1# Make and install tzdb code and data. 2 3# This file is in the public domain, so clarified as of 4# 2009-05-17 by Arthur David Olson. 5 6# Package name for the code distribution. 7PACKAGE= tzcode 8 9# Version number for the distribution, overridden in the 'tarballs' rule below. 10VERSION= unknown 11 12# Email address for bug reports. 13BUGEMAIL= tz@iana.org 14 15# DATAFORM selects the data format. 16# Available formats represent essentially the same data, albeit 17# possibly with minor discrepancies that users are not likely to notice. 18# To get new features and the best data right away, use: 19# DATAFORM= vanguard 20# To wait a while before using new features, to give downstream users 21# time to upgrade zic (the default), use: 22# DATAFORM= main 23# To wait even longer for new features, use: 24# DATAFORM= rearguard 25# Rearguard users might also want "ZFLAGS = -b fat"; see below. 26DATAFORM= main 27 28# Change the line below for your timezone (after finding the one you want in 29# one of the $(TDATA) source files, or adding it to a source file). 30# Alternatively, if you discover you've got the wrong timezone, you can just 31# 'zic -l -' to remove it, or 'zic -l rightzone' to change it. 32# Use the command 33# make zonenames 34# to get a list of the values you can use for LOCALTIME. 35 36LOCALTIME= Factory 37 38# The POSIXRULES macro controls interpretation of POSIX-like TZ 39# settings like TZ='EET-2EEST' that lack DST transition rules. 40# If POSIXRULES is '-', no template is installed; this is the default. 41# Any other value for POSIXRULES is obsolete and should not be relied on, as: 42# * It does not work correctly in popular implementations such as GNU/Linux. 43# * It does not work even in tzcode, except for historical timestamps 44# that precede the last explicit transition in the POSIXRULES file. 45# Hence it typically does not work for current and future timestamps. 46# If, despite the above, you want a template for handling these settings, 47# you can change the line below (after finding the timezone you want in the 48# one of the $(TDATA) source files, or adding it to a source file). 49# Alternatively, if you discover you've got the wrong timezone, you can just 50# 'zic -p -' to remove it, or 'zic -p rightzone' to change it. 51# Use the command 52# make zonenames 53# to get a list of the values you can use for POSIXRULES. 54 55POSIXRULES= - 56 57# Also see TZDEFRULESTRING below, which takes effect only 58# if POSIXRULES is '-' or if the template file cannot be accessed. 59 60 61# Installation locations. 62# 63# The defaults are suitable for Debian, except that if REDO is 64# posix_right or right_posix then files that Debian puts under 65# /usr/share/zoneinfo/posix and /usr/share/zoneinfo/right are instead 66# put under /usr/share/zoneinfo-posix and /usr/share/zoneinfo-leaps, 67# respectively. Problems with the Debian approach are discussed in 68# the commentary for the right_posix rule (below). 69 70# Destination directory, which can be used for staging. 71# 'make DESTDIR=/stage install' installs under /stage (e.g., to 72# /stage/etc/localtime instead of to /etc/localtime). Files under 73# /stage are not intended to work as-is, but can be copied by hand to 74# the root directory later. If DESTDIR is empty, 'make install' does 75# not stage, but installs directly into production locations. 76DESTDIR = 77 78# Everything is installed into subdirectories of TOPDIR, and used there. 79# TOPDIR should be empty (meaning the root directory), 80# or a directory name that does not end in "/". 81# TOPDIR should be empty or an absolute name unless you're just testing. 82TOPDIR = 83 84# The default local timezone is taken from the file TZDEFAULT. 85TZDEFAULT = $(TOPDIR)/etc/localtime 86 87# The subdirectory containing installed program and data files, and 88# likewise for installed files that can be shared among architectures. 89# These should be relative file names. 90USRDIR = usr 91USRSHAREDIR = $(USRDIR)/share 92 93# "Compiled" timezone information is placed in the "TZDIR" directory 94# (and subdirectories). 95# TZDIR_BASENAME should not contain "/" and should not be ".", ".." or empty. 96TZDIR_BASENAME= zoneinfo 97TZDIR = $(TOPDIR)/$(USRSHAREDIR)/$(TZDIR_BASENAME) 98 99# The "tzselect" and (if you do "make INSTALL") "date" commands go in: 100BINDIR = $(TOPDIR)/$(USRDIR)/bin 101 102# The "zdump" command goes in: 103ZDUMPDIR = $(BINDIR) 104 105# The "zic" command goes in: 106ZICDIR = $(TOPDIR)/$(USRDIR)/sbin 107 108# Manual pages go in subdirectories of. . . 109MANDIR = $(TOPDIR)/$(USRSHAREDIR)/man 110 111# Library functions are put in an archive in LIBDIR. 112LIBDIR = $(TOPDIR)/$(USRDIR)/lib 113 114 115# Types to try, as an alternative to time_t. 116TIME_T_ALTERNATIVES = $(TIME_T_ALTERNATIVES_HEAD) $(TIME_T_ALTERNATIVES_TAIL) 117TIME_T_ALTERNATIVES_HEAD = int_least64_t 118TIME_T_ALTERNATIVES_TAIL = int_least32_t uint_least32_t uint_least64_t 119 120# What kind of TZif data files to generate. (TZif is the binary time 121# zone data format that zic generates; see Internet RFC 8536.) 122# If you want only POSIX time, with time values interpreted as 123# seconds since the epoch (not counting leap seconds), use 124# REDO= posix_only 125# below. If you want only "right" time, with values interpreted 126# as seconds since the epoch (counting leap seconds), use 127# REDO= right_only 128# below. If you want both sets of data available, with leap seconds not 129# counted normally, use 130# REDO= posix_right 131# below. If you want both sets of data available, with leap seconds counted 132# normally, use 133# REDO= right_posix 134# below. POSIX mandates that leap seconds not be counted; for compatibility 135# with it, use "posix_only" or "posix_right". Use POSIX time on systems with 136# leap smearing; this can work better than unsmeared "right" time with 137# applications that are not leap second aware, and is closer to unsmeared 138# "right" time than unsmeared POSIX time is (e.g., 0.5 vs 1.0 s max error). 139 140REDO= posix_right 141 142# Whether to put an "Expires" line in the leapseconds file. 143# Use EXPIRES_LINE=1 to put the line in, 0 to omit it. 144# The EXPIRES_LINE value matters only if REDO's value contains "right". 145# If you change EXPIRES_LINE, remove the leapseconds file before running "make". 146# zic's support for the Expires line was introduced in tzdb 2020a, 147# and was modified in tzdb 2021b to generate version 4 TZif files. 