1# $NetBSD: rc.subr,v 1.67 2006/10/07 11:25:15 elad Exp $ 2# $FreeBSD$ 3# 4# Copyright (c) 1997-2004 The NetBSD Foundation, Inc. 5# All rights reserved. 6# 7# This code is derived from software contributed to The NetBSD Foundation 8# by Luke Mewburn. 9# 10# Redistribution and use in source and binary forms, with or without 11# modification, are permitted provided that the following conditions 12# are met: 13# 1. Redistributions of source code must retain the above copyright 14# notice, this list of conditions and the following disclaimer. 15# 2. Redistributions in binary form must reproduce the above copyright 16# notice, this list of conditions and the following disclaimer in the 17# documentation and/or other materials provided with the distribution. 18# 19# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29# POSSIBILITY OF SUCH DAMAGE. 30# 31# rc.subr 32# functions used by various rc scripts 33# 34 35: ${RC_PID:=$$}; export RC_PID 36 37# 38# Operating System dependent/independent variables 39# 40 41if [ -n "${_rc_subr_loaded}" ]; then 42 return 43fi 44 45_rc_subr_loaded="YES" 46 47SYSCTL="/sbin/sysctl" 48SYSCTL_N="${SYSCTL} -n" 49SYSCTL_W="${SYSCTL}" 50PROTECT="/usr/bin/protect" 51ID="/usr/bin/id" 52IDCMD="if [ -x $ID ]; then $ID -un; fi" 53PS="/bin/ps -ww" 54JID=0 55# rc_service provides the path to the service script that we are executing. 56# This is not being set here in an execution context, necessarily, so it's 57# really just a reasonable guess, and it will get overwritten later if 58# we are executing from some other means than direct execution by service(8) 59# or manual invocation of the service script. The prime example of this is 60# during system startup, all rc scripts will be invoked via /etc/rc, so 61# run_rc_script will overwrite rc_service with the file being sourced. 62rc_service="$0" 63 64# 65# functions 66# --------- 67 68# list_vars pattern 69# List variables matching glob pattern. 70# 71list_vars() 72{ 73 # Localize 'set' option below. 74 local - 75 local IFS=$'\n' line varname 76 77 # Disable path expansion in unquoted 'for' parameters below. 78 set -o noglob 79 80 for line in $(set); do 81 varname="${line%%=*}" 82 83 case "$varname" in 84 "$line"|*[!a-zA-Z0-9_]*) 85 continue 86 ;; 87 $1) 88 echo $varname 89 ;; 90 esac 91 done 92} 93 94# set_rcvar [var] [defval] [desc] 95# 96# Echo or define a rc.conf(5) variable name. Global variable 97# $rcvars is used. 98# 99# If no argument is specified, echo "${name}_enable". 100# 101# If only a var is specified, echo "${var}_enable". 102# 103# If var and defval are specified, the ${var} is defined as 104# rc.conf(5) variable and the default value is ${defvar}. An 105# optional argument $desc can also be specified to add a 106# description for that. 107# 108set_rcvar() 109{ 110 local _var 111 112 case $# in 113 0) echo ${name}_enable ;; 114 1) echo ${1}_enable ;; 115 *) 116 debug "set_rcvar: \$$1=$2 is added" \ 117 " as a rc.conf(5) variable." 118 _var=$1 119 rcvars="${rcvars# } $_var" 120 eval ${_var}_defval=\"$2\" 121 shift 2 122 eval ${_var}_desc=\"$*\" 123 ;; 124 esac 125} 126 127# set_rcvar_obsolete oldvar [newvar] [msg] 128# Define obsolete variable. 129# Global variable $rcvars_obsolete is used. 130# 131set_rcvar_obsolete() 132{ 133 local _var 134 _var=$1 135 debug "set_rcvar_obsolete: \$$1(old) -> \$$2(new) is defined" 136 137 rcvars_obsolete="${rcvars_obsolete# } $1" 138 eval ${1}_newvar=\"$2\" 139 shift 2 140 eval ${_var}_obsolete_msg=\"$*\" 141} 142 143# 144# force_depend script [rcvar] 145# Force a service to start. Intended for use by services 146# to resolve dependency issues. 147# $1 - filename of script, in /etc/rc.d, to run 148# $2 - name of the script's rcvar (minus the _enable) 149# 150force_depend() 151{ 152 local _depend _dep_rcvar 153 154 _depend="$1" 155 _dep_rcvar="${2:-$1}_enable" 156 157 [ -n "$rc_fast" ] && ! checkyesno always_force_depends && 158 checkyesno $_dep_rcvar && return 0 159 160 /etc/rc.d/${_depend} forcestatus >/dev/null 2>&1 && return 0 161 162 info "${name} depends on ${_depend}, which will be forced to start." 163 if ! /etc/rc.d/${_depend} forcestart; then 164 warn "Unable to force ${_depend}. It may already be running." 165 return 1 166 fi 167} 168 169# 170# checkyesno var 171# Test $1 variable, and warn if not set to YES or NO. 172# Return 0 if it's "yes" (et al), nonzero otherwise. 173# 174checkyesno() 175{ 176 eval _value=\$${1} 177 debug "checkyesno: $1 is set to $_value." 178 case $_value in 179 180 # "yes", "true", "on", or "1" 181 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 182 return 0 183 ;; 184 185 # "no", "false", "off", or "0" 186 [Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0) 187 return 1 188 ;; 189 *) 190 warn "\$${1} is not set properly - see rc.conf(5)." 191 return 1 192 ;; 193 esac 194} 195 196# 197# reverse_list list 198# print the list in reverse order 199# 200reverse_list() 201{ 202 _revlist= 203 for _revfile; do 204 _revlist="$_revfile $_revlist" 205 done 206 echo $_revlist 207} 208 209# stop_boot always 210# If booting directly to multiuser or $always is enabled, 211# send SIGTERM to the parent (/etc/rc) to abort the boot. 212# Otherwise just exit. 213# 214stop_boot() 215{ 216 local always 217 218 case $1 in 219 # "yes", "true", "on", or "1" 220 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 221 always=true 222 ;; 223 *) 224 always=false 225 ;; 226 esac 227 if [ "$autoboot" = yes -o "$always" = true ]; then 228 echo "ERROR: ABORTING BOOT (sending SIGTERM to parent)!" 229 kill -TERM ${RC_PID} 230 fi 231 exit 1 232} 233 234# 235# mount_critical_filesystems type 236# Go through the list of critical filesystems as provided in 237# the rc.conf(5) variable $critical_filesystems_${type}, checking 238# each one to see if it is mounted, and if it is not, mounting it. 239# 240mount_critical_filesystems() 241{ 242 eval _fslist=\$critical_filesystems_${1} 243 for _fs in $_fslist; do 244 mount | ( 245 _ismounted=false 246 while read what _on on _type type; do 247 if [ $on = $_fs ]; then 248 _ismounted=true 249 fi 250 done 251 if $_ismounted; then 252 : 253 else 254 mount $_fs >/dev/null 2>&1 255 fi 256 ) 257 done 258} 259 260# 261# check_pidfile pidfile procname [interpreter] 262# Parses the first line of pidfile for a PID, and ensures 263# that the process is running and matches procname. 264# Prints the matching PID upon success, nothing otherwise. 265# interpreter is optional; see _find_processes() for details. 266# 267check_pidfile() 268{ 269 _pidfile=$1 270 _procname=$2 271 _interpreter=$3 272 if [ -z "$_pidfile" -o -z "$_procname" ]; then 273 err 3 'USAGE: check_pidfile pidfile procname [interpreter]' 274 fi 275 if [ ! -f $_pidfile ]; then 276 debug "pid file ($_pidfile): not readable." 277 return 278 fi 279 read _pid _junk < $_pidfile 280 if [ -z "$_pid" ]; then 281 debug "pid file ($_pidfile): no pid in file." 282 return 283 fi 284 _find_processes $_procname ${_interpreter:-.