Home
last modified time | relevance | path

Searched +full:3 +full:- +full:c45 (Results 1 – 25 of 69) sorted by relevance

123

/freebsd/sys/contrib/device-tree/src/mips/realtek/
H A Dcameo-rtl9302c-2x-rtl8224-2xge.dts1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /dts-v1/;
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/leds/common.h>
9 #include <dt-bindings/thermal/thermal.h>
12 compatible = "cameo,rtl9302c-2x-rtl8224-2xge", "realtek,rtl9302-soc";
21 stdout-path = "serial0:115200n8";
32 compatible = "jedec,spi-nor";
34 spi-max-frequency = <10000000>;
[all …]
/freebsd/sys/contrib/device-tree/src/arm64/freescale/
H A Dfsl-lx2160a-bluebox3.dts1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
5 // Copyright 2020-2021 NXP
7 /dts-v1/;
9 #include "fsl-lx2160a.dtsi"
13 compatible = "fsl,lx2160a-bluebox3", "fsl,lx2160a";
23 stdout-path = "serial0:115200n8";
26 sb_3v3: regulator-sb3v3 {
27 compatible = "regulator-fixed";
28 regulator-name = "MC34717-3.3VSB";
29 regulator-min-microvolt = <3300000>;
[all …]
H A Dfsl-ls1028a-qds-13bb.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 * Copyright 2019-2021 NXP
8 * Requires a SCH-30841 card with lane A of connector rewired to PHY lane C.
9 * Set-up is a SCH-30842 card in slot 1 and SCH-30841 in slot 2.
12 /dts-v1/;
16 #address-cells = <1>;
17 #size-cells = <0>;
19 slot1_sgmii: ethernet-phy@2 {
22 compatible = "ethernet-phy-ieee802.3-c45";
27 phy-handle = <&slot1_sgmii>;
[all …]
H A Dfsl-ls1028a-qds-13bb.dtso1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 * Copyright 2019-2021 NXP
8 * Requires a SCH-30841 card with lane A of connector rewired to PHY lane C.
9 * Set-up is a SCH-30842 card in slot 1 and SCH-30841 in slot 2.
12 /dts-v1/;
16 #address-cells = <1>;
17 #size-cells = <0>;
19 slot1_sgmii: ethernet-phy@2 {
22 compatible = "ethernet-phy-ieee802.3-c45";
27 phy-handle = <&slot1_sgmii>;
[all …]
H A Dfsl-lx2162a-clearfog.dts1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
5 // Copyright 2023 Josua Mayer <josua@solid-run.com>
7 /dts-v1/;
9 #include "fsl-lx2160a.dtsi"
10 #include "fsl-lx2162a-sr-som.dtsi"
14 compatible = "solidrun,lx2162a-clearfog", "solidrun,lx2162a-som", "fsl,lx2160a";
35 stdout-path = "serial0:115200n8";
39 compatible = "gpio-leds";
41 led_sfp_at: led-sfp-at {
43 default-state = "off";
[all …]
H A Dfsl-ls1028a-qds-7777.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 * Copyright 2019-2021 NXP
8 * Requires a SCH-30841 card without lane A/C rewire and with a FW with muxing
12 /dts-v1/;
16 #address-cells = <1>;
17 #size-cells = <0>;
20 slot1_sxgmii0: ethernet-phy@0 {
22 compatible = "ethernet-phy-ieee802.3-c45";
25 slot1_sxgmii1: ethernet-phy@1 {
27 compatible = "ethernet-phy-ieee802.3-c45";
[all …]
H A Dfsl-ls1028a-qds-7777.dtso1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 * Copyright 2019-2021 NXP
8 * Requires a SCH-30841 card without lane A/C rewire and with a FW with muxing
12 /dts-v1/;
16 #address-cells = <1>;
17 #size-cells = <0>;
20 slot1_sxgmii0: ethernet-phy@0 {
22 compatible = "ethernet-phy-ieee802.3-c45";
25 slot1_sxgmii1: ethernet-phy@1 {
27 compatible = "ethernet-phy-ieee802.3-c45";
[all …]
H A Dfsl-ls2080a-rdb.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
13 /dts-v1/;
15 #include "fsl-ls2080a.dtsi"
16 #include "fsl-ls208xa-rdb.dtsi"
17 #include <dt-bindings/interrupt-controller/arm-gic.h>
21 compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
24 stdout-path = "serial1:115200n8";
29 phy-handle = <&mdio2_phy1>;
30 phy-connection-type = "10gbase-r";
34 phy-handle = <&mdio2_phy2>;
[all …]
H A Dfsl-ls2088a-rdb.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
12 /dts-v1/;
14 #include "fsl-ls2088a.dtsi"
15 #include "fsl-ls208xa-rdb.dtsi"
19 compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
22 stdout-path = "serial1:115200n8";
27 phy-handle = <&mdio1_phy1>;
28 phy-connection-type = "10gbase-r";
32 phy-handle = <&mdio1_phy2>;
33 phy-connection-type = "10gbase-r";
[all …]
/freebsd/sys/contrib/device-tree/Bindings/net/
H A Dbroadcom-bcm87xx.txt5 "ethernet-phy-ieee802.3-c45"
9 - broadcom,c45-reg-init : one of more sets of 4 cells. The first cell
18 ethernet-phy@5 {
20 compatible = "broadcom,bcm8706", "ethernet-phy-ieee802.3-c45";
