1.\" $OpenBSD: pf.conf.5,v 1.406 2009/01/31 19:37:12 sobrado Exp $ 2.\" 3.\" Copyright (c) 2002, Daniel Hartmeier 4.\" All rights reserved. 5.\" 6.\" Redistribution and use in source and binary forms, with or without 7.\" modification, are permitted provided that the following conditions 8.\" are met: 9.\" 10.\" - Redistributions of source code must retain the above copyright 11.\" notice, this list of conditions and the following disclaimer. 12.\" - Redistributions in binary form must reproduce the above 13.\" copyright notice, this list of conditions and the following 14.\" disclaimer in the documentation and/or other materials provided 15.\" with the distribution. 16.\" 17.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 18.\" "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 19.\" LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 20.\" FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 21.\" COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 22.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 23.\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 24.\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 25.\" CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 27.\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28.\" POSSIBILITY OF SUCH DAMAGE. 29.\" 30.Dd June 6, 2024 31.Dt PF.CONF 5 32.Os 33.Sh NAME 34.Nm pf.conf 35.Nd packet filter configuration file 36.Sh DESCRIPTION 37The 38.Xr pf 4 39packet filter modifies, drops or passes packets according to rules or 40definitions specified in 41.Nm pf.conf . 42.Sh STATEMENT ORDER 43There are eight types of statements in 44.Nm pf.conf : 45.Bl -tag -width xxxx 46.It Cm Macros 47User-defined variables may be defined and used later, simplifying 48the configuration file. 49Macros must be defined before they are referenced in 50.Nm pf.conf . 51.It Cm Tables 52Tables provide a mechanism for increasing the performance and flexibility of 53rules with large numbers of source or destination addresses. 54.It Cm Options 55Options tune the behaviour of the packet filtering engine. 56.It Cm Ethernet Filtering 57Ethernet filtering provides rule-based blocking or passing of Ethernet packets. 58.It Cm Traffic Normalization Li (e.g. Em scrub ) 59Traffic normalization protects internal machines against inconsistencies 60in Internet protocols and implementations. 61.It Cm Queueing 62Queueing provides rule-based bandwidth control. 63.It Cm Translation Li (Various forms of NAT) 64Translation rules specify how addresses are to be mapped or redirected to 65other addresses. 66.It Cm Packet Filtering 67Packet filtering provides rule-based blocking or passing of packets. 68.El 69.Pp 70With the exception of 71.Cm macros 72and 73.Cm tables , 74the types of statements should be grouped and appear in 75.Nm pf.conf 76in the order shown above, as this matches the operation of the underlying 77packet filtering engine. 78By default 79.Xr pfctl 8 80enforces this order (see 81.Ar set require-order 82below). 83.Pp 84Comments can be put anywhere in the file using a hash mark 85.Pq Sq # , 86and extend to the end of the current line. 87.Pp 88Additional configuration files can be included with the 89.Ic include 90keyword, for example: 91.Bd -literal -offset indent 92include "/etc/pf/sub.filter.conf" 93.Ed 94.Sh MACROS 95Macros can be defined that will later be expanded in context. 96Macro names must start with a letter, and may contain letters, digits 97and underscores. 98Macro names may not be reserved words (for example 99.Ar pass , 100.Ar in , 101.Ar out ) . 102Macros are not expanded inside quotes. 103.Pp 104For example, 105.Bd -literal -offset indent 106ext_if = \&"kue0\&" 107all_ifs = \&"{\&" $ext_if lo0 \&"}\&" 108pass out on $ext_if from any to any 109pass in on $ext_if proto tcp from any to any port 25 110.Ed 111.Sh TABLES 112Tables are named structures which can hold a collection of addresses and 113networks. 114Lookups against tables in 115.Xr pf 4 116are relatively fast, making a single rule with tables much more efficient, 117in terms of 118processor usage and memory consumption, than a large number of rules which 119differ only in IP address (either created explicitly or automatically by rule 120expansion). 121.Pp 122Tables can be used as the source or destination of filter rules, 123.Ar scrub 124rules 125or 126translation rules such as 127.Ar nat 128or 129.Ar rdr 130(see below for details on the various rule types). 131Tables can also be used for the redirect address of 132.Ar nat 133and 134.Ar rdr 135rules and in the routing options of filter rules, but only for 136.Ar round-robin 137pools. 138.Pp 139Tables can be defined with any of the following 140.Xr pfctl 8 141mechanisms. 142As with macros, reserved words may not be used as table names. 143.Bl -tag -width "manually" 144.It Ar manually 145Persistent tables can be manually created with the 146.Ar add 147or 148.Ar replace 149option of 150.Xr pfctl 8 , 151before or after the ruleset has been loaded. 152.It Pa pf.conf 153Table definitions can be placed directly in this file, and loaded at the 154same time as other rules are loaded, atomically. 155Table definitions inside 156.Nm pf.conf 157use the 158.Ar table 159statement, and are especially useful to define non-persistent tables. 160The contents of a pre-existing table defined without a list of addresses 161to initialize it is not altered when 162.Nm pf.conf 163is loaded. 164A table initialized with the empty list, 165.Li { } , 166will be cleared on load. 167.El 168.Pp 169Tables may be defined with the following attributes: 170.Bl -tag -width persist 171.It Ar persist 172The 173.Ar persist 174flag forces the kernel to keep the table even when no rules refer to it. 175If the flag is not set, the kernel will automatically remove the table 176when the last rule referring to it is flushed. 177.It Ar const 178The 179.Ar const 180flag prevents the user from altering the contents of the table once it 181has been created. 182Without that flag, 183.Xr pfctl 8 184can be used to add or remove addresses from the table at any time, even 185when running with 186.Xr securelevel 7 187= 2. 188.It Ar counters 189The 190.Ar counters 191flag enables per-address packet and byte counters which can be displayed with 192.Xr pfctl 8 . 193Note that this feature carries significant memory overhead for large tables. 194.El 195.Pp 196For example, 197.Bd -literal -offset indent 198table \*(Ltprivate\*(Gt const { 10/8, 172.16/12, 192.168/16 } 199table \*(Ltbadhosts\*(Gt persist 200block on fxp0 from { \*(Ltprivate\*(Gt, \*(Ltbadhosts\*(Gt } to any 201.Ed 202.Pp 203creates a table called private, to hold RFC 1918 private network 204blocks, and a table called badhosts, which is initially empty. 205A filter rule is set up to block all traffic coming from addresses listed in 206either table. 207The private table cannot have its contents changed and the badhosts table 208will exist even when no active filter rules reference it. 209Addresses may later be added to the badhosts table, so that traffic from 210these hosts can be blocked by using 211.Bd -literal -offset indent 212# pfctl -t badhosts -Tadd 204.92.77.111 213.Ed 214.Pp 215A table can also be initialized with an address list specified in one or more 216external files, using the following syntax: 217.Bd -literal -offset indent 218table \*(Ltspam\*(Gt persist file \&"/etc/spammers\&" file \&"/etc/openrelays\&" 219block on fxp0 from \*(Ltspam\*(Gt to any 220.Ed 221.Pp 222The files 223.Pa /etc/spammers 224and 225.Pa /etc/openrelays 226list IP addresses, one per line. 227Any lines beginning with a # are treated as comments and ignored. 228In addition to being specified by IP address, hosts may also be 229specified by their hostname. 230When the resolver is called to add a hostname to a table, 231.Em all 232resulting IPv4 and IPv6 addresses are placed into the table. 233IP addresses can also be entered in a table by specifying a valid interface 234name, a valid interface group or the 235.Em self 236keyword, in which case all addresses assigned to the interface(s) will be 237added to the table. 238.Sh OPTIONS 239.Xr pf 4 240may be tuned for various situations using the 241.Ar set 242command. 243.Bl -tag -width xxxx 244.It Ar set timeout 245.Pp 246.Bl -tag -width "src.track" -compact 247.It Ar interval 248Interval between purging expired states and fragments. 249.It Ar frag 250Seconds before an unassembled fragment is expired. 251.It Ar src.track 252Length of time to retain a source tracking entry after the last state 253expires. 254.El 255.Pp 256When a packet matches a stateful connection, the seconds to live for the 257connection will be updated to that of the 258.Ar proto.modifier 259which corresponds to the connection state. 260Each packet which matches this state will reset the TTL. 261Tuning these values may improve the performance of the 262firewall at the risk of dropping valid idle connections. 263.Pp 264.Bl -tag -width xxxx -compact 265.It Ar tcp.first 266The state after the first packet. 267.It Ar tcp.opening 268The state before the destination host ever sends a packet. 269.It Ar tcp.established 270The fully established state. 271.It Ar tcp.closing 272The state after the first FIN has been sent. 273.It Ar tcp.finwait 274The state after both FINs have been exchanged and the connection is closed. 275Some hosts (notably web servers on Solaris) send TCP packets even after closing 276the connection. 277Increasing 278.Ar tcp.finwait 279(and possibly 280.Ar tcp.closing ) 281can prevent blocking of such packets. 282.It Ar tcp.closed 283The state after one endpoint sends an RST. 284.El 285.Pp 286SCTP timeout are handled similar to TCP, but with its own set of states: 287.Pp 288.Bl -tag -width xxxx -compact 289.It Ar sctp.first 290The state after the first packet. 291.It Ar sctp.opening 292The state before the destination host ever sends a packet. 293.It Ar sctp.established 294The fully established state. 295.It Ar sctp.closing 296The state after the first SHUTDOWN chunk has been sent. 297.It Ar sctp.closed 298The state after SHUTDOWN_ACK has been exchanged and the connection is closed. 299.El 300.Pp 301ICMP and UDP are handled in a fashion similar to TCP, but with a much more 302limited set of states: 303.Pp 304.Bl -tag -width xxxx -compact 305.It Ar udp.first 306The state after the first packet. 307.It Ar udp.single 308The state if the source host sends more than one packet but the destination 309host has never sent one back. 310.It Ar udp.multiple 311The state if both hosts have sent packets. 312.It Ar icmp.first 313The state after the first packet. 314.It Ar icmp.error 315The state after an ICMP error came back in response to an ICMP packet. 316.El 317.Pp 318Other protocols are handled similarly to UDP: 319.Pp 320.Bl -tag -width xxxx -compact 321.It Ar other.first 322.It Ar other.single 323.It Ar other.multiple 324.El 325.Pp 326Timeout values can be reduced adaptively as the number of state table 327entries grows. 328.Pp 329.Bl -tag -width xxxx -compact 330.It Ar adaptive.start 331When the number of state entries exceeds this value, adaptive scaling 332begins. 333All timeout values are scaled linearly with factor 334(adaptive.end - number of states) / (adaptive.end - adaptive.start). 335.It Ar adaptive.end 336When reaching this number of state entries, all timeout values become 337zero, effectively purging all state entries immediately. 338This value is used to define the scale factor, it should not actually 339be reached (set a lower state limit, see below). 340.El 341.Pp 342Adaptive timeouts are enabled by default, with an adaptive.start value 343equal to 60% of the state limit, and an adaptive.end value equal to 344120% of the state limit. 345They can be disabled by setting both adaptive.start and adaptive.end to 0. 346.Pp 347The adaptive timeout values can be defined both globally and for each rule. 348When used on a per-rule basis, the values relate to the number of 349states created by the rule, otherwise to the total number of 350states. 351.Pp 352For example: 353.Bd -literal -offset indent 354set timeout tcp.first 120 355set timeout tcp.established 86400 356set timeout { adaptive.start 6000, adaptive.end 12000 } 357set limit states 10000 358.Ed 359.Pp 360With 9000 state table entries, the timeout values are scaled to 50% 361(tcp.first 60, tcp.established 43200). 362.It Ar set loginterface 363Enable collection of packet and byte count statistics for the given 364interface or interface group. 365These statistics can be viewed using 366.Bd -literal -offset indent 367# pfctl -s info 368.Ed 369.Pp 370In this example 371.Xr pf 4 372collects statistics on the interface named dc0: 373.Bd -literal -offset indent 374set loginterface dc0 375.Ed 376.Pp 377One can disable the loginterface using: 378.Bd -literal -offset indent 379set loginterface none 380.Ed 381.It Ar set limit 382Sets hard limits on the memory pools used by the packet filter. 383See 384.Xr zone 9 385for an explanation of memory pools. 386.Pp 387For example, 388.Bd -literal -offset indent 389set limit states 20000 390.Ed 391.Pp 392sets the maximum number of entries in the memory pool used by state table 393entries (generated by 394.Ar pass 395rules which do not specify 396.Ar no state ) 397to 20000. 398Using 399.Bd -literal -offset indent 400set limit frags 20000 401.Ed 402.Pp 403sets the maximum number of entries in the memory pool used for fragment 404reassembly (generated by the 405.Ar set reassemble 406option or 407.Ar scrub 408rules) to 20000. 409Using 410.Bd -literal -offset indent 411set limit src-nodes 2000 412.Ed 413.Pp 414sets the maximum number of entries in the memory pool used for tracking 415source IP addresses (generated by the 416.Ar sticky-address 417and 418.Ar src.track 419options) to 2000. 420Using 421.Bd -literal -offset indent 422set limit table-entries 100000 423.Ed 424.Pp 425sets the limit on the overall number of addresses that can be stored 426in tables to 100000. 427.Pp 428Various limits can be combined on a single line: 429.Bd -literal -offset indent 430set limit { states 20000, frags 20000, src-nodes 2000 } 431.Ed 432.It Ar set ruleset-optimization 433.Bl -tag -width xxxxxxxx -compact 434.It Ar none 435Disable the ruleset optimizer. 436.It Ar basic 437Enable basic ruleset optimization. 438This is the default behaviour. 439Basic ruleset optimization does four things to improve the 440performance of ruleset evaluations: 441.Pp 442.Bl -enum -compact 443.It 444remove duplicate rules 445.It 446remove rules that are a subset of another rule 447.It 448combine multiple rules into a table when advantageous 449.It 450re-order the rules to improve evaluation performance 451.El 452.Pp 453.It Ar profile 454Uses the currently loaded ruleset as a feedback profile to tailor the 455ordering of quick rules to actual network traffic. 