/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* Copyright (c) 1990, 1991 UNIX System Laboratories, Inc. */ /* Copyright (c) 1984, 1986, 1987, 1988, 1989, 1990 AT&T */ /* All Rights Reserved */ /* Copyright (c) 1987, 1988 Microsoft Corporation */ /* All Rights Reserved */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #if defined(__lint) #include #include #include #else /* __lint */ #include #include #include #include #include #include #include #include "assym.h" #endif /* __lint */ /* * We implement two flavours of system call entry points * * - {int,lcall}/iret (i386) * - sysenter/sysexit (Pentium II and beyond) * * The basic pattern used in the handlers is to check to see if we can * do fast (simple) version of the system call; if we can't we use various * C routines that handle corner cases and debugging. * * To reduce the amount of assembler replication, yet keep the system call * implementations vaguely comprehensible, the common code in the body * of the handlers is broken up into a set of preprocessor definitions * below. */ /* * When we have SYSCALLTRACE defined, we sneak an extra * predicate into a couple of tests. */ #if defined(SYSCALLTRACE) #define ORL_SYSCALLTRACE(r32) \ orl syscalltrace, r32 #else #define ORL_SYSCALLTRACE(r32) #endif /* * This check is false whenever we want to go fast i.e. * * if (code >= NSYSCALL || * t->t_pre_sys || (t->t_proc_flag & TP_WATCHPT) != 0) * do full version * #ifdef SYSCALLTRACE * if (syscalltrace) * do full version * #endif * * Preconditions: * - t curthread * - code contains the syscall number * Postconditions: * - %ecx and %edi are smashed * - condition code flag ZF is cleared if pre-sys is too complex */ #define CHECK_PRESYS_NE(t, code) \ movzbl T_PRE_SYS(t), %edi; \ movzwl T_PROC_FLAG(t), %ecx; \ andl $TP_WATCHPT, %ecx; \ orl %ecx, %edi; \ cmpl $NSYSCALL, code; \ setae %cl; \ movzbl %cl, %ecx; \ orl %ecx, %edi; \ ORL_SYSCALLTRACE(%edi) /* * When the brand's callback is invoked, the stack will look like this: * -------------------------------------- * | 'scratch space' | * | user's %ebx | * | user's %gs selector | * | kernel's %gs selector | * | | lwp brand data | * | | proc brand data | * v | user return address | * | callback wrapper return addr | * -------------------------------------- * * The lx brand (at least) uses each of these fields. * If the brand code returns, we assume that we are meant to execute the * normal system call path. */ #define BRAND_CALLBACK(callback_id) \ subl $4, %esp /* save some scratch space */ ;\ pushl %ebx /* save %ebx to use for scratch */ ;\ pushl %gs /* save the user %gs */ ;\ movl $KGS_SEL, %ebx ;\ pushl %ebx /* push kernel's %gs */ ;\ movw %bx, %gs /* switch to the kernel's %gs */ ;\ movl %gs:CPU_THREAD, %ebx /* load the thread pointer */ ;\ movl T_LWP(%ebx), %ebx /* load the lwp pointer */ ;\ pushl LWP_BRAND(%ebx) /* push the lwp's brand data */ ;\ movl LWP_PROCP(%ebx), %ebx /* load the proc pointer */ ;\ pushl P_BRAND_DATA(%ebx) /* push the proc's brand data */ ;\ movl P_BRAND(%ebx), %ebx /* load the brand pointer */ ;\ movl B_MACHOPS(%ebx), %ebx /* load the machops pointer */ ;\ movl _CONST(_MUL(callback_id, CPTRSIZE))(%ebx), %ebx ;\ cmpl $0, %ebx ;\ je 1f ;\ movl %ebx, 20(%esp) /* save callback to scratch */ ;\ movl 12(%esp), %ebx /* grab the the user %gs */ ;\ movw %bx, %gs /* restore the user %gs */ ;\ movl 16(%esp), %ebx /* restore %ebx */ ;\ pushl 24(%esp) /* push the return address */ ;\ call *24(%esp) /* call callback */ ;\ addl $4, %esp /* get rid of ret addr */ ;\ 1: movl 12(%esp), %ebx /* grab the the user %gs */ ;\ movw %bx, %gs /* restore the user %gs */ ;\ movl 16(%esp), %ebx /* restore user's %ebx */ ;\ addl $24, %esp /* restore stack ptr */ #define MSTATE_TRANSITION(from, to) \ pushl $to; \ pushl $from; \ call syscall_mstate; \ addl $0x8, %esp /* * aka CPU_STATS_ADDQ(CPU, sys.syscall, 1) * This must be called with interrupts or preemption disabled. */ #define CPU_STATS_SYS_SYSCALL_INC \ addl $1, %gs:CPU_STATS_SYS_SYSCALL; \ adcl $0, %gs:CPU_STATS_SYS_SYSCALL+4; #if !defined(__lint) /* * ASSERT(lwptoregs(lwp) == rp); * * this may seem obvious, but very odd things happen if this * assertion is false * * Preconditions: * -none- * Postconditions (if assertion is true): * %esi and %edi are smashed */ #if defined(DEBUG) __lwptoregs_msg: .string "%M%:%d lwptoregs(%p) [%p] != rp [%p]" #define ASSERT_LWPTOREGS(t, rp) \ movl T_LWP(t), %esi; \ movl LWP_REGS(%esi), %edi; \ cmpl rp, %edi; \ je 7f; \ pushl rp; \ pushl %edi; \ pushl %esi; \ pushl $__LINE__; \ pushl $__lwptoregs_msg; \ call panic; \ 7: #else #define ASSERT_LWPTOREGS(t, rp) #endif #endif /* __lint */ /* * This is an assembler version of this fragment: * * lwp->lwp_state = LWP_SYS; * lwp->lwp_ru.sysc++; * lwp->lwp_eosys = NORMALRETURN; * lwp->lwp_ap = argp; * * Preconditions: * -none- * Postconditions: * -none- */ #define SET_LWP(lwp, argp) \ movb $LWP_SYS, LWP_STATE(lwp); \ addl $1, LWP_RU_SYSC(lwp); \ adcl $0, LWP_RU_SYSC+4(lwp); \ movb $NORMALRETURN, LWP_EOSYS(lwp); \ movl argp, LWP_AP(lwp) /* * Set up the thread, lwp, find the handler, and copy * in the arguments from userland to the kernel stack. * * Preconditions: * - %eax contains the syscall number * Postconditions: * - %eax contains a pointer to the sysent structure * - %ecx is zeroed * - %esi, %edi are smashed * - %esp is SYS_DROPped ready for the syscall */ #define SIMPLE_SYSCALL_PRESYS(t, faultlabel) \ movl T_LWP(t), %esi; \ movw %ax, T_SYSNUM(t); \ subl $SYS_DROP, %esp; \ shll $SYSENT_SIZE_SHIFT, %eax; \ SET_LWP(%esi, %esp); \ leal sysent(%eax), %eax; \ movzbl SY_NARG(%eax), %ecx; \ testl %ecx, %ecx; \ jz 4f; \ movl %esp, %edi; \ movl SYS_DROP + REGOFF_UESP(%esp), %esi; \ movl $faultlabel, T_LOFAULT(t); \ addl $4, %esi; \ rep; \ smovl; \ movl %ecx, T_LOFAULT(t); \ 4: /* * Check to see if a simple return is possible i.e. * * if ((t->t_post_sys_ast | syscalltrace) != 0) * do full version; * * Preconditions: * - t is curthread * Postconditions: * - condition code NE is set if post-sys is too complex * - rtmp is zeroed if it isn't (we rely on this!) */ #define CHECK_POSTSYS_NE(t, rtmp) \ xorl rtmp, rtmp; \ ORL_SYSCALLTRACE(rtmp); \ orl T_POST_SYS_AST(t), rtmp; \ cmpl $0, rtmp /* * Fix up the lwp, thread, and eflags for a successful return * * Preconditions: * - zwreg contains zero * Postconditions: * - %esp has been unSYS_DROPped * - %esi is smashed (points to lwp) */ #define SIMPLE_SYSCALL_POSTSYS(t, zwreg) \ movl T_LWP(t), %esi; \ addl $SYS_DROP, %esp; \ movw zwreg, T_SYSNUM(t); \ movb $LWP_USER, LWP_STATE(%esi); \ andb $_CONST(0xffff - PS_C), REGOFF_EFL(%esp) /* * System call handler. This is the destination of both the call * gate (lcall 0x27) _and_ the interrupt gate (int 0x91). For our purposes, * there are two significant differences between an interrupt gate and a call * gate: * * 1) An interrupt gate runs the handler with interrupts disabled, whereas a * call gate runs the handler with whatever EFLAGS settings were in effect at * the time of the call. * * 2) An interrupt gate pushes the contents of the EFLAGS register at the time * of the interrupt onto the stack, whereas a call gate does not. * * Because we use the following code sequence to handle system calls made from * _both_ a call gate _and_ an interrupt gate, these two differences must be * respected. In regards to number 1) above, the