148# EXPIRES_LINE defaults to 0 for now so that the leapseconds file 149# can be given to pre-2020a zic implementations and so that TZif files 150# built by newer zic implementations can be read by pre-2021b libraries. 151EXPIRES_LINE= 0 152 153# To install data in text form that has all the information of the TZif data, 154# (optionally incorporating leap second information), use 155# TZDATA_TEXT= tzdata.zi leapseconds 156# To install text data without leap second information (e.g., because 157# REDO='posix_only'), use 158# TZDATA_TEXT= tzdata.zi 159# To avoid installing text data, use 160# TZDATA_TEXT= 161 162TZDATA_TEXT= leapseconds tzdata.zi 163 164# For backward-compatibility links for old zone names, use 165# BACKWARD= backward 166# To omit these links, use 167# BACKWARD= 168 169BACKWARD= backward 170 171# If you want out-of-scope and often-wrong data from the file 'backzone', 172# but only for entries listed in the backward-compatibility file zone.tab, use 173# PACKRATDATA= backzone 174# PACKRATLIST= zone.tab 175# If you want all the 'backzone' data, use 176# PACKRATDATA= backzone 177# PACKRATLIST= 178# To omit this data, use 179# PACKRATDATA= 180# PACKRATLIST= 181 182PACKRATDATA= 183PACKRATLIST= 184 185# The name of a locale using the UTF-8 encoding, used during self-tests. 186# The tests are skipped if the name does not appear to work on this system. 187 188UTF8_LOCALE= en_US.utf8 189 190# Non-default libraries needed to link. 191# On some hosts, this should have -lintl unless CFLAGS has -DHAVE_GETTEXT=0. 192LDLIBS= 193 194# Add the following to the end of the "CFLAGS=" line as needed to override 195# defaults specified in the source code. "-DFOO" is equivalent to "-DFOO=1". 196# -DDEPRECATE_TWO_DIGIT_YEARS for optional runtime warnings about strftime 197# formats that generate only the last two digits of year numbers 198# -DEPOCH_LOCAL if the 'time' function returns local time not UT 199# -DEPOCH_OFFSET=N if the 'time' function returns a value N greater 200# than what POSIX specifies, assuming local time is UT. 201# For example, N is 252460800 on AmigaOS. 202# -DHAVE_DECL_ASCTIME_R=0 if <time.h> does not declare asctime_r 203# -DHAVE_DECL_ENVIRON if <unistd.h> declares 'environ' 204# -DHAVE_DECL_TIMEGM=0 if <time.h> does not declare timegm 205# -DHAVE_DIRECT_H if mkdir needs <direct.h> (MS-Windows) 206# -DHAVE__GENERIC=0 if _Generic does not work* 207# -DHAVE_GETRANDOM if getrandom works (e.g., GNU/Linux), 208# -DHAVE_GETRANDOM=0 to avoid using getrandom 209# -DHAVE_GETTEXT if gettext works (e.g., GNU/Linux, FreeBSD, Solaris), 210# where LDLIBS also needs to contain -lintl on some hosts; 211# -DHAVE_GETTEXT=0 to avoid using gettext 212# -DHAVE_INCOMPATIBLE_CTIME_R if your system's time.h declares 213# ctime_r and asctime_r incompatibly with the POSIX standard 214# (Solaris when _POSIX_PTHREAD_SEMANTICS is not defined). 215# -DHAVE_INTTYPES_H=0 if <inttypes.h> does not work*+ 216# -DHAVE_LINK=0 if your system lacks a link function 217# -DHAVE_LOCALTIME_R=0 if your system lacks a localtime_r function 218# -DHAVE_LOCALTIME_RZ=0 if you do not want zdump to use localtime_rz 219# localtime_rz can make zdump significantly faster, but is nonstandard. 220# -DHAVE_MALLOC_ERRNO=0 if malloc etc. do not set errno on failure. 221# -DHAVE_POSIX_DECLS=0 if your system's include files do not declare 222# functions like 'link' or variables like 'tzname' required by POSIX 223# -DHAVE_SETENV=0 if your system lacks the setenv function 224# -DHAVE_SNPRINTF=0 if your system lacks the snprintf function+ 225# -DHAVE_STDCKDINT_H=0 if neither <stdckdint.h> nor substitutes like 226# __builtin_add_overflow work* 227# -DHAVE_STDINT_H=0 if <stdint.h> does not work*+ 228# -DHAVE_STRFTIME_L if <time.h> declares locale_t and strftime_l 229# -DHAVE_STRDUP=0 if your system lacks the strdup function 230# -DHAVE_STRTOLL=0 if your system lacks the strtoll function+ 231# -DHAVE_SYMLINK=0 if your system lacks the symlink function 232# -DHAVE_SYS_STAT_H=0 if <sys/stat.h> does not work* 233# -DHAVE_TZSET=0 if your system lacks a tzset function 234# -DHAVE_UNISTD_H=0 if <unistd.h> does not work* 235# -DHAVE_UTMPX_H=0 if <utmpx.h> does not work* 236# -Dlocale_t=XXX if your system uses XXX instead of locale_t 237# -DPORT_TO_C89 if tzcode should also run on C89 platforms+ 238# -DRESERVE_STD_EXT_IDS if your platform reserves standard identifiers 239# with external linkage, e.g., applications cannot define 'localtime'. 240# -Dssize_t=long on hosts like MS-Windows that lack ssize_t 241# -DSUPPORT_C89 if the tzcode library should support C89 callers+ 242# -DSUPPRESS_TZDIR to not prepend TZDIR to file names; this has 243# security implications and is not recommended for general use 244# -DTHREAD_SAFE to make localtime.c thread-safe, as POSIX requires; 245# not needed by the main-program tz code, which is single-threaded. 246# Append other compiler flags as needed, e.g., -pthread on GNU/Linux. 247# -Dtime_tz=\"T\" to use T as the time_t type, rather than the system time_t 248# This is intended for internal use only; it mangles external names. 249# -DTZ_DOMAIN=\"foo\" to use "foo" for gettext domain name; default is "tz" 250# -DTZ_DOMAINDIR=\"/path\" to use "/path" for gettext directory; 251# the default is system-supplied, typically "/usr/lib/locale" 252# -DTZDEFRULESTRING=\",date/time,date/time\" to default to the specified 253# DST transitions for POSIX-style TZ strings lacking them, 254# in the usual case where POSIXRULES is '-'. If not specified, 255# TZDEFRULESTRING defaults to US rules for future DST transitions. 256# This mishandles some past timestamps, as US DST rules have changed. 257# It also mishandles settings like TZ='EET-2EEST' for eastern Europe, 258# as Europe and US DST rules differ. 259# -DTZNAME_MAXIMUM=N to limit time zone abbreviations to N bytes (default 255) 260# -DUNINIT_TRAP if reading uninitialized storage can cause problems 261# other than simply getting garbage data 262# -DUSE_LTZ=0 to build zdump with the system time zone library 263# Also set TZDOBJS=zdump.o and CHECK_TIME_T_ALTERNATIVES= below. 264# -DZIC_BLOAT_DEFAULT=\"fat\" to default zic's -b option to "fat", and 265# similarly for "slim". Fat TZif files work around incompatibilities 266# and bugs in some TZif readers, notably older ones that 267# ignore or otherwise mishandle 64-bit data in TZif files; 268# however, fat TZif files may trigger bugs in newer TZif readers. 