456.El 457.Pp 458It is important to note that the ruleset optimizer will modify the ruleset 459to improve performance. 460A side effect of the ruleset modification is that per-rule accounting 461statistics will have different meanings than before. 462If per-rule accounting is important for billing purposes or whatnot, 463either the ruleset optimizer should not be used or a label field should 464be added to all of the accounting rules to act as optimization barriers. 465.Pp 466Optimization can also be set as a command-line argument to 467.Xr pfctl 8 , 468overriding the settings in 469.Nm . 470.It Ar set optimization 471Optimize state timeouts for one of the following network environments: 472.Pp 473.Bl -tag -width xxxx -compact 474.It Ar normal 475A normal network environment. 476Suitable for almost all networks. 477.It Ar high-latency 478A high-latency environment (such as a satellite connection). 479.It Ar satellite 480Alias for 481.Ar high-latency . 482.It Ar aggressive 483Aggressively expire connections. 484This can greatly reduce the memory usage of the firewall at the cost of 485dropping idle connections early. 486.It Ar conservative 487Extremely conservative settings. 488Avoid dropping legitimate connections at the 489expense of greater memory utilization (possibly much greater on a busy 490network) and slightly increased processor utilization. 491.El 492.Pp 493For example: 494.Bd -literal -offset indent 495set optimization aggressive 496.Ed 497.It Ar set reassemble yes | no Op Cm no-df 498The 499.Cm reassemble 500option is used to enable or disable the reassembly of fragmented packets, 501and can be set to 502.Cm yes 503or 504.Cm no . 505If 506.Cm no-df 507is also specified, fragments with the 508.Dq dont-fragment 509bit set are reassembled too, 510instead of being dropped; 511the reassembled packet will have the 512.Dq dont-fragment 513bit cleared. 514The default value is 515.Cm no . 516.Pp 517This option is ignored if there are pre-FreeBSD 14 518.Cm scrub 519rules present. 520.It Ar set block-policy 521The 522.Ar block-policy 523option sets the default behaviour for the packet 524.Ar block 525action: 526.Pp 527.Bl -tag -width xxxxxxxx -compact 528.It Ar drop 529Packet is silently dropped. 530.It Ar return 531A TCP RST is returned for blocked TCP packets, 532an SCTP ABORT chunk is returned for blocked SCTP packets, 533an ICMP UNREACHABLE is returned for blocked UDP packets, 534and all other packets are silently dropped. 535.El 536.Pp 537For example: 538.Bd -literal -offset indent 539set block-policy return 540.Ed 541.It Ar set fail-policy 542The 543.Ar fail-policy 544option sets the behaviour of rules which should pass a packet but were 545unable to do so. 546This might happen when a nat or route-to rule uses an empty table as list 547of targets or if a rule fails to create state or source node. 548The following 549.Ar block 550actions are possible: 551.Pp 552.Bl -tag -width xxxxxxxx -compact 553.It Ar drop 554Incoming packet is silently dropped. 555.It Ar return 556Incoming packet is dropped and TCP RST is returned for TCP packets, 557an SCTP ABORT chunk is returned for blocked SCTP packets, 558an ICMP UNREACHABLE is returned for UDP packets, 559and no response is sent for other packets. 560.El 561.Pp 562For example: 563.Bd -literal -offset indent 564set fail-policy return 565.Ed 566.It Ar set state-policy 567The 568.Ar state-policy 569option sets the default behaviour for states: 570.Pp 571.Bl -tag -width group-bound -compact 572.It Ar if-bound 573States are bound to interface. 574.It Ar floating 575States can match packets on any interfaces (the default). 576.El 577.Pp 578For example: 579.Bd -literal -offset indent 580set state-policy if-bound 581.Ed 582.It Ar set syncookies never | always | adaptive 583When 584.Cm syncookies 585are active, pf will answer each incoming TCP SYN with a syncookie SYNACK, 586without allocating any resources. 587Upon reception of the client's ACK in response to the syncookie 588SYNACK, pf will evaluate the ruleset and create state if the ruleset 589permits it, complete the three way handshake with the target host and 590continue the connection with synproxy in place. 591This allows pf to be resilient against large synflood attacks which would 592run the state table against its limits otherwise. 593Due to the blind answers to every incoming SYN syncookies share the caveats of 594synproxy, namely seemingly accepting connections that will be dropped later on. 595.Pp 596.Bl -tag -width adaptive -compact 597.It Cm never 598pf will never send syncookie SYNACKs (the default). 599.It Cm always 600pf will always send syncookie SYNACKs. 601.It Cm adaptive 602pf will enable syncookie mode when a given percentage of the state table 603is used up by half-open TCP connections, as in, those that saw the initial 604SYN but didn't finish the three way handshake. 605The thresholds for entering and leaving syncookie mode can be specified using 606.Bd -literal -offset indent 607set syncookies adaptive (start 25%, end 12%) 608.Ed 609.El 610.It Ar set state-defaults 611The 612.Ar state-defaults 613option sets the state options for states created from rules 614without an explicit 615.Ar keep state . 616For example: 617.Bd -literal -offset indent 618set state-defaults no-sync 619.Ed 620.It Ar set hostid 621The 32-bit 622.Ar hostid 623identifies this firewall's state table entries to other firewalls 624in a 625.Xr pfsync 4 626failover cluster. 627By default the hostid is set to a pseudo-random value, however it may be 628desirable to manually configure it, for example to more easily identify the 629source of state table entries. 630.Bd -literal -offset indent 631set hostid 1 632.Ed 633.Pp 634The hostid may be specified in either decimal or hexadecimal. 635.It Ar set require-order 636By default 637.Xr pfctl 8 638enforces an ordering of the statement types in the ruleset to: 639.Em options , 640.Em normalization , 641.Em queueing , 642.Em translation , 643.Em filtering . 644Setting this option to 645.Ar no 646disables this enforcement. 647There may be non-trivial and non-obvious implications to an out of 648order ruleset. 649Consider carefully before disabling the order enforcement. 650.It Ar set fingerprints 651Load fingerprints of known operating systems from the given filename. 652By default fingerprints of known operating systems are automatically 653loaded from 654.Xr pf.os 5 655in 656.Pa /etc 657but can be overridden via this option. 658Setting this option may leave a small period of time where the fingerprints 659referenced by the currently active ruleset are inconsistent until the new 660ruleset finishes loading. 661.Pp 662For example: 663.Pp 664.Dl set fingerprints \&"/etc/pf.os.devel\&" 665.It Ar set skip on Aq Ar ifspec 666List interfaces for which packets should not be filtered. 667Packets passing in or out on such interfaces are passed as if pf was 668disabled, i.e. pf does not process them in any way. 669This can be useful on loopback and other virtual interfaces, when 670packet filtering is not desired and can have unexpected effects. 671For example: 672.Pp 673.Dl set skip on lo0 674.It Ar set debug 675Set the debug 676.Ar level 677to one of the following: 678.Pp 679.Bl -tag -width xxxxxxxxxxxx -compact 680.It Ar none 681Don't generate debug messages. 682.It Ar urgent 683Generate debug messages only for serious errors. 684.It Ar misc 685Generate debug messages for various errors. 686.It Ar loud 687Generate debug messages for common conditions. 688.El 689.It Ar set keepcounters 690Preserve rule counters across rule updates. 691Usually rule counters are reset to zero on every update of the ruleset. 692With 693.Ar keepcounters 694set pf will attempt to find matching rules between old and new rulesets 695and preserve the rule counters. 696.El 697.Sh ETHERNET FILTERING 698.Xr pf 4 699has the ability to 700.Ar block 701and 702.Ar pass 703packets based on attributes of their Ethernet (layer 2) header. 704.Pp 705For each packet processed by the packet filter, the filter rules are 706evaluated in sequential order, from first to last. 707The last matching rule decides what action is taken. 708If no rule matches the packet, the default action is to pass 709the packet. 710.Pp 711The following actions can be used in the filter: 712.Bl -tag -width xxxx 713.It Ar block 714The packet is blocked. 715Unlike for layer 3 traffic the packet is always silently dropped. 716.It Ar pass 717The packet is passed; 718no state is created for layer 2 traffic. 719.El 720.Sh PARAMETERS 721The rule parameters specify the packets to which a rule applies. 722A packet always comes in on, or goes out through, one interface. 723Most parameters are optional. 724If a parameter is specified, the rule only applies to packets with 725matching attributes. 726Certain parameters can be expressed as lists, in which case 727.Xr pfctl 8 728generates all needed rule combinations. 729.Bl -tag -width xxxx 730.It Ar in No or Ar out 731This rule applies to incoming or outgoing packets. 732If neither 733.Ar in 734nor 735.Ar out 736are specified, the rule will match packets in both directions. 737.It Ar quick 738If a packet matches a rule which has the 739.Ar quick 740option set, this rule 741is considered the last matching rule, and evaluation of subsequent rules 742is skipped. 743.It Ar on Aq Ar ifspec 744This rule applies only to packets coming in on, or going out through, this 745particular interface or interface group. 746For more information on interface groups, 747see the 748.Ic group 749keyword in 750.Xr ifconfig 8 . 751.It Ar bridge-to Aq interface 752Packets matching this rule will be sent out of the specified interface without 753further processing. 754.It Ar proto Aq Ar protocol 755This rule applies only to packets of this protocol. 756Note that Ethernet protocol numbers are different from those used in 757.Xr ip 4 758and 759.Xr ip6 4 . 760.It Xo 761.Ar from Aq Ar source 762.Ar to Aq Ar dest 763.Xc 764This rule applies only to packets with the specified source and destination 765MAC addresses. 766.It Xo Ar queue Aq Ar queue 767.Xc 768Packets matching this rule will be assigned to the specified queue. 769See 770.Sx QUEUEING 771for setup details. 772.Pp 773.It Ar tag Aq Ar string 774Packets matching this rule will be tagged with the 775specified string. 776The tag acts as an internal marker that can be used to 777identify these packets later on. 778This can be used, for example, to provide trust between 779interfaces and to determine if packets have been 780processed by translation rules. 781Tags are 782.Qq sticky , 783meaning that the packet will be tagged even if the rule 784is not the last matching rule. 785Further matching rules can replace the tag with a 786new one but will not remove a previously applied tag. 787A packet is only ever assigned one tag at a time. 788.It Ar tagged Aq Ar string 789Used to specify that packets must already be tagged with the given tag in order 790to match the rule. 791Inverse tag matching can also be done by specifying the ! operator before the 792tagged keyword. 793.El 794.Sh TRAFFIC NORMALIZATION 795Traffic normalization is a broad umbrella term 796for aspects of the packet filter which deal with 797verifying packets, packet fragments, spoofed traffic, 798and other irregularities. 799.Ss Scrub 800Scrub involves sanitising packet content in such a way 801that there are no ambiguities in packet interpretation on the receiving side. 802It is invoked with the 803.Cm scrub 804option, added to filter rules. 805.Pp 806Parameters are specified enclosed in parentheses. 807At least one of the following parameters must be specified: 808.Bl -tag -width xxxx 809.It Ar no-df 810Clears the 811.Ar dont-fragment 812bit from a matching IP packet. 813Some operating systems are known to generate fragmented packets with the 814.Ar dont-fragment 815bit set. 816This is particularly true with NFS. 817.Ar Scrub 818will drop such fragmented 819.Ar dont-fragment 820packets unless 821.Ar no-df 822is specified. 823.Pp 824Unfortunately some operating systems also generate their 825.Ar dont-fragment 826packets with a zero IP identification field. 827Clearing the 828.Ar dont-fragment 829bit on packets with a zero IP ID may cause deleterious results if an 830upstream router later fragments the packet. 831Using the 832.Ar random-id 833modifier (see below) is recommended in combination with the 834.Ar no-df 835modifier to ensure unique IP identifiers. 836.It Ar min-ttl Aq Ar number 837Enforces a minimum TTL for matching IP packets. 838.It Ar max-mss Aq Ar number 839Enforces a maximum MSS for matching TCP packets. 840.It Xo Ar set-tos Aq Ar string 841.No \*(Ba Aq Ar number 842.Xc 843Enforces a 844.Em TOS 845for matching IP packets. 846.Em TOS 847may be 848given as one of 849.Ar critical , 850.Ar inetcontrol , 851.Ar lowdelay , 852.Ar netcontrol , 853.Ar throughput , 854.Ar reliability , 855or one of the DiffServ Code Points: 856.Ar ef , 857.Ar va , 858.Ar af11 No ... Ar af43 , 859.Ar cs0 No ... Ar cs7 ; 860or as either hex or decimal. 861.It Ar random-id 862Replaces the IP identification field with random values to compensate 863for predictable values generated by many hosts. 864This option only applies to packets that are not fragmented 865after the optional fragment reassembly. 866.It Ar reassemble tcp 867Statefully normalizes TCP connections. 868.Ar reassemble tcp 869performs the following normalizations: 870.Pp 871.Bl -tag -width timeout -compact 872.It ttl 873Neither side of the connection is allowed to reduce their IP TTL. 874An attacker may send a packet such that it reaches the firewall, affects 875the firewall state, and expires before reaching the destination host. 876.Ar reassemble tcp 877will raise the TTL of all packets back up to the highest value seen on 878the connection. 879.It timestamp modulation 880Modern TCP stacks will send a timestamp on every TCP packet and echo 881the other endpoint's timestamp back to them. 882Many operating systems will merely start the timestamp at zero when 883first booted, and increment it several times a second. 884The uptime of the host can be deduced by reading the timestamp and multiplying 885by a constant. 886Also observing several different timestamps can be used to count hosts 887behind a NAT device. 888And spoofing TCP packets into a connection requires knowing or guessing 889valid timestamps. 