus_release_resources(dev, aw_thermal_spec, sc->res); 703 704 return (ENXIO); 705 } 706 707 static device_method_t aw_thermal_methods[] = { 708 /* Device interface */ 709 DEVMETHOD(device_probe, aw_thermal_probe), 710 DEVMETHOD(device_attach, aw_thermal_attach), 711 712 DEVMETHOD_END 713 }; 714 715 static driver_t aw_thermal_driver = { 716 "aw_thermal", 717 aw_thermal_methods, 718 sizeof(struct aw_thermal_softc), 719 }; 720 721 DRIVER_MODULE(aw_thermal, simplebus, aw_thermal_driver, 0, 0); 722 MODULE_VERSION(aw_thermal, 1); 723 MODULE_DEPEND(aw_thermal, aw_sid, 1, 1, 1); 724 SIMPLEBUS_PNP_INFO(compat_data); 725