Home
last modified time | relevance | path

Searched +full:ext +full:- +full:active +full:- +full:high (Results 1 – 25 of 280) sorted by relevance

12345678910>>...12

/linux/Documentation/devicetree/bindings/watchdog/
H A Daspeed,ast2400-wdt.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/watchdog/aspeed,ast2400-wdt.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Andrew Jeffery <andrew@codeconstruct.com.au>
15 - aspeed,ast2400-wdt
16 - aspeed,ast2500-wdt
17 - aspeed,ast2600-wdt
29 aspeed,reset-type:
32 - cpu
[all …]
/linux/Documentation/devicetree/bindings/rtc/
H A Drtc-omap.txt4 - compatible:
5 - "ti,da830-rtc" - for RTC IP used similar to that on DA8xx SoC family.
6 - "ti,am3352-rtc" - for RTC IP used similar to that on AM335x SoC family.
7 This RTC IP has special WAKE-EN Register to enable
11 - "ti,am4372-rtc" - for RTC IP used similar to that on AM437X SoC family.
12 - reg: Address range of rtc register set
13 - interrupts: rtc timer, alarm interrupts in order
16 - system-power-controller: whether the rtc is controlling the system power
18 - clocks: Any internal or external clocks feeding in to rtc
19 - clock-names: Corresponding names of the clocks
[all …]
/linux/arch/arm64/boot/dts/freescale/
H A Dimx8dxl-evk.dts1 // SPDX-License-Identifier: GPL-2.0+
6 /dts-v1/;
12 compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl";
24 stdout-path = &lpuart0;
27 imx8dxl-cm4 {
28 compatible = "fsl,imx8qxp-cm4";
30 mbox-names = "tx", "rx", "rxdb";
32 memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
34 power-domains = <&pd IMX_SC_R_M4_0_PID0>, <&pd IMX_SC_R_M4_0_MU_1A>;
35 fsl,resource-id = <IMX_SC_R_M4_0_PID0>;
[all …]
H A Dimx8mm-nitrogen-r2.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
11 compatible = "boundary,imx8mm-nitrogen8mm", "fsl,imx8mm";
13 reg_vref_1v8: regulator-vref-1v8 {
14 compatible = "regulator-fixed";
15 regulator-name = "vref-1v8";
16 regulator-min-microvolt = <1800000>;
17 regulator-max-microvolt = <1800000>;
20 reg_vref_3v3: regulator-vref-3v3 {
21 compatible = "regulator-fixed";
[all …]
H A Dimx95-19x19-evk.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/pwm/pwm.h>
14 #define BRD_SM_CTRL_SD3_WAKE 0x8000 /* PCAL6408A-0 */
15 #define BRD_SM_CTRL_PCIE1_WAKE 0x8001 /* PCAL6408A-4 */
16 #define BRD_SM_CTRL_BT_WAKE 0x8002 /* PCAL6408A-5 */
17 #define BRD_SM_CTRL_PCIE2_WAKE 0x8003 /* PCAL6408A-6 */
18 #define BRD_SM_CTRL_BUTTON 0x8004 /* PCAL6408A-7 */
22 compatible = "fsl,imx95-19x19-evk", "fsl,imx95";
43 bt_sco_codec: audio-codec-bt-sco {
[all …]
H A Dimx8qm-mek.dts1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright 2018-2019 NXP
7 /dts-v1/;
9 #include <dt-bindings/usb/pd.h>
14 compatible = "fsl,imx8qm-mek", "fsl,imx8qm";
17 stdout-path = &lpuart0;
21 /delete-node/ cpu-map;
22 /delete-node/ cpu@100;
23 /delete-node/ cpu@101;
26 thermal-zones {
[all …]
/linux/Documentation/netlink/specs/
H A Dethtool.yaml1 # SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
5 protocol: genetlink-legacy
10 -
11 name: udp-tunnel-type
12 enum-name:
14 entries: [ vxlan, geneve, vxlan-gpe ]
15 -
19 -
20 name: header-flags
22 entries: [ compact-bitsets, omit-reply, stats ]
[all …]
/linux/drivers/regulator/
H A Dab8500-ext.c1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) ST-Ericsson SA 2010
11 * ab8500-ext supports the following regulators:
12 * - VextSupply3
35 bool hwreq; /* requires hw mode or high power mode */
41 REGULATOR_SUPPLY("vinvsim", "sim-detect.0"),
51 .name = "ab8500-ext-supply1",
62 .name = "ab8500-ext-supply2",
70 .name = "ab8500-ext-supply3",
83 * struct ab8500_ext_regulator_info - ab8500 regulator information
[all …]
/linux/arch/arm/boot/dts/nxp/imx/
H A Dimx6sx-sdb.dtsi1 // SPDX-License-Identifier: GPL-2.0
5 /dts-v1/;
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/input/input.h>
13 compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
16 stdout-path = &uart1;
24 backlight_display: backlight-display {
25 compatible = "pwm-backlight";
27 brightness-levels = <0 4 8 16 32 64 128 255>;
28 default-brightness-level = <6>;
[all …]
H A Dimx6ul-14x14-evk.dtsi1 // SPDX-License-Identifier: GPL-2.0
