/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved. */ #ifndef _SMBSRV_SMB_H #define _SMBSRV_SMB_H /* * SMB definitions and interfaces, mostly defined in the SMB and CIFS specs. */ #ifdef _KERNEL #include #endif #include #include #include #include #include #include #include /* * Macintosh Extensions for CIFS */ #include /* * NT Installable File System (IFS) interface. */ #include #ifdef __cplusplus extern "C" { #endif /* * The msgbuf format and length of an SMB header. */ #define SMB_HEADER_DOS_FMT "Mbbbwbww10.wwww" #define SMB_HEADER_NT_FMT "Mblbww#c2.wwww" #define SMB_HEADER_LEN 32 #define SMB_SIG_SIZE 8 /* SMB signature size */ #define SMB_HEADER_ED_FMT "Mbbbwbww8c2.wwww" #define SMB_HEADER_ED_LEN (4+1+1+1+2+1+2+12+2+2+2+2) #define SMB_TRANSHDR_ED_FMT "wwwwb.wl2.wwwwb." #define SMB_TRANSHDR_ED_LEN (2+2+2+2+1+1+2+4+2+2+2+2+2+1+1) #define SMB_TRANSSHDR_ED_FMT "wwwwwwwww" #define SMB_TRANSSHDR_ED_LEN (2+2+2+2+2+2+2+2) #define SMB_TRANS2SHDR_ED_FMT "wwwwwwwww" #define SMB_TRANS2SHDR_ED_LEN (2+2+2+2+2+2+2+2+2) /* There is something wrong with this. Should be 38 bytes. It is 37 bytes */ #define SMB_NT_TRANSHDR_ED_FMT "b2.llllllllbw" #define SMB_NT_TRANSHDR_ED_LEN (1+2+4+4+4+4+4+4+4+4+1+2) /* * CIFS definition for the SMB header (CIFS Section 3.2). Note that the * pid_high field is not documented in the 1997 CIFS specificaction. This * is a decoded or memory-based definition, which may be padded to align * its elements on word boundaries. See smb_hdrbuf_t for the network * ready structure. */ typedef struct smb_hdr { uint8_t protocol[4]; uint8_t command; union { struct { uint8_t error_class; uint8_t reserved; uint16_t error; } dos_error; uint32_t ntstatus; } status; uint8_t flags; uint16_t flags2; uint16_t pid_high; union { uint16_t pad[5]; struct { uint16_t reserved; uint8_t security_sig[SMB_SIG_SIZE]; } extra; } extra; uint16_t tid; uint16_t pid; uint16_t uid; uint16_t mid; } smb_hdr_t; /* * Encoded or packed SMB header in network ready format. */ typedef struct smb_hdrbuf { uint8_t hdr[SMB_HEADER_LEN]; } smb_hdrbuf_t; /* * Protocol magic value as a 32-bit. This will be 0xff 0x53 0x4d 0x42 on * the wire. */ #define SMB_PROTOCOL_MAGIC 0x424d53ff /* * Time and date encoding (CIFS Section 3.6). The date is encoded such * that the year has a range of 0-119, which represents 1980-2099. The * month range is 1-12, and the day range is 1-31. */ typedef struct smb_date { uint16_t day : 5; uint16_t month : 4; uint16_t year : 7; } smb_date_t; /* * The hours range is 0-23, the minutes range is 0-59 and the two_sec * range is 0-29. */ typedef struct smb_time { uint16_t two_sec : 5; uint16_t minutes : 6; uint16_t hours : 5; } smb_time_t; /* * This is a 64-bit signed absolute time representing 100ns increments. * A positive value represents the absolute time since 1601AD. A * negative value represents a context specific relative time. */ typedef struct smb_time2 { uint32_t low_time; int32_t high_time; } smb_time2_t; /* * The number of seconds since Jan 1, 1970, 00:00:00.0. */ typedef uint32_t smb_utime_t; #define SMB_LM_NEGOTIATE_WORDCNT 13 #define SMB_NT_NEGOTIATE_WORDCNT 17 #define SMB_NAME83_EXTLEN 3 #define SMB_NAME83_BASELEN 8 #define SMB_NAME83_LEN 12 /* Share types */ #ifndef _SHARE_TYPES_DEFINED_ #define _SHARE_TYPES_DEFINED_ #define STYPE_DISKTREE 0x00000000 #define STYPE_PRINTQ 0x00000001 #define STYPE_DEVICE 0x00000002 #define STYPE_IPC 0x00000003 #define STYPE_MASK 0x0000000F #define STYPE_DFS 0x00000064 #define STYPE_HIDDEN 0x80000000 #define STYPE_SPECIAL 0x80000000 #endif /* _SHARE_TYPES_DEFINED_ */ #define STYPE_ISDSK(S) (((S) & STYPE_MASK) == STYPE_DISKTREE) #define STYPE_ISPRN(S) (((S) & STYPE_MASK) == STYPE_PRINTQ) #define STYPE_ISDEV(S) (((S) & STYPE_MASK) == STYPE_DEVICE) #define STYPE_ISIPC(S) (((S) & STYPE_MASK) == STYPE_IPC) /* * NtCreateAndX and NtTransactCreate creation flags: defined in CIFS * section 4.2.2 * * Creation Flag Name Value Description * ========================== ====== ================================== * NT_CREATE_REQUEST_OPLOCK 0x02 Level I oplock requested * NT_CREATE_REQUEST_OPBATCH 0x04 Batch oplock requested * NT_CREATE_OPEN_TARGET_DIR 0x08 Target for open is a directory */ #define NT_CREATE_FLAG_REQUEST_OPLOCK 0x02 #define NT_CREATE_FLAG_REQUEST_OPBATCH 0x04 #define NT_CREATE_FLAG_OPEN_TARGET_DIR 0x08 /* * Define the filter flags for NtNotifyChangeDirectoryFile */ #define FILE_NOTIFY_CHANGE_FILE_NAME 0x00000001 #define FILE_NOTIFY_CHANGE_DIR_NAME 0x00000002 #define FILE_NOTIFY_CHANGE_NAME 0x00000003 #define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x00000004 #define FILE_NOTIFY_CHANGE_SIZE 0x00000008 #define FILE_NOTIFY_CHANGE_LAST_WRITE 0x00000010 #define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x00000020 #define FILE_NOTIFY_CHANGE_CREATION 0x00000040 #define FILE_NOTIFY_CHANGE_EA 0x00000080 #define FILE_NOTIFY_CHANGE_SECURITY 0x00000100 #define FILE_NOTIFY_CHANGE_STREAM_NAME 0x00000200 #define FILE_NOTIFY_CHANGE_STREAM_SIZE 0x00000400 #define FILE_NOTIFY_CHANGE_STREAM_WRITE 0x00000800 #define FILE_NOTIFY_VALID_MASK 0x00000fff /* * Define the file action type codes for NtNotifyChangeDirectoryFile */ #define FILE_ACTION_ADDED 0x00000001 #define FILE_ACTION_REMOVED 0x00000002 #define FILE_ACTION_MODIFIED 0x00000003 #define FILE_ACTION_RENAMED_OLD_NAME 0x00000004 #define FILE_ACTION_RENAMED_NEW_NAME 0x00000005 #define FILE_ACTION_ADDED_STREAM 0x00000006 #define