Changes in Makefile

a4a508df2aa34f8650afde54ea804321c618f45f - Merge tag 'v6.18' into next

Sat, 13 Dec 2025 10:18:20 +0100

Merge tag 'v6.18' into nextSync up with the mainline to bring in the latest APIs. List of files: /linux/drivers/clk/sunxi-ng/Makefile

7362b5b493102c6b71827c2da22117b475528f6d - Merge branch 'for-6.19/nintendo' into for-linus

Tue, 02 Dec 2025 14:46:11 +0100

Merge branch 'for-6.19/nintendo' into for-linus- switch to WQ_PERCPU workaueues (Marco Crivellari)- reduce potential initialization blocking time of hid-nintendo (Willy Huang) List of files: /linux/drivers/clk/sunxi-ng/Makefile

cb9f145f638d7afa633632a9290d6ad06caeb8ee - Merge remote-tracking branch 'drm/drm-next' into msm-next-robclark

Sat, 01 Nov 2025 13:47:30 +0100

Merge remote-tracking branch 'drm/drm-next' into msm-next-robclarkBack-merge drm-next to get caught up.Signed-off-by: Rob Clark List of files: /linux/drivers/clk/sunxi-ng/Makefile

82ee50252dc891e3f3b32d923bb4f656d300b772 - Merge drm/drm-next into drm-xe-next

Tue, 14 Oct 2025 11:31:49 +0200

Merge drm/drm-next into drm-xe-nextBackmerging to bring in 6.18-rc1.Signed-off-by: Thomas Hellström List of files: /linux/drivers/clk/sunxi-ng/Makefile

2acee98fcc61052d63fab4539fcb6ee677555645 - Merge drm/drm-next into drm-intel-next

Tue, 14 Oct 2025 09:37:11 +0200

Merge drm/drm-next into drm-intel-nextSync to v6.18-rc1.Signed-off-by: Jani Nikula List of files: /linux/drivers/clk/sunxi-ng/Makefile

9b966ae42235a88eaea714be09ff3d698535bdfe - Merge drm/drm-next into drm-misc-next

Mon, 13 Oct 2025 09:19:19 +0200

Merge drm/drm-next into drm-misc-nextUpdating drm-misc-next to the state of v6.18-rc1.Signed-off-by: Thomas Zimmermann List of files: /linux/drivers/clk/sunxi-ng/Makefile

39e9d5f63075f4d54e3b59b8238478c32af92755 - Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf before 6.18-rc1

Sun, 12 Oct 2025 03:27:47 +0200

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf before 6.18-rc1Cross-merge BPF and other fixes after downstream PR.No conflicts.Signed-off-by: Alexei Starovoitov List of files: /linux/drivers/clk/sunxi-ng/Makefile

2ace52718376fdb56aca863da2eebe70d7e2ddb1 - Merge branch 'objtool/core'

Fri, 21 Nov 2025 11:21:20 +0100

Merge branch 'objtool/core'Bring in the UDB and objtool data annotations to avoid conflicts while further extending the bug exceptions.Signed-off-by: Peter Zijlstra List of files: /linux/drivers/clk/sunxi-ng/Makefile

f39b6c468c52745dbca9a842d91c8373fda208ab - Merge tag 'v6.18-rc6' into for-linus

Tue, 18 Nov 2025 08:16:55 +0100

Merge tag 'v6.18-rc6' into for-linusSync up with the mainline to bring in definition ofINPUT_PROP_HAPTIC_TOUCHPAD. List of files: /linux/drivers/clk/sunxi-ng/Makefile

4f38da1f027ea2c9f01bb71daa7a299c191b6940 - spi: Merge up v6.18-rc1

Mon, 13 Oct 2025 14:32:13 +0200

spi: Merge up v6.18-rc1Ensure my CI has a sensible baseline. List of files: /linux/drivers/clk/sunxi-ng/Makefile

ec2e0fb07d789976c601bec19ecced7a501c3705 - Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

