1# $FreeBSD$ 2# 3# Option file for FreeBSD /usr/src builds, at least the userland and boot loader 4# portions of the tree. These options generally chose what parts of the tree to 5# include or omit and are FreeBSD source tree specific. 6# 7# Users define WITH_FOO and WITHOUT_FOO on the command line or in /etc/src.conf 8# and /etc/make.conf files. These translate in the build system to MK_FOO={yes,no} 9# with sensible (usually) defaults. 10# 11# Makefiles must include bsd.opts.mk after defining specific MK_FOO options that 12# are applicable for that Makefile (typically there are none, but sometimes there 13# are exceptions). Recursive makes usually add MK_FOO=no for options that they wish 14# to omit from that make. 15# 16# Makefiles must include bsd.mkopt.mk before they test the value of any MK_FOO 17# variable. 18# 19# Makefiles may also assume that this file is included by src.opts.mk should it 20# need variables defined there prior to the end of the Makefile where 21# bsd.{subdir,lib.bin}.mk is traditionally included. 22# 23# The old-style YES_FOO and NO_FOO are being phased out. No new instances of them 24# should be added. Old instances should be removed since they were just to 25# bridge the gap between FreeBSD 4 and FreeBSD 5. 26# 27# Makefiles should never test WITH_FOO or WITHOUT_FOO directly (although an 28# exception is made for _WITHOUT_SRCONF which turns off this mechanism 29# completely inside bsd.*.mk files). 30# 31 32.if !target(__<src.opts.mk>__) 33__<src.opts.mk>__: 34 35.include <bsd.own.mk> 36 37# 38# Define MK_* variables (which are either "yes" or "no") for users 39# to set via WITH_*/WITHOUT_* in /etc/src.conf and override in the 40# make(1) environment. 41# These should be tested with `== "no"' or `!= "no"' in makefiles. 42# The NO_* variables should only be set by makefiles for variables 43# that haven't been converted over. 44# 45 46# These options are used by the src builds. Those listed in 47# __DEFAULT_YES_OPTIONS default to 'yes' and will build unless turned 48# off. __DEFAULT_NO_OPTIONS will default to 'no' and won't build 49# unless turned on. Any options listed in 'BROKEN_OPTIONS' will be 50# hard-wired to 'no'. "Broken" here means not working or 51# not-appropriate and/or not supported. It doesn't imply something is 52# wrong with the code. There's not a single good word for this, so 53# BROKEN was selected as the least imperfect one considered at the 54# time. Options are added to BROKEN_OPTIONS list on a per-arch basis. 55# At this time, there's no provision for mutually incompatible options. 56 57__DEFAULT_YES_OPTIONS = \ 58 ACCT \ 59 ACPI \ 60 APM \ 61 AT \ 62 ATM \ 63 AUDIT \ 64 AUTHPF \ 65 AUTOFS \ 66 BHYVE \ 67 BLACKLIST \ 68 BLUETOOTH \ 69 BOOT \ 70 BOOTPARAMD \ 71 BOOTPD \ 72 BSD_CPIO \ 73 BSDINSTALL \ 74 BSNMP \ 75 BZIP2 \ 76 CALENDAR \ 77 CAPSICUM \ 78 CAROOT \ 79 CASPER \ 80 CCD \ 81 CDDL \ 82 CLANG \ 83 CLANG_BOOTSTRAP \ 84 CLEAN \ 85 CPP \ 86 CROSS_COMPILER \ 87 CRYPT \ 88 CUSE \ 89 CXGBETOOL \ 90 DIALOG \ 91 DICT \ 92 DMAGENT \ 93 DTRACE \ 94 DYNAMICROOT \ 95 EE \ 96 EFI \ 97 ELFTOOLCHAIN_BOOTSTRAP \ 98 EXAMPLES \ 99 FDT \ 100 FILE \ 101 FINGER \ 102 FLOPPY \ 103 FORTH \ 104 FP_LIBC \ 105 FREEBSD_UPDATE \ 106 FTP \ 107 GAMES \ 108 GH_BC \ 109 GNU_DIFF \ 110 GOOGLETEST \ 111 GPIO \ 112 HAST \ 113 HTML \ 114 HYPERV \ 115 ICONV \ 116 INET \ 117 INET6 \ 118 INETD \ 119 IPFILTER \ 120 IPFW \ 121 ISCSI \ 122 JAIL \ 123 KDUMP \ 124 KVM \ 125 LDNS \ 126 LDNS_UTILS \ 127 LEGACY_CONSOLE \ 128 LLD \ 129 LLD_BOOTSTRAP \ 130 LLD_IS_LD \ 131 LLVM_ASSERTIONS \ 132 LLVM_COV \ 133 LLVM_CXXFILT \ 134 LOADER_GELI \ 135 LOADER_KBOOT \ 136 LOADER_LUA \ 137 LOADER_OFW \ 138 LOADER_UBOOT \ 139 LOCALES \ 140 LOCATE \ 141 LPR \ 142 LS_COLORS \ 143 MACHDEP_OPTIMIZATIONS \ 144 MAIL \ 145 MAILWRAPPER \ 146 MAKE \ 147 MLX5TOOL \ 148 NDIS \ 149 NETCAT \ 150 NETGRAPH \ 151 NLS_CATALOGS \ 152 NS_CACHING \ 153 NTP \ 154 NVME \ 155 OFED \ 156 OPENSSL \ 157 PAM \ 158 PF \ 159 PKGBOOTSTRAP \ 160 PMC \ 161 PORTSNAP \ 162 PPP \ 163 QUOTAS \ 164 RADIUS_SUPPORT \ 165 RBOOTD \ 166 RESCUE \ 167 ROUTED \ 168 SENDMAIL \ 169 SERVICESDB \ 170 SETUID_LOGIN \ 171 SHARED_TOOLCHAIN \ 172 SHAREDOCS \ 173 SOURCELESS \ 174 SOURCELESS_HOST \ 175 SOURCELESS_UCODE \ 176 STATS \ 177 SYSCONS \ 178 SYSTEM_COMPILER \ 179 SYSTEM_LINKER \ 180 TALK \ 181 TCP_WRAPPERS \ 182 TCSH \ 183 TELNET \ 184 TEXTPROC \ 185 TFTP \ 186 UNBOUND \ 187 USB \ 188 UTMPX \ 189 VI \ 190 VT \ 191 WIRELESS \ 192 WPA_SUPPLICANT_EAPOL \ 193 ZFS \ 194 LOADER_ZFS \ 195 ZONEINFO 196 197__DEFAULT_NO_OPTIONS = \ 198 BEARSSL \ 199 BHYVE_SNAPSHOT \ 200 CLANG_EXTRAS \ 201 CLANG_FORMAT \ 202 DETECT_TZ_CHANGES \ 203 DTRACE_TESTS \ 204 EXPERIMENTAL \ 205 HESIOD \ 206 LOADER_VERBOSE \ 207 LOADER_VERIEXEC_PASS_MANIFEST \ 208 LLVM_BINUTILS \ 209 MALLOC_PRODUCTION \ 210 OFED_EXTRA \ 211 OPENLDAP \ 212 REPRODUCIBLE_BUILD \ 213 RPCBIND_WARMSTART_SUPPORT \ 214 SORT_THREADS \ 215 ZONEINFO_LEAPSECONDS_SUPPORT \ 216 217# LEFT/RIGHT. Left options which default to "yes" unless their corresponding 218# RIGHT option is disabled. 219__DEFAULT_DEPENDENT_OPTIONS= \ 220 CLANG_FULL/CLANG \ 221 LLVM_TARGET_ALL/CLANG \ 222 LOADER_VERIEXEC/BEARSSL \ 223 LOADER_EFI_SECUREBOOT/LOADER_VERIEXEC \ 224 LOADER_VERIEXEC_VECTX/LOADER_VERIEXEC \ 225 VERIEXEC/BEARSSL \ 226 227# MK_*_SUPPORT options which default to "yes" unless their corresponding 228# MK_* variable is set to "no". 229# 230.for var in \ 231 BLACKLIST \ 232 BZIP2 \ 233 INET \ 234 INET6 \ 235 KERBEROS \ 236 KVM \ 237 NETGRAPH \ 238 PAM \ 239 TESTS \ 240 WIRELESS 241__DEFAULT_DEPENDENT_OPTIONS+= ${var}_SUPPORT/${var} 242.endfor 243 244.-include <site.src.opts.mk> 245 246# 247# Default behaviour of some options depends on the architecture. Unfortunately 248# this means that we have to test TARGET_ARCH (the buildworld case) as well 249# as MACHINE_ARCH (the non-buildworld case). Normally TARGET_ARCH is not 250# used at all in bsd.*.mk, but we have to make an exception here if we want 251# to allow defaults for some things like clang to vary by target architecture. 