1# $FreeBSD$ 2# 3# Option file for FreeBSD /usr/src builds. 4# 5# Users define WITH_FOO and WITHOUT_FOO on the command line or in /etc/src.conf 6# and /etc/make.conf files. These translate in the build system to MK_FOO={yes,no} 7# with sensible (usually) defaults. 8# 9# Makefiles must include bsd.opts.mk after defining specific MK_FOO options that 10# are applicable for that Makefile (typically there are none, but sometimes there 11# are exceptions). Recursive makes usually add MK_FOO=no for options that they wish 12# to omit from that make. 13# 14# Makefiles must include bsd.mkopt.mk before they test the value of any MK_FOO 15# variable. 16# 17# Makefiles may also assume that this file is included by src.opts.mk should it 18# need variables defined there prior to the end of the Makefile where 19# bsd.{subdir,lib.bin}.mk is traditionally included. 20# 21# The old-style YES_FOO and NO_FOO are being phased out. No new instances of them 22# should be added. Old instances should be removed since they were just to 23# bridge the gap between FreeBSD 4 and FreeBSD 5. 24# 25# Makefiles should never test WITH_FOO or WITHOUT_FOO directly (although an 26# exception is made for _WITHOUT_SRCONF which turns off this mechanism 27# completely inside bsd.*.mk files). 28# 29 30.if !target(__<src.opts.mk>__) 31__<src.opts.mk>__: 32 33.include <bsd.own.mk> 34 35# 36# Define MK_* variables (which are either "yes" or "no") for users 37# to set via WITH_*/WITHOUT_* in /etc/src.conf and override in the 38# make(1) environment. 39# These should be tested with `== "no"' or `!= "no"' in makefiles. 40# The NO_* variables should only be set by makefiles for variables 41# that haven't been converted over. 42# 43 44# These options are used by the src builds. Those listed in 45# __DEFAULT_YES_OPTIONS default to 'yes' and will build unless turned 46# off. __DEFAULT_NO_OPTIONS will default to 'no' and won't build 47# unless turned on. Any options listed in 'BROKEN_OPTIONS' will be 48# hard-wired to 'no'. "Broken" here means not working or 49# not-appropriate and/or not supported. It doesn't imply something is 50# wrong with the code. There's not a single good word for this, so 51# BROKEN was selected as the least imperfect one considered at the 52# time. Options are added to BROKEN_OPTIONS list on a per-arch basis. 53# At this time, there's no provision for mutually incompatible options. 54 55__DEFAULT_YES_OPTIONS = \ 56 ACCT \ 57 ACPI \ 58 APM \ 59 AT \ 60 ATM \ 61 AUDIT \ 62 AUTHPF \ 63 AUTOFS \ 64 BHYVE \ 65 BLACKLIST \ 66 BLUETOOTH \ 67 BOOT \ 68 BOOTPARAMD \ 69 BOOTPD \ 70 BSD_CPIO \ 71 BSDINSTALL \ 72 BSNMP \ 73 BZIP2 \ 74 CALENDAR \ 75 CAPSICUM \ 76 CAROOT \ 77 CASPER \ 78 CCD \ 79 CDDL \ 80 CLANG \ 81 CLANG_BOOTSTRAP \ 82 CLANG_IS_CC \ 83 CLEAN \ 84 CPP \ 85 CROSS_COMPILER \ 86 CRYPT \ 87 CUSE \ 88 CXX \ 89 CXGBETOOL \ 90 DIALOG \ 91 DICT \ 92 DMAGENT \ 93 DYNAMICROOT \ 94 EE \ 95 EFI \ 96 ELFTOOLCHAIN_BOOTSTRAP \ 97 EXAMPLES \ 98 FDT \ 99 FILE \ 100 FINGER \ 101 FLOPPY \ 102 FORTH \ 103 FP_LIBC \ 104 FREEBSD_UPDATE \ 105 FTP \ 106 GAMES \ 107 GH_BC \ 108 GNU_DIFF \ 109 GOOGLETEST \ 110 GPIO \ 111 HAST \ 112 HTML \ 113 HYPERV \ 114 ICONV \ 115 INET \ 