en Copyright 2015 Java http://kernelsources.org:8080/source/history/freebsd/sys/modules/firewire/Makefile#23a6997e3071cea8d8fc5238792fdd0ad5b5dc9a fwdv: add AV/C DV capture driver for FireWire camcordersAdd fwdv(4) driver for DV video capture from FireWire camcordersusing AV/C protocol and isochronous streaming.Supports AV/C tape transport commands (play, stop, ff, rewind, pause,record, eject) with NTSC/PAL auto-detection and read(2) interfacefor frame capture.Reviewed by: adrianDifferential Revision: https://reviews.freebsd.org/D58122 List of files: /freebsd/sys/modules/firewire/Makefile Sun, 12 Jul 2026 17:25:52 +0200 Abdelkader Boudih <freebsd@seuros.com> http://kernelsources.org:8080/source/history/freebsd/sys/modules/firewire/Makefile#cd7b65080f2f2e038ddba42048f24f8e98b011f2 fwisound: add Apple FireWire audio driverExpose audio capture from Apple FireWire devices as a standardpcm(4)/dsp(4) device via the newpcm framework.(adrian: I've tested this on an isight camera and loopedit back to USB speakers via "sox -t oss /dev/dsp3 -t oss /dev/dsp4")Reviewed by: adrianDifferential Revision: https://reviews.freebsd.org/D58109 List of files: /freebsd/sys/modules/firewire/Makefile Thu, 09 Jul 2026 04:52:43 +0200 Abdelkader Boudih <freebsd@seuros.com> http://kernelsources.org:8080/source/history/freebsd/sys/modules/firewire/Makefile#40e05479718460820cd24c22e59519a4f13eba3d fwcam: add IIDC 1394 FireWire camera driverAdd fwcam(4), a driver for IIDC v1.30 (TA Document 1999023) digitalcameras over IEEE 1394.Supports Format_0 (VGA) video modes with isochronous receive DMA,feature control (brightness, exposure, gain, shutter, white balance,focus, etc.), poll/kqueue, and hot-plug via bus reset handling.Reviewed by: adrianDifferential Revision: https://reviews.freebsd.org/D57685 List of files: /freebsd/sys/modules/firewire/Makefile Thu, 25 Jun 2026 04:14:22 +0200 Abdelkader Boudih <freebsd@seuros.com> http://kernelsources.org:8080/source/history/freebsd/sys/modules/firewire/Makefile#e9ac41698b2f322d55ccf9da50a3596edb2c1800 Remove residual blank line at start of MakefileThis is a residual of the $FreeBSD$ removal.MFC After: 3 days (though I'll just run the command on the branches)Sponsored by: Netflix List of files: /freebsd/sys/modules/firewire/Makefile Mon, 15 Jul 2024 06:46:32 +0200 Warner Losh <imp@FreeBSD.org> http://kernelsources.org:8080/source/history/freebsd/sys/modules/firewire/Makefile#031beb4e239bfce798af17f5fe8dba8bcaf13d99 sys: Remove $FreeBSD$: one-line sh patternRemove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/ List of files: /freebsd/sys/modules/firewire/Makefile Wed, 16 Aug 2023 19:54:58 +0200 Warner Losh <imp@FreeBSD.org> http://kernelsources.org:8080/source/history/freebsd/sys/modules/firewire/Makefile#363eade1f1b277796ff66a32211c9af6be536668 Add fwip module. List of files: /freebsd/sys/modules/firewire/Makefile Mon, 12 Jul 2004 15:13:17 +0200 Doug Rabson <dfr@FreeBSD.org> http://kernelsources.org:8080/source/history/freebsd/sys/modules/firewire/Makefile#9cf7b160387f2553357e394223fab9f172f72b38 Normalize SUBDIR. List of files: /freebsd/sys/modules/firewire/Makefile Mon, 19 Jan 2004 13:36:08 +0100 Ruslan Ermilov <ru@FreeBSD.org> http://kernelsources.org:8080/source/history/freebsd/sys/modules/firewire/Makefile#e9e688e24362baf97f9383904c7323b6fe94f5ef Add SBP-II target mode driver.Though this is still incomplete and has some missing features such asexclusive login and event notification, it may be enough for someonewho