252# Additional, per-target behavior should be rarely added only after much 253# gnashing of teeth and grinding of gears. 254# 255.if defined(TARGET_ARCH) 256__T=${TARGET_ARCH} 257.else 258__T=${MACHINE_ARCH} 259.endif 260 261# All supported backends for LLVM_TARGET_XXX 262__LLVM_TARGETS= \ 263 aarch64 \ 264 arm \ 265 powerpc \ 266 riscv \ 267 x86 268__LLVM_TARGET_FILT= C/(amd64|i386)/x86/:C/powerpc.*/powerpc/:C/armv[67]/arm/:C/riscv.*/riscv/:C/mips.*/mips/ 269.for __llt in ${__LLVM_TARGETS} 270# Default enable the given TARGET's LLVM_TARGET support 271.if ${__T:${__LLVM_TARGET_FILT}} == ${__llt} 272__DEFAULT_YES_OPTIONS+= LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu} 273# aarch64 needs arm for -m32 support. 274.elif ${__T} == "aarch64" && ${__llt:Marm*} != "" 275__DEFAULT_DEPENDENT_OPTIONS+= LLVM_TARGET_ARM/LLVM_TARGET_AARCH64 276# Default the rest of the LLVM_TARGETs to the value of MK_LLVM_TARGET_ALL. 277.else 278__DEFAULT_DEPENDENT_OPTIONS+= LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu}/LLVM_TARGET_ALL 279.endif 280.endfor 281 282__DEFAULT_NO_OPTIONS+=LLVM_TARGET_BPF LLVM_TARGET_MIPS 283 284.include <bsd.compiler.mk> 285 286.if ${__T:Marm*} == "" && ${__T:Mriscv64*} == "" 287__DEFAULT_YES_OPTIONS+=LLDB 288.else 289__DEFAULT_NO_OPTIONS+=LLDB 290.endif 291# LIB32 is supported on amd64 and powerpc64 292.if (${__T} == "amd64" || ${__T} == "powerpc64") 293__DEFAULT_YES_OPTIONS+=LIB32 294.else 295BROKEN_OPTIONS+=LIB32 296.endif 297# EFI doesn't exist on powerpc (well, officially) 298.if ${__T:Mpowerpc*} 299BROKEN_OPTIONS+=EFI 300.endif 301# OFW is only for powerpc, exclude others 302.if ${__T:Mpowerpc*} == "" 303BROKEN_OPTIONS+=LOADER_OFW 304.endif 305# KBOOT is only for powerpc64 (powerpc64le broken) amd64 and aarch64 306.if ${__T} != "powerpc64" && ${__T} != "amd64" && ${__T} != "aarch64" 307BROKEN_OPTIONS+=LOADER_KBOOT 308.endif 309# UBOOT is only for arm, and big-endian powerpc 310.if (${__T:Marm*} == "" && ${__T:Mpowerpc*} == "") || ${__T} == "powerpc64le" 311BROKEN_OPTIONS+=LOADER_UBOOT 312.endif 313# GELI and Lua in loader currently cause boot failures on powerpc. 314# Further debugging is required -- probably they are just broken on big 315# endian systems generically (they jump to null pointers or try to read 316# crazy high addresses, which is typical of endianness problems). 317.if ${__T:Mpowerpc*} 318BROKEN_OPTIONS+=LOADER_GELI LOADER_LUA 319.endif 320 321# Kernel TLS is enabled by default on amd64 and aarch64 322.if ${__T} == "aarch64" || ${__T} == "amd64" 323__DEFAULT_YES_OPTIONS+=OPENSSL_KTLS 324.else 325__DEFAULT_NO_OPTIONS+=OPENSSL_KTLS 326.endif 327 328.if ${__T} != "aarch64" && ${__T} != "amd64" && ${__T} != "i386" && \ 329 ${__T:Mpowerpc64*} == "" 330BROKEN_OPTIONS+=CXGBETOOL 331BROKEN_OPTIONS+=MLX5TOOL 332.endif 333 334.if ${__T} != "amd64" && ${__T} != "i386" && ${__T} != "aarch64" 335BROKEN_OPTIONS+=HYPERV 336.endif 337 338# NVME is only aarch64, x86 and powerpc64* 339.if ${__T} != "aarch64" && ${__T} != "amd64" && ${__T} != "i386" && \ 340 ${__T:Mpowerpc64*} == "" 341BROKEN_OPTIONS+=NVME 342.endif 343 344.if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T} == "i386" || \ 345 ${__T:Mpowerpc64*} != "" || ${__T:Mriscv64*} != "" 346__DEFAULT_YES_OPTIONS+=OPENMP 347.else 348__DEFAULT_NO_OPTIONS+=OPENMP 349.endif 350 351.include <bsd.mkopt.mk> 352 353# 354# Force some options off if their dependencies are off. 355# Order is somewhat important. 