269# Slim TZif files are more efficient, and are the default. 270# -DZIC_MAX_ABBR_LEN_WO_WARN=3 271# (or some other number) to set the maximum time zone abbreviation length 272# that zic will accept without a warning (the default is 6) 273# $(GCC_DEBUG_FLAGS) if you are using recent GCC and want lots of checking 274# 275# * Options marked "*" can be omitted if your compiler is C23 compatible. 276# * Options marked "+" are obsolescent and are planned to be removed 277# once the code assumes C99 or later. 278# 279# Select instrumentation via "make GCC_INSTRUMENT='whatever'". 280GCC_INSTRUMENT = \ 281 -fsanitize=undefined -fsanitize-address-use-after-scope \ 282 -fsanitize-undefined-trap-on-error -fstack-protector 283# Omit -fanalyzer from GCC_DEBUG_FLAGS, as it makes GCC too slow. 284GCC_DEBUG_FLAGS = -DGCC_LINT -g3 -O3 -fno-common \ 285 $(GCC_INSTRUMENT) \ 286 -Wall -Wextra \ 287 -Walloc-size-larger-than=100000 -Warray-bounds=2 \ 288 -Wbad-function-cast -Wbidi-chars=any,ucn -Wcast-align=strict -Wdate-time \ 289 -Wdeclaration-after-statement -Wdouble-promotion \ 290 -Wduplicated-branches -Wduplicated-cond \ 291 -Wformat=2 -Wformat-overflow=2 -Wformat-signedness -Wformat-truncation \ 292 -Wimplicit-fallthrough=5 -Winit-self -Wlogical-op \ 293 -Wmissing-declarations -Wmissing-prototypes -Wnested-externs \ 294 -Wnull-dereference \ 295 -Wold-style-definition -Woverlength-strings -Wpointer-arith \ 296 -Wshadow -Wshift-overflow=2 -Wstrict-overflow \ 297 -Wstrict-prototypes -Wstringop-overflow=4 \ 298 -Wstringop-truncation -Wsuggest-attribute=cold \ 299 -Wsuggest-attribute=const -Wsuggest-attribute=format \ 300 -Wsuggest-attribute=malloc \ 301 -Wsuggest-attribute=noreturn -Wsuggest-attribute=pure \ 302 -Wtrampolines -Wundef -Wuninitialized -Wunused-macros -Wuse-after-free=3 \ 303 -Wvariadic-macros -Wvla -Wwrite-strings \ 304 -Wno-address -Wno-format-nonliteral -Wno-sign-compare \ 305 -Wno-type-limits 306# 307# If your system has a "GMT offset" field in its "struct tm"s 308# (or if you decide to add such a field in your system's "time.h" file), 309# add the name to a define such as 310# -DTM_GMTOFF=tm_gmtoff 311# to the end of the "CFLAGS=" line. If not defined, the code attempts to 312# guess TM_GMTOFF from other macros; define NO_TM_GMTOFF to suppress this. 313# Similarly, if your system has a "zone abbreviation" field, define 314# -DTM_ZONE=tm_zone 315# and define NO_TM_ZONE to suppress any guessing. Although these two fields 316# not required by POSIX, a future version of POSIX is planned to require them 317# and they are widely available on GNU/Linux and BSD systems. 318# 319# The next batch of options control support for external variables 320# exported by tzcode. In practice these variables are less useful 321# than TM_GMTOFF and TM_ZONE. However, most of them are standardized. 322# # 323# # To omit or support the external variable "tzname", add one of: 324# # -DHAVE_TZNAME=0 # do not support "tzname" 325# # -DHAVE_TZNAME=1 # support "tzname", which is defined by system library 326# # -DHAVE_TZNAME=2 # support and define "tzname" 327# # to the "CFLAGS=" line. "tzname" is required by POSIX 1988 and later. 328# # If not defined, the code attempts to guess HAVE_TZNAME from other macros. 329# # Warning: unless time_tz is also defined, HAVE_TZNAME=1 can cause 330# # crashes when combined with some platforms' standard libraries, 331# # presumably due to memory allocation issues. 332# # 333# # To omit or support the external variables "timezone" and "daylight", add 334# # -DUSG_COMPAT=0 # do not support 335# # -DUSG_COMPAT=1 # support, and variables are defined by system library 336# # -DUSG_COMPAT=2 # support and define variables 337# # to the "CFLAGS=" line; "timezone" and "daylight" are inspired by 338# # Unix Systems Group code and are required by POSIX 2008 (with XSI) and later. 339# # If not defined, the code attempts to guess USG_COMPAT from other macros. 340# # 341# # To support the external variable "altzone", add 342# # -DALTZONE=0 # do not support 343# # -DALTZONE=1 # support "altzone", which is defined by system library 344# # -DALTZONE=2 # support and define "altzone" 345# # to the end of the "CFLAGS=" line; although "altzone" appeared in 346# # System V Release 3.1 it has not been standardized. 347# # If not defined, the code attempts to guess ALTZONE from other macros. 348# 349# If you want functions that were inspired by early versions of X3J11's work, 350# add 351# -DSTD_INSPIRED 352# to the end of the "CFLAGS=" line. This arranges for the following 353# functions to be added to the time conversion library. 354# "offtime" is like "gmtime" except that it accepts a second (long) argument 355# that gives an offset to add to the time_t when converting it. 356# "timelocal" is equivalent to "mktime". 357# "timeoff" is like "timegm" except that it accepts a second (long) argument 358# that gives an offset to use when converting to a time_t. 359# "posix2time" and "time2posix" are described in an included manual page. 360# X3J11's work does not describe any of these functions. 361# These functions may well disappear in future releases of the time 362# conversion package. 363# 364# If you don't want functions that were inspired by NetBSD, add 365# -DNETBSD_INSPIRED=0 366# to the end of the "CFLAGS=" line. Otherwise, the functions 367# "localtime_rz", "mktime_z", "tzalloc", and "tzfree" are added to the 368# time library, and if STD_INSPIRED is also defined to nonzero the functions 369# "posix2time_z" and "time2posix_z" are added as well. 370# The functions ending in "_z" (or "_rz") are like their unsuffixed 371# (or suffixed-by-"_r") counterparts, except with an extra first 372# argument of opaque type timezone_t that specifies the timezone. 373# "tzalloc" allocates a timezone_t value, and "tzfree" frees it. 374# 375# If you want to allocate state structures in localtime, add 376# -DALL_STATE 377# to the end of the "CFLAGS=" line. Storage is obtained by calling malloc. 378# 379# NIST-PCTS:151-2, Version 1.4, (1993-12-03) is a test suite put 380# out by the National Institute of Standards and Technology 381# which claims to test C and Posix conformance. If you want to pass PCTS, add 382# -DPCTS 383# to the end of the "CFLAGS=" line. 384# 385# If you want strict compliance with XPG4 as of 1994-04-09, add 386# -DXPG4_1994_04_09 387# to the end of the "CFLAGS=" line. This causes "strftime" to always return 388# 53 as a week number (rather than 52 or 53) for January days before 389# January's first Monday when a "%V" format is used and January 1 390# falls on a Friday, Saturday, or Sunday. 