Changes in Makefile

c10cfc952215644956284a42fa7b7860dfbcb5f5 - arm64: dts: imx{91,93}-phyboard-segin: Add peb-av-18 overlays

Wed, 03 Jun 2026 08:15:01 +0200

arm64: dts: imx{91,93}-phyboard-segin: Add peb-av-18 overlaysAdd overlay for the PHYTEC Audio/Video adapter module PEB-AV-18 onphyBOARD-Segin-i.MX91/93 boards. The supported AC220 display isPowertip PH800480T032-ZHC19 panel with a backlight and Ilitektouch-screen controller.Signed-off-by: Florijan Plohl Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

41b45d26d207a15886806fa300eded53fe303abe - arm64: dts: imx943-evk-sdwifi: add a new dtso to support SDIW612 WiFi

Tue, 19 May 2026 07:39:42 +0200

arm64: dts: imx943-evk-sdwifi: add a new dtso to support SDIW612 WiFiAdd a new imx943-evk-sdwifi.dtso to support SDIW612 WiFi chip onimx943-evk board, the default imx943-evk.dtb is used to support PCIEAW693 WiFi.Use separate dts for SDIW612 and PCIe AW693 WiFi to avoid the sharedregulator between SDIO and PCIe buses, the random probe order betweenthe two buses may break the PCIe initialization sequence which causeAW693 has probability of failing to detect.Signed-off-by: Sherry Sun Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

3f519121e120a5264fb5638afd6a2aab44db11a3 - arm64: dts: freescale: imx95-aquila: Add Clover carrier board

Thu, 21 May 2026 19:11:06 +0200

arm64: dts: freescale: imx95-aquila: Add Clover carrier boardAdd support for the Aquila i.MX95 SoM mated with the Clover carrierboard. Clover is a low-cost carrier board for the Aquila familyfeaturing a small form factor (Nano-ITX 120mm x 120mm) and built forvolume production.Link: https://www.toradex.com/computer-on-modules/aquila-arm-family/nxp-imx95Link: https://www.toradex.com/products/carrier-board/cloverSigned-off-by: Antoine Gouby Signed-off-by: Franz Schnyder Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

d5c082ba23db712b1f3f28bee7de34d6b9a05d91 - arm64: dts: freescale: add Aquila iMX95 support

Thu, 21 May 2026 19:11:05 +0200

arm64: dts: freescale: add Aquila iMX95 supportAdd support for the Toradex Aquila iMX95 and its development carrierboard.The module consists of an NXP i.MX95 family SoC, up to 16GB LPDDR5 RAM,up to 128GB of storage, a USB 3.2 OTG and USB 2.0 Host, a GigabitEthernet PHY, a 10 Gigabit Ethernet interface, an I2C EEPROM andTemperature Sensor, an RX8130 RTC, one Quad lane CSI interface, one Quadlane DSI or CSI interface, one LVDS interface (one or two channels), andsome optional addons: DisplayPort (through a DSI-DP bridge), TPM 2.0,and a WiFi/BT module.Link: https://www.toradex.com/computer-on-modules/aquila-arm-family/nxp-imx95Link: https://www.toradex.com/products/carrier-board/aquila-development-board-kitSigned-off-by: João Paulo Gonçalves Co-developed-by: Emanuele Ghidoli Signed-off-by: Emanuele Ghidoli Co-developed-by: Francesco Dolcini Signed-off-by: Francesco Dolcini Co-developed-by: Antoine Gouby Signed-off-by: Antoine Gouby Co-developed-by: Ernest Van Hoecke Signed-off-by: Ernest Van Hoecke Co-developed-by: Franz Schnyder Signed-off-by: Franz Schnyder Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

815fe2e0e65b42569f8c68dfa256c89db72e0b18 - arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts

Tue, 02 Jun 2026 05:45:16 +0200

arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dtsNXP i.MX95 19x19 FRDM PRO is cost-effective with extensiveexpansion capabilities based on the i.MX95 19x19 SoC.It is designed for AI and robotic situation.Difference with i.MX95 15x15 FRDM:- Use i.MX95 19x19 package- Support 2 KEY-M M.2 PCIE- 10G ETH interface- Secure Element interfaceAdd device tree for this board. Including:- LPUART1 and LPUART5- NETC- USB- 2 M-Key M.2 PCIe- uSDHC1, uSDHC2 and uSDHC3- FlexCAN1 and FlexCAN3 (CAN1 is reserved by M7)- LPI2C3, LPI2C4 and their child nodes- Watchdog3- SAI, MQS, MICFILSigned-off-by: Joseph Guo Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

ef873f01a1b18820734b00bffa00d878de0e0bb0 - arm64: dts: imx8dxl: Add SolidRun SoM and HummingBoard

Sun, 24 May 2026 14:03:10 +0200

arm64: dts: imx8dxl: Add SolidRun SoM and HummingBoardAdd support for the SolidRun i.MX8DXL System-on-Module (revision 2.1)and its corresponding evaluation carrier board, the HummingBoardTelematics (revision 2.0).The SoM features:- eMMC- GNSS with 1PPS- V2X DSRC Radio- Secure Element for V2X Applications- Inertial Sensor- Pressure Sensor- CompassThe HummingBoard Telematics carrier board features:- Cellular Modem- WiFi & Bluetooth- RTC with backup battery- CAN- 100Base-TX Ethernet- 100Base-T1 Ethernet- Multi-interface I/O connector- Multi-interface add-on board connectorThe multi-interface I/O connector supplies power and provides basic I/O(Console UART, 100Base-TX, 100Base-T1, CAN, and power-supply logic levelGPIOs). The SolidRun Evaluation Kit includes a suitable cable andadapter board that breaks these out into RJ45, USB Type-A, microUSBConsole, and Terminal Block connectors.The multi-interface add-on board connector provides additionalinterfaces (5x 100Base-T1, 2x SGMII, USB 2.0 shared with the cellularmodem, CAN, MDIO, SPI, UART, PCIe, I2C, and GPIO). These add-oninterfaces are disabled by default in the base device tree and areintended to be enabled and extended via device tree overlays.Note that a few components physically present on the SoM were omittedfrom this description due to a lack of upstream bindings and drivers:- Pressure Sensor- V2X DSRC Radio- Secure ElementAcked-by: Andrew Lunn Signed-off-by: Josua Mayer Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

df70a90b032f641643312aaf32442a2018b4bc3d - arm64: dts: Add support for LX2160 Twins board in single configuration

Sun, 24 May 2026 16:54:48 +0200

arm64: dts: Add support for LX2160 Twins board in single configurationAdd support for the SolidRun LX2160A Twins board in its single cpuconfiguration.The twins board is designed to host a pair of LX2160A CEX-7 modules,sharing a single PCI-E connector in multi-host mode.It may be assembled in two configurations (different assembly optionsfacilitating signal re-routing), with a single or with dual CEX-7module. Their marketing names are:- SolidWAN Single LX2160- SolidWAN Dual LX2160Add the single configuration, featuring:- 8x SFP (1Gbps)- 8x SFP+ (1/10Gbps)- PCI-E OCP card connector- USB-3.0 front-panel header with single port- microSD- dual hot-swappable power suppliesSigned-off-by: Josua Mayer Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

bb020f383caa2c824594a57e54aaa2835bbfb22f - arm64: dts: imx8mp: Add DT overlays for DH i.MX8M Plus DHCOM SoM and boards

Thu, 26 Mar 2026 05:43:21 +0100

arm64: dts: imx8mp: Add DT overlays for DH i.MX8M Plus DHCOM SoM and boardsAdd DT overlays to support DH i.MX8M Plus DHCOM SoM variants and carrierboard expansion modules. The following DT overlays are implemented:- SoM: - DH 660-x00 SoM with 1xRMII PHY - DH 660-x00 SoM with 2xRMII PHY- PDK2: - DH 505-200 Display board in edge connector X12 via direct LVDS - DH 531-100 SPI/I2C board in header X21 - DH 531-200 SPI/I2C board in header X22 - DH 560-200 Display board in edge connector X12- PDK3: - DH 505-200 Display board in edge connector X36 via direct LVDS - DH 531-100 SPI/I2C board in header X40 - DH 531-200 SPI/I2C board in header X41 - DH 560-300 Display board in edge connector X36 - EA muRata 2AE M.2 A/E-Key card in connector X20 - NXP SPF-29853-C1 MINISASTOCSI with OV5640 sensor in connector X31 - NXP SPF-29853-C1 MINISASTOCSI with OV5640 sensor in connector X29- PicoITX: - DH 626-100 Display board in edge connector X2Signed-off-by: Marek Vasut Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

