1 /* 2 * Copyright (c) 2002-2003,2010 Luigi Rizzo 3 * Copyright (c) 1996 Alex Nash, Paul Traina, Poul-Henning Kamp 4 * Copyright (c) 1994 Ugen J.S.Antsilevich 5 * 6 * Idea and grammar partially left from: 7 * Copyright (c) 1993 Daniel Boulet 8 * 9 * Redistribution and use in source forms, with and without modification, 10 * are permitted provided that this entire comment appears intact. 11 * 12 * Redistribution in binary form may occur without any restrictions. 13 * Obviously, it would be nice if you gave credit where credit is due 14 * but requiring it would be too onerous. 15 * 16 * This software is provided ``AS IS'' without any warranties of any kind. 17 * 18 * Command line interface for IP firewall facility 19 * 20 * $FreeBSD$ 21 */ 22 23 #include <sys/wait.h> 24 #include <ctype.h> 25 #include <err.h> 26 #include <errno.h> 27 #include <signal.h> 28 #include <stdio.h> 29 #include <stdlib.h> 30 #include <string.h> 31 #include <sysexits.h> 32 #include <unistd.h> 33 34 #include "ipfw2.h" 35 36 static void 37 help(void) 38 { 39 fprintf(stderr, 40 "ipfw syntax summary (but please do read the ipfw(8) manpage):\n\n" 41 "\tipfw [-abcdefhnNqStTv] <command>\n\n" 42 "where <command> is one of the following:\n\n" 43 "add [num] [set N] [prob x] RULE-BODY\n" 44 "{pipe|queue} N config PIPE-BODY\n" 45 "[pipe|queue] {zero|delete|show} [N{,N}]\n" 46 "nat N config {ip IPADDR|if IFNAME|log|deny_in|same_ports|unreg_only|reset|\n" 47 " reverse|proxy_only|redirect_addr linkspec|\n" 48 " redirect_port linkspec|redirect_proto linkspec}\n" 49 "set [disable N... enable N...] | move [rule] X to Y | swap X Y | show\n" 50 "set N {show|list|zero|resetlog|delete} [N{,N}] | flush\n" 51 "table N {add ip[/bits] [value] | delete ip[/bits] | flush | list}\n" 52 "table all {flush | list}\n" 53 "\n" 54 "RULE-BODY: check-state [PARAMS] | ACTION [PARAMS] ADDR [OPTION_LIST]\n" 55 "ACTION: check-state | allow | count | deny | unreach{,6} CODE |\n" 56 " skipto N | {divert|tee} PORT | forward ADDR |\n" 57 " pipe N | queue N | nat N | setfib FIB | reass\n" 58 "PARAMS: [log [logamount LOGLIMIT]] [altq QUEUE_NAME]\n" 59 "ADDR: [ MAC dst src ether_type ] \n" 60 " [ ip from IPADDR [ PORT ] to IPADDR [ PORTLIST ] ]\n" 61 " [ ipv6|ip6 from IP6ADDR [ PORT ] to IP6ADDR [ PORTLIST ] ]\n" 62 "IPADDR: [not] { any | me | ip/bits{x,y,z} | table(t[,v]) | IPLIST }\n" 63 "IP6ADDR: [not] { any | me | me6 | ip6/bits | IP6LIST }\n" 64 "IP6LIST: { ip6 | ip6/bits }[,IP6LIST]\n" 65 "IPLIST: { ip | ip/bits | ip:mask }[,IPLIST]\n" 66 "OPTION_LIST: OPTION [OPTION_LIST]\n" 67 "OPTION: bridged | diverted | diverted-loopback | diverted-output |\n" 68 " {dst-ip|src-ip} IPADDR | {dst-ip6|src-ip6|dst-ipv6|src-ipv6} IP6ADDR |\n" 69 " {dst-port|src-port} LIST |\n" 70 " estab | frag | {gid|uid} N | icmptypes LIST | in | out | ipid LIST |\n" 71 " iplen LIST | ipoptions SPEC | ipprecedence | ipsec | iptos SPEC |\n" 72 " ipttl LIST | ipversion VER | keep-state | layer2 | limit ... |\n" 73 " icmp6types LIST | ext6hdr LIST | flow-id N[,N] | fib FIB |\n" 74 " mac ... | mac-type LIST | proto LIST | {recv|xmit|via} {IF|IPADDR} |\n" 75 " setup | {tcpack|tcpseq|tcpwin} NN | tcpflags SPEC | tcpoptions SPEC |\n" 76 " tcpdatalen LIST | verrevpath | versrcreach | antispoof\n" 77 ); 78 79 exit(0); 80 } 81 82 /* 83 * Called with the arguments, including program name because getopt 84 * wants it to be present. 