} '-p '"$_pid" 285} 286 287# 288# check_process procname [interpreter] 289# Ensures that a process (or processes) named procname is running. 290# Prints a list of matching PIDs. 291# interpreter is optional; see _find_processes() for details. 292# 293check_process() 294{ 295 _procname=$1 296 _interpreter=$2 297 if [ -z "$_procname" ]; then 298 err 3 'USAGE: check_process procname [interpreter]' 299 fi 300 _find_processes $_procname ${_interpreter:-.} '-ax' 301} 302 303# 304# _find_processes procname interpreter psargs 305# Search for procname in the output of ps generated by psargs. 306# Prints the PIDs of any matching processes, space separated. 307# 308# If interpreter == ".", check the following variations of procname 309# against the first word of each command: 310# procname 311# `basename procname` 312# `basename procname` + ":" 313# "(" + `basename procname` + ")" 314# "[" + `basename procname` + "]" 315# 316# If interpreter != ".", read the first line of procname, remove the 317# leading #!, normalise whitespace, append procname, and attempt to 318# match that against each command, either as is, or with extra words 319# at the end. As an alternative, to deal with interpreted daemons 320# using perl, the basename of the interpreter plus a colon is also 321# tried as the prefix to procname. 322# 323_find_processes() 324{ 325 if [ $# -ne 3 ]; then 326 err 3 'USAGE: _find_processes procname interpreter psargs' 327 fi 328 _procname=$1 329 _interpreter=$2 330 _psargs=$3 331 332 _pref= 333 if [ $_interpreter != "." ]; then # an interpreted script 334 _script="${_chroot}${_chroot:+/}$_procname" 335 if [ -r "$_script" ]; then 336 read _interp < $_script # read interpreter name 337 case "$_interp" in 338 \#!*) 339 _interp=${_interp#\#!} # strip #! 340 set -- $_interp 341 case $1 in 342 */bin/env) 343 shift # drop env to get real name 344 ;; 345 esac 346 if [ $_interpreter != $1 ]; then 347 warn "\$command_interpreter $_interpreter != $1" 348 fi 349 ;; 350 *) 351 warn "no shebang line in $_script" 352 set -- $_interpreter 353 ;; 354 esac 355 else 356 warn "cannot read shebang line from $_script" 357 set -- $_interpreter 358 fi 359 _interp="$* $_procname" # cleanup spaces, add _procname 360 _interpbn=${1##*/} 361 _fp_args='_argv' 362 _fp_match='case "$_argv" in 363 ${_interp}|"${_interp} "*|"[${_interpbn}]"|"${_interpbn}: ${_procname}"*)' 364 else # a normal daemon 365 _procnamebn=${_procname##*/} 366 _fp_args='_arg0 _argv' 367 _fp_match='case "$_arg0" in 368 $_procname|$_procnamebn|${_procnamebn}:|"(${_procnamebn})"|"[${_procnamebn}]")' 369 fi 370 371 _proccheck="\ 372 $PS 2>/dev/null -o pid= -o jid= -o command= $_psargs"' | 373 while read _npid _jid '"$_fp_args"'; do 374 '"$_fp_match"' 375 if [ "$JID" -eq "$_jid" ]; 376 then echo -n "$_pref$_npid"; 377 _pref=" "; 378 fi 379 ;; 380 esac 381 done' 382 383# debug "in _find_processes: proccheck is ($_proccheck)." 384 eval $_proccheck 385} 386 387# sort_lite [-b] [-n] [-k POS] [-t SEP] 388# A lite version of sort(1) (supporting a few options) that can be used 389# before the real sort(1) is available (e.g., in scripts that run prior 390# to mountcritremote). Requires only shell built-in functionality. 391# 392sort_lite() 393{ 394 local funcname=sort_lite 395 local sort_sep="$IFS" sort_ignore_leading_space= 396 local sort_field=0 sort_strict_fields= sort_numeric= 397 local nitems=0 skip_leading=0 trim= 398 399 local OPTIND flag 400 while getopts bnk:t: flag; do 401 case "$flag" in 402 b) sort_ignore_leading_space=1 ;; 403 n) sort_numeric=1 sort_ignore_leading_space=1 ;; 404 k) sort_field="${OPTARG%%,*}" ;; # only up to first comma 405 # NB: Unlike sort(1) only one POS allowed 406 t) sort_sep="$OPTARG" 407 if [ ${#sort_sep} -gt 1 ]; then 408 echo "$funcname: multi-character tab \`$sort_sep'" >&2 409 return 1 410 fi 411 sort_strict_fields=1 412 ;; 413 \?) return 1 ;; 414 esac 415 done 416 shift $(( $OPTIND - 1 )) 417 418 # Create transformation pattern to trim leading text if desired 419 case "$sort_field" in 420 ""|[!0-9]*|*[!0-9.]*) 421 echo "$funcname: invalid sort field \`$sort_field'" >&2 422 return 1 423 ;; 424 *.*) 425 skip_leading=${sort_field#*.} sort_field=${sort_field%%.*} 426 while [ ${skip_leading:-0} -gt 1 ] 2> /dev/null; do 427 trim="$trim?" skip_leading=$(( $skip_leading - 1 )) 428 done 429 esac 430 431 # Copy input to series of local numbered variables 432 # NB: IFS of NULL preserves leading whitespace 433 local LINE 434 while IFS= read -r LINE || [ "$LINE" ]; do 435 nitems=$(( $nitems + 1 )) 436 local src_$nitems="$LINE" 437 done 438 439 # 440 # Sort numbered locals using insertion sort 441 # 442 local curitem curitem_orig curitem_mod curitem_haskey 443 local dest dest_orig dest_mod dest_haskey 444 local d gt n 445 local i=1 446 while [ $i -le $nitems ]; do 447 curitem_haskey=1 # Assume sort field (-k POS) exists 448 eval curitem=\"\$src_$i\" 449 curitem_mod="$curitem" # for modified comparison 450 curitem_orig="$curitem" # for original comparison 451 452 # Trim leading whitespace if desired 453 if [ "$sort_ignore_leading_space" ]; then 454 while case "$curitem_orig" in 455 [$IFS]*) : ;; *) false; esac 456 do 457 curitem_orig="${curitem_orig#?}" 458 done 459 curitem_mod="$curitem_orig" 460 fi 461 462 # Shift modified comparison value if sort field (-k POS) is > 1 463 n=$sort_field 464 while [ $n -gt 1 ]; do 465 case "$curitem_mod" in 466 *[$sort_sep]*) 467 # Cut text up-to (and incl.) first separator 468 curitem_mod="${curitem_mod#*[$sort_sep]}" 469 470 # Skip NULLs unless strict field splitting 471 [ "$sort_strict_fields" ] || 472 [ "${curitem_mod%%[$sort_sep]*}" ] || 473 [ $n -eq 2 ] || 474 continue 475 ;; 476 *) 477 # Asked for a field that doesn't exist 478 curitem_haskey= break 479 esac 480 n=$(( $n - 1 )) 481 done 482 483 # Trim trailing words if sort field >= 1 484 [ $sort_field -ge 1 -a "$sort_numeric" ] && 485 curitem_mod="${curitem_mod%%[$sort_sep]*}" 486 487 # Apply optional trim (-k POS.TRIM) to cut leading characters 488 curitem_mod="${curitem_mod#$trim}" 489 490 # Determine the type of modified comparison to use initially 491 # NB: Prefer numerical if requested but fallback to standard 492 case "$curitem_mod" in 493 ""|[!0-9]*) # NULL or begins with non-number 494 gt=">" 495 [ "$sort_numeric" ] && curitem_mod=0 496 ;; 497 *) 498 if [ "$sort_numeric" ]; then 499 gt="-gt" 500 curitem_mod="${curitem_mod%%[!0-9]*}" 501 # NB: trailing non-digits removed 502 # otherwise numeric comparison fails 503 else 504 gt=">" 505 fi 506 esac 507 508 # If first time through, short-circuit below position-search 509 if [ $i -le 1 ]; then 510 d=0 511 else 512 d=1 513 fi 514 515 # 516 # Find appropriate element position 517 # 518 while [ $d -gt 0 ] 519 do 520 dest_haskey=$curitem_haskey 521 eval dest=\"\$dest_$d\" 522 dest_mod="$dest" # for modified comparison 523 dest_orig="$dest" # for original comparison 524 525 # Trim leading whitespace if desired 526 if [ "$sort_ignore_leading_space" ]; then 527 while case "$dest_orig" in 528 [$IFS]*) : ;; *) false; esac 529 do 530 dest_orig="${dest_orig#?