Changes in Makefile

0fc8f6200d2313278fbf4539bbab74677c685531 - Merge drm/drm-fixes into drm-misc-fixes

Mon, 27 Apr 2026 10:26:49 +0200

Merge drm/drm-fixes into drm-misc-fixesGetting fixes and updates from v7.1-rc1.Signed-off-by: Thomas Zimmermann List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

f4b369c6fe0ceaba2da2daff8c9eb415f85926dd - Merge branch 'next' into for-linus

Mon, 20 Apr 2026 03:28:57 +0200

Merge branch 'next' into for-linusPrepare input updates for 7.1 merge window. List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

0421ccdfad0d92713a812a5aeb7d07b0ea7213c8 - Merge tag 'v7.0-rc3' into next

Thu, 12 Mar 2026 18:44:42 +0100

Merge tag 'v7.0-rc3' into nextSync up with the mainline to brig up the latest changes, specificallychanges to ALPS driver. List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

e65f4718a577fcc84d40431f022985898b6dbf2e - Merge tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Fri, 17 Apr 2026 05:28:48 +0200

Merge tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socPull SoC devicetree updates from Arnd Bergmann: "A number of SoC platforms are adding modernized variants of their already supported chips time, with a total of 12 new SoCs, and two older SoC getting removed: - Qualcomm Glymur is a compute SoC using 18 Oryon-2 CPU cores - Qualcomm Mahua is a variant of Glymur with only 12 CPU cores, but largely identical. - Qualcomm Eliza is an embeded platform for mobile phone (SM7750) and IOT (QC7790S/M) workloads - Qualcomm IPQ5210 is a wireless networking SoC using Cortex-A53 cores - Qualcomm apq8084 and ipq806x had only rudimentary support but no actual products using them, so they are now gone. - Axis ARTPEC-9 is a follow-up to the ARTPEC-8 embedded SoC, using the Samsung SoC platform but now with Cortex-A55 cores - ARM Zena is a virtual platform in FVP using Cortex-A720AE cores, with additional versions planned to be merged in the future. - ARM corstone-1000-a320 is a reference platform for IOT, using low-end Cortex-A320 cores - Microchip LAN9691 is an updated 64-bit variant of the arm32 lan966x series of networking SoCs - Microchip PIC64GX is an embedded RISC-V chip using SIFIVE U54 CPU cores - Rockchip RV1103B is the low-end 32-bit single-core vision processor - Renesas RZ/G3L (r9a08g046) is an industrial embedded chip using Cortex-A55 cores, similar to the G3E and G3S variants we already supported. - NXP S32N79 is an automotive SoC using Cortex-A78AE cores, a significant upgrade from the older S32V and S32G series These all come with at least one reference board or an initial product using these, in total there are 67 newly added boards. The ones for already supported SoCs are: - Two more Aspeed BMC based boards - Three older tablets based on 32-bit OMAP4 and Exynos5 SoCs - One Set-top-box based on Allwinner H6 - 22 additional industrial/embedded boards using 64-bit NXP i.MX8M or i.MX9 SoCs - 20 Qualcomm SoC based machines across all possible markets: workstation, gaming, laptop, phone, networking, reference, ... - Three more Rockchips rk35xx based boards - Four variants of the Toradex Verdin using TI AM62 Other notable bits are: - A cleanup for the 32-bit Tegra paz00 board moved the last board specific code on Tegra into equivalent dts syntax. - There continues to be a significant number of fixes for static checking of dtc syntax, but it feels like this is slowing down, hopefully getting into a state where most known issues are addressed - Additional hardware support for many existing boards across SoC families, notably Qualcomm, Broadcom, i.MX2, i.MX6, Rockchips, STM32, Mediatek, Tegra, TI and Microchip"* tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (841 commits) arm64: dts: ti: k3: Use memory-region-names for r5f ARM: dts: imx: Add DT overlays for DH i.MX6 DHCOM SoM and boards ARM: dts: imx6sx: remove fallback compatible string fsl,imx28-lcdif ARM: dts: imx25: rename node name tcq to touchscreen ARM: dts: imx: b850v3: Disable unused usdhc4 ARM: dts: imx: b850v3: Define GPIO line names ARM: dts: imx: b850v3: Use alphabetical sorting ARM: dts: imx: bx50v3: Configure phy-mode to eliminate a warning ARM: dts: imx: bx50v3: Configure switch PHY max-speed to 100Mbps ARM: dts: imx7ulp: Add CPU clock and OPP table support ARM: dts: imx7-mba7: Deassert BOOT_EN after boot ARM: dts: tqma7: add boot phase properties ARM: dts: imx7s: add boot phase properties ARM: dts: tqma6ul[l]: correct spelling of TQ-Systems ARM: dts: mba6ulx: add boot phase properties ARM: dts: imx6ul[l]-tqma6ul[l]: add boot phase properties ARM: dts: imx6ul/imx6ull: add boot phase properties ARM: dts: imx6qdl-mba6: add boot phase properties ARM: dts: imx6qdl-tqma6: add boot phase properties ARM: dts: imx6qdl: add boot phase properties ... List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