85 * Returns 0 if successful, 1 if empty command, errx() in case of errors. 86 * First thing we do is process parameters creating an argv[] array 87 * which includes the program name and a NULL entry at the end. 88 * If we are called with a single string, we split it on whitespace. 89 * Also, arguments with a trailing ',' are joined to the next one. 90 * The pointers (av[]) and data are in a a single chunk of memory. 91 * av[0] points to the original program name, all other entries 92 * point into the allocated chunk. 93 */ 94 static int 95 ipfw_main(int oldac, char **oldav) 96 { 97 int ch, ac; 98 const char *errstr; 99 char **av, **save_av; 100 int do_acct = 0; /* Show packet/byte count */ 101 int try_next = 0; /* set if pipe cmd not found */ 102 int av_size; /* compute the av size */ 103 char *av_p; /* used to build the av list */ 104 105 #define WHITESP " \t\f\v\n\r" 106 if (oldac < 2) 107 return 1; /* need at least one argument */ 108 109 if (oldac == 2) { 110 /* 111 * If we are called with one argument, try to split it into 112 * words for subsequent parsing. Spaces after a ',' are 113 * removed by copying the string in-place. 114 */ 115 char *arg = oldav[1]; /* The string is the first arg. */ 116 int l = strlen(arg); 117 int copy = 0; /* 1 if we need to copy, 0 otherwise */ 118 int i, j; 119 120 for (i = j = 0; i < l; i++) { 121 if (arg[i] == '#') /* comment marker */ 122 break; 123 if (copy) { 124 arg[j++] = arg[i]; 125 copy = !index("," WHITESP, arg[i]); 126 } else { 127 copy = !index(WHITESP, arg[i]); 128 if (copy) 129 arg[j++] = arg[i]; 130 } 131 } 132 if (!copy && j > 0) /* last char was a 'blank', remove it */ 133 j--; 134 l = j; /* the new argument length */ 135 arg[j++] = '\0'; 136 if (l == 0) /* empty string! */ 137 return 1; 138 139 /* 140 * First, count number of arguments. Because of the previous 141 * processing, this is just the number of blanks plus 1. 142 */ 143 for (i = 0, ac = 1; i < l; i++) 144 if (index(WHITESP, arg[i]) != NULL) 145 ac++; 146 147 /* 148 * Allocate the argument list structure as a single block 149 * of memory, containing pointers and the argument 150 * strings. We include one entry for the program name 151 * because getopt expects it, and a NULL at the end 152 * to simplify further parsing. 153 */ 154 ac++; /* add 1 for the program name */ 155 av_size = (ac+1) * sizeof(char *) + l + 1; 156 av = safe_calloc(av_size, 1); 157 158 /* 159 * Init the argument pointer to the end of the array 160 * and copy arguments from arg[] to av[]. For each one, 161 * j is the initial character, i is the one past the end. 162 */ 163 av_p = (char *)&av[ac+1]; 164 for (ac = 1, i = j = 0; i < l; i++) { 165 if (index(WHITESP, arg[i]) != NULL || i == l-1) { 166 if (i == l-1) 167 i++; 168 bcopy(arg+j, av_p, i-j); 169 av[ac] = av_p; 170 av_p += i-j; /* the lenght of the string */ 171 *av_p++ = '\0'; 172 ac++; 173 j = i + 1; 174 } 175 } 176 } else { 177 /* 178 * If an argument ends with ',' join with the next one. 179 */ 180 int first, i, l=0; 181 182 /* 183 * Allocate the argument list structure as a single block 184 * of memory, containing both pointers and the argument 185 * strings. We include some space for the program name 186 * because getopt expects it. 187 * We add an extra pointer to the end of the array, 188 * to make simpler further parsing. 