handler must ensure that a sane * EFLAGS snapshot is stored on the stack so that when the kernel returns back * to the user via iret (which returns to user with the EFLAGS value saved on * the stack), interrupts are re-enabled. * * In regards to number 2) above, the handler must always put a current snapshot * of EFLAGS onto the stack in the appropriate place. If we came in via an * interrupt gate, we will be clobbering the EFLAGS value that was pushed by * the interrupt gate. This is OK, as the only bit that was changed by the * hardware was the IE (interrupt enable) bit, which for an interrupt gate is * now off. If we were to do nothing, the stack would contain an EFLAGS with * IE off, resulting in us eventually returning back to the user with interrupts * disabled. The solution is to turn on the IE bit in the EFLAGS value saved on * the stack. * * Another subtlety which deserves mention is the difference between the two * descriptors. The call gate descriptor is set to instruct the hardware to copy * one parameter from the user stack to the kernel stack, whereas the interrupt * gate descriptor doesn't use the parameter passing mechanism at all. The * kernel doesn't actually use the parameter that is copied by the hardware; the * only reason it does this is so that there is a space on the stack large * enough to hold an EFLAGS register value, which happens to be in the correct * place for use by iret when we go back to userland. How convenient. * * Stack frame description in syscall() and callees. * * |------------| * | regs | +(8*4)+4 registers * |------------| * | 8 args | <- %esp MAXSYSARGS (currently 8) arguments * |------------| * */ #define SYS_DROP _CONST(_MUL(MAXSYSARGS, 4)) #if defined(__lint) /*ARGSUSED*/ void sys_call() {} void _allsyscalls() {} size_t _allsyscalls_size; #else /* __lint */ ENTRY_NP2(brand_sys_call, _allsyscalls) BRAND_CALLBACK(BRAND_CB_SYSCALL) ALTENTRY(sys_call) / on entry eax = system call number / set up the stack to look as in reg.h subl $8, %esp / pad the stack with ERRCODE and TRAPNO SYSCALL_PUSH #ifdef TRAPTRACE TRACE_PTR(%edi, %ebx, %ebx, %ecx, $TT_SYSCALL) / Uses labels "8" and "9" TRACE_REGS(%edi, %esp, %ebx, %ecx) / Uses label "9" pushl %eax TRACE_STAMP(%edi) / Clobbers %eax, %edx, uses "9" popl %eax movl %eax, TTR_SYSNUM(%edi) #endif _watch_do_syscall: movl %esp, %ebp pushl %eax / preserve across mstate call MSTATE_TRANSITION(LMS_USER, LMS_SYSTEM) popl %eax movl %gs:CPU_THREAD, %ebx / Interrupts are enabled here, so we must make sure this thread doesn't / migrate off the CPU while it updates the CPU stats. addb $1, T_PREEMPT(%ebx) CPU_STATS_SYS_SYSCALL_INC subb $1, T_PREEMPT(%ebx) / Set EFLAGS to standard kernel settings. ENABLE_INTR_FLAGS ASSERT_LWPTOREGS(%ebx, %esp) CHECK_PRESYS_NE(%ebx, %eax) jne _full_syscall_presys SIMPLE_SYSCALL_PRESYS(%ebx, _syscall_fault) _syslcall_call: call *SY_CALLC(%eax) _syslcall_done: CHECK_POSTSYS_NE(%ebx, %ecx) jne _full_syscall_postsys SIMPLE_SYSCALL_POSTSYS(%ebx, %cx) movl %eax, REGOFF_EAX(%esp) movl %edx, REGOFF_EDX(%esp) MSTATE_TRANSITION(LMS_SYSTEM, LMS_USER) / / get back via iret / cli jmp set_user_regs _full_syscall_presys: movl T_LWP(%ebx), %esi subl $SYS_DROP, %esp movb $LWP_SYS, LWP_STATE(%esi) pushl %esp pushl %ebx call syscall_entry addl $8, %esp jmp _syslcall_call _full_syscall_postsys: addl $SYS_DROP, %esp pushl %edx pushl %eax pushl %ebx call syscall_exit addl $12, %esp MSTATE_TRANSITION(LMS_SYSTEM, LMS_USER) jmp sys_rtt_syscall _syscall_fault: push $0xe / EFAULT call set_errno addl $4, %esp xorl %eax, %eax / fake syscall_err() xorl %edx, %edx jmp _syslcall_done SET_SIZE(sys_call) SET_SIZE(brand_sys_call) #endif /* __lint */ /* * System