890Timestamps merely need to be monotonically increasing and not derived off a 891guessable base time. 892.Ar reassemble tcp 893will cause 894.Ar scrub 895to modulate the TCP timestamps with a random number. 896.It extended PAWS checks 897There is a problem with TCP on long fat pipes, in that a packet might get 898delayed for longer than it takes the connection to wrap its 32-bit sequence 899space. 900In such an occurrence, the old packet would be indistinguishable from a 901new packet and would be accepted as such. 902The solution to this is called PAWS: Protection Against Wrapped Sequence 903numbers. 904It protects against it by making sure the timestamp on each packet does 905not go backwards. 906.Ar reassemble tcp 907also makes sure the timestamp on the packet does not go forward more 908than the RFC allows. 909By doing this, 910.Xr pf 4 911artificially extends the security of TCP sequence numbers by 10 to 18 912bits when the host uses appropriately randomized timestamps, since a 913blind attacker would have to guess the timestamp as well. 914.El 915.El 916.Pp 917For example, 918.Bd -literal -offset indent 919match in all scrub (no-df random-id max-mss 1440) 920.Ed 921.Ss Scrub ruleset (pre-FreeBSD 14) 922In order to maintain compatibility with older releases of FreeBSD 923.Ar scrub 924rules can also be specified in their own ruleset. 925In such case they are invoked with the 926.Ar scrub 927directive. 928If there are such rules present they determine packet reassembly behaviour. 929When no such rules are present the option 930.Ar set reassembly 931takes precedence. 932The 933.Ar scrub 934rules can take all parameters specified above for a 935.Ar scrub 936option of filter rules and 2 more parameters controlling fragment reassembly: 937.Bl -tag -width xxxx 938.It Ar fragment reassemble 939Using 940.Ar scrub 941rules, fragments can be reassembled by normalization. 942In this case, fragments are buffered until they form a complete 943packet, and only the completed packet is passed on to the filter. 944The advantage is that filter rules have to deal only with complete 945packets, and can ignore fragments. 946The drawback of caching fragments is the additional memory cost. 947This is the default behaviour unless no fragment reassemble is specified. 948.It Ar no fragment reassemble 949Do not reassemble fragments. 950.El 951.Pp 952For example, 953.Bd -literal -offset indent 954scrub in on $ext_if all fragment reassemble 955.Ed 956.Pp 957The 958.Ar no 959option prefixed to a scrub rule causes matching packets to remain unscrubbed, 960much in the same way as 961.Ar drop quick 962works in the packet filter (see below). 963This mechanism should be used when it is necessary to exclude specific packets 964from broader scrub rules. 965.Pp 966.Ar scrub 967rules in the 968.Ar scrub 969ruleset are evaluated for every packet before stateful filtering. 970This means excessive usage of them will cause performance penalty. 971.Ar scrub reassemble tcp 972rules must not have the direction (in/out) specified. 973.Sh QUEUEING with ALTQ 974The ALTQ system is currently not available in the GENERIC kernel nor as 975loadable modules. 976In order to use the herein after called queueing options one has to use a 977custom built kernel. 978Please refer to 979.Xr altq 4 980to learn about the related kernel options. 981.Pp 982Packets can be assigned to queues for the purpose of bandwidth 983control. 984At least two declarations are required to configure queues, and later 985any packet filtering rule can reference the defined queues by name. 986During the filtering component of 987.Nm pf.conf , 988the last referenced 989.Ar queue 990name is where any packets from 991.Ar pass 992rules will be queued, while for 993.Ar block 994rules it specifies where any resulting ICMP or TCP RST 995packets should be queued. 996The 997.Ar scheduler 998defines the algorithm used to decide which packets get delayed, dropped, or 999sent out immediately. 1000There are three 1001.Ar schedulers 1002currently supported. 1003.Bl -tag -width xxxx 1004.It Ar cbq 1005Class Based Queueing. 1006.Ar Queues 1007attached to an interface build a tree, thus each 1008.Ar queue 1009can have further child 1010.Ar queues . 1011Each queue can have a 1012.Ar priority 1013and a 1014.Ar bandwidth 1015assigned. 1016.Ar Priority 1017mainly controls the time packets take to get sent out, while 1018.Ar bandwidth 1019has primarily effects on throughput. 1020.Ar cbq 1021achieves both partitioning and sharing of link bandwidth 1022by hierarchically structured classes. 1023Each class has its own 1024.Ar queue 1025and is assigned its share of 1026.Ar bandwidth . 1027A child class can borrow bandwidth from its parent class 1028as long as excess bandwidth is available 1029(see the option 1030.Ar borrow , 1031below). 1032.It Ar priq 1033Priority Queueing. 1034.Ar Queues 1035are flat attached to the interface, thus, 1036.Ar queues 1037cannot have further child 1038.Ar queues . 1039Each 1040.Ar queue 1041has a unique 1042.Ar priority 1043assigned, ranging from 0 to 15. 1044Packets in the 1045.Ar queue 1046with the highest 1047.Ar priority 1048are processed first. 1049.It Ar hfsc 1050Hierarchical Fair Service Curve. 1051.Ar Queues 1052attached to an interface build a tree, thus each 1053.Ar queue 1054can have further child 1055.Ar queues . 1056Each queue can have a 1057.Ar priority 1058and a 1059.Ar bandwidth 1060assigned. 1061.Ar Priority 1062mainly controls the time packets take to get sent out, while 1063.Ar bandwidth 1064primarily affects throughput. 1065.Ar hfsc 1066supports both link-sharing and guaranteed real-time services. 1067It employs a service curve based QoS model, 1068and its unique feature is an ability to decouple 1069.Ar delay 1070and 1071.Ar bandwidth 1072allocation. 1073.El 1074.Pp 1075The interfaces on which queueing should be activated are declared using 1076the 1077.Ar altq on 1078declaration. 1079.Ar altq on 1080has the following keywords: 1081.Bl -tag -width xxxx 1082.It Aq Ar interface 1083Queueing is enabled on the named interface. 1084.It Aq Ar scheduler 1085Specifies which queueing scheduler to use. 1086Currently supported values 1087are 1088.Ar cbq 1089for Class Based Queueing, 1090.Ar priq 1091for Priority Queueing and 1092.Ar hfsc 1093for the Hierarchical Fair Service Curve scheduler. 1094.It Ar bandwidth Aq Ar bw 1095The maximum bitrate for all queues on an 1096interface may be specified using the 1097.Ar bandwidth 1098keyword. 1099The value can be specified as an absolute value or as a 1100percentage of the interface bandwidth. 1101When using an absolute value, the suffixes 1102.Ar b , 1103.Ar Kb , 1104.Ar Mb , 1105and 1106.Ar Gb 1107are used to represent bits, kilobits, megabits, and 1108gigabits per second, respectively. 1109The value must not exceed the interface bandwidth. 1110If 1111.Ar bandwidth 1112is not specified, the interface bandwidth is used 1113(but take note that some interfaces do not know their bandwidth, 1114or can adapt their bandwidth rates). 1115.It Ar qlimit Aq Ar limit 1116The maximum number of packets held in the queue. 1117The default is 50. 1118.It Ar tbrsize Aq Ar size 1119Adjusts the size, in bytes, of the token bucket regulator. 1120If not specified, heuristics based on the 1121interface bandwidth are used to determine the size. 1122.It Ar queue Aq Ar list 1123Defines a list of subqueues to create on an interface. 1124.El 1125.Pp 1126In the following example, the interface dc0 1127should queue up to 5Mbps in four second-level queues using 1128Class Based Queueing. 1129Those four queues will be shown in a later example. 1130.Bd -literal -offset indent 1131altq on dc0 cbq bandwidth 5Mb queue { std, http, mail, ssh } 1132.Ed 1133.Pp 1134Once interfaces are activated for queueing using the 1135.Ar altq 1136directive, a sequence of 1137.Ar queue 1138directives may be defined. 1139The name associated with a 1140.Ar queue 1141must match a queue defined in the 1142.Ar altq 1143directive (e.g. mail), or, except for the 1144.Ar priq 1145.Ar scheduler , 1146in a parent 1147.Ar queue 1148declaration. 1149The following keywords can be used: 1150.Bl -tag -width xxxx 1151.It Ar on Aq Ar interface 1152Specifies the interface the queue operates on. 1153If not given, it operates on all matching interfaces. 1154.It Ar bandwidth Aq Ar bw 1155Specifies the maximum bitrate to be processed by the queue. 1156This value must not exceed the value of the parent 1157.Ar queue 1158and can be specified as an absolute value or a percentage of the parent 1159queue's bandwidth. 1160If not specified, defaults to 100% of the parent queue's bandwidth. 1161The 1162.Ar priq 1163scheduler does not support bandwidth specification. 1164.It Ar priority Aq Ar level 1165Between queues a priority level can be set. 1166For 1167.Ar cbq 1168and 1169.Ar hfsc , 1170the range is 0 to 7 and for 1171.Ar priq , 1172the range is 0 to 15. 1173The default for all is 1. 1174.Ar Priq 1175queues with a higher priority are always served first. 1176.Ar Cbq 1177and 1178.Ar Hfsc 1179queues with a higher priority are preferred in the case of overload. 1180.It Ar qlimit Aq Ar limit 1181The maximum number of packets held in the queue. 1182The default is 50. 1183.El 1184.Pp 1185The 1186.Ar scheduler 1187can get additional parameters with 1188.Xo Aq Ar scheduler 1189.Pf ( Aq Ar parameters ) . 1190.Xc 1191Parameters are as follows: 1192.Bl -tag -width Fl 1193.It Ar default 1194Packets not matched by another queue are assigned to this one. 1195Exactly one default queue is required. 1196.It Ar red 1197Enable RED (Random Early Detection) on this queue. 1198RED drops packets with a probability proportional to the average 1199queue length. 1200.It Ar rio 1201Enables RIO on this queue. 1202RIO is RED with IN/OUT, thus running 1203RED two times more than RIO would achieve the same effect. 1204RIO is currently not supported in the GENERIC kernel. 1205.It Ar ecn 1206Enables ECN (Explicit Congestion Notification) on this queue. 1207ECN implies RED. 1208.El 1209.Pp 1210The 1211.Ar cbq 1212.Ar scheduler 1213supports an additional option: 1214.Bl -tag -width Fl 1215.It Ar borrow 1216The queue can borrow bandwidth from the parent. 1217.El 1218.Pp 1219The 1220.Ar hfsc 1221.Ar scheduler 1222supports some additional options: 1223.Bl -tag -width Fl 1224.It Ar realtime Aq Ar sc 1225The minimum required bandwidth for the queue. 1226.It Ar upperlimit Aq Ar sc 1227The maximum allowed bandwidth for the queue. 1228.It Ar linkshare Aq Ar sc 1229The bandwidth share of a backlogged queue. 1230.El 1231.Pp 1232.Aq Ar sc 1233is an acronym for 1234.Ar service curve . 1235.Pp 1236The format for service curve specifications is 1237.Ar ( m1 , d , m2 ) . 1238.Ar m2 1239controls the bandwidth assigned to the queue. 1240.Ar m1 1241and 1242.Ar d 1243are optional and can be used to control the initial bandwidth assignment. 1244For the first 1245.Ar d 1246milliseconds the queue gets the bandwidth given as 1247.Ar m1 , 1248afterwards the value given in 1249.Ar m2 . 1250.Pp 1251Furthermore, with 1252.Ar cbq 1253and 1254.Ar hfsc , 1255child queues can be specified as in an 1256.Ar altq 1257declaration, thus building a tree of queues using a part of 1258their parent's bandwidth. 1259.Pp 1260Packets can be assigned to queues based on filter rules by using the 1261.Ar queue 1262keyword. 1263Normally only one 1264.Ar queue 1265is specified; when a second one is specified it will instead be used for 1266packets which have a 1267.Em TOS 1268of 1269.Em lowdelay 1270and for TCP ACKs with no data payload. 1271.Pp 1272To continue the previous example, the examples below would specify the 1273four referenced 1274queues, plus a few child queues. 1275Interactive 1276.Xr ssh 1 1277sessions get priority over bulk transfers like 1278.Xr scp 1 1279and 1280.Xr sftp 1 . 1281The queues may then be referenced by filtering rules (see 1282.Sx PACKET FILTERING 1283below). 1284.Bd -literal 1285queue std bandwidth 10% cbq(default) 1286queue http bandwidth 60% priority 2 cbq(borrow red) \e 1287 { employees, developers } 1288queue developers bandwidth 75% cbq(borrow) 1289queue employees bandwidth 15% 1290queue mail bandwidth 10% priority 0 cbq(borrow ecn) 1291queue ssh bandwidth 20% cbq(borrow) { ssh_interactive, ssh_bulk } 1292queue ssh_interactive bandwidth 50% priority 7 cbq(borrow) 1293queue ssh_bulk bandwidth 50% priority 0 cbq(borrow) 1294 1295block return out on dc0 inet all queue std 1296pass out on dc0 inet proto tcp from $developerhosts to any port 80 \e 1297 queue developers 1298pass out on dc0 inet proto tcp from $employeehosts to any port 80 \e 1299 queue employees 1300pass out on dc0 inet proto tcp from any to any port 22 \e 1301 queue(ssh_bulk, ssh_interactive) 1302pass out on dc0 inet proto tcp from any to any port 25 \e 1303 queue mail 1304.Ed 1305.Sh QUEUEING with dummynet 1306Queueing can also be done with 1307.Xr dummynet 4 . 1308Queues and pipes can be created with 1309.Xr dnctl 8 . 1310.Pp 1311Packets can be assigned to queues and pipes using 1312.Ar dnqueue 1313and 1314.Ar dnpipe 1315respectively. 1316.Pp 1317Both 1318.Ar dnqueue 1319and 1320.Ar dnpipe 1321take either a single pipe or queue number or two numbers as arguments. 1322The first pipe or queue number will be used to shape the traffic in the rule 1323direction, the second will be used to shape the traffic in the reverse 1324direction. 1325If the rule does not specify a direction the first packet to create state will 1326be shaped according to the first number, and the response traffic according to 1327the second. 1328.Pp 1329If the 1330.Xr dummynet 4 1331module is not loaded any traffic sent into a queue or pipe will be dropped. 1332.Sh TRANSLATION 1333Translation rules modify either the source or destination address of the 1334packets associated with a stateful connection. 1335A stateful connection is automatically created to track packets matching 1336such a rule as long as they are not blocked by the filtering section of 1337.Nm pf.conf . 1338The translation engine modifies the specified address and/or port in the 1339packet, recalculates IP, TCP and UDP checksums as necessary, and passes 1340it to the packet filter for evaluation. 1341.Pp 1342Since translation occurs before filtering the filter 1343engine will see packets as they look after any 1344addresses and ports have been translated. 1345Filter rules will therefore have to filter based on the translated 1346address and port number. 1347Packets that match a translation rule are only automatically passed if 1348the 1349.Ar pass 1350modifier is given, otherwise they are 1351still subject to 1352.Ar block 1353and 1354.Ar pass 1355rules. 