Thu, 16 Oct 2025 20:14:24 +0200

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linusASoC: Fixes for v6.18A moderately large collection of driver specific fixes, plus a few newquirks and device IDs. The NAU8821 changes are a little large but morein mechanical ways than in ways that are complex. List of files: /linux/drivers/clk/sunxi-ng/Makefile

48a710760e10a4f36e11233a21860796ba204b1e - Merge drm/drm-fixes into drm-misc-fixes

Tue, 14 Oct 2025 10:59:58 +0200

Merge drm/drm-fixes into drm-misc-fixesUpdating drm-misc-fixes to the state of v6.18-rc1.Signed-off-by: Thomas Zimmermann List of files: /linux/drivers/clk/sunxi-ng/Makefile

522ba450b56fff29f868b1552bdc2965f55de7ed - Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Tue, 07 Oct 2025 18:28:37 +0200

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxPull clk updates from Stephen Boyd: "There's a bunch of patches here across drivers/clk/ to migrate drivers to use struct clk_ops::determine_rate() instead of the round_rate() one so that we can remove the round_rate clk_op entirely. Brian has taken up that task which nobody else has wanted to do for close to a decade. Thanks Brian! This is all prerequisite work to get to the real task of improving the clk rate setting process. Once we have determine_rate() used everywhere, we'll be able to do things like chain the rate request structs in linked lists to order the rate setting operations or add more parameters without having to change every clk driver in existence. It's also nice to not have multiple ways to do something which just causes confusion for clk driver authors. Overall I'm glad this is getting done. Beyond this change we also have a tweak to the clk_lookup() function in the core framework to use hashing on the clk name instead of a clk tree walk with string comparisons. We _still_ rely on the clk name to be unique, because historically we've used globally unique strings to describe the clk tree topology. This tree walk becomes increasingly slow as more clks are added to the system. Searching from the roots for a duplicate is simple but pretty dumb and it wastes boot time so we're using a hash table as an improvement. Ideally we wouldn't rely on the strings to be unique at all, relegating them to simply debug information, but that is future work that will likely require some sort of Kconfig knob indicating strings aren't used for topology description. Outside of the core framework changes we have the usual new SoC support and fixes to clk drivers for things that were discovered once the clks were used by consumer drivers. Nothing in particular is jumping out at me in the "misc" pile, except maybe the Amlogic driver that has gone through a refactoring. That series got a fix from testing in -next though so it seems likely that things have been getting good test coverage for a couple weeks already"* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (299 commits) clk: microchip: core: remove duplicate roclk_determine_rate() reset: aspeed: register AST2700 reset auxiliary bus device dt-bindings: clock: ast2700: modify soc0/1 clock define clk: tegra: do not overallocate memory for bpmp clocks clk: ep93xx: Use int type to store negative error codes clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver clk: loongson2: Add clock definitions for Loongson-2K0300 SoC clk: loongson2: Avoid hardcoding firmware name of the reference clock clk: loongson2: Allow zero divisors for dividers clk: loongson2: Support scale clocks with an alternative mode clk: loongson2: Allow specifying clock flags for gate clock dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible clk: clocking-wizard: Fix output clock register offset for Versal platforms clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver() clk: mmp: pxa1908: Instantiate power driver through auxiliary bus clk: s2mps11: add support for S2MPG10 PMIC clock dt-bindings: clock: samsung,s2mps11: add s2mpg10 dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings clk: stm32: introduce clocks for STM32MP21 platform dt-bindings: stm32: add STM32MP21 clocks and reset bindings ... List of files: /linux/drivers/clk/sunxi-ng/Makefile

c1e102f349bee5ae73e326339ea45daff4847b71 - Merge branches 'clk-imx', 'clk-allwinner' and 'clk-ti' into clk-next

Mon, 06 Oct 2025 19:56:54 +0200

Merge branches 'clk-imx', 'clk-allwinner' and 'clk-ti' into clk-next* clk-imx: clk: imx95-blk-ctl: Save/restore registers when RPM routines are called clk: imx95-blk-ctl: Save platform data in imx95_blk_ctl structure* clk-allwinner: clk: sunxi-ng: add support for the A523/T527 MCU CCU clk: sunxi-ng: div: support power-of-two dividers clk: sunxi-ng: sun55i-a523-ccu: Add missing NPU module clock dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock clk: sunxi-ng: sun6i-rtc: Add A523 specifics* clk-ti: clk: keystone: sci-clk: use devm_kmemdup_array() clk: ti: am33xx: keep WKUP_DEBUGSS_CLKCTRL enabled List of files: /linux/drivers/clk/sunxi-ng/Makefile