b7e1557eb6ce7e71788b41e211ceb47b72c4850a - Merge tag 'qcom-arm64-for-7.1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Sat, 11 Apr 2026 10:36:04 +0200

Merge tag 'qcom-arm64-for-7.1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dtA few more Arm64 DeviceTree updates for v7.1Introduce the Hamoa-based Lenovo IdeaCentre Mini X, the DragonwingIQ-615 (Talos) EVK, and a Talos EVK camera overlay.Enable DisplayPort support on the Glymur CRD.Add WiFi, Bluetooh, LEDs, and venus on LG-based SDM845 devices. Addbattery, charger, and display on the LG G7 ThinQ.Enable SD-card, describe the audio amplifier, and increase the speed ofthe i2c clock for touchscreen on the SHIFT SHIFT6mq.Add camera subsystem, camera control interface, GPU, GMU, and GPUcooling on the Talos platform. Enable the GPU on the Ride board.* tag 'qcom-arm64-for-7.1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (31 commits) arm64: dts: qcom: Add the Lenovo IdeaCentre Mini X dt-bindings: arm: qcom: Document the Lenovo IdeaCentre Mini X arm64: dts: qcom: sdm845-shift-axolotl: Enable TFA9890 codec arm64: dts: qcom: sdm845-shift-axolotl: Set higher touchscreen i2c clock arm64: dts: qcom: sdm845-shift-axolotl: Enable sdcard arm64: dts: qcom: talos: Add clocks for QoS configuration arm64: dts: qcom: talos-evk-camera: Add DT overlay arm64: dts: qcom: talos: Add camera MCLK pinctrl arm64: dts: qcom: talos: Add CCI definitions arm64: dts: qcom: talos: Add camss node arm64: dts: qcom: talos: Add EL2 overlay arm64: dts: qcom: talos-evk: Add support for QCS615 talos evk board arm64: dts: qcom: talos/qcs615-ride: Fix inconsistent USB PHY node naming dt-bindings: arm: qcom: talos-evk: Add QCS615 Talos EVK SMARC platform arm64: dts: qcom: qcs615-ride: Enable Adreno 612 GPU arm64: dts: qcom: talos: Add GPU cooling arm64: dts: qcom: talos: Add gpu and rgmu nodes arm64: dts: qcom: talos: add the GPU SMMU node arm64: dts: qcom: sdm845-lg-common: Add chassis-type arm64: dts: qcom: sdm845-lg: Add wifi nodes ...Signed-off-by: Krzysztof Kozlowski List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

8366b60cbea2fbf4263e68da39dc848ea1793568 - Merge tag 'qcom-arm64-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Fri, 03 Apr 2026 00:08:34 +0200