189 */ 190 for (i=0; i<oldac; i++) 191 l += strlen(oldav[i]); 192 193 av_size = (oldac+1) * sizeof(char *) + l + oldac; 194 av = safe_calloc(av_size, 1); 195 196 /* 197 * Init the argument pointer to the end of the array 198 * and copy arguments from arg[] to av[] 199 */ 200 av_p = (char *)&av[oldac+1]; 201 for (first = i = ac = 1, l = 0; i < oldac; i++) { 202 char *arg = oldav[i]; 203 int k = strlen(arg); 204 205 l += k; 206 if (arg[k-1] != ',' || i == oldac-1) { 207 /* Time to copy. */ 208 av[ac] = av_p; 209 for (l=0; first <= i; first++) { 210 strcat(av_p, oldav[first]); 211 av_p += strlen(oldav[first]); 212 } 213 *av_p++ = '\0'; 214 ac++; 215 l = 0; 216 first = i+1; 217 } 218 } 219 } 220 221 /* 222 * set the progname pointer to the original string 223 * and terminate the array with null 224 */ 225 av[0] = oldav[0]; 226 av[ac] = NULL; 227 228 /* Set the force flag for non-interactive processes */ 229 if (!co.do_force) 230 co.do_force = !isatty(STDIN_FILENO); 231 232 #ifdef EMULATE_SYSCTL /* sysctl emulation */ 233 if ( ac >= 2 && !strcmp(av[1], "sysctl")) { 234 char *s; 235 int i; 236 237 if (ac != 3) { 238 printf( "sysctl emulation usage:\n" 239 " ipfw sysctl name[=value]\n" 240 " ipfw sysctl -a\n"); 241 return 0; 242 } 243 s = index(av[2], '='); 244 if (s == NULL) { 245 s = !strcmp(av[2], "-a") ? NULL : av[2]; 246 sysctlbyname(s, NULL, NULL, NULL, 0); 247 } else { /* ipfw sysctl x.y.z=value */ 248 /* assume an INT value, will extend later */ 249 if (s[1] == '\0') { 250 printf("ipfw sysctl: missing value\n\n"); 251 return 0; 252 } 253 *s = '\0'; 254 i = strtol(s+1, NULL, 0); 255 sysctlbyname(av[2], NULL, NULL, &i, sizeof(int)); 256 } 257 return 0; 258 } 259 #endif 260 261 /* Save arguments for final freeing of memory. */ 262 save_av = av; 263 264 optind = optreset = 1; /* restart getopt() */ 265 while ((ch = getopt(ac, av, "abcdefhinNp:qs:STtv")) != -1) 266 switch (ch) { 267 case 'a': 268 do_acct = 1; 269 break; 270 271 case 'b': 272 co.comment_only = 1; 273 co.do_compact = 1; 274 break; 275 276 case 'c': 277 co.do_compact = 1; 278 break; 279 280 case 'd': 281 co.do_dynamic = 1; 282 break; 283 284 case 'e': 285 co.do_expired = 1; 286 break; 287 288 case 'f': 289 co.do_force = 1; 290 break; 291 292 case 'h': /* help */ 293 free(save_av); 294 help(); 295 break; /* NOTREACHED */ 296 297 case 'i': 298 co.do_value_as_ip = 1; 299 break; 300 301 case 'n': 302 co.test_only = 1; 303 break; 304 305 case 'N': 306 co.do_resolv = 1; 307 break; 308 309 case 'p': 310 errx(EX_USAGE, "An absolute pathname must be used " 311 "with -p option."); 312 313 case 'q': 314 co.do_quiet = 1; 315 break; 316 317 case 's': /* sort */ 318 co.do_sort = atoi(optarg); 319 break; 320 321 case 'S': 322 co.show_sets = 1; 323 break; 324 325 case 't': 326 co.do_time = 1; 327 break; 328 329 case 'T': 330 co.do_time = 2; /* numeric timestamp */ 331 break; 332 333 case 'v': /* verbose */ 334 co.verbose = 1; 335 break; 336 337 default: 338 free(save_av); 339 return 1; 340 } 341 342 ac -= optind; 343 av += optind; 344 NEED1("bad arguments, for usage summary ``ipfw''"); 345 346 /* 347 * An undocumented behaviour of ipfw1 was to allow rule numbers first, 348 * e.g. "100 add allow ..." instead of "add 100 allow ...". 