}" 531 done 532 dest_mod="$dest_orig" 533 fi 534 535 # Shift modified value if sort field (-k POS) is > 1 536 n=$sort_field 537 while [ $n -gt 1 ]; do 538 case "$dest_mod" in 539 *[$sort_sep]*) 540 # Cut text up-to (and incl.) 1st sep 541 dest_mod="${dest_mod#*[$sort_sep]}" 542 543 # Skip NULLs unless strict fields 544 [ "$sort_strict_fields" ] || 545 [ "${dest_mod%%[$sort_sep]*}" ] || 546 [ $n -eq 2 ] || 547 continue 548 ;; 549 *) 550 # Asked for a field that doesn't exist 551 dest_haskey= break 552 esac 553 n=$(( $n - 1 )) 554 done 555 556 # Trim trailing words if sort field >= 1 557 [ $sort_field -ge 1 -a "$sort_numeric" ] && 558 dest_mod="${dest_mod%%[$sort_sep]*}" 559 560 # Apply optional trim (-k POS.TRIM), cut leading chars 561 dest_mod="${dest_mod#$trim}" 562 563 # Determine type of modified comparison to use 564 # NB: Prefer numerical if requested, fallback to std 565 case "$dest_mod" in 566 ""|[!0-9]*) # NULL or begins with non-number 567 gt=">" 568 [ "$sort_numeric" ] && dest_mod=0 569 ;; 570 *) 571 if [ "$sort_numeric" ]; then 572 gt="-gt" 573 dest_mod="${dest_mod%%[!0-9]*}" 574 # NB: kill trailing non-digits 575 # for numeric comparison safety 576 else 577 gt=">" 578 fi 579 esac 580 581 # Break if we've found the proper element position 582 if [ "$curitem_haskey" -a "$dest_haskey" ]; then 583 if [ "$dest_mod" = "$curitem_mod" ]; then 584 [ "$dest_orig" ">" "$curitem_orig" ] && 585 break 586 elif [ "$dest_mod" $gt "$curitem_mod" ] \ 587 2> /dev/null 588 then 589 break 590 fi 591 else 592 [ "$dest_orig" ">" "$curitem_orig" ] && break 593 fi 594 595 # Break if we've hit the end 596 [ $d -ge $i ] && break 597 598 d=$(( $d + 1 )) 599 done 600 601 # Shift remaining positions forward, making room for new item 602 n=$i 603 while [ $n -ge $d ]; do 604 # Shift destination item forward one placement 605 eval dest_$(( $n + 1 ))=\"\$dest_$n\" 606 n=$(( $n - 1 )) 607 done 608 609 # Place the element 610 if [ $i -eq 1 ]; then 611 local dest_1="$curitem" 612 else 613 local dest_$d="$curitem" 614 fi 615 616 i=$(( $i + 1 )) 617 done 618 619 # Print sorted results 620 d=1 621 while [ $d -le $nitems ]; do 622 eval echo \"\$dest_$d\" 623 d=$(( $d + 1 )) 624 done 625} 626 627# 628# wait_for_pids pid [pid ...] 629# spins until none of the pids exist 630# 631wait_for_pids() 632{ 633 local _list _prefix _nlist _j 634 635 _list="$@" 636 if [ -z "$_list" ]; then 637 return 638 fi 639 _prefix= 640 while true; do 641 _nlist=""; 642 for _j in $_list; do 643 if kill -0 $_j 2>/dev/null; then 644 _nlist="${_nlist}${_nlist:+ }$_j" 645 [ -n "$_prefix" ] && sleep 1 646 fi 647 done 648 if [ -z "$_nlist" ]; then 649 break 650 fi 651 _list=$_nlist 652 echo -n ${_prefix:-"Waiting for PIDS: "}$_list 653 _prefix=", " 654 pwait $_list 2>/dev/null 655 done 656 if [ -n "$_prefix" ]; then 657 echo "." 658 fi 659} 660 661# 662# get_pidfile_from_conf string file 663# 664# Takes a string to search for in the specified file. 665# Ignores lines with traditional comment characters. 666# 667# Example: 668# 669# if get_pidfile_from_conf string file; then 670# pidfile="$_pidfile_from_conf" 671# else 672# pidfile='appropriate default' 673# fi 674# 675get_pidfile_from_conf() 676{ 677 if [ -z "$1" -o -z "$2" ]; then 678 err 3 "USAGE: get_pidfile_from_conf string file ($name)" 679 fi 680 681 local string file line 682 683 string="$1" ; file="$2" 684 685 if [ ! -s "$file" ]; then 686 err 3 "get_pidfile_from_conf: $file does not exist ($name)" 687 fi 688 689 while read line; do 690 case "$line" in 691 *[#\;]*${string}*) continue ;; 692 *${string}*) break ;; 693 esac 694 done < $file 695 696 if [ -n "$line" ]; then 697 line=${line#*/} 698 _pidfile_from_conf="/${line%%[\"\;]*}" 699 else 700 return 1 701 fi 702} 703 704# 705# check_startmsgs 706# If rc_quiet is set (usually as a result of using faststart at 707# boot time) check if rc_startmsgs is enabled. 708# 709check_startmsgs() 710{ 711 if [ -n "$rc_quiet" ]; then 712 checkyesno rc_startmsgs 713 else 714 return 0 715 fi 716} 717 718# 719# run_rc_command argument 720# Search for argument in the list of supported commands, which is: 721# "start stop restart rcvar status poll ${extra_commands}" 722# If there's a match, run ${argument}_cmd or the default method 723# (see below). 724# 725# If argument has a given prefix, then change the operation as follows: 726# Prefix Operation 727# ------ --------- 728# fast Skip the pid check, and set rc_fast=yes, rc_quiet=yes 729# force Set ${rcvar} to YES, and set rc_force=yes 730# one Set ${rcvar} to YES 731# quiet Don't output some diagnostics, and set rc_quiet=yes 732# 733# The following globals are used: 734# 735# Name Needed Purpose 736# ---- ------ ------- 737# name y Name of script. 738# 739# command n Full path to command. 740# Not needed if ${rc_arg}_cmd is set for 741# each keyword. 742# 743# command_args n Optional args/shell directives for command. 744# 745# command_interpreter n If not empty, command is interpreted, so 746# call check_{pidfile,process}() appropriately. 747# 748# desc n Description of script. 749# 750# extra_commands n List of extra commands supported. 751# 752# pidfile n If set, use check_pidfile $pidfile $command, 753# otherwise use check_process $command. 754# In either case, only check if $command is set. 755# 756# procname n Process name to check for instead of $command. 757# 758# rcvar n This is checked with checkyesno to determine 759# if the action should be run. 760# 761# ${name}_program n Full path to command. 762# Meant to be used in /etc/rc.conf to override 763# ${command}. 764# 765# ${name}_chroot n Directory to chroot to before running ${command} 766# Requires /usr to be mounted. 767# 768# ${name}_chdir n Directory to cd to before running ${command} 769# (if not using ${name}_chroot). 770# 771# ${name}_flags n Arguments to call ${command} with. 772# NOTE: $flags from the parent environment 773# can be used to override this. 774# 775# ${name}_env n Environment variables to run ${command} with. 776# 777# ${name}_env_file n File to source variables to run ${command} with. 778# 779# ${name}_fib n Routing table number to run ${command} with. 780# 781# ${name}_nice n Nice level to run ${command} at. 782# 783# ${name}_oomprotect n Don't kill ${command} when swap space is exhausted. 784# 785# ${name}_user n User to run ${command} as, using su(1) if not 786# using ${name}_chroot. 787# Requires /usr to be mounted. 788# 789# ${name}_group n Group to run chrooted ${command} as. 790# Requires /usr to be mounted. 791# 792# ${name}_groups n Comma separated list of supplementary groups 793# to run the chrooted ${command} with. 794# Requires /usr to be mounted. 795# 796# ${name}_prepend n Command added before ${command}. 797# 798# ${name}_login_class n Login class to use, else "daemon". 799# 800# ${name}_limits n limits(1) to apply to ${command}. 