/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #include #include #include #include #include #include #if defined(__xpv) #include uintptr_t xen_virt_start; pfn_t *mfn_to_pfn_mapping; #else /* !__xpv */ extern multiboot_header_t mb_header; extern int have_cpuid(void); #endif /* !__xpv */ #include #include #include #include #include "dboot_asm.h" #include "dboot_printf.h" #include "dboot_xboot.h" #include "dboot_elfload.h" /* * This file contains code that runs to transition us from either a multiboot * compliant loader (32 bit non-paging) or a XPV domain loader to * regular kernel execution. Its task is to setup the kernel memory image * and page tables. * * The code executes as: * - 32 bits under GRUB (for 32 or 64 bit Solaris) * - a 32 bit program for the 32-bit PV hypervisor * - a 64 bit program for the 64-bit PV hypervisor (at least for now) * * Under the PV hypervisor, we must create mappings for any memory beyond the * initial start of day allocation (such as the kernel itself). * * When on the metal, the mapping between maddr_t and paddr_t is 1:1. * Since we are running in real mode, so all such memory is accessible. */ /* * Standard bits used in PTE (page level) and PTP (internal levels) */ x86pte_t ptp_bits = PT_VALID | PT_REF | PT_WRITABLE | PT_USER; x86pte_t pte_bits = PT_VALID | PT_REF | PT_WRITABLE | PT_MOD | PT_NOCONSIST; /* * This is the target addresses (physical) where the kernel text and data * nucleus pages will be unpacked. On the hypervisor this is actually a * virtual address. */ paddr_t ktext_phys; uint32_t ksize = 2 * FOUR_MEG; /* kernel nucleus is 8Meg */ static uint64_t target_kernel_text; /* value to use for KERNEL_TEXT */ /* * The stack is setup in assembler before entering startup_kernel() */ char stack_space[STACK_SIZE]; /* * Used to track physical memory allocation */ static paddr_t next_avail_addr = 0; #if defined(__xpv) /* * Additional information needed for hypervisor memory allocation. * Only memory up to scratch_end is mapped by page tables. * mfn_base is the start of the hypervisor virtual image. It's ONE_GIG, so * to derive a pfn from a pointer, you subtract mfn_base. */ static paddr_t scratch_end = 0; /* we can't write all of mem here */ static paddr_t mfn_base; /* addr corresponding to mfn_list[0] */ start_info_t *xen_info; #else /* __xpv */ /* * If on the metal, then we have a multiboot loader. */ multiboot_info_t *mb_info; #endif /* __xpv */ /* * This contains information passed to the kernel */ struct xboot_info boot_info[2]; /* extra space to fix alignement for amd64 */ struct xboot_info *bi; /* * Page table and memory stuff. */ static paddr_t max_mem; /* maximum memory address */ /* * Information about processor MMU */ int amd64_support = 0; int largepage_support = 0; int pae_support = 0; int pge_support = 0; int NX_support = 0; /* * Low 32 bits of kernel entry address passed back to assembler. * When running a 64 bit kernel, the high 32 bits are 0xffffffff. */ uint32_t entry_addr_low; /* * Memlists for the kernel. We shouldn't need a lot of these. */ #define MAX_MEMLIST (50) struct boot_memlist memlists[MAX_MEMLIST]; uint_t memlists_used = 0; struct boot_memlist pcimemlists[MAX_MEMLIST]; uint_t pcimemlists_used = 0; struct boot_memlist rsvdmemlists[MAX_MEMLIST]; uint_t rsvdmemlists_used = 0; #define MAX_MODULES (10) struct boot_modules modules[MAX_MODULES]; uint_t modules_used = 0; /* * Debugging macros */ uint_t prom_debug = 0; uint_t map_debug = 0; /* * Either hypervisor-specific or grub-specific code builds the initial * memlists. This code does the sort/merge/link for final use. */ static void sort_physinstall(void) { int i; #if !defined(__xpv) int j; struct boot_memlist tmp; /* * Now sort the memlists, in case they weren't in order. * Yeah, this is a bubble sort; small, simple and easy to get right. */ DBG_MSG("Sorting phys-installed list\n"); for (j = memlists_used - 1; j > 0; --j) { for (i = 0; i < j; ++i) { if (memlists[i].addr < memlists[i + 1].addr) continue; tmp = memlists[i]; memlists[i] = memlists[i + 1]; memlists[i + 1] = tmp; } } /* * Merge any memlists that don't have holes between them. */ for (i = 0; i <= memlists_used - 1; ++i) { if (memlists[i].addr + memlists[i].size != memlists[i + 1].addr) continue; if (prom_debug) dboot_printf( "merging mem segs %" PRIx64 "...