Changes in Makefile

c771600c6af14749609b49565ffb4cac2959710d - Merge drm/drm-next into drm-intel-gt-next

Wed, 05 Feb 2025 10:29:14 +0100

Merge drm/drm-next into drm-intel-gt-nextWe need4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")in order to land a i915 PMU simplification and a fix. That landed in 6.12and we are stuck at 6.9 so lets bump things forward.Signed-off-by: Tvrtko Ursulin List of files: /linux/drivers/iio/imu/bmi270/Makefile

60675d4ca1ef0857e44eba5849b74a3a998d0c0f - Merge branch 'linus' into x86/mm, to pick up fixes

Fri, 20 Dec 2024 10:25:44 +0100

Merge branch 'linus' into x86/mm, to pick up fixesSigned-off-by: Ingo Molnar List of files: /linux/drivers/iio/imu/bmi270/Makefile

25768de50b1f2dbb6ea44bd5148a87fe2c9c3688 - Merge branch 'next' into for-linus

Tue, 21 Jan 2025 06:37:39 +0100

Merge branch 'next' into for-linusPrepare input updates for 6.14 merge window. List of files: /linux/drivers/iio/imu/bmi270/Makefile

670af65d2ab4a6a9bb72f014b080757e291ad3fe - Merge branch 'for-6.14/constify-bin-attribute' into for-linus

Mon, 20 Jan 2025 09:58:12 +0100

Merge branch 'for-6.14/constify-bin-attribute' into for-linus- constification of 'struct bin_attribute' in various HID driver (Thomas Weißschuh) List of files: /linux/drivers/iio/imu/bmi270/Makefile

6d4a0f4ea72319c9a37c1a7191695467006dd272 - Merge tag 'v6.13-rc3' into next

Tue, 17 Dec 2024 18:40:45 +0100

Merge tag 'v6.13-rc3' into nextSync up with the mainline. List of files: /linux/drivers/iio/imu/bmi270/Makefile

302cc446cbd92aadff72a647cebc13d5634f8342 - Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Thu, 05 Dec 2024 20:48:58 +0100

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netCross-merge networking fixes after downstream PR (net-6.13-rc2).No conflicts or adjacent changes.Signed-off-by: Jakub Kicinski List of files: /linux/drivers/iio/imu/bmi270/Makefile

c5fb51b71788926feef0d07f30c8af1d5e4af1a6 - Merge remote-tracking branch 'pm/opp/linux-next' into HEAD

Fri, 03 Jan 2025 16:13:45 +0100

Merge remote-tracking branch 'pm/opp/linux-next' into HEADMerge pm/opp tree to get dev_pm_opp_get_bw()Signed-off-by: Rob Clark List of files: /linux/drivers/iio/imu/bmi270/Makefile

e7f0a3a6f7339af55f1ca2c27131739d75569c08 - Merge drm/drm-next into drm-intel-next

Wed, 11 Dec 2024 21:06:05 +0100

Merge drm/drm-next into drm-intel-nextCatching up with 6.13-rc2.Signed-off-by: Rodrigo Vivi List of files: /linux/drivers/iio/imu/bmi270/Makefile

8f109f287fdc7b8fc7dcb6b2190c8b17dc22fcda - Merge drm/drm-next into drm-xe-next

Mon, 02 Dec 2024 17:22:11 +0100

Merge drm/drm-next into drm-xe-nextA backmerge to get the PMT preparation work formerging the BMG PMT support.Signed-off-by: Rodrigo Vivi List of files: /linux/drivers/iio/imu/bmi270/Makefile

3aba2eba84e0219fb66061359052be81bd883d53 - Merge drm/drm-next into drm-misc-next

Mon, 02 Dec 2024 12:44:18 +0100

Merge drm/drm-next into drm-misc-nextKickstart 6.14 cycle.Signed-off-by: Maxime Ripard List of files: /linux/drivers/iio/imu/bmi270/Makefile

bcfd5f644c5b933cfb3c488220e40a03e011e8a4 - Merge tag 'v6.13-rc1' into perf/core, to refresh the branch

Mon, 02 Dec 2024 11:52:59 +0100

Merge tag 'v6.13-rc1' into perf/core, to refresh the branchSigned-off-by: Ingo Molnar List of files: /linux/drivers/iio/imu/bmi270/Makefile

c34e9ab9a612ee8b18273398ef75c207b01f516d - Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

Thu, 05 Dec 2024 18:09:29 +0100

Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linusASoC: Fixes for v6.13A few small fixes for v6.13, all system specific - the biggest thing isthe fix for jack handling over suspend on some Intel laptops. List of files: /linux/drivers/iio/imu/bmi270/Makefile

2eff01ee2881becc9daaa0d53477ec202136b1f4 - Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Fri, 29 Nov 2024 20:58:27 +0100

Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscPull char/misc/IIO/whatever driver subsystem updates from Greg KH: "Here is the 'big and hairy' char/misc/iio and other small driver subsystem updates for 6.13-rc1. Loads of things in here, and even a fun merge conflict! - rust misc driver bindings and other rust changes to make misc drivers actually possible. I think this is the tipping point, expect to see way more rust drivers going forward now that these bindings are present. Next merge window hopefully we will have pci and platform drivers working, which will fully enable almost all driver subsystems to start accepting (or at least getting) rust drivers. This is the end result of a lot of work from a lot of people, congrats to all of them for getting this far, you've proved many of us wrong in the best way possible, working code :) - IIO driver updates, too many to list individually, that subsystem keeps growing and growing... - Interconnect driver updates - nvmem driver updates - pwm driver updates - platform_driver::remove() fixups, loads of them - counter driver updates - misc driver updates (keba?) - binder driver updates and fixes - loads of other small char/misc/etc driver updates and additions, full details in the shortlog. All of these have been in linux-next for a while, with no other reported issues other than that merge conflict"* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits) mei: vsc: Fix typo "maintstepping" -> "mainstepping" firmware: Switch back to struct platform_driver::remove() misc: isl29020: Fix the wrong format specifier scripts/tags.sh: Don't tag usages of DEFINE_MUTEX fpga: Switch back to struct platform_driver::remove() mei: vsc: Improve error logging in vsc_identify_silicon() mei: vsc: Do not re-enable interrupt from vsc_tp_reset() dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188 spmi: pmic-arb: fix return path in for_each_available_child_of_node() iio: Move __private marking before struct element priv in struct iio_dev docs: iio: ad7380: add adaq4370-4 and adaq4380-4 iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4 iio: adc: ad7380: use local dev variable to shorten long lines iio: adc: ad7380: fix oversampling formula dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian misc: atmel-ssc: Use of_property_present() for non-boolean properties misc: keba: Add hardware dependency ... List of files: /linux/drivers/iio/imu/bmi270/Makefile

ffb4b4ed3e8f4782072ff03513f3531be6b2d3a7 - Merge tag 'iio-for-6.13a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Sat, 19 Oct 2024 09:33:36 +0200