Merge tag 'qcom-arm64-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dtQualcomm Arm64 DeviceTree updates for v7.1Introduce the Eliza, Glymur, Mahua, and IPQ5210 Qualcomm SoCs.Introduce the Redmi 4A, Redmi Go, Arduino Monza (VENTUNO Q), Redmi Note8T, Purwa EVK, ECS Liva QCS710, additional variants of the DB820c,Ayaneo Pocket S2, Thundercomm AI Mini PC G1, Samsung Galaxy Core PrimeLTE Verizon Wireless, Wiko Pulp 4G, the Purwa-variant of ASUS VivobookS15, the Eliza MTP, and the Glymur and Mahua CRDs.Introduce UFS support and flatten the DWC3 node on Hamoa. Enable UFS,SDC, DisplayPort audio playback, and an EL2 overlay for the Hamoa IoTEVK. Enable DisplayPort audio on the Hamoa CRD and add HDMI support onthe ASUS Zenbook A14. Reduce the duplication of thermal sensors acrossPurwa and Hamoa.Add the QPIC SPI NAND controller on IPQ5332 and IPQ9574. Describe andenable the eMMC controller on IPQ9574.Add display, audio/compute remoteprocs, QUP devices, thermal sensors,display, and CoreSight on the Kaanapali platform. Enable audio, computedisplay, PMIC, Bluetooth, and WiFi on the MTP. Describe PMIC, audio andcompute remoteprocs on QRD.Add role-switching support for the tertiary USB controller on Lemans.Enable the tertiary USB controller and the GPIO expander on the LemansEVK, and add an overlay for the IFP Mezzanine.Add UFS, camera control interface, audio GPR, and FastRPC support onMilos. Enable UFS, camera EEPROMs, and hall effect sensor on theFairphone FP6.Add camera control interface and fix a variety of things on the Monacoplatform, add missing FastRPC compute banks. Add eMMC support, describethe DisplayPort bridge and GPIO expander on the Monaco EVK. Add overlayfor EVK camera and the IFP mezzanine.Add touchscreen to the Xiaomi Redmi 4A, 5A, and Go, and fix the board-idon the 4A.Add the ambient light and proximity sensor on the Asus ZenFone 2Laser/Selfie.On Kodiak-based boards, enable the ethernet and USB Type-A ports on theRb3Gen2, correct the LT9611 routing on the RubikPi3, add Bluetooth onthe IDP, and add front camera support on the Fairphone FP5.Introduce an overlay for the Rb3Gen2 Industrial Mezzanine.Describe DSI on the Monaco SoC and enable Bluetooth, WiFi and DSI/DPbridge on the Ride board.Describe the WiFi/BT combo chip properly on the QRB2210 RB1 and QRB4210.The describe the DSI/DP bringde on the Arduino UnoQ.01022af2d218 arm64: dts: qcom: sc7280-chrome-common: disable VenusIntroduce DSI display support on SC8280XP.Add LLCC on SDM670 and another SPI controller on SDM630.Properly describe the WiFi/BT chip on a variety of SDM845-baseddevices. Introduce the "alert slider" on the OnePlus 6 and OnePlus 6Tdevices.Introduce the PRNG, describe the debug UART, and add the MDSS core reseton SM6125. Enable the debug UART and fix various issues on the XiaomiRedmi Note 8. Describe the touchscreen on the Xiaomi Mi A3.Properly describe the WiFi/BT combo chip in SM8150 HDK.Improve the EAS properties on SM8550, in addition to various otherfixes. Introduce a new overlay for the HDK display card.Introduce various smaller fixes across SM8450 and SM8650.Add display support on SM8750 and enable DSI and DisplayPort on the MTP.Also add tsens and thermal-zones.Add ETR devices, flatten the USB controller node, and mark USBcontrollers as wakeup-capable devices, on Talos.Properly describe the IPA IMEM slice on a variety of platforms.Drop redundant non-controllable regulator definitions from a variety ofboards.Drop redundant VSYNC pin state definition from various platforms.* tag 'qcom-arm64-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (254 commits) arm64: dts: qcom: sm8250: Add missing CPU7 3.09GHz OPP arm64: dts: qcom: sm8550-hdk: add support for the Display Card overlay arm64: dts: qcom: msm8916-samsung-coreprimeltevzw: add device tree dt-bindings: qcom: Document samsung,coreprimeltevzw arm64: dts: qcom: msm8916-samsung-fortuna: Move SM5504 from rossa and refactor MUIC arm64: dts: qcom: sdm670: add llcc arm64: dts: qcom: qcm6490-fairphone-fp5: Add front camera support arm64: dts: qcom: qcm6490-fairphone-fp5: Sort pinctrl nodes by pins arm64: dts: qcom: milos-fairphone-fp6: Add camera EEPROMs on CCI busses arm64: dts: qcom: milos: Add CCI busses arm64: dts: qcom: purwa-iot-evk: Enable UFS arm64: dts: qcom: eliza: Add thermal sensors arm64: dts: qcom: sc8280xp: Add dsi nodes on SC8280XP arm64: dts: qcom: sdm845-oneplus: Describe Wi-Fi/BT properly arm64: dts: qcom: sdm845-google: Describe Wi-Fi/BT properly arm64: dts: qcom: drop redundant zap-shader memory-region arm64: dts: qcom: fix remaining gpu_zap_shader labels arm64: dts: qcom: msm8996: fix indentation in sdhc2 node arm64: dts: qcom: monaco-evk: enable UART6 for robot expansion board arm64: dts: qcom: lemans-evk: enable UART0 for robot expansion board ...Signed-off-by: Arnd Bergmann List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