21 interrupt-parent = <&gpio>;
28 broadcom,c45-reg-init = <1 0xc808 0xff8f 0x70>;
H A Drealtek,rtl9301-mdio.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/net/realtek,rtl9301-mdio.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Chris Packham <chris.packham@alliedtelesis.co.nz>
15 - items:
16 - enum:
17 - realtek,rtl9302b-mdio
18 - realtek,rtl9302c-mdio
19 - realtek,rtl9303-mdio
[all …]
H A Dmdio-mux-mmioreg.txt1 Properties for an MDIO bus multiplexer controlled by a memory-mapped device
3 This is a special case of a MDIO bus multiplexer. A memory-mapped device,
4 like an FPGA, is used to control which child bus is connected. The mdio-mux
5 node must be a child of the memory-mapped device. The driver currently only
6 supports devices with 8, 16 or 32-bit registers.
10 - compatible : string, must contain "mdio-mux-mmioreg"
12 - reg : integer, contains the offset of the register that controls the bus
16 - mux-mask : integer, contains an eight-bit mask that specifies which
18 'reg' property of each child mdio-mux node must be constrained by
23 The FPGA node defines a memory-mapped FPGA with a register space of 0x30 bytes.
[all …]
H A Dmdio-mux-mmioreg.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/net/mdio-mux-mmioreg.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Properties for an MDIO bus multiplexer controlled by a memory-mapped device
10 - Andrew Lunn <andrew@lunn.ch>
13 This is a special case of a MDIO bus multiplexer. A memory-mapped device,
14 like an FPGA, is used to control which child bus is connected. The mdio-mux
15 node must be a child of the memory-mapped device. The driver currently only
16 supports devices with 8, 16 or 32-bit registers.
[all …]
H A Dmarvell,aquantia.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Christian Marangi <ansuelsmth@gmail.com>
16 This can be done and is implemented by OEM in 3 different way:
17 - Attached SPI flash directly to the PHY with the firmware. The PHY
19 - Read from a dedicated partition on system NAND declared in an
21 - Manually provided firmware loaded from a file in the filesystem.
24 - $ref: ethernet-phy.yaml#
31 - ethernet-phy-id03a1.b445
[all …]
H A Daeonsemi,as21xxx.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Christian Marangi <ansuelsmth@gmail.com>
17 0x7500 0x7500 or 0x7500 0x9410 on C45 registers.
20 - Attached SPI flash directly to the PHY with the firmware. The PHY
22 - Manually provided firmware loaded from a file in the filesystem.
39 - $ref: ethernet-phy.yaml#
46 - ethernet-phy-id7500.9410
47 - ethernet-phy-id7500.9402
[all …]
H A Dethernet-phy.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Andrew Lunn <andrew@lunn.ch>
11 - Florian Fainelli <f.fainelli@gmail.com>
12 - Heiner Kallweit <hkallweit1@gmail.com>
14 # The dt-schema tools will generate a select statement first by using
21 pattern: "^ethernet-phy(@[a-f0-9]+)?$"
24 - $nodename
[all …]
/freebsd/sys/contrib/device-tree/src/arm64/renesas/
H A Dr8a779a0-falcon-ethernet.dtsi1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree Source for the Falcon Ethernet sub-board
19 pinctrl-0 = <&avb1_pins>;
20 pinctrl-names = "default";
21 phy-handle = <&avb1_phy>;
25 #address-cells = <1>;
26 #size-cells = <0>;
28 reset-gpios = <&gpio5 15 GPIO_ACTIVE_LOW>;
29 reset-post-delay-us = <4000>;
31 avb1_phy: ethernet-phy@7 {
[all …]
H A Dr8a779f0-spider-ethernet.dtsi1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree Source for the Spider Ethernet sub-board
23 label = "ethernet-sub-board";
33 power-source = <1800>;
39 power-source = <1800>;
45 power-source = <1800>;
50 pinctrl-0 = <&tsn0_pins>, <&tsn1_pins>, <&tsn2_pins>;
51 pinctrl-names = "default";
57 phy-handle = <&u101>;
58 phy-mode = "sgmii";
[all …]
H A Dwhite-hawk-ethernet.dtsi1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 * Device Tree Source for the White Hawk RAVB/Ethernet(1000Base-T1)
4 * sub-board
17 pinctrl-0 = <&avb1_pins>;
18 pinctrl-names = "default";
19 phy-handle = <&avb1_phy>;
23 #address-cells = <1>;
24 #size-cells = <0>;
26 reset-gpios = <&gpio6 1 GPIO_ACTIVE_LOW>;
27 reset-post-delay-us = <4000>;
[all …]
/freebsd/sys/contrib/device-tree/src/powerpc/fsl/
H A Dt4240qds.dts4 * Copyright 2012 - 2015 Freescale Semiconductor Inc.
