/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. * * Copyright (c) 1983,1984,1985,1986,1987,1988,1989 AT&T. * All rights reserved. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static void nfs3_attr_cache(vnode_t *, vattr_t *, vattr_t *, hrtime_t, cred_t *); static int nfs_getattr_cache(vnode_t *, struct vattr *); static int nfs_remove_locking_id(vnode_t *, int, char *, char *, int *); struct mi_globals { kmutex_t mig_lock; /* lock protecting mig_list */ list_t mig_list; /* list of NFS v2 or v3 mounts in zone */ boolean_t mig_destructor_called; }; static zone_key_t mi_list_key; /* Debugging flag for PC file shares. */ extern int share_debug; /* * Attributes caching: * * Attributes are cached in the rnode in struct vattr form. * There is a time associated with the cached attributes (r_attrtime) * which tells whether the attributes are valid. The time is initialized * to the difference between current time and the modify time of the vnode * when new attributes are cached. This allows the attributes for * files that have changed recently to be timed out sooner than for files * that have not changed for a long time. There are minimum and maximum * timeout values that can be set per mount point. */ int nfs_waitfor_purge_complete(vnode_t *vp) { rnode_t *rp; k_sigset_t smask; rp = VTOR(vp); if (rp->r_serial != NULL && rp->r_serial != curthread) { mutex_enter(&rp->r_statelock); sigintr(&smask, VTOMI(vp)->mi_flags & MI_INT); while (rp->r_serial != NULL) { if (!cv_wait_sig(&rp->r_cv, &rp->r_statelock)) { sigunintr(&smask); mutex_exit(&rp->r_statelock); return (EINTR); } } sigunintr(&smask); mutex_exit(&rp->r_statelock); } return (0); } /* * Validate caches by checking cached attributes. If the cached * attributes have timed out, then get new attributes from the server. * As a side affect, this will do cache invalidation if the attributes * have changed. * * If the attributes have not timed out and if there is a cache * invalidation being done by some other thread, then wait until that * thread has completed the cache invalidation. */ int nfs_validate_caches(vnode_t *vp, cred_t *cr) { int error; struct vattr va; if (ATTRCACHE_VALID(vp)) { error = nfs_waitfor_purge_complete(vp); if (error) return (error); return (0); } va.va_mask = AT_ALL; return (nfs_getattr_otw(vp, &va, cr)); } /* * Validate caches by checking cached attributes. If the cached * attributes have timed out, then get new attributes from the server. * As a side affect, this will do cache invalidation if the attributes * have changed. * * If the attributes have not timed out and if there is a cache * invalidation being done by some other thread, then wait until that * thread has completed the cache invalidation. */ int nfs3_validate_caches(vnode_t *vp, cred_t *cr) { int error; struct vattr va; if (ATTRCACHE_VALID(vp)) { error = nfs_waitfor_purge_complete(vp); if (error) return (error); return (0); } va.va_mask = AT_ALL; return (nfs3_getattr_otw(vp, &va, cr)); } /* * Purge all of the various NFS `data' caches. */ void nfs_purge_caches(vnode_t *vp, int purge_dnlc, cred_t *cr) { rnode_t *rp; char *contents; int size; int error; /* * Purge the DNLC for any entries which refer to this file. * Avoid recursive entry into dnlc_purge_vp() in case of a directory. */ rp = VTOR(vp); mutex_enter(&rp->r_statelock); if (vp->v_count > 1 && (vp->v_type == VDIR || purge_dnlc == NFS_PURGE_DNLC) && !(rp->r_flags & RINDNLCPURGE)) { /* * Set the RINDNLCPURGE flag to prevent recursive entry * into dnlc_purge_vp() */ if (vp->v_type == VDIR) rp->r_flags |= RINDNLCPURGE; mutex_exit(&rp->r_statelock); dnlc_purge_vp(vp); mutex_enter(&rp->r_statelock); if (rp->r_flags & RINDNLCPURGE) rp->r_flags &= ~RINDNLCPURGE; } /* * Clear any readdir state bits and purge the readlink response cache. */ contents = rp->r_symlink.contents; size = rp->r_symlink.size; rp->r_symlink.contents = NULL; mutex_exit(&rp->r_statelock); if (contents != NULL) { kmem_free((void *)contents, size); } /* * Flush the page cache. */ if (vn_has_cached_data(vp)) { error = VOP_PUTPAGE(vp, (u_offset_t)0, 0, B_INVAL, cr, NULL); if (error && (error == ENOSPC || error == EDQUOT)) { mutex_enter(&rp->r_statelock); if (!rp->r_error) rp->r_error = error; mutex_exit(&rp->r_statelock); } } /* * Flush the readdir response cache. */ if (HAVE_RDDIR_CACHE(rp)) nfs_purge_rddir_cache(vp); } /* * Purge the readdir cache of all entries */ void nfs_purge_rddir_cache(vnode_t *vp) { rnode_t *rp; rddir_cache *rdc; rddir_cache *nrdc; rp = VTOR(vp); top: mutex_enter(&rp->r_statelock); rp->r_direof = NULL; rp->r_flags &= ~RLOOKUP; rp->r_flags |= RREADDIRPLUS; rdc = avl_first(&rp->r_dir); while (rdc != NULL) { nrdc = AVL_NEXT(&rp->r_dir, rdc); avl_remove(&rp->r_dir, rdc); rddir_cache_rele(rdc); rdc = nrdc; } mutex_exit(&rp->r_statelock); } /* * Do a cache check based on the post-operation attributes. * Then make them the new cached attributes. If no attributes * were returned, then mark the attributes as timed out. */ void nfs3_cache_post_op_attr(vnode_t *vp, post_op_attr *poap, hrtime_t t, cred_t *cr) { vattr_t attr; if (!poap->attributes) { PURGE_ATTRCACHE(vp); return; } (void) nfs3_cache_fattr3(vp, &poap->attr, &attr, t, cr); } /* * Same as above, but using a vattr */ void nfs3_cache_post_op_vattr(vnode_t *vp, post_op_vattr *poap, hrtime_t t, cred_t *cr) { if (!poap->attributes) { PURGE_ATTRCACHE(vp); return; } nfs_attr_cache(vp, poap->fres.vap, t, cr); } /* * Do a cache check based on the weak cache consistency attributes. * These consist of a small set of pre-operation attributes and the * full set of post-operation attributes. * * If we are given the pre-operation attributes, then use them to * check the validity of the various caches. Then, if we got the * post-operation attributes, make them the new cached attributes. * If we didn't get the post-operation attributes, then mark the * attribute cache as timed out so that the next reference will * cause a GETATTR to the server to refresh with the current * attributes. * * Otherwise, if we didn't get the pre-operation attributes, but * we did get the post-operation attributes, then use these * attributes to check the validity of the various caches. This * will probably cause a flush of the caches because if the * operation succeeded, the attributes of the object were changed * in some way from the old post-operation attributes. This * should be okay because it is the safe thing to do. After * checking the data caches, then we make these the new cached * attributes. * * Otherwise, we didn't get either the pre- or post-operation * attributes. Simply mark the attribute cache as timed out so * the next reference will cause a GETATTR to the server to * refresh with the current attributes. * * If an error occurred trying to convert the over the wire * attributes to a vattr, then simply mark the attribute cache as * timed out. */ void nfs3_cache_wcc_data(vnode_t *vp, wcc_data *wccp, hrtime_t t, cred_t *cr) { vattr_t bva; vattr_t ava; if (wccp->after.attributes) { if (fattr3_to_vattr(vp, &wccp->after.attr, &ava)) { PURGE_ATTRCACHE(vp); return; } if (wccp->before.attributes) { bva.va_ctime.tv_sec = wccp->before.attr.ctime.seconds; bva.va_ctime.tv_nsec = wccp->before.attr.ctime.nseconds; bva.va_mtime.tv_sec = wccp->before.attr.mtime.seconds; bva.va_mtime.tv_nsec = wccp->before.attr.mtime.nseconds; bva.va_size = wccp->before.attr.size; nfs3_attr_cache(vp, &bva, &ava, t, cr); } else nfs_attr_cache(vp, &ava, t, cr); } else { PURGE_ATTRCACHE(vp); } } /* * Set attributes cache for given vnode using nfsattr. * * This routine does not do cache validation with the attributes. * * If an error occurred trying to convert the over the wire * attributes to a vattr, then simply mark the attribute cache as * timed out. */ void nfs_attrcache(vnode_t *vp, struct nfsfattr *na, hrtime_t t) { rnode_t *rp; struct vattr va; if (!nattr_to_vattr(vp, na, &va)) { rp = VTOR(vp); mutex_enter(&rp->r_statelock); if (rp->r_mtime <= t) nfs_attrcache_va(vp, &va); mutex_exit(&rp->r_statelock); } else { PURGE_ATTRCACHE(vp); } } /* * Set attributes cache for given vnode using fattr3. * * This routine does not do cache validation with the attributes. * * If an error occurred trying to convert the over the wire * attributes to a vattr, then simply mark the attribute cache as * timed out. */ void nfs3_attrcache(vnode_t *vp, fattr3 *na, hrtime_t t) { rnode_t *rp; struct vattr va; if (!fattr3_to_vattr(vp, na, &va)) { rp = VTOR(vp); mutex_enter(&rp->r_statelock); if (rp->r_mtime <= t) nfs_attrcache_va(vp, &va); mutex_exit(&rp->r_statelock); } else { PURGE_ATTRCACHE(vp); } } /* * Do a cache check based on attributes returned over the wire. The * new attributes are cached. * * If an error occurred trying to convert the over