en Copyright 2015 Java http://kernelsources.org:8080/source/history/linux/drivers/phy/spacemit/Kconfig#c17ee635fd3a482b2ad2bf5e269755c2eae5f25e Merge drm/drm-fixes into drm-misc-fixes7.0-rc1 was just released, let's merge it to kick the new release cycle.Signed-off-by: Maxime Ripard <mripard@kernel.org> List of files: /linux/drivers/phy/spacemit/Kconfig Mon, 23 Feb 2026 10:09:45 +0100 Maxime Ripard <mripard@kernel.org> http://kernelsources.org:8080/source/history/linux/drivers/phy/spacemit/Kconfig#9b725d5959a1d9bb670ccdb23add45f0eaafefb5 Merge tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phyPull phy updates from Vinod Koul: "Core: - Add suuport for "rx-polarity" and "tx-polarity" device tree properties and phy common properties to manage this New Support: - Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy, USB UNI PHY and SMB2370 eUSB2 repeater. SC8280xp QMP UFS PHY, Kaanapali PCIe phy and QMP PHY, QCS615 QMP USB3+DP PHY and driver support for that. - SpacemiT PCIe/combo PHY and K1 USB2 PHY driver. - HDMI 2.1 FRL configuration support and driver enabling for rockchip samsung-hdptx driver - TI TCAN1046 phy - Renesas RZ/V2H(P) and RZ/V2N usb3 - Mediatek MT8188 hdmi-phy - Google Tensor SoC USB PHY driver - Apple Type-C PHY Updates: - Subsystem conversion for clock round_rate() to determine_rate() - TI USB3 DT schema conversion - Samsung ExynosAutov920 usb3, combo hsphy and ssphy support"* tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (143 commits) phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate() dt-bindings: phy: ti,control-phy-otghs: convert to DT schema dt-bindings: phy: ti,phy-usb3: convert to DT schema phy: tegra: xusb: Remove unused powered_on variable phy: renesas: rcar-gen3-usb2: add regulator dependency phy: GOOGLE_USB: add TYPEC dependency phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY phy: renesas: rcar-gen3-usb2: Use mux-state for phyrst management phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable() phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC dt-bindings: phy: renesas,usb2-phy: Document mux-states property dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config phy: rockchip: samsung-hdptx: Drop hw_rate driver data phy: rockchip: samsung-hdptx: Compute clk rate from PLL config phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists ... List of files: /linux/drivers/phy/spacemit/Kconfig Tue, 17 Feb 2026 20:40:04 +0100 Linus Torvalds <torvalds@linux-foundation.org> http://kernelsources.org:8080/source/history/linux/drivers/phy/spacemit/Kconfig#fe4bc1a08638309b6be1af37210930b856908eb7 phy: spacemit: support K1 USB2.0 PHY controllerThe SpacemiT K1 SoC includes three USB ports:- One USB2.0 OTG port- One USB2.0 host-only port- One USB3.0 port with an integrated USB2.0 DRD interfaceEach of these ports is connected to a USB2.0 PHY responsible for USB2transmission.This commit adds support for the SpacemiT K1 USB2.0 PHY, which iscompliant with the USB 2.0 specification and supports both 8-bit 60MHzand 16-bit 30MHz parallel interfaces.Signed-off-by: Ze Huang <huang.ze@linux.dev>Tested-by: Aurelien Jarno <aurelien@aurel32.net>Tested-by: Junzhong Pan <panjunzhong@linux.spacemit.com>Link: https://patch.msgid.link/20251017-k1-usb2phy-v6-2-7cf9ea2477a1@linux.devSigned-off-by: Vinod Koul <vkoul@kernel.org> List of files: /linux/drivers/phy/spacemit/Kconfig Fri, 17 Oct 2025 16:49:53 +0200 Ze Huang <huang.ze@linux.dev>