1356.Pp 1357The state entry created permits 1358.Xr pf 4 1359to keep track of the original address for traffic associated with that state 1360and correctly direct return traffic for that connection. 1361.Pp 1362Various types of translation are possible with pf: 1363.Bl -tag -width xxxx 1364.It Ar binat 1365A 1366.Ar binat 1367rule specifies a bidirectional mapping between an external IP netblock 1368and an internal IP netblock. 1369.It Ar nat 1370A 1371.Ar nat 1372rule specifies that IP addresses are to be changed as the packet 1373traverses the given interface. 1374This technique allows one or more IP addresses 1375on the translating host to support network traffic for a larger range of 1376machines on an "inside" network. 1377Although in theory any IP address can be used on the inside, it is strongly 1378recommended that one of the address ranges defined by RFC 1918 be used. 1379These netblocks are: 1380.Bd -literal 138110.0.0.0 - 10.255.255.255 (all of net 10, i.e., 10/8) 1382172.16.0.0 - 172.31.255.255 (i.e., 172.16/12) 1383192.168.0.0 - 192.168.255.255 (i.e., 192.168/16) 1384.Ed 1385.It Pa rdr 1386The packet is redirected to another destination and possibly a 1387different port. 1388.Ar rdr 1389rules can optionally specify port ranges instead of single ports. 1390rdr ... port 2000:2999 -\*(Gt ... port 4000 1391redirects ports 2000 to 2999 (inclusive) to port 4000. 1392rdr ... port 2000:2999 -\*(Gt ... port 4000:* 1393redirects port 2000 to 4000, 2001 to 4001, ..., 2999 to 4999. 1394.El 1395.Pp 1396In addition to modifying the address, some translation rules may modify 1397source or destination ports for 1398.Xr tcp 4 1399or 1400.Xr udp 4 1401connections; implicitly in the case of 1402.Ar nat 1403rules and explicitly in the case of 1404.Ar rdr 1405rules. 1406Port numbers are never translated with a 1407.Ar binat 1408rule. 1409.Pp 1410Evaluation order of the translation rules is dependent on the type 1411of the translation rules and of the direction of a packet. 1412.Ar binat 1413rules are always evaluated first. 1414Then either the 1415.Ar rdr 1416rules are evaluated on an inbound packet or the 1417.Ar nat 1418rules on an outbound packet. 1419Rules of the same type are evaluated in the same order in which they 1420appear in the ruleset. 1421The first matching rule decides what action is taken. 1422.Pp 1423The 1424.Ar no 1425option prefixed to a translation rule causes packets to remain untranslated, 1426much in the same way as 1427.Ar drop quick 1428works in the packet filter (see below). 1429If no rule matches the packet it is passed to the filter engine unmodified. 1430.Pp 1431Translation rules apply only to packets that pass through 1432the specified interface, and if no interface is specified, 1433translation is applied to packets on all interfaces. 1434For instance, redirecting port 80 on an external interface to an internal 1435web server will only work for connections originating from the outside. 1436Connections to the address of the external interface from local hosts will 1437not be redirected, since such packets do not actually pass through the 1438external interface. 1439Redirections cannot reflect packets back through the interface they arrive 1440on, they can only be redirected to hosts connected to different interfaces 1441or to the firewall itself. 1442.Pp 1443Note that redirecting external incoming connections to the loopback 1444address, as in 1445.Bd -literal -offset indent 1446rdr on ne3 inet proto tcp to port smtp -\*(Gt 127.0.0.1 port spamd 1447.Ed 1448.Pp 1449will effectively allow an external host to connect to daemons 1450bound solely to the loopback address, circumventing the traditional 1451blocking of such connections on a real interface. 1452Unless this effect is desired, any of the local non-loopback addresses 1453should be used as redirection target instead, which allows external 1454connections only to daemons bound to this address or not bound to 1455any address. 1456.Pp 1457See 1458.Sx TRANSLATION EXAMPLES 1459below. 1460.Sh PACKET FILTERING 1461.Xr pf 4 1462has the ability to 1463.Ar block 1464, 1465.Ar pass 1466and 1467.Ar match 1468packets based on attributes of their layer 3 (see 1469.Xr ip 4 1470and 1471.Xr ip6 4 ) 1472and layer 4 (see 1473.Xr icmp 4 , 1474.Xr icmp6 4 , 1475.Xr tcp 4 , 1476.Xr sctp 4 , 1477.Xr udp 4 ) 1478headers. 1479In addition, packets may also be 1480assigned to queues for the purpose of bandwidth control. 1481.Pp 1482For each packet processed by the packet filter, the filter rules are 1483evaluated in sequential order, from first to last. 1484For 1485.Ar block 1486and 1487.Ar pass 1488, the last matching rule decides what action is taken. 1489For 1490.Ar match 1491, rules are evaluated every time they match; the pass/block state of a packet 1492remains unchanged. 1493If no rule matches the packet, the default action is to pass 1494the packet. 1495.Pp 1496The following actions can be used in the filter: 1497.Bl -tag -width xxxx 1498.It Ar block 1499The packet is blocked. 1500There are a number of ways in which a 1501.Ar block 1502rule can behave when blocking a packet. 1503The default behaviour is to 1504.Ar drop 1505packets silently, however this can be overridden or made 1506explicit either globally, by setting the 1507.Ar block-policy 1508option, or on a per-rule basis with one of the following options: 1509.Pp 1510.Bl -tag -width xxxx -compact 1511.It Ar drop 1512The packet is silently dropped. 1513.It Ar return-rst 1514This applies only to 1515.Xr tcp 4 1516packets, and issues a TCP RST which closes the 1517connection. 1518.It Ar return-icmp 1519.It Ar return-icmp6 1520This causes ICMP messages to be returned for packets which match the rule. 1521By default this is an ICMP UNREACHABLE message, however this 1522can be overridden by specifying a message as a code or number. 1523.It Ar return 1524This causes a TCP RST to be returned for 1525.Xr tcp 4 1526packets, an SCTP ABORT for SCTP 1527and an ICMP UNREACHABLE for UDP and other packets. 1528.El 1529.Pp 1530Options returning ICMP packets currently have no effect if 1531.Xr pf 4 1532operates on a 1533.Xr if_bridge 4 , 1534as the code to support this feature has not yet been implemented. 1535.Pp 1536The simplest mechanism to block everything by default and only pass 1537packets that match explicit rules is specify a first filter rule of: 1538.Bd -literal -offset indent 1539block all 1540.Ed 1541.It Ar match 1542The packet is matched. 1543This mechanism is used to provide fine grained filtering without altering the 1544block/pass state of a packet. 1545.Ar match 1546rules differ from 1547.Ar block 1548and 1549.Ar pass 1550rules in that parameters are set for every rule a packet matches, not only 1551on the last matching rule. 1552For the following parameters, this means that the parameter effectively becomes 1553"sticky" until explicitly overridden: 1554.Ar queue , 1555.Ar dnpipe , 1556.Ar dnqueue , 1557.Ar rtable , 1558.Ar scrub 1559. 1560.It Ar pass 1561The packet is passed; 1562state is created unless the 1563.Ar no state 1564option is specified. 1565.El 1566.Pp 1567By default 1568.Xr pf 4 1569filters packets statefully; the first time a packet matches a 1570.Ar pass 1571rule, a state entry is created; for subsequent packets the filter checks 1572whether the packet matches any state. 1573If it does, the packet is passed without evaluation of any rules. 1574After the connection is closed or times out, the state entry is automatically 1575removed. 1576.Pp 1577This has several advantages. 1578For TCP connections, comparing a packet to a state involves checking 1579its sequence numbers, as well as TCP timestamps if a 1580.Ar scrub reassemble tcp 1581rule applies to the connection. 1582If these values are outside the narrow windows of expected 1583values, the packet is dropped. 1584This prevents spoofing attacks, such as when an attacker sends packets with 1585a fake source address/port but does not know the connection's sequence 1586numbers. 1587Similarly, 1588.Xr pf 4 1589knows how to match ICMP replies to states. 1590For example, 1591.Bd -literal -offset indent 1592pass out inet proto icmp all icmp-type echoreq 1593.Ed 1594.Pp 1595allows echo requests (such as those created by 1596.Xr ping 8 ) 1597out statefully, and matches incoming echo replies correctly to states. 1598.Pp 1599Also, looking up states is usually faster than evaluating rules. 1600If there are 50 rules, all of them are evaluated sequentially in O(n). 1601Even with 50000 states, only 16 comparisons are needed to match a 1602state, since states are stored in a binary search tree that allows 1603searches in O(log2 n). 1604.Pp 1605Furthermore, correct handling of ICMP error messages is critical to 1606many protocols, particularly TCP. 1607.Xr pf 4 1608matches ICMP error messages to the correct connection, checks them against 1609connection parameters, and passes them if appropriate. 1610For example if an ICMP source quench message referring to a stateful TCP 1611connection arrives, it will be matched to the state and get passed. 1612.Pp 1613Finally, state tracking is required for 1614.Ar nat , binat No and Ar rdr 1615rules, in order to track address and port translations and reverse the 1616translation on returning packets. 1617.Pp 1618.Xr pf 4 1619will also create state for other protocols which are effectively stateless by 1620nature. 1621UDP packets are matched to states using only host addresses and ports, 1622and other protocols are matched to states using only the host addresses. 1623.Pp 1624If stateless filtering of individual packets is desired, 1625the 1626.Ar no state 1627keyword can be used to specify that state will not be created 1628if this is the last matching rule. 1629A number of parameters can also be set to affect how 1630.Xr pf 4 1631handles state tracking. 1632See 1633.Sx STATEFUL TRACKING OPTIONS 1634below for further details. 1635.Sh PARAMETERS 1636The rule parameters specify the packets to which a rule applies. 1637A packet always comes in on, or goes out through, one interface. 1638Most parameters are optional. 1639If a parameter is specified, the rule only applies to packets with 1640matching attributes. 1641Certain parameters can be expressed as lists, in which case 1642.Xr pfctl 8 1643generates all needed rule combinations. 1644.Bl -tag -width xxxx 1645.It Ar in No or Ar out 1646This rule applies to incoming or outgoing packets. 1647If neither 1648.Ar in 1649nor 1650.Ar out 1651are specified, the rule will match packets in both directions. 1652.It Ar log 1653In addition to the action specified, a log message is generated. 1654Only the packet that establishes the state is logged, 1655unless the 1656.Ar no state 1657option is specified. 1658The logged packets are sent to a 1659.Xr pflog 4 1660interface, by default 1661.Ar pflog0 . 1662This interface is monitored by the 1663.Xr pflogd 8 1664logging daemon, which dumps the logged packets to the file 1665.Pa /var/log/pflog 1666in 1667.Xr pcap 3 1668binary format. 1669.It Ar log (all) 1670Used to force logging of all packets for a connection. 1671This is not necessary when 1672.Ar no state 1673is explicitly specified. 1674As with 1675.Ar log , 1676packets are logged to 1677.Xr pflog 4 . 1678.It Ar log (user) 1679Logs the 1680.Ux 1681user ID of the user that owns the socket and the PID of the process that 1682has the socket open where the packet is sourced from or destined to 1683(depending on which socket is local). 1684This is in addition to the normal information logged. 1685.Pp 1686Only the first packet 1687logged via 1688.Ar log (all, user) 1689will have the user credentials logged when using stateful matching. 1690.It Ar log (to Aq Ar interface ) 1691Send logs to the specified 1692.Xr pflog 4 1693interface instead of 1694.Ar pflog0 . 1695.It Ar quick 1696If a packet matches a rule which has the 1697.Ar quick 1698option set, this rule 1699is considered the last matching rule, and evaluation of subsequent rules 1700is skipped. 1701.It Ar on Aq Ar interface 1702This rule applies only to packets coming in on, or going out through, this 1703particular interface or interface group. 1704For more information on interface groups, 1705see the 1706.Ic group 1707keyword in 1708.Xr ifconfig 8 . 1709.It Aq Ar af 1710This rule applies only to packets of this address family. 1711Supported values are 1712.Ar inet 1713and 1714.Ar inet6 . 1715.It Ar proto Aq Ar protocol 1716This rule applies only to packets of this protocol. 1717Common protocols are 1718.Xr icmp 4 , 1719.Xr icmp6 4 , 1720.Xr tcp 4 , 1721.Xr sctp 4 , 1722and 1723.Xr udp 4 . 1724For a list of all the protocol name to number mappings used by 1725.Xr pfctl 8 , 1726see the file 1727.Pa /etc/protocols . 1728.It Xo 1729.Ar from Aq Ar source 1730.Ar port Aq Ar source 1731.Ar os Aq Ar source 1732.Ar to Aq Ar dest 1733.Ar port Aq Ar dest 1734.Xc 1735This rule applies only to packets with the specified source and destination 1736addresses and ports. 1737.Pp 1738Addresses can be specified in CIDR notation (matching netblocks), as 1739symbolic host names, interface names or interface group names, or as any 1740of the following keywords: 1741.Pp 1742.Bl -tag -width xxxxxxxxxxxxxx -compact 1743.It Ar any 1744Any address. 1745.It Ar no-route 1746Any address which is not currently routable. 1747.It Ar urpf-failed 1748Any source address that fails a unicast reverse path forwarding (URPF) 1749check, i.e. packets coming in on an interface other than that which holds 1750the route back to the packet's source address. 1751.It Aq Ar table 1752Any address that matches the given table. 1753.El 1754.Pp 1755Ranges of addresses are specified by using the 1756.Sq - 1757operator. 1758For instance: 1759.Dq 10.1.1.10 - 10.1.1.12 1760means all addresses from 10.1.1.10 to 10.1.1.12, 1761hence addresses 10.1.1.10, 10.1.1.11, and 10.1.1.12. 1762.Pp 1763Interface names and interface group names can have modifiers appended: 1764.Pp 1765.Bl -tag -width xxxxxxxxxxxx -compact 1766.It Ar :network 1767Translates to the network(s) attached to the interface. 1768.It Ar :broadcast 1769Translates to the interface's broadcast address(es). 1770.It Ar :peer 1771Translates to the point-to-point interface's peer address(es). 1772.It Ar :0 1773Do not include interface aliases. 1774.El 1775.Pp 1776Host names may also have the 1777.Ar :0 1778option appended to restrict the name resolution to the first of each 1779v4 and non-link-local v6 address found. 