%" PRIx64 " w/ %" PRIx64 "...%" PRIx64 "\n", memlists[i].addr, memlists[i].addr + memlists[i].size, memlists[i + 1].addr, memlists[i + 1].addr + memlists[i + 1].size); memlists[i].size += memlists[i + 1].size; for (j = i + 1; j < memlists_used - 1; ++j) memlists[j] = memlists[j + 1]; --memlists_used; DBG(memlists_used); --i; /* after merging we need to reexamine, so do this */ } #endif /* __xpv */ if (prom_debug) { dboot_printf("\nFinal memlists:\n"); for (i = 0; i < memlists_used; ++i) { dboot_printf("\t%d: addr=%" PRIx64 " size=%" PRIx64 "\n", i, memlists[i].addr, memlists[i].size); } } /* * link together the memlists with native size pointers */ memlists[0].next = 0; memlists[0].prev = 0; for (i = 1; i < memlists_used; ++i) { memlists[i].prev = (native_ptr_t)(uintptr_t)(memlists + i - 1); memlists[i].next = 0; memlists[i - 1].next = (native_ptr_t)(uintptr_t)(memlists + i); } bi->bi_phys_install = (native_ptr_t)(uintptr_t)memlists; DBG(bi->bi_phys_install); } /* * build bios reserved memlists */ static void build_rsvdmemlists(void) { int i; rsvdmemlists[0].next = 0; rsvdmemlists[0].prev = 0; for (i = 1; i < rsvdmemlists_used; ++i) { rsvdmemlists[i].prev = (native_ptr_t)(uintptr_t)(rsvdmemlists + i - 1); rsvdmemlists[i].next = 0; rsvdmemlists[i - 1].next = (native_ptr_t)(uintptr_t)(rsvdmemlists + i); } bi->bi_rsvdmem = (native_ptr_t)(uintptr_t)rsvdmemlists; DBG(bi->bi_rsvdmem); } #if defined(__xpv) /* * halt on the hypervisor after a delay to drain console output */ void dboot_halt(void) { uint_t i = 10000; while (--i) (void) HYPERVISOR_yield(); (void) HYPERVISOR_shutdown(SHUTDOWN_poweroff); } /* * From a machine address, find the corresponding pseudo-physical address. * Pseudo-physical address are contiguous and run from mfn_base in each VM. * Machine addresses are the real underlying hardware addresses. * These are needed for page table entries. Note that this routine is * poorly protected. A bad value of "ma" will cause a page fault. */ paddr_t ma_to_pa(maddr_t ma) { ulong_t pgoff = ma & MMU_PAGEOFFSET; ulong_t pfn = mfn_to_pfn_mapping[mmu_btop(ma)]; paddr_t pa; if (pfn >= xen_info->nr_pages) return (-(paddr_t)1); pa = mfn_base + mmu_ptob((paddr_t)pfn) + pgoff; #ifdef DEBUG if (ma != pa_to_ma(pa)) dboot_printf("ma_to_pa(%" PRIx64 ") got %" PRIx64 ", " "pa_to_ma() says %" PRIx64 "\n", ma, pa, pa_to_ma(pa)); #endif return (pa); } /* * From a pseudo-physical address, find the corresponding machine address. */ maddr_t pa_to_ma(paddr_t pa) { pfn_t pfn; ulong_t mfn; pfn = mmu_btop(pa - mfn_base); if (pa < mfn_base || pfn >= xen_info->nr_pages) dboot_panic("pa_to_ma(): illegal address 0x%lx", (ulong_t)pa); mfn = ((ulong_t *)xen_info->mfn_list)[pfn]; #ifdef DEBUG if (mfn_to_pfn_mapping[mfn] != pfn) dboot_printf("pa_to_ma(pfn=%lx) got %lx ma_to_pa() says %lx\n", pfn, mfn, mfn_to_pfn_mapping[mfn]); #endif return (mfn_to_ma(mfn) | (pa & MMU_PAGEOFFSET)); } #endif /* __xpv */ x86pte_t get_pteval(paddr_t table, uint_t index) { if (pae_support) return (((x86pte_t *)(uintptr_t)table)[index]); return (((x86pte32_t *)(uintptr_t)table)[index]); } /*ARGSUSED*/ void set_pteval(paddr_t table, uint_t index, uint_t level, x86pte_t pteval) { #ifdef __xpv mmu_update_t t; maddr_t mtable = pa_to_ma(table); int retcnt; t.ptr = (mtable + index * pte_size) | MMU_NORMAL_PT_UPDATE; t.val = pteval; if (HYPERVISOR_mmu_update(&t, 1, &retcnt, DOMID_SELF) || retcnt != 1) dboot_panic("HYPERVISOR_mmu_update() failed"); #else /* __xpv */ uintptr_t tab_addr = (uintptr_t)table; if (pae_support) ((x86pte_t *)tab_addr)[index] = pteval; else ((x86pte32_t *)tab_addr)[index] = (x86pte32_t)pteval; if (level == top_level && level == 2) reload_cr3(); #endif /* __xpv */ } paddr_t make_ptable(x86pte_t *pteval, uint_t level) { paddr_t new_table = (paddr_t)(uintptr_t)mem_alloc(MMU_PAGESIZE); if (level == top_level && level == 2) *pteval = pa_to_ma((uintptr_t)new_table) | PT_VALID; else *pteval = pa_to_ma((uintptr_t)new_table) | ptp_bits; #ifdef __xpv /* Remove write permission to the new page table. */ if (HYPERVISOR_update_va_mapping(new_table, *pteval & ~(x86pte_t)PT_WRITABLE, UVMF_INVLPG | UVMF_LOCAL)) dboot_panic("HYP_update_va_mapping error"); #endif if (map_debug) dboot_printf("new page table lvl=%d paddr=0x%lx ptp=0x%" PRIx64 "\n", level, (ulong_t)new_table, *pteval); return (new_table); } x86pte_t * map_pte(paddr_t table, uint_t index) { return ((x86pte_t *)(uintptr_t)(table + index * pte_size)); } /* * dump out the contents of page tables... */ static void dump_tables(void) { uint_t save_index[4]; /* for recursion */ char *save_table[4]; /* for recursion */ uint_t l; uint64_t va; uint64_t pgsize; int index; int i; x86pte_t pteval; char *table; static char *tablist = "\t\t\t"; char *tabs = tablist + 3 - top_level; uint_t pa, pa1; #if !defined(__xpv) #define maddr_t paddr_t #endif /* !__xpv */ dboot_printf("Finished pagetables:\n"); table = (char *)(uintptr_t)top_page_table; l = top_level; va = 0; for (index = 0; index < ptes_per_table; ++index) { pgsize = 1ull << shift_amt[l]; if (pae_support) pteval = ((x86pte_t *)table)[index]; else pteval = ((x86pte32_t *)table)[index]; if (pteval == 0) goto next_entry; dboot_printf("%s %p[0x%x] = %" PRIx64 ", va=%" PRIx64, tabs + l, (void *)table, index, (uint64_t)pteval, va); pa = ma_to_pa(pteval & MMU_PAGEMASK); dboot_printf(" physaddr=%x\n", pa); /* * Don't try to walk hypervisor private pagetables */ if ((l > 1 || (l == 1 && (pteval & PT_PAGESIZE) == 0))) { save_table[l] = table; save_index[l] = index; --l; index = -1; table = (char *)(uintptr_t) ma_to_pa(pteval & MMU_PAGEMASK); goto recursion; } /* * shorten dump for consecutive mappings */ for (i = 1; index + i < ptes_per_table; ++i) { if (pae_support) pteval = ((x86pte_t *)table)[index + i]; else pteval = ((x86pte32_t *)table)[index + i]; if (pteval == 0) break; pa1 = ma_to_pa(pteval & MMU_PAGEMASK); if (pa1 != pa + i * pgsize) break; } if (i > 2) { dboot_printf("%s...\n", tabs + l); va += pgsize * (i - 2); index += i - 2; } next_entry: va += pgsize; if (l == 3 && index == 256) /* VA hole */ va = 0xffff800000000000ull; recursion: ; } if (l < top_level) { ++l; index = save_index[l]; table = save_table[l]; goto recursion; } } /* * Add a mapping for the machine page at the given virtual address. */ static void map_ma_at_va(maddr_t ma, native_ptr_t va, uint_t level) { x86pte_t *ptep; x86pte_t pteval; pteval = ma | pte_bits; if (level > 0) pteval |= PT_PAGESIZE; if (va >= target_kernel_text && pge_support) pteval |= PT_GLOBAL; if (map_debug && ma != va) dboot_printf("mapping ma=0x%" PRIx64 " va=0x%" PRIx64 " pte=0x%" PRIx64 " l=%d\n", (uint64_t)ma, (uint64_t)va, pteval, level); #if defined(__xpv) /* * see if we can avoid find_pte() on the hypervisor */ if (HYPERVISOR_update_va_mapping(va, pteval, UVMF_INVLPG | UVMF_LOCAL) == 0) return; #endif /* * Find the pte that will map this address. This creates any * missing intermediate level page tables */ ptep = find_pte(va, NULL, level, 0); /* * When paravirtualized, we must use hypervisor calls to modify the * PTE, since paging is active. On real hardware we just write to * the pagetables which aren't in use yet. */ #if defined(__xpv) ptep = ptep; /* shut lint up */ if (HYPERVISOR_update_va_mapping(va, pteval, UVMF_INVLPG | UVMF_LOCAL)) dboot_panic("mmu_update failed-map_pa_at_va va=0x%" PRIx64 " l=%d ma=0x%" PRIx64 ", pte=0x%" PRIx64 "", (uint64_t)va, level, (uint64_t)ma, pteval); #else if (va < 1024 * 1024) pteval |= PT_NOCACHE; /* for video RAM */ if (pae_support) *ptep = pteval; else *((x86pte32_t *)ptep) = (x86pte32_t)pteval; #endif } /* * Add a mapping for the physical page at the given virtual address. */ static void map_pa_at_va(paddr_t pa, native_ptr_t va, uint_t level) { map_ma_at_va(pa_to_ma(pa), va, level); } /* * This is called to remove start..end from the * possible range of PCI addresses. */ const uint64_t pci_lo_limit = 0x00100000ul; const uint64_t pci_hi_limit = 0xfff00000ul; static void exclude_from_pci(uint64_t start, uint64_t end) { int i; int j; struct boot_memlist *ml; for (i = 0; i < pcimemlists_used; ++i) { ml = &pcimemlists[i]; /* delete the entire range? */ if (start <= ml->addr && ml->addr + ml->size <= end) { --pcimemlists_used; for (j = i; j < pcimemlists_used; ++j) pcimemlists[j] = pcimemlists[j + 1]; --i; /* to revisit the new one at this index */ } /* split a range? */ else if (ml->addr < start && end < ml->addr + ml->size) { ++pcimemlists_used; if (pcimemlists_used > MAX_MEMLIST) dboot_panic("too many pcimemlists"); for (j = pcimemlists_used - 1; j > i; --j) pcimemlists[j] = pcimemlists[j - 1]; ml->size = start - ml->addr; ++ml; ml->size = (ml->addr + ml->size) - end; ml->addr = end; ++i; /* skip on to next one */ } /* cut memory off the start? */ else if (ml->addr < end && end < ml->addr + ml->size) { ml->size -= end - ml->addr; ml->addr = end; } /* cut memory off the end? */ else if (ml->addr <= start && start < ml->addr + ml->size) { ml->size = start - ml->addr; } } } /* * Xen strips the size field out of the mb_memory_map_t, see struct e820entry * definition in Xen source. */ #ifdef __xpv typedef struct { uint32_t base_addr_low; uint32_t base_addr_high; uint32_t length_low; uint32_t length_high; uint32_t type; } mmap_t; #else typedef mb_memory_map_t mmap_t; #endif static void build_pcimemlists(mmap_t *mem, int num) { mmap_t *mmap; uint64_t page_offset = MMU_PAGEOFFSET; /* needs to be 64 bits */ uint64_t start; uint64_t end; int i; /* * initialize */ pcimemlists[0].addr = pci_lo_limit; pcimemlists[0].size = pci_hi_limit - pci_lo_limit; pcimemlists_used = 1; /* * Fill in PCI memlists. */ for (mmap = mem, i = 0; i < num; ++i, ++mmap) { start = ((uint64_t)mmap->base_addr_high << 32) + mmap->base_addr_low; end = start + ((uint64_t)mmap->length_high << 32) + mmap->length_low; if (prom_debug) dboot_printf("\ttype: %d %" PRIx64 "..%" PRIx64 "\n", mmap->type, start, end); /* * page align start and end */ start = (start + page_offset) & ~page_offset; end &= ~page_offset; if (end <= start) continue; exclude_from_pci(start, end); } /* * Finish off the pcimemlist */ if (prom_debug) { for (i = 0; i < pcimemlists_used; ++i) { dboot_printf("pcimemlist entry 0x%" PRIx64 "..0x%" PRIx64 "\n", pcimemlists[i].addr, pcimemlists[i].addr + pcimemlists[i].size); } } pcimemlists[0].next = 0; pcimemlists[0].prev = 0; for (i = 1; i < pcimemlists_used; ++i) { pcimemlists[i].prev = (native_ptr_t)(uintptr_t)(pcimemlists + i - 1); pcimemlists[i].next = 0; pcimemlists[i - 1].next = (native_ptr_t)(uintptr_t)(pcimemlists + i); } bi->bi_pcimem = (native_ptr_t)(uintptr_t)pcimemlists; DBG(bi->bi_pcimem); } #if defined(__xpv) /* * Initialize memory allocator stuff from hypervisor-supplied start info. * * There is 512KB of scratch area after the boot stack page. * We'll use that for everything except the kernel nucleus pages which are too * big to fit there and are allocated last anyway. */ #define MAXMAPS 100 static mmap_t map_buffer[MAXMAPS]; static void init_mem_alloc(void) { int local; /* variables needed to find start region */ paddr_t scratch_start; xen_memory_map_t map; DBG_MSG("Entered init_mem_alloc()\n"); /* * Free memory follows the stack. There's at least 512KB of scratch * space, rounded up to at least 2Mb alignment. That should be enough * for the page tables we'll need to build. The nucleus memory is * allocated last and will be outside the addressible range. We'll * switch to new page tables before we unpack the kernel */ scratch_start = RNDUP((paddr_t)(uintptr_t)&local, MMU_PAGESIZE); DBG(scratch_start); scratch_end = RNDUP((paddr_t)scratch_start + 512 * 1024, TWO_MEG); DBG(scratch_end); /* * For paranoia, leave some space between hypervisor data and ours. * Use 500 instead of 512. */ next_avail_addr = scratch_end - 500 * 1024; DBG(next_avail_addr); /* * The domain builder gives us at most 1 module */ DBG(xen_info->mod_len); if (xen_info->mod_len > 0) { DBG(xen_info->mod_start); modules[0].bm_addr = xen_info->mod_start; modules[0].bm_size = xen_info->mod_len; bi->bi_module_cnt = 1; bi->bi_modules = (native_ptr_t)modules; } else { bi->bi_module_cnt = 0; bi->bi_modules = NULL; } DBG(bi->bi_module_cnt); DBG(bi->bi_modules); DBG(xen_info->mfn_list); DBG(xen_info->nr_pages); max_mem = (paddr_t)xen_info->nr_pages << MMU_PAGESHIFT; DBG(max_mem); /* * Using pseudo-physical addresses, so only 1 memlist element */ memlists[0].addr = 0; DBG(memlists[0].addr); memlists[0].size = max_mem; DBG(memlists[0].size); memlists_used = 1; DBG(memlists_used); /* * finish building physinstall list */ sort_physinstall(); /* * build bios reserved memlists */ build_rsvdmemlists(); if (DOMAIN_IS_INITDOMAIN(xen_info)) { /* * build PCI Memory list */ map.nr_entries = MAXMAPS; /*LINTED: constant in conditional context*/ set_xen_guest_handle(map.buffer, map_buffer); if (HYPERVISOR_memory_op(XENMEM_machine_memory_map, &map) != 0) dboot_panic("getting XENMEM_machine_memory_map failed"); build_pcimemlists(map_buffer, map.nr_entries); } } #else /* !