Changes in Makefile

c771600c6af14749609b49565ffb4cac2959710d - Merge drm/drm-next into drm-intel-gt-next

Wed, 05 Feb 2025 10:29:14 +0100

Merge drm/drm-next into drm-intel-gt-nextWe need4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")in order to land a i915 PMU simplification and a fix. That landed in 6.12and we are stuck at 6.9 so lets bump things forward.Signed-off-by: Tvrtko Ursulin List of files: /linux/drivers/i2c/Makefile

60675d4ca1ef0857e44eba5849b74a3a998d0c0f - Merge branch 'linus' into x86/mm, to pick up fixes

Fri, 20 Dec 2024 10:25:44 +0100

Merge branch 'linus' into x86/mm, to pick up fixesSigned-off-by: Ingo Molnar List of files: /linux/drivers/i2c/Makefile

25768de50b1f2dbb6ea44bd5148a87fe2c9c3688 - Merge branch 'next' into for-linus

Tue, 21 Jan 2025 06:37:39 +0100

Merge branch 'next' into for-linusPrepare input updates for 6.14 merge window. List of files: /linux/drivers/i2c/Makefile

670af65d2ab4a6a9bb72f014b080757e291ad3fe - Merge branch 'for-6.14/constify-bin-attribute' into for-linus

Mon, 20 Jan 2025 09:58:12 +0100

Merge branch 'for-6.14/constify-bin-attribute' into for-linus- constification of 'struct bin_attribute' in various HID driver (Thomas Weißschuh) List of files: /linux/drivers/i2c/Makefile

6d4a0f4ea72319c9a37c1a7191695467006dd272 - Merge tag 'v6.13-rc3' into next

Tue, 17 Dec 2024 18:40:45 +0100

Merge tag 'v6.13-rc3' into nextSync up with the mainline. List of files: /linux/drivers/i2c/Makefile

302cc446cbd92aadff72a647cebc13d5634f8342 - Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Thu, 05 Dec 2024 20:48:58 +0100

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netCross-merge networking fixes after downstream PR (net-6.13-rc2).No conflicts or adjacent changes.Signed-off-by: Jakub Kicinski List of files: /linux/drivers/i2c/Makefile

c5fb51b71788926feef0d07f30c8af1d5e4af1a6 - Merge remote-tracking branch 'pm/opp/linux-next' into HEAD

Fri, 03 Jan 2025 16:13:45 +0100

Merge remote-tracking branch 'pm/opp/linux-next' into HEADMerge pm/opp tree to get dev_pm_opp_get_bw()Signed-off-by: Rob Clark List of files: /linux/drivers/i2c/Makefile

e7f0a3a6f7339af55f1ca2c27131739d75569c08 - Merge drm/drm-next into drm-intel-next

Wed, 11 Dec 2024 21:06:05 +0100

Merge drm/drm-next into drm-intel-nextCatching up with 6.13-rc2.Signed-off-by: Rodrigo Vivi List of files: /linux/drivers/i2c/Makefile

8f109f287fdc7b8fc7dcb6b2190c8b17dc22fcda - Merge drm/drm-next into drm-xe-next

Mon, 02 Dec 2024 17:22:11 +0100

Merge drm/drm-next into drm-xe-nextA backmerge to get the PMT preparation work formerging the BMG PMT support.Signed-off-by: Rodrigo Vivi List of files: /linux/drivers/i2c/Makefile

3aba2eba84e0219fb66061359052be81bd883d53 - Merge drm/drm-next into drm-misc-next

Mon, 02 Dec 2024 12:44:18 +0100

Merge drm/drm-next into drm-misc-nextKickstart 6.14 cycle.Signed-off-by: Maxime Ripard List of files: /linux/drivers/i2c/Makefile

bcfd5f644c5b933cfb3c488220e40a03e011e8a4 - Merge tag 'v6.13-rc1' into perf/core, to refresh the branch

Mon, 02 Dec 2024 11:52:59 +0100

Merge tag 'v6.13-rc1' into perf/core, to refresh the branchSigned-off-by: Ingo Molnar List of files: /linux/drivers/i2c/Makefile

c34e9ab9a612ee8b18273398ef75c207b01f516d - Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

