/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef TRAPTRACE #include #endif int tudebug = 0; static int tudebugbpt = 0; static int tudebugfpe = 0; static int alignfaults = 0; #if defined(TRAPDEBUG) || defined(lint) static int lodebug = 0; #else #define lodebug 0 #endif /* defined(TRAPDEBUG) || defined(lint) */ int vis1_partial_support(struct regs *rp, k_siginfo_t *siginfo, uint_t *fault); #pragma weak vis1_partial_support void showregs(unsigned, struct regs *, caddr_t, uint_t); #pragma weak showregs void trap_async_hwerr(void); #pragma weak trap_async_hwerr void trap_async_berr_bto(int, struct regs *); #pragma weak trap_async_berr_bto static enum seg_rw get_accesstype(struct regs *); static int nfload(struct regs *, int *); static int swap_nc(struct regs *, int); static int ldstub_nc(struct regs *, int); void trap_cleanup(struct regs *, uint_t, k_siginfo_t *, int); void trap_rtt(void); static int die(unsigned type, struct regs *rp, caddr_t addr, uint_t mmu_fsr) { struct trap_info ti; #ifdef TRAPTRACE TRAPTRACE_FREEZE; #endif ti.trap_regs = rp; ti.trap_type = type; ti.trap_addr = addr; ti.trap_mmu_fsr = mmu_fsr; curthread->t_panic_trap = &ti; if (type == T_DATA_MMU_MISS && addr < (caddr_t)KERNELBASE) { panic("BAD TRAP: type=%x rp=%p addr=%p mmu_fsr=%x " "occurred in module \"%s\" due to %s", type, (void *)rp, (void *)addr, mmu_fsr, mod_containing_pc((caddr_t)rp->r_pc), addr < (caddr_t)PAGESIZE ? "a NULL pointer dereference" : "an illegal access to a user address"); } else { panic("BAD TRAP: type=%x rp=%p addr=%p mmu_fsr=%x", type, (void *)rp, (void *)addr, mmu_fsr); } return (0); /* avoid optimization of restore in call's delay slot */ } #if defined(SF_ERRATA_23) || defined(SF_ERRATA_30) /* call ... illegal-insn */ int ill_calls; #endif /* * Currently, the only PREFETCH/PREFETCHA instructions which cause traps * are the "strong" prefetches (fcn=20-23). But we check for all flavors of * PREFETCH, in case some future variant also causes a DATA_MMU_MISS. */ #define IS_PREFETCH(i) (((i) & 0xc1780000) == 0xc1680000) #define IS_FLUSH(i) (((i) & 0xc1f80000) == 0x81d80000) #define IS_SWAP(i) (((i) & 0xc1f80000) == 0xc0780000) #define IS_LDSTUB(i) (((i) & 0xc1f80000) == 0xc0680000) #define IS_FLOAT(i) (((i) & 0x1000000) != 0) #define IS_STORE(i) (((i) >> 21) & 1) /* * Called from the trap handler when a processor trap occurs. */ /*VARARGS2*/ void trap(struct regs *rp, caddr_t addr, uint32_t type, uint32_t mmu_fsr) { proc_t *p = ttoproc(curthread); klwp_id_t lwp = ttolwp(curthread); struct machpcb *mpcb = NULL; k_siginfo_t siginfo; uint_t op3, fault = 0; int stepped = 0; greg_t oldpc; int mstate; char *badaddr; faultcode_t res; enum fault_type fault_type; enum seg_rw rw; uintptr_t lofault; int instr; int iskernel; int watchcode; int watchpage; extern faultcode_t pagefault(caddr_t, enum fault_type, enum seg_rw, int); CPU_STATS_ADDQ(CPU, sys, trap, 1); #ifdef SF_ERRATA_23 /* call causes illegal-insn */ ASSERT((curthread->t_schedflag & TS_DONT_SWAP) || (type == T_UNIMP_INSTR)); #else ASSERT(curthread->t_schedflag & TS_DONT_SWAP); #endif /* SF_ERRATA_23 */ if (USERMODE(rp->r_tstate) || (type & T_USER)) { /* * Set lwp_state before trying to acquire any * adaptive lock */ ASSERT(lwp != NULL); lwp->lwp_state = LWP_SYS; /* * Set up the current cred to use during this trap. u_cred * no longer exists. t_cred is used instead. * The current process credential applies to the thread for * the entire trap. If trapping from the kernel, this * should already be set up. */ if (curthread->t_cred != p->p_cred) { cred_t *oldcred = curthread->t_cred; /* * DTrace accesses t_cred in probe context. t_cred * must always be either NULL, or point to a valid, * allocated cred structure. */ curthread->t_cred = crgetcred(); crfree(oldcred); } type |= T_USER; ASSERT((type == (T_SYS_RTT_PAGE | T_USER)) || (type == (T_SYS_RTT_ALIGN | T_USER)) || lwp->lwp_regs == rp); mpcb = lwptompcb(lwp); switch (type) { case T_WIN_OVERFLOW + T_USER: case T_WIN_UNDERFLOW + T_USER: case T_SYS_RTT_PAGE + T_USER: case T_DATA_MMU_MISS + T_USER: mstate = LMS_DFAULT; break; case T_INSTR_MMU_MISS + T_USER: mstate = LMS_TFAULT; break; default: mstate = LMS_TRAP; break; } /* Kernel probe */ TNF_PROBE_1(thread_state, "thread", /* CSTYLED */, tnf_microstate, state, (char)mstate); mstate = new_mstate(curthread, mstate); siginfo.si_signo = 0; stepped = lwp->lwp_pcb.pcb_step != STEP_NONE && ((oldpc = rp->r_pc), prundostep()) && mmu_btop((uintptr_t)addr) == mmu_btop((uintptr_t)oldpc); /* this assignment must not precede call to prundostep() */ oldpc = rp->r_pc; } TRACE_1(TR_FAC_TRAP, TR_C_TRAP_HANDLER_ENTER, "C_trap_handler_enter:type %x", type); #ifdef F_DEFERRED /* * Take any pending floating point exceptions now. * If the floating point unit has an exception to handle, * just return to user-level to let the signal handler run. * The instruction that got us to trap() will be reexecuted on * return from the signal handler and we will trap to here again. * This is necessary to disambiguate simultaneous traps which * happen when a floating-point exception is pending and a * machine fault is incurred. */ if (type & USER) { /* * FP_TRAPPED is set only by sendsig() when it copies * out the floating-point queue for the signal handler. * It is set there so we can test it here and in syscall(). */ mpcb->mpcb_flags &= ~FP_TRAPPED; syncfpu(); if (mpcb->mpcb_flags & FP_TRAPPED) { /* * trap() has have been called recursively and may * have stopped the process, so do single step * support for /proc. */ mpcb->mpcb_flags &= ~FP_TRAPPED; goto out; } } #endif switch (type) { case T_DATA_MMU_MISS: case T_INSTR_MMU_MISS + T_USER: case T_DATA_MMU_MISS + T_USER: case T_DATA_PROT + T_USER: case T_AST + T_USER: case T_SYS_RTT_PAGE + T_USER: case T_FLUSH_PCB + T_USER: case T_FLUSHW + T_USER: break; default: FTRACE_3("trap(): type=0x%lx, regs=0x%lx, addr=0x%lx", (ulong_t)type, (ulong_t)rp, (ulong_t)addr); break; } switch (type) { default: /* * Check for user software trap. */ if (type & T_USER) { if (tudebug) showregs(type, rp, (caddr_t)0, 0); if ((type & ~T_USER) >= T_SOFTWARE_TRAP) { bzero(&siginfo, sizeof (siginfo)); siginfo.si_signo = SIGILL; siginfo.si_code = ILL_ILLTRP; siginfo.si_addr = (caddr_t)rp->r_pc; siginfo.si_trapno = type &~ T_USER; fault = FLTILL; break; } } addr = (caddr_t)rp->r_pc; (void) die(type, rp, addr, 0); /*NOTREACHED*/ case T_ALIGNMENT: /* supv alignment error */ if (nfload(rp, NULL)) goto cleanup; if (curthread->t_lofault) { if (lodebug) { showregs(type, rp, addr, 0); traceback((caddr_t)rp->r_sp); } rp->r_g1 = EFAULT; rp->r_pc = curthread->t_lofault; rp->r_npc = rp->r_pc + 4; goto cleanup; } (void) die(type, rp, addr, 0); /*NOTREACHED*/ case T_INSTR_EXCEPTION: /* sys instruction access exception */ addr = (caddr_t)rp->r_pc; (void) die(type, rp, addr, mmu_fsr); /*NOTREACHED*/ case T_INSTR_MMU_MISS: /* sys instruction mmu miss */ addr = (caddr_t)rp->r_pc; (void) die(type, rp, addr, 0); /*NOTREACHED*/ case T_DATA_EXCEPTION: /* system data access exception */ switch (X_FAULT_TYPE(mmu_fsr)) { case FT_RANGE: /* * This happens when we attempt to dereference an * address in the address hole. If t_ontrap is set, * then break and fall through to T_DATA_MMU_MISS / * T_DATA_PROT case below. If lofault is set, then * honour it (perhaps the user gave us a bogus * address in the hole to copyin from or copyout to?) */ if (curthread->t_ontrap != NULL) break; addr = (caddr_t)((uintptr_t)addr & TAGACC_VADDR_MASK); if (curthread->t_lofault) { if (lodebug) { showregs(type, rp, addr, 0); traceback((caddr_t)rp->r_sp); } rp->r_g1 = EFAULT; rp->r_pc = curthread->t_lofault; rp->r_npc = rp->r_pc + 4; goto cleanup; } (void) die(type, rp, addr, mmu_fsr); /*NOTREACHED*/ case FT_PRIV: /* * This can happen if we access ASI_USER from a kernel * thread. To support pxfs, we need to honor lofault if * we're doing a copyin/copyout from a kernel thread. */ if (nfload(rp, NULL)) goto cleanup; addr = (caddr_t)((uintptr_t)addr & TAGACC_VADDR_MASK); if (curthread->t_lofault) { if (lodebug) { showregs(type, rp, addr, 0); traceback((caddr_t)rp->r_sp); } rp->r_g1 = EFAULT; rp->r_pc = curthread->t_lofault; rp->r_npc = rp->r_pc + 4; goto cleanup; } (void) die(type, rp, addr, mmu_fsr); /*NOTREACHED*/ default: if (nfload(rp, NULL)) goto cleanup; addr = (caddr_t)((uintptr_t)addr & TAGACC_VADDR_MASK); (void) die(type, rp, addr, mmu_fsr); /*NOTREACHED*/ case FT_NFO: break; } /* fall into ... */ case T_DATA_MMU_MISS: /* system data mmu miss */ case T_DATA_PROT: /* system data protection fault */ if (nfload(rp, &instr)) goto cleanup; /* * If we're under on_trap() protection (see ), * set ot_trap and return from the trap to the trampoline. */ if (curthread->t_ontrap != NULL) { on_trap_data_t *otp = curthread->t_ontrap; TRACE_0(TR_FAC_TRAP, TR_C_TRAP_HANDLER_EXIT, "C_trap_handler_exit"); TRACE_0(TR_FAC_TRAP, TR_TRAP_END, "trap_end"); if (otp->ot_prot & OT_DATA_ACCESS) { otp->ot_trap |= OT_DATA_ACCESS; rp->r_pc = otp->ot_trampoline; rp->r_npc = rp->r_pc + 4; goto cleanup; } } lofault = curthread->t_lofault; curthread->t_lofault = 0; mstate = new_mstate(curthread, LMS_KFAULT); switch (type) { case T_DATA_PROT: fault_type = F_PROT; rw = S_WRITE; break; case T_INSTR_MMU_MISS: fault_type = F_INVAL; rw = S_EXEC; break; case T_DATA_MMU_MISS: case T_DATA_EXCEPTION: /* * The hardware doesn't update the sfsr on mmu * misses so it is not easy to find out whether * the access was a read or a write so we need * to decode the actual instruction. */ fault_type = F_INVAL; rw = get_accesstype(rp); break; default: cmn_err(CE_PANIC, "trap: unknown type %x", type); break; } /* * We determine if access was done to kernel or user * address space. The addr passed into trap is really the * tag access register. */ iskernel = (((uintptr_t)addr & TAGACC_CTX_MASK) == KCONTEXT); addr = (caddr_t)((uintptr_t)addr & TAGACC_VADDR_MASK); res = pagefault(addr, fault_type, rw, iskernel); if (!iskernel && res == FC_NOMAP && addr < p->p_usrstack && grow(addr)) res = 0; (void) new_mstate(curthread, mstate); /* * Restore lofault. If we resolved the fault, exit. * If we didn't and lofault wasn't set, die. */ curthread->t_lofault = lofault; if (res == 0) goto cleanup; if (IS_PREFETCH(instr)) { /* skip prefetch instructions in kernel-land */ rp->r_pc = rp->r_npc; rp->r_npc += 4; goto cleanup; } if ((lofault == 0 || lodebug) && (calc_memaddr(rp, &badaddr) == SIMU_SUCCESS)) addr = badaddr; if (lofault == 0) (void) die(type, rp, addr, 0); /* * Cannot resolve fault. Return to lofault. */ if (lodebug) { showregs(type, rp, addr, 0); traceback((caddr_t)rp->r_sp); } if (FC_CODE(res) == FC_OBJERR) res = FC_ERRNO(res); else res = EFAULT; rp->r_g1 = res; rp->r_pc = curthread->t_lofault; rp->r_npc = curthread->t_lofault + 4; goto cleanup; case T_INSTR_EXCEPTION + T_USER: /* user insn access exception */ bzero(&siginfo, sizeof (siginfo)); siginfo.si_addr = (caddr_t)rp->r_pc; siginfo.si_signo = SIGSEGV; siginfo.si_code = X_FAULT_TYPE(mmu_fsr) == FT_PRIV ? SEGV_ACCERR : SEGV_MAPERR; fault = FLTBOUNDS; break; case T_WIN_OVERFLOW + T_USER: /* window overflow in ??? */ case T_WIN_UNDERFLOW + T_USER: /* window underflow in ??? */ case T_SYS_RTT_PAGE + T_USER: /* window underflow in user_rtt */ case T_INSTR_MMU_MISS + T_USER: /* user instruction mmu miss */ case T_DATA_MMU_MISS + T_USER: /* user data mmu miss */ case T_DATA_PROT + T_USER: /* user data protection fault */ switch (type) { case T_INSTR_MMU_MISS + T_USER: addr = (caddr_t)rp->r_pc; fault_type = F_INVAL; rw = S_EXEC; break; case T_DATA_MMU_MISS + T_USER: addr = (caddr_t)((uintptr_t)addr & TAGACC_VADDR_MASK); fault_type = F_INVAL; /* * The hardware doesn't update the sfsr on mmu misses * so it is not easy to find out whether the access * was a read or a write so we need to decode the * actual instruction. XXX BUGLY HW */ rw = get_accesstype(rp); break; case T_DATA_PROT + T_USER: addr = (caddr_t)((uintptr_t)addr & TAGACC_VADDR_MASK); fault_type = F_PROT; rw = S_WRITE; break; case T_WIN_OVERFLOW + T_USER: addr = (caddr_t)((uintptr_t)addr & TAGACC_VADDR_MASK); fault_type = F_INVAL; rw = S_WRITE; break; case T_WIN_UNDERFLOW + T_USER: case T_SYS_RTT_PAGE + T_USER: addr = (caddr_t)((uintptr_t)addr & TAGACC_VADDR_MASK); fault_type = F_INVAL; rw = S_READ; break; default: cmn_err(CE_PANIC, "trap: unknown type %x", type); break; } /* * If we are single stepping do not call pagefault */ if (stepped) { res = FC_NOMAP; } else { caddr_t vaddr = addr; size_t sz; int ta; ASSERT(!(curthread->t_flag & T_WATCHPT)); watchpage = (pr_watch_active(p) && type != T_WIN_OVERFLOW + T_USER && type != T_WIN_UNDERFLOW + T_USER && type != T_SYS_RTT_PAGE + T_USER && pr_is_watchpage(addr, rw)); if (!watchpage || (sz = instr_size(rp, &vaddr, rw)) <= 0) /* EMPTY */; else if ((watchcode = pr_is_watchpoint(&vaddr, &ta, sz, NULL, rw)) != 0) { if (ta) { do_watch_step(vaddr, sz, rw, watchcode, rp->r_pc); fault_type = F_INVAL; } else { bzero(&siginfo, sizeof (siginfo)); siginfo.si_signo = SIGTRAP; siginfo.si_code = watchcode; siginfo.si_addr = vaddr; siginfo.si_trapafter = 0; siginfo.si_pc = (caddr_t)rp->r_pc; fault = FLTWATCH; break; } } else { if (rw != S_EXEC && pr_watch_emul(rp, vaddr, rw)) goto out; do_watch_step(vaddr, sz, rw, 0, 0); fault_type = F_INVAL; } if (pr_watch_active(p) && (type == T_WIN_OVERFLOW + T_USER || type == T_WIN_UNDERFLOW + T_USER || type == T_SYS_RTT_PAGE + T_USER)) { int dotwo = (type == T_WIN_UNDERFLOW + T_USER); if (copy_return_window(dotwo)) goto out; fault_type = F_INVAL; } res = pagefault(addr, fault_type, rw, 0); /* * If pagefault succeed, ok. * Otherwise grow the stack automatically. */ if (res == 0 || (res == FC_NOMAP && type != T_INSTR_MMU_MISS + T_USER && addr < p->p_usrstack && grow(addr))) { int ismem = prismember(&p->p_fltmask, FLTPAGE); /* * instr_size() is used to get the exact * address of the fault, instead of the * page of the fault. Unfortunately it is * very slow, and this is an important * code path. Don't call it unless * correctness is needed. ie. if FLTPAGE * is set, or we're profiling. */ if (curthread->t_rprof != NULL || ismem) (void) instr_size(rp, &addr, rw); lwp->lwp_lastfault = FLTPAGE; lwp->lwp_lastfaddr = addr; if (ismem) { bzero(&siginfo, sizeof (siginfo)); siginfo.si_addr = addr; (void) stop_on_fault(FLTPAGE, &siginfo); } goto out; } if (type != (T_INSTR_MMU_MISS + T_USER)) { /* * check for non-faulting loads, also * fetch the instruction to check for * flush */ if (nfload(rp, &instr)) goto out; /* skip userland prefetch instructions */ if (IS_PREFETCH(instr)) { rp->r_pc = rp->r_npc; rp->r_npc += 4; goto out; /*NOTREACHED*/ } /* * check if the instruction was a * flush. ABI allows users to specify * an illegal address on the flush * instruction so we simply return in * this case. * * NB: the hardware should set a bit * indicating this trap was caused by * a flush instruction. Instruction * decoding is bugly! */ if (IS_FLUSH(instr)) { /* skip the flush instruction */ rp->r_pc = rp->r_npc; rp->r_npc += 4; goto out; /*NOTREACHED*/ } } else if (res == FC_PROT) { report_stack_exec(p, addr); } if (tudebug) showregs(type, rp, addr, 0); } /* * In the case where both pagefault and grow fail, * set the code to the value provided by pagefault. */ (void) instr_size(rp, &addr, rw); bzero(&siginfo, sizeof (siginfo)); siginfo.si_addr = addr; if (FC_CODE(res) == FC_OBJERR) { siginfo.si_errno = FC_ERRNO(res); if (siginfo.si_errno != EINTR) { siginfo.si_signo = SIGBUS; siginfo.si_code = BUS_OBJERR; fault = FLTACCESS; } } else { /* FC_NOMAP || FC_PROT */ siginfo.si_signo = SIGSEGV; siginfo.si_code = (res == FC_NOMAP) ? SEGV_MAPERR : SEGV_ACCERR; fault = FLTBOUNDS; } /* * If this is the culmination of a single-step, * reset the addr, code, signal and fault to * indicate a hardware trace trap. */ if (stepped) { pcb_t *pcb = &lwp->lwp_pcb; siginfo.si_signo = 0; fault = 0; if (pcb->pcb_step == STEP_WASACTIVE) { pcb->pcb_step = STEP_NONE; pcb->pcb_tracepc = NULL; oldpc = rp->r_pc - 4; } /* * If both NORMAL_STEP and WATCH_STEP are in * effect, give precedence to WATCH_STEP. * One or the other must be set at this point. */ ASSERT(pcb->pcb_flags & (NORMAL_STEP|WATCH_STEP)); if ((fault = undo_watch_step(&siginfo)) == 0 && (pcb->pcb_flags & NORMAL_STEP)) { siginfo.si_signo = SIGTRAP; siginfo.si_code = TRAP_TRACE; siginfo.si_addr = (caddr_t)rp->r_pc; fault = FLTTRACE; } pcb->pcb_flags &= ~(NORMAL_STEP|WATCH_STEP); } break; case T_DATA_EXCEPTION + T_USER: /* user data access exception */ if (&vis1_partial_support != NULL) { bzero(&siginfo, sizeof (siginfo)); if (vis1_partial_support(rp, &siginfo, &fault) == 0) goto out; } if (nfload(rp, &instr)) goto out; if (IS_FLUSH(instr)) { /* skip the flush instruction */ rp->r_pc = rp->r_npc; rp->r_npc += 4; goto out; /*NOTREACHED*/ } bzero(&siginfo, sizeof (siginfo)); siginfo.si_addr = addr; switch (X_FAULT_TYPE(mmu_fsr)) { case FT_ATOMIC_NC: if ((IS_SWAP(instr) && swap_nc(rp, instr)) || (IS_LDSTUB(instr) && ldstub_nc(rp, instr))) { /* skip the atomic */ rp->r_pc = rp->r_npc; rp->r_npc += 4; goto out; } /* fall into ... */ case FT_PRIV: siginfo.si_signo = SIGSEGV; siginfo.si_code = SEGV_ACCERR; fault = FLTBOUNDS; break; case FT_SPEC_LD: case FT_ILL_ALT: siginfo.si_signo = SIGILL; siginfo.si_code = ILL_ILLADR; fault = FLTILL; break; default: siginfo.si_signo = SIGSEGV; siginfo.si_code = SEGV_MAPERR; fault = FLTBOUNDS; break; } break; case T_SYS_RTT_ALIGN + T_USER: /* user alignment error */ case T_ALIGNMENT + T_USER: /* user alignment error */ if (tudebug) showregs(type, rp, addr, 0); /* * If the user has to do unaligned references * the ugly stuff gets done here. */ alignfaults++; if (&vis1_partial_support != NULL) { bzero(&siginfo, sizeof (siginfo)); if (vis1_partial_support(rp, &siginfo, &fault) == 0) goto out; } bzero(&siginfo, sizeof (siginfo)); if (type == T_SYS_RTT_ALIGN + T_USER) { if (nfload(rp, NULL)) goto out; /* * Can't do unaligned stack access */ siginfo.si_signo = SIGBUS; siginfo.si_code = BUS_ADRALN; siginfo.si_addr = addr; fault = FLTACCESS; break; } /* * Try to fix alignment before non-faulting load test. */ if (p->p_fixalignment) { if (do_unaligned(rp, &badaddr) == SIMU_SUCCESS) { rp->r_pc = rp->r_npc; rp->r_npc += 4; goto out; } if (nfload(rp, NULL)) goto out; siginfo.si_signo = SIGSEGV; siginfo.si_code = SEGV_MAPERR; siginfo.si_addr = badaddr; fault = FLTBOUNDS; } else { if (nfload(rp, NULL)) goto out; siginfo.si_signo = SIGBUS; siginfo.si_code = BUS_ADRALN; if (rp->r_pc & 3) { /* offending address, if pc */ siginfo.si_addr = (caddr_t)rp->r_pc; } else { if (calc_memaddr(rp, &badaddr) == SIMU_UNALIGN) siginfo.si_addr = badaddr; else siginfo.si_addr = (caddr_t)rp->r_pc; } fault = FLTACCESS; } break; case T_PRIV_INSTR + T_USER: /* privileged instruction fault */ if (tudebug) showregs(type, rp, (caddr_t)0, 0); bzero(&siginfo, sizeof (siginfo)); siginfo.si_signo = SIGILL; siginfo.si_code = ILL_PRVOPC; siginfo.si_addr = (caddr_t)rp->r_pc; fault = FLTILL; break; case T_UNIMP_INSTR: /* priv illegal instruction fault */ if (fpras_implemented) { /* * Call fpras_chktrap indicating that * we've come from a trap handler and pass * the regs. That function may choose to panic * (in which case it won't return) or it may * determine that a reboot is desired. In the * latter case it must alter pc/npc to skip * the illegal instruction and continue at * a controlled address. */ if (&fpras_chktrap) { if (fpras_chktrap(rp)) goto cleanup; } } #if defined(SF_ERRATA_23) || defined(SF_ERRATA_30) /* call ... illegal-insn */ instr = *(int *)rp->r_pc; if ((instr & 0xc0000000) == 0x40000000) { long pc; rp->r_o7 = (long long)rp->r_pc; pc = rp->r_pc + ((instr & 0x3fffffff) << 2); rp->r_pc = rp->r_npc; rp->r_npc = pc; ill_calls++; goto cleanup; } #endif /* SF_ERRATA_23 || SF_ERRATA_30 */ /* * It's not an fpras failure and it's not SF_ERRATA_23 - die */ addr = (caddr_t)rp->r_pc; (void) die(type, rp, addr, 0); /*NOTREACHED*/ case T_UNIMP_INSTR + T_USER: /* illegal instruction fault */ #if defined(SF_ERRATA_23) || defined(SF_ERRATA_30) /* call ... illegal-insn */ instr = fetch_user_instr((caddr_t)rp->r_pc); if ((instr & 0xc0000000) == 0x40000000) { long pc; rp->r_o7 = (long long)rp->r_pc; pc = rp->r_pc + ((instr & 0x3fffffff) << 2); rp->r_pc = rp->r_npc; rp->r_npc = pc; ill_calls++; goto out; } #endif /* SF_ERRATA_23 || SF_ERRATA_30 */ if (tudebug) showregs(type, rp, (caddr_t)0, 0); bzero(&siginfo, sizeof (siginfo)); /* * Try to simulate the instruction. */ switch (simulate_unimp(rp, &badaddr)) { case SIMU_RETRY: goto out; /* regs are already set up */ /*NOTREACHED*/ case SIMU_SUCCESS: /* skip the successfully simulated instruction */ rp->r_pc = rp->r_npc; rp->r_npc += 4; goto out; /*NOTREACHED*/ case SIMU_FAULT: siginfo.si_signo = SIGSEGV; siginfo.si_code = SEGV_MAPERR; siginfo.si_addr = badaddr; fault = FLTBOUNDS; break; case SIMU_DZERO: siginfo.si_signo = SIGFPE; siginfo.si_code = FPE_INTDIV; siginfo.si_addr = (caddr_t)rp->r_pc; fault = FLTIZDIV; break; case SIMU_UNALIGN: siginfo.si_signo = SIGBUS; siginfo.si_code = BUS_ADRALN; siginfo.si_addr = badaddr; fault = FLTACCESS; break; case SIMU_ILLEGAL: default: siginfo.si_signo = SIGILL; op3 = (instr >> 19) & 0x3F; if ((IS_FLOAT(instr) && (op3 == IOP_V8_STQFA) || (op3 == IOP_V8_STDFA))) siginfo.si_code = ILL_ILLADR; else siginfo.si_code = ILL_ILLOPC; siginfo.si_addr = (caddr_t)rp->r_pc; fault = FLTILL; break; } break; case T_UNIMP_LDD + T_USER: case T_UNIMP_STD + T_USER: if (tudebug) showregs(type, rp, (caddr_t)0, 0); switch (simulate_lddstd(rp, &badaddr)) { case SIMU_SUCCESS: /* skip the successfully simulated instruction */ rp->r_pc = rp->r_npc; rp->r_npc += 4; goto out; /*NOTREACHED*/ case SIMU_FAULT: if (nfload(rp, NULL)) goto out; siginfo.si_signo = SIGSEGV; siginfo.si_code = SEGV_MAPERR; siginfo.si_addr = badaddr; fault = FLTBOUNDS; break; case SIMU_UNALIGN: if (nfload(rp, NULL)) goto out; siginfo.si_signo = SIGBUS; siginfo.si_code = BUS_ADRALN; siginfo.si_addr = badaddr; fault = FLTACCESS; break; case SIMU_ILLEGAL: default: siginfo.si_signo = SIGILL; siginfo.si_code = ILL_ILLOPC; siginfo.si_addr = (caddr_t)rp->r_pc; fault = FLTILL; break; } break; case T_UNIMP_LDD: case T_UNIMP_STD: if (simulate_lddstd(rp, &badaddr) == SIMU_SUCCESS) { /* skip the successfully simulated instruction */ rp->r_pc = rp->r_npc; rp->r_npc += 4; goto cleanup; /*NOTREACHED*/ } /* * A third party driver executed an {LDD,STD,LDDA,STDA} * that we couldn't simulate. */ if (nfload(rp, NULL)) goto cleanup; if (curthread->t_lofault) { if (lodebug) { showregs(type, rp, addr, 0); traceback((caddr_t)rp->r_sp); } rp->r_g1 = EFAULT; rp->r_pc = curthread->t_lofault; rp->r_npc = rp->r_pc + 4; goto cleanup; } (void) die(type, rp, addr, 0); /*NOTREACHED*/ case T_IDIV0 + T_USER: /* integer divide by zero */ case T_DIV0 + T_USER: /* integer divide by zero */ if (tudebug && tudebugfpe) showregs(type, rp, (caddr_t)0, 0); bzero(&siginfo, sizeof (siginfo)); siginfo.si_signo = SIGFPE; siginfo.si_code = FPE_INTDIV; siginfo.si_addr = (caddr_t)rp->r_pc; fault = FLTIZDIV; break; case T_INT_OVERFLOW + T_USER: /* integer overflow */ if (tudebug && tudebugfpe) showregs(type, rp, (caddr_t)0, 0); bzero(&siginfo, sizeof (siginfo)); siginfo.si_signo = SIGFPE; siginfo.si_code = FPE_INTOVF; siginfo.si_addr = (caddr_t)rp->r_pc; fault = FLTIOVF; break; case T_BREAKPOINT + T_USER: /* breakpoint trap (t 1) */ if (tudebug && tudebugbpt) showregs(type, rp, (caddr_t)0, 0); bzero(&siginfo, sizeof (siginfo)); siginfo.si_signo = SIGTRAP; siginfo.si_code = TRAP_BRKPT; siginfo.si_addr = (caddr_t)rp->r_pc; fault = FLTBPT; break; case T_TAG_OVERFLOW + T_USER: /* tag overflow (taddcctv, tsubcctv) */ if (tudebug) showregs(type, rp, (caddr_t)0, 0); bzero(&siginfo, sizeof (siginfo)); siginfo.si_signo = SIGEMT; siginfo.si_code = EMT_TAGOVF; siginfo.si_addr = (caddr_t)rp->r_pc; fault = FLTACCESS; break; case T_FLUSH_PCB + T_USER: /* finish user window overflow */ case T_FLUSHW + T_USER: /* finish user window flush */ /* * This trap is entered from sys_rtt in locore.s when, * upon return to user is is found that there are user * windows in pcb_wbuf. This happens because they could * not be saved on the user stack, either because it * wasn't resident or because it was misaligned. */ { int error; caddr_t sp; error = flush_user_windows_to_stack(&sp); /* * Possible errors: * error copying out * unaligned stack pointer * The first is given to us as the return value * from flush_user_windows_to_stack(). The second * results in residual windows in the pcb. */ if (error != 0) { /* * EINTR comes from a signal during copyout; * we should not post another signal. */ if (error != EINTR) { /* * Zap the process with a SIGSEGV - process * may be managing its own stack growth by * taking SIGSEGVs on a different signal stack. */ bzero(&siginfo, sizeof (siginfo)); siginfo.si_signo = SIGSEGV; siginfo.si_code = SEGV_MAPERR; siginfo.si_addr = sp; fault = FLTBOUNDS; } break; } else if (mpcb->mpcb_wbcnt) { bzero(&siginfo, sizeof (siginfo)); siginfo.si_signo = SIGILL; siginfo.si_code = ILL_BADSTK; siginfo.si_addr = (caddr_t)rp->r_pc; fault = FLTILL; break; } } /* * T_FLUSHW is used when handling a ta 0x3 -- the old flush * window trap -- which is implemented by executing the * flushw instruction. The flushw can trap if any of the * stack pages are not writable for whatever reason. In this * case only, we advance the pc to the next instruction so * that the user thread doesn't needlessly execute the trap * again. Normally this wouldn't be a problem -- we'll * usually only end up here if this is the first touch to a * stack page -- since the second execution won't trap, but * if there's a watchpoint on the stack page the user thread * would spin, continuously executing the trap instruction. */ if (type == T_FLUSHW + T_USER) { rp->r_pc = rp->r_npc; rp->r_npc += 4; } goto out; case T_AST + T_USER: /* profiling or resched pseudo trap */ if (lwp->lwp_pcb.pcb_flags & CPC_OVERFLOW) { lwp->lwp_pcb.pcb_flags &= ~CPC_OVERFLOW; if (kcpc_overflow_ast()) { /* * Signal performance counter overflow */ if (tudebug) showregs(type, rp, (caddr_t)0, 0); bzero(&siginfo, sizeof (siginfo)); siginfo.si_signo = SIGEMT; siginfo.si_code = EMT_CPCOVF; siginfo.si_addr = (caddr_t)rp->r_pc; /* for trap_cleanup(), below */ oldpc = rp->r_pc - 4; fault = FLTCPCOVF; } } /* * The CPC_OVERFLOW check above may already have populated * siginfo and set fault, so the checks below must not * touch these and the functions they call must use * trapsig() directly. */ if (lwp->lwp_pcb.pcb_flags & ASYNC_HWERR) { lwp->lwp_pcb.pcb_flags &= ~ASYNC_HWERR; trap_async_hwerr(); } if (lwp->lwp_pcb.pcb_flags & ASYNC_BERR) { lwp->lwp_pcb.pcb_flags &= ~ASYNC_BERR; trap_async_berr_bto(ASYNC_BERR, rp); } if (lwp->lwp_pcb.pcb_flags & ASYNC_BTO) { lwp->lwp_pcb.pcb_flags &= ~ASYNC_BTO; trap_async_berr_bto(ASYNC_BTO, rp); } break; } if (fault) { /* We took a fault so abort single step. */ lwp->lwp_pcb.pcb_flags &= ~(NORMAL_STEP|WATCH_STEP); } trap_cleanup(rp, fault, &siginfo, oldpc == rp->r_pc); out: /* We can't get here from a system trap */ ASSERT(type & T_USER); trap_rtt(); (void) new_mstate(curthread, mstate); /* Kernel probe */ TNF_PROBE_1(thread_state, "thread", /* CSTYLED */, tnf_microstate, state, LMS_USER); TRACE_0(TR_FAC_TRAP, TR_C_TRAP_HANDLER_EXIT, "C_trap_handler_exit"); return; cleanup: /* system traps end up here */ ASSERT(!