__xpv */ /* * During memory allocation, find the highest address not used yet. */ static void check_higher(paddr_t a) { if (a < next_avail_addr) return; next_avail_addr = RNDUP(a + 1, MMU_PAGESIZE); DBG(next_avail_addr); } /* * Walk through the module information finding the last used address. * The first available address will become the top level page table. * * We then build the phys_install memlist from the multiboot information. */ static void init_mem_alloc(void) { mb_memory_map_t *mmap; mb_module_t *mod; uint64_t start; uint64_t end; uint64_t page_offset = MMU_PAGEOFFSET; /* needs to be 64 bits */ extern char _end[]; int i; DBG_MSG("Entered init_mem_alloc()\n"); DBG((uintptr_t)mb_info); if (mb_info->mods_count > MAX_MODULES) { dboot_panic("Too many modules (%d) -- the maximum is %d.", mb_info->mods_count, MAX_MODULES); } /* * search the modules to find the last used address * we'll build the module list while we're walking through here */ DBG_MSG("\nFinding Modules\n"); check_higher((paddr_t)(uintptr_t)&_end); for (mod = (mb_module_t *)(mb_info->mods_addr), i = 0; i < mb_info->mods_count; ++mod, ++i) { if (prom_debug) { dboot_printf("\tmodule #%d: %s at: 0x%lx, len 0x%lx\n", i, (char *)(mod->mod_name), (ulong_t)mod->mod_start, (ulong_t)mod->mod_end); } modules[i].bm_addr = mod->mod_start; if (mod->mod_start > mod->mod_end) { dboot_panic("module[%d]: Invalid module start address " "(0x%llx)", i, (uint64_t)mod->mod_start); } modules[i].bm_size = mod->mod_end - mod->mod_start; check_higher(mod->mod_end); } bi->bi_modules = (native_ptr_t)(uintptr_t)modules; DBG(bi->bi_modules); bi->bi_module_cnt = mb_info->mods_count; DBG(bi->bi_module_cnt); /* * Walk through the memory map from multiboot and build our memlist * structures. Note these will have native format pointers. */ DBG_MSG("\nFinding Memory Map\n"); DBG(mb_info->flags); max_mem = 0; if (mb_info->flags & 0x40) { int cnt = 0; DBG(mb_info->mmap_addr); DBG(mb_info->mmap_length); check_higher(mb_info->mmap_addr + mb_info->mmap_length); for (mmap = (mb_memory_map_t *)mb_info->mmap_addr; (uint32_t)mmap < mb_info->mmap_addr + mb_info->mmap_length; mmap = (mb_memory_map_t *)((uint32_t)mmap + mmap->size + sizeof (mmap->size))) { ++cnt; start = ((uint64_t)mmap->base_addr_high << 32) + mmap->base_addr_low; end = start + ((uint64_t)mmap->length_high << 32) + mmap->length_low; if (prom_debug) dboot_printf("\ttype: %d %" PRIx64 "..%" PRIx64 "\n", mmap->type, start, end); /* * page align start and end */ start = (start + page_offset) & ~page_offset; end &= ~page_offset; if (end <= start) continue; /* * only type 1 is usable RAM */ switch (mmap->type) { case 1: if (end > max_mem) max_mem = end; memlists[memlists_used].addr = start; memlists[memlists_used].size = end - start; ++memlists_used; if (memlists_used > MAX_MEMLIST) dboot_panic("too many memlists"); break; case 2: rsvdmemlists[rsvdmemlists_used].addr = start; rsvdmemlists[rsvdmemlists_used].size = end - start; ++rsvdmemlists_used; if (rsvdmemlists_used > MAX_MEMLIST) dboot_panic("too many rsvdmemlists"); break; default: continue; } } build_pcimemlists((mb_memory_map_t *)mb_info->mmap_addr, cnt); } else if (mb_info->flags & 0x01) { DBG(mb_info->mem_lower); memlists[memlists_used].addr = 0; memlists[memlists_used].size = mb_info->mem_lower * 1024; ++memlists_used; DBG(mb_info->mem_upper); memlists[memlists_used].addr = 1024 * 1024; memlists[memlists_used].size = mb_info->mem_upper * 1024; ++memlists_used; /* * Old platform - assume I/O space at the end of memory. */ pcimemlists[0].addr = (mb_info->mem_upper * 1024) + (1024 * 1024); pcimemlists[0].size = pci_hi_limit - pcimemlists[0].addr; pcimemlists[0].next = 0; pcimemlists[0].prev = 0; bi->bi_pcimem = (native_ptr_t)(uintptr_t)pcimemlists; DBG(bi->bi_pcimem); } else { dboot_panic("No memory info from boot loader!!!"); } check_higher(bi->bi_cmdline); /* * finish processing the physinstall list */ sort_physinstall(); /* * build bios reserved mem lists */ build_rsvdmemlists(); } #endif /* !