391 392CFLAGS= 393 394# Linker flags. Default to $(LFLAGS) for backwards compatibility 395# to release 2012h and earlier. 396 397LDFLAGS= $(LFLAGS) 398 399# For leap seconds, this Makefile uses LEAPSECONDS='-L leapseconds' in 400# submake command lines. The default is no leap seconds. 401 402LEAPSECONDS= 403 404# The zic command and its arguments. 405 406zic= ./zic 407ZIC= $(zic) $(ZFLAGS) 408 409# To shrink the size of installed TZif files, 410# append "-r @N" to omit data before N-seconds-after-the-Epoch. 411# To grow the files and work around bugs in older applications, 412# possibly at the expense of introducing bugs in newer ones, 413# append "-b fat"; see ZIC_BLOAT_DEFAULT above. 414# See the zic man page for more about -b and -r. 415ZFLAGS= 416 417# How to use zic to install TZif files. 418 419ZIC_INSTALL= $(ZIC) -d '$(DESTDIR)$(TZDIR)' $(LEAPSECONDS) 420 421# The name of a Posix-compliant 'awk' on your system. 422# mawk 1.3.3 and Solaris 10 /usr/bin/awk do not work. 423# Also, it is better (though not essential) if 'awk' supports UTF-8, 424# and unfortunately mawk and busybox awk do not support UTF-8. 425# Try AWK=gawk or AWK=nawk if your awk has the abovementioned problems. 426AWK= awk 427 428# The full path name of a Posix-compliant shell, preferably one that supports 429# the Korn shell's 'select' statement as an extension. 430# These days, Bash is the most popular. 431# It should be OK to set this to /bin/sh, on platforms where /bin/sh 432# lacks 'select' or doesn't completely conform to Posix, but /bin/bash 433# is typically nicer if it works. 434KSHELL= /bin/bash 435 436# Name of curl <https://curl.haxx.se/>, used for HTML validation. 437CURL= curl 438 439# Name of GNU Privacy Guard <https://gnupg.org/>, used to sign distributions. 440GPG= gpg 441 442# This expensive test requires USE_LTZ. 443# To suppress it, define this macro to be empty. 444CHECK_TIME_T_ALTERNATIVES = check_time_t_alternatives 445 446# SAFE_CHAR is a regular expression that matches a safe character. 447# Some parts of this distribution are limited to safe characters; 448# others can use any UTF-8 character. 449# For now, the safe characters are a safe subset of ASCII. 450# The caller must set the shell variable 'sharp' to the character '#', 451# since Makefile macros cannot contain '#'. 452# TAB_CHAR is a single tab character, in single quotes. 453TAB_CHAR= ' ' 454SAFE_CHARSET1= $(TAB_CHAR)' !\"'$$sharp'$$%&'\''()*+,./0123456789:;<=>?@' 455SAFE_CHARSET2= 'ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\^_`' 456SAFE_CHARSET3= 'abcdefghijklmnopqrstuvwxyz{|}~' 457SAFE_CHARSET= $(SAFE_CHARSET1)$(SAFE_CHARSET2)$(SAFE_CHARSET3) 458SAFE_CHAR= '[]'$(SAFE_CHARSET)'-]' 459 460# These non-alphabetic, non-ASCII printable characters are Latin-1, 461# and so are likely displayable even in editors like XEmacs 21 462# that have limited display capabilities. 463UNUSUAL_OK_LATIN_1 = ¡¢£¤¥¦§¨©«¬®¯°±²³´¶·¸¹»¼½¾¿×÷ 464# Non-ASCII non-letters that OK_CHAR allows, as these characters are 465# useful in commentary. 466UNUSUAL_OK_CHARSET= $(UNUSUAL_OK_LATIN_1) 467 468# Put this in a bracket expression to match spaces. 469s = [:space:] 470 471# OK_CHAR matches any character allowed in the distributed files. 472# This is the same as SAFE_CHAR, except that UNUSUAL_OK_CHARSET and 473# multibyte letters are also allowed so that commentary can contain a 474# few safe symbols and people's names and can quote non-English sources. 475# Other non-letters are limited to ASCII renderings for the 476# convenience of maintainers using XEmacs 21.5.34, which by default 477# mishandles Unicode characters U+0100 and greater. 478OK_CHAR= '[][:alpha:]$(UNUSUAL_OK_CHARSET)'$(SAFE_CHARSET)'-]' 479 480# SAFE_LINE matches a line of safe characters. 481# SAFE_SHARP_LINE is similar, except any OK character can follow '#'; 482# this is so that comments can contain non-ASCII characters. 483# OK_LINE matches a line of OK characters. 484SAFE_LINE= '^'$(SAFE_CHAR)'*$$' 485SAFE_SHARP_LINE='^'$(SAFE_CHAR)'*('$$sharp$(OK_CHAR)'*)?$$' 486OK_LINE= '^'$(OK_CHAR)'*$$' 487 488# Flags to give 'tar' when making a distribution. 489# Try to use flags appropriate for GNU tar. 490GNUTARFLAGS= --format=pax --pax-option='delete=atime,delete=ctime' \ 491 --numeric-owner --owner=0 --group=0 \ 492 --mode=go+u,go-w --sort=name 493TARFLAGS= `if tar $(GNUTARFLAGS) --version >/dev/null 2>&1; \ 494 then echo $(GNUTARFLAGS); \ 495 else :; \ 496 fi` 497 498# Flags to give 'gzip' when making a distribution. 499GZIPFLAGS= -9n 500 501# When comparing .tzs files, use GNU diff's -F'^TZ=' option if supported. 502# This makes it easier to see which Zone has been affected. 503DIFF_TZS= diff -u$$(! diff -u -F'^TZ=' - - <>/dev/null >&0 2>&1 \ 504 || echo ' -F^TZ=') 505 506############################################################################### 507 508#MAKE= make 509 510cc= cc 511CC= $(cc) -DTZDIR='"$(TZDIR)"' 512 513AR= ar 514 515# ':' on typical hosts; 'ranlib' on the ancient hosts that still need ranlib. 516RANLIB= : 517 518TZCOBJS= zic.o 519TZDOBJS= zdump.o localtime.o asctime.o strftime.o 520DATEOBJS= date.o localtime.o strftime.o asctime.o 521LIBSRCS= localtime.c asctime.c difftime.c strftime.c 522LIBOBJS= localtime.o asctime.o difftime.o strftime.o 523HEADERS= tzfile.h private.h 524NONLIBSRCS= zic.c zdump.c 525NEWUCBSRCS= date.c 526SOURCES= $(HEADERS) $(LIBSRCS) $(NONLIBSRCS) $(NEWUCBSRCS) \ 527 tzselect.ksh workman.sh 528MANS= newctime.3 newstrftime.3 newtzset.3 time2posix.3 \ 529 tzfile.5 tzselect.8 zic.8 zdump.8 530MANTXTS= newctime.3.txt newstrftime.3.txt newtzset.3.txt \ 531 time2posix.3.txt \ 532 tzfile.5.txt tzselect.8.txt zic.8.txt zdump.8.txt \ 533 date.1.txt 534COMMON= calendars CONTRIBUTING LICENSE Makefile \ 535 NEWS README SECURITY theory.html version 536WEB_PAGES= tz-art.html tz-how-to.html tz-link.html 537CHECK_WEB_PAGES=check_theory.html check_tz-art.html \ 538 check_tz-how-to.html check_tz-link.html 539DOCS= $(MANS) date.1 $(MANTXTS) $(WEB_PAGES) 540PRIMARY_YDATA= africa antarctica asia australasia \ 541 europe northamerica southamerica 542YDATA= $(PRIMARY_YDATA) etcetera 543NDATA= factory 544TDATA_TO_CHECK= $(YDATA) $(NDATA) backward 545TDATA= $(YDATA) $(NDATA) $(BACKWARD) 546ZONETABLES= zone1970.tab zone.tab 547TABDATA= iso3166.tab $(TZDATA_TEXT) $(ZONETABLES) 548LEAP_DEPS= leapseconds.awk leap-seconds.list 549TZDATA_ZI_DEPS= ziguard.awk zishrink.awk version $(TDATA) \ 550 $(PACKRATDATA) $(PACKRATLIST) 551DSTDATA_ZI_DEPS= ziguard.awk $(TDATA) $(PACKRATDATA) $(PACKRATLIST) 552DATA= $(TDATA_TO_CHECK) backzone iso3166.tab leap-seconds.list \ 553 leapseconds $(ZONETABLES) 554AWK_SCRIPTS= checklinks.awk checktab.awk leapseconds.awk \ 555 ziguard.awk zishrink.awk 556MISC= $(AWK_SCRIPTS) 557TZS_YEAR= 2050 558TZS_CUTOFF_FLAG= -c $(TZS_YEAR) 559TZS= to$(TZS_YEAR).tzs 560TZS_NEW= to$(TZS_YEAR)new.tzs 561TZS_DEPS= $(YDATA) asctime.c localtime.c \ 562 private.h tzfile.h zdump.c zic.c 563TZDATA_DIST = $(COMMON) $(DATA) $(MISC) 564# EIGHT_YARDS is just a yard short of the whole ENCHILADA. 