Thu, 05 Dec 2024 18:09:29 +0100

Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linusASoC: Fixes for v6.13A few small fixes for v6.13, all system specific - the biggest thing isthe fix for jack handling over suspend on some Intel laptops. List of files: /linux/drivers/i2c/Makefile

a14bf463e7dfa389850b9d47d38dda4fa71c8ade - Merge tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Sun, 01 Dec 2024 22:38:24 +0100

Merge tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxPull i2c component probing support from Wolfram Sang: "Add OF component probing. Some devices are designed and manufactured with some components having multiple drop-in replacement options. These components are often connected to the mainboard via ribbon cables, having the same signals and pin assignments across all options. These may include the display panel and touchscreen on laptops and tablets, and the trackpad on laptops. Sometimes which component option is used in a particular device can be detected by some firmware provided identifier, other times that information is not available, and the kernel has to try to probe each device. Instead of a delicate dance between drivers and device tree quirks, this change introduces a simple I2C component probe function. For a given class of devices on the same I2C bus, it will go through all of them, doing a simple I2C read transfer and see which one of them responds. It will then enable the device that responds"* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: fix typo in I2C OF COMPONENT PROBER of: base: Document prefix argument for of_get_next_child_with_prefix() i2c: Fix whitespace style issue arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail platform/chrome: Introduce device tree hardware prober i2c: of-prober: Add GPIO support to simple helpers i2c: of-prober: Add simple helpers for regulator support i2c: Introduce OF component probe function of: base: Add for_each_child_of_node_with_prefix() of: dynamic: Add of_changeset_update_prop_string List of files: /linux/drivers/i2c/Makefile

157ce8f381efe264933e9366db828d845bade3a1 - i2c: Introduce OF component probe function

Wed, 06 Nov 2024 10:33:30 +0100

i2c: Introduce OF component probe functionSome devices are designed and manufactured with some components havingmultiple drop-in replacement options. These components are oftenconnected to the mainboard via ribbon cables, having the same signalsand pin assignments across all options. These may include the displaypanel and touchscreen on laptops and tablets, and the trackpad onlaptops. Sometimes which component option is used in a particular devicecan be detected by some firmware provided identifier, other times thatinformation is not available, and the kernel has to try to probe eachdevice.This change attempts to make the "probe each device" case cleaner. Thecurrent approach is to have all options added and enabled in the devicetree. The kernel would then bind each device and run each driver's probefunction. This works, but has been broken before due to the introductionof asynchronous probing, causing multiple instances requesting "shared"resources, such as pinmuxes, GPIO pins, interrupt lines, at the sametime, with only one instance succeeding. Work arounds for these includemoving the pinmux to the parent I2C controller, using GPIO hogs orpinmux settings to keep the GPIO pins in some fixed configuration, andrequesting the interrupt line very late. Such configurations can be seenon the MT8183 Krane Chromebook tablets, and the Qualcomm sc8280xp-basedLenovo Thinkpad 13S.Instead of this delicate dance between drivers and device tree quirks,this change introduces a simple I2C component probe function. For agiven class of devices on the same I2C bus, it will go through all ofthem, doing a simple I2C read transfer and see which one of them responds.It will then enable the device that responds.This requires some minor modifications in the existing device tree. Thestatus for all the device nodes for the component options must be setto "fail-needs-probe". This makes it clear that some mechanism isneeded to enable one of them, and also prevents the prober and devicedrivers running at the same time.Signed-off-by: Chen-Yu Tsai Reviewed-by: Andy Shevchenko Reviewed-by: Douglas Anderson Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Wolfram Sang List of files: /linux/drivers/i2c/Makefile

cf87766dd6f9ddcceaa8ee26e3cbd7538e42dd19 - Merge branch 'ovl.fixes'

Tue, 26 Nov 2024 18:15:06 +0100

Merge branch 'ovl.fixes'Bring in an overlayfs fix for v6.13-rc1 that fixes a bug introduced bythe overlayfs changes merged for v6.13.Signed-off-by: Christian Brauner List of files: /linux/drivers/i2c/Makefile

55ae3eef10ae813616bd8a421e318d4b0e2f4a0b - Merge tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Thu, 21 Nov 2024 22:19:29 +0100