af241225893ac4933bb8f0615f2dfda8ea2326ce - arm64: dts: qcom: Add the Lenovo IdeaCentre Mini X

Thu, 02 Apr 2026 04:31:26 +0200

arm64: dts: qcom: Add the Lenovo IdeaCentre Mini XThe Lenovo IdeaCentre Mini X (Snapdragon) Desktop is a Hamoa-basedultracompact desktop PC. It provides HDMI, DisplayPort, USB Type-Cdisplay outputs, 5 additional USB ports, Ethernet, dual NVME slots,headphone jack, WiFi, and Bluetooth.Introduce a DeviceTree describing this device.Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20260401-ideacentre-v2-2-5745fe2c764e@oss.qualcomm.comSigned-off-by: Bjorn Andersson List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

594be93cdc9dcfec5d10882ed3fccce1e3af9015 - arm64: dts: qcom: talos-evk-camera: Add DT overlay

Thu, 05 Mar 2026 10:48:16 +0100

arm64: dts: qcom: talos-evk-camera: Add DT overlayEnable IMX577 via CCI on Talos EVK Core Kit.The Talos EVK board does not include a camera sensorby default. This DTSO has enabled the Arducam 12.3MPIMX577 Mini Camera Module on the CSI-1 interface.CSI-1 interface using mclk2 as the MCLK source on this board.Reviewed-by: Vladimir Zapolskiy Signed-off-by: Wenmeng Liu Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260305-sm6150_evk-v6-5-38ce4360d5e0@oss.qualcomm.comSigned-off-by: Bjorn Andersson List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

1bb533d644a2c56a3314351721445ea43fac9ff1 - arm64: dts: qcom: talos: Add EL2 overlay

Tue, 27 Jan 2026 12:43:50 +0100

arm64: dts: qcom: talos: Add EL2 overlayAll the existing variants Talos boards are using Gunyah hypervisorwhich means that, so far, Linux-based OS could only boot in EL1 onthose devices. However, it is possible for us to boot Linux at EL2on these devices [1].When running under Gunyah, the remote processor firmware IOMMU streamsare controlled by Gunyah. However, without Gunyah, the IOMMU is managedby the consumer of this DeviceTree. Therefore, describe the firmwarestreams for each remote processor.Add a EL2-specific DT overlay and apply it to Talos IOT variantdevices to create -el2.dtb for each of them alongside "normal" dtb.[1]https://docs.qualcomm.com/bundle/publicresource/topics/80-70020-4/boot-developer-touchpoints.html#uefiReviewed-by: Konrad Dybcio Signed-off-by: Mukesh Ojha Link: https://lore.kernel.org/r/20260127-talos-el2-overlay-v2-3-b6a2266532c4@oss.qualcomm.comSigned-off-by: Bjorn Andersson List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