565EIGHT_YARDS = $(TZDATA_DIST) $(DOCS) $(SOURCES) tzdata.zi 566ENCHILADA = $(EIGHT_YARDS) $(TZS) 567 568# Consult these files when deciding whether to rebuild the 'version' file. 569# This list is not the same as the output of 'git ls-files', since 570# .gitignore is not distributed. 571VERSION_DEPS= \ 572 calendars CONTRIBUTING LICENSE Makefile NEWS README SECURITY \ 573 africa antarctica asctime.c asia australasia \ 574 backward backzone \ 575 checklinks.awk checktab.awk \ 576 date.1 date.c difftime.c \ 577 etcetera europe factory iso3166.tab \ 578 leap-seconds.list leapseconds.awk localtime.c \ 579 newctime.3 newstrftime.3 newtzset.3 northamerica \ 580 private.h southamerica strftime.c theory.html \ 581 time2posix.3 tz-art.html tz-how-to.html tz-link.html \ 582 tzfile.5 tzfile.h tzselect.8 tzselect.ksh \ 583 workman.sh zdump.8 zdump.c zic.8 zic.c \ 584 ziguard.awk zishrink.awk \ 585 zone.tab zone1970.tab 586 587# And for the benefit of csh users on systems that assume the user 588# shell should be used to handle commands in Makefiles. . . 589 590SHELL= /bin/sh 591 592all: tzselect zic zdump libtz.a $(TABDATA) \ 593 vanguard.zi main.zi rearguard.zi 594 595ALL: all date $(ENCHILADA) 596 597install: all $(DATA) $(REDO) $(MANS) 598 mkdir -p '$(DESTDIR)$(BINDIR)' \ 599 '$(DESTDIR)$(ZDUMPDIR)' '$(DESTDIR)$(ZICDIR)' \ 600 '$(DESTDIR)$(LIBDIR)' \ 601 '$(DESTDIR)$(MANDIR)/man3' '$(DESTDIR)$(MANDIR)/man5' \ 602 '$(DESTDIR)$(MANDIR)/man8' 603 $(ZIC_INSTALL) -l $(LOCALTIME) \ 604 `case '$(POSIXRULES)' in ?*) echo '-p';; esac \ 605 ` $(POSIXRULES) \ 606 -t '$(DESTDIR)$(TZDEFAULT)' 607 cp -f $(TABDATA) '$(DESTDIR)$(TZDIR)/.' 608 cp tzselect '$(DESTDIR)$(BINDIR)/.' 609 cp zdump '$(DESTDIR)$(ZDUMPDIR)/.' 610 cp zic '$(DESTDIR)$(ZICDIR)/.' 611 cp libtz.a '$(DESTDIR)$(LIBDIR)/.' 612 $(RANLIB) '$(DESTDIR)$(LIBDIR)/libtz.a' 613 cp -f newctime.3 newtzset.3 '$(DESTDIR)$(MANDIR)/man3/.' 614 cp -f tzfile.5 '$(DESTDIR)$(MANDIR)/man5/.' 615 cp -f tzselect.8 zdump.8 zic.8 '$(DESTDIR)$(MANDIR)/man8/.' 616 617INSTALL: ALL install date.1 618 mkdir -p '$(DESTDIR)$(BINDIR)' '$(DESTDIR)$(MANDIR)/man1' 619 cp date '$(DESTDIR)$(BINDIR)/.' 620 cp -f date.1 '$(DESTDIR)$(MANDIR)/man1/.' 621 622# Calculate version number from git, if available. 623# Otherwise, use $(VERSION) unless it is "unknown" and there is already 624# a 'version' file, in which case reuse the existing 'version' contents 625# and append "-dirty" if the contents do not already end in "-dirty". 626version: $(VERSION_DEPS) 627 { (type git) >/dev/null 2>&1 && \ 628 V=`git describe --match '[0-9][0-9][0-9][0-9][a-z]*' \ 629 --abbrev=7 --dirty` || \ 630 if test '$(VERSION)' = unknown && V=`cat $@`; then \ 631 case $$V in *-dirty);; *) V=$$V-dirty;; esac; \ 632 else \ 633 V='$(VERSION)'; \ 634 fi; } && \ 635 printf '%s\n' "$$V" >$@.out 636 mv $@.out $@ 637 638# These files can be tailored by setting BACKWARD, PACKRATDATA, PACKRATLIST. 639vanguard.zi main.zi rearguard.zi: $(DSTDATA_ZI_DEPS) 640 $(AWK) \ 641 -v DATAFORM=`expr $@ : '\(.*\).zi'` \ 642 -v PACKRATDATA='$(PACKRATDATA)' \ 643 -v PACKRATLIST='$(PACKRATLIST)' \ 644 -f ziguard.awk \ 645 $(TDATA) $(PACKRATDATA) >$@.out 646 mv $@.out $@ 647# This file has a version comment that attempts to capture any tailoring 648# via BACKWARD, DATAFORM, PACKRATDATA, PACKRATLIST, and REDO. 649tzdata.zi: $(DATAFORM).zi version zishrink.awk 650 version=`sed 1q version` && \ 651 LC_ALL=C $(AWK) \ 652 -v dataform='$(DATAFORM)' \ 653 -v deps='$(DSTDATA_ZI_DEPS) zishrink.awk' \ 654 -v redo='$(REDO)' \ 655 -v version="$$version" \ 656 -f zishrink.awk \ 657 $(DATAFORM).zi >$@.out 658 mv $@.out $@ 659 660version.h: version 661 VERSION=`cat version` && printf '%s\n' \ 662 'static char const PKGVERSION[]="($(PACKAGE)) ";' \ 663 "static char const TZVERSION[]=\"$$VERSION\";" \ 664 'static char const REPORT_BUGS_TO[]="$(BUGEMAIL)";' \ 665 >$@.out 666 mv $@.out $@ 667 668zdump: $(TZDOBJS) 669 $(CC) -o $@ $(CFLAGS) $(LDFLAGS) $(TZDOBJS) $(LDLIBS) 670 671zic: $(TZCOBJS) 672 $(CC) -o $@ $(CFLAGS) $(LDFLAGS) $(TZCOBJS) $(LDLIBS) 673 674leapseconds: $(LEAP_DEPS) 675 $(AWK) -v EXPIRES_LINE=$(EXPIRES_LINE) \ 676 -f leapseconds.awk leap-seconds.list >$@.out 677 mv $@.out $@ 678 679# Arguments to pass to submakes of install_data. 680# They can be overridden by later submake arguments. 681INSTALLARGS = \ 682 BACKWARD='$(BACKWARD)' \ 683 DESTDIR='$(DESTDIR)' \ 684 LEAPSECONDS='$(LEAPSECONDS)' \ 685 PACKRATDATA='$(PACKRATDATA)' \ 686 PACKRATLIST='$(PACKRATLIST)' \ 687 TZDEFAULT='$(TZDEFAULT)' \ 688 TZDIR='$(TZDIR)' \ 689 ZIC='$(ZIC)' 690 691INSTALL_DATA_DEPS = zic leapseconds tzdata.zi 692 693# 'make install_data' installs one set of TZif files. 694install_data: $(INSTALL_DATA_DEPS) 695 $(ZIC_INSTALL) tzdata.zi 696 697posix_only: $(INSTALL_DATA_DEPS) 698 $(MAKE) $(INSTALLARGS) LEAPSECONDS= install_data 699 700right_only: $(INSTALL_DATA_DEPS) 701 $(MAKE) $(INSTALLARGS) LEAPSECONDS='-L leapseconds' \ 702 install_data 703 704# In earlier versions of this makefile, the other two directories were 705# subdirectories of $(TZDIR). However, this led to configuration errors. 706# For example, with posix_right under the earlier scheme, 707# TZ='right/Australia/Adelaide' got you localtime with leap seconds, 708# but gmtime without leap seconds, which led to problems with applications 709# like sendmail that subtract gmtime from localtime. 710# Therefore, the other two directories are now siblings of $(TZDIR). 711# You must replace all of $(TZDIR) to switch from not using leap seconds 712# to using them, or vice versa. 