1780.Pp 1781Host name resolution and interface to address translation are done at 1782ruleset load-time. 1783When the address of an interface (or host name) changes (under DHCP or PPP, 1784for instance), the ruleset must be reloaded for the change to be reflected 1785in the kernel. 1786Surrounding the interface name (and optional modifiers) in parentheses 1787changes this behaviour. 1788When the interface name is surrounded by parentheses, the rule is 1789automatically updated whenever the interface changes its address. 1790The ruleset does not need to be reloaded. 1791This is especially useful with 1792.Ar nat . 1793.Pp 1794Ports can be specified either by number or by name. 1795For example, port 80 can be specified as 1796.Em www . 1797For a list of all port name to number mappings used by 1798.Xr pfctl 8 , 1799see the file 1800.Pa /etc/services . 1801.Pp 1802Ports and ranges of ports are specified by using these operators: 1803.Bd -literal -offset indent 1804= (equal) 1805!= (unequal) 1806\*(Lt (less than) 1807\*(Le (less than or equal) 1808\*(Gt (greater than) 1809\*(Ge (greater than or equal) 1810: (range including boundaries) 1811\*(Gt\*(Lt (range excluding boundaries) 1812\*(Lt\*(Gt (except range) 1813.Ed 1814.Pp 1815.Sq \*(Gt\*(Lt , 1816.Sq \*(Lt\*(Gt 1817and 1818.Sq \&: 1819are binary operators (they take two arguments). 1820For instance: 1821.Bl -tag -width Fl 1822.It Ar port 2000:2004 1823means 1824.Sq all ports \*(Ge 2000 and \*(Le 2004 , 1825hence ports 2000, 2001, 2002, 2003 and 2004. 1826.It Ar port 2000 \*(Gt\*(Lt 2004 1827means 1828.Sq all ports \*(Gt 2000 and \*(Lt 2004 , 1829hence ports 2001, 2002 and 2003. 1830.It Ar port 2000 \*(Lt\*(Gt 2004 1831means 1832.Sq all ports \*(Lt 2000 or \*(Gt 2004 , 1833hence ports 1-1999 and 2005-65535. 1834.El 1835.Pp 1836The operating system of the source host can be specified in the case of TCP 1837rules with the 1838.Ar OS 1839modifier. 1840See the 1841.Sx OPERATING SYSTEM FINGERPRINTING 1842section for more information. 1843.Pp 1844The host, port and OS specifications are optional, as in the following examples: 1845.Bd -literal -offset indent 1846pass in all 1847pass in from any to any 1848pass in proto tcp from any port \*(Le 1024 to any 1849pass in proto tcp from any to any port 25 1850pass in proto tcp from 10.0.0.0/8 port \*(Gt 1024 \e 1851 to ! 10.1.2.3 port != ssh 1852pass in proto tcp from any os "OpenBSD" 1853.Ed 1854.It Ar all 1855This is equivalent to "from any to any". 1856.It Ar group Aq Ar group 1857Similar to 1858.Ar user , 1859this rule only applies to packets of sockets owned by the specified group. 1860.It Ar user Aq Ar user 1861This rule only applies to packets of sockets owned by the specified user. 1862For outgoing connections initiated from the firewall, this is the user 1863that opened the connection. 1864For incoming connections to the firewall itself, this is the user that 1865listens on the destination port. 1866For forwarded connections, where the firewall is not a connection endpoint, 1867the user and group are 1868.Em unknown . 1869.Pp 1870All packets, both outgoing and incoming, of one connection are associated 1871with the same user and group. 1872Only TCP and UDP packets can be associated with users; for other protocols 1873these parameters are ignored. 1874.Pp 1875User and group refer to the effective (as opposed to the real) IDs, in 1876case the socket is created by a setuid/setgid process. 1877User and group IDs are stored when a socket is created; 1878when a process creates a listening socket as root (for instance, by 1879binding to a privileged port) and subsequently changes to another 1880user ID (to drop privileges), the credentials will remain root. 1881.Pp 1882User and group IDs can be specified as either numbers or names. 1883The syntax is similar to the one for ports. 1884The value 1885.Em unknown 1886matches packets of forwarded connections. 1887.Em unknown 1888can only be used with the operators 1889.Cm = 1890and 1891.Cm != . 1892Other constructs like 1893.Cm user \*(Ge unknown 1894are invalid. 1895Forwarded packets with unknown user and group ID match only rules 1896that explicitly compare against 1897.Em unknown 1898with the operators 1899.Cm = 1900or 1901.Cm != . 1902For instance 1903.Cm user \*(Ge 0 1904does not match forwarded packets. 1905The following example allows only selected users to open outgoing 1906connections: 1907.Bd -literal -offset indent 1908block out proto { tcp, udp } all 1909pass out proto { tcp, udp } all user { \*(Lt 1000, dhartmei } 1910.Ed 1911.It Xo Ar flags Aq Ar a 1912.Pf / Ns Aq Ar b 1913.No \*(Ba / Ns Aq Ar b 1914.No \*(Ba any 1915.Xc 1916This rule only applies to TCP packets that have the flags 1917.Aq Ar a 1918set out of set 1919.Aq Ar b . 1920Flags not specified in 1921.Aq Ar b 1922are ignored. 1923For stateful connections, the default is 1924.Ar flags S/SA . 1925To indicate that flags should not be checked at all, specify 1926.Ar flags any . 1927The flags are: (F)IN, (S)YN, (R)ST, (P)USH, (A)CK, (U)RG, (E)CE, and C(W)R. 1928.Bl -tag -width Fl 1929.It Ar flags S/S 1930Flag SYN is set. 1931The other flags are ignored. 1932.It Ar flags S/SA 1933This is the default setting for stateful connections. 1934Out of SYN and ACK, exactly SYN may be set. 1935SYN, SYN+PSH and SYN+RST match, but SYN+ACK, ACK and ACK+RST do not. 1936This is more restrictive than the previous example. 1937.It Ar flags /SFRA 1938If the first set is not specified, it defaults to none. 1939All of SYN, FIN, RST and ACK must be unset. 1940.El 1941.Pp 1942Because 1943.Ar flags S/SA 1944is applied by default (unless 1945.Ar no state 1946is specified), only the initial SYN packet of a TCP handshake will create 1947a state for a TCP connection. 1948It is possible to be less restrictive, and allow state creation from 1949intermediate 1950.Pq non-SYN 1951packets, by specifying 1952.Ar flags any . 1953This will cause 1954.Xr pf 4 1955to synchronize to existing connections, for instance 1956if one flushes the state table. 1957However, states created from such intermediate packets may be missing 1958connection details such as the TCP window scaling factor. 1959States which modify the packet flow, such as those affected by 1960.Ar nat , binat No or Ar rdr 1961rules, 1962.Ar modulate No or Ar synproxy state 1963options, or scrubbed with 1964.Ar reassemble tcp 1965will also not be recoverable from intermediate packets. 1966Such connections will stall and time out. 1967.It Xo Ar icmp-type Aq Ar type 1968.Ar code Aq Ar code 1969.Xc 1970.It Xo Ar icmp6-type Aq Ar type 1971.Ar code Aq Ar code 1972.Xc 1973This rule only applies to ICMP or ICMPv6 packets with the specified type 1974and code. 1975Text names for ICMP types and codes are listed in 1976.Xr icmp 4 1977and 1978.Xr icmp6 4 . 1979This parameter is only valid for rules that cover protocols ICMP or 1980ICMP6. 1981The protocol and the ICMP type indicator 1982.Po 1983.Ar icmp-type 1984or 1985.Ar icmp6-type 1986.Pc 1987must match. 1988.It Xo Ar tos Aq Ar string 1989.No \*(Ba Aq Ar number 1990.Xc 1991This rule applies to packets with the specified 1992.Em TOS 1993bits set. 1994.Em TOS 1995may be 1996given as one of 1997.Ar critical , 1998.Ar inetcontrol , 1999.Ar lowdelay , 2000.Ar netcontrol , 2001.Ar throughput , 2002.Ar reliability , 2003or one of the DiffServ Code Points: 2004.Ar ef , 2005.Ar va , 2006.Ar af11 No ... Ar af43 , 2007.Ar cs0 No ... Ar cs7 ; 2008or as either hex or decimal. 2009.Pp 2010For example, the following rules are identical: 2011.Bd -literal -offset indent 2012pass all tos lowdelay 2013pass all tos 0x10 2014pass all tos 16 2015.Ed 2016.It Ar allow-opts 2017By default, IPv4 packets with IP options or IPv6 packets with routing 2018extension headers are blocked. 2019When 2020.Ar allow-opts 2021is specified for a 2022.Ar pass 2023rule, packets that pass the filter based on that rule (last matching) 2024do so even if they contain IP options or routing extension headers. 2025For packets that match state, the rule that initially created the 2026state is used. 2027The implicit 2028.Ar pass 2029rule that is used when a packet does not match any rules does not 2030allow IP options. 2031.It Ar label Aq Ar string 2032Adds a label (name) to the rule, which can be used to identify the rule. 2033For instance, 2034pfctl -s labels 2035shows per-rule statistics for rules that have labels. 2036.Pp 2037The following macros can be used in labels: 2038.Pp 2039.Bl -tag -width $srcaddr -compact -offset indent 2040.It Ar $if 2041The interface. 2042.It Ar $srcaddr 2043The source IP address. 2044.It Ar $dstaddr 2045The destination IP address. 2046.It Ar $srcport 2047The source port specification. 2048.It Ar $dstport 2049The destination port specification. 2050.It Ar $proto 2051The protocol name. 2052.It Ar $nr 2053The rule number. 2054.El 2055.Pp 2056For example: 2057.Bd -literal -offset indent 2058ips = \&"{ 1.2.3.4, 1.2.3.5 }\&" 2059pass in proto tcp from any to $ips \e 2060 port \*(Gt 1023 label \&"$dstaddr:$dstport\&" 2061.Ed 2062.Pp 2063expands to 2064.Bd -literal -offset indent 2065pass in inet proto tcp from any to 1.2.3.4 \e 2066 port \*(Gt 1023 label \&"1.2.3.4:\*(Gt1023\&" 2067pass in inet proto tcp from any to 1.2.3.5 \e 2068 port \*(Gt 1023 label \&"1.2.3.5:\*(Gt1023\&" 2069.Ed 2070.Pp 2071The macro expansion for the 2072.Ar label 2073directive occurs only at configuration file parse time, not during runtime. 2074.It Ar ridentifier Aq Ar number 2075Add an identifier (number) to the rule, which can be used to correlate the rule 2076to pflog entries, even after ruleset updates. 2077.It Xo Ar queue Aq Ar queue 2078.No \*(Ba ( Aq Ar queue , 2079.Aq Ar queue ) 2080.Xc 2081Packets matching this rule will be assigned to the specified queue. 2082If two queues are given, packets which have a 2083.Em TOS 2084of 2085.Em lowdelay 2086and TCP ACKs with no data payload will be assigned to the second one. 2087See 2088.Sx QUEUEING 2089for setup details. 2090.Pp 2091For example: 2092.Bd -literal -offset indent 2093pass in proto tcp to port 25 queue mail 2094pass in proto tcp to port 22 queue(ssh_bulk, ssh_prio) 2095.Ed 2096.It Cm set prio Ar priority | Pq Ar priority , priority 2097Packets matching this rule will be assigned a specific queueing priority. 2098Priorities are assigned as integers 0 through 7. 2099If the packet is transmitted on a 2100.Xr vlan 4 2101interface, the queueing priority will be written as the priority 2102code point in the 802.1Q VLAN header. 2103If two priorities are given, packets which have a TOS of 2104.Cm lowdelay 2105and TCP ACKs with no data payload will be assigned to the second one. 2106.Pp 2107For example: 2108.Bd -literal -offset indent 2109pass in proto tcp to port 25 set prio 2 2110pass in proto tcp to port 22 set prio (2, 5) 2111.Ed 2112.It Ar tag Aq Ar string 2113Packets matching this rule will be tagged with the 2114specified string. 2115The tag acts as an internal marker that can be used to 2116identify these packets later on. 2117This can be used, for example, to provide trust between 2118interfaces and to determine if packets have been 2119processed by translation rules. 2120Tags are 2121.Qq sticky , 2122meaning that the packet will be tagged even if the rule 2123is not the last matching rule. 2124Further matching rules can replace the tag with a 2125new one but will not remove a previously applied tag. 2126A packet is only ever assigned one tag at a time. 2127Packet tagging can be done during 2128.Ar nat , 2129.Ar rdr , 2130.Ar binat 2131or 2132.Ar ether 2133rules in addition to filter rules. 2134Tags take the same macros as labels (see above). 2135.It Ar tagged Aq Ar string 2136Used with filter, translation or scrub rules 2137to specify that packets must already 2138be tagged with the given tag in order to match the rule. 2139Inverse tag matching can also be done 2140by specifying the 2141.Cm !\& 2142operator before the 2143.Ar tagged 2144keyword. 2145.It Ar rtable Aq Ar number 2146Used to select an alternate routing table for the routing lookup. 2147Only effective before the route lookup happened, i.e. when filtering inbound. 2148.It Xo Ar divert-to Aq Ar host 2149.Ar port Aq Ar port 2150.Xc 2151Used to 2152.Xr divert 4 2153packets to the given divert 2154.Ar port . 2155Historically 2156.Ox pf has another meaning for this, and 2157.Fx pf uses 2158this syntax to support 2159.Xr divert 4 instead. Hence, 2160.Ar host 2161has no meaning and can be set to anything like 127.0.0.1. 2162If a packet is re-injected and does not change direction then it will not be 2163re-diverted. 2164.It Ar divert-reply 2165It has no meaning in 2166.Fx pf . 2167.It Ar probability Aq Ar number 2168A probability attribute can be attached to a rule, with a value set between 21690 and 1, bounds not included. 2170In that case, the rule will be honoured using the given probability value 2171only. 2172For example, the following rule will drop 20% of incoming ICMP packets: 2173.Bd -literal -offset indent 2174block in proto icmp probability 20% 2175.Ed 2176.It Ar prio Aq Ar number 2177Only match packets which have the given queueing priority assigned. 2178.El 2179.Sh ROUTING 2180If a packet matches a rule with a route option set, the packet filter will 2181route the packet according to the type of route option. 2182When such a rule creates state, the route option is also applied to all 2183packets matching the same connection. 2184.Bl -tag -width xxxx 2185.It Ar route-to 2186The 2187.Ar route-to 2188option routes the packet to the specified interface with an optional address 2189for the next hop. 2190When a 2191.Ar route-to 2192rule creates state, only packets that pass in the same direction as the 2193filter rule specifies will be routed in this way. 2194Packets passing in the opposite direction (replies) are not affected 2195and are routed normally. 2196.It Ar reply-to 2197The 2198.Ar reply-to 2199option is similar to 2200.Ar route-to , 2201but routes packets that pass in the opposite direction (replies) to the 2202specified interface. 2203Opposite direction is only defined in the context of a state entry, and 2204.Ar reply-to 2205is useful only in rules that create state. 2206It can be used on systems with multiple external connections to 2207route all outgoing packets of a connection through the interface 2208the incoming connection arrived through (symmetric routing enforcement). 2209.It Ar dup-to 2210The 2211.Ar dup-to 2212option creates a duplicate of the packet and routes it like 2213.Ar route-to . 2214The original packet gets routed as it normally would. 