0f9e6db8a2237e41209322017e2e9c45729d6d45 - arm64: dts: qcom: talos-evk: Add support for QCS615 talos evk board

Tue, 31 Mar 2026 08:01:07 +0200

arm64: dts: qcom: talos-evk: Add support for QCS615 talos evk boardAdd the device tree for the QCS615-based Talos EVK platform. Theplatform is composed of a System-on-Module following the SMARCstandard, and a Carrier Board.The Carrier Board supports several display configurations, HDMI andLVDS. Both configurations use the same base hardware, with the displayselection controlled by a DIP switch.Use a DTBO file, talos-evk-lvds-auo,g133han01.dtso, which defines anoverlay that disables HDMI and adds LVDS. The DTs file talos-evkcan describe the HDMI display configurations.According to the hardware design and vendor guidance, the WiFi PAsupplies VDD_PA_A and VDD_PA_B only need to be enabled at the same timeas asserting WLAN_EN.On this platform, WiFi enablement is controlled via the WLAN_EN GPIO(GPIO84), which also drives the VDD_PA_A and VDD_PA_B power enables.Remove the VDD_PA_A and VDD_PA_B regulator nodes from the device treeand rely on WLAN_EN to enable WiFi functionality.Add talos-evk-usb1-peripheral.dtso overlay to enable USB0 peripheral(EDL) mode. The base DTS will keep USB0 host-only due to hardwarerouting through the EDL DIP switch, and the overlay switches theconfiguration for device-mode operation.The LVDS backlight hardware has been updated to use a simplifieddesign. The backlight enable signal is now permanently pulled upto 3.3V and is no longer controlled via GPIO59.Remove the GPIO59 based backlight configuration from the devicetree, as it is no longer routed to the LVDS interface.The initial device tree includes support for:- CPU and memory- UART- GPIOs- Regulators- PMIC- Early console- AT24MAC602 EEPROM- MCP2515 SPI to CAN- ADV7535 DSI-to-HDMI bridge- DisplayPort interface- SN65DSI84ZXHR DSI-to-LVDS bridge- Wi-Fi/BTReviewed-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Signed-off-by: Sudarshan Shetty Link: https://lore.kernel.org/r/20260331060107.501561-4-tessolveupstream@gmail.comSigned-off-by: Bjorn Andersson List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

40c15162c873a481cb0e57f8aaa743a4bc66432f - arm64: dts: qcom: sm8550-hdk: add support for the Display Card overlay

Wed, 11 Mar 2026 01:12:38 +0100

arm64: dts: qcom: sm8550-hdk: add support for the Display Card overlayThe SM8550-HDK board may be connected to a Display Card external PCB,which is identical to the already supported SM8650-HDK Display Card,it provides a VTDR6130 display with Goodix Berlin Touch controller, seealso commit bc90f56a1699 ("arm64: dts: sm8650-hdk: add support for theDisplay Card overlay") for additional details.Two overlays are added to support SM8550-HDK plus Display Card andSM8550-HDK plus Display Card plus Rear Camera Card setups.Signed-off-by: Vladimir Zapolskiy Reviewed-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20260311001238.4191034-1-vladimir.zapolskiy@linaro.orgSigned-off-by: Bjorn Andersson List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

2ce450f77f1de5eb7b489fcd829a7f494952e1bf - arm64: dts: qcom: msm8916-samsung-coreprimeltevzw: add device tree