__xpv */ /* * Simple memory allocator, allocates aligned physical memory. * Note that startup_kernel() only allocates memory, never frees. * Memory usage just grows in an upward direction. */ static void * do_mem_alloc(uint32_t size, uint32_t align) { uint_t i; uint64_t best; uint64_t start; uint64_t end; /* * make sure size is a multiple of pagesize */ size = RNDUP(size, MMU_PAGESIZE); next_avail_addr = RNDUP(next_avail_addr, align); /* * XXPV fixme joe * * a really large bootarchive that causes you to run out of memory * may cause this to blow up */ /* LINTED E_UNEXPECTED_UINT_PROMOTION */ best = (uint64_t)-size; for (i = 0; i < memlists_used; ++i) { start = memlists[i].addr; #if defined(__xpv) start += mfn_base; #endif end = start + memlists[i].size; /* * did we find the desired address? */ if (start <= next_avail_addr && next_avail_addr + size <= end) { best = next_avail_addr; goto done; } /* * if not is this address the best so far? */ if (start > next_avail_addr && start < best && RNDUP(start, align) + size <= end) best = RNDUP(start, align); } /* * We didn't find exactly the address we wanted, due to going off the * end of a memory region. Return the best found memory address. */ done: next_avail_addr = best + size; #if defined(__xpv) if (next_avail_addr > scratch_end) dboot_panic("Out of mem next_avail: 0x%lx, scratch_end: " "0x%lx", (ulong_t)next_avail_addr, (ulong_t)scratch_end); #endif (void) memset((void *)(uintptr_t)best, 0, size); return ((void *)(uintptr_t)best); } void * mem_alloc(uint32_t size) { return (do_mem_alloc(size, MMU_PAGESIZE)); } /* * Build page tables to map all of memory used so far as well as the kernel. */ static void build_page_tables(void) { uint32_t psize; uint32_t level; uint32_t off; uint64_t start; #if !defined(__xpv) uint32_t i; uint64_t end; #endif /* __xpv */ /* * If we're on metal, we need to create the top level pagetable. */ #if defined(__xpv) top_page_table = (paddr_t)(uintptr_t)xen_info->pt_base; #else /* __xpv */ top_page_table = (paddr_t)(uintptr_t)mem_alloc(MMU_PAGESIZE); #endif /* __xpv */ DBG((uintptr_t)top_page_table); /* * Determine if we'll use large mappings for kernel, then map it. */ if (largepage_support) { psize = lpagesize; level = 1; } else { psize = MMU_PAGESIZE; level = 0; } DBG_MSG("Mapping kernel\n"); DBG(ktext_phys); DBG(target_kernel_text); DBG(ksize); DBG(psize); for (off = 0; off < ksize; off += psize) map_pa_at_va(ktext_phys + off, target_kernel_text + off, level); /* * The kernel will need a 1 page window to work with page tables */ bi->bi_pt_window = (uintptr_t)mem_alloc(MMU_PAGESIZE); DBG(bi->bi_pt_window); bi->bi_pte_to_pt_window = (uintptr_t)find_pte(bi->bi_pt_window, NULL, 0, 0); DBG(bi->bi_pte_to_pt_window); #if defined(__xpv) if (!DOMAIN_IS_INITDOMAIN(xen_info)) { /* If this is a domU we're done. */ DBG_MSG("\nPage tables constructed\n"); return; } #endif /* __xpv */ /* * We need 1:1 mappings for the lower 1M of memory to access * BIOS tables used by a couple of drivers during boot. * * The following code works because our simple memory allocator * only grows usage in an upwards direction. * * Note that by this point in boot some mappings for low memory * may already exist because we've already accessed device in low * memory. (Specifically the video frame buffer and keyboard * status ports.) If we're booting on raw hardware then GRUB * created these mappings for us. If we're booting under a * hypervisor then we went ahead and remapped these devices into * memory allocated within dboot itself. */ if (map_debug) dboot_printf("1:1 map pa=0..1Meg\n"); for (start = 0; start < 1024 * 1024; start += MMU_PAGESIZE) { #if defined(__xpv) map_ma_at_va(start, start, 0); #else /* __xpv */ map_pa_at_va(start, start, 0); #endif /* __xpv */ } #if !defined(__xpv) for (i = 0; i < memlists_used; ++i) { start = memlists[i].addr; end = start + memlists[i].size; if (map_debug) dboot_printf("1:1 map pa=%" PRIx64 "..