Changes in Makefile

bbfd5594756011167b8f8de9a00e0c946afda1e6 - Merge drm/drm-next into drm-intel-gt-next

Wed, 28 May 2025 09:20:17 +0200

Merge drm/drm-next into drm-intel-gt-nextNeed to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04).Signed-off-by: Joonas Lahtinen List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

db5302ae571beec635c1a96e7f72926a4e65195e - Merge drm/drm-next into drm-intel-next

Fri, 16 May 2025 09:22:36 +0200

Merge drm/drm-next into drm-intel-nextBackmerge to sync with v6.15-rc, xe, and specifically async flip changesin drm-misc.Signed-off-by: Jani Nikula List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

4f9786035f9e519db41375818e1d0b5f20da2f10 - Merge branch 'next' into for-linus

Mon, 02 Jun 2025 06:41:07 +0200

Merge branch 'next' into for-linusPrepare input updates for 6.16 merge window. List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

d51b9d81f7883f526b26e3ab903e646274aebeb1 - Merge tag 'v6.15-rc6' into next

Fri, 16 May 2025 01:20:39 +0200

Merge tag 'v6.15-rc6' into nextSync up with mainline to bring in xpad controller changes. List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

844e31bbaef7c8a6ff2c0fbac45c0c85b5484482 - Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next

Tue, 29 Apr 2025 22:42:29 +0200

Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-nextMerge drm-misc-next to get commit Fixes: fec450ca15af ("drm/display:hdmi: provide central data authority for ACR params").Signed-off-by: Rob Clark List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

3ab7ae8e07f888f223027f0ef84d33e43919ad55 - Merge drm/drm-next into drm-xe-next

Thu, 24 Apr 2025 13:34:55 +0200

Merge drm/drm-next into drm-xe-nextBackmerge to bring in linux 6.15-rc.Signed-off-by: Thomas Hellström List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

1afba39f9305fe4061a4e70baa6ebab9d41459da - Merge drm/drm-next into drm-misc-next

Mon, 07 Apr 2025 13:47:40 +0200

Merge drm/drm-next into drm-misc-nextBackmerging to get v6.15-rc1 into drm-misc-next. Also fixes abuild issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.Signed-off-by: Thomas Zimmermann List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

9f13acb2406a3aed90c6738b3a2f1c0e43118cbd - Merge tag 'v6.15-rc1' into x86/cpu, to refresh the branch with upstream changes

Fri, 11 Apr 2025 11:13:27 +0200

Merge tag 'v6.15-rc1' into x86/cpu, to refresh the branch with upstream changesSigned-off-by: Ingo Molnar List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

6ce0fdaae043803bb324d915ce0fe43316bf1e81 - Merge tag 'v6.15-rc1' into x86/asm, to refresh the branch

Wed, 09 Apr 2025 21:39:43 +0200

Merge tag 'v6.15-rc1' into x86/asm, to refresh the branchSigned-off-by: Ingo Molnar List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

1260ed77798502de9c98020040d2995008de10cc - Merge drm/drm-fixes into drm-misc-fixes

Tue, 08 Apr 2025 10:15:47 +0200

Merge drm/drm-fixes into drm-misc-fixesBackmerging to get updates from v6.15-rc1.Signed-off-by: Thomas Zimmermann List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

1a9239bb4253f9076b5b4b2a1a4e8d7defd77a95 - Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Thu, 27 Mar 2025 05:48:21 +0100

Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextPull networking updates from Jakub Kicinski: "Core & protocols: - Continue Netlink conversions to per-namespace RTNL lock (IPv4 routing, routing rules, routing next hops, ARP ioctls) - Continue extending the use of netdev instance locks. As a driver opt-in protect queue operations and (in due course) ethtool operations with the instance lock and not RTNL lock. - Support collecting TCP timestamps (data submitted, sent, acked) in BPF, allowing for transparent (to the application) and lower overhead tracking of TCP RPC performance. - Tweak existing networking Rx zero-copy infra to support zero-copy Rx via io_uring. - Optimize MPTCP performance in single subflow mode by 29%. - Enable GRO on packets which went thru XDP CPU redirect (were queued for processing on a different CPU). Improving TCP stream performance up to 2x. - Improve performance of contended connect() by 200% by searching for an available 4-tuple under RCU rather than a spin lock. Bring an additional 229% improvement by tweaking hash distribution. - Avoid unconditionally touching sk_tsflags on RX, improving performance under UDP flood by as much as 10%. - Avoid skb_clone() dance in ping_rcv() to improve performance under ping flood. - Avoid FIB lookup in netfilter if socket is available, 20% perf win. - Rework network device creation (in-kernel) API to more clearly identify network namespaces and their roles. There are up to 4 namespace roles but we used to have just 2 netns pointer arguments, interpreted differently based on context. - Use sysfs_break_active_protection() instead of trylock to avoid deadlocks between unregistering objects and sysfs access. - Add a new sysctl and sockopt for capping max retransmit timeout in TCP. - Support masking port and DSCP in routing rule matches. - Support dumping IPv4 multicast addresses with RTM_GETMULTICAST. - Support specifying at what time packet should be sent on AF_XDP sockets. - Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users. - Add Netlink YAML spec for WiFi (nl80211) and conntrack. - Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols which only need to be exported when IPv6 support is built as a module. - Age FDB entries based on Rx not Tx traffic in VxLAN, similar to normal bridging. - Allow users to specify source port range for GENEVE tunnels. - netconsole: allow attaching kernel release, CPU ID and task name to messages as metadata Driver API: - Continue rework / fixing of Energy Efficient Ethernet (EEE) across the SW layers. Delegate the responsibilities to phylink where possible. Improve its handling in phylib. - Support symmetric OR-XOR RSS hashing algorithm. - Support tracking and preserving IRQ affinity by NAPI itself. - Support loopback mode speed selection for interface selftests. Device drivers: - Remove the IBM LCS driver for s390 - Remove the sb1000 cable modem driver - Add support for SFP module access over SMBus - Add MCTP transport driver for MCTP-over-USB - Enable XDP metadata support in multiple drivers - Ethernet high-speed NICs: - Broadcom (bnxt): - add PCIe TLP Processing Hints (TPH) support for new AMD platforms - support dumping RoCE queue state for debug - opt into instance locking - Intel (100G, ice, idpf): - ice: rework MSI-X IRQ management and distribution - ice: support for E830 devices - iavf: add support for Rx timestamping - iavf: opt into instance locking - nVidia/Mellanox: - mlx4: use page pool memory allocator for Rx - mlx5: support for one PTP device per hardware clock - mlx5: support for 200Gbps per-lane link modes - mlx5: move IPSec policy check after decryption - AMD/Solarflare: - support FW flashing via devlink - Cisco (enic): - use page pool memory allocator for Rx - enable 32, 64 byte CQEs - get max rx/tx ring size from the device - Meta (fbnic): - support flow steering and RSS configuration - report queue stats - support TCP segmentation - support IRQ coalescing - support ring size configuration - Marvell/Cavium: - support AF_XDP - Wangxun: - support for PTP clock and timestamping - Huawei (hibmcge): - checksum offload - add more statistics - Ethernet virtual: - VirtIO net: - aggressively suppress Tx completions, improve perf by 96% with 1 CPU and 55% with 2 CPUs - expose NAPI to IRQ mapping and persist NAPI settings - Google (gve): - support XDP in DQO RDA Queue Format - opt into instance locking - Microsoft vNIC: - support BIG TCP - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - cleanup Tx and Tx clock setting and other link-focused cleanups - enable SGMII and 2500BASEX mode switching for Intel platforms - support Sophgo SG2044 - Broadcom switches (b53): - support for BCM53101 - TI: - iep: add perout configuration support - icssg: support XDP - Cadence (macb): - implement BQL - Xilinx (axinet): - support dynamic IRQ moderation and changing coalescing at runtime - implement BQL - report standard stats - MediaTek: - support phylink managed EEE - Intel: - igc: don't restart the interface on every XDP program change - RealTek (r8169): - support reading registers of internal PHYs directly - increase max jumbo packet size on RTL8125/RTL8126 - Airoha: - support for RISC-V NPU packet processing unit - enable scatter-gather and support MTU up to 9kB - Tehuti (tn40xx): - support cards with TN4010 MAC and an Aquantia AQR105 PHY - Ethernet PHYs: - support for TJA1102S, TJA1121 - dp83tg720: add randomized polling intervals for link detection - dp83822: support changing the transmit amplitude voltage - support for LEDs on 88q2xxx - CAN: - canxl: support Remote Request Substitution bit access - flexcan: add S32G2/S32G3 SoC - WiFi: - remove cooked monitor support - strict mode for better AP testing - basic EPCS support - OMI RX bandwidth reduction support - batman-adv: add support for jumbo frames - WiFi drivers: - RealTek (rtw88): - support RTL8814AE and RTL8814AU - RealTek (rtw89): - switch using wiphy_lock and wiphy_work - add BB context to manipulate two PHY as preparation of MLO - improve BT-coexistence mechanism to play A2DP smoothly - Intel (iwlwifi): - add new iwlmld sub-driver for latest HW/FW combinations - MediaTek (mt76): - preparation for mt7996 Multi-Link Operation (MLO) support - Qualcomm/Atheros (ath12k): - continued work on MLO - Silabs (wfx): - Wake-on-WLAN support - Bluetooth: - add support for skb TX SND/COMPLETION timestamping - hci_core: enable buffer flow control for SCO/eSCO - coredump: log devcd dumps into the monitor - Bluetooth drivers: - intel: add support to configure TX power - nxp: handle bootloader error during cmd5 and cmd7"* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits) unix: fix up for "apparmor: add fine grained af_unix mediation" mctp: Fix incorrect tx flow invalidation condition in mctp-i2c net: usb: asix: ax88772: Increase phy_name size net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string net: libwx: fix Tx L4 checksum net: libwx: fix Tx descriptor content for some tunnel packets atm: Fix NULL pointer dereference net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus net: phy: aquantia: add essential functions to aqr105 driver net: phy: aquantia: search for firmware-name in fwnode net: phy: aquantia: add probe function to aqr105 for firmware loading net: phy: Add swnode support to mdiobus_scan gve: add XDP DROP and PASS support for DQ gve: update XDP allocation path support RX buffer posting gve: merge packet buffer size fields gve: update GQ RX to use buf_size gve: introduce config-based allocation for XDP gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics ... List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

c924c5e9b8c65b3a479a90e5e37d74cc8cd9fe0a - Merge net-next/main to resolve conflicts