Merge tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxPull i2c updates from Wolfram Sang: "Core: - drivers can now use a GPIO as a side channel for SMBus Alerts using a generic binding - regular stuff like mem leak fix, Makefile maintenance... Host improvements and refactoring: - All controllers using the 'remove_new' callback have been reverted to use the 'remove' callback - Intel SCH controller underwent significant refactoring, this brings love and a modern look to the driver - PIIX4 driver refactored to enable usage by other drivers (e.g., AMD ASF) - iMX/MXC improved message handling to reduce protocol overhead: Refactored DMA/non-DMA read/write and bus polling mechanisms to achieve this. - ACPI documentation for PIIX4 New host features: - i2c-cadence support for atomic transfers - Qualcomm CII support for a 32MHz serial engine clock Deprecated features: - Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If somebody misses this, Jean will rewrite support using the proper i2c mux framework. New hardware IDs for existing drivers: - Intel Panther Lake - S32G2/S32G3 SoCs - HJMC01 DesignWare ACPI HID - PIC64GX to Microchip Core - Qualcomm SDM670 to Qualcomm CCI New drivers: - AMD ASF - Realtek RTL I2C Controller at24 updates: - add support for the lockable page on ST M24256E"* tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (59 commits) docs: i2c: piix4: Add ACPI section i2c: Add driver for the RTL9300 I2C controller i2c: qcom-cci: Remove unused struct member cci_clk_rate dt-bindings: i2c: Add Realtek RTL I2C Controller i2c: busses: Use *-y instead of *-objs in Makefile i2c: imx: add support for S32G2/S32G3 SoCs dt-bindings: i2c: imx: add SoC specific compatible strings for S32G i2c: qcom-cci: Remove the unused variable cci_clk_rate i2c: Drop legacy muxing pseudo-drivers i2c: imx: prevent rescheduling in non dma mode i2c: imx: separate atomic, dma and non-dma use case i2c: imx: do not poll for bus busy in single master mode i2c: designware: Add a new ACPI HID for HJMC01 I2C controller i2c: qcom-geni: Keep comment why interrupts start disabled dt-bindings: i2c: microchip: corei2c: Add PIC64GX as compatible with driver i2c: designware: constify abort_sources i2c: Switch back to struct platform_driver::remove() i2c: qcom-geni: Support systems with 32MHz serial engine clock i2c: qcom-cci: Stop complaining about DT set clock rate dt-bindings: i2c: qcom-cci: Document SDM670 compatible ... List of files: /linux/drivers/i2c/Makefile

6fc0ce1d329ca8f24237e5fd9572699f961bf8b5 - i2c: Use -y instead of -objs in Makefile

Fri, 18 Oct 2024 17:03:37 +0200

i2c: Use *-y instead of *-objs in Makefile*-objs suffix is reserved rather for (user-space) host programs whileusually *-y suffix is used for kernel drivers (although *-objs worksfor that purpose for now).Let's correct the old usages of *-objs in Makefiles.Signed-off-by: Andy Shevchenko Signed-off-by: Wolfram Sang List of files: /linux/drivers/i2c/Makefile

3b2af08fadc4c931d3014e03804bf21afbcaa666 - i2c: core: Remove extra space in Makefile

Tue, 08 Oct 2024 09:34:22 +0200

i2c: core: Remove extra space in MakefileSome lines in the Makefile have a space before tabs. Remove those.Reported-by: Andy Shevchenko Closes: https://lore.kernel.org/all/ZsdE0PxKnGRjzChl@smile.fi.intel.com/Signed-off-by: Chen-Yu Tsai Reviewed-by: Andy Shevchenko Reviewed-by: Andi Shyti Signed-off-by: Wolfram Sang List of files: /linux/drivers/i2c/Makefile

a23e1966932464e1c5226cb9ac4ce1d5fc10ba22 - Merge branch 'next' into for-linus

Mon, 15 Jul 2024 23:03:44 +0200

Merge branch 'next' into for-linusPrepare input updates for 6.11 merge window. List of files: /linux/drivers/i2c/Makefile

6f47c7ae8c7afaf9ad291d39f0d3974f191a7946 - Merge tag 'v6.9' into next

Tue, 28 May 2024 06:37:18 +0200

Merge tag 'v6.9' into nextSync up with the mainline to bring in the new cleanup API. List of files: /linux/drivers/i2c/Makefile