2215.El 2216.Sh POOL OPTIONS 2217For 2218.Ar nat 2219and 2220.Ar rdr 2221rules, (as well as for the 2222.Ar route-to , 2223.Ar reply-to 2224and 2225.Ar dup-to 2226rule options) for which there is a single redirection address which has a 2227subnet mask smaller than 32 for IPv4 or 128 for IPv6 (more than one IP 2228address), a variety of different methods for assigning this address can be 2229used: 2230.Bl -tag -width xxxx 2231.It Ar bitmask 2232The 2233.Ar bitmask 2234option applies the network portion of the redirection address to the address 2235to be modified (source with 2236.Ar nat , 2237destination with 2238.Ar rdr ) . 2239.It Ar random 2240The 2241.Ar random 2242option selects an address at random within the defined block of addresses. 2243.It Ar source-hash 2244The 2245.Ar source-hash 2246option uses a hash of the source address to determine the redirection address, 2247ensuring that the redirection address is always the same for a given source. 2248An optional key can be specified after this keyword either in hex or as a 2249string; by default 2250.Xr pfctl 8 2251randomly generates a key for source-hash every time the 2252ruleset is reloaded. 2253.It Ar round-robin 2254The 2255.Ar round-robin 2256option loops through the redirection address(es). 2257.Pp 2258When more than one redirection address is specified, 2259.Ar round-robin 2260is the only permitted pool type. 2261.It Ar static-port 2262With 2263.Ar nat 2264rules, the 2265.Ar static-port 2266option prevents 2267.Xr pf 4 2268from modifying the source port on TCP and UDP packets. 2269.It Xo Ar map-e-portset Aq Ar psid-offset 2270.No / Aq Ar psid-len 2271.No / Aq Ar psid 2272.Xc 2273With 2274.Ar nat 2275rules, the 2276.Ar map-e-portset 2277option enables the source port translation of MAP-E (RFC 7597) Customer Edge. 2278In order to make the host act as a MAP-E Customer Edge, setting up a tunneling 2279interface and pass rules for encapsulated packets are required in addition 2280to the map-e-portset nat rule. 2281.Pp 2282For example: 2283.Bd -literal -offset indent 2284nat on $gif_mape_if from $int_if:network to any \e 2285 -> $ipv4_mape_src map-e-portset 6/8/0x34 2286.Ed 2287.Pp 2288sets PSID offset 6, PSID length 8, PSID 0x34. 2289.El 2290.Pp 2291Additionally, the 2292.Ar sticky-address 2293option can be specified to help ensure that multiple connections from the 2294same source are mapped to the same redirection address. 2295This option can be used with the 2296.Ar random 2297and 2298.Ar round-robin 2299pool options. 2300Note that by default these associations are destroyed as soon as there are 2301no longer states which refer to them; in order to make the mappings last 2302beyond the lifetime of the states, increase the global options with 2303.Ar set timeout src.track . 2304See 2305.Sx STATEFUL TRACKING OPTIONS 2306for more ways to control the source tracking. 2307.Sh STATE MODULATION 2308Much of the security derived from TCP is attributable to how well the 2309initial sequence numbers (ISNs) are chosen. 2310Some popular stack implementations choose 2311.Em very 2312poor ISNs and thus are normally susceptible to ISN prediction exploits. 2313By applying a 2314.Ar modulate state 2315rule to a TCP connection, 2316.Xr pf 4 2317will create a high quality random sequence number for each connection 2318endpoint. 2319.Pp 2320The 2321.Ar modulate state 2322directive implicitly keeps state on the rule and is 2323only applicable to TCP connections. 2324.Pp 2325For instance: 2326.Bd -literal -offset indent 2327block all 2328pass out proto tcp from any to any modulate state 2329pass in proto tcp from any to any port 25 flags S/SFRA modulate state 2330.Ed 2331.Pp 2332Note that modulated connections will not recover when the state table 2333is lost (firewall reboot, flushing the state table, etc...). 2334.Xr pf 4 2335will not be able to infer a connection again after the state table flushes 2336the connection's modulator. 2337When the state is lost, the connection may be left dangling until the 2338respective endpoints time out the connection. 2339It is possible on a fast local network for the endpoints to start an ACK 2340storm while trying to resynchronize after the loss of the modulator. 2341The default 2342.Ar flags 2343settings (or a more strict equivalent) should be used on 2344.Ar modulate state 2345rules to prevent ACK storms. 2346.Pp 2347Note that alternative methods are available 2348to prevent loss of the state table 2349and allow for firewall failover. 2350See 2351.Xr carp 4 2352and 2353.Xr pfsync 4 2354for further information. 2355.Sh SYN PROXY 2356By default, 2357.Xr pf 4 2358passes packets that are part of a 2359.Xr tcp 4 2360handshake between the endpoints. 2361The 2362.Ar synproxy state 2363option can be used to cause 2364.Xr pf 4 2365itself to complete the handshake with the active endpoint, perform a handshake 2366with the passive endpoint, and then forward packets between the endpoints. 2367.Pp 2368No packets are sent to the passive endpoint before the active endpoint has 2369completed the handshake, hence so-called SYN floods with spoofed source 2370addresses will not reach the passive endpoint, as the sender can't complete the 2371handshake. 2372.Pp 2373The proxy is transparent to both endpoints, they each see a single 2374connection from/to the other endpoint. 2375.Xr pf 4 2376chooses random initial sequence numbers for both handshakes. 2377Once the handshakes are completed, the sequence number modulators 2378(see previous section) are used to translate further packets of the 2379connection. 2380.Ar synproxy state 2381includes 2382.Ar modulate state . 2383.Pp 2384Rules with 2385.Ar synproxy 2386will not work if 2387.Xr pf 4 2388operates on a 2389.Xr bridge 4 . 2390.Pp 2391Example: 2392.Bd -literal -offset indent 2393pass in proto tcp from any to any port www synproxy state 2394.Ed 2395.Sh STATEFUL TRACKING OPTIONS 2396A number of options related to stateful tracking can be applied on a 2397per-rule basis. 2398.Ar keep state , 2399.Ar modulate state 2400and 2401.Ar synproxy state 2402support these options, and 2403.Ar keep state 2404must be specified explicitly to apply options to a rule. 2405.Pp 2406.Bl -tag -width xxxx -compact 2407.It Ar max Aq Ar number 2408Limits the number of concurrent states the rule may create. 2409When this limit is reached, further packets that would create 2410state will not match this rule until existing states time out. 2411.It Ar no-sync 2412Prevent state changes for states created by this rule from appearing on the 2413.Xr pfsync 4 2414interface. 2415.It Xo Aq Ar timeout 2416.Aq Ar seconds 2417.Xc 2418Changes the timeout values used for states created by this rule. 2419For a list of all valid timeout names, see 2420.Sx OPTIONS 2421above. 2422.It Ar sloppy 2423Uses a sloppy TCP connection tracker that does not check sequence 2424numbers at all, which makes insertion and ICMP teardown attacks way 2425easier. 2426This is intended to be used in situations where one does not see all 2427packets of a connection, e.g. in asymmetric routing situations. 2428Cannot be used with modulate or synproxy state. 2429.It Ar pflow 2430States created by this rule are exported on the 2431.Xr pflow 4 2432interface. 2433.El 2434.Pp 2435Multiple options can be specified, separated by commas: 2436.Bd -literal -offset indent 2437pass in proto tcp from any to any \e 2438 port www keep state \e 2439 (max 100, source-track rule, max-src-nodes 75, \e 2440 max-src-states 3, tcp.established 60, tcp.closing 5) 2441.Ed 2442.Pp 2443When the 2444.Ar source-track 2445keyword is specified, the number of states per source IP is tracked. 2446.Pp 2447.Bl -tag -width xxxx -compact 2448.It Ar source-track rule 2449The maximum number of states created by this rule is limited by the rule's 2450.Ar max-src-nodes 2451and 2452.Ar max-src-states 2453options. 2454Only state entries created by this particular rule count toward the rule's 2455limits. 2456.It Ar source-track global 2457The number of states created by all rules that use this option is limited. 2458Each rule can specify different 2459.Ar max-src-nodes 2460and 2461.Ar max-src-states 2462options, however state entries created by any participating rule count towards 2463each individual rule's limits. 2464.El 2465.Pp 2466The following limits can be set: 2467.Pp 2468.Bl -tag -width xxxx -compact 2469.It Ar max-src-nodes Aq Ar number 2470Limits the maximum number of source addresses which can simultaneously 2471have state table entries. 2472.It Ar max-src-states Aq Ar number 2473Limits the maximum number of simultaneous state entries that a single 2474source address can create with this rule. 2475.El 2476.Pp 2477For stateful TCP connections, limits on established connections (connections 2478which have completed the TCP 3-way handshake) can also be enforced 2479per source IP. 2480.Pp 2481.Bl -tag -width xxxx -compact 2482.It Ar max-src-conn Aq Ar number 2483Limits the maximum number of simultaneous TCP connections which have 2484completed the 3-way handshake that a single host can make. 2485.It Xo Ar max-src-conn-rate Aq Ar number 2486.No / Aq Ar seconds 2487.Xc 2488Limit the rate of new connections over a time interval. 2489The connection rate is an approximation calculated as a moving average. 2490.El 2491.Pp 2492Because the 3-way handshake ensures that the source address is not being 2493spoofed, more aggressive action can be taken based on these limits. 2494With the 2495.Ar overload Aq Ar table 2496state option, source IP addresses which hit either of the limits on 2497established connections will be added to the named table. 2498This table can be used in the ruleset to block further activity from 2499the offending host, redirect it to a tarpit process, or restrict its 2500bandwidth. 2501.Pp 2502The optional 2503.Ar flush 2504keyword kills all states created by the matching rule which originate 2505from the host which exceeds these limits. 2506The 2507.Ar global 2508modifier to the flush command kills all states originating from the 2509offending host, regardless of which rule created the state. 2510.Pp 2511For example, the following rules will protect the webserver against 2512hosts making more than 100 connections in 10 seconds. 2513Any host which connects faster than this rate will have its address added 2514to the 2515.Aq bad_hosts 2516table and have all states originating from it flushed. 2517Any new packets arriving from this host will be dropped unconditionally 2518by the block rule. 2519.Bd -literal -offset indent 2520block quick from \*(Ltbad_hosts\*(Gt 2521pass in on $ext_if proto tcp to $webserver port www keep state \e 2522 (max-src-conn-rate 100/10, overload \*(Ltbad_hosts\*(Gt flush global) 2523.Ed 2524.Sh OPERATING SYSTEM FINGERPRINTING 2525Passive OS Fingerprinting is a mechanism to inspect nuances of a TCP 2526connection's initial SYN packet and guess at the host's operating system. 2527Unfortunately these nuances are easily spoofed by an attacker so the 2528fingerprint is not useful in making security decisions. 2529But the fingerprint is typically accurate enough to make policy decisions 2530upon. 2531.Pp 2532The fingerprints may be specified by operating system class, by 2533version, or by subtype/patchlevel. 2534The class of an operating system is typically the vendor or genre 2535and would be 2536.Ox 2537for the 2538.Xr pf 4 2539firewall itself. 2540The version of the oldest available 2541.Ox 2542release on the main FTP site 2543would be 2.6 and the fingerprint would be written 2544.Pp 2545.Dl \&"OpenBSD 2.6\&" 2546.Pp 2547The subtype of an operating system is typically used to describe the 2548patchlevel if that patch led to changes in the TCP stack behavior. 2549In the case of 2550.Ox , 2551the only subtype is for a fingerprint that was 2552normalized by the 2553.Ar no-df 2554scrub option and would be specified as 2555.Pp 2556.Dl \&"OpenBSD 3.3 no-df\&" 2557.Pp 2558Fingerprints for most popular operating systems are provided by 2559.Xr pf.os 5 . 2560Once 2561.Xr pf 4 2562is running, a complete list of known operating system fingerprints may 2563be listed by running: 2564.Pp 2565.Dl # pfctl -so 2566.Pp 2567Filter rules can enforce policy at any level of operating system specification 2568assuming a fingerprint is present. 2569Policy could limit traffic to approved operating systems or even ban traffic 2570from hosts that aren't at the latest service pack. 2571.Pp 2572The 2573.Ar unknown 2574class can also be used as the fingerprint which will match packets for 2575which no operating system fingerprint is known. 2576.Pp 2577Examples: 2578.Bd -literal -offset indent 2579pass out proto tcp from any os OpenBSD 2580block out proto tcp from any os Doors 2581block out proto tcp from any os "Doors PT" 2582block out proto tcp from any os "Doors PT SP3" 2583block out from any os "unknown" 2584pass on lo0 proto tcp from any os "OpenBSD 3.3 lo0" 2585.Ed 2586.Pp 2587Operating system fingerprinting is limited only to the TCP SYN packet. 2588This means that it will not work on other protocols and will not match 2589a currently established connection. 2590.Pp 2591Caveat: operating system fingerprints are occasionally wrong. 2592There are three problems: an attacker can trivially craft his packets to 2593appear as any operating system he chooses; 2594an operating system patch could change the stack behavior and no fingerprints 2595will match it until the database is updated; 2596and multiple operating systems may have the same fingerprint. 2597.Sh BLOCKING SPOOFED TRAFFIC 2598"Spoofing" is the faking of IP addresses, typically for malicious 2599purposes. 2600The 2601.Ar antispoof 2602directive expands to a set of filter rules which will block all 2603traffic with a source IP from the network(s) directly connected 2604to the specified interface(s) from entering the system through 2605any other interface. 2606.Pp 2607For example, the line 2608.Bd -literal -offset indent 2609antispoof for lo0 2610.Ed 2611.Pp 2612expands to 2613.Bd -literal -offset indent 2614block drop in on ! lo0 inet from 127.0.0.1/8 to any 2615block drop in on ! lo0 inet6 from ::1 to any 2616.Ed 2617.Pp 2618For non-loopback interfaces, there are additional rules to block incoming 2619packets with a source IP address identical to the interface's IP(s). 2620For example, assuming the interface wi0 had an IP address of 10.0.0.1 and a 2621netmask of 255.255.255.0, 2622the line 2623.Bd -literal -offset indent 2624antispoof for wi0 inet 2625.Ed 2626.Pp 2627expands to 2628.Bd -literal -offset indent 2629block drop in on ! wi0 inet from 10.0.0.0/24 to any 2630block drop in inet from 10.0.0.1 to any 2631.Ed 2632.Pp 2633Caveat: Rules created by the 2634.Ar antispoof 2635directive interfere with packets sent over loopback interfaces 2636to local addresses. 2637One should pass these explicitly. 