Tue, 18 Mar 2025 09:45:23 +0100

Merge net-next/main to resolve conflictsThere are a few conflicts between the work that wentinto wireless and that's here now, resolve them.Signed-off-by: Johannes Berg List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

40587f749df216889163dd6e02d88ad53e759e66 - Merge branch 'enic-enable-32-64-byte-cqes-and-get-max-rx-tx-ring-size-from-hw'

Tue, 11 Mar 2025 10:21:41 +0100

Merge branch 'enic-enable-32-64-byte-cqes-and-get-max-rx-tx-ring-size-from-hw'Satish Kharat via says:====================enic: enable 32, 64 byte cqes and get max rx/tx ring size from hwThis series enables using the max rx and tx ring sizes read from hw.For newer hw that can be up to 16k entries. This requires biggercompletion entries for rx queues. This series enables the use of the32 and 64 byte completion queues entries for enic rx queues onsupported hw versions. This is in addition to the exiting (default)16 byte rx cqes.Signed-off-by: Satish Kharat ====================Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-0-85804263dad8@cisco.comSigned-off-by: Paolo Abeni List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

e5f1bcd93d96b338c486f2376f260f7fc98b3cd5 - enic: added enic_wq.c and enic_wq.h

Wed, 05 Mar 2025 01:56:42 +0100

enic: added enic_wq.c and enic_wq.hMoves wq related function to enic_wq.c. Prepares fora cleaup of enic wq code path.Co-developed-by: Nelson Escobar Signed-off-by: Nelson Escobar Co-developed-by: John Daley Signed-off-by: John Daley Signed-off-by: Satish Kharat Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-6-85804263dad8@cisco.comSigned-off-by: Paolo Abeni List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

f3eba8edd885db439f4bfaa2cf9d766bad1ae6c5 - Merge branch 'enic-use-page-pool-api-for-receiving-packets'

Fri, 07 Feb 2025 02:17:04 +0100

Merge branch 'enic-use-page-pool-api-for-receiving-packets'John Daley says:====================enic: Use Page Pool API for receiving packetsUse the Page Pool API for RX. The Page Pool API improves bandwidth andCPU overhead by recycling pages instead of allocating new buffers in thedriver. Also, page pool fragment allocation for smaller MTUs is usedallow multiple packets to share pages.RX code was moved to its own file and some refactoring was donebeforehand to make the page pool changes more trasparent and to simplifythe resulting code.====================Link: https://patch.msgid.link/20250205235416.25410-1-johndale@cisco.comSigned-off-by: Jakub Kicinski List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

fe57762c6490581ae446956ab54d221262a4951b - enic: Move RX functions to their own file

Thu, 06 Feb 2025 00:54:13 +0100

enic: Move RX functions to their own fileMove RX handler code into its own file in preparation for furtherchanges. Some formatting changes were necessary in order to satisfycheckpatch but there were no functional changes.Co-developed-by: Nelson Escobar Signed-off-by: Nelson Escobar Co-developed-by: Satish Kharat Signed-off-by: Satish Kharat Signed-off-by: John Daley Link: https://patch.msgid.link/20250205235416.25410-2-johndale@cisco.comSigned-off-by: Jakub Kicinski List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

58e16d792a6a8c6b750f637a4649967fcac853dc - Merge branch 'ti-sysc-fixes' into fixes

Tue, 13 Aug 2019 12:40:10 +0200

Merge branch 'ti-sysc-fixes' into fixes List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

c39f2d9db0fd81ea20bb5cce9b3f082ca63753e2 - Merge branch 'next' into for-linus

Sat, 20 Jul 2019 06:07:56 +0200

Merge branch 'next' into for-linusPrepare second round of input updates for 5.3 merge window. List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

ecb41832bd2a7a3f8ac93527cec5e51e3827daed - Merge tag 'v5.2' into next

Mon, 15 Jul 2019 18:42:32 +0200

Merge tag 'v5.2' into nextSync up with mainline to resolve conflicts in iforce driver. List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile

74acee309fb2a434dce215d44014e6f8e06975ae - Merge branches 'for-5.2/fixes', 'for-5.3/doc', 'for-5.3/ish', 'for-5.3/logitech' and 'for-5.3/wacom' into for-linus

Wed, 10 Jul 2019 01:39:57 +0200

Merge branches 'for-5.2/fixes', 'for-5.3/doc', 'for-5.3/ish', 'for-5.3/logitech' and 'for-5.3/wacom' into for-linus List of files: /linux/drivers/net/ethernet/cisco/enic/Makefile