Merge tag 'iio-for-6.13a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-nextJonathan writes:IIO: 1st set of new device support, features and cleanup for 6.13Changes in take2:- Additional patch to drop the accidentally added empty file.- Tidy up of a duplicate include.Two merges of other trees.6.12-rc2:To pull in the move of unaligned.h from include/asm to include/linuxThis was to resolve issues in linux-next.pwm/duty_offset-for6.13-rc1@PWM infrastructure that is use di the AD7625 ADC driver.New device support==================adi,ad7173- Add support for the AD4113 8 channel ADC.adi,ad7606- Add support for the AD7606C-16 and AD7606C-18 which have higher precision and support bipolar and differential channels. A lot of driver rework was needed to add the additional flexibility needed to support these parts.adi,ad7625- New driver supporting AD7625, AD7626, AD7960 and AD7961 LVDS connected ADCs. Interface uses a combination of a PWM control and an IIO backend (currently a custom FPGA IP).adi,ad8460- New driver for the ad8460 Waveform DAC. This high speed device is driven by a custom IP via a DMAEngine buffer.bosch,bmi270- New driver for this 6-axis IMU. A later patch adds SPI support.gehc,pmc-adc- New driver for this GE Healthcare ADC 16-channel 16 bit ADC.invensense,mpu6050- Add support for IAM-20680HT and IAM-20680HP variants of the IAM-20680 IMU that have better specifications in various ways including larger FIFO sizes.vishay,vl6030- Support the veml7700, a stripped down veml6030 ambient light sensor.- Support the veml6035 ambient light sensor.Features========liteon,ltr390- Allow configuration of sampling frequency- Support suspend and resume- Add interrupt support including threshold events + control over event reporting persistence.st,vl53l0x- Add support for continuous mode via IIO buffer support and a dataready trigger.ti,tmp0006- Add triggered buffer support using data ready interrupt.vishay,vl6030- Add regulator control support.vishay,vl6070- Add regulator control support.vishay,vl6180- Allow configuration of waiting between continuous samples.- Use the interrupt, if available, for single shot captures- Support continuous mode via the IIO triggered buffer interfaces.Cleanups and minor fixes========================tools/event monitor- Free dev_dir_name.treewide- Introduce aligned_s64 type for timestamps to replace s64 __aligned(8). Initial use in a few drivers - many others to follow.- Use dev_get_platform_data() instead of open-coding the access.- InvenSense email address and maintainer updates to reflect move to the tdk domain after acquisition.- Switch platform drivers from remove_new() back to remove() now all rework this was enabling is done.- More use of device_for_each_child_node_scoped() to remove need for manual caling of fwnode_handle_put() in early exits from the loop.- Use IIO_MAP() macro to replace some open-coded versions.- Constify struct iio_map arrays.- Use irq_get_trigger_type(irq) rather than irqd_get_trigger_type(irq_get_irq_data(irq);core- unsigned to unsigned int.adi,ad3552r- Fix to low a limit on max SPI clock speed. No rush to upstream this one as the binding that uses the higher speed will merge via this tree once ready.adi,ad5770r- Use get_unaligned_le16() instead of open-coding. Note this caused a merge issue in linux-next as unaligned.h has moved.adi,ad7606- Use read_avail() callback to handle the various _available attributes.- Wrap up all data related to channel scaling into a single structure as the use of this gets more complex for the -16 and -18 parts.adi,adf4371- Use chip_info structures and spi_get_device_match_data()- Drop spi_set_drvdata() as unused.- Reduce scope of struct clock as only touched in probe().- Use dev_err_probe() where appropriate.adi,axi-dac- Improve register naming to make field and register association clearer.- Fix a wrong register bit.amlogic,meson8-saradc- Allow the meson8-saradc to have the amlogic,hhi-sysctrl property.bosch,bmp280- Use u8 for the DMA buffer to avoid implication of other types given it can contain be24 data.- Use unsigned types to store raw values to make it clear they cannot be negative.- Drop unnecessary check for errors after IIR filter update.- Support soft reset to get device to know state on driver load.- Use bulk reads to retrieve the humidity calibration data.dynaimage,al3010- Make sure to powerdown device in error paths.invensense,icm42600- Add missing i2c_device-id tables.kionix,kmx61- Drop ACPI IDs that are not associated with valid ACPI vendor IDs and for which there is no evidence they are in use in real devices.liteon,ltrf261a- Document a bad compatible that we are supporting because it is in the wild in the Valve Steam Deck via ACPI PRP0001.maxim,max1363- Use get_unaligned_be16() instead of open-coding. Note this caused a merge issue in linux-next as unaligned.h has moved.mediatek,mt6360- Use get_unaligned_be16() instead of open-coding. Note this caused a merge issue in linux-next as unaligned.h has moved.microchip,pac1921- Drop various unnecessary type casts that were suggested by Wconversion compiler warnings which we do not use in IIO. Remove them because they hurt readability in cases where it is clear not overflow can occur.rohm,rpr0521- Use iio_poll_func_store_time() rather than open-coding a similar solution.semtech,sx9324- Make sx_common_get_raw_register() local to the only code that uses it.- Drop unnecessary acpi.h include.st,vl53l0x- Check the part ID register and print an info message if it is not what is expected.vishay,veml6030- Fix DT binding file name to include vishay- Use regmap_set_bits() for case where all bits are set.- Use dev_err_probe() where appropriate.- Add missing delay after powering up in resume path.- Drop a processed accessor for the white channel as there is no public information to allow a specific scale to be established.- Use read_avail() to replace explicit custom _available attributes.vishay,veml6070- Use guard() to allow early returns.- Add a devm callback to unregister the i2c device.- Use devm_iio_device_register() to simplify removal code.Various other minor improvements not called out explicitly.* tag 'iio-for-6.13a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (161 commits) iio: imu: bmi270: Remove duplicated include in bmi270_i2c.c iio: adc: ad7606: Drop spurious empty file. iio: light: rpr0521: Use generic iio_pollfunc_store_time() iio: light: vl6180: Add support for Continuous Mode iio: light: vl6180: Added Interrupt support for single shot access iio: light: vl6180: Add configurable inter-measurement period support MAINTAINERS: add entry for VEML6030 ambient light sensor driver iio: light: veml6030: add support for veml7700 dt-bindings: iio: light: veml6030: add veml7700 iio: light: veml6035: fix read_avail in no_irq case for veml6035 iio: dac: adi-axi-dac: update register names iio: dac: adi-axi-dac: fix wrong register bitfield docs: iio: new docs for ad7625 driver iio: adc: ad7625: add driver dt-bindings: iio: adc: add AD762x/AD796x ADCs iio: Convert unsigned to unsigned int iio: pressure: bmp280: Fix uninitialized variable iio: Switch back to struct platform_driver::remove() iio: imu: bmi323: remove redundant register definition iio: frequency: adf4371: make use of dev_err_probe() ... List of files: /linux/drivers/iio/imu/bmi270/Makefile

92cc50a00574d2c85ee6ebe142c88ce0634a750d - iio: imu: bmi270: Add spi driver for bmi270 imu

Wed, 02 Oct 2024 05:36:22 +0200

iio: imu: bmi270: Add spi driver for bmi270 imuImplement SPI driver for the Bosch BMI270 6-axis IMU. Provide raw readwrite access to acceleration and angle velocity measurements via the SPIinterface on the device.Signed-off-by: Alex Lanzano Link: https://patch.msgid.link/20241002033628.681812-1-lanzano.alex@gmail.comSigned-off-by: Jonathan Cameron List of files: /linux/drivers/iio/imu/bmi270/Makefile

3ea51548d6b255db201f37b2bca9a845e0120f5a - iio: imu: Add i2c driver for bmi270 imu

Thu, 12 Sep 2024 23:07:19 +0200

iio: imu: Add i2c driver for bmi270 imuAdd initial i2c support for the Bosch BMI270 6-axis IMU.Provides raw read access to acceleration and angle velocity measurementsvia iio channels. Device configuration requires firmware provided byBosch and is requested and load from userspace.Signed-off-by: Alex Lanzano Link: https://patch.msgid.link/20240912210749.3080157-3-lanzano.alex@gmail.comSigned-off-by: Jonathan Cameron List of files: /linux/drivers/iio/imu/bmi270/Makefile