54d60132995b7c516c7a531975d8bc5d9187ce04 - arm64: dts: imx93-9x9-qsb: Add tianma,tm050rdh03 panel

Tue, 07 Apr 2026 11:15:31 +0200

arm64: dts: imx93-9x9-qsb: Add tianma,tm050rdh03 panelSupport tianma,tm050rdh03 DPI panel on i.MX93 9x9 QSB.Move the common parts from imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtso intoimx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtsi for reuse by the tm050rdh03overlay file.The panel connects with the QSB board through an adapter board[1]designed by NXP.Link: https://www.nxp.com/design/design-center/development-boards-and-designs/parallel-lcd-display:TM050RDH03-41 [1]Signed-off-by: Liu Ying Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

56cf0c79f598a5c24ec32d6ade206b9c62b1fcf8 - arm64: dts: imx: Add common imx-m2-pcie.dtso to enable PCIe on M.2 connector

Thu, 07 May 2026 08:53:30 +0200

arm64: dts: imx: Add common imx-m2-pcie.dtso to enable PCIe on M.2 connectorSome i.MX boards (i.MX8MP EVK and i.MX95-15x15 EVK) have M.2 connectorsthat are physically wired to both USDHC and PCIe controllers. Thedefault device tree enables USDHC for SDIO WiFi modules and disablesPCIe to avoid regulator conflicts.Add a common imx-m2-pcie.dtso that can be applied to enable PCIe anddisable USDHC when a PCIe module is installed in the M.2 connector.This creates the following DTB files:- imx8mp-evk-pcie.dtb: i.MX8MP EVK with PCIe enabled- imx95-15x15-evk-pcie.dtb: i.MX95-15x15 EVK with PCIe enabledSigned-off-by: Sherry Sun Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

9a8f11f6f786f42b35c9b0944a2b87052d28cd48 - arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1] support

Wed, 06 May 2026 07:53:16 +0200

arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1] supportAdd pcie[0,1] and pcie-ep[0,1] support.Signed-off-by: Richard Zhu Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

8a7c502c1e6e8dee65186698c198174a026f2ec2 - arm64: dts: imx8mn: Sort ifm VHIP4 EvalBoard Makefile entries

Wed, 22 Apr 2026 23:09:23 +0200

arm64: dts: imx8mn: Sort ifm VHIP4 EvalBoard Makefile entriesSort the Makefile entries alphabetically. No functional change.Signed-off-by: Marek Vasut Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

828a9ac30954667fe3053a0ead51a97023c37829 - arm64: dts: freescale: imx95-verdin: Add Zinnia

Thu, 09 Apr 2026 11:58:53 +0200

arm64: dts: freescale: imx95-verdin: Add ZinniaAdd Zinnia Carrier Board mated with Verdin iMX95.It features 1 x RS232, 1 x RS485, 1 x CAN, 3 x isolated digital I/O,2 x GBit/s Ethernet, a mini PCIe slot with USB / SIM card connectorfor a modem, USB and SD card interfaces.Link: https://www.toradex.com/products/carrier-board/zinnia-carrier-boardSigned-off-by: Francesco Dolcini Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

e3177171b6e90850623436e9eb3bcbf9915dcc1a - arm64: dts: freescale: imx8mp-verdin: Add Zinnia

Thu, 09 Apr 2026 11:58:51 +0200

arm64: dts: freescale: imx8mp-verdin: Add ZinniaAdd Zinnia Carrier Board mated with Verdin iMX8M Plus.It features 1 x RS232, 1 x RS485, 1 x CAN, 3 x isolated digital I/O,2 x GBit/s Ethernet, a mini PCIe slot with USB / SIM card connectorfor a modem, USB and SD card interfaces.Link: https://www.toradex.com/products/carrier-board/zinnia-carrier-boardSigned-off-by: Francesco Dolcini Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

de2e5e6c695a6fe5cfa780cd63ade651a6508d00 - arm64: dts: freescale: imx8mm-verdin: Add Zinnia