801# 802# ${rc_arg}_cmd n If set, use this as the method when invoked; 803# Otherwise, use default command (see below) 804# 805# ${rc_arg}_precmd n If set, run just before performing the 806# ${rc_arg}_cmd method in the default 807# operation (i.e, after checking for required 808# bits and process (non)existence). 809# If this completes with a non-zero exit code, 810# don't run ${rc_arg}_cmd. 811# 812# ${rc_arg}_postcmd n If set, run just after performing the 813# ${rc_arg}_cmd method, if that method 814# returned a zero exit code. 815# 816# required_dirs n If set, check for the existence of the given 817# directories before running a (re)start command. 818# 819# required_files n If set, check for the readability of the given 820# files before running a (re)start command. 821# 822# required_modules n If set, ensure the given kernel modules are 823# loaded before running a (re)start command. 824# The check and possible loads are actually 825# done after start_precmd so that the modules 826# aren't loaded in vain, should the precmd 827# return a non-zero status to indicate a error. 828# If a word in the list looks like "foo:bar", 829# "foo" is the KLD file name and "bar" is the 830# module name. If a word looks like "foo~bar", 831# "foo" is the KLD file name and "bar" is a 832# egrep(1) pattern matching the module name. 833# Otherwise the module name is assumed to be 834# the same as the KLD file name, which is most 835# common. See load_kld(). 836# 837# required_vars n If set, perform checkyesno on each of the 838# listed variables before running the default 839# (re)start command. 840# 841# Default behaviour for a given argument, if no override method is 842# provided: 843# 844# Argument Default behaviour 845# -------- ----------------- 846# start if !running && checkyesno ${rcvar} 847# ${command} 848# 849# stop if ${pidfile} 850# rc_pid=$(check_pidfile $pidfile $command) 851# else 852# rc_pid=$(check_process $command) 853# kill $sig_stop $rc_pid 854# wait_for_pids $rc_pid 855# ($sig_stop defaults to TERM.) 856# 857# reload Similar to stop, except use $sig_reload instead, 858# and doesn't wait_for_pids. 859# $sig_reload defaults to HUP. 860# Note that `reload' isn't provided by default, 861# it should be enabled via $extra_commands. 862# 863# restart Run `stop' then `start'. 864# 865# status Show if ${command} is running, etc. 866# 867# poll Wait for ${command} to exit. 868# 869# rcvar Display what rc.conf variable is used (if any). 870# 871# enabled Return true if the service is enabled. 872# 873# describe Show the service's description 874# 875# extracommands Show the service's extra commands 876# 877# Variables available to methods, and after run_rc_command() has 878# completed: 879# 880# Variable Purpose 881# -------- ------- 882# rc_arg Argument to command, after fast/force/one processing 883# performed 884# 885# rc_flags Flags to start the default command with. 886# Defaults to ${name}_flags, unless overridden 887# by $flags from the environment. 888# This variable may be changed by the precmd method. 889# 890# rc_service Path to the service being executed, in case the service 891# needs to re-invoke itself. 892# 893# rc_pid PID of command (if appropriate) 894# 895# rc_fast Not empty if "fast" was provided (q.v.) 896# 897# rc_force Not empty if "force" was provided (q.v.) 898# 899# rc_quiet Not empty if "quiet" was provided 900# 901# 902run_rc_command() 903{ 904 _return=0 905 rc_arg=$1 906 if [ -z "$name" ]; then 907 err 3 'run_rc_command: $name is not set.' 908 fi 909 910 # Don't repeat the first argument when passing additional command- 911 # line arguments to the command subroutines. 912 # 913 shift 1 914 rc_extra_args="$*" 915 916 _rc_prefix= 917 case "$rc_arg" in 918 fast*) # "fast" prefix; don't check pid 919 rc_arg=${rc_arg#fast} 920 rc_fast=yes 921 rc_quiet=yes 922 ;; 923 force*) # "force" prefix; always run 924 rc_force=yes 925 _rc_prefix=force 926 rc_arg=${rc_arg#${_rc_prefix}} 927 if [ -n "${rcvar}" ]; then 928 eval ${rcvar}=YES 929 fi 930 ;; 931 one*) # "one" prefix; set ${rcvar}=yes 932 _rc_prefix=one 933 rc_arg=${rc_arg#${_rc_prefix}} 934 if [ -n "${rcvar}" ]; then 935 eval ${rcvar}=YES 936 fi 937 ;; 938 quiet*) # "quiet" prefix; omit some messages 939 _rc_prefix=quiet 940 rc_arg=${rc_arg#${_rc_prefix}} 941 rc_quiet=yes 942 ;; 943 esac 944 945 eval _override_command=\$${name}_program 946 command=${_override_command:-$command} 947 948 _keywords="start stop restart rcvar enable disable delete enabled describe extracommands $extra_commands" 949 rc_pid= 950 _pidcmd= 951 _procname=${procname:-${command}} 952 953 # setup pid check command 954 if [ -n "$_procname" ]; then 955 if [ -n "$pidfile" ]; then 956 _pidcmd='rc_pid=$(check_pidfile '"$pidfile $_procname $command_interpreter"')' 957 else 958 _pidcmd='rc_pid=$(check_process '"$_procname $command_interpreter"')' 959 fi 960 _keywords="${_keywords} status poll" 961 fi 962 963 if [ -z "$rc_arg" ]; then 964 rc_usage $_keywords 965 fi 966 967 if [ "$rc_arg" = "enabled" ] ; then 968 checkyesno ${rcvar} 969 return $? 970 fi 971 972 if [ -n "$flags" ]; then # allow override from environment 973 rc_flags=$flags 974 else 975 eval rc_flags=\$${name}_flags 976 fi 977 eval _chdir=\$${name}_chdir _chroot=\$${name}_chroot \ 978 _nice=\$${name}_nice _user=\$${name}_user \ 979 _group=\$${name}_group _groups=\$${name}_groups \ 980 _fib=\$${name}_fib _env=\$${name}_env \ 981 _prepend=\$${name}_prepend _login_class=\${${name}_login_class:-daemon} \ 982 _limits=\$${name}_limits _oomprotect=\$${name}_oomprotect \ 983 _env_file=\$${name}_env_file 984 985 if [ -n "$_env_file" ] && [ -r "${_env_file}" ]; then # load env from file 986 set -a 987 . $_env_file 988 set +a 989 fi 990 991 if [ -n "$_user" ]; then # unset $_user if running as that user 992 if [ "$_user" = "$(eval $IDCMD)" ]; then 993 unset _user 994 fi 995 fi 996 997 [ -z "$autoboot" ] && eval $_pidcmd # determine the pid if necessary 998 999 for _elem in $_keywords; do 1000 if [ "$_elem" != "$rc_arg" ]; then 1001 continue 1002 fi 1003 # if ${rcvar} is set, $1 is not "rcvar", "describe", 1004 # "enable" or "delete", and ${rc_pid} is not set, run: 1005 # checkyesno ${rcvar} 1006 # and return if that failed 1007 # 1008 if [ -n "${rcvar}" -a "$rc_arg" != "rcvar" -a "$rc_arg" != "stop" \ 1009 -a "$rc_arg" != "delete" -a "$rc_arg" != "enable" \ 1010 -a "$rc_arg" != "describe" ] || 1011 [ -n "${rcvar}" -a "$rc_arg" = "stop" -a -z "${rc_pid}" ]; then 1012 if ! checkyesno ${rcvar}; then 1013 if [ -n "${rc_quiet}" ]; then 1014 return 0 1015 fi 1016 echo -n "Cannot '${rc_arg}' $name. Set ${rcvar} to " 1017 echo -n "YES in /etc/rc.conf or use 'one${rc_arg}' " 1018 echo "instead of '${rc_arg}'." 1019 return 0 1020 fi 1021 fi 1022 1023 if [ $rc_arg = "start" -a -z "$rc_fast" -a -n "$rc_pid" ]; then 1024 if [ -z "$rc_quiet" ]; then 1025 echo 1>&2 "${name} already running? " \ 1026 "(pid=$rc_pid)." 