%" PRIx64 "\n", start, end); while (start < end && start < next_avail_addr) { map_pa_at_va(start, start, 0); start += MMU_PAGESIZE; } } #endif /* !__xpv */ DBG_MSG("\nPage tables constructed\n"); } #define NO_MULTIBOOT \ "multiboot is no longer used to boot the Solaris Operating System.\n\ The grub entry should be changed to:\n\ kernel$ /platform/i86pc/kernel/$ISADIR/unix\n\ module$ /platform/i86pc/$ISADIR/boot_archive\n\ See http://illumos.org/msg/SUNOS-8000-AK for details.\n" /* * startup_kernel has a pretty simple job. It builds pagetables which reflect * 1:1 mappings for all memory in use. It then also adds mappings for * the kernel nucleus at virtual address of target_kernel_text using large page * mappings. The page table pages are also accessible at 1:1 mapped * virtual addresses. */ /*ARGSUSED*/ void startup_kernel(void) { char *cmdline; uintptr_t addr; #if defined(__xpv) physdev_set_iopl_t set_iopl; #endif /* __xpv */ /* * At this point we are executing in a 32 bit real mode. */ #if defined(__xpv) cmdline = (char *)xen_info->cmd_line; #else /* __xpv */ cmdline = (char *)mb_info->cmdline; #endif /* __xpv */ prom_debug = (strstr(cmdline, "prom_debug") != NULL); map_debug = (strstr(cmdline, "map_debug") != NULL); #if defined(__xpv) /* * For dom0, before we initialize the console subsystem we'll * need to enable io operations, so set I/O priveldge level to 1. */ if (DOMAIN_IS_INITDOMAIN(xen_info)) { set_iopl.iopl = 1; (void) HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl); } #endif /* __xpv */ bcons_init(cmdline); DBG_MSG("\n\nSolaris prekernel set: "); DBG_MSG(cmdline); DBG_MSG("\n"); if (strstr(cmdline, "multiboot") != NULL) { dboot_panic(NO_MULTIBOOT); } /* * boot info must be 16 byte aligned for 64 bit kernel ABI */ addr = (uintptr_t)boot_info; addr = (addr + 0xf) & ~0xf; bi = (struct xboot_info *)addr; DBG((uintptr_t)bi); bi->bi_cmdline = (native_ptr_t)(uintptr_t)cmdline; /* * Need correct target_kernel_text value */ #if defined(_BOOT_TARGET_amd64) target_kernel_text = KERNEL_TEXT_amd64; #elif defined(__xpv) target_kernel_text = KERNEL_TEXT_i386_xpv; #else target_kernel_text = KERNEL_TEXT_i386; #endif DBG(target_kernel_text); #if defined(__xpv) /* * XXPV Derive this stuff from CPUID / what the hypervisor has enabled */ #if defined(_BOOT_TARGET_amd64) /* * 64-bit hypervisor. */ amd64_support = 1; pae_support = 1; #else /* _BOOT_TARGET_amd64 */ /* * See if we are running on a PAE Hypervisor */ { xen_capabilities_info_t caps; if (HYPERVISOR_xen_version(XENVER_capabilities, &caps) != 0) dboot_panic("HYPERVISOR_xen_version(caps) failed"); caps[sizeof (caps) - 1] = 0; if (prom_debug) dboot_printf("xen capabilities %s\n", caps); if (strstr(caps, "x86_32p") != NULL) pae_support = 1; } #endif /* _BOOT_TARGET_amd64 */ { xen_platform_parameters_t p; if (HYPERVISOR_xen_version(XENVER_platform_parameters, &p) != 0) dboot_panic("HYPERVISOR_xen_version(parms) failed"); DBG(p.virt_start); mfn_to_pfn_mapping = (pfn_t *)(xen_virt_start = p.virt_start); } /* * The hypervisor loads stuff starting at 1Gig */ mfn_base = ONE_GIG; DBG(mfn_base); /* * enable writable page table mode for the hypervisor */ if (HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_writable_pagetables) < 0) dboot_panic("HYPERVISOR_vm_assist(writable_pagetables) failed"); /* * check for NX support */ if (pae_support) { uint32_t eax = 0x80000000; uint32_t edx = get_cpuid_edx(&eax); if (eax >= 0x80000001) { eax = 0x80000001; edx = get_cpuid_edx(&eax); if (edx & CPUID_AMD_EDX_NX) NX_support = 1; } } #if !defined(_BOOT_TARGET_amd64) /* * The 32-bit hypervisor uses segmentation to protect itself from * guests. This means when a guest attempts to install a flat 4GB * code or data descriptor the 32-bit hypervisor will protect itself * by silently shrinking the segment such that if the guest attempts * any access where the hypervisor lives a #gp fault is generated. * The problem is that some applications expect a full 4GB flat * segment for their current thread pointer and will use negative * offset segment wrap around to access data. TLS support in linux * brand is one example of this. * * The 32-bit hypervisor can catch the #gp fault in these cases * and emulate the access without passing the #gp fault to the guest * but only if VMASST_TYPE_4gb_segments is explicitly turned on. * Seems like this should have been the default. * Either way, we want the hypervisor -- and not Solaris -- to deal * to deal with emulating these accesses. */ if (HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments) < 0) dboot_panic("HYPERVISOR_vm_assist(4gb_segments) failed"); #endif /* !