116 INET6 \ 117 INETD \ 118 IPFILTER \ 119 IPFW \ 120 ISCSI \ 121 JAIL \ 122 KDUMP \ 123 KVM \ 124 LDNS \ 125 LDNS_UTILS \ 126 LEGACY_CONSOLE \ 127 LLD \ 128 LLD_BOOTSTRAP \ 129 LLD_IS_LD \ 130 LLVM_ASSERTIONS \ 131 LLVM_COV \ 132 LLVM_CXXFILT \ 133 LOADER_GELI \ 134 LOADER_LUA \ 135 LOADER_OFW \ 136 LOADER_UBOOT \ 137 LOCALES \ 138 LOCATE \ 139 LPR \ 140 LS_COLORS \ 141 MAIL \ 142 MAILWRAPPER \ 143 MAKE \ 144 MLX5TOOL \ 145 NDIS \ 146 NETCAT \ 147 NETGRAPH \ 148 NLS_CATALOGS \ 149 NS_CACHING \ 150 NTP \ 151 NVME \ 152 OFED \ 153 OPENSSL \ 154 PAM \ 155 PF \ 156 PKGBOOTSTRAP \ 157 PMC \ 158 PORTSNAP \ 159 PPP \ 160 QUOTAS \ 161 RADIUS_SUPPORT \ 162 RBOOTD \ 163 RESCUE \ 164 ROUTED \ 165 SENDMAIL \ 166 SERVICESDB \ 167 SETUID_LOGIN \ 168 SHARED_TOOLCHAIN \ 169 SHAREDOCS \ 170 SOURCELESS \ 171 SOURCELESS_HOST \ 172 SOURCELESS_UCODE \ 173 STATS \ 174 SYSCONS \ 175 SYSTEM_COMPILER \ 176 SYSTEM_LINKER \ 177 TALK \ 178 TCP_WRAPPERS \ 179 TCSH \ 180 TELNET \ 181 TEXTPROC \ 182 TFTP \ 183 UNBOUND \ 184 USB \ 185 UTMPX \ 186 VI \ 187 VT \ 188 WIRELESS \ 189 WPA_SUPPLICANT_EAPOL \ 190 ZFS \ 191 LOADER_ZFS \ 192 ZONEINFO 193 194__DEFAULT_NO_OPTIONS = \ 195 BEARSSL \ 196 BHYVE_SNAPSHOT \ 197 CLANG_EXTRAS \ 198 CLANG_FORMAT \ 199 DETECT_TZ_CHANGES \ 200 DTRACE_TESTS \ 201 EXPERIMENTAL \ 202 HESIOD \ 203 LIBSOFT \ 204 LOADER_FIREWIRE \ 205 LOADER_VERBOSE \ 206 LOADER_VERIEXEC_PASS_MANIFEST \ 207 LLVM_BINUTILS \ 208 MALLOC_PRODUCTION \ 209 OFED_EXTRA \ 210 OPENLDAP \ 211 REPRODUCIBLE_BUILD \ 212 RPCBIND_WARMSTART_SUPPORT \ 213 SORT_THREADS \ 214 ZONEINFO_LEAPSECONDS_SUPPORT \ 215 216# LEFT/RIGHT. Left options which default to "yes" unless their corresponding 217# RIGHT option is disabled. 218__DEFAULT_DEPENDENT_OPTIONS= \ 219 CLANG_FULL/CLANG \ 220 LLVM_TARGET_ALL/CLANG \ 221 LOADER_VERIEXEC/BEARSSL \ 222 LOADER_EFI_SECUREBOOT/LOADER_VERIEXEC \ 223 LOADER_VERIEXEC_VECTX/LOADER_VERIEXEC \ 224 VERIEXEC/BEARSSL \ 225 226# MK_*_SUPPORT options which default to "yes" unless their corresponding 227# MK_* variable is set to "no". 228# 229.for var in \ 230 BLACKLIST \ 231 BZIP2 \ 232 INET \ 233 INET6 \ 234 KERBEROS \ 235 KVM \ 236 NETGRAPH \ 237 PAM \ 238 TESTS \ 239 WIRELESS 240__DEFAULT_DEPENDENT_OPTIONS+= ${var}_SUPPORT/${var} 241.endfor 242 243# 244# Default behaviour of some options depends on the architecture. Unfortunately 245# this means that we have to test TARGET_ARCH (the buildworld case) as well 246# as MACHINE_ARCH (the non-buildworld case). Normally TARGET_ARCH is not 247# used at all in bsd.*.mk, but we have to make an exception here if we want 248# to allow defaults for some things like clang to vary by target architecture. 249# Additional, per-target behavior should be rarely added only after much 250# gnashing of teeth and grinding of gears. 251# 252.if defined(TARGET_ARCH) 253__T=${TARGET_ARCH} 254.else 255__T=${MACHINE_ARCH} 256.endif 257 258# All supported backends for LLVM_TARGET_XXX 259__LLVM_TARGETS= \ 260 aarch64 \ 261 arm \ 262 mips \ 263 powerpc \ 264 riscv \ 265 x86 266__LLVM_TARGET_FILT= C/(amd64|i386)/x86/:C/powerpc.*/powerpc/:C/armv[67]/arm/:C/riscv.*/riscv/:C/mips.