5 #include <dt-bindings/media/video-interfaces.h>
9 stdout-path = &uart1;
17 backlight_display: backlight-display {
18 compatible = "pwm-backlight";
20 brightness-levels = <0 4 8 16 32 64 128 255>;
21 default-brightness-level = <6>;
26 reg_sd1_vmmc: regulator-sd1-vmmc {
27 compatible = "regulator-fixed";
28 regulator-name = "VSD_3V3";
[all …]
H A Dimx7d-sdb.dts1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
5 /dts-v1/;
11 compatible = "fsl,imx7d-sdb", "fsl,imx7d";
19 stdout-path = &uart1;
27 gpio-keys {
28 compatible = "gpio-keys";
29 pinctrl-names = "default";
30 pinctrl-0 = <&pinctrl_gpio_keys>;
32 key-volume-up {
36 wakeup-source;
[all …]
H A Dimx6dl-b1x5pv2.dtsi1 // SPDX-License-Identifier: GPL-2.0 OR MIT
6 // Copyright 2018-2021 General Electric Company
7 // Copyright 2018-2021 Collabora
9 #include <dt-bindings/input/input.h>
10 #include "imx6dl-qmx6.dtsi"
14 stdout-path = &uart3;
20 operating-points = <
25 fsl,soc-operating-points = <
26 /* ARM kHz SOC-PU uV */
33 operating-points = <
[all …]
H A Dimx6sl-evk.dts1 // SPDX-License-Identifier: GPL-2.0
5 /dts-v1/;
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/input/input.h>
13 compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
16 stdout-path = &uart1;
25 compatible = "pwm-backlight";
27 brightness-levels = <0 4 8 16 32 64 128 255>;
28 default-brightness-level = <6>;
32 compatible = "gpio-leds";
[all …]
H A Dimx7d-smegw01.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
13 compatible = "storopack,imx7d-smegw01", "fsl,imx7d";
26 stdout-path = &uart1;
34 reg_lte_on: regulator-lte-on {
35 compatible = "regulator-fixed";
36 pinctrl-names = "default";
37 pinctrl-0 = <&pinctrl_lte_on>;
38 regulator-min-microvolt = <3300000>;
[all …]
/linux/arch/arm/boot/dts/nvidia/
H A Dtegra30-asus-nexus7-grouper-ti-pmic.dtsi1 // SPDX-License-Identifier: GPL-2.0
3 #include <dt-bindings/interrupt-controller/arm-gic.h>
4 #include <dt-bindings/gpio/gpio.h>
13 #interrupt-cells = <2>;
14 interrupt-controller;
15 wakeup-source;
17 ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
18 ti,system-power-controller;
19 ti,sleep-keep-ck32k;
20 ti,sleep-enable;
[all …]
H A Dtegra124-nyan.dtsi1 // SPDX-License-Identifier: GPL-2.0
2 #include <dt-bindings/input/input.h>
3 #include <dt-bindings/thermal/thermal.h>
14 stdout-path = "serial0:115200n8";
20 * missing a unit-address. However, the bootloader on these Chromebook
22 * Adding the unit-address causes the bootloader to create a /memory
34 /delete-node/ memory@80000000;
40 vdd-supply = <&vdd_3v3_hdmi>;
41 pll-supply = <&vdd_hdmi_pll>;
42 hdmi-supply = <&vdd_5v0_hdmi>;
[all …]
H A Dtegra124-venice2.dts1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
4 #include <dt-bindings/input/input.h>
18 stdout-path = "serial0:115200n8";
29 vdd-supply = <&vdd_3v3_hdmi>;
30 pll-supply = <&vdd_hdmi_pll>;
31 hdmi-supply = <&vdd_5v0_hdmi>;
33 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
34 nvidia,hpd-gpio =
41 avdd-io-hdmi-dp-supply = <&vdd_1v05_run>;
[all …]
/linux/drivers/media/dvb-frontends/
H A Dsp2.c1 // SPDX-License-Identifier: GPL-2.0-or-later
8 * DVB-S2 CI card (cimax2) with following copyrights:
20 struct i2c_client *client = s->client; in sp2_read_i2c()
21 struct i2c_adapter *adap = client->adapter; in sp2_read_i2c()
24 .addr = client->addr, in sp2_read_i2c()
29 .addr = client->addr, in sp2_read_i2c()
39 dev_err(&client->dev, "i2c read error, reg = 0x%02x, status = %d\n", in sp2_read_i2c()
44 return -EIO; in sp2_read_i2c()
47 dev_dbg(&s->client->dev, "addr=0x%04x, reg = 0x%02x, data = %02x\n", in sp2_read_i2c()
48 client->addr, reg, buf[0]); in sp2_read_i2c()
[all …]
/linux/Documentation/sound/designs/
H A Dmidi-2.0.rst12 - Support of Universal MIDI Packet (UMP)
13 - Support of MIDI 2.0 protocol messages
14 - Transparent conversions between UMP and legacy MIDI 1.0 byte stream
15 - MIDI-CI for property and profile configurations
26 MIDI-CI is a high-level protocol that can talk with the MIDI device
31 the encoding/decoding of MIDI protocols on UMP, while MIDI-CI is
32 supported in user-space over the standard SysEx.