FILE_ACTION_REMOVED_STREAM 0x00000007 #define FILE_ACTION_MODIFIED_STREAM 0x00000008 /* Lock type flags */ #define LOCKING_ANDX_NORMAL_LOCK 0x00 #define LOCKING_ANDX_SHARED_LOCK 0x01 #define LOCKING_ANDX_OPLOCK_RELEASE 0x02 #define LOCKING_ANDX_CHANGE_LOCK_TYPE 0x04 #define LOCKING_ANDX_CANCEL_LOCK 0x08 #define LOCKING_ANDX_LARGE_FILES 0x10 #define SMB_COM_CREATE_DIRECTORY 0x00 #define SMB_COM_DELETE_DIRECTORY 0x01 #define SMB_COM_OPEN 0x02 #define SMB_COM_CREATE 0x03 #define SMB_COM_CLOSE 0x04 #define SMB_COM_FLUSH 0x05 #define SMB_COM_DELETE 0x06 #define SMB_COM_RENAME 0x07 #define SMB_COM_QUERY_INFORMATION 0x08 #define SMB_COM_SET_INFORMATION 0x09 #define SMB_COM_READ 0x0A #define SMB_COM_WRITE 0x0B #define SMB_COM_LOCK_BYTE_RANGE 0x0C #define SMB_COM_UNLOCK_BYTE_RANGE 0x0D #define SMB_COM_CREATE_TEMPORARY 0x0E #define SMB_COM_CREATE_NEW 0x0F #define SMB_COM_CHECK_DIRECTORY 0x10 #define SMB_COM_PROCESS_EXIT 0x11 #define SMB_COM_SEEK 0x12 #define SMB_COM_LOCK_AND_READ 0x13 #define SMB_COM_WRITE_AND_UNLOCK 0x14 #define SMB_COM_READ_RAW 0x1A #define SMB_COM_READ_MPX 0x1B #define SMB_COM_READ_MPX_SECONDARY 0x1C #define SMB_COM_WRITE_RAW 0x1D #define SMB_COM_WRITE_MPX 0x1E #define SMB_COM_WRITE_MPX_SECONDARY 0x1F #define SMB_COM_WRITE_COMPLETE 0x20 #define SMB_COM_SET_INFORMATION2 0x22 #define SMB_COM_QUERY_INFORMATION2 0x23 #define SMB_COM_LOCKING_ANDX 0x24 #define SMB_COM_TRANSACTION 0x25 #define SMB_COM_TRANSACTION_SECONDARY 0x26 #define SMB_COM_IOCTL 0x27 #define SMB_COM_IOCTL_SECONDARY 0x28 #define SMB_COM_COPY 0x29 #define SMB_COM_MOVE 0x2A #define SMB_COM_ECHO 0x2B #define SMB_COM_WRITE_AND_CLOSE 0x2C #define SMB_COM_OPEN_ANDX 0x2D #define SMB_COM_READ_ANDX 0x2E #define SMB_COM_WRITE_ANDX 0x2F #define SMB_COM_CLOSE_AND_TREE_DISC 0x31 #define SMB_COM_TRANSACTION2 0x32 #define SMB_COM_TRANSACTION2_SECONDARY 0x33 #define SMB_COM_FIND_CLOSE2 0x34 #define SMB_COM_FIND_NOTIFY_CLOSE 0x35 #define SMB_COM_TREE_CONNECT 0x70 #define SMB_COM_TREE_DISCONNECT 0x71 #define SMB_COM_NEGOTIATE 0x72 #define SMB_COM_SESSION_SETUP_ANDX 0x73 #define SMB_COM_LOGOFF_ANDX 0x74 #define SMB_COM_TREE_CONNECT_ANDX 0x75 #define SMB_COM_QUERY_INFORMATION_DISK 0x80 #define SMB_COM_SEARCH 0x81 #define SMB_COM_FIND 0x82 #define SMB_COM_FIND_UNIQUE 0x83 #define SMB_COM_FIND_CLOSE 0x84 #define SMB_COM_NT_TRANSACT 0xA0 #define SMB_COM_NT_TRANSACT_SECONDARY 0xA1 #define SMB_COM_NT_CREATE_ANDX 0xA2 #define SMB_COM_NT_CANCEL 0xA4 #define SMB_COM_OPEN_PRINT_FILE 0xC0 #define SMB_COM_WRITE_PRINT_FILE 0xC1 #define SMB_COM_CLOSE_PRINT_FILE 0xC2 #define SMB_COM_GET_PRINT_QUEUE 0xC3 #define SMB_COM_NUM 0x100 /* * Flags field of the SMB header. The names in parenthesis represent * alternative names for the flags. * * SMB_FLAGS_LOCK_AND_READ_OK If the server supports LockAndRead and * (SMB_FLAGS_LOCKS_SUBDIALECT) WriteAndUnlock, it sets this bit in the * Negotiate response. * * SMB_FLAGS_SEND_NO_ACK When on, the client guarantees that there * (SMB_FLAGS_RCV_BUF_POSTED) is a receive buffer posted such that a * "Send-No-Ack" can be used by the server * to respond to the client's request. * * SMB_FLAGS_CASE_INSENSITIVE This is part of the Flags field of every * SMB header. If this bit is set, then all * pathnames in the SMB should be treated as * case-insensitive. Otherwise pathnames are * case-sensitive. * * SMB_FLAGS_CANONICALIZED_PATHS When on in SessionSetupX, this indicates * that all paths sent to the server are * already in OS/2 canonicalized format. * * OS/2 canonical format means that file/directory names are in upper case, * are valid characters, . and .. have been removed and single backslashes * are used as separators. * * SMB_FLAGS_OPLOCK When set in an open file request SMBs * (Open, Create, OpenX, etc.) this bit * indicates a request for an oplock on the * file. When set in the response, this bit * indicates that the oplock was granted. * * SMB_FLAGS_OPLOCK_NOTIFY_ANY When on, this bit indicates that the server * should notify the client on any request * that could cause the file to be changed. * If not set, the server only notifies the * client on other open requests on the file. * This bit is only relevant when * SMB_FLAGS_OPLOCK is set. * * SMB_FLAGS_SERVER_TO_REDIR This bit indicates that the SMB is being * (SMB_FLAGS_REPLY) sent from server to (client) redirector. */ #define SMB_FLAGS_LOCK_AND_READ_OK 0x01 #define SMB_FLAGS_SEND_NO_ACK 0x02 #define SMB_FLAGS_RESERVED 0x04 #define SMB_FLAGS_CASE_INSENSITIVE 0x08 #define SMB_FLAGS_CANONICALIZED_PATHS 0x10 #define SMB_FLAGS_OPLOCK 0x20 #define SMB_FLAGS_OPLOCK_NOTIFY_ANY 0x40 #define SMB_FLAGS_REPLY 0x80 /* * Flags2 field of the SMB header. * * SMB_FLAGS2_READ_IF_EXECUTE is also known as SMB_FLAGS2_PAGING_IO */ #define SMB_FLAGS2_KNOWS_LONG_NAMES 0x0001 #define SMB_FLAGS2_KNOWS_EAS 0x0002 #define SMB_FLAGS2_SMB_SECURITY_SIGNATURE 0x0004 #define SMB_FLAGS2_IS_LONG_NAME 0x0040 #define SMB_FLAGS2_REPARSE_PATH 0x0400 #define SMB_FLAGS2_EXT_SEC 0x0800 #define SMB_FLAGS2_DFS 0x1000 #define SMB_FLAGS2_READ_IF_EXECUTE 0x2000 #define SMB_FLAGS2_NT_STATUS 0x4000 #define SMB_FLAGS2_UNICODE 0x8000 #define DIALECT_UNKNOWN 0 #define PC_NETWORK_PROGRAM_1_0 1 /* The original MSNET SMB protocol */ #define PCLAN1_0 2 /* Some versions of the original MSNET */ #define MICROSOFT_NETWORKS_1_03 3 /* This is used for the MS-NET 1.03 */ #define MICROSOFT_NETWORKS_3_0 4 /* This is the DOS LANMAN 1.0 specific */ #define LANMAN1_0 