2638.Sh FRAGMENT HANDLING 2639The size of IP datagrams (packets) can be significantly larger than the 2640maximum transmission unit (MTU) of the network. 2641In cases when it is necessary or more efficient to send such large packets, 2642the large packet will be fragmented into many smaller packets that will each 2643fit onto the wire. 2644Unfortunately for a firewalling device, only the first logical fragment will 2645contain the necessary header information for the subprotocol that allows 2646.Xr pf 4 2647to filter on things such as TCP ports or to perform NAT. 2648.Pp 2649Besides the use of 2650.Ar set reassemble 2651option or 2652.Ar scrub 2653rules as described in 2654.Sx TRAFFIC NORMALIZATION 2655above, there are three options for handling fragments in the packet filter. 2656.Pp 2657One alternative is to filter individual fragments with filter rules. 2658If no 2659.Ar scrub 2660rule applies to a fragment or 2661.Ar set reassemble 2662is set to 2663.Cm no 2664, it is passed to the filter. 2665Filter rules with matching IP header parameters decide whether the 2666fragment is passed or blocked, in the same way as complete packets 2667are filtered. 2668Without reassembly, fragments can only be filtered based on IP header 2669fields (source/destination address, protocol), since subprotocol header 2670fields are not available (TCP/UDP port numbers, ICMP code/type). 2671The 2672.Ar fragment 2673option can be used to restrict filter rules to apply only to 2674fragments, but not complete packets. 2675Filter rules without the 2676.Ar fragment 2677option still apply to fragments, if they only specify IP header fields. 2678For instance, the rule 2679.Bd -literal -offset indent 2680pass in proto tcp from any to any port 80 2681.Ed 2682.Pp 2683never applies to a fragment, even if the fragment is part of a TCP 2684packet with destination port 80, because without reassembly this information 2685is not available for each fragment. 2686This also means that fragments cannot create new or match existing 2687state table entries, which makes stateful filtering and address 2688translation (NAT, redirection) for fragments impossible. 2689.Pp 2690It's also possible to reassemble only certain fragments by specifying 2691source or destination addresses or protocols as parameters in 2692.Ar scrub 2693rules. 2694.Pp 2695In most cases, the benefits of reassembly outweigh the additional 2696memory cost, and it's recommended to use 2697.Ar set reassemble 2698option or 2699.Ar scrub 2700rules with the 2701.Ar fragment reassemble 2702modifier to reassemble 2703all fragments. 2704.Pp 2705The memory allocated for fragment caching can be limited using 2706.Xr pfctl 8 . 2707Once this limit is reached, fragments that would have to be cached 2708are dropped until other entries time out. 2709The timeout value can also be adjusted. 2710.Pp 2711When forwarding reassembled IPv6 packets, pf refragments them with 2712the original maximum fragment size. 2713This allows the sender to determine the optimal fragment size by 2714path MTU discovery. 2715.Sh ANCHORS 2716Besides the main ruleset, 2717.Xr pfctl 8 2718can load rulesets into 2719.Ar anchor 2720attachment points. 2721An 2722.Ar anchor 2723is a container that can hold rules, address tables, and other anchors. 2724.Pp 2725An 2726.Ar anchor 2727has a name which specifies the path where 2728.Xr pfctl 8 2729can be used to access the anchor to perform operations on it, such as 2730attaching child anchors to it or loading rules into it. 2731Anchors may be nested, with components separated by 2732.Sq / 2733characters, similar to how file system hierarchies are laid out. 2734The main ruleset is actually the default anchor, so filter and 2735translation rules, for example, may also be contained in any anchor. 2736.Pp 2737An anchor can reference another 2738.Ar anchor 2739attachment point 2740using the following kinds 2741of rules: 2742.Bl -tag -width xxxx 2743.It Ar nat-anchor Aq Ar name 2744Evaluates the 2745.Ar nat 2746rules in the specified 2747.Ar anchor . 2748.It Ar rdr-anchor Aq Ar name 2749Evaluates the 2750.Ar rdr 2751rules in the specified 2752.Ar anchor . 2753.It Ar binat-anchor Aq Ar name 2754Evaluates the 2755.Ar binat 2756rules in the specified 2757.Ar anchor . 2758.It Ar anchor Aq Ar name 2759Evaluates the filter rules in the specified 2760.Ar anchor . 2761.It Xo Ar load anchor 2762.Aq Ar name 2763.Ar from Aq Ar file 2764.Xc 2765Loads the rules from the specified file into the 2766anchor 2767.Ar name . 2768.El 2769.Pp 2770When evaluation of the main ruleset reaches an 2771.Ar anchor 2772rule, 2773.Xr pf 4 2774will proceed to evaluate all rules specified in that anchor. 2775.Pp 2776Matching filter and translation rules marked with the 2777.Ar quick 2778option are final and abort the evaluation of the rules in other 2779anchors and the main ruleset. 2780If the 2781.Ar anchor 2782itself is marked with the 2783.Ar quick 2784option, 2785ruleset evaluation will terminate when the anchor is exited if the packet is 2786matched by any rule within the anchor. 2787.Pp 2788.Ar anchor 2789rules are evaluated relative to the anchor in which they are contained. 2790For example, all 2791.Ar anchor 2792rules specified in the main ruleset will reference anchor 2793attachment points underneath the main ruleset, and 2794.Ar anchor 2795rules specified in a file loaded from a 2796.Ar load anchor 2797rule will be attached under that anchor point. 2798.Pp 2799Rules may be contained in 2800.Ar anchor 2801attachment points which do not contain any rules when the main ruleset 2802is loaded, and later such anchors can be manipulated through 2803.Xr pfctl 8 2804without reloading the main ruleset or other anchors. 2805For example, 2806.Bd -literal -offset indent 2807ext_if = \&"kue0\&" 2808block on $ext_if all 2809anchor spam 2810pass out on $ext_if all 2811pass in on $ext_if proto tcp from any \e 2812 to $ext_if port smtp 2813.Ed 2814.Pp 2815blocks all packets on the external interface by default, then evaluates 2816all rules in the 2817.Ar anchor 2818named "spam", and finally passes all outgoing connections and 2819incoming connections to port 25. 2820.Bd -literal -offset indent 2821# echo \&"block in quick from 1.2.3.4 to any\&" \&| \e 2822 pfctl -a spam -f - 2823.Ed 2824.Pp 2825This loads a single rule into the 2826.Ar anchor , 2827which blocks all packets from a specific address. 2828.Pp 2829The anchor can also be populated by adding a 2830.Ar load anchor 2831rule after the 2832.Ar anchor 2833rule: 2834.Bd -literal -offset indent 2835anchor spam 2836load anchor spam from "/etc/pf-spam.conf" 2837.Ed 2838.Pp 2839When 2840.Xr pfctl 8 2841loads 2842.Nm pf.conf , 2843it will also load all the rules from the file 2844.Pa /etc/pf-spam.conf 2845into the anchor. 2846.Pp 2847Optionally, 2848.Ar anchor 2849rules can specify packet filtering parameters using the same syntax as 2850filter rules. 2851When parameters are used, the 2852.Ar anchor 2853rule is only evaluated for matching packets. 2854This allows conditional evaluation of anchors, like: 2855.Bd -literal -offset indent 2856block on $ext_if all 2857anchor spam proto tcp from any to any port smtp 2858pass out on $ext_if all 2859pass in on $ext_if proto tcp from any to $ext_if port smtp 2860.Ed 2861.Pp 2862The rules inside 2863.Ar anchor 2864spam are only evaluated for 2865.Ar tcp 2866packets with destination port 25. 2867Hence, 2868.Bd -literal -offset indent 2869# echo \&"block in quick from 1.2.3.4 to any" \&| \e 2870 pfctl -a spam -f - 2871.Ed 2872.Pp 2873will only block connections from 1.2.3.4 to port 25. 2874.Pp 2875Anchors may end with the asterisk 2876.Pq Sq * 2877character, which signifies that all anchors attached at that point 2878should be evaluated in the alphabetical ordering of their anchor name. 2879For example, 2880.Bd -literal -offset indent 2881anchor "spam/*" 2882.Ed 2883.Pp 2884will evaluate each rule in each anchor attached to the 2885.Li spam 2886anchor. 2887Note that it will only evaluate anchors that are directly attached to the 2888.Li spam 2889anchor, and will not descend to evaluate anchors recursively. 2890.Pp 2891Since anchors are evaluated relative to the anchor in which they are 2892contained, there is a mechanism for accessing the parent and ancestor 2893anchors of a given anchor. 2894Similar to file system path name resolution, if the sequence 2895.Dq .. 2896appears as an anchor path component, the parent anchor of the current 2897anchor in the path evaluation at that point will become the new current 2898anchor. 2899As an example, consider the following: 2900.Bd -literal -offset indent 2901# echo ' anchor "spam/allowed" ' | pfctl -f - 2902# echo -e ' anchor "../banned" \en pass' | \e 2903 pfctl -a spam/allowed -f - 2904.Ed 2905.Pp 2906Evaluation of the main ruleset will lead into the 2907.Li spam/allowed 2908anchor, which will evaluate the rules in the 2909.Li spam/banned 2910anchor, if any, before finally evaluating the 2911.Ar pass 2912rule. 2913.Pp 2914Filter rule 2915.Ar anchors 2916can also be loaded inline in the ruleset within a brace ('{' '}') delimited 2917block. 2918Brace delimited blocks may contain rules or other brace-delimited blocks. 2919When anchors are loaded this way the anchor name becomes optional. 2920.Bd -literal -offset indent 2921anchor "external" on $ext_if { 2922 block 2923 anchor out { 2924 pass proto tcp from any to port { 25, 80, 443 } 2925 } 2926 pass in proto tcp to any port 22 2927} 2928.Ed 2929.Pp 2930Since the parser specification for anchor names is a string, any 2931reference to an anchor name containing 2932.Sq / 2933characters will require double quote 2934.Pq Sq \&" 2935characters around the anchor name. 2936.Sh SCTP CONSIDERATIONS 2937.Xr pf 4 2938supports 2939.Xr sctp 4 2940connections. 2941It can match ports, track state and NAT SCTP traffic. 2942However, it will not alter port numbers during nat or rdr translations. 2943Doing so would break SCTP multihoming. 2944.Sh TRANSLATION EXAMPLES 2945This example maps incoming requests on port 80 to port 8080, on 2946which a daemon is running (because, for example, it is not run as root, 2947and therefore lacks permission to bind to port 80). 2948.Bd -literal 2949# use a macro for the interface name, so it can be changed easily 2950ext_if = \&"ne3\&" 2951 2952# map daemon on 8080 to appear to be on 80 2953rdr on $ext_if proto tcp from any to any port 80 -\*(Gt 127.0.0.1 port 8080 2954.Ed 2955.Pp 2956If the 2957.Ar pass 2958modifier is given, packets matching the translation rule are passed without 2959inspecting the filter rules: 2960.Bd -literal 2961rdr pass on $ext_if proto tcp from any to any port 80 -\*(Gt 127.0.0.1 \e 2962 port 8080 2963.Ed 2964.Pp 2965In the example below, vlan12 is configured as 192.168.168.1; 2966the machine translates all packets coming from 192.168.168.0/24 to 204.92.77.111 2967when they are going out any interface except vlan12. 2968This has the net effect of making traffic from the 192.168.168.0/24 2969network appear as though it is the Internet routable address 2970204.92.77.111 to nodes behind any interface on the router except 2971for the nodes on vlan12. 2972(Thus, 192.168.168.1 can talk to the 192.168.168.0/24 nodes.) 2973.Bd -literal 2974nat on ! vlan12 from 192.168.168.0/24 to any -\*(Gt 204.92.77.111 2975.Ed 2976.Pp 2977In the example below, the machine sits between a fake internal 144.19.74.* 2978network, and a routable external IP of 204.92.77.100. 2979The 2980.Ar no nat 2981rule excludes protocol AH from being translated. 2982.Bd -literal 2983# NO NAT 2984no nat on $ext_if proto ah from 144.19.74.0/24 to any 2985nat on $ext_if from 144.19.74.0/24 to any -\*(Gt 204.92.77.100 2986.Ed 2987.Pp 2988In the example below, packets bound for one specific server, as well as those 2989generated by the sysadmins are not proxied; all other connections are. 2990.Bd -literal 2991# NO RDR 2992no rdr on $int_if proto { tcp, udp } from any to $server port 80 2993no rdr on $int_if proto { tcp, udp } from $sysadmins to any port 80 2994rdr on $int_if proto { tcp, udp } from any to any port 80 -\*(Gt 127.0.0.1 \e 2995 port 80 2996.Ed 2997.Pp 2998This longer example uses both a NAT and a redirection. 2999The external interface has the address 157.161.48.183. 3000On localhost, we are running 3001.Xr ftp-proxy 8 , 3002waiting for FTP sessions to be redirected to it. 3003The three mandatory anchors for 3004.Xr ftp-proxy 8 3005are omitted from this example; see the 3006.Xr ftp-proxy 8 3007manpage. 3008.Bd -literal 3009# NAT 3010# Translate outgoing packets' source addresses (any protocol). 3011# In this case, any address but the gateway's external address is mapped. 3012nat on $ext_if inet from ! ($ext_if) to any -\*(Gt ($ext_if) 3013 3014# NAT PROXYING 3015# Map outgoing packets' source port to an assigned proxy port instead of 3016# an arbitrary port. 3017# In this case, proxy outgoing isakmp with port 500 on the gateway. 3018nat on $ext_if inet proto udp from any port = isakmp to any -\*(Gt ($ext_if) \e 3019 port 500 3020 3021# BINAT 3022# Translate outgoing packets' source address (any protocol). 3023# Translate incoming packets' destination address to an internal machine 3024# (bidirectional). 3025binat on $ext_if from 10.1.2.150 to any -\*(Gt $ext_if 3026 3027# Translate packets arriving on $peer_if addressed to 172.22.16.0/20 3028# to the corresponding address in 172.21.16.0/20 (bidirectional). 3029binat on $peer_if from 172.21.16.0/20 to any -> 172.22.16.0/20 3030 3031# RDR 3032# Translate incoming packets' destination addresses. 3033# As an example, redirect a TCP and UDP port to an internal machine. 3034rdr on $ext_if inet proto tcp from any to ($ext_if) port 8080 \e 3035 -\*(Gt 10.1.2.151 port 22 3036rdr on $ext_if inet proto udp from any to ($ext_if) port 8080 \e 3037 -\*(Gt 10.1.2.151 port 53 3038 3039# RDR 3040# Translate outgoing ftp control connections to send them to localhost 3041# for proxying with ftp-proxy(8) running on port 8021. 3042rdr on $int_if proto tcp from any to any port 21 -\*(Gt 127.0.0.1 port 8021 3043.Ed 3044.Pp 3045In this example, a NAT gateway is set up to translate internal addresses 3046using a pool of public addresses (192.0.2.16/28) and to redirect 3047incoming web server connections to a group of web servers on the internal 3048network. 3049.Bd -literal 3050# NAT LOAD BALANCE 3051# Translate outgoing packets' source addresses using an address pool. 3052# A given source address is always translated to the same pool address by 3053# using the source-hash keyword. 