the wire attributes * to a vattr, then just return that error. * * As a side affect, the vattr argument is filled in with the converted * attributes. */ int nfs_cache_fattr(vnode_t *vp, struct nfsfattr *na, vattr_t *vap, hrtime_t t, cred_t *cr) { int error; error = nattr_to_vattr(vp, na, vap); if (error) return (error); nfs_attr_cache(vp, vap, t, cr); return (0); } /* * Do a cache check based on attributes returned over the wire. The * new attributes are cached. * * If an error occurred trying to convert the over the wire attributes * to a vattr, then just return that error. * * As a side affect, the vattr argument is filled in with the converted * attributes. */ int nfs3_cache_fattr3(vnode_t *vp, fattr3 *na, vattr_t *vap, hrtime_t t, cred_t *cr) { int error; error = fattr3_to_vattr(vp, na, vap); if (error) return (error); nfs_attr_cache(vp, vap, t, cr); return (0); } /* * Use the passed in virtual attributes to check to see whether the * data and metadata caches are valid, cache the new attributes, and * then do the cache invalidation if required. * * The cache validation and caching of the new attributes is done * atomically via the use of the mutex, r_statelock. If required, * the cache invalidation is done atomically w.r.t. the cache * validation and caching of the attributes via the pseudo lock, * r_serial. * * This routine is used to do cache validation and attributes caching * for operations with a single set of post operation attributes. */ void nfs_attr_cache(vnode_t *vp, vattr_t *vap, hrtime_t t, cred_t *cr) { rnode_t *rp; int mtime_changed = 0; int ctime_changed = 0; vsecattr_t *vsp; int was_serial; len_t preattr_rsize; boolean_t writeattr_set = B_FALSE; boolean_t cachepurge_set = B_FALSE; rp = VTOR(vp); mutex_enter(&rp->r_statelock); if (rp->r_serial != curthread) { klwp_t *lwp = ttolwp(curthread); was_serial = 0; if (lwp != NULL) lwp->lwp_nostop++; while (rp->r_serial != NULL) { if (!cv_wait_sig(&rp->r_cv, &rp->r_statelock)) { mutex_exit(&rp->r_statelock); if (lwp != NULL) lwp->lwp_nostop--; return; } } if (lwp != NULL) lwp->lwp_nostop--; } else was_serial = 1; if (rp->r_mtime > t) { if (!CACHE_VALID(rp, vap->va_mtime, vap->va_size)) PURGE_ATTRCACHE_LOCKED(rp); mutex_exit(&rp->r_statelock); return; } /* * Write thread after writing data to file on remote server, * will always set RWRITEATTR to indicate that file on remote * server was modified with a WRITE operation and would have * marked attribute cache as timed out. If RWRITEATTR * is set, then do not check for mtime and ctime change. */ if (!(rp->r_flags & RWRITEATTR)) { if (!CACHE_VALID(rp, vap->va_mtime, vap->va_size)) mtime_changed = 1; if (rp->r_attr.va_ctime.tv_sec != vap->va_ctime.tv_sec || rp->r_attr.va_ctime.tv_nsec != vap->va_ctime.tv_nsec) ctime_changed = 1; } else { writeattr_set = B_TRUE; } preattr_rsize = rp->r_size; nfs_attrcache_va(vp, vap); /* * If we have updated filesize in nfs_attrcache_va, as soon as we * drop statelock we will be in transition of purging all * our caches and updating them. It is possible for another * thread to pick this new file size and read in zeroed data. * stall other threads till cache purge is complete. */ if ((vp->v_type == VREG) && (rp->r_size != preattr_rsize)) { /* * If RWRITEATTR was set and we have updated the file * size, Server's returned file size need not necessarily * be because of this Client's WRITE. We need to purge * all caches. */ if (writeattr_set) mtime_changed = 1; if (mtime_changed && !(rp->r_flags & RINCACHEPURGE)) { rp->r_flags |= RINCACHEPURGE; cachepurge_set = B_TRUE; } } if (!mtime_changed && !ctime_changed) { mutex_exit(&rp->r_statelock); return; } rp->r_serial = curthread; mutex_exit(&rp->r_statelock); if (mtime_changed) nfs_purge_caches(vp, NFS_NOPURGE_DNLC, cr); if ((rp->r_flags & RINCACHEPURGE) && cachepurge_set) { mutex_enter(&rp->r_statelock); rp->r_flags &= ~RINCACHEPURGE; cv_broadcast(&rp->r_cv); mutex_exit(&rp->r_statelock); cachepurge_set = B_FALSE; } if (ctime_changed) { (void) nfs_access_purge_rp(rp); if (rp->r_secattr != NULL) { mutex_enter(&rp->r_statelock); vsp = rp->r_secattr; rp->r_secattr = NULL; mutex_exit(&rp->r_statelock); if (vsp != NULL) nfs_acl_free(vsp); } } if (!was_serial) { mutex_enter(&rp->r_statelock); rp->r_serial = NULL; cv_broadcast(&rp->r_cv); mutex_exit(&rp->r_statelock); } } /* * Use the passed in "before" virtual attributes to check to see * whether the data and metadata caches are valid, cache the "after" * new attributes, and then do the cache invalidation if required. * * The cache validation and caching of the new attributes is done * atomically via the use of the mutex, r_statelock. If required, * the cache invalidation is done atomically w.r.t. the cache * validation and caching of the attributes via the pseudo lock, * r_serial. * * This routine is used to do cache validation and attributes caching * for operations with both pre operation attributes and post operation * attributes. */ static void nfs3_attr_cache(vnode_t *vp, vattr_t *bvap, vattr_t *avap, hrtime_t t, cred_t *cr) { rnode_t *rp; int mtime_changed = 0; int ctime_changed = 0; vsecattr_t *vsp; int was_serial; len_t preattr_rsize; boolean_t writeattr_set = B_FALSE; boolean_t cachepurge_set = B_FALSE; rp = VTOR(vp); mutex_enter(&rp->r_statelock); if (rp->r_serial != curthread) { klwp_t *lwp = ttolwp(curthread); was_serial = 0; if (lwp != NULL) lwp->lwp_nostop++; while (rp->r_serial != NULL) { if (!cv_wait_sig(&rp->r_cv, &rp->r_statelock)) { mutex_exit(&rp->r_statelock); if (lwp != NULL) lwp->lwp_nostop--; return; } } if (lwp != NULL) lwp->lwp_nostop--; } else was_serial = 1; if (rp->r_mtime > t) { if (!CACHE_VALID(rp, avap->va_mtime, avap->va_size)) PURGE_ATTRCACHE_LOCKED(rp); mutex_exit(&rp->r_statelock); return; } /* * Write thread after writing data to file on remote server, * will always set RWRITEATTR to indicate that file on remote * server was modified with a WRITE operation and would have * marked attribute cache as timed out. If RWRITEATTR * is set, then do not check for mtime and ctime change. */ if (!(rp->r_flags & RWRITEATTR)) { if (!CACHE_VALID(rp, bvap->va_mtime, bvap->va_size)) mtime_changed = 1; if (rp->r_attr.va_ctime.tv_sec != bvap->va_ctime.tv_sec || rp->r_attr.va_ctime.tv_nsec != bvap->va_ctime.tv_nsec) ctime_changed = 1; } else { writeattr_set = B_TRUE; } preattr_rsize = rp->r_size; nfs_attrcache_va(vp, avap); /* * If we have updated filesize in nfs_attrcache_va, as soon as we * drop statelock we will be in transition of purging all * our caches and updating them. It is possible for another * thread to pick this new file size and read in zeroed data. * stall other threads till cache purge is complete. */ if ((vp->v_type == VREG) && (rp->r_size != preattr_rsize)) { /* * If RWRITEATTR was set and we have updated the file * size, Server's returned file size need not necessarily * be because of this Client's WRITE. We need to purge * all caches. */ if (writeattr_set) mtime_changed = 1; if (mtime_changed && !(rp->r_flags & RINCACHEPURGE)) { rp->r_flags |= RINCACHEPURGE; cachepurge_set = B_TRUE; } } if (!mtime_changed && !ctime_changed) { mutex_exit(&rp->r_statelock); return; } rp->r_serial = curthread; mutex_exit(&rp->r_statelock); if (mtime_changed) nfs_purge_caches(vp, NFS_NOPURGE_DNLC, cr); if ((rp->r_flags & RINCACHEPURGE) && cachepurge_set) { mutex_enter(&rp->r_statelock); rp->r_flags &= ~RINCACHEPURGE; cv_broadcast(&rp->r_cv); mutex_exit(&rp->r_statelock); cachepurge_set = B_FALSE; } if (ctime_changed) { (void) nfs_access_purge_rp(rp); if (rp->r_secattr != NULL) { mutex_enter(&rp->r_statelock); vsp = rp->r_secattr; rp->r_secattr = NULL; mutex_exit(&rp->r_statelock); if (vsp != NULL) nfs_acl_free(vsp); } } if (!was_serial) { mutex_enter(&rp->r_statelock); rp->r_serial = NULL; cv_broadcast(&rp->r_cv); mutex_exit(&rp->r_statelock); } } /* * Set attributes cache for given vnode using virtual attributes. * * Set the timeout value on the attribute cache and fill it * with the passed in attributes. * * The caller must be holding r_statelock. */ void nfs_attrcache_va(vnode_t *vp, struct vattr *va) { rnode_t *rp; mntinfo_t *mi; hrtime_t delta; hrtime_t now; rp = VTOR(vp); ASSERT(MUTEX_HELD(&rp->r_statelock)); now = gethrtime(); mi = VTOMI(vp); /* * Delta is the number of nanoseconds that we will * cache the attributes of the file. It is based on * the number of nanoseconds since the last time that * we detected a change. The assumption is that files * that changed recently are likely to change again. * There is a minimum and a maximum for regular files * and for directories which is enforced though. * * Using the time since last change was detected * eliminates direct comparison or calculation * using mixed client and server times. NFS does * not make any assumptions regarding the client * and server clocks being synchronized. */ if (va->va_mtime.tv_sec != rp->r_attr.va_mtime.tv_sec || va->va_mtime.tv_nsec != rp->r_attr.va_mtime.tv_nsec || va->va_size != rp->r_attr.va_size) rp->r_mtime = now; if ((mi->mi_flags & MI_NOAC) || (vp->v_flag & VNOCACHE)) delta = 0; else { delta = now - rp->r_mtime; if (vp->v_type == VDIR) { if (delta < mi->mi_acdirmin) delta = mi->mi_acdirmin; else if (delta > mi->mi_acdirmax) delta = mi->mi_acdirmax; } else { if (delta < mi->mi_acregmin) delta = mi->mi_acregmin; else if (delta > mi->mi_acregmax) delta = mi->mi_acregmax; } } rp->r_attrtime = now + delta; rp->r_attr = *va; /* * Update the size of the file if there is no cached data or if * the cached data is clean and there is no data being written * out. */ if (rp->r_size != va->va_size && (!vn_has_cached_data(vp) || (!