1027 fi 1028 return 1 1029 fi 1030 1031 # if there's a custom ${XXX_cmd}, 1032 # run that instead of the default 1033 # 1034 eval _cmd=\$${rc_arg}_cmd \ 1035 _precmd=\$${rc_arg}_precmd \ 1036 _postcmd=\$${rc_arg}_postcmd 1037 1038 if [ -n "$_cmd" ]; then 1039 if [ -n "$_env" ]; then 1040 eval "export -- $_env" 1041 fi 1042 _run_rc_precmd || return 1 1043 _run_rc_doit "$_cmd $rc_extra_args" || return 1 1044 _run_rc_postcmd 1045 return $_return 1046 fi 1047 1048 case "$rc_arg" in # default operations... 1049 1050 describe) 1051 if [ -n "$desc" ]; then 1052 echo "$desc" 1053 fi 1054 ;; 1055 1056 extracommands) 1057 echo "$extra_commands" 1058 ;; 1059 1060 enable) 1061 _out=$(/usr/sbin/sysrc -vs "$name" "$rcvar=YES") && 1062 echo "$name enabled in ${_out%%:*}" 1063 ;; 1064 1065 disable) 1066 _out=$(/usr/sbin/sysrc -vs "$name" "$rcvar=NO") && 1067 echo "$name disabled in ${_out%%:*}" 1068 ;; 1069 1070 delete) 1071 _files= 1072 for _file in $(sysrc -lEs "$name"); do 1073 _out=$(sysrc -Fif $_file "$rcvar") && _files="$_files $_file" 1074 done 1075 /usr/sbin/sysrc -x "$rcvar" && echo "$rcvar deleted in ${_files# }" 1076 # delete file in rc.conf.d if desired and empty. 1077 checkyesno service_delete_empty || _files= 1078 for _file in $_files; do 1079 [ "$_file" = "${_file#*/rc.conf.d/}" ] && continue 1080 [ $(/usr/bin/stat -f%z $_file) -gt 0 ] && continue 1081 /bin/rm "$_file" && echo "Empty file $_file removed" 1082 done 1083 ;; 1084 1085 status) 1086 _run_rc_precmd || return 1 1087 if [ -n "$rc_pid" ]; then 1088 echo "${name} is running as pid $rc_pid." 1089 else 1090 echo "${name} is not running." 1091 return 1 1092 fi 1093 _run_rc_postcmd 1094 ;; 1095 1096 start) 1097 if [ ! -x "${_chroot}${_chroot:+/}${command}" ]; then 1098 warn "run_rc_command: cannot run $command" 1099 return 1 1100 fi 1101 1102 if ! _run_rc_precmd; then 1103 warn "failed precmd routine for ${name}" 1104 return 1 1105 fi 1106 1107 # setup the full command to run 1108 # 1109 check_startmsgs && echo "Starting ${name}." 1110 if [ -n "$_chroot" ]; then 1111 _cd= 1112 _doit="\ 1113${_nice:+nice -n $_nice }\ 1114${_fib:+setfib -F $_fib }\ 1115${_env:+env $_env }\ 1116chroot ${_user:+-u $_user }${_group:+-g $_group }${_groups:+-G $_groups }\ 1117$_chroot $command $rc_flags $command_args" 1118 else 1119 _cd="${_chdir:+cd $_chdir && }" 1120 _doit="\ 1121${_fib:+setfib -F $_fib }\ 1122${_env:+env $_env }\ 1123$command $rc_flags $command_args" 1124 if [ -n "$_user" ]; then 1125 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 1126 fi 1127 if [ -n "$_nice" ]; then 1128 if [ -z "$_user" ]; then 1129 _doit="sh -c \"$_doit\"" 1130 fi 1131 _doit="nice -n $_nice $_doit" 1132 fi 1133 if [ -n "$_prepend" ]; then 1134 _doit="$_prepend $_doit" 1135 fi 1136 fi 1137 1138 # Prepend default limits 1139 _doit="$_cd limits -C $_login_class $_limits $_doit" 1140 1141 # run the full command 1142 # 1143 if ! _run_rc_doit "$_doit"; then 1144 warn "failed to start ${name}" 1145 return 1 1146 fi 1147 1148 # finally, run postcmd 1149 # 1150 _run_rc_postcmd 1151 ;; 1152 1153 stop) 1154 if [ -z "$rc_pid" ]; then 1155 [ -n "$rc_fast" ] && return 0 1156 _run_rc_notrunning 1157 return 1 1158 fi 1159 1160 _run_rc_precmd || return 1 1161 1162 # send the signal to stop 1163 # 1164 echo "Stopping ${name}." 1165 _doit=$(_run_rc_killcmd "${sig_stop:-TERM}") 1166 _run_rc_doit "$_doit" || return 1 1167 1168 # wait for the command to exit, 1169 # and run postcmd. 1170 wait_for_pids $rc_pid 1171 1172 _run_rc_postcmd 1173 ;; 1174 1175 reload) 1176 if [ -z "$rc_pid" ]; then 1177 _run_rc_notrunning 1178 return 1 1179 fi 1180 1181 _run_rc_precmd || return 1 1182 1183 _doit=$(_run_rc_killcmd "${sig_reload:-HUP}") 1184 _run_rc_doit "$_doit" || return 1 1185 1186 _run_rc_postcmd 1187 ;; 1188 1189 restart) 1190 # prevent restart being called more 1191 # than once by any given script 1192 # 1193 if ${_rc_restart_done:-false}; then 1194 return 0 1195 fi 1196 _rc_restart_done=true 1197 1198 _run_rc_precmd || return 1 1199 1200 # run those in a subshell to keep global variables 1201 ( run_rc_command ${_rc_prefix}stop $rc_extra_args ) 1202 ( run_rc_command ${_rc_prefix}start $rc_extra_args ) 1203 _return=$? 1204 [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 1205 1206 _run_rc_postcmd 1207 ;; 1208 1209 poll) 1210 _run_rc_precmd || return 1 1211 if [ -n "$rc_pid" ]; then 1212 wait_for_pids $rc_pid 1213 fi 1214 _run_rc_postcmd 1215 ;; 1216 1217 rcvar) 1218 echo -n "# $name" 1219 if [ -n "$desc" ]; then 1220 echo " : $desc" 1221 else 1222 echo "" 1223 fi 1224 echo "#" 1225 # Get unique vars in $rcvar $rcvars 1226 for _v in $rcvar $rcvars; do 1227 case $v in 1228 $_v\ *|\ *$_v|*\ $_v\ *) ;; 1229 *) v="${v# } $_v" ;; 1230 esac 1231 done 1232 1233 # Display variables. 1234 for _v in $v; do 1235 if [ -z "$_v" ]; then 1236 continue 1237 fi 1238 1239 eval _desc=\$${_v}_desc 1240 eval _defval=\$${_v}_defval 1241 _h="-" 1242 1243 eval echo \"$_v=\\\"\$$_v\\\"\" 1244 # decode multiple lines of _desc 1245 while [ -n "$_desc" ]; do 1246 case $_desc in 1247 *^^*) 1248 echo "# $_h ${_desc%%^^*}" 1249 _desc=${_desc#*^^} 1250 _h=" " 1251 ;; 1252 *) 1253 echo "# $_h ${_desc}" 1254 break 1255 ;; 1256 esac 1257 done 1258 echo "# (default: \"$_defval\")" 1259 done 1260 echo "" 1261 ;; 1262 1263 *) 1264 rc_usage $_keywords 1265 ;; 1266 1267 esac 1268 1269 # Apply protect(1) to the PID if ${name}_oomprotect is set. 1270 case "$rc_arg" in 1271 start) 1272 # We cannot use protect(1) inside jails. 1273 if [ -n "$_oomprotect" ] && [ -f "${PROTECT}" ] && 1274 [ "$(sysctl -n security.jail.jailed)" -eq 0 ]; then 1275 [ -z "${rc_pid}" ] && eval $_pidcmd 1276 case $_oomprotect in 1277 [Aa][Ll][Ll]) 1278 ${PROTECT} -i -p ${rc_pid} 1279 ;; 1280 [Yy][Ee][Ss]) 1281 ${PROTECT} -p ${rc_pid} 1282 ;; 1283 esac 1284 fi 1285 ;; 1286 esac 1287 1288 return $_return 1289 done 1290 1291 echo 1>&2 "$0: unknown directive '$rc_arg'." 1292 rc_usage $_keywords 1293 # not reached 1294} 1295 1296# 1297# Helper functions for run_rc_command: common code. 1298# They use such global variables besides the exported rc_* ones: 1299# 1300# name R/W 1301# ------------------ 1302# _precmd R 1303# _postcmd R 1304# _return W 1305# 1306_run_rc_precmd() 1307{ 1308 check_required_before "$rc_arg" || return 1 1309 1310 if [ -n "$_precmd" ]; then 1311 debug "run_rc_command: ${rc_arg}_precmd: $_precmd $rc_extra_args" 1312 eval "$_precmd $rc_extra_args" 1313 _return=$? 1314 1315 # If precmd failed and force isn't set, request exit. 1316 if [ $_return -ne 0 ] && [ -z "$rc_force" ]; then 1317 return 1 1318 fi 1319 fi 1320 1321 check_required_after "$rc_arg" || return 1 1322 1323 return 0 1324} 1325 1326_run_rc_postcmd() 1327{ 1328 if [ -n "$_postcmd" ]; then 1329 debug "run_rc_command: ${rc_arg}_postcmd: $_postcmd $rc_extra_args" 1330 eval "$_postcmd $rc_extra_args" 1331 _return=$? 1332 fi 1333 return 0 1334} 1335 1336_run_rc_doit() 1337{ 1338 debug "run_rc_command: doit: $*" 1339 eval "$@" 1340 _return=$? 