5 /* This is the first version of the full */ #define LM1_2X002 6 /* This is the first version of the full */ #define DOS_LM1_2X002 7 /* This is the dos equivalent of the */ #define DOS_LANMAN2_1 8 /* DOS LANMAN2.1 */ #define LANMAN2_1 9 /* OS/2 LANMAN2.1 */ #define Windows_for_Workgroups_3_1a 10 /* Windows for Workgroups Version 1.0 */ #define NT_LM_0_12 11 /* The SMB protocol designed for NT */ /* * SMB_TREE_CONNECT_ANDX OptionalSupport flags * * SMB_SUPPORT_SEARCH_BITS The server supports SearchAttributes. * SMB_SHARE_IS_IN_DFS The share is managed by DFS. * SMB_CSC_MASK Offline-caching mask - see CSC values. * SMB_UNIQUE_FILE_NAME The server uses long names and does not support * short names. This indicates to clients that * they may perform directory name-space caching. * SMB_EXTENDED_SIGNATURES The server will use signing key protection. * * SMB_CSC_CACHE_MANUAL_REINT Clients are allowed to cache files for offline * use as requested by users but automatic * file-by-file reintegration is not allowed. * SMB_CSC_CACHE_AUTO_REINT Clients are allowed to automatically cache * files for offline use and file-by-file * reintegration is allowed. * SMB_CSC_CACHE_VDO Clients are allowed to automatically cache files * for offline use, file-by-file reintegration is * allowed and clients are permitted to work from * their local cache even while offline. * SMB_CSC_CACHE_NONE Client-side caching is disabled for this share. * * SHI1005_FLAGS_ACCESS_BASED_DIRECTORY_ENUM * The server will filter directory entries based * on the access permissions of the client. */ #define SMB_SUPPORT_SEARCH_BITS 0x0001 #define SMB_SHARE_IS_IN_DFS 0x0002 #define SMB_CSC_MASK 0x000C #define SMB_UNIQUE_FILE_NAME 0x0010 #define SMB_EXTENDED_SIGNATURES 0x0020 #define SMB_CSC_CACHE_MANUAL_REINT 0x0000 #define SMB_CSC_CACHE_AUTO_REINT 0x0004 #define SMB_CSC_CACHE_VDO 0x0008 #define SMB_CSC_CACHE_NONE 0x000C #define SHI1005_FLAGS_ACCESS_BASED_DIRECTORY_ENUM 0x0800 /* * The subcommand codes, placed in SETUP[0], for named pipe operations are: * SubCommand Code Value Description * =================== ===== ========================================= */ #define CallNamedPipe 0x54 /* open/write/read/close pipe */ #define WaitNamedPipe 0x53 /* wait for pipe to be nonbusy */ #define PeekNmPipe 0x23 /* read but don't remove data */ #define QNmPHandState 0x21 /* query pipe handle modes */ #define SetNmPHandState 0x01 /* set pipe handle modes */ #define QNmPipeInfo 0x22 /* query pipe attributes */ #define TransactNmPipe 0x26 /* write/read operation on pipe */ #define RawReadNmPipe 0x11 /* read pipe in "raw" (non message mode) */ #define RawWriteNmPipe 0x31 /* write pipe "raw" (non message mode) */ /* * Setup[0] Transaction2 Value Description * Subcommand Code * ========================== ===== ============================= */ #define TRANS2_OPEN2 0x00 /* Create file, extended attributes */ #define TRANS2_FIND_FIRST2 0x01 /* Begin search for files */ #define TRANS2_FIND_NEXT2 0x02 /* Resume search for files */ #define TRANS2_QUERY_FS_INFORMATION 0x03 /* Get file system information */ #define TRANS2_SET_FS_INFORMATION 0x04 /* Set file system info. */ #define TRANS2_QUERY_PATH_INFORMATION 0x05 /* Get info, named file or dir */ #define TRANS2_SET_PATH_INFORMATION 0x06 /* Set info, named file or dir */ #define TRANS2_QUERY_FILE_INFORMATION 0x07 /* Get info, handle */ #define TRANS2_SET_FILE_INFORMATION 0x08 /* Set info, handle */ #define TRANS2_FSCTL 0x09 /* Not implemented by NT server */ #define TRANS2_IOCTL2 0x0A /* Not implemented by NT server */ #define TRANS2_FIND_NOTIFY_FIRST 0x0B /* Not implemented by NT server */ #define TRANS2_FIND_NOTIFY_NEXT 0x0C /* Not implemented by NT server */ #define TRANS2_CREATE_DIRECTORY 0x0D /* Create dir, extended attributes */ #define TRANS2_SESSION_SETUP 0x0E /* Session setup, extended security */ #define TRANS2_GET_DFS_REFERRAL 0x10 /* Get a Dfs referral */ #define TRANS2_REPORT_DFS_INCONSISTENCY 0x11 /* Report a Dfs inconsistency */ /* * Access Mode Encoding (CIFS/1.0 1996 Section 3.8). * * The desired access mode passed in SmbOpen and SmbOpenAndX has the following * mapping: * * 1111 11 * 5432 1098 7654 3210 * rWrC rLLL rSSS rAAA * * where: * * W - Write through mode. No read ahead or write behind allowed on * this file or device. When protocol is returned, data is expected * to be on the disk or device. * * S - Sharing mode: * 0 - Compatibility mode (as in core open) * 1 - Deny read/write/execute (exclusive) * 2 - Deny write * 3 - Deny read/execute * 4 - Deny none * * A - Access mode * 0 - Open for reading * 1 - Open for writing * 2 - Open for reading and writing * 3 - Open for execute * * rSSSrAAA = 11111111 (hex FF) indicates FCB open (as in core protocol) * * C - Cache mode * 0 - Normal file * 1 - Do not cache this file * * L - Locality of reference * 0 - Locality of reference is unknown * 1 - Mainly sequential access * 2 - Mainly random access * 3 - Random access with some locality * 4 to 7 - Currently undefined */ #define SMB_DA_SHARE_MASK 0x70 #define SMB_DA_ACCESS_MASK 0x07 #define SMB_DA_FCB_MASK (UCHAR)0xFF #define SMB_DA_ACCESS_READ 0x00 #define SMB_DA_ACCESS_WRITE 0x01 #define SMB_DA_ACCESS_READ_WRITE 0x02 #define SMB_DA_ACCESS_EXECUTE 0x03 #define SMB_DA_SHARE_COMPATIBILITY 0x00 #define SMB_DA_SHARE_EXCLUSIVE 0x10 #define SMB_DA_SHARE_DENY_WRITE 0x20 #define SMB_DA_SHARE_DENY_READ 0x30 #define SMB_DA_SHARE_DENY_NONE 