*/mips/ 267.for __llt in ${__LLVM_TARGETS} 268# Default enable the given TARGET's LLVM_TARGET support 269.if ${__T:${__LLVM_TARGET_FILT}} == ${__llt} 270__DEFAULT_YES_OPTIONS+= LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu} 271# aarch64 needs arm for -m32 support. 272.elif ${__T} == "aarch64" && ${__llt:Marm*} != "" 273__DEFAULT_DEPENDENT_OPTIONS+= LLVM_TARGET_ARM/LLVM_TARGET_AARCH64 274# Default the rest of the LLVM_TARGETs to the value of MK_LLVM_TARGET_ALL. 275.else 276__DEFAULT_DEPENDENT_OPTIONS+= LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu}/LLVM_TARGET_ALL 277.endif 278.endfor 279 280__DEFAULT_NO_OPTIONS+=LLVM_TARGET_BPF 281 282.include <bsd.compiler.mk> 283 284.if ${__T:Mriscv*} != "" 285BROKEN_OPTIONS+=OFED 286.endif 287.if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T} == "i386" 288__DEFAULT_YES_OPTIONS+=LLDB 289.else 290__DEFAULT_NO_OPTIONS+=LLDB 291.endif 292# LIB32 is supported on amd64, mips64, and powerpc64 293.if (${__T} == "amd64" || ${__T:Mmips64*} || ${__T} == "powerpc64") 294__DEFAULT_YES_OPTIONS+=LIB32 295.else 296BROKEN_OPTIONS+=LIB32 297.endif 298# Only doing soft float API stuff on armv6 and armv7 299.if ${__T} != "armv6" && ${__T} != "armv7" 300BROKEN_OPTIONS+=LIBSOFT 301.endif 302.if ${__T:Mmips*} 303# GOOGLETEST cannot currently be compiled on mips due to external circumstances. 304# Notably, the freebsd-gcc port isn't linking in libgcc so we end up trying ot 305# link to a hidden symbol. LLVM would successfully link this in, but some of 306# the mips variants are broken under LLVM until LLVM 10. GOOGLETEST should be 307# marked no longer broken with the switch to LLVM. 308BROKEN_OPTIONS+=GOOGLETEST SSP 309.endif 310# EFI doesn't exist on mips or powerpc. 311.if ${__T:Mmips*} || ${__T:Mpowerpc*} 312BROKEN_OPTIONS+=EFI 313.endif 314# OFW is only for powerpc, exclude others 315.if ${__T:Mpowerpc*} == "" 316BROKEN_OPTIONS+=LOADER_OFW 317.endif 318# UBOOT is only for arm, mips and powerpc, exclude others 319.if ${__T:Marm*} == "" && ${__T:Mmips*} == "" && ${__T:Mpowerpc*} == "" 320BROKEN_OPTIONS+=LOADER_UBOOT 321.endif 322# GELI and Lua in loader currently cause boot failures on powerpc. 323# Further debugging is required -- probably they are just broken on big 324# endian systems generically (they jump to null pointers or try to read 325# crazy high addresses, which is typical of endianness problems). 326.if ${__T:Mpowerpc*} 327BROKEN_OPTIONS+=LOADER_GELI LOADER_LUA 328.endif 329 330# Kernel TLS is enabled by default on amd64 and aarch64 331.if ${__T} == "aarch64" || ${__T} == "amd64" 332__DEFAULT_YES_OPTIONS+=OPENSSL_KTLS 333.else 334__DEFAULT_NO_OPTIONS+=OPENSSL_KTLS 335.endif 336 337.if ${__T:Mmips64*} 338# profiling won't work on MIPS64 because there is only assembly for o32 339BROKEN_OPTIONS+=PROFILE 340.endif 341.if ${__T} != "aarch64" && ${__T} != "amd64" && ${__T} != "i386" && \ 342 ${__T} != "powerpc64" 343BROKEN_OPTIONS+=CXGBETOOL 344BROKEN_OPTIONS+=MLX5TOOL 345.endif 346 347# HyperV is currently x86-only 348.if ${__T} != "amd64" && ${__T} != "i386" 349BROKEN_OPTIONS+=HYPERV 350.endif 351 352# NVME is only aarch64, x86 and powerpc64* 353.if ${__T} != "aarch64" && ${__T} != "amd64" && ${__T} != "i386" && \ 354 ${__T:Mpowerpc64*} == "" 355BROKEN_OPTIONS+=NVME 356.endif 357 358.if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T} == "i386" || \ 359 ${__T:Mpowerpc64*} != "" || ${__T:Mriscv64*} != "" 360__DEFAULT_YES_OPTIONS+=OPENMP 361.else 362__DEFAULT_NO_OPTIONS+=OPENMP 363.endif 364 365.include <bsd.mkopt.mk> 366 367# 368# Force some options off if their dependencies are off. 369# Order is somewhat important. 