(rp->r_flags & RDIRTY) && rp->r_count == 0))) rp->r_size = va->va_size; nfs_setswaplike(vp, va); rp->r_flags &= ~RWRITEATTR; } /* * Fill in attribute from the cache. * If valid, then return 0 to indicate that no error occurred, * otherwise return 1 to indicate that an error occurred. */ static int nfs_getattr_cache(vnode_t *vp, struct vattr *vap) { rnode_t *rp; uint_t mask = vap->va_mask; rp = VTOR(vp); mutex_enter(&rp->r_statelock); if (ATTRCACHE_VALID(vp)) { /* * Cached attributes are valid */ *vap = rp->r_attr; /* * Set the caller's va_mask to the set of attributes * that were requested ANDed with the attributes that * are available. If attributes were requested that * are not available, those bits must be turned off * in the callers va_mask. */ vap->va_mask &= mask; mutex_exit(&rp->r_statelock); return (0); } mutex_exit(&rp->r_statelock); return (1); } /* * Get attributes over-the-wire and update attributes cache * if no error occurred in the over-the-wire operation. * Return 0 if successful, otherwise error. */ int nfs_getattr_otw(vnode_t *vp, struct vattr *vap, cred_t *cr) { int error; struct nfsattrstat ns; int douprintf; mntinfo_t *mi; failinfo_t fi; hrtime_t t; mi = VTOMI(vp); fi.vp = vp; fi.fhp = NULL; /* no need to update, filehandle not copied */ fi.copyproc = nfscopyfh; fi.lookupproc = nfslookup; fi.xattrdirproc = acl_getxattrdir2; if (mi->mi_flags & MI_ACL) { error = acl_getattr2_otw(vp, vap, cr); if (mi->mi_flags & MI_ACL) return (error); } douprintf = 1; t = gethrtime(); error = rfs2call(mi, RFS_GETATTR, xdr_fhandle, (caddr_t)VTOFH(vp), xdr_attrstat, (caddr_t)&ns, cr, &douprintf, &ns.ns_status, 0, &fi); if (!error) { error = geterrno(ns.ns_status); if (!error) error = nfs_cache_fattr(vp, &ns.ns_attr, vap, t, cr); else { PURGE_STALE_FH(error, vp, cr); } } return (error); } /* * Return either cached ot remote attributes. If get remote attr * use them to check and invalidate caches, then cache the new attributes. */ int nfsgetattr(vnode_t *vp, struct vattr *vap, cred_t *cr) { int error; rnode_t *rp; /* * If we've got cached attributes, we're done, otherwise go * to the server to get attributes, which will update the cache * in the process. */ error = nfs_getattr_cache(vp, vap); if (error) error = nfs_getattr_otw(vp, vap, cr); /* Return the client's view of file size */ rp = VTOR(vp); mutex_enter(&rp->r_statelock); vap->va_size = rp->r_size; mutex_exit(&rp->r_statelock); return (error); } /* * Get attributes over-the-wire and update attributes cache * if no error occurred in the over-the-wire operation. * Return 0 if successful, otherwise error. */ int nfs3_getattr_otw(vnode_t *vp, struct vattr *vap, cred_t *cr) { int error; GETATTR3args args; GETATTR3vres res; int douprintf; failinfo_t fi; hrtime_t t; args.object = *VTOFH3(vp); fi.vp = vp; fi.fhp = (caddr_t)&args.object; fi.copyproc = nfs3copyfh; fi.lookupproc = nfs3lookup; fi.xattrdirproc = acl_getxattrdir3; res.fres.vp = vp; res.fres.vap = vap; douprintf = 1; t = gethrtime(); error = rfs3call(VTOMI(vp), NFSPROC3_GETATTR, xdr_nfs_fh3, (caddr_t)&args, xdr_GETATTR3vres, (caddr_t)&res, cr, &douprintf, &res.status, 0, &fi); if (error) return (error); error = geterrno3(res.status); if (error) { PURGE_STALE_FH(error, vp, cr); return (error); } /* * Catch status codes that indicate fattr3 to vattr translation failure */ if (res.fres.status) return (res.fres.status); nfs_attr_cache(vp, vap, t, cr); return (0); } /* * Return either cached or remote attributes. If get remote attr * use them to check and invalidate caches, then cache the new attributes. */ int nfs3getattr(vnode_t *vp, struct vattr *vap, cred_t *cr) { int error; rnode_t *rp; /* * If we've got cached attributes, we're done, otherwise go * to the server to get attributes, which will update the cache * in the process. */ error = nfs_getattr_cache(vp, vap); if (error) error = nfs3_getattr_otw(vp, vap, cr); /* Return the client's view of file size */ rp = VTOR(vp); mutex_enter(&rp->r_statelock); vap->va_size = rp->r_size; mutex_exit(&rp->r_statelock); return (error); } vtype_t nf_to_vt[] = { VNON, VREG, VDIR, VBLK, VCHR, VLNK, VSOCK }; /* * Convert NFS Version 2 over the network attributes to the local * virtual attributes. The mapping between the UID_NOBODY/GID_NOBODY * network representation and the local representation is done here. * Returns 0 for success, error if failed due to overflow. */ int nattr_to_vattr(vnode_t *vp, struct nfsfattr *na, struct vattr *vap) { /* overflow in time attributes? */ #ifndef _LP64 if (!NFS2_FATTR_TIME_OK(na)) return (EOVERFLOW); #endif vap->va_mask = AT_ALL; if (na->na_type < NFNON || na->na_type > NFSOC) vap->va_type = VBAD; else vap->va_type = nf_to_vt[na->na_type]; vap->va_mode = na->na_mode; vap->va_uid = (na->na_uid == NFS_UID_NOBODY) ? UID_NOBODY : na->na_uid; vap->va_gid = (na->na_gid == NFS_GID_NOBODY) ? GID_NOBODY : na->na_gid; vap->va_fsid = vp->v_vfsp->vfs_dev; vap->va_nodeid = na->na_nodeid; vap->va_nlink = na->na_nlink; vap->va_size = na->na_size; /* keep for cache validation */ /* * nfs protocol defines times as unsigned so don't extend sign, * unless sysadmin set nfs_allow_preepoch_time. */ NFS_TIME_T_CONVERT(vap->va_atime.tv_sec, na->na_atime.tv_sec); vap->va_atime.tv_nsec = (uint32_t)(na->na_atime.tv_usec * 1000); NFS_TIME_T_CONVERT(vap->va_mtime.tv_sec, na->na_mtime.tv_sec); vap->va_mtime.tv_nsec = (uint32_t)(na->na_mtime.tv_usec * 1000); NFS_TIME_T_CONVERT(vap->va_ctime.tv_sec, na->na_ctime.tv_sec); vap->va_ctime.tv_nsec = (uint32_t)(na->na_ctime.tv_usec * 1000); /* * Shannon's law - uncompress the received dev_t * if the top half of is zero indicating a response * from an `older style' OS. Except for when it is a * `new style' OS sending the maj device of zero, * in which case the algorithm still works because the * fact that it is a new style server * is hidden by the minor device not being greater * than 255 (a requirement in this case). */ if ((na->na_rdev & 0xffff0000) == 0) vap->va_rdev = nfsv2_expdev(na->na_rdev); else vap->va_rdev = expldev(na->na_rdev); vap->va_nblocks = na->na_blocks; switch (na->na_type) { case NFBLK: vap->va_blksize = DEV_BSIZE; break; case NFCHR: vap->va_blksize = MAXBSIZE; break; case NFSOC: default: vap->va_blksize = na->na_blocksize; break; } /* * This bit of ugliness is a hack to preserve the * over-the-wire protocols for named-pipe vnodes. * It remaps the special over-the-wire type to the * VFIFO type. (see note in nfs.h) */ if (NA_ISFIFO(na)) { vap->va_type = VFIFO; vap->va_mode = (vap->va_mode & ~S_IFMT) | S_IFIFO; vap->va_rdev = 0; vap->va_blksize = na->na_blocksize; } vap->va_seq = 0; return (0); } /* * Convert NFS Version 3 over the network attributes to the local * virtual attributes. The mapping between the UID_NOBODY/GID_NOBODY * network representation and the local representation is done here. */ vtype_t nf3_to_vt[] = { VBAD, VREG, VDIR, VBLK, VCHR, VLNK, VSOCK, VFIFO }; int fattr3_to_vattr(vnode_t *vp, fattr3 *na, struct vattr *vap) { #ifndef _LP64 /* overflow in time attributes? */ if (!NFS3_FATTR_TIME_OK(na)) return (EOVERFLOW); #endif if (!NFS3_SIZE_OK(na->size)) /* file too big */ return (EFBIG); vap->va_mask = AT_ALL; if (na->type < NF3REG || na->type > NF3FIFO) vap->va_type = VBAD; else vap->va_type = nf3_to_vt[na->type]; vap->va_mode = na->mode; vap->va_uid = (na->uid == NFS_UID_NOBODY) ? UID_NOBODY : (uid_t)na->uid; vap->va_gid = (na->gid == NFS_GID_NOBODY) ? GID_NOBODY : (gid_t)na->gid; vap->va_fsid = vp->v_vfsp->vfs_dev; vap->va_nodeid = na->fileid; vap->va_nlink = na->nlink; vap->va_size = na->size; /* * nfs protocol defines times as unsigned so don't extend sign, * unless sysadmin set nfs_allow_preepoch_time. */ NFS_TIME_T_CONVERT(vap->va_atime.tv_sec, na->atime.seconds); vap->va_atime.tv_nsec = (uint32_t)na->atime.nseconds; NFS_TIME_T_CONVERT(vap->va_mtime.tv_sec, na->mtime.seconds); vap->va_mtime.tv_nsec = (uint32_t)na->mtime.nseconds; NFS_TIME_T_CONVERT(vap->va_ctime.tv_sec, na->ctime.seconds); vap->va_ctime.tv_nsec = (uint32_t)na->ctime.nseconds; switch (na->type) { case NF3BLK: vap->va_rdev = makedevice(na->rdev.specdata1, na->rdev.specdata2); vap->va_blksize = DEV_BSIZE; vap->va_nblocks = 0; break; case NF3CHR: vap->va_rdev = makedevice(na->rdev.specdata1, na->rdev.specdata2); vap->va_blksize = MAXBSIZE; vap->va_nblocks = 0; break; case NF3REG: case NF3DIR: case NF3LNK: vap->va_rdev = 0; vap->va_blksize = MAXBSIZE; vap->va_nblocks = (u_longlong_t) ((na->used + (size3)DEV_BSIZE - (size3)1) / (size3)DEV_BSIZE); break; case NF3SOCK: case NF3FIFO: default: vap->va_rdev = 0; vap->va_blksize = MAXBSIZE; vap->va_nblocks = 0; break; } vap->va_seq = 0; return (0); } /* * Asynchronous I/O parameters. nfs_async_threads is the high-water mark * for the demand-based allocation of async threads per-mount. The * nfs_async_timeout is the amount of time a thread will live after it * becomes idle, unless new I/O requests are received before the thread * dies. See nfs_async_putpage and nfs_async_start. */ int nfs_async_timeout = -1; /* uninitialized */ static void nfs_async_start(struct vfs *); static void free_async_args(struct nfs_async_reqs *args) { rnode_t *rp; if (args->a_io != NFS_INACTIVE) { rp = VTOR(args->a_vp); mutex_enter(&rp->r_statelock); rp->r_count--; if (args->a_io == NFS_PUTAPAGE || args->a_io == NFS_PAGEIO) rp->r_awcount--; cv_broadcast(&rp->r_cv); mutex_exit(&rp->r_statelock); VN_RELE(args->a_vp); } crfree(args->a_cred); kmem_free(args, sizeof (*args)); } /* * Cross-zone thread creation and NFS access is disallowed, yet fsflush() and * pageout(), running in the global zone, have legitimate reasons to do * VOP_PUTPAGE(B_ASYNC) on other zones' NFS mounts. We avoid the problem by * use of a a per-mount "asynchronous requests manager thread" which is * signaled by the various asynchronous work routines when there is * asynchronous work to be done. It is responsible for creating new * worker threads if necessary, and notifying existing worker threads * that there is work to be done. * * In other words, it will "take the specifications from the customers and * give them to the engineers." * * Worker threads die off of their own accord if they are no longer * needed. * * This thread is killed when the zone is going away or the filesystem * is being unmounted. */ void nfs_async_manager(vfs_t *vfsp) { callb_cpr_t cprinfo; mntinfo_t *mi; uint_t max_threads; mi = VFTOMI(vfsp); CALLB_CPR_INIT(&cprinfo, &mi->mi_async_lock, callb_generic_cpr, "nfs_async_manager"); mutex_enter(&mi->mi_async_lock); /* * We want to stash the max number of threads that this mount was * allowed so we can use it later when the variable is set to zero as * part of the zone/mount going away. * * We want to be able to create at least one thread to handle * asyncrhonous inactive calls. */ max_threads = MAX(mi->mi_max_threads, 1); mutex_enter(&mi->mi_lock); /* * We don't want to wait for mi_max_threads to go to zero, since that * happens as part of a failed unmount, but this thread should only * exit when the mount/zone is really going away. * * Once MI_ASYNC_MGR_STOP is set, no more async operations will be * attempted: the various _async_*() functions know to do things * inline if mi_max_threads == 0. Henceforth we just drain out the * outstanding requests. * * Note that we still create zthreads even if we notice the zone is * shutting down (MI_ASYNC_MGR_STOP is set); this may cause the zone * shutdown sequence to take slightly longer in some cases, but * doesn't violate the protocol, as all threads will exit as soon as * they're done processing the remaining requests. */ while (!(mi->mi_flags & MI_ASYNC_MGR_STOP) || mi->mi_async_req_count > 0) { mutex_exit(&mi->mi_lock); CALLB_CPR_SAFE_BEGIN(&cprinfo); cv_wait(&mi->mi_async_reqs_cv, &mi->mi_async_lock); CALLB_CPR_SAFE_END(&cprinfo, &mi->mi_async_lock); while (mi->mi_async_req_count > 0) { /* * Paranoia: If the mount started out having * (mi->mi_max_threads == 0), and the value was * later changed (via a debugger or somesuch), * we could be confused since we will think we * can't create any threads, and the calling * code (which looks at the current value of * mi->mi_max_threads, now non-zero) thinks we * can. * * So, because we're paranoid, we create threads * up to the maximum of the original and the * current value. This means that future * (debugger-induced) lowerings of * mi->mi_max_threads are ignored for our * purposes, but who told them they could change * random values on a live kernel anyhow? */ if (mi->mi_threads < MAX(mi->mi_max_threads, max_threads)) { mi->mi_threads++; mutex_exit(&mi->mi_async_lock); VFS_HOLD(vfsp); /* hold for new thread */ (void) zthread_create(NULL, 0, nfs_async_start, vfsp, 0, minclsyspri); mutex_enter(&mi->mi_async_lock); } cv_signal(&mi->mi_async_work_cv); ASSERT(mi->mi_async_req_count != 0); mi->mi_async_req_count--; } mutex_enter(&mi->mi_lock); } mutex_exit(&mi->mi_lock); /* * Let everyone know we're done. */ mi->mi_manager_thread = NULL; cv_broadcast(&mi->mi_async_cv); /* * There is no explicit call to mutex_exit(&mi->mi_async_lock) * since CALLB_CPR_EXIT is actually responsible for releasing * 'mi_async_lock'. */ CALLB_CPR_EXIT(&cprinfo); VFS_RELE(vfsp); /* release thread's hold */ zthread_exit(); } /* * Signal (and wait for) the async manager thread to clean up and go away. */ void nfs_async_manager_stop(vfs_t *vfsp) { mntinfo_t *mi = VFTOMI(vfsp); mutex_enter(&mi->mi_async_lock); mutex_enter(&mi->mi_lock); mi->mi_flags |= MI_ASYNC_MGR_STOP; mutex_exit(&mi->mi_lock); cv_broadcast(&mi->mi_async_reqs_cv); while (mi->mi_manager_thread != NULL) cv_wait(&mi->mi_async_cv, &mi->mi_async_lock); mutex_exit(&mi->mi_async_lock); } int nfs_async_readahead(vnode_t *vp, u_offset_t blkoff, caddr_t addr, struct seg *seg, cred_t *cr, void (*readahead)(vnode_t *, u_offset_t, caddr_t, struct seg *, cred_t *)) { rnode_t *rp; mntinfo_t *mi; struct nfs_async_reqs *args; rp = VTOR(vp); ASSERT(rp->r_freef == NULL); mi = VTOMI(vp); /* * If addr falls in a different segment, don't bother doing readahead. */ if (addr >= seg->s_base + seg->s_size) return (-1); /* * If we can't allocate a request structure, punt on the readahead. */ if ((args = kmem_alloc(sizeof (*args), KM_NOSLEEP)) == NULL) return (-1); /* * If a lock operation is pending, don't initiate any new * readaheads. Otherwise, bump r_count to indicate the new * asynchronous I/O. */ if (!nfs_rw_tryenter(&rp->r_lkserlock, RW_READER)) { kmem_free(args, sizeof (*args)); return (-1); } mutex_enter(&rp->r_statelock); rp->r_count++; mutex_exit(&rp->r_statelock); nfs_rw_exit(&rp->r_lkserlock); args->a_next = NULL; #ifdef DEBUG args->a_queuer = curthread; #endif VN_HOLD(vp); args->a_vp = vp; ASSERT(cr != NULL); crhold(cr); args->a_cred = cr; args->a_io = NFS_READ_AHEAD; args->a_nfs_readahead = readahead; args->a_nfs_blkoff = blkoff; args->a_nfs_seg = seg; args->a_nfs_addr = addr; mutex_enter(&mi->mi_async_lock); /* * If asyncio has been disabled, don't bother readahead. */ if (mi->mi_max_threads == 0) { mutex_exit(&mi->mi_async_lock); goto noasync; } /* * Link request structure into the async list and * wakeup async thread to do the i/o. */ if (mi->mi_async_reqs[NFS_READ_AHEAD] == NULL) { mi->mi_async_reqs[NFS_READ_AHEAD] = args; mi->mi_async_tail[NFS_READ_AHEAD] = args; } else { mi->mi_async_tail[NFS_READ_AHEAD]->a_next = args; mi->mi_async_tail[NFS_READ_AHEAD] = args; } if (mi->mi_io_kstats) { mutex_enter(&mi->mi_lock); kstat_waitq_enter(KSTAT_IO_PTR(mi->mi_io_kstats)); mutex_exit(&mi->mi_lock); } mi->mi_async_req_count++; ASSERT(mi->mi_async_req_count != 0); cv_signal(&mi->mi_async_reqs_cv); mutex_exit(&mi->mi_async_lock); return (0); noasync: mutex_enter(&rp->r_statelock); rp->r_count--; cv_broadcast(&rp->r_cv); mutex_exit(&rp->r_statelock); VN_RELE(vp); crfree(cr); kmem_free(args, sizeof (*args)); return (-1); } int nfs_async_putapage(vnode_t *vp, page_t *pp, u_offset_t off, size_t len, int flags, cred_t *cr, int (*putapage)(vnode_t *, page_t *, u_offset_t, size_t, int, cred_t *)) { rnode_t *rp; mntinfo_t *mi; struct nfs_async_reqs *args; ASSERT(flags & B_ASYNC); ASSERT(vp->v_vfsp != NULL); rp = VTOR(vp); ASSERT(rp->r_count > 0); mi = VTOMI(vp); /* * If we can't allocate a request structure, do the putpage * operation synchronously in this thread's context. */ if ((args = kmem_alloc(sizeof (*args), KM_NOSLEEP)) == NULL) goto noasync; args->a_next = NULL; #ifdef DEBUG args->a_queuer = curthread; #endif VN_HOLD(vp); args->a_vp = vp; ASSERT(cr != NULL); crhold(cr); args->a_cred = cr; args->a_io = NFS_PUTAPAGE; args->a_nfs_putapage = putapage; args->a_nfs_pp = pp; args->a_nfs_off = off; args->a_nfs_len = (uint_t)len; args->a_nfs_flags = flags; mutex_enter(&mi->mi_async_lock); /* * If asyncio has been disabled, then make a synchronous request. * This check is done a second time in case async io was diabled * while this thread was blocked waiting for memory pressure to * reduce or for the queue to drain. */ if (mi->mi_max_threads == 0) { mutex_exit(&mi->mi_async_lock); goto noasync; } /* * Link request structure into the async list and * wakeup async thread to do the i/o. */ if (mi->mi_async_reqs[NFS_PUTAPAGE] == NULL) { mi->mi_async_reqs[NFS_PUTAPAGE] = args; mi->mi_async_tail[NFS_PUTAPAGE] = args; } else { mi->mi_async_tail[NFS_PUTAPAGE]->a_next = args; mi->mi_async_tail[NFS_PUTAPAGE] = args; } mutex_enter(&rp->r_statelock); rp->r_count++; rp->r_awcount++; mutex_exit(&rp->r_statelock); if (mi->mi_io_kstats) { mutex_enter(&mi->mi_lock); kstat_waitq_enter(KSTAT_IO_PTR(mi->mi_io_kstats)); mutex_exit(&mi->mi_lock); } mi->mi_async_req_count++; ASSERT(mi->mi_async_req_count != 0); cv_signal(&mi->mi_async_reqs_cv); mutex_exit(&mi->mi_async_lock); return (0); noasync: if (args != NULL) { VN_RELE(vp); crfree(cr); kmem_free(args, sizeof (*args)); } if (curproc == proc_pageout || curproc == proc_fsflush) { /* * If we get here in the context of the pageout/fsflush, * we refuse to do a sync write, because this may hang * pageout (and the machine). In this case, we just * re-mark the page as dirty and punt on the page. * * Make sure B_FORCE isn't set. We can re-mark the * pages as dirty and unlock the pages in one swoop by * passing in B_ERROR to pvn_write_done(). However, * we should make sure B_FORCE isn't set - we don't * want the page tossed before it gets written out. */ if (flags & B_FORCE) flags &= ~(B_INVAL | B_FORCE); pvn_write_done(pp, flags | B_ERROR); return (0); } if (nfs_zone() != mi->mi_zone) { /* * So this was a cross-zone sync putpage. We pass in B_ERROR * to pvn_write_done() to re-mark the pages as dirty and unlock * them. * * We don't want to clear B_FORCE here as the caller presumably * knows what they're doing if they set it. */ pvn_write_done(pp, flags | B_ERROR); return (EPERM); } return ((*putapage)(vp, pp, off, len, flags, cr)); } int nfs_async_pageio(vnode_t *vp, page_t *pp, u_offset_t io_off, size_t io_len, int flags, cred_t *cr, int (*pageio)(vnode_t *, page_t *, u_offset_t, size_t, int, cred_t *)) { rnode_t *rp; mntinfo_t *mi; struct nfs_async_reqs *args; ASSERT(flags & B_ASYNC); ASSERT(vp->v_vfsp != NULL); rp = VTOR(vp); ASSERT(rp->r_count > 0); mi = VTOMI(vp); /* * If we can't allocate a request structure, do the pageio * request synchronously in this thread's context. */ if ((args = kmem_alloc(sizeof (*args), KM_NOSLEEP)) == NULL) goto noasync; args->a_next = NULL; #ifdef DEBUG args->a_queuer = curthread; #endif VN_HOLD(vp); args->a_vp = vp; ASSERT(cr != NULL); crhold(cr); args->a_cred = cr; args->a_io = NFS_PAGEIO; args->a_nfs_pageio = pageio; args->a_nfs_pp = pp; args->a_nfs_off = io_off; args->a_nfs_len = (uint_t)io_len; args->a_nfs_flags = flags; mutex_enter(&mi->mi_async_lock); /* * If asyncio has been disabled, then make a synchronous request. * This check is done a second time in case async io was diabled * while this thread was blocked waiting for memory pressure to * reduce or for the queue to drain. */ if (mi->mi_max_threads == 0) { mutex_exit(&mi->mi_async_lock); goto noasync; } /* * Link request structure into the async list and * wakeup async thread to do the i/o. */ if (mi->mi_async_reqs[NFS_PAGEIO] == NULL) { mi->mi_async_reqs[NFS_PAGEIO] = args; mi->mi_async_tail[NFS_PAGEIO] = args; } else { mi->mi_async_tail[NFS_PAGEIO]->a_next = args; mi->mi_async_tail[NFS_PAGEIO] = args; } mutex_enter(&rp->r_statelock); rp->r_count++; rp->r_awcount++; mutex_exit(&rp->r_statelock); if (mi->mi_io_kstats) { mutex_enter(&mi->mi_lock); kstat_waitq_enter(KSTAT_IO_PTR(mi->mi_io_kstats)); mutex_exit(&mi->mi_lock); } mi->mi_async_req_count++; ASSERT(mi->mi_async_req_count != 0); cv_signal(&mi->mi_async_reqs_cv); mutex_exit(&mi->mi_async_lock); return (0); noasync: if (args != NULL) { VN_RELE(vp); crfree(cr); kmem_free(args, sizeof (*args)); } /* * If we can't do it ASYNC, for reads we do nothing (but cleanup * the page list), for writes we do it synchronously, except for * proc_pageout/proc_fsflush as described below. */ if (flags & B_READ) { pvn_read_done(pp, flags | B_ERROR); return (0); } if (curproc == proc_pageout || curproc == proc_fsflush) { /* * If we get here in the context of the pageout/fsflush, * we refuse to do a sync write, because this may hang * pageout/fsflush (and the machine). In this case, we just * re-mark the page as dirty and punt on the page. * * Make sure B_FORCE isn't set. We can re-mark the * pages as dirty and unlock the pages in one swoop by * passing in B_ERROR to pvn_write_done(). However, * we should make sure B_FORCE isn't set - we don't * want the page tossed before it gets written out. */ if (flags & B_FORCE) flags &= ~(B_INVAL | B_FORCE); pvn_write_done(pp, flags | B_ERROR); return (0); } if (nfs_zone() != mi->mi_zone) { /* * So this was a cross-zone sync pageio. We pass in B_ERROR * to pvn_write_done() to re-mark the pages as dirty and unlock * them. * * We don't want to clear B_FORCE here as the caller presumably * knows what they're doing if they set it. */ pvn_write_done(pp, flags | B_ERROR); return (EPERM); } return ((*pageio)(vp, pp, io_off, io_len, flags, cr)); } void nfs_async_readdir(vnode_t *vp, rddir_cache *rdc, cred_t *cr, int (*readdir)(vnode_t *, rddir_cache *, cred_t *)) { rnode_t *rp; mntinfo_t *mi; struct nfs_async_reqs *args; rp = VTOR(vp); ASSERT(rp->r_freef == NULL); mi = VTOMI(vp); /* * If we can't allocate a request structure, do the readdir * operation synchronously in this thread's context. */ if ((args = kmem_alloc(sizeof (*args), KM_NOSLEEP)) == NULL) goto noasync; args->a_next = NULL; #ifdef DEBUG args->a_queuer = curthread; #endif VN_HOLD(vp); args->a_vp = vp; ASSERT(cr != NULL); crhold(cr); args->a_cred = cr; args->a_io = NFS_READDIR; args->a_nfs_readdir = readdir; args->a_nfs_rdc = rdc; mutex_enter(&mi->mi_async_lock); /* * If asyncio has been disabled, then make a synchronous request. */ if (mi->mi_max_threads == 0) { mutex_exit(&mi->mi_async_lock); goto noasync; } /* * Link request structure into the async list and * wakeup async thread to do the i/o. */ if (mi->mi_async_reqs[NFS_READDIR] == NULL) { mi->mi_async_reqs[NFS_READDIR] = args; mi->mi_async_tail[NFS_READDIR] = args; } else { mi->mi_async_tail[NFS_READDIR]->a_next = args; mi->mi_async_tail[NFS_READDIR] = args; } mutex_enter(&rp->r_statelock); rp->r_count++; mutex_exit(&rp->r_statelock); if (mi->mi_io_kstats) { mutex_enter(&mi->mi_lock); kstat_waitq_enter(KSTAT_IO_PTR(mi->mi_io_kstats)); mutex_exit(&mi->mi_lock); } mi->mi_async_req_count++; ASSERT(mi->mi_async_req_count != 0); cv_signal(&mi->mi_async_reqs_cv); mutex_exit(&mi->mi_async_lock); return; noasync: if (args != NULL) { VN_RELE(vp); crfree(cr); kmem_free(args, sizeof (*args)); } rdc->entries = NULL; mutex_enter(&rp->r_statelock); ASSERT(rdc->flags & RDDIR); rdc->flags &= ~RDDIR; rdc->flags |= RDDIRREQ; /* * Check the flag to see if RDDIRWAIT is set. If RDDIRWAIT * is set, wakeup the thread sleeping in cv_wait_sig(). * The woken up thread will reset the flag to RDDIR and will * continue with the readdir opeartion. */ if (rdc->flags & RDDIRWAIT) { rdc->flags &= ~RDDIRWAIT; cv_broadcast(&rdc->cv); } mutex_exit(&rp->r_statelock); rddir_cache_rele(rdc); } void nfs_async_commit(vnode_t *vp, page_t *plist, offset3 offset, count3 count, cred_t *cr, void (*commit)(vnode_t *, page_t *, offset3, count3, cred_t *)) { rnode_t *rp; mntinfo_t *mi; struct nfs_async_reqs *args; page_t *pp; rp = VTOR(vp); mi = VTOMI(vp); /* * If we can't allocate a request structure, do the commit * operation synchronously in this thread's context. */ if ((args = kmem_alloc(sizeof (*args), KM_NOSLEEP)) == NULL) goto noasync; args->a_next = NULL; #ifdef DEBUG args->a_queuer = curthread; #endif VN_HOLD(vp); args->a_vp = vp; ASSERT(cr != NULL); crhold(cr); args->a_cred = cr; args->a_io = NFS_COMMIT; args->a_nfs_commit = commit; args->a_nfs_plist = plist; args->a_nfs_offset = offset; args->a_nfs_count = count; mutex_enter(&mi->mi_async_lock); /* * If asyncio has been disabled, then make a synchronous request. * This check is done a second time in case async io was diabled * while this thread was blocked waiting for memory pressure to * reduce or for the queue to drain. */ if (mi->mi_max_threads == 0) { mutex_exit(&mi->mi_async_lock); goto noasync; } /* * Link request structure into the async list and * wakeup async thread to do the i/o. */ if (mi->mi_async_reqs[NFS_COMMIT] == NULL) { mi->mi_async_reqs[NFS_COMMIT] = args; mi->mi_async_tail[NFS_COMMIT] = args; } else { mi->mi_async_tail[NFS_COMMIT]->a_next = args; mi->mi_async_tail[NFS_COMMIT] = args; } mutex_enter(&rp->r_statelock); rp->r_count++; mutex_exit(&rp->r_statelock); if (mi->mi_io_kstats) { mutex_enter(&mi->mi_lock); kstat_waitq_enter(KSTAT_IO_PTR(mi->mi_io_kstats)); mutex_exit(&mi->mi_lock); } mi->mi_async_req_count++; ASSERT(mi->mi_async_req_count != 0); cv_signal(&mi->mi_async_reqs_cv); mutex_exit(&mi->mi_async_lock); return; noasync: if (args != NULL) { VN_RELE(vp); crfree(cr); kmem_free(args, sizeof (*args)); } if (curproc == proc_pageout || curproc == proc_fsflush || nfs_zone() != mi->mi_zone) { while (plist != NULL) { pp = plist; page_sub(&plist, pp); pp->p_fsdata = C_COMMIT; page_unlock(pp); } return; } (*commit)(vp, plist, offset, count, cr); } void nfs_async_inactive(vnode_t *vp, cred_t *cr, void (*inactive)(vnode_t *, cred_t *, caller_context_t *)) { mntinfo_t *mi; struct nfs_async_reqs *args; mi = VTOMI(vp); args = kmem_alloc(sizeof (*args), KM_SLEEP); args->a_next = NULL; #ifdef DEBUG args->a_queuer = curthread; #endif args->a_vp = vp; ASSERT(cr != NULL); crhold(cr); args->a_cred = cr; args->a_io = NFS_INACTIVE; args->a_nfs_inactive = inactive; /* * Note that we don't check mi->mi_max_threads here, since we * *need* to get rid of this vnode regardless of whether someone * set nfs3_max_threads/nfs_max_threads to zero in /etc/system. * * The manager thread knows about this and is willing to create * at least one thread to accommodate us. */ mutex_enter(&mi->mi_async_lock); if (mi->mi_manager_thread == NULL) { rnode_t *rp = VTOR(vp); mutex_exit(&mi->mi_async_lock); crfree(cr); /* drop our reference */ kmem_free(args, sizeof (*args)); /* * We can't do an over-the-wire call since we're in the wrong * zone, so we need to clean up state as best we can and then * throw away the vnode. */ mutex_enter(&rp->r_statelock); if (rp->r_unldvp != NULL) { vnode_t *unldvp; char *unlname; cred_t *unlcred; unldvp = rp->r_unldvp; rp->r_unldvp = NULL; unlname = rp->r_unlname; rp->r_unlname = NULL; unlcred = rp->r_unlcred; rp->r_unlcred = NULL; mutex_exit(&rp->r_statelock); VN_RELE(unldvp); kmem_free(unlname, MAXNAMELEN); crfree(unlcred); } else { mutex_exit(&rp->r_statelock); } /* * No need to explicitly throw away any cached pages. The * eventual rinactive() will attempt a synchronous * VOP_PUTPAGE() which will immediately fail since the request * is coming from the wrong zone, and then will proceed to call * nfs_invalidate_pages() which will clean things up for us. */ rp_addfree(VTOR(vp), cr); return; } if (mi->mi_async_reqs[NFS_INACTIVE] == NULL) { mi->mi_async_reqs[NFS_INACTIVE] = args; } else { mi->mi_async_tail[NFS_INACTIVE]->a_next = args; } mi->mi_async_tail[NFS_INACTIVE] = args; /* * Don't increment r_count, since we're trying to get rid of the vnode. */ mi->mi_async_req_count++; ASSERT(mi->mi_async_req_count != 0); cv_signal(&mi->mi_async_reqs_cv); mutex_exit(&mi->mi_async_lock); } /* * The async queues for each mounted file system are arranged as a * set of queues, one for each async i/o type. Requests are taken * from the queues in a round-robin fashion. A number of consecutive * requests are taken from each queue before moving on to the next * queue. This functionality may allow the NFS Version 2 server to do * write clustering, even if the client is mixing writes and reads * because it will take multiple write requests from the queue * before processing any of the other async i/o types. * * XXX The nfs_async_start thread is unsafe in the light of the present * model defined by cpr to suspend the system. Specifically over the * wire calls are cpr-unsafe. The thread should be reevaluated in * case of future updates to the cpr model. */ static void nfs_async_start(struct vfs *vfsp) { struct nfs_async_reqs *args; mntinfo_t *mi = VFTOMI(vfsp); clock_t time_left = 1; callb_cpr_t cprinfo; int i; /* * Dynamic initialization of nfs_async_timeout to allow nfs to be * built in an implementation independent manner. */ if (nfs_async_timeout == -1) nfs_async_timeout = NFS_ASYNC_TIMEOUT; CALLB_CPR_INIT(&cprinfo, &mi->mi_async_lock, callb_generic_cpr, "nas"); mutex_enter(&mi->mi_async_lock); for (;;) { /* * Find the next queue containing an entry. We start * at the current queue pointer and then round robin * through all of them until we either find a non-empty * queue or have looked through all of them. */ for (i = 0; i < NFS_ASYNC_TYPES; i++) { args = *mi->mi_async_curr; if (args != NULL) break; mi->mi_async_curr++; if (mi->mi_async_curr == &mi->mi_async_reqs[NFS_ASYNC_TYPES]) mi->mi_async_curr = &mi->mi_async_reqs[0]; } /* * If we didn't find a entry, then block until woken up * again and then look through the queues again. */ if (args == NULL) { /* * Exiting is considered to be safe for CPR as well */ CALLB_CPR_SAFE_BEGIN(&cprinfo); /* * Wakeup thread waiting to unmount the file * system only if all async threads are inactive. * * If we've timed-out and there's nothing to do, * then get rid of this thread. */ if (mi->mi_max_threads == 0 || time_left <= 0) { if (--mi->mi_threads == 0) cv_signal(&mi->mi_async_cv); CALLB_CPR_EXIT(&cprinfo); VFS_RELE(vfsp); /* release thread's hold */ zthread_exit(); /* NOTREACHED */ } time_left = cv_reltimedwait(&mi->mi_async_work_cv, &mi->mi_async_lock, nfs_async_timeout, TR_CLOCK_TICK); CALLB_CPR_SAFE_END(&cprinfo, &mi->mi_async_lock); continue; } time_left = 1; /* * Remove the request from the async queue and then * update the current async request queue pointer. If * the current queue is empty or we have removed enough * consecutive entries from it, then reset the counter * for this queue and then move the current pointer to * the next queue. */ *mi->mi_async_curr = args->a_next; if (*mi->mi_async_curr == NULL || --mi->mi_async_clusters[args->a_io] == 0) { mi->mi_async_clusters[args->a_io] = mi->mi_async_init_clusters; mi->mi_async_curr++; if (mi->mi_async_curr == &mi->mi_async_reqs[NFS_ASYNC_TYPES]) mi->mi_async_curr = &mi->mi_async_reqs[0]; } if (args->a_io != NFS_INACTIVE && mi->mi_io_kstats) { mutex_enter(&mi->mi_lock); kstat_waitq_exit(KSTAT_IO_PTR(mi->mi_io_kstats)); mutex_exit(&mi->mi_lock); } mutex_exit(&mi->mi_async_lock); /* * Obtain arguments from the async request structure. */ if (args->a_io == NFS_READ_AHEAD && mi->mi_max_threads > 0) { (*args->a_nfs_readahead)(args->a_vp, args->a_nfs_blkoff, args->a_nfs_addr, args->a_nfs_seg, args->a_cred); } else if (args->a_io == NFS_PUTAPAGE) { (void) (*args->a_nfs_putapage)(args->a_vp, args->a_nfs_pp, args->a_nfs_off, args->a_nfs_len, args->a_nfs_flags, args->a_cred); } else if (args->a_io == NFS_PAGEIO) { (void) (*args->a_nfs_pageio)(args->a_vp, args->a_nfs_pp, args->a_nfs_off, args->a_nfs_len, args->a_nfs_flags, args->a_cred); } else if (args->a_io == NFS_READDIR) { (void) ((*args->a_nfs_readdir)(args->a_vp, args->a_nfs_rdc, args->a_cred)); } else if (args->a_io == NFS_COMMIT) { (*args->a_nfs_commit)(args->a_vp, args->a_nfs_plist, args->a_nfs_offset, args->a_nfs_count, args->a_cred); } else if (args->a_io == NFS_INACTIVE) { (*args->a_nfs_inactive)(args->a_vp, args->a_cred, NULL); } /* * Now, release the vnode and free the credentials * structure. */ free_async_args(args); /* * Reacquire the mutex because it will be needed above. */ mutex_enter(&mi->mi_async_lock); } } void nfs_async_stop(struct vfs *vfsp) { mntinfo_t *mi = VFTOMI(vfsp); /* * Wait for all outstanding async operations to complete and for the * worker threads to exit. */ mutex_enter(&mi->mi_async_lock); mi->mi_max_threads = 0; cv_broadcast(&mi->mi_async_work_cv); while (mi->mi_threads != 0) cv_wait(&mi->mi_async_cv, &mi->mi_async_lock); mutex_exit(&mi->mi_async_lock); } /* * nfs_async_stop_sig: * Wait for all outstanding putpage operation to complete. If a signal * is deliver we will abort and return non-zero. If we can put all the * pages we will return 0. This routine is called from nfs_unmount and * nfs3_unmount to make these operations interruptible. */ int nfs_async_stop_sig(struct vfs *vfsp) { mntinfo_t *mi = VFTOMI(vfsp); ushort_t omax; int rval; /* * Wait for all outstanding async operations to complete and for the * worker threads to exit. */ mutex_enter(&mi->mi_async_lock); omax = mi->mi_max_threads; mi->mi_max_threads = 0; /* * Tell all the worker threads to exit. */ cv_broadcast(&mi->mi_async_work_cv); while (mi->mi_threads != 0) { if (!cv_wait_sig(&mi->mi_async_cv, &mi->mi_async_lock)) break; } rval = (mi->mi_threads != 0); /* Interrupted */ if (rval) mi->mi_max_threads = omax; mutex_exit(&mi->mi_async_lock); return (rval); } int writerp(rnode_t *rp, caddr_t base, int tcount, struct uio *uio, int pgcreated) { int pagecreate; int n; int saved_n; caddr_t saved_base; u_offset_t offset; int error; int sm_error; vnode_t *vp = RTOV(rp); ASSERT(tcount <= MAXBSIZE && tcount <= uio->uio_resid); ASSERT(nfs_rw_lock_held(&rp->r_rwlock, RW_WRITER)); if (!vpm_enable) { ASSERT(((uintptr_t)base & MAXBOFFSET) + tcount <= MAXBSIZE); } /* * Move bytes in at most PAGESIZE chunks. We must avoid * spanning pages in uiomove() because page faults may cause * the cache to be invalidated out from under us. The r_size is not * updated until after the uiomove. If we push the last page of a * file before r_size is correct, we will lose the data written past * the current (and invalid) r_size. */ do { offset = uio->uio_loffset; pagecreate = 0; /* * n is the number of bytes required to satisfy the request * or the number of bytes to fill out the page. */ n = (int)MIN((PAGESIZE - (offset & PAGEOFFSET)), tcount); /* * Check to see if we can skip reading in the page * and just allocate the memory. We can do this * if we are going to rewrite the entire mapping * or if we are going to write to or beyond the current * end of file from the beginning of the mapping. * * The read of r_size is now protected by r_statelock. */ mutex_enter(&rp->r_statelock); /* * When pgcreated is nonzero the caller has already done * a segmap_getmapflt with forcefault 0 and S_WRITE. With * segkpm this means we already have at least one page * created and mapped at base. */ pagecreate = pgcreated || ((offset & PAGEOFFSET) == 0 && (n == PAGESIZE || ((offset + n) >= rp->r_size))); mutex_exit(&rp->r_statelock); if (!vpm_enable && pagecreate) { /* * The last argument tells segmap_pagecreate() to * always lock the page, as opposed to sometimes * returning with the page locked. This way we avoid a * fault on the ensuing uiomove(), but also * more importantly (to fix bug 1094402) we can * call segmap_fault() to unlock the page in all * cases. An alternative would be to modify * segmap_pagecreate() to tell us when it is * locking a page, but that's a fairly major * interface change. */ if (pgcreated == 0) (void) segmap_pagecreate(segkmap, base, (uint_t)n, 1); saved_base = base; saved_n = n; } /* * The number of bytes of data in the last page can not * be accurately be determined while page is being * uiomove'd to and the size of the file being updated. * Thus, inform threads which need to know accurately * how much data is in the last page of the file. They * will not do the i/o immediately, but will arrange for * the i/o to happen later when this modify operation * will have finished. */ ASSERT(!(rp->r_flags & RMODINPROGRESS)); mutex_enter(&rp->r_statelock); rp->r_flags |= RMODINPROGRESS; rp->r_modaddr = (offset & MAXBMASK); mutex_exit(&rp->r_statelock); if (vpm_enable) { /* * Copy data. If new pages are created, part of * the page that is not written will be initizliazed * with zeros. */ error = vpm_data_copy(vp, offset, n, uio, !pagecreate, NULL, 0, S_WRITE); } else { error = uiomove(base, n, UIO_WRITE, uio); } /* * r_size is the maximum number of * bytes known to be in the file. * Make sure it is at least as high as the * first unwritten byte pointed to by uio_loffset. */ mutex_enter(&rp->r_statelock); if (rp->r_size < uio->uio_loffset) rp->r_size = uio->uio_loffset; rp->r_flags &= ~RMODINPROGRESS; rp->r_flags |= RDIRTY; mutex_exit(&rp->r_statelock); /* n = # of bytes written */ n = (int)(uio->uio_loffset - offset); if (!vpm_enable) { base += n; } tcount -= n; /* * If we created pages w/o initializing them completely, * we need to zero the part that wasn't set up. * This happens on a most EOF write cases and if * we had some sort of error during the uiomove. */ if (!vpm_enable && pagecreate) { if ((uio->uio_loffset & PAGEOFFSET) || n == 0) (void) kzero(base, PAGESIZE - n); if (pgcreated) { /* * Caller is responsible for this page, * it was not created in this loop. */ pgcreated = 0; } else { /* * For bug 1094402: segmap_pagecreate locks * page. Unlock it. This also unlocks the * pages allocated by page_create_va() in * segmap_pagecreate(). */ sm_error = segmap_fault(kas.a_hat, segkmap, saved_base, saved_n, F_SOFTUNLOCK, S_WRITE); if (error == 0) error = sm_error; } } } while (tcount > 0 && error == 0); return (error); } int nfs_putpages(vnode_t *vp, u_offset_t off, size_t len, int flags, cred_t *cr) { rnode_t *rp; page_t *pp; u_offset_t eoff; u_offset_t io_off; size_t io_len; int error; int rdirty; int err; rp = VTOR(vp); ASSERT(rp->r_count > 0); if (!vn_has_cached_data(vp)) return (0); ASSERT(vp->v_type != VCHR); /* * If ROUTOFSPACE is set, then all writes turn into B_INVAL * writes. B_FORCE is set to force the VM system to actually * invalidate the pages, even if the i/o failed. The pages * need to get invalidated because they can't be written out * because there isn't any space left on either the server's * file system or in the user's disk quota. The B_FREE bit * is cleared to avoid confusion as to whether this is a * request to place the page on the freelist or to destroy * it. */ if ((rp->r_flags & ROUTOFSPACE) || (vp->v_vfsp->vfs_flag & VFS_UNMOUNTED)) flags = (flags & ~B_FREE) | B_INVAL | B_FORCE; if (len == 0) { /* * If doing a full file synchronous operation, then clear * the RDIRTY bit. If a page gets dirtied while the flush * is happening, then RDIRTY will get set again. The * RDIRTY bit must get cleared before the flush so that * we don't lose this information. * * If there are no full file async write operations * pending and RDIRTY bit is set, clear it. */ if (off == (u_offset_t)0 && !(flags & B_ASYNC) && (rp->r_flags & RDIRTY)) { mutex_enter(&rp->r_statelock); rdirty = (rp->r_flags & RDIRTY); rp->r_flags &= ~RDIRTY; mutex_exit(&rp->r_statelock); } else if (flags & B_ASYNC && off == (u_offset_t)0) { mutex_enter(&rp->r_statelock); if (rp->r_flags & RDIRTY && rp->r_awcount == 0) { rdirty = (rp->r_flags & RDIRTY); rp->r_flags &= ~RDIRTY; } mutex_exit(&rp->r_statelock); } else rdirty = 0; /* * Search the entire vp list for pages >= off, and flush * the dirty pages. */ error = pvn_vplist_dirty(vp, off, rp->r_putapage, flags, cr); /* * If an error occurred and the file was marked as dirty * before and we aren't forcibly invalidating pages, then * reset the RDIRTY flag. */ if (error && rdirty && (flags & (B_INVAL | B_FORCE)) != (B_INVAL | B_FORCE)) { mutex_enter(&rp->r_statelock); rp->r_flags |= RDIRTY; mutex_exit(&rp->r_statelock); } } else { /* * Do a range from [off...off + len) looking for pages * to deal with. */ error = 0; #ifdef lint io_len = 0; #endif eoff = off + len; mutex_enter(&rp->r_statelock); for (io_off = off; io_off < eoff && io_off < rp->r_size; io_off += io_len) { mutex_exit(&rp->r_statelock); /* * If we are not invalidating, synchronously * freeing or writing pages use the routine * page_lookup_nowait() to prevent reclaiming * them from the free list. */ if ((flags & B_INVAL) || !(flags & B_ASYNC)) { pp = page_lookup(vp, io_off, (flags & (B_INVAL | B_FREE)) ? SE_EXCL : SE_SHARED); } else { pp = page_lookup_nowait(vp, io_off, (flags & B_FREE) ? SE_EXCL : SE_SHARED); } if (pp == NULL || !pvn_getdirty(pp, flags)) io_len = PAGESIZE; else { err = (*rp->r_putapage)(vp, pp, &io_off, &io_len, flags, cr); if (!error) error = err; /* * "io_off" and "io_len" are returned as * the range of pages we actually wrote. * This allows us to skip ahead more quickly * since several pages may've been dealt * with by this iteration of the loop. */ } mutex_enter(&rp->r_statelock); } mutex_exit(&rp->r_statelock); } return (error); } void nfs_invalidate_pages(vnode_t *vp, u_offset_t off, cred_t *cr) { rnode_t *rp; rp = VTOR(vp); mutex_enter(&rp->r_statelock); while (rp->r_flags & RTRUNCATE) cv_wait(&rp->r_cv, &rp->r_statelock); rp->r_flags |= RTRUNCATE; if (off == (u_offset_t)0) { rp->r_flags &= ~RDIRTY; if (!(rp->r_flags & RSTALE)) rp->r_error = 0; } rp->r_truncaddr = off; mutex_exit(&rp->r_statelock); (void) pvn_vplist_dirty(vp, off, rp->r_putapage, B_INVAL | B_TRUNC, cr); mutex_enter(&rp->r_statelock); rp->r_flags &= ~RTRUNCATE; cv_broadcast(&rp->r_cv); mutex_exit(&rp->r_statelock); } static int nfs_write_error_to_cons_only = 0; #define MSG(x) (nfs_write_error_to_cons_only ? (x) : (x) + 1) /* * Print a file handle */ void nfs_printfhandle(nfs_fhandle *fhp) { int *ip; char *buf; size_t bufsize; char *cp; /* * 13 == "(file handle:" * maximum of NFS_FHANDLE / sizeof (*ip) elements in fh_buf times * 1 == ' ' * 8 == maximum strlen of "%x" * 3 == ")\n\0" */ bufsize = 13 + ((NFS_FHANDLE_LEN / sizeof (*ip)) * (1 + 8)) + 3; buf = kmem_alloc(bufsize, KM_NOSLEEP); if (buf == NULL) return; cp = buf; (void) strcpy(cp, "(file handle:"); while (*cp != '\0') cp++; for (ip = (int *)fhp->fh_buf; ip < (int *)&fhp->fh_buf[fhp->fh_len]; ip++) { (void) sprintf(cp, " %x", *ip); while (*cp != '\0') cp++; } (void) strcpy(cp, ")\n"); zcmn_err(getzoneid(), CE_CONT, MSG("^%s"), buf); kmem_free(buf, bufsize); } /* * Notify the system administrator that an NFS write error has * occurred. */ /* seconds between ENOSPC/EDQUOT messages */ clock_t nfs_write_error_interval = 5; void nfs_write_error(vnode_t *vp, int error, cred_t *cr) { mntinfo_t *mi; clock_t now; mi = VTOMI(vp); /* * In case of forced unmount or zone shutdown, do not print any * messages since it can flood the console with error messages. */ if (FS_OR_ZONE_GONE(mi->mi_vfsp)) return; /* * No use in flooding the console with ENOSPC * messages from the same file system. */ now = ddi_get_lbolt(); if ((error != ENOSPC && error != EDQUOT) || now - mi->mi_printftime > 0) { zoneid_t zoneid = mi->mi_zone->zone_id; #ifdef DEBUG nfs_perror(error, "NFS%ld write error on host %s: %m.