0x40 #define SMB_DA_FCB (UCHAR)0xFF #define SMB_CACHE_NORMAL 0x0000 #define SMB_DO_NOT_CACHE 0x1000 #define SMB_LR_UNKNOWN 0x0000 #define SMB_LR_SEQUENTIAL 0x0100 #define SMB_LR_RANDOM 0x0200 #define SMB_LR_RANDOM_WITH_LOCALITY 0x0300 #define SMB_LR_MASK 0x0F00 #define SMB_DA_WRITE_THROUGH 0x4000 /* * Macros used for share reservation rule checking */ #define SMB_DENY_READ(share_access) ((share_access & FILE_SHARE_READ) == 0) #define SMB_DENY_WRITE(share_access) ((share_access & FILE_SHARE_WRITE) == 0) #define SMB_DENY_DELETE(share_access) ((share_access & FILE_SHARE_DELETE) == 0) #define SMB_DENY_RW(share_access) \ ((share_access & (FILE_SHARE_READ | FILE_SHARE_WRITE)) == 0) #define SMB_DENY_ALL(share_access) (share_access == 0) #define SMB_DENY_NONE(share_access) (share_access == FILE_SHARE_ALL) /* * The SMB open function determines what action should be taken depending * on the existence or lack thereof of files used in the operation. It * has the following mapping: * * 1111 1 * 5432 1098 7654 3210 * rrrr rrrr rrrC rrOO * * where: * * O - Open (action to be taken if the target file exists) * 0 - Fail * 1 - Open or Append file * 2 - Truncate file * * C - Create (action to be taken if the target file does not exist) * 0 - Fail * 1 - Create file */ #define SMB_OFUN_OPEN_MASK 0x3 #define SMB_OFUN_CREATE_MASK 0x10 #define SMB_OFUN_OPEN_FAIL 0 #define SMB_OFUN_OPEN_APPEND 1 #define SMB_OFUN_OPEN_OPEN 1 #define SMB_OFUN_OPEN_TRUNCATE 2 #define SMB_OFUN_CREATE_FAIL 0x00 #define SMB_OFUN_CREATE_CREATE 0x10 /* * The Action field of OpenAndX has the following format: * * 1111 11 * 5432 1098 7654 3210 * Lrrr rrrr rrrr rrOO * * where: * * L - Opportunistic lock. 1 if lock granted, else 0. * * O - Open action: * 1 - The file existed and was opened * 2 - The file did not exist but was created * 3 - The file existed and was truncated */ #define SMB_OACT_LOCK 0x8000 #define SMB_OACT_OPENED 0x01 #define SMB_OACT_CREATED 0x02 #define SMB_OACT_TRUNCATED 0x03 #define SMB_OACT_OPLOCK 0x8000 #define SMB_FTYPE_DISK 0 #define SMB_FTYPE_BYTE_PIPE 1 #define SMB_FTYPE_MESG_PIPE 2 #define SMB_FTYPE_PRINTER 3 #define SMB_FTYPE_UNKNOWN 0xFFFF #define SMB_DEVST_BLOCKING 0x8000 #define SMB_DEVST_ENDPOINT 0x4000 #define SMB_DEVST_TYPE_MASK 0x0C00 #define SMB_DEVST_TYPE_BYTE_PIPE 0x0000 #define SMB_DEVST_TYPE_MESG_PIPE 0x0400 #define SMB_DEVST_RMODE_MASK 0x0300 #define SMB_DEVST_RMODE_BYTES 0x0000 #define SMB_DEVST_RMODE_MESGS 0x0100 #define SMB_DEVST_ICOUNT_MASK 0x00FF /* not used */ #define SMB_FTYPE_IS_DISK(F) ((F) == SMB_FTYPE_DISK) #define SMB_FTYPE_IS_PIPE(F) \ (((F) == SMB_FTYPE_BYTE_PIPE) || ((F) == SMB_FTYPE_MESG_PIPE)) #define SMB_FTYPE_IS_PRINTER(F) ((F) == SMB_FTYPE_PRINTER) /* * TRANS2_FIND */ #define SMB_FIND_FILE_DIRECTORY_INFO 0x101 #define SMB_FIND_FILE_FULL_DIRECTORY_INFO 0x102 #define SMB_FIND_FILE_NAMES_INFO 0x103 #define SMB_FIND_FILE_BOTH_DIRECTORY_INFO 0x104 #define SMB_FIND_FILE_ID_FULL_DIRECTORY_INFO 0x105 #define SMB_FIND_FILE_ID_BOTH_DIRECTORY_INFO 0x106 #define SMB_MAC_FIND_BOTH_HFS_INFO MAC_FIND_BOTH_HFS_INFO /* * Flags for TRANS2_FIND_FIRST2 and TRANS2_FIND_NEXT2 (NTDDK). * * If SMB_FIND_RETURN_RESUME_KEYS was set in the request parameters, * each entry is preceded by a four-byte resume key. */ #define SMB_FIND_CLOSE_AFTER_REQUEST 0x01 #define SMB_FIND_CLOSE_AT_EOS 0x02 #define SMB_FIND_RETURN_RESUME_KEYS 0x04 #define SMB_FIND_CONTINUE_FROM_LAST 0x08 #define SMB_FIND_WITH_BACKUP_INTENT 0x10 /* * TRANS2_QUERY_FS_INFORMATION * * SMB_QUERY_FS_QUOTA_INFO, SMB_QUERY_FS_CONTROL_INFO are not used in Windows * NT, and are not used in any post NT Windows operating systems. If a server * receives these information levels from a client, it should handle them as * invalid information levels. */ #define SMB_INFO_ALLOCATION 1 #define SMB_INFO_VOLUME 2 #define SMB_QUERY_FS_LABEL_INFO 0x101 #define SMB_QUERY_FS_VOLUME_INFO 0x102 #define SMB_QUERY_FS_SIZE_INFO 0x103 #define SMB_QUERY_FS_DEVICE_INFO 0x104 #define SMB_QUERY_FS_ATTRIBUTE_INFO 0x105 #define SMB_QUERY_FS_QUOTA_INFO 0x106 #define SMB_QUERY_FS_CONTROL_INFO 0x107 #define SMB_MAC_QUERY_FS_INFO MAC_QUERY_FS_INFO /* * Internal use only. * Define information levels to represent the following requests: * smb_query_information * smb_query_information2 * smb_set_information * smb_set_information2 */ #define SMB_QUERY_INFORMATION 0x3001 #define SMB_QUERY_INFORMATION2 0x3002 #define SMB_SET_INFORMATION 0x3001 #define SMB_SET_INFORMATION2 0x3002 /* TRANS2_QUERY_{PATH,FILE}_INFORMATION */ #define SMB_INFO_STANDARD 1 /* query, set */ #define SMB_INFO_QUERY_EA_SIZE 2 /* query */ #define SMB_INFO_SET_EAS 2 /* set */ #define SMB_INFO_QUERY_EAS_FROM_LIST 3 /* query */ #define SMB_INFO_QUERY_ALL_EAS 4 /* query */ #define SMB_INFO_QUERY_FULL_NAME 5 /* unused */ #define SMB_INFO_IS_NAME_VALID 6 /* query */ #define SMB_QUERY_FILE_BASIC_INFO 0x101 #define SMB_QUERY_FILE_STANDARD_INFO 0x102 #define SMB_QUERY_FILE_EA_INFO 0x103 #define SMB_QUERY_FILE_NAME_INFO 0x104 #define SMB_QUERY_FILE_ALLOCATION_INFO 0x105 /* unused */ #define SMB_QUERY_FILE_END_OF_FILE_INFO 0x106 /* unused */ #define SMB_QUERY_FILE_ALL_INFO 0x107 #define SMB_QUERY_FILE_ALT_NAME_INFO 0x108 #define SMB_QUERY_FILE_STREAM_INFO 0x109 #define SMB_QUERY_FILE_COMPRESSION_INFO 0x10B #define SMB_MAC_SET_FINDER_INFO MAC_SET_FINDER_INFO #define SMB_MAC_DT_ADD_APPL MAC_DT_ADD_APPL #define SMB_MAC_DT_REMOVE_APPL MAC_DT_REMOVE_APPL #define