65 When a device supports MIDI 2.0, the USB-audio driver probes and uses
69 `midi2_enable=0` option to snd-usb-audio driver module, too.
78 option to snd-usb-audio driver for skipping the UMP v1.1 inquiries.
[all …]
/linux/arch/arm64/boot/dts/qcom/
H A Dmsm8916-motorola-osprey.dts1 // SPDX-License-Identifier: GPL-2.0-only
3 /dts-v1/;
5 #include "msm8916-motorola-common.dtsi"
10 chassis-type = "handset";
12 reg_touch_vdda: regulator-touch-vdda {
13 compatible = "regulator-fixed";
14 regulator-name = "touch_vdda";
16 enable-active-high;
17 pinctrl-0 = <&touch_vdda_default>;
18 pinctrl-names = "default";
[all …]
/linux/drivers/net/ethernet/intel/igc/
H A Digc_regs.h1 /* SPDX-License-Identifier: GPL-2.0 */
8 #define IGC_CTRL 0x00000 /* Device Control - RW */
9 #define IGC_STATUS 0x00008 /* Device Status - RO */
10 #define IGC_EECD 0x00010 /* EEPROM/Flash Control - RW */
11 #define IGC_CTRL_EXT 0x00018 /* Extended Device Control - RW */
12 #define IGC_MDIC 0x00020 /* MDI Control - RW */
13 #define IGC_CONNSW 0x00034 /* Copper/Fiber switch control - RW */
14 #define IGC_VET 0x00038 /* VLAN Ether Type - RW */
15 #define IGC_LEDCTL 0x00E00 /* LED Control - RW */
20 #define IGC_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */
[all …]
/linux/drivers/media/pci/cx23885/
H A Dcimax2.c1 // SPDX-License-Identifier: GPL-2.0-or-later
5 * CIMax2(R) SP2 driver in conjunction with NetUp Dual DVB-S2 CI card
20 bits 31-16
21 +-----------+
23 +-----------+
25 +-------+-------+-------+-------+-------+-------+-------+-------+
27 +-------+-------+-------+-------+-------+-------+-------+-------+
29 +-------+-------+-------+-------+-------+-------+-------+-------+
31 +-------+-------+-------+-------+-------+-------+-------+-------+
106 return -1; in netup_read_i2c()
[all …]
/linux/drivers/watchdog/
H A Daspeed_wdt.c1 // SPDX-License-Identifier: GPL-2.0-or-later
57 { .compatible = "aspeed,ast2400-wdt", .data = &ast2400_config },
58 { .compatible = "aspeed,ast2500-wdt", .data = &ast2500_config },
59 { .compatible = "aspeed,ast2600-wdt", .data = &ast2600_config },
90 * * Drive mode: push-pull vs open-drain
91 * * Polarity: Active high or active low
102 * regular fashion. For read purposes, bit 31 represents active high or low,
103 * and bit 30 represents push-pull or open-drain. With respect to write, magic
131 wdt->ctrl |= WDT_CTRL_ENABLE; in aspeed_wdt_enable()
133 writel(0, wdt->base + WDT_CTRL); in aspeed_wdt_enable()
[all …]
/linux/arch/arm/boot/dts/marvell/
H A Dkirkwood-netxbig.dtsi1 // SPDX-License-Identifier: GPL-2.0
9 * Based on netxbig_v2-setup.c,
14 #include <dt-bindings/leds/leds-netxbig.h>
16 #include "kirkwood-6281.dtsi"
21 stdout-path = &uart0;
33 #address-cells = <1>;
34 #size-cells = <1>;
35 compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
37 spi-max-frequency = <20000000>;
42 label = "u-boot";
[all …]
/linux/drivers/net/ethernet/intel/igb/
H A De1000_regs.h1 /* SPDX-License-Identifier: GPL-2.0 */
2 /* Copyright(c) 2007 - 2018 Intel Corporation. */
7 #define E1000_CTRL 0x00000 /* Device Control - RW */
8 #define E1000_STATUS 0x00008 /* Device Status - RO */
9 #define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
10 #define E1000_EERD 0x00014 /* EEPROM Read - RW */
11 #define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
12 #define E1000_MDIC 0x00020 /* MDI Control - RW */
13 #define E1000_MDICNFG 0x00E04 /* MDI Config - RW */
14 #define E1000_SCTL 0x00024 /* SerDes Control - RW */
[all …]

12345678910>>...12