1.\" Copyright (c) 2006 Broadcom Corporation 2.\" David Christensen <davidch@broadcom.com>. All rights reserved. 3.\" 4.\" Redistribution and use in source and binary forms, with or without 5.\" modification, are permitted provided that the following conditions 6.\" are met: 7.\" 8.\" 1. Redistributions of source code must retain the above copyright 9.\" notice, this list of conditions and the following disclaimer. 10.\" 2. Redistributions in binary form must reproduce the above copyright 11.\" notice, this list of conditions and the following disclaimer in the 12.\" documentation and/or other materials provided with the distribution. 13.\" 3. Neither the name of Broadcom Corporation nor the name of its contributors 14.\" may be used to endorse or promote products derived from this software 15.\" without specific prior written consent. 16.\" 17.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS' 18.\" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20.\" ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS 21.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 22.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 23.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 24.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 25.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 26.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 27.\" THE POSSIBILITY OF SUCH DAMAGE. 28.\" 29.\" $FreeBSD$ 30.\" 31.Dd October 7, 2009 32.Dt BCE 4 33.Os 34.Sh NAME 35.Nm bce 36.Nd "Broadcom NetXtreme II (BCM5706/5708/5709/5716) PCI/PCIe Gigabit Ethernet adapter driver" 37.Sh SYNOPSIS 38To compile this driver into the kernel, 39place the following lines in your 40kernel configuration file: 41.Bd -ragged -offset indent 42.Cd "device miibus" 43.Cd "device bce" 44.Ed 45.Pp 46Alternatively, to load the driver as a 47module at boot time, place the following line in 48.Xr loader.conf 5 : 49.Bd -literal -offset indent 50if_bce_load="YES" 51.Ed 52.Sh DESCRIPTION 53The 54.Nm 55driver supports Broadcom's NetXtreme II product family, including the 56BCM5706, BCM5708, BCM5709 and BCM5716 Ethernet controllers. 57.Pp 58The NetXtreme II product family is composed of various Converged NIC (or CNIC) 59Ethernet controllers which support a TCP Offload Engine (TOE), Remote DMA (RDMA), 60and iSCSI acceleration, in addition to standard L2 Ethernet traffic, all on the 61same controller. 62.Pp 63The following features are supported in the 64.Nm 65driver under 66.Fx : 67.Pp 68.Bl -item -offset indent -compact 69.It 70IP/TCP/UDP checksum offload 71.It 72Jumbo frames (up to 9022 bytes) 73.It 74VLAN tag stripping 75.It 76Interrupt coalescing 77.It 7810/100/1000Mbps operation in full-duplex mode 79.It 8010/100Mbps operation in half-duplex mode 81.El 82.Pp 83The 84.Nm 85driver supports the following media types: 86.Bl -tag -width ".Cm 10baseT/UTP" 87.It Cm autoselect 88Enable autoselection of the media type and options. 89The user can manually override 90the autoselected mode by adding media options to 91.Xr rc.conf 5 . 92.It Cm 10baseT/UTP 93Set 10Mbps operation. 94The 95.Xr ifconfig 8 96.Cm mediaopt 97option can also be used to select either 98.Cm full-duplex 99or 100.Cm half-duplex 101modes. 102.It Cm 100baseTX 103Set 100Mbps (Fast Ethernet) operation. 104The 105.Xr ifconfig 8 106.Cm mediaopt 107option can also be used to select either 108.Cm full-duplex 109or 110.Cm half-duplex 111modes. 112.It Cm 1000baseSX 113Sets 1000Mbps operation. 114Only 115.Cm full-duplex 116mode is supported at this speed. 117.It Cm 1000baseT 118Set 1000baseT operation over twisted pair. 119Only 120.Cm full-duplex 121mode is supported. 122.It Cm 2500BaseSX 123Set 2500Mbps operation. 124Only 125.Cm full-duplex 126mode is supported. 127.El 128.Pp 129The 130.Nm 131driver supports the following media options: 132.Bl -tag -width ".Cm full-duplex" 133.It Cm full-duplex 134Force full duplex operation. 135.It Cm half-duplex 136Force half duplex operation. 137.El 138.Pp 139For more information on configuring this device, see 140.Xr ifconfig 8 . 