(type & T_USER)); TRACE_0(TR_FAC_TRAP, TR_C_TRAP_HANDLER_EXIT, "C_trap_handler_exit"); } void trap_cleanup( struct regs *rp, uint_t fault, k_siginfo_t *sip, int restartable) { extern void aio_cleanup(); proc_t *p = ttoproc(curthread); klwp_id_t lwp = ttolwp(curthread); if (fault) { /* * Remember the fault and fault address * for real-time (SIGPROF) profiling. */ lwp->lwp_lastfault = fault; lwp->lwp_lastfaddr = sip->si_addr; DTRACE_PROC2(fault, int, fault, ksiginfo_t *, sip); /* * If a debugger has declared this fault to be an * event of interest, stop the lwp. Otherwise just * deliver the associated signal. */ if (sip->si_signo != SIGKILL && prismember(&p->p_fltmask, fault) && stop_on_fault(fault, sip) == 0) sip->si_signo = 0; } if (sip->si_signo) trapsig(sip, restartable); if (lwp->lwp_oweupc) profil_tick(rp->r_pc); if (curthread->t_astflag | curthread->t_sig_check) { /* * Turn off the AST flag before checking all the conditions that * may have caused an AST. This flag is on whenever a signal or * unusual condition should be handled after the next trap or * syscall. */ astoff(curthread); curthread->t_sig_check = 0; /* * The following check is legal for the following reasons: * 1) The thread we are checking, is ourselves, so there is * no way the proc can go away. * 2) The only time we need to be protected by the * lock is if the binding is changed. * * Note we will still take the lock and check the binding * if the condition was true without the lock held. This * prevents lock contention among threads owned by the * same proc. */ if (curthread->t_proc_flag & TP_CHANGEBIND) { mutex_enter(&p->p_lock); if (curthread->t_proc_flag & TP_CHANGEBIND) { timer_lwpbind(); curthread->t_proc_flag &= ~TP_CHANGEBIND; } mutex_exit(&p->p_lock); } /* * for kaio requests that are on the per-process poll queue, * aiop->aio_pollq, they're AIO_POLL bit is set, the kernel * should copyout their result_t to user memory. by copying * out the result_t, the user can poll on memory waiting * for the kaio request to complete. */ if (p->p_aio) aio_cleanup(0); /* * If this LWP was asked to hold, call holdlwp(), which will * stop. holdlwps() sets this up and calls pokelwps() which * sets the AST flag. * * Also check TP_EXITLWP, since this is used by fresh new LWPs * through lwp_rtt(). That flag is set if the lwp_create(2) * syscall failed after creating the LWP. */ if (ISHOLD(p)) holdlwp(); /* * All code that sets signals and makes ISSIG evaluate true must * set t_astflag afterwards. */ if (ISSIG_PENDING(curthread, lwp, p)) { if (issig(FORREAL)) psig(); curthread->t_sig_check = 1; } if (curthread->t_rprof != NULL) { realsigprof(0, 0); curthread->t_sig_check = 1; } } } /* * Called from fp_traps when a floating point trap occurs. * Note that the T_DATA_EXCEPTION case does not use X_FAULT_TYPE(mmu_fsr), * because mmu_fsr (now changed to code) is always 0. * Note that the T_UNIMP_INSTR case does not call simulate_unimp(), * because the simulator only simulates multiply and divide instructions, * which would not cause floating point traps in the first place. * XXX - Supervisor mode floating point traps? */ void fpu_trap(struct regs *rp, caddr_t addr, uint32_t type, uint32_t code) { proc_t *p = ttoproc(curthread); klwp_id_t lwp = ttolwp(curthread); k_siginfo_t siginfo; uint_t op3, fault = 0; int mstate; char *badaddr; kfpu_t *fp; struct fpq *pfpq; uint32_t inst; utrap_handler_t *utrapp; CPU_STATS_ADDQ(CPU, sys, trap, 1); ASSERT(curthread->t_schedflag & TS_DONT_SWAP); if (USERMODE(rp->r_tstate)) { /* * Set lwp_state before trying to acquire any * adaptive lock */ ASSERT(lwp != NULL); lwp->lwp_state = LWP_SYS; /* * Set up the current cred to use during this trap. u_cred * no longer exists. t_cred is used instead. * The current process credential applies to the thread for * the entire trap. If trapping from the kernel, this * should already be set up. */ if (curthread->t_cred != p->p_cred) { cred_t *oldcred = curthread->t_cred; /* * DTrace accesses t_cred in probe context. t_cred * must always be either NULL, or point to a valid, * allocated cred structure. */ curthread->t_cred = crgetcred(); crfree(oldcred); } ASSERT(lwp->lwp_regs == rp); mstate = new_mstate(curthread, LMS_TRAP); siginfo.si_signo = 0; type |= T_USER; } TRACE_1(TR_FAC_TRAP, TR_C_TRAP_HANDLER_ENTER, "C_fpu_trap_handler_enter:type %x", type); if (tudebug && tudebugfpe) showregs(type, rp, addr, 0); bzero(&siginfo, sizeof (siginfo)); siginfo.si_code = code; siginfo.si_addr = addr; switch (type) { case T_FP_EXCEPTION_IEEE + T_USER: /* FPU arithmetic exception */ /* * FPU arithmetic exception - fake up a fpq if we * came here directly from _fp_ieee_exception, * which is indicated