35 /include/ "t4240si-pre.dtsi"
40 #address-cells = <2>;
41 #size-cells = <2>;
42 interrupt-parent = <&mpic>;
86 3 0 0xf 0xffdf0000 0x00008000>;
89 #address-cells = <1>;
90 #size-cells = <1>;
91 compatible = "cfi-flash";
94 bank-widt
[all...]
H A Db4860qds.dts4 * Copyright 2012 - 2015 Freescale Semiconductor Inc.
35 /include/ "b4860si-pre.dtsi"
50 board-control@3,0 {
51 compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis";
58 phy-handle = <&phy_sgmii_1e>;
59 phy-connection-type = "sgmii";
63 phy-handle = <&phy_sgmii_1f>;
64 phy-connection-type = "sgmii";
68 phy-handle = <&phy_xaui_slot1>;
69 phy-connection-type = "xgmii";
[all …]
H A Dt2080rdb.dts2 * T2080PCIe-RDB Board Device Tree Source
4 * Copyright 2014 - 2015 Freescale Semiconductor Inc.
35 /include/ "t208xsi-pre.dtsi"
41 #address-cells = <2>;
42 #size-cells = <2>;
43 interrupt-parent = <&mpic>;
60 phy-handle = <&xg_aq1202_phy3>;
61 phy-connection-type = "xgmii";
65 phy-handle = <&xg_aq1202_phy4>;
66 phy-connection-type = "xgmii";
[all …]
/freebsd/sys/contrib/device-tree/src/arm64/marvell/
H A Darmada-8040-mcbin.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 #include "armada-8040-mcbin.dtsi"
11 model = "Marvell 8040 MACCHIATOBin Double-shot";
12 compatible = "marvell,armada8040-mcbin-doubleshot",
13 "marvell,armada8040-mcbin", "marvell,armada8040",
14 "marvell,armada-ap806-quad", "marvell,armada-ap806";
20 phy0: ethernet-phy@0 {
21 compatible = "ethernet-phy-ieee802.3-c45";
26 phy8: ethernet-phy@8 {
27 compatible = "ethernet-phy-ieee802.3-c45";
[all …]
/freebsd/lib/libmp/tests/
H A Dlegacy_test.c1 /*-
34 *c42,*c43, *c44, *c45, *t0, *t1; variable
42 printf("ok %d - %s\n", ++tnr, tname); in testmcmp()
44 printf("not ok - %d %s\n", ++tnr, tname); in testmcmp()
69 printf("ok %d - %s\n", ++tnr, "mtox0"); in testsimpel()
71 printf("not ok %d - %s\n", ++tnr, "mtox0"); in testsimpel()
140 mp_rpow(c2, 3, t0); in testpow()
145 * This program performs some very basic tests of libmp(3). It is by
157 * Init "constants" variables - done in this somewhat in main()
164 c3 = mp_itom(3); in main()
[all …]
/freebsd/contrib/arm-optimized-routines/math/aarch64/advsimd/
H A Dlog2f.c2 * Single-precision vector log2 function.
4 * Copyright (c) 2022-2024, Arm Limited.
5 * SPDX-License-Identifier: MIT OR Apache-2.0 WITH LLVM-exception
21 log2(1+r)/r for r in [ -1/3, 1/3 ].
22 rel error: 0x1.c4c4b0cp-26. */
24 .c1 = -0x1.715458p-1f,
25 .c2 = V4 (0x1.ec701cp-2f),
26 .c3 = -0x1.7171a4p-2f,
27 .c4 = V4 (0x1.27a0b8p-2f),
28 .c5 = -0x1.e5143ep-3f,
[all …]

123