597fe80ba3fc55b67cd3aaed8431a3607f519f5b - Merge tag 'sunxi-clk-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner

Sat, 20 Sep 2025 06:50:38 +0200

Merge tag 'sunxi-clk-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinnerPull Allwinner clk driver updates from Chen-Yu Tsai:In this cycle support for power-of-two single divider clocks was added.This covers some of the clocks found in the A523 MCU PRCM clock andreset controller, for which support was added as well.Besides the new controller, a missing clock was added for the A523'smain clock controller. The RTC clock driver gained specifics for theA523's RTC block for tweaking the clock rate of the internal oscillatorto get it closer to what the RTC needs.* tag 'sunxi-clk-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: add support for the A523/T527 MCU CCU clk: sunxi-ng: div: support power-of-two dividers clk: sunxi-ng: sun55i-a523-ccu: Add missing NPU module clock dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock clk: sunxi-ng: sun6i-rtc: Add A523 specifics List of files: /linux/drivers/clk/sunxi-ng/Makefile

598e4b6713b54267acc257b3c66a269079ee4d8f - clk: sunxi-ng: add support for the A523/T527 MCU CCU

Thu, 11 Sep 2025 19:47:08 +0200

clk: sunxi-ng: add support for the A523/T527 MCU CCUThe A523/T527 SoCs have a new MCU PRCM, which has more clocks and resetcontrols for the RISC-V MCU and other peripherals. There is a secondaudio PLL, but no bus clock dividers. The BSP driver uses the 24MHz mainoscillator as the parent for all the bus clocks. But the diagramsuggests busses from the other PRCM are used in this block as well.Add a driver to support this part. Unlike the BSP driver, the SoC's mainMBUS clock is chosen as the parent for the MCU MBUS clock, and thelatter then serves as the parent of the MCU DMA controller's MBUS clock.The bus gate clocks also use their respective bus clocks as parentsaccording to the system bus tree diagram. In cases where a block doesnot appear in that diagram, an educated guess is made.Reviewed-by: Jernej Skrabec Link: https://patch.msgid.link/20250911174710.3149589-6-wens@kernel.orgSigned-off-by: Chen-Yu Tsai List of files: /linux/drivers/clk/sunxi-ng/Makefile

bbfd5594756011167b8f8de9a00e0c946afda1e6 - Merge drm/drm-next into drm-intel-gt-next

Wed, 28 May 2025 09:20:17 +0200

Merge drm/drm-next into drm-intel-gt-nextNeed to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04).Signed-off-by: Joonas Lahtinen List of files: /linux/drivers/clk/sunxi-ng/Makefile

db5302ae571beec635c1a96e7f72926a4e65195e - Merge drm/drm-next into drm-intel-next

Fri, 16 May 2025 09:22:36 +0200

Merge drm/drm-next into drm-intel-nextBackmerge to sync with v6.15-rc, xe, and specifically async flip changesin drm-misc.Signed-off-by: Jani Nikula List of files: /linux/drivers/clk/sunxi-ng/Makefile

4f9786035f9e519db41375818e1d0b5f20da2f10 - Merge branch 'next' into for-linus

Mon, 02 Jun 2025 06:41:07 +0200

Merge branch 'next' into for-linusPrepare input updates for 6.16 merge window. List of files: /linux/drivers/clk/sunxi-ng/Makefile

d51b9d81f7883f526b26e3ab903e646274aebeb1 - Merge tag 'v6.15-rc6' into next

Fri, 16 May 2025 01:20:39 +0200

Merge tag 'v6.15-rc6' into nextSync up with mainline to bring in xpad controller changes. List of files: /linux/drivers/clk/sunxi-ng/Makefile