713right_posix: right_only 714 rm -fr '$(DESTDIR)$(TZDIR)-leaps' 715 ln -s '$(TZDIR_BASENAME)' '$(DESTDIR)$(TZDIR)-leaps' || \ 716 $(MAKE) $(INSTALLARGS) TZDIR='$(TZDIR)-leaps' right_only 717 $(MAKE) $(INSTALLARGS) TZDIR='$(TZDIR)-posix' posix_only 718 719posix_right: posix_only 720 rm -fr '$(DESTDIR)$(TZDIR)-posix' 721 ln -s '$(TZDIR_BASENAME)' '$(DESTDIR)$(TZDIR)-posix' || \ 722 $(MAKE) $(INSTALLARGS) TZDIR='$(TZDIR)-posix' posix_only 723 $(MAKE) $(INSTALLARGS) TZDIR='$(TZDIR)-leaps' right_only 724 725zones: $(REDO) 726 727# dummy.zd is not a real file; it is mentioned here only so that the 728# top-level 'make' does not have a syntax error. 729ZDS = dummy.zd 730# Rule used only by submakes invoked by the $(TZS_NEW) rule. 731# It is separate so that GNU 'make -j' can run instances in parallel. 732$(ZDS): zdump 733 ./zdump -i $(TZS_CUTOFF_FLAG) '$(wd)/'$$(expr $@ : '\(.*\).zd') \ 734 >$@ 735 736TZS_NEW_DEPS = tzdata.zi zdump zic 737$(TZS_NEW): $(TZS_NEW_DEPS) 738 rm -fr tzs$(TZS_YEAR).dir 739 mkdir tzs$(TZS_YEAR).dir 740 $(zic) -d tzs$(TZS_YEAR).dir tzdata.zi 741 $(AWK) '/^L/{print "Link\t" $$2 "\t" $$3}' \ 742 tzdata.zi | LC_ALL=C sort >$@.out 743 wd=`pwd` && \ 744 x=`$(AWK) '/^Z/{print "tzs$(TZS_YEAR).dir/" $$2 ".zd"}' \ 745 tzdata.zi \ 746 | LC_ALL=C sort -t . -k 2,2` && \ 747 set x $$x && \ 748 shift && \ 749 ZDS=$$* && \ 750 $(MAKE) wd="$$wd" TZS_CUTOFF_FLAG="$(TZS_CUTOFF_FLAG)" \ 751 ZDS="$$ZDS" $$ZDS && \ 752 sed 's,^TZ=".*\.dir/,TZ=",' $$ZDS >>$@.out 753 rm -fr tzs$(TZS_YEAR).dir 754 mv $@.out $@ 755 756# If $(TZS) exists but 'make check_tzs' fails, a maintainer should inspect the 757# failed output and fix the inconsistency, perhaps by running 'make force_tzs'. 758$(TZS): 759 touch $@ 760 761force_tzs: $(TZS_NEW) 762 cp $(TZS_NEW) $(TZS) 763 764libtz.a: $(LIBOBJS) 765 rm -f $@ 766 $(AR) -rc $@ $(LIBOBJS) 767 $(RANLIB) $@ 768 769date: $(DATEOBJS) 770 $(CC) -o $@ $(CFLAGS) $(LDFLAGS) $(DATEOBJS) $(LDLIBS) 771 772tzselect: tzselect.ksh version 773 VERSION=`cat version` && sed \ 774 -e 's|#!/bin/bash|#!$(KSHELL)|g' \ 775 -e 's|AWK=[^}]*|AWK='\''$(AWK)'\''|g' \ 776 -e 's|\(PKGVERSION\)=.*|\1='\''($(PACKAGE)) '\''|' \ 777 -e 's|\(REPORT_BUGS_TO\)=.*|\1=$(BUGEMAIL)|' \ 778 -e 's|TZDIR=[^}]*|TZDIR=$(TZDIR)|' \ 779 -e 's|\(TZVERSION\)=.*|\1='"$$VERSION"'|' \ 780 <$@.ksh >$@.out 781 chmod +x $@.out 782 mv $@.out $@ 783 784check: check_back check_mild 785check_mild: check_character_set check_white_space check_links \ 786 check_name_lengths check_slashed_abbrs check_sorted \ 787 check_tables check_web check_ziguard check_zishrink check_tzs 788 789check_character_set: $(ENCHILADA) 790 test ! '$(UTF8_LOCALE)' || \ 791 ! printf 'A\304\200B\n' | \ 792 LC_ALL='$(UTF8_LOCALE)' grep -q '^A.B$$' >/dev/null 2>&1 || { \ 793 LC_ALL='$(UTF8_LOCALE)' && export LC_ALL && \ 794 sharp='#' && \ 795 ! grep -Env $(SAFE_LINE) $(MANS) date.1 $(MANTXTS) \ 796 $(MISC) $(SOURCES) $(WEB_PAGES) \ 797 CONTRIBUTING LICENSE README SECURITY \ 798 version tzdata.zi && \ 799 ! grep -Env $(SAFE_LINE)'|^UNUSUAL_OK_'$(OK_CHAR)'*$$' \ 800 Makefile && \ 801 ! grep -Env $(SAFE_SHARP_LINE) $(TDATA_TO_CHECK) backzone \ 802 leapseconds zone.tab && \ 803 ! grep -Env $(OK_LINE) $(ENCHILADA); \ 804 } 805 touch $@ 806 807check_white_space: $(ENCHILADA) 808 patfmt=' \t|[\f\r\v]' && pat=`printf "$$patfmt\\n"` && \ 809 ! grep -En "$$pat" \ 810 $$(ls $(ENCHILADA) | grep -Fvx leap-seconds.list) 811 ! grep -n '[$s]$$' \ 812 $$(ls $(ENCHILADA) | grep -Fvx leap-seconds.list) 813 touch $@ 814 815PRECEDES_FILE_NAME = ^(Zone|Link[$s]+[^$s]+)[$s]+ 816FILE_NAME_COMPONENT_TOO_LONG = $(PRECEDES_FILE_NAME)[^$s]*[^/$s]{15} 817 818check_name_lengths: $(TDATA_TO_CHECK) backzone 819 ! grep -En '$(FILE_NAME_COMPONENT_TOO_LONG)' \ 820 $(TDATA_TO_CHECK) backzone 821 touch $@ 822 823PRECEDES_STDOFF = ^(Zone[$s]+[^$s]+)?[$s]+ 824STDOFF = [-+]?[0-9:.]+ 825RULELESS_SAVE = (-|$(STDOFF)[sd]?) 826RULELESS_SLASHED_ABBRS = \ 827 $(PRECEDES_STDOFF)$(STDOFF)[$s]+$(RULELESS_SAVE)[$s]+[^$s]*/ 828 829check_slashed_abbrs: $(TDATA_TO_CHECK) 830 ! grep -En '$(RULELESS_SLASHED_ABBRS)' $(TDATA_TO_CHECK) 831 touch $@ 832 833CHECK_CC_LIST = { n = split($$1,a,/,/); for (i=2; i<=n; i++) print a[1], a[i]; } 834 835check_sorted: backward backzone 836 $(AWK) '/^Link/ {printf "%.5d %s\n", g, $$3} !/./ {g++}' \ 837 backward | LC_ALL=C sort -cu 838 $(AWK) '/^Zone/ {print $$2}' backzone | LC_ALL=C sort -cu 839 touch $@ 840 841check_back: checklinks.awk $(TDATA_TO_CHECK) 842 $(AWK) \ 843 -v DATAFORM=$(DATAFORM) \ 844 -v backcheck=backward \ 845 -f checklinks.awk $(TDATA_TO_CHECK) 846 touch $@ 847 848check_links: checklinks.awk tzdata.zi 849 $(AWK) \ 850 -v DATAFORM=$(DATAFORM) \ 851 -f checklinks.awk tzdata.zi 852 touch $@ 853 854check_tables: checktab.awk $(YDATA) backward $(ZONETABLES) 855 for tab in $(ZONETABLES); do \ 856 test "$$tab" = zone.tab && links='$(BACKWARD)' || links=''; \ 857 $(AWK) -f checktab.awk -v zone_table=$$tab $(YDATA) $$links \ 858 || exit; \ 859 done 860 touch $@ 861 862check_tzs: $(TZS) $(TZS_NEW) 863 if test -s $(TZS); then \ 864 $(DIFF_TZS) $(TZS) $(TZS_NEW); \ 865 else \ 866 cp $(TZS_NEW) $(TZS); \ 867 fi 868 touch $@ 869 870check_web: $(CHECK_WEB_PAGES) 871check_theory.html: theory.html 872check_tz-art.html: tz-art.html 873check_tz-how-to.html: tz-how-to.html 874check_tz-link.html: tz-link.html 875check_theory.html check_tz-art.html check_tz-how-to.html check_tz-link.html: 876 $(CURL) -sS --url https://validator.w3.org/nu/ -F out=gnu \ 877 -F file=@$$(expr $@ : 'check_\(.*\)') -o $@.out && \ 878 test ! -s $@.out || { cat $@.out; exit 1; } 879 mv $@.out $@ 880 881check_ziguard: rearguard.zi vanguard.zi ziguard.awk 882 $(AWK) -v DATAFORM=rearguard -f ziguard.awk vanguard.zi | \ 883 diff -u rearguard.zi - 884 $(AWK) -v DATAFORM=vanguard -f ziguard.awk rearguard.zi | \ 885 diff -u vanguard.zi - 886 touch $@ 887 888# Check that zishrink.awk does not alter the data, and that ziguard.awk 889# preserves main-format data. 890check_zishrink: check_zishrink_posix check_zishrink_right 891check_zishrink_posix check_zishrink_right: \ 892 zic leapseconds $(PACKRATDATA) $(PACKRATLIST) \ 893 $(TDATA) $(DATAFORM).zi tzdata.zi 894 rm -fr $@.dir $@-t.dir $@-shrunk.dir 895 mkdir $@.dir $@-t.dir $@-shrunk.dir 896 case $@ in \ 897 *_right) leap='-L leapseconds';; \ 898 *) leap=;; \ 899 esac && \ 900 $(ZIC) $$leap -d $@.dir $(DATAFORM).zi && \ 901 $(ZIC) $$leap -d $@-shrunk.dir tzdata.zi && \ 902 case $(DATAFORM),$(PACKRATLIST) in \ 903 main,) \ 904 $(ZIC) $$leap -d $@-t.dir $(TDATA) && \ 905 $(AWK) '/^Rule/' $(TDATA) | \ 906 $(ZIC) $$leap -d $@-t.dir - $(PACKRATDATA) && \ 907 diff -r $@.dir $@-t.dir;; \ 908 esac 909 diff -r $@.dir $@-shrunk.dir 910 rm -fr $@.dir $@-t.dir $@-shrunk.dir 911 touch $@ 912 913clean_misc: 914 rm -fr check_*.dir 915 rm -f *.o *.out $(TIME_T_ALTERNATIVES) \ 916 check_* core typecheck_* \ 917 date tzselect version.h zdump zic libtz.a 918clean: clean_misc 919 rm -fr *.dir tzdb-*/ 920 rm -f *.zi $(TZS_NEW) 921 922maintainer-clean: clean 923 @echo 'This command is intended for maintainers to use; it' 924 @echo 'deletes files that may need special tools to rebuild.' 