Thu, 09 Apr 2026 11:58:49 +0200

arm64: dts: freescale: imx8mm-verdin: Add ZinniaAdd Zinnia Carrier Board mated with Verdin iMX8M Mini.It features 1 x RS232, 1 x RS485, 1 x CAN, 3 x isolated digital I/O,1 x GBit/s Ethernet, a mini PCIe slot with USB / SIM card connectorfor a modem, USB and SD card interfaces.Link: https://www.toradex.com/products/carrier-board/zinnia-carrier-boardSigned-off-by: Francesco Dolcini Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

b3292129dcef91ce4a4df878a9286a39fed0c811 - arm64: dts: imx91-var-som: Add support for Variscite Symphony board

Wed, 08 Apr 2026 19:39:46 +0200

arm64: dts: imx91-var-som: Add support for Variscite Symphony boardAdd device tree support for the Variscite Symphony carrier board withthe VAR-SOM-MX91 system on module.The Symphony board includes- uSD Card support- USB ports and OTG- Additional Gigabit Ethernet interface- Uart, ADC and I2C interfaces- GPIO Expanders- RTC module- TPM module- CAN peripheralLink: https://variscite.com/carrier-boards/symphony-board/Signed-off-by: Stefano Radaelli Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

3bfec2d4747452e130f25e8422c59a1415aca815 - arm64: dts: imx93-var-dart: Add support for Variscite Sonata board

Fri, 27 Mar 2026 10:08:56 +0100

arm64: dts: imx93-var-dart: Add support for Variscite Sonata boardAdd device tree support for the Variscite Sonata carrier board with theDART-MX93 system on module.The Sonata board includes- uSD Card support- USB ports and OTG- Additional Gigabit Ethernet interface- Uart, SPI and I2C interfaces- GPIO Expanders- RTC module- TPM module- CAN peripheralsLink: https://variscite.com/carrier-boards/sonata-board/Signed-off-by: Stefano Radaelli Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

da8dafc4dd394fa287def25bbce51eff3f761acb - arm64: dts: freescale: add initial device tree for TQMa8x

Thu, 26 Mar 2026 14:02:21 +0100

arm64: dts: freescale: add initial device tree for TQMa8xThis adds support for TQMa8QM module on MBa8x board, based on i.MX8 SoC.Signed-off-by: Alexander Stein Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

c64e79096d225454a56830ec1fb5e5a464939073 - arm64: dts: freescale: add i.MX91 9x9 QSB basic support

Thu, 26 Mar 2026 08:51:41 +0100

arm64: dts: freescale: add i.MX91 9x9 QSB basic supportAdd i.MX91 9x9 Quick Start Board support.- Enable ADC1.- Enable lpuart1.- Enable network eqos.- Enable I2C bus and children nodes under I2C bus.- Enable USB and related nodes.- Enable uSDHC1 and uSDHC2.- Enable Watchdog3.The board description can refer to the following link:https://www.nxp.com/design/design-center/development-boards-and-designs/IMX91QSBSigned-off-by: Joy Zou Reviewed-by: Daniel Baluta Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile

7b5d318616888360a93cf0830705ce51b5452078 - arm64: dts: add support for NXP i.MX95 15x15 audio board (version 2)

Tue, 24 Mar 2026 07:15:56 +0100

arm64: dts: add support for NXP i.MX95 15x15 audio board (version 2)i.MX Audio Board is a configurable and functional audio processingplatform. Integrating a variety of audio input and output interfaces intothe system, the i.MX Audio Board supports HDMI input, HDMI eARC,S/PDIF I/O, 2-ch ADC line-in, 24-ch DAC line-out and more. Based on thesefeatures, rich audio application cases can be realized.This is a basic device tree supporting with i.MX95 15x15 SoC and Audioboard (version 2).- Six Cortex-A55- NXP PCAL6416 GPIO expanders- RGB LEDs via GPIO expander- LPI2C1, LPI2C2, LPI2C3 controllers- LPUART1 (console)- USDHC1 (eMMC), USDHC2 (SD)- Three DAC (AK4458)- One ADC (AK5552)Signed-off-by: Shengjiu Wang Signed-off-by: Frank Li List of files: /linux/scripts/dtc/include-prefixes/arm64/freescale/Makefile