call handler via the sysenter instruction * * Here's how syscall entry usually works (see sys_call for details). * * There, the caller (lcall or int) in userland has arranged that: * * - %eax contains the syscall number * - the user stack contains the args to the syscall * * Normally the lcall instruction into the call gate causes the processor * to push %ss, %esp, , %cs, %eip onto the kernel stack. * The sys_call handler then leaves space for r_trapno and r_err, and * pusha's {%eax, %ecx, %edx, %ebx, %esp, %ebp, %esi, %edi}, followed * by %ds, %es, %fs and %gs to capture a 'struct regs' on the stack. * Then the kernel sets %ds, %es and %gs to kernel selectors, and finally * extracts %efl and puts it into r_efl (which happens to live at the offset * that was copied into). Note that the value in r_efl has * the IF (interrupt enable) flag turned on. (The int instruction into the * interrupt gate does essentially the same thing, only instead of * we get eflags - see comment above.) * * In the sysenter case, things are a lot more primitive. * * The caller in userland has arranged that: * * - %eax contains the syscall number * - %ecx contains the user %esp * - %edx contains the return %eip * - the user stack contains the args to the syscall * * e.g. * * mov $SYS_callnum, %eax * mov $1f, %edx / return %eip * mov %esp, %ecx / return %esp * sysenter * 1: * * Hardware and (privileged) initialization code have arranged that by * the time the sysenter instructions completes: * * - %eip is pointing to sys_sysenter (below). * - %cs and %ss are set to kernel text and stack (data) selectors. * - %esp is pointing at the lwp's stack * - Interrupts have been disabled. * * The task for the sysenter handler is: * * - recreate the same regs structure on the stack and the same * kernel state as if we'd come in on an lcall * - do the normal work of a syscall * - execute the system call epilogue, use sysexit to return to userland. * * Note that we are unable to return both "rvals" to userland with this * call, as %edx is used by the sysexit instruction. * * One final complication in this routine is its interaction with * single-stepping in a debugger. For most of the system call mechanisms, * the CPU automatically clears the single-step flag before we enter the * kernel. The sysenter mechanism does not clear the flag, so a user * single-stepping through a libc routine may suddenly find him/herself * single-stepping through the kernel. To detect this, kmdb compares the * trap %pc to the [brand_]sys_enter addresses on each single-step trap. * If it finds that we have single-stepped to a sysenter entry point, it * explicitly clears the flag and executes the sys_sysenter routine. * * One final complication in this final complication is the fact that we * have two different entry points for sysenter: brand_sys_sysenter and * sys_sysenter. If we enter at brand_sys_sysenter and start single-stepping * through the kernel with kmdb, we will eventually hit the instruction at * sys_sysenter. kmdb cannot distinguish between that valid single-step * and the undesirable one mentioned above. To avoid this situation, we * simply add a jump over the instruction at sys_sysenter to make it * impossible to single-step to it. */ #if defined(__lint) void sys_sysenter() {} #else /* __lint */ ENTRY_NP(brand_sys_sysenter) pushl %edx BRAND_CALLBACK(BRAND_CB_SYSENTER) popl %edx /* * Jump over sys_sysenter to allow single-stepping as described * above. */ ja 1f ALTENTRY(sys_sysenter) nop 1: / / do what the call gate would've done to the stack .. / pushl $UDS_SEL / (really %ss, but it's the same ..) pushl %ecx / userland makes this a copy of %esp pushfl orl $PS_IE, (%esp) / turn interrupts on when we return to user pushl $UCS_SEL pushl %edx / userland makes this a copy of %eip / / done. finish building the stack frame / subl $8, %esp / leave space for ERR and TRAPNO SYSENTER_PUSH #ifdef TRAPTRACE TRACE_PTR(%edi, %ebx, %ebx, %ecx, $TT_SYSENTER) / uses labels 8 and 9 TRACE_REGS(%edi, %esp, %ebx, %ecx) / uses label 9 pushl %eax TRACE_STAMP(%edi) / clobbers %eax, %edx, uses label 9 popl %eax movl %eax, TTR_SYSNUM(%edi) #endif movl %esp, %ebp CPU_STATS_SYS_SYSCALL_INC ENABLE_INTR_FLAGS pushl %eax / preserve across mstate call MSTATE_TRANSITION(LMS_USER, LMS_SYSTEM) popl %eax movl %gs:CPU_THREAD, %ebx ASSERT_LWPTOREGS(%ebx, %esp) CHECK_PRESYS_NE(%ebx, %eax) jne _full_syscall_presys SIMPLE_SYSCALL_PRESYS(%ebx, _syscall_fault) _sysenter_call: call *SY_CALLC(%eax) _sysenter_done: CHECK_POSTSYS_NE(%ebx, %ecx) jne _full_syscall_postsys SIMPLE_SYSCALL_POSTSYS(%ebx, %cx) / / sysexit uses %edx to restore %eip, so we can't use it / to return a value, sigh. / movl %eax, REGOFF_EAX(%esp) / movl %edx, REGOFF_EDX(%esp) / Interrupts will be turned on by the 'sti' executed just before / sysexit. The following ensures that restoring the user's EFLAGS / doesn't enable interrupts too soon. andl $_BITNOT(PS_IE), REGOFF_EFL(%esp) MSTATE_TRANSITION(LMS_SYSTEM, LMS_USER) cli SYSCALL_POP popl %edx / sysexit: %edx -> %eip addl $4, %esp / get CS off the stack popfl / EFL popl %ecx / sysexit: %ecx -> %esp sti sysexit SET_SIZE(sys_sysenter) SET_SIZE(brand_sys_sysenter) #endif /* __lint */ #if defined(__lint) /* * System call via an int80. This entry point is only used by the Linux * application environment. Unlike the sysenter path, there is no default * action to take if no callback is registered for this process. */ void sys_int80() {} #else /* __lint */ ENTRY_NP(brand_sys_int80) BRAND_CALLBACK(BRAND_CB_INT80) ALTENTRY(sys_int80) /* * We hit an int80, but this process isn't of a brand with an int80 * handler. Bad process! Make it look as if the INT failed. * Modify %eip to point before the INT, push the expected error * code and fake a GP fault. * */ subl $2, (%esp) /* int insn 2-bytes */ pushl $_CONST(_MUL(T_INT80, GATE_DESC_SIZE) + 2) jmp gptrap / GP fault SET_SIZE(sys_int80) SET_SIZE(brand_sys_int80) /* * Declare a uintptr_t which covers the entire pc range of syscall * handlers for the stack walkers that need this. */ .align CPTRSIZE .globl _allsyscalls_size .type _allsyscalls_size, @object _allsyscalls_size: .NWORD . - _allsyscalls SET_SIZE(_allsyscalls_size) #endif /* __lint */ /* * These are the thread context handlers for lwps using sysenter/sysexit. */ #if defined(__lint) /*ARGSUSED*/ void sep_save(void *ksp) {} /*ARGSUSED*/ void sep_restore(void *ksp) {} #else /* __lint */ /* * setting this value to zero as we switch away causes the * stack-pointer-on-sysenter to be NULL, ensuring that we * don't silently corrupt another (preempted) thread stack * when running an lwp that (somehow) didn't get sep_restore'd */ ENTRY_NP(sep_save) xorl %edx, %edx xorl %eax, %eax movl $MSR_INTC_SEP_ESP, %ecx wrmsr ret SET_SIZE(sep_save) /* * Update the kernel stack pointer as we resume onto this cpu. */ ENTRY_NP(sep_restore) movl 4(%esp), %eax /* per-lwp kernel sp */ xorl %edx, %edx movl $MSR_INTC_SEP_ESP, %ecx wrmsr ret SET_SIZE(sep_restore) #endif /* __lint */ /* * Call syscall(). Called from trap() on watchpoint at lcall 0,7 */ #if defined(__lint) void watch_syscall(void) {} #else /* __lint */ ENTRY_NP(watch_syscall) movl %gs:CPU_THREAD, %ebx movl T_STACK(%ebx), %esp / switch to the thread stack movl REGOFF_EAX(%esp), %eax / recover original syscall# jmp _watch_do_syscall SET_SIZE(watch_syscall) #endif /* __lint */