Mon, 23 Feb 2026 23:05:14 +0100

arm64: dts: qcom: msm8916-samsung-coreprimeltevzw: add device treeSamsung Galaxy Core Prime Verizon Wireless is a phone based on MSM8916.They are similar to the other Samsung devices based on MSM8916 with only afew minor differences.The device trees contain initial support with: - GPIO keys - Regulator haptic - SDHCI (internal and external storage) - USB Device Mode - UART (on USB connector via the SM5502 MUIC) - WCNSS (WiFi/BT) - Regulators - QDSP6 audio - Speaker/earpiece/headphones/microphones via digital/analog codec in MSM8916/PM8916 - WWAN Internet via BAM-DMUX - PMIC and charger - TouchscreenThere are different variants of Core Prime, with some differences inNFC and MUIC.The common parts are shared inmsm8916-samsung-fortuna-common.dtsi and msm8916-samsung-rossa-common.dtsito reduce duplication.Signed-off-by: Max McNamee [Raymond: Refactor touchscreen and MUIC. Add commit messages.]Signed-off-by: Raymond Hackley Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20260223220514.2556033-4-wonderfulshrinemaidenofparadise@postmarketos.orgSigned-off-by: Bjorn Andersson List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

4073cf900eb9adc71f13656abf2aa968147337cd - arm64: dts: qcom: add IPQ5210 SoC and rdp504 board support

Wed, 25 Mar 2026 10:19:10 +0100

arm64: dts: qcom: add IPQ5210 SoC and rdp504 board supportAdd initial device tree support for the Qualcomm IPQ5210 SoC andrdp504 board.Signed-off-by: Kathiravan Thirumoorthy Link: https://lore.kernel.org/r/20260325-ipq5210_boot_to_shell-v3-2-9c7360d19d10@oss.qualcomm.comSigned-off-by: Bjorn Andersson List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

b64abb26a2916e33cc9dcc00a48fa31fef255697 - arm64: dts: qcom: lemans-evk: Add IFP Mezzanine

Wed, 04 Mar 2026 17:59:25 +0100

arm64: dts: qcom: lemans-evk: Add IFP MezzanineThe Interface Plus [IFP] Mezzanine is an hardware expansion add-onboard designed to be stacked on top of Lemans EVK.It has following peripherals :- 4x Type A USB ports in host mode.- TC9563 PCIe switch, which has following three downstream ports (DSP) : - 1st DSP is routed to an M.2 E-key connector, intended for WLAN modules. - 2nd DSP is routed to an M.2 B-key connector, intended for cellular modems. - 3rd DSP with support for Dual Ethernet ports.- eMMC.- Additional 2.5GbE Ethernet PHY connected to native EMAC with support for MAC Address configuration via NVMEM.- EEPROM.- LVDS Display.- 2*mini DP.Add support for following peripherals :- TC9563 PCIe Switch.- Additional 2.5GbE Ethernet Port.- EEPROM.Enable support for USB hub, LVDS display and mini-DP later oncedependent changes are available in lemans-evk core-kit.Written with inputs from : Mohd Ayaan Anwar - Ethernet. Krishna Chaitanya Chundru - PCIe Monish Chunara - EEPROM.Signed-off-by: Umang Chheda Reviewed-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20260304165925.1535938-2-umang.chheda@oss.qualcomm.comSigned-off-by: Bjorn Andersson List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

5a67924d2fc5787d894bdbd8a87ad6794487060d - arm64: dts: qcom: monaco-evk: Add IFP Mezzanine

Tue, 03 Mar 2026 17:43:14 +0100

arm64: dts: qcom: monaco-evk: Add IFP MezzanineThe IFP Mezzanine is an hardware expansion add-on board designedto be stacked on top of Monaco EVK.It has following peripherals :- 4x Type A USB ports in host mode.- TC9563 PCIe switch, which has following three downstream ports (DSP) : - 1st DSP is routed to an M.2 E-Key connector, intended for WLAN modules. - 2nd DSP is routed to an M.2 B-key connector, intended for cellular modems. - 3rd DSP with support for Dual Ethernet ports.- EEPROM.- LVDS Display.- 2*mini DP.Add support for following peripherals :- TC9563 PCIe Switch.- EEPROM.Enable support for USB hub, LVDS display and mini-DP later once dependentchanges are available in monaco-evk core-kit.Written with inputs from : Krishna Chaitanya Chundru - PCIe Monish Chunara - EEPROM.Signed-off-by: Umang Chheda Reviewed-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260303164314.886733-2-umang.chheda@oss.qualcomm.comSigned-off-by: Bjorn Andersson List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