by a zero fpu_qcnt. */ fp = lwptofpu(curthread->t_lwp); utrapp = curthread->t_procp->p_utraps; if (fp->fpu_qcnt == 0) { inst = fetch_user_instr((caddr_t)rp->r_pc); lwp->lwp_state = LWP_SYS; pfpq = &fp->fpu_q->FQu.fpq; pfpq->fpq_addr = (uint32_t *)rp->r_pc; pfpq->fpq_instr = inst; fp->fpu_qcnt = 1; fp->fpu_q_entrysize = sizeof (struct fpq); #ifdef SF_V9_TABLE_28 /* * Spitfire and blackbird followed the SPARC V9 manual * paragraph 3 of section 5.1.7.9 FSR_current_exception * (cexc) for setting fsr.cexc bits on underflow and * overflow traps when the fsr.tem.inexact bit is set, * instead of following Table 28. Bugid 1263234. */ { extern int spitfire_bb_fsr_bug; if (spitfire_bb_fsr_bug && (fp->fpu_fsr & FSR_TEM_NX)) { if (((fp->fpu_fsr & FSR_TEM_OF) == 0) && (fp->fpu_fsr & FSR_CEXC_OF)) { fp->fpu_fsr &= ~FSR_CEXC_OF; fp->fpu_fsr |= FSR_CEXC_NX; _fp_write_pfsr(&fp->fpu_fsr); siginfo.si_code = FPE_FLTRES; } if (((fp->fpu_fsr & FSR_TEM_UF) == 0) && (fp->fpu_fsr & FSR_CEXC_UF)) { fp->fpu_fsr &= ~FSR_CEXC_UF; fp->fpu_fsr |= FSR_CEXC_NX; _fp_write_pfsr(&fp->fpu_fsr); siginfo.si_code = FPE_FLTRES; } } } #endif /* SF_V9_TABLE_28 */ rp->r_pc = rp->r_npc; rp->r_npc += 4; } else if (utrapp && utrapp[UT_FP_EXCEPTION_IEEE_754]) { /* * The user had a trap handler installed. Jump to * the trap handler instead of signalling the process. */ rp->r_pc = (long)utrapp[UT_FP_EXCEPTION_IEEE_754]; rp->r_npc = rp->r_pc + 4; break; } siginfo.si_signo = SIGFPE; fault = FLTFPE; break; case T_DATA_EXCEPTION + T_USER: /* user data access exception */ siginfo.si_signo = SIGSEGV; fault = FLTBOUNDS; break; case T_LDDF_ALIGN + T_USER: /* 64 bit user lddfa alignment error */ case T_STDF_ALIGN + T_USER: /* 64 bit user stdfa alignment error */ alignfaults++; lwp->lwp_state = LWP_SYS; if (&vis1_partial_support != NULL) { bzero(&siginfo, sizeof (siginfo)); if (vis1_partial_support(rp, &siginfo, &fault) == 0) goto out; } if (do_unaligned(rp, &badaddr) == SIMU_SUCCESS) { rp->r_pc = rp->r_npc; rp->r_npc += 4; goto out; } fp = lwptofpu(curthread->t_lwp); fp->fpu_qcnt = 0; siginfo.si_signo = SIGSEGV; siginfo.si_code = SEGV_MAPERR; siginfo.si_addr = badaddr; fault = FLTBOUNDS; break; case T_ALIGNMENT + T_USER: /* user alignment error */ /* * If the user has to do unaligned references * the ugly stuff gets done here. * Only handles vanilla loads and stores. */ alignfaults++; if (p->p_fixalignment) { if (do_unaligned(rp, &badaddr) == SIMU_SUCCESS) { rp->r_pc = rp->r_npc; rp->r_npc += 4; goto out; } siginfo.si_signo = SIGSEGV; siginfo.si_code = SEGV_MAPERR; siginfo.si_addr = badaddr; fault = FLTBOUNDS; } else { siginfo.si_signo = SIGBUS; siginfo.si_code = BUS_ADRALN; if (rp->r_pc & 3) { /* offending address, if pc */ siginfo.si_addr = (caddr_t)rp->r_pc; } else { if (calc_memaddr(rp, &badaddr) == SIMU_UNALIGN) siginfo.si_addr = badaddr; else siginfo.si_addr = (caddr_t)rp->r_pc; } fault = FLTACCESS; } break; case T_UNIMP_INSTR + T_USER: /* illegal instruction fault */ siginfo.si_signo = SIGILL; inst = fetch_user_instr((caddr_t)rp->r_pc); op3 = (inst >> 19) & 0x3F; if ((op3 == IOP_V8_STQFA) || (op3 == IOP_V8_STDFA)) siginfo.si_code = ILL_ILLADR; else siginfo.si_code = ILL_ILLTRP; fault = FLTILL; break; default: (void) die(type, rp, addr, 0); /*NOTREACHED*/ } /* * We can't get here from a system trap * Never restart any instruction which got here from an fp trap. */ ASSERT(type & T_USER); trap_cleanup(rp, fault, &siginfo, 0); out: trap_rtt(); (void) new_mstate(curthread, mstate); } void trap_rtt(void) { klwp_id_t lwp = ttolwp(curthread); /* * Restore register window if a debugger modified it. * Set up to perform a single-step if a debugger requested it. */ if (lwp->lwp_pcb.pcb_xregstat != XREGNONE) xregrestore(lwp, 0); /* * Set state to LWP_USER here so preempt won't give us a kernel * priority if it occurs after this point. Call CL_TRAPRET() to * restore the user-level priority. * * It is important that no locks (other than spinlocks) be entered * after this point before returning to user mode (unless lwp_state * is set back to LWP_SYS). */ lwp->lwp_state = LWP_USER; if (curthread->t_trapret) { curthread->t_trapret = 0; thread_lock(curthread); CL_TRAPRET(curthread); thread_unlock(curthread); } if (CPU->cpu_runrun) preempt(); if (lwp->lwp_pcb.pcb_step != STEP_NONE) prdostep(); TRACE_0(TR_FAC_TRAP, TR_C_TRAP_HANDLER_EXIT, "C_trap_handler_exit"); } #define IS_LDASI(o) \ ((o) == (uint32_t)0xC0C00000 || (o) == (uint32_t)0xC0800000 || \ (o) == (uint32_t)0xC1800000) #define IS_IMM_ASI(i) (((i) & 0x2000) == 0) #define IS_ASINF(a) (((a) & 0xF6) == 0x82) #define IS_LDDA(i) (((i) & 0xC1F80000) == 0xC0980000) static int nfload(struct regs *rp, int *instrp) { uint_t instr, asi, op3, rd; size_t len; struct as *as; caddr_t addr; FPU_DREGS_TYPE zero; extern int segnf_create(); if (USERMODE(rp->r_tstate)) instr = fetch_user_instr((caddr_t)rp->r_pc); else instr = *(int *)rp->r_pc; if (instrp) *instrp = instr; op3 = (uint_t)(instr & 0xC1E00000); if (!IS_LDASI(op3)) return (0); if (IS_IMM_ASI(instr)) asi = (instr & 0x1FE0) >> 5; else asi = (uint_t)((rp->r_tstate >> TSTATE_ASI_SHIFT) & TSTATE_ASI_MASK); if (!IS_ASINF(asi)) return (0); if (calc_memaddr(rp, &addr) == SIMU_SUCCESS) { len = 1; as = USERMODE(rp->r_tstate) ? ttoproc(curthread)->p_as : &kas; as_rangelock(as); if (as_gap(as, len, &addr, &len, 0, addr) == 0) (void) as_map(as, addr, len, segnf_create, NULL); as_rangeunlock(as); } zero = 0; rd = (instr >> 25) & 0x1f; if (IS_FLOAT(instr)) { uint_t dbflg = ((instr >> 19) & 3) == 3; if (dbflg) { /* clever v9 reg encoding */ if (rd & 1) rd = (rd & 0x1e) | 0x20; rd >>= 1; } if (fpu_exists) { if (!