1341 1342 # If command failed and force isn't set, request exit. 1343 if [ $_return -ne 0 ] && [ -z "$rc_force" ]; then 1344 return 1 1345 fi 1346 1347 return 0 1348} 1349 1350_run_rc_notrunning() 1351{ 1352 local _pidmsg 1353 1354 if [ -n "$pidfile" ]; then 1355 _pidmsg=" (check $pidfile)." 1356 else 1357 _pidmsg= 1358 fi 1359 echo 1>&2 "${name} not running?${_pidmsg}" 1360} 1361 1362_run_rc_killcmd() 1363{ 1364 local _cmd 1365 1366 _cmd="kill -$1 $rc_pid" 1367 if [ -n "$_user" ]; then 1368 _cmd="su -m ${_user} -c 'sh -c \"${_cmd}\"'" 1369 fi 1370 echo "$_cmd" 1371} 1372 1373# 1374# run_rc_script file arg 1375# Start the script `file' with `arg', and correctly handle the 1376# return value from the script. 1377# If `file' ends with `.sh' and lives in /etc/rc.d, ignore it as it's 1378# an old-style startup file. 1379# If `file' ends with `.sh' and does not live in /etc/rc.d, it's sourced 1380# into the current environment if $rc_fast_and_loose is set; otherwise 1381# it is run as a child process. 1382# If `file' appears to be a backup or scratch file, ignore it. 1383# Otherwise if it is executable run as a child process. 1384# 1385run_rc_script() 1386{ 1387 _file=$1 1388 _arg=$2 1389 if [ -z "$_file" -o -z "$_arg" ]; then 1390 err 3 'USAGE: run_rc_script file arg' 1391 fi 1392 1393 unset name command command_args command_interpreter \ 1394 extra_commands pidfile procname \ 1395 rcvar rcvars rcvars_obsolete required_dirs required_files \ 1396 required_vars 1397 eval unset ${_arg}_cmd ${_arg}_precmd ${_arg}_postcmd 1398 1399 rc_service="$_file" 1400 case "$_file" in 1401 /etc/rc.d/*.sh) # no longer allowed in the base 1402 warn "Ignoring old-style startup script $_file" 1403 ;; 1404 *[~#]|*.OLD|*.bak|*.orig|*,v) # scratch file; skip 1405 warn "Ignoring scratch file $_file" 1406 ;; 1407 *) # run in subshell 1408 if [ -x $_file ]; then 1409 if [ -n "$rc_fast_and_loose" ]; then 1410 set $_arg; . $_file 1411 else 1412 ( trap "echo Script $_file interrupted >&2 ; kill -QUIT $$" 3 1413 trap "echo Script $_file interrupted >&2 ; exit 1" 2 1414 trap "echo Script $_file running >&2" 29 1415 set $_arg; . $_file ) 1416 fi 1417 fi 1418 ;; 1419 esac 1420} 1421 1422# 1423# load_rc_config [service] 1424# Source in the configuration file(s) for a given service. 1425# If no service is specified, only the global configuration 1426# file(s) will be loaded. 1427# 1428load_rc_config() 1429{ 1430 local _name _rcvar_val _var _defval _v _msg _new _d 1431 _name=$1 1432 1433 if ${_rc_conf_loaded:-false}; then 1434 : 1435 else 1436 if [ -r /etc/defaults/rc.conf ]; then 1437 debug "Sourcing /etc/defaults/rc.conf" 1438 . /etc/defaults/rc.conf 1439 source_rc_confs 1440 elif [ -r /etc/rc.conf ]; then 1441 debug "Sourcing /etc/rc.conf (/etc/defaults/rc.conf doesn't exist)." 1442 . /etc/rc.conf 1443 fi 1444 _rc_conf_loaded=true 1445 fi 1446 1447 # If a service name was specified, attempt to load 1448 # service-specific configuration 1449 if [ -n "$_name" ] ; then 1450 for _d in /etc ${local_startup}; do 1451 _d=${_d%/rc.d} 1452 if [ -f ${_d}/rc.conf.d/"$_name" ]; then 1453 debug "Sourcing ${_d}/rc.conf.d/$_name" 1454 . ${_d}/rc.conf.d/"$_name" 1455 elif [ -d ${_d}/rc.conf.d/"$_name" ] ; then 1456 local _rc 1457 for _rc in ${_d}/rc.conf.d/"$_name"/* ; do 1458 if [ -f "$_rc" ] ; then 1459 debug "Sourcing $_rc" 1460 . "$_rc" 1461 fi 1462 done 1463 fi 1464 done 1465 fi 1466 1467 # Set defaults if defined. 1468 for _var in $rcvar $rcvars; do 1469 eval _defval=\$${_var}_defval 1470 if [ -n "$_defval" ]; then 1471 eval : \${$_var:=\$${_var}_defval} 1472 fi 1473 done 1474 1475 # check obsolete rc.conf variables 1476 for _var in $rcvars_obsolete; do 1477 eval _v=\$$_var 1478 eval _msg=\$${_var}_obsolete_msg 1479 eval _new=\$${_var}_newvar 1480 case $_v in 1481 "") 1482 ;; 1483 *) 1484 if [ -z "$_new" ]; then 1485 _msg="Ignored." 1486 else 1487 eval $_new=\"\$$_var\" 1488 if [ -z "$_msg" ]; then 1489 _msg="Use \$$_new instead." 1490 fi 1491 fi 1492 warn "\$$_var is obsolete. $_msg" 1493 ;; 1494 esac 1495 done 1496} 1497 1498# 1499# load_rc_config_var name var 1500# Read the rc.conf(5) var for name and set in the 1501# current shell, using load_rc_config in a subshell to prevent 1502# unwanted side effects from other variable assignments. 1503# 1504load_rc_config_var() 1505{ 1506 if [ $# -ne 2 ]; then 1507 err 3 'USAGE: load_rc_config_var name var' 1508 fi 1509 eval $(eval '( 1510 load_rc_config '$1' >/dev/null; 1511 if [ -n "${'$2'}" -o "${'$2'-UNSET}" != "UNSET" ]; then 1512 echo '$2'=\'\''${'$2'}\'\''; 1513 fi 1514 )' ) 1515} 1516 1517# 1518# rc_usage commands 1519# Print a usage string for $0, with `commands' being a list of 1520# valid commands. 1521# 1522rc_usage() 1523{ 1524 echo -n 1>&2 "Usage: $0 [fast|force|one|quiet](" 1525 1526 _sep= 1527 for _elem; do 1528 echo -n 1>&2 "$_sep$_elem" 1529 _sep="|" 1530 done 1531 echo 1>&2 ")" 1532 exit 1 1533} 1534 1535# 1536# err exitval message 1537# Display message to stderr and log to the syslog, and exit with exitval. 1538# 1539err() 1540{ 1541 exitval=$1 1542 shift 1543 1544 if [ -x /usr/bin/logger ]; then 1545 logger "$0: ERROR: $*" 1546 fi 1547 echo 1>&2 "$0: ERROR: $*" 1548 exit $exitval 1549} 1550 1551# 1552# warn message 1553# Display message to stderr and log to the syslog. 1554# 1555warn() 1556{ 1557 if [ -x /usr/bin/logger ]; then 1558 logger "$0: WARNING: $*" 1559 fi 1560 echo 1>&2 "$0: WARNING: $*" 1561} 1562 1563# 1564# info message 1565# Display informational message to stdout and log to syslog. 1566# 1567info() 1568{ 1569 case ${rc_info} in 1570 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 1571 if [ -x /usr/bin/logger ]; then 1572 logger "$0: INFO: $*" 1573 fi 1574 echo "$0: INFO: $*" 1575 ;; 1576 esac 1577} 1578 1579# 1580# debug message 1581# If debugging is enabled in rc.conf output message to stderr. 1582# BEWARE that you don't call any subroutine that itself calls this 1583# function. 1584# 1585debug() 1586{ 1587 case ${rc_debug} in 1588 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 1589 if [ -x /usr/bin/logger ]; then 1590 logger "$0: DEBUG: $*" 1591 fi 1592 echo 1>&2 "$0: DEBUG: $*" 1593 ;; 1594 esac 1595} 1596 1597# 1598# backup_file action file cur backup 1599# Make a backup copy of `file' into `cur', and save the previous 1600# version of `cur' as `backup'. 1601# 1602# The `action' keyword can be one of the following: 1603# 1604# add `file' is now being backed up (and is possibly 1605# being reentered into the backups system). `cur' 1606# is created. 1607# 1608# update `file' has changed and needs to be backed up. 1609# If `cur' exists, it is copied to `back' 1610# and then `file' is copied to `cur'. 1611# 1612# remove `file' is no longer being tracked by the backups 1613# system. `cur' is moved `back'. 1614# 1615# 1616backup_file() 1617{ 1618 _action=$1 1619 _file=$2 1620 _cur=$3 1621 _back=$4 1622 1623 case $_action in 1624 add|update) 1625 if [ -f $_cur ]; then 1626 cp -p $_cur $_back 1627 fi 1628 cp -p $_file $_cur 1629 chown root:wheel $_cur 1630 ;; 1631 remove) 1632 mv -f $_cur $_back 1633 ;; 1634 esac 1635} 1636 1637# make_symlink src link 1638# Make a symbolic link 'link' to src from basedir. If the 1639# directory in which link is to be created does not exist 1640# a warning will be displayed and an error will be returned. 