707c7592486ef62d736af1a135fadf478cf665fa - arm64: dts: qcom: Add Redmi Go

Sun, 15 Mar 2026 17:26:24 +0100

arm64: dts: qcom: Add Redmi GoRedmi Go (tiare) is like Redmi 5A with small differences like charging,fuel gauge and different speaker codec.Signed-off-by: Barnabás Czémán Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260315-riva-common-v3-6-897f130786ed@mainlining.orgSigned-off-by: Bjorn Andersson List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

fc24904b93e22757ba54215d174b17ec3d656522 - arm64: dts: qcom: Add Redmi 4A

Sun, 15 Mar 2026 17:26:23 +0100

arm64: dts: qcom: Add Redmi 4ARedmi 4A (rolex) is like Redmi 5A with small differences like charging,fuel gauge, different speaker codec configuration and display.Signed-off-by: Barnabás Czémán Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260315-riva-common-v3-5-897f130786ed@mainlining.orgSigned-off-by: Bjorn Andersson List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

df260487f33c8583bb78a28ef98b3b6c49265860 - arm64: dts: qcom: add basic devicetree for Ayaneo Pocket S2 gaming console

Thu, 19 Mar 2026 09:55:11 +0100

arm64: dts: qcom: add basic devicetree for Ayaneo Pocket S2 gaming consoleAdd initial Device Tree for the Ayaneo Pocket S2 gaming console basedon the Qualcomm Snapdragon 8 Gen 3 platform.The design is similar to a phone without the modem, the game controlis handled via a standalone controller connected to a PCIe USBcontroller.Display panel support will be added in a second time.Signed-off-by: KancyJoe Reviewed-by: Konrad Dybcio Reviewed-by: Bartosz Golaszewski Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20260319-topic-sm8650-ayaneo-pocket-s2-base-v6-5-797bf96df771@linaro.orgSigned-off-by: Bjorn Andersson List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

70e3a6120ef7d3943be4ab291031d0bf10a954ab - arm64: dts: qcom: Add Arduino Monza (VENTUNO Q) board support

Fri, 13 Mar 2026 11:38:21 +0100

arm64: dts: qcom: Add Arduino Monza (VENTUNO Q) board supportAdd device tree support for the Arduino VENTUNO Q board,based on the Qualcomm QCS8300 (Monaco) SoC.The board features a Qualcomm Monza SoM and integrates variousperipherals, including:- USB Type‑C connector with dual‑role support- ADV7535 DSI‑to‑HDMI bridge- MAX98091 audio codec- 2.5G Ethernet PHY (HSGMII)- PCIe0 (to onboard WiFi chipset and USB bridge)- PCIe1 (to M2/nvme)- Button (via GPIO‑keys)Signed-off-by: Loic Poulain Co-developed-by: Srinivas Kandagatla Signed-off-by: Srinivas Kandagatla Reviewed-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20260313103824.2634519-7-srinivas.kandagatla@oss.qualcomm.comSigned-off-by: Bjorn Andersson List of files: /linux/arch/arm64/boot/dts/qcom/Makefile

0b63fb8c3e085df3118192e688ed98b91cfc1c87 - arm64: dts: qcom: msm8916-wiko-chuppito: add initial devicetree

Wed, 11 Mar 2026 19:46:07 +0100

arm64: dts: qcom: msm8916-wiko-chuppito: add initial devicetreeAdd an initial device tree for Wiko PULP 4G.Includes support for:- UART- USB (no OTG)- Internal storage- MicroSD- Volume keys + Power button- Touchscreen- Backlight- Accelerometer: Invensense MPU6880- Magnetometer: Asahi Kasei AK09911- Hall sensor: Rohm BU52021HFV- Proximity sensor- Vibrator- Earpiece- Microphone 1- Headphones- Wifi- Bluetooth- GPUSigned-off-by: Paul Adam Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260311-wiko-chuppito-v5-3-0a8656cca1b3@posteo.deSigned-off-by: Bjorn Andersson List of files: /linux/arch/arm64/boot/dts/qcom/Makefile