370# 371.if ${MK_CAPSICUM} == "no" 372MK_CASPER:= no 373.endif 374 375.if ${MK_SOURCELESS} == "no" 376MK_SOURCELESS_HOST:= no 377MK_SOURCELESS_UCODE:= no 378.endif 379 380.if ${MK_CDDL} == "no" 381MK_ZFS:= no 382MK_LOADER_ZFS:= no 383MK_CTF:= no 384.endif 385 386.if ${MK_CRYPT} == "no" 387MK_OPENSSL:= no 388MK_OPENSSH:= no 389MK_KERBEROS:= no 390MK_KERBEROS_SUPPORT:= no 391.endif 392 393.if ${MK_CXX} == "no" 394MK_CLANG:= no 395MK_GOOGLETEST:= no 396MK_OFED:= no 397MK_OPENMP:= no 398MK_PMC:= no 399MK_TESTS:= no 400.endif 401 402.if ${MK_DIALOG} == "no" 403MK_BSDINSTALL:= no 404.endif 405 406.if ${MK_MAIL} == "no" 407MK_MAILWRAPPER:= no 408MK_SENDMAIL:= no 409MK_DMAGENT:= no 410.endif 411 412.if ${MK_NETGRAPH} == "no" 413MK_ATM:= no 414MK_BLUETOOTH:= no 415.endif 416 417.if ${MK_NLS} == "no" 418MK_NLS_CATALOGS:= no 419.endif 420 421.if ${MK_OPENSSL} == "no" 422MK_DMAGENT:= no 423MK_OPENSSH:= no 424MK_OPENSSL_KTLS:= no 425MK_KERBEROS:= no 426MK_KERBEROS_SUPPORT:= no 427MK_LDNS:= no 428MK_PKGBOOTSTRAP:= no 429MK_ZFS:= no 430.endif 431 432.if ${MK_LDNS} == "no" 433MK_LDNS_UTILS:= no 434MK_UNBOUND:= no 435.endif 436 437.if ${MK_PF} == "no" 438MK_AUTHPF:= no 439.endif 440 441.if ${MK_OFED} == "no" 442MK_OFED_EXTRA:= no 443.endif 444 445.if ${MK_TESTS} == "no" 446MK_DTRACE_TESTS:= no 447.endif 448 449.if ${MK_TESTS_SUPPORT} == "no" 450MK_GOOGLETEST:= no 451.endif 452 453.if ${MK_ZONEINFO} == "no" 454MK_ZONEINFO_LEAPSECONDS_SUPPORT:= no 455.endif 456 457.if ${MK_CROSS_COMPILER} == "no" 458MK_CLANG_BOOTSTRAP:= no 459MK_ELFTOOLCHAIN_BOOTSTRAP:= no 460MK_LLD_BOOTSTRAP:= no 461.endif 462 463.if ${MK_TOOLCHAIN} == "no" 464MK_CLANG:= no 465MK_INCLUDES:= no 466MK_LLD:= no 467MK_LLDB:= no 468MK_LLVM_BINUTILS:= no 469.endif 470 471.if ${MK_CLANG} == "no" 472MK_CLANG_EXTRAS:= no 473MK_CLANG_FORMAT:= no 474MK_CLANG_FULL:= no 475MK_LLVM_COV:= no 476.endif 477 478.if ${MK_ASAN} == "yes" 479# In order to get sensible backtraces from ASAN we have to install 480# llvm-symbolizer as /usr/bin/addr2line instead of the elftoolchain version. 481MK_LLVM_BINUTILS:= yes 482.endif 483 484.if ${MK_LLVM_BINUTILS} == "yes" 485# MK_LLVM_CXXFILT is a subset of MK_LLVM_BINUTILS and should therefore be 486# enabled if MK_LLVM_BINUTILS is set. 487MK_LLVM_CXXFILT:= yes 488.endif 489 490.if ${MK_LOADER_VERIEXEC} == "no" 491MK_LOADER_VERIEXEC_PASS_MANIFEST := no 492.endif 493 494# 495# MK_* options whose default value depends on another option. 496# 497.for vv in \ 498 GSSAPI/KERBEROS \ 499 MAN_UTILS/MAN 500.if defined(WITH_${vv:H}) 501MK_${vv:H}:= yes 502.elif defined(WITHOUT_${vv:H}) 503MK_${vv:H}:= no 504.else 505MK_${vv:H}:= ${MK_${vv:T}} 506.endif 507.endfor 508 509# 510# Set defaults for the MK_*_SUPPORT variables. 511# 512 513.endif # !target(__<src.opts.mk>__) 514