349 * In case, swap first and second argument to get the normal form. 350 */ 351 if (ac > 1 && isdigit(*av[0])) { 352 char *p = av[0]; 353 354 av[0] = av[1]; 355 av[1] = p; 356 } 357 358 /* 359 * Optional: pipe, queue or nat. 360 */ 361 co.do_nat = 0; 362 co.do_pipe = 0; 363 co.use_set = 0; 364 if (!strncmp(*av, "nat", strlen(*av))) 365 co.do_nat = 1; 366 else if (!strncmp(*av, "pipe", strlen(*av))) 367 co.do_pipe = 1; 368 else if (_substrcmp(*av, "queue") == 0) 369 co.do_pipe = 2; 370 else if (_substrcmp(*av, "flowset") == 0) 371 co.do_pipe = 2; 372 else if (_substrcmp(*av, "sched") == 0) 373 co.do_pipe = 3; 374 else if (!strncmp(*av, "set", strlen(*av))) { 375 if (ac > 1 && isdigit(av[1][0])) { 376 co.use_set = strtonum(av[1], 0, resvd_set_number, 377 &errstr); 378 if (errstr) 379 errx(EX_DATAERR, 380 "invalid set number %s\n", av[1]); 381 ac -= 2; av += 2; co.use_set++; 382 } 383 } 384 385 if (co.do_pipe || co.do_nat) { 386 ac--; 387 av++; 388 } 389 NEED1("missing command"); 390 391 /* 392 * For pipes, queues and nats we normally say 'nat|pipe NN config' 393 * but the code is easier to parse as 'nat|pipe config NN' 394 * so we swap the two arguments. 395 */ 396 if ((co.do_pipe || co.do_nat) && ac > 1 && isdigit(*av[0])) { 397 char *p = av[0]; 398 399 av[0] = av[1]; 400 av[1] = p; 401 } 402 403 if (co.use_set == 0) { 404 if (_substrcmp(*av, "add") == 0) 405 ipfw_add(av); 406 else if (co.do_nat && _substrcmp(*av, "show") == 0) 407 ipfw_show_nat(ac, av); 408 else if (co.do_pipe && _substrcmp(*av, "config") == 0) 409 ipfw_config_pipe(ac, av); 410 else if (co.do_nat && _substrcmp(*av, "config") == 0) 411 ipfw_config_nat(ac, av); 412 else if (_substrcmp(*av, "set") == 0) 413 ipfw_sets_handler(av); 414 else if (_substrcmp(*av, "table") == 0) 415 ipfw_table_handler(ac, av); 416 else if (_substrcmp(*av, "enable") == 0) 417 ipfw_sysctl_handler(av, 1); 418 else if (_substrcmp(*av, "disable") == 0) 419 ipfw_sysctl_handler(av, 0); 420 else 421 try_next = 1; 422 } 423 424 if (co.use_set || try_next) { 425 if (_substrcmp(*av, "delete") == 0) 426 ipfw_delete(av); 427 else if (_substrcmp(*av, "flush") == 0) 428 ipfw_flush(co.do_force); 429 else if (_substrcmp(*av, "zero") == 0) 430 ipfw_zero(ac, av, 0 /* IP_FW_ZERO */); 431 else if (_substrcmp(*av, "resetlog") == 0) 432 ipfw_zero(ac, av, 1 /* IP_FW_RESETLOG */); 433 else if (_substrcmp(*av, "print") == 0 || 434 _substrcmp(*av, "list") == 0) 435 ipfw_list(ac, av, do_acct); 436 else if (_substrcmp(*av, "show") == 0) 437 ipfw_list(ac, av, 1 /* show counters */); 438 else 439 errx(EX_USAGE, "bad command `%s'", *av); 440 } 441 442 /* Free memory allocated in the argument parsing. */ 443 free(save_av); 444 return 0; 445 } 446 447 448 static void 449 ipfw_readfile(int ac, char *av[]) 450 { 451 #define MAX_ARGS 32 452 char buf[4096]; 453 char *progname = av[0]; /* original program name */ 454 const char *cmd = NULL; /* preprocessor name, if any */ 455 const char *filename = av[ac-1]; /* file to read */ 456 int c, lineno=0; 457 FILE *f = NULL; 458 pid_t preproc = 0; 459 460 while ((c = getopt(ac, av, "cfNnp:qS")) != -1) { 461 switch(c) { 462 case 'c': 463 co.do_compact = 1; 464 break; 465 466 case 'f': 467 co.do_force = 1; 468 break; 469 470 case 'N': 471 co.do_resolv = 1; 472 break; 473 474 case 'n': 475 co.test_only = 1; 476 break; 477 478 case 'p': 479 /* 480 * ipfw -p cmd [args] filename 481 * 482 * We are done with getopt(). All arguments 483 * except the filename go to the preprocessor, 484 * so we need to do the following: 485 * - check that a filename is actually present; 486 * - advance av by optind-1 to skip arguments 487 * already processed; 488 * - decrease ac by optind, to remove the args 489 * already processed and the final filename; 490 * - set the last entry in av[] to NULL so 491 * popen() can detect the end of the array; 492 * - set optind=ac to let getopt() terminate. 