wants to play with it.This driver is supposed to work with firewire(4), targ(4) of CAM(4)and scsi_target(8) which can be found in /usr/share/example/scsi_target.This driver doesn't require sbp(4) which implements initiator mode.Sample configuration:Kernel: (you can use modules as well)device firewiredevice scbusdevice targdevice sbp_targAfter reboot:# mdconfig -a -t malloc -s 10mmd0# scsi_target 0:0:0 /dev/md0(Assuming sbp_targ0 on scbus0)You should find the 10MB HDD on FreeBSD/MacOS X/WinXP or whatever connectedto the target using FireWire.Manpage is not finished yet. List of files: /freebsd/sys/modules/firewire/Makefile Sat, 18 Oct 2003 07:41:31 +0200 Hidetoshi Shimokawa <simokawa@FreeBSD.org> http://kernelsources.org:8080/source/history/freebsd/sys/modules/firewire/Makefile#3592796a98fd8e2e492fd5289886ef29579e770b Enable if_fwe. List of files: /freebsd/sys/modules/firewire/Makefile Sun, 03 Nov 2002 11:41:30 +0100 Hidetoshi Shimokawa <simokawa@FreeBSD.org> http://kernelsources.org:8080/source/history/freebsd/sys/modules/firewire/Makefile#3c60ba66c4479fdf0045acf25f21c6806fd06c0f Initial import for IEEE1394 OHCI chipdet device driver and SBP-2 (SerialBus Protocol 2:SCSI over IEEE1394) support for CAM. List of files: /freebsd/sys/modules/firewire/Makefile Fri, 13 Sep 2002 14:31:56 +0200 Katsushi Kobayashi <ikob@FreeBSD.org> http://kernelsources.org:8080/source/history/freebsd/sys/modules/firewire/Makefile#363eade1f1b277796ff66a32211c9af6be536668 Add fwip module. List of files: /freebsd/sys/modules/firewire/Makefile Mon, 12 Jul 2004 15:13:17 +0200 Doug Rabson <dfr@FreeBSD.org> http://kernelsources.org:8080/source/history/freebsd/sys/modules/firewire/Makefile#9cf7b160387f2553357e394223fab9f172f72b38 Normalize SUBDIR. List of files: /freebsd/sys/modules/firewire/Makefile Mon, 19 Jan 2004 13:36:08 +0100 Ruslan Ermilov <ru@FreeBSD.org> http://kernelsources.org:8080/source/history/freebsd/sys/modules/firewire/Makefile#e9e688e24362baf97f9383904c7323b6fe94f5ef Add SBP-II target mode driver.Though this is still incomplete and has some missing features such asexclusive login and event notification, it may be enough for someonewho wants to play with it.This driver is supposed to work with firewire(4), targ(4) of CAM(4)and scsi_target(8) which can be found in /usr/share/example/scsi_target.This driver doesn't require sbp(4) which implements initiator mode.Sample configuration:Kernel: (you can use modules as well)device firewiredevice scbusdevice targdevice sbp_targAfter reboot:# mdconfig -a -t malloc -s 10mmd0# scsi_target 0:0:0 /dev/md0(Assuming sbp_targ0 on scbus0)You should find the 10MB HDD on FreeBSD/MacOS X/WinXP or whatever connectedto the target using FireWire.Manpage is not finished yet. List of files: /freebsd/sys/modules/firewire/Makefile Sat, 18 Oct 2003 07:41:31 +0200 Hidetoshi Shimokawa <simokawa@FreeBSD.org> http://kernelsources.org:8080/source/history/freebsd/sys/modules/firewire/Makefile#3592796a98fd8e2e492fd5289886ef29579e770b Enable if_fwe. List of files: /freebsd/sys/modules/firewire/Makefile Sun, 03 Nov 2002 11:41:30 +0100 Hidetoshi Shimokawa <simokawa@FreeBSD.org> http://kernelsources.org:8080/source/history/freebsd/sys/modules/firewire/Makefile#3c60ba66c4479fdf0045acf25f21c6806fd06c0f Initial import for IEEE1394 OHCI chipdet device driver and SBP-2 (SerialBus Protocol 2:SCSI over IEEE1394) support for CAM. List of files: /freebsd/sys/modules/firewire/Makefile Fri, 13 Sep 2002 14:31:56 +0200 Katsushi Kobayashi <ikob@FreeBSD.org>