356# 357.if ${MK_CAPSICUM} == "no" 358MK_CASPER:= no 359.endif 360 361.if ${MK_SOURCELESS} == "no" 362MK_SOURCELESS_HOST:= no 363MK_SOURCELESS_UCODE:= no 364.endif 365 366.if ${MK_CDDL} == "no" 367MK_CTF:= no 368MK_DTRACE:= no 369MK_LOADER_ZFS:= no 370MK_ZFS:= no 371.endif 372 373.if ${MK_CRYPT} == "no" 374MK_OPENSSL:= no 375MK_OPENSSH:= no 376MK_KERBEROS:= no 377MK_KERBEROS_SUPPORT:= no 378.endif 379 380.if ${MK_DIALOG} == "no" 381MK_BSDINSTALL:= no 382.endif 383 384.if ${MK_DTRACE} == "no" 385MK_CTF:= no 386.endif 387 388.if ${MK_MAIL} == "no" 389MK_MAILWRAPPER:= no 390MK_SENDMAIL:= no 391MK_DMAGENT:= no 392.endif 393 394.if ${MK_NETGRAPH} == "no" 395MK_ATM:= no 396MK_BLUETOOTH:= no 397.endif 398 399.if ${MK_NLS} == "no" 400MK_NLS_CATALOGS:= no 401.endif 402 403.if ${MK_OPENSSL} == "no" 404MK_DMAGENT:= no 405MK_OPENSSH:= no 406MK_OPENSSL_KTLS:= no 407MK_KERBEROS:= no 408MK_KERBEROS_SUPPORT:= no 409MK_LDNS:= no 410MK_PKGBOOTSTRAP:= no 411MK_ZFS:= no 412.endif 413 414.if ${MK_LDNS} == "no" 415MK_LDNS_UTILS:= no 416MK_UNBOUND:= no 417.endif 418 419.if ${MK_PF} == "no" 420MK_AUTHPF:= no 421.endif 422 423.if ${MK_OFED} == "no" 424MK_OFED_EXTRA:= no 425.endif 426 427.if ${MK_TESTS} == "no" 428MK_DTRACE_TESTS:= no 429.endif 430 431.if ${MK_TESTS_SUPPORT} == "no" 432MK_GOOGLETEST:= no 433.endif 434 435.if ${MK_ZONEINFO} == "no" 436MK_ZONEINFO_LEAPSECONDS_SUPPORT:= no 437.endif 438 439.if ${MK_CROSS_COMPILER} == "no" 440MK_CLANG_BOOTSTRAP:= no 441MK_ELFTOOLCHAIN_BOOTSTRAP:= no 442MK_LLD_BOOTSTRAP:= no 443.endif 444 445.if ${MK_TOOLCHAIN} == "no" 446MK_CLANG:= no 447MK_INCLUDES:= no 448MK_LLD:= no 449MK_LLDB:= no 450MK_LLVM_BINUTILS:= no 451.endif 452 453.if ${MK_CLANG} == "no" 454MK_CLANG_EXTRAS:= no 455MK_CLANG_FORMAT:= no 456MK_CLANG_FULL:= no 457MK_LLVM_COV:= no 458.endif 459 460.if ${MK_ASAN} == "yes" 461# In order to get sensible backtraces from ASAN we have to install 462# llvm-symbolizer as /usr/bin/addr2line instead of the elftoolchain version. 463MK_LLVM_BINUTILS:= yes 464.endif 465 466.if ${MK_LLVM_BINUTILS} == "yes" 467# MK_LLVM_CXXFILT is a subset of MK_LLVM_BINUTILS and should therefore be 468# enabled if MK_LLVM_BINUTILS is set. 469MK_LLVM_CXXFILT:= yes 470.endif 471 472.if ${MK_LOADER_VERIEXEC} == "no" 473MK_LOADER_VERIEXEC_PASS_MANIFEST := no 474.endif 475 476# 477# MK_* options whose default value depends on another option. 478# 479.for vv in \ 480 GSSAPI/KERBEROS \ 481 MAN_UTILS/MAN 482.if defined(WITH_${vv:H}) 483MK_${vv:H}:= yes 484.elif defined(WITHOUT_${vv:H}) 485MK_${vv:H}:= no 486.else 487MK_${vv:H}:= ${MK_${vv:T}} 488.endif 489.endfor 490 491# 492# Set defaults for the MK_*_SUPPORT variables. 493# 494 495.endif # !target(__<src.opts.mk>__) 496