SMB_MAC_DT_GET_APPL MAC_DT_GET_APPL #define SMB_MAC_DT_GET_ICON MAC_DT_GET_ICON #define SMB_MAC_DT_GET_ICON_INFO MAC_DT_GET_ICON_INFO #define SMB_MAC_DT_ADD_ICON MAC_DT_ADD_ICON #define SMB_SET_FILE_BASIC_INFO 0x101 #define SMB_SET_FILE_DISPOSITION_INFO 0x102 #define SMB_SET_FILE_ALLOCATION_INFO 0x103 #define SMB_SET_FILE_END_OF_FILE_INFO 0x104 /* NT passthrough levels - see ntifs.h FILE_INFORMATION_CLASS */ #define SMB_FILE_BASIC_INFORMATION 1004 #define SMB_FILE_STANDARD_INFORMATION 1005 #define SMB_FILE_INTERNAL_INFORMATION 1006 #define SMB_FILE_EA_INFORMATION 1007 #define SMB_FILE_ACCESS_INFORMATION 1008 #define SMB_FILE_NAME_INFORMATION 1009 #define SMB_FILE_RENAME_INFORMATION 1010 #define SMB_FILE_LINK_INFORMATION 1011 #define SMB_FILE_DISPOSITION_INFORMATION 1013 #define SMB_FILE_ALL_INFORMATION 1018 #define SMB_FILE_ALLOCATION_INFORMATION 1019 #define SMB_FILE_END_OF_FILE_INFORMATION 1020 #define SMB_FILE_ALT_NAME_INFORMATION 1021 #define SMB_FILE_STREAM_INFORMATION 1022 #define SMB_FILE_COMPRESSION_INFORMATION 1028 #define SMB_FILE_NETWORK_OPEN_INFORMATION 1034 #define SMB_FILE_ATTR_TAG_INFORMATION 1035 /* NT passthrough levels - see ntifs.h FILE_FS_INFORMATION_CLASS */ #define SMB_FILE_FS_VOLUME_INFORMATION 1001 #define SMB_FILE_FS_LABEL_INFORMATION 1002 #define SMB_FILE_FS_SIZE_INFORMATION 1003 #define SMB_FILE_FS_DEVICE_INFORMATION 1004 #define SMB_FILE_FS_ATTRIBUTE_INFORMATION 1005 #define SMB_FILE_FS_CONTROL_INFORMATION 1006 #define SMB_FILE_FS_FULLSIZE_INFORMATION 1007 #define SMB_FILE_FS_OBJECTID_INFORMATION 1008 #define SMB_FILE_FS_DRIVERPATH_INFORMATION 1009 /* * The following bits may be set in the SecurityMode field of the * SMB_COM_NEGOTIATE response. * * Notes: * NEGOTIATE_SECURITY_SHARE_LEVEL is a montana2 invention. * * The NTDDK definitions are: * #define NEGOTIATE_USER_SECURITY 0x01 * #define NEGOTIATE_ENCRYPT_PASSWORDS 0x02 * #define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04 * #define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08 */ #define NEGOTIATE_SECURITY_SHARE_LEVEL 0x00 #define NEGOTIATE_SECURITY_USER_LEVEL 0x01 #define NEGOTIATE_SECURITY_CHALLENGE_RESPONSE 0x02 #define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04 #define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08 /* * Negotiated Capabilities (CIFS/1.0 section 4.1.1) * * Capabilities allow the server to tell the client what it supports. * Undefined bits MUST be set to zero by servers, and MUST be ignored * by clients. The bit definitions are: * * Capability Name Encoding Meaning * ==================== ======== ================================== * CAP_RAW_MODE 0x0001 The server supports SMB_COM_READ_RAW and * SMB_COM_WRITE_RAW (obsolescent) * CAP_MPX_MODE 0x0002 The server supports SMB_COM_READ_MPX and * SMB_COM_WRITE_MPX (obsolescent) * CAP_UNICODE 0x0004 The server supports Unicode strings * CAP_LARGE_FILES 0x0008 The server supports large files with 64 * bit offsets * CAP_NT_SMBS 0x0010 The server supports the SMBs particular * to the NT LM 0.12 dialect. * Implies CAP_NT_FIND. * CAP_RPC_REMOTE_APIS 0x0020 The server supports remote admin API * requests via DCE RPC * CAP_STATUS32 0x0040 The server can respond with 32 bit * status codes in Status.Status * CAP_LEVEL_II_OPLOCKS 0x0080 The server supports level 2 oplocks * CAP_LOCK_AND_READ 0x0100 The server supports the * SMB_COM_LOCK_AND_READ SMB * CAP_NT_FIND 0x0200 * CAP_BULK_TRANSFER 0x0400 * CAP_COMPRESSED_BULK 0x0800 * CAP_DFS 0x1000 The server is DFS aware * CAP_INFOLEVEL_PASSTHRU 0x2000 The server supports passthru information * level processing capability. * CAP_LARGE_READX 0x4000 The server supports large * SMB_COM_READ_ANDX * CAP_LARGE_WRITEX 0x8000 The server supports large * SMB_COM_WRITE_ANDX * CAP_RESERVED 0x02000000 Reserved for future use. * CAP_EXTENDED_SECURITY 0x80000000 The server supports extended security * exchanges. * * Extended security exchanges provides a means of supporting arbitrary * authentication protocols within CIFS. Security blobs are opaque to the * CIFS protocol; they are messages in some authentication protocol that * has been agreed upon by client and server by some out of band mechanism, * for which CIFS merely functions as a transport. When * CAP_EXTENDED_SECURITY is negotiated, the server includes a first * security blob in its response; subsequent security blobs are exchanged * in SMB_COM_SESSION_SETUP_ANDX requests and responses until the * authentication protocol terminates. */ #define CAP_RAW_MODE 0x0001 #define CAP_MPX_MODE 0x0002 #define CAP_UNICODE 0x0004 #define CAP_LARGE_FILES 0x0008 #define CAP_NT_SMBS 0x0010 #define CAP_RPC_REMOTE_APIS 0x0020 #define CAP_STATUS32 0x0040 #define CAP_LEVEL_II_OPLOCKS 0x0080 #define CAP_LOCK_AND_READ 0x0100 #define CAP_NT_FIND 0x0200 #define CAP_BULK_TRANSFER 0x0400 #define CAP_COMPRESSED_BULK 0x0800 #define CAP_DFS 0x1000 #define CAP_INFOLEVEL_PASSTHRU 0x2000 #define CAP_LARGE_READX 0x4000 #define CAP_LARGE_WRITEX 0x8000 #define CAP_RESERVED 0x02000000 #define CAP_EXTENDED_SECURITY 0x80000000 /* * Different device types according to NT */ #define FILE_DEVICE_BEEP 0x00000001 #define FILE_DEVICE_CD_ROM 0x00000002 #define FILE_DEVICE_CD_ROM_FILE_SYSTEM 0x00000003 #define FILE_DEVICE_CONTROLLER 0x00000004 #define FILE_DEVICE_DATALINK 0x00000005 #define FILE_DEVICE_DFS 0x00000006 #define FILE_DEVICE_DISK 0x00000007 #define FILE_DEVICE_DISK_FILE_SYSTEM 0x00000008 #define