141.Sh HARDWARE 142The 143.Nm 144driver provides support for various NICs based on the Broadcom NetXtreme II 145family of Gigabit Ethernet controllers, including the 146following: 147.Pp 148.Bl -bullet -compact 149.It 150Broadcom NetXtreme II BCM5706 1000Base-SX 151.It 152Broadcom NetXtreme II BCM5706 1000Base-T 153.It 154Broadcom NetXtreme II BCM5708 1000Base-SX 155.It 156Broadcom NetXtreme II BCM5708 1000Base-T 157.It 158Broadcom NetXtreme II BCM5709 1000Base-SX 159.It 160Broadcom NetXtreme II BCM5709 1000Base-T 161.It 162Broadcom NetXtreme II BCM5716 1000Base-T 163.It 164Dell PowerEdge 1950 integrated BCM5708 NIC 165.It 166Dell PowerEdge 2950 integrated BCM5708 NIC 167.It 168Dell PowerEdge R710 integrated BCM5709 NIC 169.It 170HP NC370F Multifunction Gigabit Server Adapter 171.It 172HP NC370T Multifunction Gigabit Server Adapter 173.It 174HP NC370i Multifunction Gigabit Server Adapter 175.It 176HP NC371i Multifunction Gigabit Server Adapter 177.It 178HP NC373F PCIe Multifunc Giga Server Adapter 179.It 180HP NC373T PCIe Multifunction Gig Server Adapter 181.It 182HP NC373i Multifunction Gigabit Server Adapter 183.It 184HP NC373m Multifunction Gigabit Server Adapter 185.It 186HP NC374m PCIe Multifunction Adapter 187.It 188HP NC380T PCIe DP Multifunc Gig Server Adapter 189.It 190HP NC382T PCIe DP Multifunction Gigabit Server Adapter 191.It 192HP NC382i DP Multifunction Gigabit Server Adapter 193.It 194HP NC382m DP 1GbE Multifunction BL-c Adapter 195.El 196.Sh SYSCTL VARIABLES 197The following variables are available as both 198.Xr sysctl 8 199variables and 200.Xr loader 8 201tunables: 202.Bl -tag -width indent 203.It Va hw.bce.msi_enable 204Whether or not MSI support is enabled in the driver. 205The default value is 1. 206.El 207.Sh DIAGNOSTICS 208.Bl -diag 209.It "bce%d: PCI memory allocation failed!" 210The driver has encountered a fatal initialization error. 211.It "bce%d: PCI map interrupt failed!" 212The driver has encountered a fatal initialization error. 213.It "bce%d: Unsupported controller revision (%c%d)" 214The driver does not support the controller revision in use. 215.It "bce%d: Controller initialization failed!" 216The driver has encountered a fatal initialization error. 217.It "bce%d: NVRAM test failed!" 218The driver could not access the controller NVRAM correctly. 219.It "bce%d: DMA resource allocation failed!" 220The driver could not allocate DMA memory to setup the controllers 221host memory data structures. 222.It "bce%d: Interface allocation failed!" 223The driver could not create a network interface for the controller. 224.It "bce%d: PHY probe failed!" 225The driver could not access the PHY used by the controller. 226.It "bce%d: Failed to setup IRQ!" 227The driver could not initialize the IRQ handler. 228.It "bce%d: Error: PHY read timeout!" 229The driver could not read a PHY register before the timeout period expired. 230.It "bce%d: PHY write timeout!" 231The driver could not write to the PHY register because a timeout occurred. 232.It "bce%d: Timeout error reading NVRAM at offset 0x%08X!" 233The driver could not write to NVRAM because a timeout occurred. 234.It "bce%d: Unknown Flash NVRAM found!" 235The driver does not recognize the NVRAM device being used and therefore 236cannot access it correctly. 237.It "bce%d: Invalid NVRAM magic value!" 238The driver cannot read NVRAM or the NVRAM is corrupt. 239.It "bce%d: Invalid Manufacturing Information NVRAM CRC!" 240The driver cannot read NVRAM or the NVRAM is corrupt. 241.It "bce%d: Invalid Feature Configuration Information NVRAM CRC!" 242The driver cannot read NVRAM or the NVRAM is corrupt. 243.It "bce%d: DMA mapping error!" 244The driver was unable to map memory into DMA addressable space required 245by the controller. 246.It "bce%d: Could not allocate parent DMA tag!" 247The driver could not allocate a PCI compatible DMA tag. 248.It "bce%d: Could not allocate status block DMA tag!" 249The driver could not allocate a DMA tag for the controller's 250status block. 251.It "bce%d: Could not allocate status block DMA memory!" 252The driver could not allocate DMA addressable memory for the controller's 253status block. 254.It "bce%d: Could not map status block DMA memory!" 255The driver could not map the status block memory into the controller's DMA 256address space. 257.It "bce%d: Could not allocate statistics block DMA tag!" 258The driver could not allocate a DMA tag for the controller's 259statistics block. 260.It "bce%d: Could not allocate statistics block DMA memory!" 261The driver could not allocate DMA addressable memory for the controller's 262statistics block. 263.It "bce%d: Could not map statistics block DMA memory!" 264The driver could not map the statistics block memory into the controller's DMA 265address space. 266.It "bce%d: Could not allocate TX descriptor chain DMA tag!" 267The driver could not allocate a DMA tag for the controller's 268TX chain. 