493 */ 494 if (optind == ac) 495 errx(EX_USAGE, "no filename argument"); 496 cmd = optarg; 497 av[ac-1] = NULL; 498 av += optind - 1; 499 ac -= optind; 500 optind = ac; 501 break; 502 503 case 'q': 504 co.do_quiet = 1; 505 break; 506 507 case 'S': 508 co.show_sets = 1; 509 break; 510 511 default: 512 errx(EX_USAGE, "bad arguments, for usage" 513 " summary ``ipfw''"); 514 } 515 516 } 517 518 if (cmd == NULL && ac != optind + 1) 519 errx(EX_USAGE, "extraneous filename arguments %s", av[ac-1]); 520 521 if ((f = fopen(filename, "r")) == NULL) 522 err(EX_UNAVAILABLE, "fopen: %s", filename); 523 524 if (cmd != NULL) { /* pipe through preprocessor */ 525 int pipedes[2]; 526 527 if (pipe(pipedes) == -1) 528 err(EX_OSERR, "cannot create pipe"); 529 530 preproc = fork(); 531 if (preproc == -1) 532 err(EX_OSERR, "cannot fork"); 533 534 if (preproc == 0) { 535 /* 536 * Child, will run the preprocessor with the 537 * file on stdin and the pipe on stdout. 538 */ 539 if (dup2(fileno(f), 0) == -1 540 || dup2(pipedes[1], 1) == -1) 541 err(EX_OSERR, "dup2()"); 542 fclose(f); 543 close(pipedes[1]); 544 close(pipedes[0]); 545 execvp(cmd, av); 546 err(EX_OSERR, "execvp(%s) failed", cmd); 547 } else { /* parent, will reopen f as the pipe */ 548 fclose(f); 549 close(pipedes[1]); 550 if ((f = fdopen(pipedes[0], "r")) == NULL) { 551 int savederrno = errno; 552 553 (void)kill(preproc, SIGTERM); 554 errno = savederrno; 555 err(EX_OSERR, "fdopen()"); 556 } 557 } 558 } 559 560 while (fgets(buf, sizeof(buf), f)) { /* read commands */ 561 char linename[20]; 562 char *args[2]; 563 564 lineno++; 565 snprintf(linename, sizeof(linename), "Line %d", lineno); 566 setprogname(linename); /* XXX */ 567 args[0] = progname; 568 args[1] = buf; 569 ipfw_main(2, args); 570 } 571 fclose(f); 572 if (cmd != NULL) { 573 int status; 574 575 if (waitpid(preproc, &status, 0) == -1) 576 errx(EX_OSERR, "waitpid()"); 577 if (WIFEXITED(status) && WEXITSTATUS(status) != EX_OK) 578 errx(EX_UNAVAILABLE, 579 "preprocessor exited with status %d", 580 WEXITSTATUS(status)); 581 else if (WIFSIGNALED(status)) 582 errx(EX_UNAVAILABLE, 583 "preprocessor exited with signal %d", 584 WTERMSIG(status)); 585 } 586 } 587 588 int 589 main(int ac, char *av[]) 590 { 591 #if defined(_WIN32) && defined(TCC) 592 { 593 WSADATA wsaData; 594 int ret=0; 595 unsigned short wVersionRequested = MAKEWORD(2, 2); 596 ret = WSAStartup(wVersionRequested, &wsaData); 597 if (ret != 0) { 598 /* Tell the user that we could not find a usable */ 599 /* Winsock DLL. */ 600 printf("WSAStartup failed with error: %d\n", ret); 601 return 1; 602 } 603 } 604 #endif 605 /* 606 * If the last argument is an absolute pathname, interpret it 607 * as a file to be preprocessed. 608 */ 609 610 if (ac > 1 && av[ac - 1][0] == '/') { 611 if (access(av[ac - 1], R_OK) == 0) 612 ipfw_readfile(ac, av); 613 else 614 err(EX_USAGE, "pathname: %s", av[ac - 1]); 615 } else { 616 if (ipfw_main(ac, av)) { 617 errx(EX_USAGE, 618 "usage: ipfw [options]\n" 619 "do \"ipfw -h\" or \"man ipfw\" for details"); 620 } 621 } 622 return EX_OK; 623 } 624