1641# Returns 0 on success, 1 otherwise. 1642# 1643make_symlink() 1644{ 1645 local src link linkdir _me 1646 src="$1" 1647 link="$2" 1648 linkdir="`dirname $link`" 1649 _me="make_symlink()" 1650 1651 if [ -z "$src" -o -z "$link" ]; then 1652 warn "$_me: requires two arguments." 1653 return 1 1654 fi 1655 if [ ! -d "$linkdir" ]; then 1656 warn "$_me: the directory $linkdir does not exist." 1657 return 1 1658 fi 1659 if ! ln -sf $src $link; then 1660 warn "$_me: unable to make a symbolic link from $link to $src" 1661 return 1 1662 fi 1663 return 0 1664} 1665 1666# devfs_rulesets_from_file file 1667# Reads a set of devfs commands from file, and creates 1668# the specified rulesets with their rules. Returns non-zero 1669# if there was an error. 1670# 1671devfs_rulesets_from_file() 1672{ 1673 local file _err _me _opts 1674 file="$1" 1675 _me="devfs_rulesets_from_file" 1676 _err=0 1677 1678 if [ -z "$file" ]; then 1679 warn "$_me: you must specify a file" 1680 return 1 1681 fi 1682 if [ ! -e "$file" ]; then 1683 debug "$_me: no such file ($file)" 1684 return 0 1685 fi 1686 1687 # Disable globbing so that the rule patterns are not expanded 1688 # by accident with matching filesystem entries. 1689 _opts=$-; set -f 1690 1691 debug "reading rulesets from file ($file)" 1692 { while read line 1693 do 1694 case $line in 1695 \#*) 1696 continue 1697 ;; 1698 \[*\]*) 1699 rulenum=`expr "$line" : "\[.*=\([0-9]*\)\]"` 1700 if [ -z "$rulenum" ]; then 1701 warn "$_me: cannot extract rule number ($line)" 1702 _err=1 1703 break 1704 fi 1705 rulename=`expr "$line" : "\[\(.*\)=[0-9]*\]"` 1706 if [ -z "$rulename" ]; then 1707 warn "$_me: cannot extract rule name ($line)" 1708 _err=1 1709 break; 1710 fi 1711 eval $rulename=\$rulenum 1712 debug "found ruleset: $rulename=$rulenum" 1713 if ! /sbin/devfs rule -s $rulenum delset; then 1714 _err=1 1715 break 1716 fi 1717 ;; 1718 *) 1719 rulecmd="${line%%"\#*"}" 1720 # evaluate the command incase it includes 1721 # other rules 1722 if [ -n "$rulecmd" ]; then 1723 debug "adding rule ($rulecmd)" 1724 if ! eval /sbin/devfs rule -s $rulenum $rulecmd 1725 then 1726 _err=1 1727 break 1728 fi 1729 fi 1730 ;; 1731 esac 1732 if [ $_err -ne 0 ]; then 1733 debug "error in $_me" 1734 break 1735 fi 1736 done } < $file 1737 case $_opts in *f*) ;; *) set +f ;; esac 1738 return $_err 1739} 1740 1741# devfs_init_rulesets 1742# Initializes rulesets from configuration files. Returns 1743# non-zero if there was an error. 1744# 1745devfs_init_rulesets() 1746{ 1747 local file _me 1748 _me="devfs_init_rulesets" 1749 1750 # Go through this only once 1751 if [ -n "$devfs_rulesets_init" ]; then 1752 debug "$_me: devfs rulesets already initialized" 1753 return 1754 fi 1755 for file in $devfs_rulesets; do 1756 if ! devfs_rulesets_from_file $file; then 1757 warn "$_me: could not read rules from $file" 1758 return 1 1759 fi 1760 done 1761 devfs_rulesets_init=1 1762 debug "$_me: devfs rulesets initialized" 1763 return 0 1764} 1765 1766# devfs_set_ruleset ruleset [dir] 1767# Sets the default ruleset of dir to ruleset. The ruleset argument 1768# must be a ruleset name as specified in devfs.rules(5) file. 1769# Returns non-zero if it could not set it successfully. 1770# 1771devfs_set_ruleset() 1772{ 1773 local devdir rs _me 1774 [ -n "$1" ] && eval rs=\$$1 || rs= 1775 [ -n "$2" ] && devdir="-m "$2"" || devdir= 1776 _me="devfs_set_ruleset" 1777 1778 if [ -z "$rs" ]; then 1779 warn "$_me: you must specify a ruleset number" 1780 return 1 1781 fi 1782 debug "$_me: setting ruleset ($rs) on mount-point (${devdir#-m })" 1783 if ! /sbin/devfs $devdir ruleset $rs; then 1784 warn "$_me: unable to set ruleset $rs to ${devdir#-m }" 1785 return 1 1786 fi 1787 return 0 1788} 1789 1790# devfs_apply_ruleset ruleset [dir] 1791# Apply ruleset number $ruleset to the devfs mountpoint $dir. 1792# The ruleset argument must be a ruleset name as specified 1793# in a devfs.rules(5) file. Returns 0 on success or non-zero 1794# if it could not apply the ruleset. 1795# 1796devfs_apply_ruleset() 1797{ 1798 local devdir rs _me 1799 [ -n "$1" ] && eval rs=\$$1 || rs= 1800 [ -n "$2" ] && devdir="-m "$2"" || devdir= 1801 _me="devfs_apply_ruleset" 1802 1803 if [ -z "$rs" ]; then 1804 warn "$_me: you must specify a ruleset" 1805 return 1 1806 fi 1807 debug "$_me: applying ruleset ($rs) to mount-point (${devdir#-m })" 1808 if ! /sbin/devfs $devdir rule -s $rs applyset; then 1809 warn "$_me: unable to apply ruleset $rs to ${devdir#-m }" 1810 return 1 1811 fi 1812 return 0 1813} 1814 1815# devfs_domount dir [ruleset] 1816# Mount devfs on dir. If ruleset is specified it is set 1817# on the mount-point. It must also be a ruleset name as specified 1818# in a devfs.rules(5) file. Returns 0 on success. 1819# 1820devfs_domount() 1821{ 1822 local devdir rs _me 1823 devdir="$1" 1824 [ -n "$2" ] && rs=$2 || rs= 1825 _me="devfs_domount()" 1826 1827 if [ -z "$devdir" ]; then 1828 warn "$_me: you must specify a mount-point" 1829 return 1 1830 fi 1831 debug "$_me: mount-point is ($devdir), ruleset is ($rs)" 1832 if ! mount -t devfs dev "$devdir"; then 1833 warn "$_me: Unable to mount devfs on $devdir" 1834 return 1 1835 fi 1836 if [ -n "$rs" ]; then 1837 devfs_init_rulesets 1838 devfs_set_ruleset $rs $devdir 1839 devfs -m $devdir rule applyset 1840 fi 1841 return 0 1842} 1843 1844# Provide a function for normalizing the mounting of memory 1845# filesystems. This should allow the rest of the code here to remain 1846# as close as possible between 5-current and 4-stable. 1847# $1 = size 1848# $2 = mount point 1849# $3 = (optional) extra mdmfs flags 1850mount_md() 1851{ 1852 if [ -n "$3" ]; then 1853 flags="$3" 1854 fi 1855 /sbin/mdmfs $flags -s $1 ${mfs_type} $2 1856} 1857 1858# Code common to scripts that need to load a kernel module 1859# if it isn't in the kernel yet. Syntax: 1860# load_kld [-e regex] [-m module] file 1861# where -e or -m chooses the way to check if the module 1862# is already loaded: 1863# regex is egrep'd in the output from `kldstat -v', 1864# module is passed to `kldstat -m'. 1865# The default way is as though `-m file' were specified. 1866load_kld() 1867{ 1868 local _loaded _mod _opt _re 1869 1870 while getopts "e:m:" _opt; do 1871 case "$_opt" in 1872 e) _re="$OPTARG" ;; 1873 m) _mod="$OPTARG" ;; 1874 *) err 3 'USAGE: load_kld [-e regex] [-m module] file' ;; 1875 esac 1876 done 1877 shift $(($OPTIND - 1)) 1878 if [ $# -ne 1 ]; then 1879 err 3 'USAGE: load_kld [-e regex] [-m module] file' 1880 fi 1881 _mod=${_mod:-$1} 1882 _loaded=false 1883 if [ -n "$_re" ]; then 1884 if kldstat -v | egrep -q -e "$_re"; then 1885 _loaded=true 1886 fi 1887 else 1888 if kldstat -q -m "$_mod"; then 1889 _loaded=true 1890 fi 1891 fi 1892 if ! $_loaded; then 1893 if ! kldload "$1"; then 1894 warn "Unable to load kernel module $1" 1895 return 1 1896 else 1897 info "$1 kernel module loaded." 