FILE_DEVICE_FILE_SYSTEM 0x00000009 #define FILE_DEVICE_INPORT_PORT 0x0000000a #define FILE_DEVICE_KEYBOARD 0x0000000b #define FILE_DEVICE_MAILSLOT 0x0000000c #define FILE_DEVICE_MIDI_IN 0x0000000d #define FILE_DEVICE_MIDI_OUT 0x0000000e #define FILE_DEVICE_MOUSE 0x0000000f #define FILE_DEVICE_MULTI_UNC_PROVIDER 0x00000010 #define FILE_DEVICE_NAMED_PIPE 0x00000011 #define FILE_DEVICE_NETWORK 0x00000012 #define FILE_DEVICE_NETWORK_BROWSER 0x00000013 #define FILE_DEVICE_NETWORK_FILE_SYSTEM 0x00000014 #define FILE_DEVICE_NULL 0x00000015 #define FILE_DEVICE_PARALLEL_PORT 0x00000016 #define FILE_DEVICE_PHYSICAL_NETCARD 0x00000017 #define FILE_DEVICE_PRINTER 0x00000018 #define FILE_DEVICE_SCANNER 0x00000019 #define FILE_DEVICE_SERIAL_MOUSE_PORT 0x0000001a #define FILE_DEVICE_SERIAL_PORT 0x0000001b #define FILE_DEVICE_SCREEN 0x0000001c #define FILE_DEVICE_SOUND 0x0000001d #define FILE_DEVICE_STREAMS 0x0000001e #define FILE_DEVICE_TAPE 0x0000001f #define FILE_DEVICE_TAPE_FILE_SYSTEM 0x00000020 #define FILE_DEVICE_TRANSPORT 0x00000021 #define FILE_DEVICE_UNKNOWN 0x00000022 #define FILE_DEVICE_VIDEO 0x00000023 #define FILE_DEVICE_VIRTUAL_DISK 0x00000024 #define FILE_DEVICE_WAVE_IN 0x00000025 #define FILE_DEVICE_WAVE_OUT 0x00000026 #define FILE_DEVICE_8042_PORT 0x00000027 #define FILE_DEVICE_NETWORK_REDIRECTOR 0x00000028 #define FILE_DEVICE_BATTERY 0x00000029 #define FILE_DEVICE_BUS_EXTENDER 0x0000002a #define FILE_DEVICE_MODEM 0x0000002b #define FILE_DEVICE_VDM 0x0000002c /* * Some of these device types are not currently accessible over the network * and may never be accessible over the network. Some may change to be * * accessible over the network. The values for device types that may never * be accessible over the network may be redefined to be just reserved at * some date in the future. * * Characteristics is the sum of any of the following: */ #define FILE_REMOVABLE_MEDIA 0x00000001 #define FILE_READ_ONLY_DEVICE 0x00000002 #define FILE_FLOPPY_DISKETTE 0x00000004 #define FILE_WRITE_ONE_MEDIA 0x00000008 #define FILE_REMOTE_DEVICE 0x00000010 #define FILE_DEVICE_IS_MOUNTED 0x00000020 #define FILE_VIRTUAL_VOLUME 0x00000040 /* * CREATE_ANDX ShareAccess Flags */ #define FILE_SHARE_NONE 0x00000000 #define FILE_SHARE_READ 0x00000001 #define FILE_SHARE_WRITE 0x00000002 #define FILE_SHARE_DELETE 0x00000004 #define FILE_SHARE_ALL 0x00000007 #define FILE_SHARE_VALID_FLAGS 0x00000007 /* * CREATE_ANDX CreateDisposition flags * * FILE_SUPERSEDE If the file already exists it should be superseded * by the specified file. If the file does not already * exist then it should be created. * * FILE_CREATE If the file already exists the operation should fail. * If the file does not already exist then it should be * created. (aka CREATE_NEW) * * FILE_OPEN If the file already exists then it should be opened. * If the file does not already exist then the operation * should fail. (aka OPEN_EXISTING) * * FILE_OPEN_IF If the file already exists then it should be opened. * If the file does not already exist then it should be * created. (aka OPEN_ALWAYS) * * FILE_OVERWRITE If the file already exists, it should be opened and * overwritten. If the file does not already exist then * the operation should fail. (aka TRUNCATE_EXISTING) * * FILE_OVERWRITE_IF If the file already exists, it should be opened and * overwritten. If the file does not already exist then * it should be created. (aka CREATE_ALWAYS) */ #define FILE_SUPERSEDE 0x00000000 #define FILE_OPEN 0x00000001 #define FILE_CREATE 0x00000002 #define FILE_OPEN_IF 0x00000003 #define FILE_OVERWRITE 0x00000004 #define FILE_OVERWRITE_IF 0x00000005 #define FILE_MAXIMUM_DISPOSITION 0x00000005 /* * CREATE_ANDX Impersonation levels */ #define SECURITY_ANONYMOUS 0x00000001 #define SECURITY_IDENTIFICATION 0x00000002 #define SECURITY_IMPERSONATION 0x00000003 #define SECURITY_DELEGATION 0x00000004 /* * CREATE_ANDX SecurityFlags */ #define SECURITY_CONTEXT_TRACKING 0x00000001 #define SECURITY_EFFECTIVE_ONLY 0x00000002 /* * Server types */ #define SV_WORKSTATION 0x00000001 /* All workstations */ #define SV_SERVER 0x00000002 /* All servers */ #define SV_SQLSERVER 0x00000004 /* running with SQL server */ #define SV_DOMAIN_CTRL 0x00000008 /* Primary domain controller */ #define SV_DOMAIN_BAKCTRL 0x00000010 /* Backup domain controller */ #define SV_TIME_SOURCE 0x00000020 /* running timesource service */ #define SV_AFP 0x00000040 /* Apple File Protocol */ #define SV_NOVELL 0x00000080 /* Novell servers */ #define SV_DOMAIN_MEMBER 0x00000100 /* Domain Member */ #define SV_PRINTQ_SERVER 0x00000200 /* Server sharing print queue */ #define SV_DIALIN_SERVER 0x00000400 /* Server running dialin */ #define SV_XENIX_SERVER 0x00000800 /* Xenix server */ #define SV_NT 0x00001000 /* NT server */ #define SV_WFW 0x00002000 /* Server running Windows for */ #define SV_SERVER_NT 0x00008000 /* Windows NT non DC server */ #define SV_POTENTIAL_BROWSER 0x00010000 /* can run browser service */ #define SV_BACKUP_BROWSER 0x00020000 /* Backup browser server */ #define SV_MASTER_BROWSER 0x00040000 /* Master browser server */ #define SV_DOMAIN_MASTER 0x00080000 /* Domain Master Browser */ #define SV_OSF 0x00100000 /* OSF operating system */ #define SV_VMS 0x00200000 /* VMS operating system */ #define SV_WINDOWS_95_PLUS 0x00400000 /* Windows 95 or better */ #define SV_LOCAL_LIST_ONLY 0x40000000 /* Enumerate only "local" */ #define SV_TYPE_DOMAIN_ENUM 0x80000000 /* Enumerate Domains */ #define MY_SERVER_TYPE (SV_SERVER | SV_NT | SV_SERVER_NT) #define PRQ_ACTIVE 0 /* Active */ #define PRQ_PAUSE 1 /* Paused */ #define PRQ_ERROR 2 /* Error Occurred */ #define PRQ_PENDING 3 /* Deletion pending */ #define PRJ_QS_QUEUED 0 /* Active */ #define PRJ_QS_PAUSED 1 /* Paused */ #define PRJ_QS_SPOOLING 2 /* Paused */ #define PRJ_QS_PRINTING 3 /* Paused */ #define SHARE_ACCESS_READ 0x01 /* read & execute from resource */ #define SHARE_ACCESS_WRITE 0x02 /* write data to resource */ #define SHARE_ACCESS_CREATE 0x04 /* create an instance of */ #define SHARE_ACCESS_EXEC 0x08 /* execute from resource */ #define SHARE_ACCESS_DELETE 0x10 /* Permission to delete the resource */ #define SHARE_ACCESS_ATTRIB 0x20 /* Permission to modify the resource */ #define SHARE_ACCESS_PERM 0x40 /* Permission to change permissions */ #define SHARE_ACCESS_ALL 0x7F /* All of the above permissions */ /* * SMB_COM_NT_TRANSACTION sub-command codes (CIFS/1.0 section 5.3) * * SubCommand Code Value Description * =============================== ===== ================================= * NT_TRANSACT_CREATE 1 File open/create * NT_TRANSACT_IOCTL 2 Device IOCTL * NT_TRANSACT_SET_SECURITY_DESC 3 Set security descriptor * NT_TRANSACT_NOTIFY_CHANGE 4 Start directory watch * NT_TRANSACT_RENAME 5 Reserved (handle-based rename) * NT_TRANSACT_QUERY_SECURITY_DESC 6 Retrieve security descriptor * NT_TRANSACT_QUERY_QUOTA 7 Retrieve quota information * NT_TRANSACT_SET_QUOTA 8 Set quota information */ #define NT_TRANSACT_MIN_FUNCTION 1 #define NT_TRANSACT_CREATE 1 #define NT_TRANSACT_IOCTL 2 #define NT_TRANSACT_SET_SECURITY_DESC 3 #define NT_TRANSACT_NOTIFY_CHANGE 4 #define NT_TRANSACT_RENAME 5 #define NT_TRANSACT_QUERY_SECURITY_DESC 6 #define NT_TRANSACT_QUERY_QUOTA 7 #define NT_TRANSACT_SET_QUOTA 8 #define NT_TRANSACT_MAX_FUNCTION 8 /* * Pipe states */ #define SMB_PIPE_READMODE_BYTE 0x0000 #define SMB_PIPE_READMODE_MESSAGE 0x0100 #define SMB_PIPE_TYPE_BYTE 0x0000 #define SMB_PIPE_TYPE_MESSAGE 0x0400 #define SMB_PIPE_END_CLIENT 0x0000 #define SMB_PIPE_END_SERVER 0x4000 #define SMB_PIPE_WAIT 0x0000 #define SMB_PIPE_NOWAIT 0x8000 #define SMB_PIPE_UNLIMITED_INSTANCES 0x00FF /* * smb_com_seek request */ #define SMB_SEEK_SET 0 /* set file offset to specified offset */ #define SMB_SEEK_CUR 1 /* set file offset to current plus specified offset */ #define SMB_SEEK_END 2 /* set file offset to EOF plus specified offset */ /* * API Numbers for Transact based RAP (Remote Administration Protocol) calls */ #define API_WshareEnum 0 #define API_WshareGetInfo 1 #define API_WshareSetInfo 2 #define API_WshareAdd 3 #define API_WshareDel 4 #define API_NetShareCheck 5 #define API_WsessionEnum 6 #define API_WsessionGetInfo 7 #define API_WsessionDel 8 #define API_WconnectionEnum 9 #define API_WfileEnum 10 #define API_WfileGetInfo 11 #define API_WfileClose 12 #define API_WserverGetInfo 13 #define API_WserverSetInfo 14 #define API_WserverDiskEnum 15 #define API_WserverAdminCommand 16 #define API_NetAuditOpen 17 #define API_WauditClear 18 #define API_NetErrorLogOpen 19 #define API_WerrorLogClear 20 #define API_NetCharDevEnum 21 #define API_NetCharDevGetInfo 22 #define API_WCharDevControl 23 #define API_NetCharDevQEnum 24 #define API_NetCharDevQGetInfo 25 #define API_WCharDevQSetInfo 26 #define API_WCharDevQPurge 27 #define API_WCharDevQPurgeSelf 28 #define API_WMessageNameEnum 29 #define API_WMessageNameGetInfo 30 #define API_WMessageNameAdd 31 #define API_WMessageNameDel 32 #define API_WMessageNameFwd 33 #define API_WMessageNameUnFwd 34 #define API_WMessageBufferSend 35 #define API_WMessageFileSend 36 #define API_WMessageLogFileSet 37 #define API_WMessageLogFileGet 38 #define API_WServiceEnum 39 #define API_WServiceInstall 40 #define API_WServiceControl 41 #define API_WAccessEnum 42 #define API_WAccessGetInfo 43 #define API_WAccessSetInfo 44 #define API_WAccessAdd 45 #define API_WAccessDel 46 #define API_WGroupEnum 47 #define API_WGroupAdd 48 #define API_WGroupDel 49 #define API_WGroupAddUser 50 #define API_WGroupDelUser 51 #define API_WGroupGetUsers 52 #define API_WUserEnum 53 #define API_WUserAdd 54 #define API_WUserDel 55 #define API_WUserGetInfo 56 #define API_WUserSetInfo 57 #define API_WUserPasswordSet 58 #define API_WUserGetGroups 59 #define API_DeadTableEntry 60 #define API_WWkstaSetUID 62 #define API_WWkstaGetInfo 63 #define API_WWkstaSetInfo 64 #define API_WUseEnum 65 #define API_WUseAdd 66 #define API_WUseDel 67 #define API_WUseGetInfo 68 #define API_WPrintQEnum 69 #define API_WPrintQGetInfo 70 #define API_WPrintQSetInfo 71 #define API_WPrintQAdd 72 #define API_WPrintQDel 73 #define API_WPrintQPause 74 #define API_WPrintQContinue 75 #define API_WPrintJobEnum 76 #define API_WPrintJobGetInfo 77 #define API_WPrintJobSetInfo_OLD 78 #define API_WPrintJobDel 81 #define API_WPrintJobPause 82 #define API_WPrintJobContinue 83 #define API_WPrintDestEnum 84 #define API_WPrintDestGetInfo 85 #define API_WPrintDestControl 86 #define API_WProfileSave 87 #define API_WProfileLoad 88 #define API_WStatisticsGet 89 #define API_WStatisticsClear 90 #define API_NetRemoteTOD 91 #define API_WNetBiosEnum 92 #define API_WNetBiosGetInfo 93 #define API_NetServerEnum 94 #define API_I_NetServerEnum 95 #define API_WServiceGetInfo 96 #define API_WPrintQPurge 103 #define API_NetServerEnum2 104 #define API_WAccessGetUserPerms 105 #define API_WGroupGetInfo 106 #define API_WGroupSetInfo 107 #define API_WGroupSetUsers 108 #define API_WUserSetGroups 109 #define API_WUserModalsGet 110 #define API_WUserModalsSet 111 #define API_WFileEnum2 112 #define API_WUserAdd2 113 #define API_WUserSetInfo2 114 #define API_WUserPasswordSet2 115 #define API_I_NetServerEnum2 116 #define API_WConfigGet2 117 #define API_WConfigGetAll2 118 #define API_WGetDCName 119 #define API_NetHandleGetInfo 120 #define API_NetHandleSetInfo 121 #define API_WStatisticsGet2 122 #define API_WBuildGetInfo 123 #define API_WFileGetInfo2 124 #define API_WFileClose2 125 #define API_WNetServerReqChallenge 126 #define API_WNetServerAuthenticate 127 #define API_WNetServerPasswordSet 128 #define API_WNetAccountDeltas 129 #define API_WNetAccountSync 130 #define API_WUserEnum2 131 #define API_WWkstaUserLogon 132 #define API_WWkstaUserLogoff 133 #define API_WLogonEnum 134 #define API_WErrorLogRead 135 #define API_WI_NetPathType 136 #define API_WI_NetPathCanonicalize 137 #define API_WI_NetPathCompare 138 #define API_WI_NetNameValidate 139 #define API_WI_NetNameCanonicalize 140 #define API_WI_NetNameCompare 141 #define API_WAuditRead 142 #define API_WPrintDestAdd 143 #define API_WPrintDestSetInfo 144 #define API_WPrintDestDel 145 #define API_WUserValidate2 146 #define API_WPrintJobSetInfo 147 #define API_TI_NetServerDiskEnum 148 #define API_TI_NetServerDiskGetInfo 149 #define API_TI_FTVerifyMirror 150 #define API_TI_FTAbortVerify 151 #define API_TI_FTGetInfo 152 #define API_TI_FTSetInfo 153 #define API_TI_FTLockDisk 154 #define API_TI_FTFixError 155 #define API_TI_FTAbortFix 156 #define API_TI_FTDiagnoseError 157 #define API_TI_FTGetDriveStats 158 #define API_TI_FTErrorGetInfo 160 #define API_NetAccessCheck 163 #define API_NetAlertRaise 164 #define API_NetAlertStart 165 #define API_NetAlertStop 166 #define API_NetAuditWrite 167 #define API_NetIRemoteAPI 168 #define API_NetServiceStatus 169 #define API_I_NetServerRegister 170 #define API_I_NetServerDeregister 171 #define API_I_NetSessionEntryMake 172 #define API_I_NetSessionEntryClear 173 #define API_I_NetSessionEntryGetInfo 174 #define API_I_NetSessionEntrySetInfo 175 #define API_I_NetConnectionEntryMake 176 #define API_I_NetConnectionEntryClear 177 #define API_I_NetConnectionEntrySetInfo 178 #define API_I_NetConnectionEntryGetInfo 179 #define API_I_NetFileEntryMake 180 #define API_I_NetFileEntryClear 181 #define API_I_NetFileEntrySetInfo 182 #define API_I_NetFileEntryGetInfo 183 #define API_AltSrvMessageBufferSend 184 #define API_AltSrvMessageFileSend 185 #define API_wI_NetRplWkstaEnum 186 #define API_wI_NetRplWkstaGetInfo 187 #define API_wI_NetRplWkstaSetInfo 188 #define API_wI_NetRplWkstaAdd 189 #define API_wI_NetRplWkstaDel 190 #define API_wI_NetRplProfileEnum 191 #define API_wI_NetRplProfileGetInfo 192 #define API_wI_NetRplProfileSetInfo 193 #define API_wI_NetRplProfileAdd 194 #define API_wI_NetRplProfileDel 195 #define API_wI_NetRplProfileClone 196 #define API_wI_NetRplBaseProfileEnum 197 #define API_WIServerSetInfo 201 #define API_WPrintDriverEnum 205 #define API_WPrintQProcessorEnum 206 #define API_WPrintPortEnum 207 #define API_WNetWriteUpdateLog 208 #define API_WNetAccountUpdate 209 #define API_WNetAccountConfirmUpdate 210 #define API_WConfigSet 211 #define API_WAccountsReplicate 212 #define API_SamOEMChgPasswordUser2_P 214 #define API_NetServerEnum3 215 #define API_WprintDriverGetInfo 250 #define API_WprintDriverSetInfo 251 #define API_WaliasAdd 252 #define API_WaliasDel 253 #define API_WaliasGetInfo 254 #define API_WaliasSetInfo 255 #define API_WaliasEnum 256 #define API_WuserGetLogonAsn 257 #define API_WuserSetLogonAsn 258 #define API_WuserGetAppSel 259 #define API_WuserSetAppSel 260 #define API_WappAdd 261 #define API_WappDel 262 #define API_WappGetInfo 263 #define API_WappSetInfo 264 #define API_WappEnum 265 #define API_WUserDCDBInit 266 #define API_WDASDAdd 267 #define API_WDASDDel 268 #define API_WDASDGetInfo 269 #define API_WDASDSetInfo 270 #define API_WDASDEnum 271 #define API_WDASDCheck 272 #define API_WDASDCtl 273 #define API_WuserRemoteLogonCheck 274 #define API_WUserPasswordSet3 275 #define API_WCreateRIPLMachine 276 #define API_WDeleteRIPLMachine 277 #define API_WGetRIPLMachineInfo 278 #define API_WSetRIPLMachineInfo 279 #define API_WEnumRIPLMachine 280 #define API_WI_ShareAdd 281 #define API_WI_AliasEnum 282 #define API_WaccessApply 283 #define API_WPrt16Query 284 #define API_WPrt16Set 285 #define API_WUserDel100 286 #define API_WUserRemoteLogonCheck2 287 #define API_WRemoteTODSet 294 #define API_WprintJobMoveAll 295 #define API_W16AppParmAdd 296 #define API_W16AppParmDel 297 #define API_W16AppParmGet 298 #define API_W16AppParmSet 299 #define API_W16RIPLMachineCreate 300 #define API_W16RIPLMachineGetInfo 301 #define API_W16RIPLMachineSetInfo 302 #define API_W16RIPLMachineEnum 303 #define API_W16RIPLMachineListParmEnum 304 #define API_W16RIPLMachClassGetInfo 305 #define API_W16RIPLMachClassEnum 306 #define API_W16RIPLMachClassCreate 307 #define API_W16RIPLMachClassSetInfo 308 #define API_W16RIPLMachClassDelete 309 #define API_W16RIPLMachClassLPEnum 310 #define API_W16RIPLMachineDelete 311 #define API_W16WSLevelGetInfo 312 #define API_WserverNameAdd 313 #define API_WserverNameDel 314 #define API_WserverNameEnum 315 #define API_I_WDASDEnum 316 #define API_I_WDASDEnumTerminate 317 #define API_I_WDASDSetInfo2 318 #define MAX_RAP_API 318 #ifdef __cplusplus } #endif #endif /* _SMBSRV_SMB_H */