_BOOT_TARGET_amd64 */ #else /* __xpv */ /* * use cpuid to enable MMU features */ if (have_cpuid()) { uint32_t eax, edx; eax = 1; edx = get_cpuid_edx(&eax); if (edx & CPUID_INTC_EDX_PSE) largepage_support = 1; if (edx & CPUID_INTC_EDX_PGE) pge_support = 1; if (edx & CPUID_INTC_EDX_PAE) pae_support = 1; eax = 0x80000000; edx = get_cpuid_edx(&eax); if (eax >= 0x80000001) { eax = 0x80000001; edx = get_cpuid_edx(&eax); if (edx & CPUID_AMD_EDX_LM) amd64_support = 1; if (edx & CPUID_AMD_EDX_NX) NX_support = 1; } } else { dboot_printf("cpuid not supported\n"); } #endif /* __xpv */ #if defined(_BOOT_TARGET_amd64) if (amd64_support == 0) dboot_panic("long mode not supported, rebooting"); else if (pae_support == 0) dboot_panic("long mode, but no PAE; rebooting"); #else /* * Allow the command line to over-ride use of PAE for 32 bit. */ if (strstr(cmdline, "disablePAE=true") != NULL) { pae_support = 0; NX_support = 0; amd64_support = 0; } #endif /* * initialize the simple memory allocator */ init_mem_alloc(); #if !defined(__xpv) && !defined(_BOOT_TARGET_amd64) /* * disable PAE on 32 bit h/w w/o NX and < 4Gig of memory */ if (max_mem < FOUR_GIG && NX_support == 0) pae_support = 0; #endif /* * configure mmu information */ if (pae_support) { shift_amt = shift_amt_pae; ptes_per_table = 512; pte_size = 8; lpagesize = TWO_MEG; #if defined(_BOOT_TARGET_amd64) top_level = 3; #else top_level = 2; #endif } else { pae_support = 0; NX_support = 0; shift_amt = shift_amt_nopae; ptes_per_table = 1024; pte_size = 4; lpagesize = FOUR_MEG; top_level = 1; } DBG(pge_support); DBG(NX_support); DBG(largepage_support); DBG(amd64_support); DBG(top_level); DBG(pte_size); DBG(ptes_per_table); DBG(lpagesize); #if defined(__xpv) ktext_phys = ONE_GIG; /* from UNIX Mapfile */ #else ktext_phys = FOUR_MEG; /* from UNIX Mapfile */ #endif #if !defined(__xpv) && defined(_BOOT_TARGET_amd64) /* * For grub, copy kernel bits from the ELF64 file to final place. */ DBG_MSG("\nAllocating nucleus pages.\n"); ktext_phys = (uintptr_t)do_mem_alloc(ksize, FOUR_MEG); if (ktext_phys == 0) dboot_panic("failed to allocate aligned kernel memory"); if (dboot_elfload64(mb_header.load_addr) != 0) dboot_panic("failed to parse kernel ELF image, rebooting"); #endif DBG(ktext_phys); /* * Allocate page tables. */ build_page_tables(); /* * return to assembly code to switch to running kernel */ entry_addr_low = (uint32_t)target_kernel_text; DBG(entry_addr_low); bi->bi_use_largepage = largepage_support; bi->bi_use_pae = pae_support; bi->bi_use_pge = pge_support; bi->bi_use_nx = NX_support; #if defined(__xpv) bi->bi_next_paddr = next_avail_addr - mfn_base; DBG(bi->bi_next_paddr); bi->bi_next_vaddr = (native_ptr_t)next_avail_addr; DBG(bi->bi_next_vaddr); /* * unmap unused pages in start area to make them available for DMA */ while (next_avail_addr < scratch_end) { (void) HYPERVISOR_update_va_mapping(next_avail_addr, 0, UVMF_INVLPG | UVMF_LOCAL); next_avail_addr += MMU_PAGESIZE; } bi->bi_xen_start_info = (uintptr_t)xen_info; DBG((uintptr_t)HYPERVISOR_shared_info); bi->bi_shared_info = (native_ptr_t)HYPERVISOR_shared_info; bi->bi_top_page_table = (uintptr_t)top_page_table - mfn_base; #else /* __xpv */ bi->bi_next_paddr = next_avail_addr; DBG(bi->bi_next_paddr); bi->bi_next_vaddr = (uintptr_t)next_avail_addr; DBG(bi->bi_next_vaddr); bi->bi_mb_info = (uintptr_t)mb_info; bi->bi_top_page_table = (uintptr_t)top_page_table; #endif /* __xpv */ bi->bi_kseg_size = FOUR_MEG; DBG(bi->bi_kseg_size); #ifndef __xpv if (map_debug) dump_tables(); #endif DBG_MSG("\n\n*** DBOOT DONE -- back to asm to jump to kernel\n\n"); }