xref: /freebsd/sys/contrib/device-tree/src/arm/microchip/at91sam9x5dm.dtsi (revision f126890ac5386406dadf7c4cfa9566cbb56537c5)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * at91sam9x5dm.dtsi - Device Tree file for SAM9x5 display module
4 *
5 *  Copyright (C) 2014 Atmel,
6 *                2014 Free Electrons
7 *
8 *  Author: Boris Brezillon <boris.brezillon@free-electrons.com>
9 */
10
11/ {
12	backlight: backlight {
13		compatible = "pwm-backlight";
14		pwms = <&hlcdc_pwm 0 50000 0>;
15		brightness-levels = <0 4 8 16 32 64 128 255>;
16		default-brightness-level = <6>;
17		power-supply = <&bl_reg>;
18		status = "disabled";
19	};
20
21	bl_reg: backlight_regulator {
22		compatible = "regulator-fixed";
23		regulator-name = "backlight-power-supply";
24		regulator-min-microvolt = <5000000>;
25		regulator-max-microvolt = <5000000>;
26		status = "disabled";
27	};
28
29	panel: panel {
30		compatible = "foxlink,fl500wvr00-a0t";
31		backlight = <&backlight>;
32		power-supply = <&panel_reg>;
33		#address-cells = <1>;
34		#size-cells = <0>;
35		status = "disabled";
36
37		port@0 {
38			#address-cells = <1>;
39			#size-cells = <0>;
40
41			panel_input: endpoint@0 {
42				reg = <0>;
43				remote-endpoint = <&hlcdc_panel_output>;
44			};
45		};
46	};
47
48	panel_reg: panel_regulator {
49		compatible = "regulator-fixed";
50		regulator-name = "panel-power-supply";
51		regulator-min-microvolt = <3300000>;
52		regulator-max-microvolt = <3300000>;
53		status = "disabled";
54	};
55};
56
57&adc0 {
58	atmel,adc-ts-wires = <4>;
59	atmel,adc-ts-pressure-threshold = <10000>;
60	status = "okay";
61};
62
63&i2c0 {
64	keyboard@1b {
65		compatible = "qt1070";
66		reg = <0x1b>;
67		interrupt-parent = <&pioA>;
68		interrupts = <7 0x0>;
69		pinctrl-names = "default";
70		pinctrl-0 = <&pinctrl_qt1070_irq>;
71		wakeup-source;
72	};
73};
74
75&hlcdc {
76	hlcdc-display-controller {
77		pinctrl-names = "default";
78		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
79
80		port@0 {
81			hlcdc_panel_output: endpoint@0 {
82				reg = <0>;
83				remote-endpoint = <&panel_input>;
84			};
85		};
86	};
87};
88
89&pinctrl {
90	board {
91		pinctrl_qt1070_irq: qt1070_irq {
92			atmel,pins =
93				<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
94		};
95	};
96};
97