3054nat on $ext_if inet from any to any -\*(Gt 192.0.2.16/28 source-hash 3055 3056# RDR ROUND ROBIN 3057# Translate incoming web server connections to a group of web servers on 3058# the internal network. 3059rdr on $ext_if proto tcp from any to any port 80 \e 3060 -\*(Gt { 10.1.2.155, 10.1.2.160, 10.1.2.161 } round-robin 3061.Ed 3062.Sh FILTER EXAMPLES 3063.Bd -literal 3064# The external interface is kue0 3065# (157.161.48.183, the only routable address) 3066# and the private network is 10.0.0.0/8, for which we are doing NAT. 3067 3068# Reassemble incoming traffic 3069set reassemble yes 3070 3071# use a macro for the interface name, so it can be changed easily 3072ext_if = \&"kue0\&" 3073 3074# block and log everything by default 3075block return log on $ext_if all 3076 3077# block anything coming from source we have no back routes for 3078block in from no-route to any 3079 3080# block packets whose ingress interface does not match the one in 3081# the route back to their source address 3082block in from urpf-failed to any 3083 3084# block and log outgoing packets that do not have our address as source, 3085# they are either spoofed or something is misconfigured (NAT disabled, 3086# for instance), we want to be nice and do not send out garbage. 3087block out log quick on $ext_if from ! 157.161.48.183 to any 3088 3089# silently drop broadcasts (cable modem noise) 3090block in quick on $ext_if from any to 255.255.255.255 3091 3092# block and log incoming packets from reserved address space and invalid 3093# addresses, they are either spoofed or misconfigured, we cannot reply to 3094# them anyway (hence, no return-rst). 3095block in log quick on $ext_if from { 10.0.0.0/8, 172.16.0.0/12, \e 3096 192.168.0.0/16, 255.255.255.255/32 } to any 3097 3098# ICMP 3099 3100# pass out/in certain ICMP queries and keep state (ping) 3101# state matching is done on host addresses and ICMP id (not type/code), 3102# so replies (like 0/0 for 8/0) will match queries 3103# ICMP error messages (which always refer to a TCP/UDP packet) are 3104# handled by the TCP/UDP states 3105pass on $ext_if inet proto icmp all icmp-type 8 code 0 3106 3107# UDP 3108 3109# pass out all UDP connections and keep state 3110pass out on $ext_if proto udp all 3111 3112# pass in certain UDP connections and keep state (DNS) 3113pass in on $ext_if proto udp from any to any port domain 3114 3115# TCP 3116 3117# pass out all TCP connections and modulate state 3118pass out on $ext_if proto tcp all modulate state 3119 3120# pass in certain TCP connections and keep state (SSH, SMTP, DNS, IDENT) 3121pass in on $ext_if proto tcp from any to any port { ssh, smtp, domain, \e 3122 auth } 3123 3124# Do not allow Windows 9x SMTP connections since they are typically 3125# a viral worm. Alternately we could limit these OSes to 1 connection each. 3126block in on $ext_if proto tcp from any os {"Windows 95", "Windows 98"} \e 3127 to any port smtp 3128 3129# IPv6 3130# pass in/out all IPv6 traffic: note that we have to enable this in two 3131# different ways, on both our physical interface and our tunnel 3132pass quick on gif0 inet6 3133pass quick on $ext_if proto ipv6 3134 3135# Packet Tagging 3136 3137# three interfaces: $int_if, $ext_if, and $wifi_if (wireless). NAT is 3138# being done on $ext_if for all outgoing packets. tag packets in on 3139# $int_if and pass those tagged packets out on $ext_if. all other 3140# outgoing packets (i.e., packets from the wireless network) are only 3141# permitted to access port 80. 3142 3143pass in on $int_if from any to any tag INTNET 3144pass in on $wifi_if from any to any 3145 3146block out on $ext_if from any to any 3147pass out quick on $ext_if tagged INTNET 3148pass out on $ext_if proto tcp from any to any port 80 3149 3150# tag incoming packets as they are redirected to spamd(8). use the tag 3151# to pass those packets through the packet filter. 3152 3153rdr on $ext_if inet proto tcp from \*(Ltspammers\*(Gt to port smtp \e 3154 tag SPAMD -\*(Gt 127.0.0.1 port spamd 3155 3156block in on $ext_if 3157pass in on $ext_if inet proto tcp tagged SPAMD 3158.Ed 3159.Sh GRAMMAR 3160Syntax for 3161.Nm 3162in BNF: 3163.Bd -literal 3164line = ( option | ether-rule | pf-rule | nat-rule | binat-rule | 3165 rdr-rule | antispoof-rule | altq-rule | queue-rule | 3166 trans-anchors | anchor-rule | anchor-close | load-anchor | 3167 table-rule | include ) 3168 3169option = "set" ( [ "timeout" ( timeout | "{" timeout-list "}" ) ] | 3170 [ "ruleset-optimization" [ "none" | "basic" | "profile" ]] | 3171 [ "optimization" [ "default" | "normal" | 3172 "high-latency" | "satellite" | 3173 "aggressive" | "conservative" ] ] 3174 [ "limit" ( limit-item | "{" limit-list "}" ) ] | 3175 [ "loginterface" ( interface-name | "none" ) ] | 3176 [ "block-policy" ( "drop" | "return" ) ] | 3177 [ "state-policy" ( "if-bound" | "floating" ) ] 3178 [ "state-defaults" state-opts ] 3179 [ "require-order" ( "yes" | "no" ) ] 3180 [ "fingerprints" filename ] | 3181 [ "skip on" ifspec ] | 3182 [ "debug" ( "none" | "urgent" | "misc" | "loud" ) ] 3183 [ "keepcounters" ] ) 3184 3185ether-rule = "ether" etheraction [ ( "in" | "out" ) ] 3186 [ "quick" ] [ "on" ifspec ] [ "bridge-to" interface-name ] 3187 [ etherprotospec ] etherhosts [ "l3" hosts ] 3188 [ etherfilteropt-list ] 3189 3190pf-rule = action [ ( "in" | "out" ) ] 3191 [ "log" [ "(" logopts ")"] ] [ "quick" ] 3192 [ "on" ifspec ] [ route ] [ af ] [ protospec ] 3193 hosts [ filteropt-list ] 3194 3195logopts = logopt [ "," logopts ] 3196logopt = "all" | "user" | "to" interface-name 3197 3198etherfilteropt-list = etherfilteropt-list etherfilteropt | etherfilteropt 3199etherfilteropt = "tag" string | "tagged" string | "queue" ( string ) | 3200 "ridentifier" number | "label" string 3201 3202filteropt-list = filteropt-list filteropt | filteropt 3203filteropt = user | group | flags | icmp-type | icmp6-type | "tos" tos | 3204 ( "no" | "keep" | "modulate" | "synproxy" ) "state" 3205 [ "(" state-opts ")" ] | 3206 "fragment" | "no-df" | "min-ttl" number | "set-tos" tos | 3207 "max-mss" number | "random-id" | "reassemble tcp" | 3208 fragmentation | "allow-opts" | 3209 "label" string | "tag" string | [ ! ] "tagged" string | 3210 "set prio" ( number | "(" number [ [ "," ] number ] ")" ) | 3211 "queue" ( string | "(" string [ [ "," ] string ] ")" ) | 3212 "rtable" number | "probability" number"%" | "prio" number | 3213 "dnpipe" ( number | "(" number "," number ")" ) | 3214 "dnqueue" ( number | "(" number "," number ")" ) | 3215 "ridentifier" number 3216 3217nat-rule = [ "no" ] "nat" [ "pass" [ "log" [ "(" logopts ")" ] ] ] 3218 [ "on" ifspec ] [ af ] 3219 [ protospec ] hosts [ "tag" string ] [ "tagged" string ] 3220 [ "-\*(Gt" ( redirhost | "{" redirhost-list "}" ) 3221 [ portspec ] [ pooltype ] [ "static-port" ] 3222 [ "map-e-portset" number "/" number "/" number ] ] 3223 3224binat-rule = [ "no" ] "binat" [ "pass" [ "log" [ "(" logopts ")" ] ] ] 3225 [ "on" interface-name ] [ af ] 3226 [ "proto" ( proto-name | proto-number ) ] 3227 "from" address [ "/" mask-bits ] "to" ipspec 3228 [ "tag" string ] [ "tagged" string ] 3229 [ "-\*(Gt" address [ "/" mask-bits ] ] 3230 3231rdr-rule = [ "no" ] "rdr" [ "pass" [ "log" [ "(" logopts ")" ] ] ] 3232 [ "on" ifspec ] [ af ] 3233 [ protospec ] hosts [ "tag" string ] [ "tagged" string ] 3234 [ "-\*(Gt" ( redirhost | "{" redirhost-list "}" ) 3235 [ portspec ] [ pooltype ] ] 3236 3237antispoof-rule = "antispoof" [ "log" ] [ "quick" ] 3238 "for" ifspec [ af ] [ "label" string ] 3239 [ "ridentifier" number ] 3240 3241table-rule = "table" "\*(Lt" string "\*(Gt" [ tableopts-list ] 3242tableopts-list = tableopts-list tableopts | tableopts 3243tableopts = "persist" | "const" | "counters" | "file" string | 3244 "{" [ tableaddr-list ] "}" 3245tableaddr-list = tableaddr-list [ "," ] tableaddr-spec | tableaddr-spec 3246tableaddr-spec = [ "!" ] tableaddr [ "/" mask-bits ] 3247tableaddr = hostname | ifspec | "self" | 3248 ipv4-dotted-quad | ipv6-coloned-hex 3249 3250altq-rule = "altq on" interface-name queueopts-list 3251 "queue" subqueue 3252queue-rule = "queue" string [ "on" interface-name ] queueopts-list 3253 subqueue 3254 3255anchor-rule = "anchor" [ string ] [ ( "in" | "out" ) ] [ "on" ifspec ] 3256 [ af ] [ protospec ] [ hosts ] [ filteropt-list ] [ "{" ] 3257 3258anchor-close = "}" 3259 3260trans-anchors = ( "nat-anchor" | "rdr-anchor" | "binat-anchor" ) string 3261 [ "on" ifspec ] [ af ] [ "proto" ] [ protospec ] [ hosts ] 3262 3263load-anchor = "load anchor" string "from" filename 3264 3265queueopts-list = queueopts-list queueopts | queueopts 3266queueopts = [ "bandwidth" bandwidth-spec ] | 3267 [ "qlimit" number ] | [ "tbrsize" number ] | 3268 [ "priority" number ] | [ schedulers ] 3269schedulers = ( cbq-def | priq-def | hfsc-def ) 3270bandwidth-spec = "number" ( "b" | "Kb" | "Mb" | "Gb" | "%" ) 3271 3272etheraction = "pass" | "block" 3273action = "pass" | "match" | "block" [ return ] | [ "no" ] "scrub" 3274return = "drop" | "return" | "return-rst" [ "( ttl" number ")" ] | 3275 "return-icmp" [ "(" icmpcode [ [ "," ] icmp6code ] ")" ] | 3276 "return-icmp6" [ "(" icmp6code ")" ] 3277icmpcode = ( icmp-code-name | icmp-code-number ) 3278icmp6code = ( icmp6-code-name | icmp6-code-number ) 3279 3280ifspec = ( [ "!" ] ( interface-name | interface-group ) ) | 3281 "{" interface-list "}" 3282interface-list = [ "!" ] ( interface-name | interface-group ) 3283 [ [ "," ] interface-list ] 3284route = ( "route-to" | "reply-to" | "dup-to" ) 3285 ( routehost | "{" routehost-list "}" ) 3286 [ pooltype ] 3287af = "inet" | "inet6" 3288 3289etherprotospec = "proto" ( proto-number | "{" etherproto-list "}" ) 3290etherproto-list = proto-number [ [ "," ] etherproto-list ] 3291protospec = "proto" ( proto-name | proto-number | 3292 "{" proto-list "}" ) 3293proto-list = ( proto-name | proto-number ) [ [ "," ] proto-list ] 3294 3295etherhosts = "from" macaddress "to" macaddress 3296macaddress = mac | mac "/" masklen | mac "&" mask 3297 3298hosts = "all" | 3299 "from" ( "any" | "no-route" | "urpf-failed" | "self" | host | 3300 "{" host-list "}" ) [ port ] [ os ] 3301 "to" ( "any" | "no-route" | "self" | host | 3302 "{" host-list "}" ) [ port ] 3303 3304ipspec = "any" | host | "{" host-list "}" 3305host = [ "!" ] ( address [ "/" mask-bits ] | "\*(Lt" string "\*(Gt" ) 3306redirhost = address [ "/" mask-bits ] 3307routehost = "(" interface-name [ address [ "/" mask-bits ] ] ")" 3308address = ( interface-name | interface-group | 3309 "(" ( interface-name | interface-group ) ")" | 3310 hostname | ipv4-dotted-quad | ipv6-coloned-hex ) 3311host-list = host [ [ "," ] host-list ] 3312redirhost-list = redirhost [ [ "," ] redirhost-list ] 3313routehost-list = routehost [ [ "," ] routehost-list ] 3314 3315port = "port" ( unary-op | binary-op | "{" op-list "}" ) 3316portspec = "port" ( number | name ) [ ":" ( "*" | number | name ) ] 3317os = "os" ( os-name | "{" os-list "}" ) 3318user = "user" ( unary-op | binary-op | "{" op-list "}" ) 3319group = "group" ( unary-op | binary-op | "{" op-list "}" ) 3320 3321unary-op = [ "=" | "!=" | "\*(Lt" | "\*(Le" | "\*(Gt" | "\*(Ge" ] 3322 ( name | number ) 3323binary-op = number ( "\*(Lt\*(Gt" | "\*(Gt\*(Lt" | ":" ) number 3324op-list = ( unary-op | binary-op ) [ [ "," ] op-list ] 3325 3326os-name = operating-system-name 3327os-list = os-name [ [ "," ] os-list ] 3328 3329flags = "flags" ( [ flag-set ] "/" flag-set | "any" ) 3330flag-set = [ "F" ] [ "S" ] [ "R" ] [ "P" ] [ "A" ] [ "U" ] [ "E" ] 3331 [ "W" ] 3332 3333icmp-type = "icmp-type" ( icmp-type-code | "{" icmp-list "}" ) 3334icmp6-type = "icmp6-type" ( icmp-type-code | "{" icmp-list "}" ) 3335icmp-type-code = ( icmp-type-name | icmp-type-number ) 3336 [ "code" ( icmp-code-name | icmp-code-number ) ] 3337icmp-list = icmp-type-code [ [ "," ] icmp-list ] 3338 3339tos = ( "lowdelay" | "throughput" | "reliability" | 3340 [ "0x" ] number ) 3341 3342state-opts = state-opt [ [ "," ] state-opts ] 3343state-opt = ( "max" number | "no-sync" | timeout | "sloppy" | 3344 "source-track" [ ( "rule" | "global" ) ] | 3345 "max-src-nodes" number | "max-src-states" number | 3346 "max-src-conn" number | 3347 "max-src-conn-rate" number "/" number | 3348 "overload" "\*(Lt" string "\*(Gt" [ "flush" ] | 3349 "if-bound" | "floating" | "pflow" ) 3350 3351fragmentation = [ "fragment reassemble" ] 3352 3353timeout-list = timeout [ [ "," ] timeout-list ] 3354timeout = ( "tcp.first" | "tcp.opening" | "tcp.established" | 3355 "tcp.closing" | "tcp.finwait" | "tcp.closed" | 3356 "sctp.first" | "sctp.opening" | "sctp.established" | 3357 "sctp.closing" | "sctp.closed" | 3358 "udp.first" | "udp.single" | "udp.multiple" | 3359 "icmp.first" | "icmp.error" | 3360 "other.first" | "other.single" | "other.multiple" | 3361 "frag" | "interval" | "src.track" | 3362 "adaptive.start" | "adaptive.end" ) number 3363 3364limit-list = limit-item [ [ "," ] limit-list ] 3365limit-item = ( "states" | "frags" | "src-nodes" ) number 3366 3367pooltype = ( "bitmask" | "random" | 3368 "source-hash" [ ( hex-key | string-key ) ] | 3369 "round-robin" ) [ sticky-address ] 3370 3371subqueue = string | "{" queue-list "}" 3372queue-list = string [ [ "," ] string ] 3373cbq-def = "cbq" [ "(" cbq-opt [ [ "," ] cbq-opt ] ")" ] 3374priq-def = "priq" [ "(" priq-opt [ [ "," ] priq-opt ] ")" ] 3375hfsc-def = "hfsc" [ "(" hfsc-opt [ [ "," ] hfsc-opt ] ")" ] 3376cbq-opt = ( "default" | "borrow" | "red" | "ecn" | "rio" ) 3377priq-opt = ( "default" | "red" | "ecn" | "rio" ) 3378hfsc-opt = ( "default" | "red" | "ecn" | "rio" | 3379 linkshare-sc | realtime-sc | upperlimit-sc ) 3380linkshare-sc = "linkshare" sc-spec 3381realtime-sc = "realtime" sc-spec 3382upperlimit-sc = "upperlimit" sc-spec 3383sc-spec = ( bandwidth-spec | 3384 "(" bandwidth-spec number bandwidth-spec ")" ) 3385include = "include" filename 3386.Ed 3387.Sh FILES 3388.Bl -tag -width "/etc/protocols" -compact 3389.It Pa /etc/hosts 3390Host name database. 3391.It Pa /etc/pf.conf 3392Default location of the ruleset file. 3393The file has to be created manually as it is not installed with a 3394standard installation. 3395.It Pa /etc/pf.os 3396Default location of OS fingerprints. 3397.It Pa /etc/protocols 3398Protocol name database. 3399.It Pa /etc/services 3400Service name database. 3401.El 3402.Sh SEE ALSO 3403.Xr altq 4 , 3404.Xr carp 4 , 3405.Xr icmp 4 , 3406.Xr icmp6 4 , 3407.Xr ip 4 , 3408.Xr ip6 4 , 3409.Xr pf 4 , 3410.Xr pflow 4 , 3411.Xr pfsync 4 , 3412.Xr tcp 4 , 3413.Xr sctp 4 , 3414.Xr udp 4 , 3415.Xr hosts 5 , 3416.Xr pf.os 5 , 3417.Xr protocols 5 , 3418.Xr services 5 , 3419.Xr ftp-proxy 8 , 3420.Xr pfctl 8 , 3421.Xr pflogd 8 3422.Sh HISTORY 3423The 3424.Nm 3425file format first appeared in 3426.Ox 3.0 . 3427