925 rm -f leapseconds version $(MANTXTS) $(TZS) *.asc *.tar.* 926 927names: 928 @echo $(ENCHILADA) 929 930public: check check_public $(CHECK_TIME_T_ALTERNATIVES) \ 931 tarballs signatures 932 933date.1.txt: date.1 934newctime.3.txt: newctime.3 935newstrftime.3.txt: newstrftime.3 936newtzset.3.txt: newtzset.3 937time2posix.3.txt: time2posix.3 938tzfile.5.txt: tzfile.5 939tzselect.8.txt: tzselect.8 940zdump.8.txt: zdump.8 941zic.8.txt: zic.8 942 943$(MANTXTS): workman.sh 944 LC_ALL=C sh workman.sh `expr $@ : '\(.*\)\.txt$$'` >$@.out 945 mv $@.out $@ 946 947# Set file timestamps deterministically if possible, 948# so that tarballs containing the timestamps are reproducible. 949# 950# '$(SET_TIMESTAMP_N) N DEST A B C ...' sets the timestamp of the 951# file DEST to the maximum of the timestamps of the files A B C ..., 952# plus N if GNU ls and touch are available. 953SET_TIMESTAMP_N = sh -c '\ 954 n=$$0 dest=$$1; shift; \ 955 touch -cmr `ls -t "$$@" | sed 1q` "$$dest" && \ 956 if test $$n != 0 && \ 957 lsout=`ls -n --time-style="+%s" "$$dest" 2>/dev/null`; then \ 958 set x $$lsout && \ 959 touch -cmd @`expr $$7 + $$n` "$$dest"; \ 960 else :; fi' 961# If DEST depends on A B C ... in this Makefile, callers should use 962# $(SET_TIMESTAMP_DEP) DEST A B C ..., for the benefit of any 963# downstream 'make' that considers equal timestamps to be out of date. 964# POSIX allows this 'make' behavior, and HP-UX 'make' does it. 965# If all that matters is that the timestamp be reproducible 966# and plausible, use $(SET_TIMESTAMP). 967SET_TIMESTAMP = $(SET_TIMESTAMP_N) 0 968SET_TIMESTAMP_DEP = $(SET_TIMESTAMP_N) 1 969 970# Set the timestamps to those of the git repository, if available, 971# and if the files have not changed since then. 972# This uses GNU 'ls --time-style=+%s', which outputs the seconds count, 973# and GNU 'touch -d@N FILE', where N is the number of seconds since 1970. 974# If git or GNU is absent, don't bother to sync with git timestamps. 975# Also, set the timestamp of each prebuilt file like 'leapseconds' 976# to be the maximum of the files it depends on. 977set-timestamps.out: $(EIGHT_YARDS) 978 rm -f $@ 979 if (type git) >/dev/null 2>&1 && \ 980 files=`git ls-files $(EIGHT_YARDS)` && \ 981 touch -md @1 test.out; then \ 982 rm -f test.out && \ 983 for file in $$files; do \ 984 if git diff --quiet $$file; then \ 985 time=`git log -1 --format='tformat:%ct' $$file` && \ 986 touch -cmd @$$time $$file; \ 987 else \ 988 echo >&2 "$$file: warning: does not match repository"; \ 989 fi || exit; \ 990 done; \ 991 fi 992 $(SET_TIMESTAMP_DEP) leapseconds $(LEAP_DEPS) 993 for file in `ls $(MANTXTS) | sed 's/\.txt$$//'`; do \ 994 $(SET_TIMESTAMP_DEP) $$file.txt $$file workman.sh || \ 995 exit; \ 996 done 997 $(SET_TIMESTAMP_DEP) version $(VERSION_DEPS) 998 $(SET_TIMESTAMP_DEP) tzdata.zi $(TZDATA_ZI_DEPS) 999 touch $@ 1000set-tzs-timestamp.out: $(TZS) 1001 $(SET_TIMESTAMP_DEP) $(TZS) $(TZS_DEPS) 1002 touch $@ 1003 1004# The zics below ensure that each data file can stand on its own. 1005# We also do an all-files run to catch links to links. 1006 1007check_public: $(VERSION_DEPS) 1008 rm -fr public.dir 1009 mkdir public.dir 1010 ln $(VERSION_DEPS) public.dir 1011 cd public.dir && $(MAKE) CFLAGS='$(GCC_DEBUG_FLAGS)' ALL 1012 for i in $(TDATA_TO_CHECK) public.dir/tzdata.zi \ 1013 public.dir/vanguard.zi public.dir/main.zi \ 1014 public.dir/rearguard.zi; \ 1015 do \ 1016 public.dir/zic -v -d public.dir/zoneinfo $$i 2>&1 || exit; \ 1017 done 1018 public.dir/zic -v -d public.dir/zoneinfo-all $(TDATA_TO_CHECK) 1019 : 1020 : Also check 'backzone' syntax. 1021 rm public.dir/main.zi 1022 cd public.dir && $(MAKE) PACKRATDATA=backzone main.zi 1023 public.dir/zic -d public.dir/zoneinfo main.zi 1024 rm public.dir/main.zi 1025 cd public.dir && \ 1026 $(MAKE) PACKRATDATA=backzone PACKRATLIST=zone.tab main.zi 1027 public.dir/zic -d public.dir/zoneinfo main.zi 1028 : 1029 rm -fr public.dir 1030 touch $@ 1031 1032# Check that the code works under various alternative 1033# implementations of time_t. 1034check_time_t_alternatives: $(TIME_T_ALTERNATIVES) 1035$(TIME_T_ALTERNATIVES_TAIL): $(TIME_T_ALTERNATIVES_HEAD) 1036$(TIME_T_ALTERNATIVES): $(VERSION_DEPS) 1037 rm -fr $@.dir 1038 mkdir $@.dir 1039 ln $(VERSION_DEPS) $@.dir 1040 case $@ in \ 1041 int*32_t) range=-2147483648,2147483648;; \ 1042 u*) range=0,4294967296;; \ 1043 *) range=-4294967296,4294967296;; \ 1044 esac && \ 1045 wd=`pwd` && \ 1046 zones=`$(AWK) '/^[^#]/ { print $$3 }' <zone1970.tab` && \ 1047 if test $@ = $(TIME_T_ALTERNATIVES_HEAD); then \ 1048 range_target=; \ 1049 else \ 1050 range_target=to$$range.tzs; \ 1051 fi && \ 1052 (cd $@.dir && \ 1053 $(MAKE) TOPDIR="$$wd/$@.dir" \ 1054 CFLAGS='$(CFLAGS) -Dtime_tz='"'$@'" \ 1055 REDO='$(REDO)' \ 1056 D=$$wd/$@.dir \ 1057 TZS_YEAR="$$range" TZS_CUTOFF_FLAG="-t $$range" \ 1058 install $$range_target) && \ 1059 test $@ = $(TIME_T_ALTERNATIVES_HEAD) || { \ 1060 (cd $(TIME_T_ALTERNATIVES_HEAD).dir && \ 1061 $(MAKE) TOPDIR="$$wd/$@.dir" \ 1062 TZS_YEAR="$$range" TZS_CUTOFF_FLAG="-t $$range" \ 1063 D=$$wd/$@.dir \ 1064 to$$range.tzs) && \ 1065 $(DIFF_TZS) $(TIME_T_ALTERNATIVES_HEAD).dir/to$$range.tzs \ 1066 $@.dir/to$$range.tzs && \ 1067 if diff -q Makefile Makefile 2>/dev/null; then \ 1068 quiet_option='-q'; \ 1069 else \ 1070 quiet_option=''; \ 1071 fi && \ 1072 diff $$quiet_option -r $(TIME_T_ALTERNATIVES_HEAD).dir/etc \ 1073 $@.dir/etc && \ 1074 diff $$quiet_option -r \ 1075 $(TIME_T_ALTERNATIVES_HEAD).dir/usr/share \ 1076 $@.dir/usr/share; \ 1077 } 1078 touch $@ 1079 1080TRADITIONAL_ASC = \ 1081 tzcode$(VERSION).tar.gz.asc \ 1082 tzdata$(VERSION).tar.gz.asc 1083REARGUARD_ASC = \ 1084 tzdata$(VERSION)-rearguard.tar.gz.asc 