(_fp_read_fprs() & FPRS_FEF)) fp_enable(); if (dbflg) _fp_write_pdreg(&zero, rd); else _fp_write_pfreg((uint_t *)&zero, rd); } else { kfpu_t *fp = lwptofpu(curthread->t_lwp); if (!fp->fpu_en) fp_enable(); if (dbflg) fp->fpu_fr.fpu_dregs[rd] = zero; else fp->fpu_fr.fpu_regs[rd] = 0; } } else { (void) putreg(&zero, rp, rd, &addr); if (IS_LDDA(instr)) (void) putreg(&zero, rp, rd + 1, &addr); } rp->r_pc = rp->r_npc; rp->r_npc += 4; return (1); } kmutex_t atomic_nc_mutex; /* * The following couple of routines are for userland drivers which * do atomics to noncached addresses. This sort of worked on previous * platforms -- the operation really wasn't atomic, but it didn't generate * a trap as sun4u systems do. */ static int swap_nc(struct regs *rp, int instr) { uint64_t rdata, mdata; caddr_t addr, badaddr; uint_t tmp, rd; (void) flush_user_windows_to_stack(NULL); rd = (instr >> 25) & 0x1f; if (calc_memaddr(rp, &addr) != SIMU_SUCCESS) return (0); if (getreg(rp, rd, &rdata, &badaddr)) return (0); mutex_enter(&atomic_nc_mutex); if (fuword32(addr, &tmp) == -1) { mutex_exit(&atomic_nc_mutex); return (0); } mdata = (u_longlong_t)tmp; if (suword32(addr, (uint32_t)rdata) == -1) { mutex_exit(&atomic_nc_mutex); return (0); } (void) putreg(&mdata, rp, rd, &badaddr); mutex_exit(&atomic_nc_mutex); return (1); } static int ldstub_nc(struct regs *rp, int instr) { uint64_t mdata; caddr_t addr, badaddr; uint_t rd; uint8_t tmp; (void) flush_user_windows_to_stack(NULL); rd = (instr >> 25) & 0x1f; if (calc_memaddr(rp, &addr) != SIMU_SUCCESS) return (0); mutex_enter(&atomic_nc_mutex); if (fuword8(addr, &tmp) == -1) { mutex_exit(&atomic_nc_mutex); return (0); } mdata = (u_longlong_t)tmp; if (suword8(addr, (uint8_t)0xff) == -1) { mutex_exit(&atomic_nc_mutex); return (0); } (void) putreg(&mdata, rp, rd, &badaddr); mutex_exit(&atomic_nc_mutex); return (1); } /* * This function helps instr_size() determine the operand size. * It is called for the extended ldda/stda asi's. */ int extended_asi_size(int asi) { switch (asi) { case ASI_PST8_P: case ASI_PST8_S: case ASI_PST16_P: case ASI_PST16_S: case ASI_PST32_P: case ASI_PST32_S: case ASI_PST8_PL: case ASI_PST8_SL: case ASI_PST16_PL: case ASI_PST16_SL: case ASI_PST32_PL: case ASI_PST32_SL: return (8); case ASI_FL8_P: case ASI_FL8_S: case ASI_FL8_PL: case ASI_FL8_SL: return (1); case ASI_FL16_P: case ASI_FL16_S: case ASI_FL16_PL: case ASI_FL16_SL: return (2); case ASI_BLK_P: case ASI_BLK_S: case ASI_BLK_PL: case ASI_BLK_SL: case ASI_BLK_COMMIT_P: case ASI_BLK_COMMIT_S: return (64); } return (0); } /* * Patch non-zero to disable preemption of threads in the kernel. */ int IGNORE_KERNEL_PREEMPTION = 0; /* XXX - delete this someday */ struct kpreempt_cnts { /* kernel preemption statistics */ int kpc_idle; /* executing idle thread */ int kpc_intr; /* executing interrupt thread */ int kpc_clock; /* executing clock thread */ int kpc_blocked; /* thread has blocked preemption (t_preempt) */ int kpc_notonproc; /* thread is surrendering processor */ int kpc_inswtch; /* thread has ratified scheduling decision */ int kpc_prilevel; /* processor interrupt level is too high */ int kpc_apreempt; /* asynchronous preemption */ int kpc_spreempt; /* synchronous preemption */ } kpreempt_cnts; /* * kernel preemption: forced rescheduling * preempt the running kernel thread. */ void kpreempt(int asyncspl) { if (IGNORE_KERNEL_PREEMPTION) { aston(CPU->cpu_dispthread); return; } /* * Check that conditions are right for kernel preemption */ do { if (curthread->t_preempt) { /* * either a privileged thread (idle, panic, interrupt) * or will check when t_preempt is lowered */ if (curthread->t_pri < 0) kpreempt_cnts.kpc_idle++; else if (curthread->t_flag & T_INTR_THREAD) { kpreempt_cnts.kpc_intr++; if (curthread->t_pil == CLOCK_LEVEL) kpreempt_cnts.kpc_clock++; } else kpreempt_cnts.kpc_blocked++; aston(CPU->cpu_dispthread); return; } if (curthread->t_state != TS_ONPROC || curthread->t_disp_queue != CPU->cpu_disp) { /* this thread will be calling swtch() shortly */ kpreempt_cnts.kpc_notonproc++; if (CPU->cpu_thread != CPU->cpu_dispthread) { /* already in swtch(), force another */ kpreempt_cnts.kpc_inswtch++; siron(); } return; } if (((asyncspl != KPREEMPT_SYNC) ? spltoipl(asyncspl) : getpil()) >= DISP_LEVEL) { /* * We can't preempt this thread if it is at * a PIL >= DISP_LEVEL since it may be holding * a spin lock (like sched_lock). */ siron(); /* check back later */ kpreempt_cnts.kpc_prilevel++; return; } /* * block preemption so we don't have multiple preemptions * pending on the interrupt stack */ curthread->t_preempt++; if (asyncspl != KPREEMPT_SYNC) { splx(asyncspl); kpreempt_cnts.kpc_apreempt++; } else kpreempt_cnts.kpc_spreempt++; preempt(); curthread->t_preempt--; } while (CPU->cpu_kprunrun); } static enum seg_rw get_accesstype(struct regs *rp) { uint32_t instr; if (USERMODE(rp->r_tstate)) instr = fetch_user_instr((caddr_t)rp->r_pc); else instr = *(uint32_t *)rp->r_pc; if (IS_FLUSH(instr)) return (S_OTHER); if (IS_STORE(instr)) return (S_WRITE); else return (S_READ); }