269.It "bce%d: Could not allocate TX descriptor chain DMA memory!" 270The driver could not allocate DMA addressable memory for the controller's 271TX chain. 272.It "bce%d: Could not map TX descriptor chain DMA memory!" 273The driver could not map the TX descriptor chain memory into the controller's DMA 274address space. 275.It "bce%d: Could not allocate TX mbuf DMA tag!" 276The driver could not allocate a DMA tag for the controller's 277TX mbuf memory. 278.It "bce%d: Unable to create TX mbuf DMA map!" 279The driver could not map the TX mbuf memory into the controller's DMA 280address space. 281.It "bce%d: Could not allocate RX descriptor chain DMA tag!" 282The driver could not allocate a DMA tag for the controller's 283RX chain. 284.It "bce%d: Could not allocate RX descriptor chain " 285The driver could not allocate DMA addressable memory for the controller's 286RX chain. 287.It "bce%d: Could not map RX descriptor chain DMA memory!" 288The driver could not map the RX descriptor chain memory into the controller's DMA 289address space. 290.It "bce%d: Could not allocate RX mbuf DMA tag!" 291The driver could not allocate a DMA tag for the controller's 292RX mbuf memory. 293.It "bce%d: Unable to create RX mbuf DMA map!" 294The driver could not map the RX mbuf memory into the controller's DMA 295address space. 296.It "bce%d: Firmware synchronization timeout!" 297The driver was not able to synchronize with the firmware running on the 298controller. 299The firmware may be stopped or hung. 300.It "bce%d: Invalid Ethernet address!" 301The driver was not able to read a valid Ethernet MAC address from NVRAM. 302.It "bce%d: Reset failed!" 303The driver has encountered a fatal initialization error. 304.It "bce%d: Byte swap is incorrect!" 305The driver has encountered a fatal initialization error. 306Contact the author 307with details of the CPU architecture and system chipset in use. 308.It "bce%d: Firmware did not complete initialization!" 309The driver has encountered a fatal initialization error. 310.It "bce%d: Bootcode not running!" 311The driver has encountered a fatal initialization error. 312.It "bce%d: Error mapping mbuf into RX chain!" 313The driver could not map a RX mbuf into DMA addressable memory. 314.It "bce%d: Error filling RX chain: rx_bd[0x%04X]!" 315The driver was unable to allocate enough mbufs to fill the RX chain 316during initialization. 317Try increasing the number of mbufs available in 318the system, increase system memory, or if using jumbo frames, make sure 319enough 9KB mbufs are available. 320.It "bce%d: Failed to allocate new mbuf, incoming frame dropped!" 321The driver was unable to allocate a new mbuf for the RX chain and reused 322the mbuf for the received frame, dropping the incoming frame in the process. 323Try increasing the number of mbufs available in the system or increase system 324memory. 325.It "bce%d: Controller reset failed!" 326A fatal initialization error has occurred. 327.It "bce%d: Controller initialization failed!" 328A fatal initialization error has occurred. 329.It "bce%d: Block initialization failed!" 330A fatal initialization error has occurred. 331.It "bce%d: Error mapping mbuf into TX chain!" 332The driver could not map a TX mbuf into DMA addressable memory. 333.It "bce%d: Error registering poll function!" 334The driver received an error while attempting to register the poll function. 335.It "bce%d: Changing VLAN_MTU not supported." 336Changing the VLAN MTU is not currently supported by the driver. 337.It "bce%d: Cannot change VLAN_HWTAGGING while management firmware (ASF/IPMI/UMP) is running!" 338Management firmware to support ASF/IPMI/UMP requires that VLAN 339tag stripping be enabled in the controller. 340.It "bce%d: Changing VLAN_HWTAGGING not supported!" 341Disabling VLAN tag stripping is not currently supported by the driver. 342.It "bce%d: Watchdog timeout occurred, resetting!" 343The device has stopped responding to the network, there is a problem 344with the cable connection, or a driver logic problem has occurred.. 345.It "bce%d: Fatal attention detected: 0x%08X!" 346A controller hardware failure has occurred. 347If the problem continues replace the controller. 348.El 349.Sh SEE ALSO 350.Xr altq 4 , 351.Xr arp 4 , 352.Xr miibus 4 , 353.Xr netintro 4 , 354.Xr ng_ether 4 , 355.Xr vlan 4 , 356.Xr ifconfig 8 357.Sh HISTORY 358The 359.Nm 360device driver first appeared in 361.Fx 6.1 . 362.Sh AUTHORS 363The 364.Nm 365driver was written by 366.An David Christensen Aq davidch@broadcom.com . 367