1085ALL_ASC = $(TRADITIONAL_ASC) $(REARGUARD_ASC) \ 1086 tzdb-$(VERSION).tar.lz.asc 1087 1088tarballs rearguard_tarballs tailored_tarballs traditional_tarballs \ 1089signatures rearguard_signatures traditional_signatures: \ 1090 version set-timestamps.out rearguard.zi vanguard.zi 1091 VERSION=`cat version` && \ 1092 $(MAKE) AWK='$(AWK)' VERSION="$$VERSION" $@_version 1093 1094# These *_version rules are intended for use if VERSION is set by some 1095# other means. Ordinarily these rules are used only by the above 1096# non-_version rules, which set VERSION on the 'make' command line. 1097tarballs_version: traditional_tarballs_version rearguard_tarballs_version \ 1098 tzdb-$(VERSION).tar.lz 1099rearguard_tarballs_version: \ 1100 tzdata$(VERSION)-rearguard.tar.gz 1101traditional_tarballs_version: \ 1102 tzcode$(VERSION).tar.gz tzdata$(VERSION).tar.gz 1103tailored_tarballs_version: \ 1104 tzdata$(VERSION)-tailored.tar.gz 1105signatures_version: $(ALL_ASC) 1106rearguard_signatures_version: $(REARGUARD_ASC) 1107traditional_signatures_version: $(TRADITIONAL_ASC) 1108 1109tzcode$(VERSION).tar.gz: set-timestamps.out 1110 LC_ALL=C && export LC_ALL && \ 1111 tar $(TARFLAGS) -cf - \ 1112 $(COMMON) $(DOCS) $(SOURCES) | \ 1113 gzip $(GZIPFLAGS) >$@.out 1114 mv $@.out $@ 1115 1116tzdata$(VERSION).tar.gz: set-timestamps.out 1117 LC_ALL=C && export LC_ALL && \ 1118 tar $(TARFLAGS) -cf - $(TZDATA_DIST) | \ 1119 gzip $(GZIPFLAGS) >$@.out 1120 mv $@.out $@ 1121 1122# Create empty files with a reproducible timestamp. 1123CREATE_EMPTY = TZ=UTC0 touch -mt 202010122253.00 1124 1125# The obsolescent *rearguard* targets and related macros are present 1126# for backwards compatibility with tz releases 2018e through 2022a. 1127# They should go away eventually. To build rearguard tarballs you 1128# can instead use 'make DATAFORM=rearguard tailored_tarballs'. 1129tzdata$(VERSION)-rearguard.tar.gz: rearguard.zi set-timestamps.out 1130 rm -fr $@.dir 1131 mkdir $@.dir 1132 ln $(TZDATA_DIST) $@.dir 1133 cd $@.dir && rm -f $(TDATA) $(PACKRATDATA) version 1134 for f in $(TDATA) $(PACKRATDATA); do \ 1135 rearf=$@.dir/$$f; \ 1136 $(AWK) -v DATAFORM=rearguard -f ziguard.awk $$f >$$rearf && \ 1137 $(SET_TIMESTAMP_DEP) $$rearf ziguard.awk $$f || exit; \ 1138 done 1139 sed '1s/$$/-rearguard/' <version >$@.dir/version 1140 : The dummy pacificnew pacifies TZUpdater 2.3.1 and earlier. 1141 $(CREATE_EMPTY) $@.dir/pacificnew 1142 touch -cmr version $@.dir/version 1143 LC_ALL=C && export LC_ALL && \ 1144 (cd $@.dir && \ 1145 tar $(TARFLAGS) -cf - \ 1146 $(TZDATA_DIST) pacificnew | \ 1147 gzip $(GZIPFLAGS)) >$@.out 1148 mv $@.out $@ 1149 1150# Create a tailored tarball suitable for TZUpdater and compatible tools. 1151# For example, 'make DATAFORM=vanguard tailored_tarballs' makes a tarball 1152# useful for testing whether TZUpdater supports vanguard form. 1153# The generated tarball is not byte-for-byte equivalent to a hand-tailored 1154# traditional tarball, as data entries are put into 'etcetera' even if they 1155# came from some other source file. However, the effect should be the same 1156# for ordinary use, which reads all the source files. 1157tzdata$(VERSION)-tailored.tar.gz: set-timestamps.out 1158 rm -fr $@.dir 1159 mkdir $@.dir 1160 : The dummy pacificnew pacifies TZUpdater 2.3.1 and earlier. 1161 cd $@.dir && \ 1162 $(CREATE_EMPTY) $(PRIMARY_YDATA) $(NDATA) backward \ 1163 `test $(DATAFORM) = vanguard || echo pacificnew` 1164 (grep '^#' tzdata.zi && echo && cat $(DATAFORM).zi) \ 1165 >$@.dir/etcetera 1166 touch -cmr tzdata.zi $@.dir/etcetera 1167 sed -n \ 1168 -e '/^# *version *\(.*\)/h' \ 1169 -e '/^# *ddeps */H' \ 1170 -e '$$!d' \ 1171 -e 'g' \ 1172 -e 's/^# *version *//' \ 1173 -e 's/\n# *ddeps */-/' \ 1174 -e 's/ /-/g' \ 1175 -e 'p' \ 1176 <tzdata.zi >$@.dir/version 1177 touch -cmr version $@.dir/version 1178 links= && \ 1179 for file in $(TZDATA_DIST); do \ 1180 test -f $@.dir/$$file || links="$$links $$file"; \ 1181 done && \ 1182 ln $$links $@.dir 1183 LC_ALL=C && export LC_ALL && \ 1184 (cd $@.dir && \ 1185 tar $(TARFLAGS) -cf - * | gzip $(GZIPFLAGS)) >$@.out 1186 mv $@.out $@ 1187 1188tzdb-$(VERSION).tar.lz: set-timestamps.out set-tzs-timestamp.out 1189 rm -fr tzdb-$(VERSION) 1190 mkdir tzdb-$(VERSION) 1191 ln $(ENCHILADA) tzdb-$(VERSION) 1192 $(SET_TIMESTAMP) tzdb-$(VERSION) tzdb-$(VERSION)/* 1193 LC_ALL=C && export LC_ALL && \ 1194 tar $(TARFLAGS) -cf - tzdb-$(VERSION) | lzip -9 >$@.out 1195 mv $@.out $@ 1196 1197tzcode$(VERSION).tar.gz.asc: tzcode$(VERSION).tar.gz 1198tzdata$(VERSION).tar.gz.asc: tzdata$(VERSION).tar.gz 1199tzdata$(VERSION)-rearguard.tar.gz.asc: tzdata$(VERSION)-rearguard.tar.gz 1200tzdb-$(VERSION).tar.lz.asc: tzdb-$(VERSION).tar.lz 1201$(ALL_ASC): 1202 $(GPG) --armor --detach-sign $? 1203 1204TYPECHECK_CFLAGS = $(CFLAGS) -DTYPECHECK -D__time_t_defined -D_TIME_T 1205typecheck: typecheck_long_long typecheck_unsigned 1206typecheck_long_long typecheck_unsigned: $(VERSION_DEPS) 1207 rm -fr $@.dir 1208 mkdir $@.dir 1209 ln $(VERSION_DEPS) $@.dir 1210 cd $@.dir && \ 1211 case $@ in \ 1212 *_long_long) i="long long";; \ 1213 *_unsigned ) i="unsigned" ;; \ 1214 esac && \ 1215 typecheck_cflags='' && \ 1216 $(MAKE) \ 1217 CFLAGS="$(TYPECHECK_CFLAGS) \"-Dtime_t=$$i\"" \ 1218 TOPDIR="`pwd`" \ 1219 install 1220 $@.dir/zdump -i -c 1970,1971 Europe/Rome 1221 touch $@ 1222 1223zonenames: tzdata.zi 1224 @$(AWK) '/^Z/ { print $$2 } /^L/ { print $$3 }' tzdata.zi 1225 1226asctime.o: private.h tzfile.h 1227date.o: private.h 1228difftime.o: private.h 1229localtime.o: private.h tzfile.h 1230strftime.o: private.h tzfile.h 1231zdump.o: version.h 1232zic.o: private.h tzfile.h version.h 1233 1234.PHONY: ALL INSTALL all 1235.PHONY: check check_mild check_time_t_alternatives 1236.PHONY: check_web check_zishrink 1237.PHONY: clean clean_misc dummy.zd force_tzs 1238.PHONY: install install_data maintainer-clean names 1239.PHONY: posix_only posix_right public 1240.PHONY: rearguard_signatures rearguard_signatures_version 1241.PHONY: rearguard_tarballs rearguard_tarballs_version 1242.PHONY: right_only right_posix signatures signatures_version 1243.PHONY: tarballs tarballs_version 1244.PHONY: traditional_signatures traditional_signatures_version 1245.PHONY: traditional_tarballs traditional_tarballs_version 1246.PHONY: tailored_tarballs tailored_tarballs_version 1247.PHONY: typecheck 1248.PHONY: zonenames zones 1249.PHONY: $(ZDS) 1250