1898 fi 1899 else 1900 debug "load_kld: $1 kernel module already loaded." 1901 fi 1902 return 0 1903} 1904 1905# ltr str src dst [var] 1906# Change every $src in $str to $dst. 1907# Useful when /usr is not yet mounted and we cannot use tr(1), sed(1) nor 1908# awk(1). If var is non-NULL, set it to the result. 1909ltr() 1910{ 1911 local _str _src _dst _out _com _var 1912 _str="$1" 1913 _src="$2" 1914 _dst="$3" 1915 _var="$4" 1916 _out="" 1917 1918 local IFS="${_src}" 1919 for _com in ${_str}; do 1920 if [ -z "${_out}" ]; then 1921 _out="${_com}" 1922 else 1923 _out="${_out}${_dst}${_com}" 1924 fi 1925 done 1926 if [ -n "${_var}" ]; then 1927 setvar "${_var}" "${_out}" 1928 else 1929 echo "${_out}" 1930 fi 1931} 1932 1933# Creates a list of providers for GELI encryption. 1934geli_make_list() 1935{ 1936 local devices devices2 1937 local provider mountpoint type options rest 1938 1939 # Create list of GELI providers from fstab. 1940 while read provider mountpoint type options rest ; do 1941 case ":${options}" in 1942 :*noauto*) 1943 noauto=yes 1944 ;; 1945 *) 1946 noauto=no 1947 ;; 1948 esac 1949 1950 case ":${provider}" in 1951 :#*) 1952 continue 1953 ;; 1954 *.eli) 1955 # Skip swap devices. 1956 if [ "${type}" = "swap" -o "${options}" = "sw" -o "${noauto}" = "yes" ]; then 1957 continue 1958 fi 1959 devices="${devices} ${provider}" 1960 ;; 1961 esac 1962 done < /etc/fstab 1963 1964 # Append providers from geli_devices. 1965 devices="${devices} ${geli_devices}" 1966 1967 for provider in ${devices}; do 1968 provider=${provider%.eli} 1969 provider=${provider#/dev/} 1970 devices2="${devices2} ${provider}" 1971 done 1972 1973 echo ${devices2} 1974} 1975 1976# Originally, root mount hold had to be released before mounting 1977# the root filesystem. This delayed the boot, so it was changed 1978# to only wait if the root device isn't readily available. This 1979# can result in rc scripts executing before all the devices - such 1980# as graid(8), or USB disks - can be accessed. This function can 1981# be used to explicitly wait for root mount holds to be released. 1982root_hold_wait() 1983{ 1984 local wait waited holders 1985 1986 waited=0 1987 while true; do 1988 holders="$(sysctl -n vfs.root_mount_hold)" 1989 if [ -z "${holders}" ]; then 1990 break; 1991 fi 1992 if [ ${waited} -eq 0 ]; then 1993 echo -n "Waiting ${root_hold_delay}s" \ 1994 "for the root mount holders: ${holders}" 1995 else 1996 echo -n . 1997 fi 1998 if [ ${waited} -ge ${root_hold_delay} ]; then 1999 echo 2000 break 2001 fi 2002 sleep 1 2003 waited=$(($waited + 1)) 2004 done 2005} 2006 2007# Find scripts in local_startup directories that use the old syntax 2008# 2009find_local_scripts_old() { 2010 zlist='' 2011 slist='' 2012 for dir in ${local_startup}; do 2013 if [ -d "${dir}" ]; then 2014 for file in ${dir}/[0-9]*.sh; do 2015 grep '^# PROVIDE:' $file >/dev/null 2>&1 && 2016 continue 2017 zlist="$zlist $file" 2018 done 2019 for file in ${dir}/[!0-9]*.sh; do 2020 grep '^# PROVIDE:' $file >/dev/null 2>&1 && 2021 continue 2022 slist="$slist $file" 2023 done 2024 fi 2025 done 2026} 2027 2028find_local_scripts_new() { 2029 local_rc='' 2030 for dir in ${local_startup}; do 2031 if [ -d "${dir}" ]; then 2032 for file in `grep -l '^# PROVIDE:' ${dir}/* 2>/dev/null`; do 2033 case "$file" in 2034 *.sample) ;; 2035 *) if [ -x "$file" ]; then 2036 local_rc="${local_rc} ${file}" 2037 fi 2038 ;; 2039 esac 2040 done 2041 fi 2042 done 2043} 2044 2045# check_required_{before|after} command 2046# Check for things required by the command before and after its precmd, 2047# respectively. The two separate functions are needed because some 2048# conditions should prevent precmd from being run while other things 2049# depend on precmd having already been run. 2050# 2051check_required_before() 2052{ 2053 local _f 2054 2055 case "$1" in 2056 start) 2057 for _f in $required_vars; do 2058 if ! checkyesno $_f; then 2059 warn "\$${_f} is not enabled." 2060 if [ -z "$rc_force" ]; then 2061 return 1 2062 fi 2063 fi 2064 done 2065 2066 for _f in $required_dirs; do 2067 if [ ! -d "${_f}/." ]; then 2068 warn "${_f} is not a directory." 2069 if [ -z "$rc_force" ]; then 2070 return 1 2071 fi 2072 fi 2073 done 2074 2075 for _f in $required_files; do 2076 if [ ! -r "${_f}" ]; then 2077 warn "${_f} is not readable." 2078 if [ -z "$rc_force" ]; then 2079 return 1 2080 fi 2081 fi 2082 done 2083 ;; 2084 esac 2085 2086 return 0 2087} 2088 2089check_required_after() 2090{ 2091 local _f _args 2092 2093 case "$1" in 2094 start) 2095 for _f in $required_modules; do 2096 case "${_f}" in 2097 *~*) _args="-e ${_f#*~} ${_f%%~*}" ;; 2098 *:*) _args="-m ${_f#*:} ${_f%%:*}" ;; 2099 *) _args="${_f}" ;; 2100 esac 2101 if ! load_kld ${_args}; then 2102 if [ -z "$rc_force" ]; then 2103 return 1 2104 fi 2105 fi 2106 done 2107 ;; 2108 esac 2109 2110 return 0 2111} 2112 2113# check_jail mib 2114# Return true if security.jail.$mib exists and set to 1. 2115 2116check_jail() 2117{ 2118 local _mib _v 2119 2120 _mib=$1 2121 if _v=$(${SYSCTL_N} "security.jail.$_mib" 2> /dev/null); then 2122 case $_v in 2123 1) return 0;; 2124 esac 2125 fi 2126 return 1 2127} 2128 2129# check_kern_features mib 2130# Return existence of kern.features.* sysctl MIB as true or 2131# false. The result will be cached in $_rc_cache_kern_features_ 2132# namespace. "0" means the kern.features.X exists. 2133 2134check_kern_features() 2135{ 2136 local _v 2137 2138 [ -n "$1" ] || return 1; 2139 eval _v=\$_rc_cache_kern_features_$1 2140 [ -n "$_v" ] && return "$_v"; 2141 2142 if ${SYSCTL_N} kern.features.$1 > /dev/null 2>&1; then 2143 eval _rc_cache_kern_features_$1=0 2144 return 0 2145 else 2146 eval _rc_cache_kern_features_$1=1 2147 return 1 2148 fi 2149} 2150 2151# check_namevarlist var 2152# Return "0" if ${name}_var is reserved in rc.subr. 2153 2154_rc_namevarlist="program chroot chdir env flags fib nice user group groups prepend" 2155check_namevarlist() 2156{ 2157 local _v 2158 2159 for _v in $_rc_namevarlist; do 2160 case $1 in 2161 $_v) return 0 ;; 2162 esac 2163 done 2164 2165 return 1 2166} 2167 2168# _echoonce var msg mode 2169# mode=0: Echo $msg if ${$var} is empty. 2170# After doing echo, a string is set to ${$var}. 2171# 2172# mode=1: Echo $msg if ${$var} is a string with non-zero length. 2173# 2174_echoonce() 2175{ 2176 local _var _msg _mode 2177 eval _var=\$$1 2178 _msg=$2 2179 _mode=$3 2180 2181 case $_mode in 2182 1) [ -n "$_var" ] && echo "$_msg" ;; 2183 *) [ -z "$_var" ] && echo -n "$_msg" && eval "$1=finished" ;; 2184 esac 2185} 2186 2187# If the loader env variable rc.debug is set, turn on debugging. rc.conf will 2188# still override this, but /etc/defaults/rc.conf can't unconditionally set this 2189# since it would undo what we've done here. 2190if kenv -q rc.debug > /dev/null ; then 2191 rc_debug=YES 2192fi 2193