\n", mi->mi_vers, VTOR(vp)->r_server->sv_hostname, NULL); #else nfs_perror(error, "NFS write error on host %s: %m.\n", VTOR(vp)->r_server->sv_hostname, NULL); #endif if (error == ENOSPC || error == EDQUOT) { zcmn_err(zoneid, CE_CONT, MSG("^File: userid=%d, groupid=%d\n"), crgetuid(cr), crgetgid(cr)); if (crgetuid(CRED()) != crgetuid(cr) || crgetgid(CRED()) != crgetgid(cr)) { zcmn_err(zoneid, CE_CONT, MSG("^User: userid=%d, groupid=%d\n"), crgetuid(CRED()), crgetgid(CRED())); } mi->mi_printftime = now + nfs_write_error_interval * hz; } nfs_printfhandle(&VTOR(vp)->r_fh); #ifdef DEBUG if (error == EACCES) { zcmn_err(zoneid, CE_CONT, MSG("^nfs_bio: cred is%s kcred\n"), cr == kcred ? "" : " not"); } #endif } } /* ARGSUSED */ static void * nfs_mi_init(zoneid_t zoneid) { struct mi_globals *mig; mig = kmem_alloc(sizeof (*mig), KM_SLEEP); mutex_init(&mig->mig_lock, NULL, MUTEX_DEFAULT, NULL); list_create(&mig->mig_list, sizeof (mntinfo_t), offsetof(mntinfo_t, mi_zone_node)); mig->mig_destructor_called = B_FALSE; return (mig); } /* * Callback routine to tell all NFS mounts in the zone to stop creating new * threads. Existing threads should exit. */ /* ARGSUSED */ static void nfs_mi_shutdown(zoneid_t zoneid, void *data) { struct mi_globals *mig = data; mntinfo_t *mi; ASSERT(mig != NULL); again: mutex_enter(&mig->mig_lock); for (mi = list_head(&mig->mig_list); mi != NULL; mi = list_next(&mig->mig_list, mi)) { /* * If we've done the shutdown work for this FS, skip. * Once we go off the end of the list, we're done. */ if (mi->mi_flags & MI_DEAD) continue; /* * We will do work, so not done. Get a hold on the FS. */ VFS_HOLD(mi->mi_vfsp); /* * purge the DNLC for this filesystem */ (void) dnlc_purge_vfsp(mi->mi_vfsp, 0); mutex_enter(&mi->mi_async_lock); /* * Tell existing async worker threads to exit. */ mi->mi_max_threads = 0; cv_broadcast(&mi->mi_async_work_cv); /* * Set MI_ASYNC_MGR_STOP so the async manager thread starts * getting ready to exit when it's done with its current work. * Also set MI_DEAD to note we've acted on this FS. */ mutex_enter(&mi->mi_lock); mi->mi_flags |= (MI_ASYNC_MGR_STOP|MI_DEAD); mutex_exit(&mi->mi_lock); /* * Wake up the async manager thread. */ cv_broadcast(&mi->mi_async_reqs_cv); mutex_exit(&mi->mi_async_lock); /* * Drop lock and release FS, which may change list, then repeat. * We're done when every mi has been done or the list is empty. */ mutex_exit(&mig->mig_lock); VFS_RELE(mi->mi_vfsp); goto again; } mutex_exit(&mig->mig_lock); } static void nfs_mi_free_globals(struct mi_globals *mig) { list_destroy(&mig->mig_list); /* makes sure the list is empty */ mutex_destroy(&mig->mig_lock); kmem_free(mig, sizeof (*mig)); } /* ARGSUSED */ static void nfs_mi_destroy(zoneid_t zoneid, void *data) { struct mi_globals *mig = data; ASSERT(mig != NULL); mutex_enter(&mig->mig_lock); if (list_head(&mig->mig_list) != NULL) { /* Still waiting for VFS_FREEVFS() */ mig->mig_destructor_called = B_TRUE; mutex_exit(&mig->mig_lock); return; } nfs_mi_free_globals(mig); } /* * Add an NFS mount to the per-zone list of NFS mounts. */ void nfs_mi_zonelist_add(mntinfo_t *mi) { struct mi_globals *mig; mig = zone_getspecific(mi_list_key, mi->mi_zone); mutex_enter(&mig->mig_lock); list_insert_head(&mig->mig_list, mi); mutex_exit(&mig->mig_lock); } /* * Remove an NFS mount from the per-zone list of NFS mounts. */ static void nfs_mi_zonelist_remove(mntinfo_t *mi) { struct mi_globals *mig; mig = zone_getspecific(mi_list_key, mi->mi_zone); mutex_enter(&mig->mig_lock); list_remove(&mig->mig_list, mi); /* * We can be called asynchronously by VFS_FREEVFS() after the zone * shutdown/destroy callbacks have executed; if so, clean up the zone's * mi globals. */ if (list_head(&mig->mig_list) == NULL && mig->mig_destructor_called == B_TRUE) { nfs_mi_free_globals(mig); return; } mutex_exit(&mig->mig_lock); } /* * NFS Client initialization routine. This routine should only be called * once. It performs the following tasks: * - Initalize all global locks * - Call sub-initialization routines (localize access to variables) */ int nfs_clntinit(void) { #ifdef DEBUG static boolean_t nfs_clntup = B_FALSE; #endif int error; #ifdef DEBUG ASSERT(nfs_clntup == B_FALSE); #endif error = nfs_subrinit(); if (error) return (error); error = nfs_vfsinit(); if (error) { /* * Cleanup nfs_subrinit() work */ nfs_subrfini(); return (error); } zone_key_create(&mi_list_key, nfs_mi_init, nfs_mi_shutdown, nfs_mi_destroy); nfs4_clnt_init(); #ifdef DEBUG nfs_clntup = B_TRUE; #endif return (0); } /* * This routine is only called if the NFS Client has been initialized but * the module failed to be installed. This routine will cleanup the previously * allocated/initialized work. */ void nfs_clntfini(void) { (void) zone_key_delete(mi_list_key); nfs_subrfini(); nfs_vfsfini(); nfs4_clnt_fini(); } /* * nfs_lockrelease: * * Release any locks on the given vnode that are held by the current * process. */ void nfs_lockrelease(vnode_t *vp, int flag, offset_t offset, cred_t *cr) { flock64_t ld; struct shrlock shr; char *buf; int remote_lock_possible; int ret; ASSERT((uintptr_t)vp > KERNELBASE); /* * Generate an explicit unlock operation for the entire file. As a * partial optimization, only generate the unlock if there is a * lock registered for the file. We could check whether this * particular process has any locks on the file, but that would * require the local locking code to provide yet another query * routine. Note that no explicit synchronization is needed here. * At worst, flk_has_remote_locks() will return a false positive, * in which case the unlock call wastes time but doesn't harm * correctness. * * In addition, an unlock request is generated if the process * is listed as possibly having a lock on the file because the * server and client lock managers may have gotten out of sync. * N.B. It is important to make sure nfs_remove_locking_id() is * called here even if flk_has_remote_locks(vp) reports true. * If it is not called and there is an entry on the process id * list, that entry will never get removed. */ remote_lock_possible = nfs_remove_locking_id(vp, RLMPL_PID, (char *)&(ttoproc(curthread)->p_pid), NULL, NULL); if (remote_lock_possible || flk_has_remote_locks(vp)) { ld.l_type = F_UNLCK; /* set to unlock entire file */ ld.l_whence = 0; /* unlock from start of file */ ld.l_start = 0; ld.l_len = 0; /* do entire file */ ret = VOP_FRLOCK(vp, F_SETLK, &ld, flag, offset, NULL, cr, NULL); if (ret != 0) { /* * If VOP_FRLOCK fails, make sure we unregister * local locks before we continue. */ ld.l_pid = ttoproc(curthread)->p_pid; lm_register_lock_locally(vp, NULL, &ld, flag, offset); #ifdef DEBUG nfs_perror(ret, "NFS lock release error on vp %p: %m.\n", (void *)vp, NULL); #endif } /* * The call to VOP_FRLOCK may put the pid back on the * list. We need to remove it. */ (void) nfs_remove_locking_id(vp, RLMPL_PID, (char *)&(ttoproc(curthread)->p_pid), NULL, NULL); } /* * As long as the vp has a share matching our pid, * pluck it off and unshare it. There are circumstances in * which the call to nfs_remove_locking_id() may put the * owner back on the list, in which case we simply do a * redundant and harmless unshare. */ buf = kmem_alloc(MAX_SHR_OWNER_LEN, KM_SLEEP); while (nfs_remove_locking_id(vp, RLMPL_OWNER, (char *)NULL, buf, &shr.s_own_len)) { shr.s_owner = buf; shr.s_access = 0; shr.s_deny = 0; shr.s_sysid = 0; shr.s_pid = curproc->p_pid; ret = VOP_SHRLOCK(vp, F_UNSHARE, &shr, flag, cr, NULL); #ifdef DEBUG if (ret != 0) { nfs_perror(ret, "NFS share release error on vp %p: %m.\n", (void *)vp, NULL); } #endif } kmem_free(buf, MAX_SHR_OWNER_LEN); } /* * nfs_lockcompletion: * * If the vnode has a lock that makes it unsafe to cache the file, mark it * as non cachable (set VNOCACHE bit). */ void nfs_lockcompletion(vnode_t *vp, int cmd) { #ifdef DEBUG rnode_t *rp = VTOR(vp); ASSERT(nfs_rw_lock_held(&rp->r_lkserlock, RW_WRITER)); #endif if (cmd == F_SETLK || cmd == F_SETLKW) { if (!lm_safemap(vp)) { mutex_enter(&vp->v_lock); vp->v_flag |= VNOCACHE; mutex_exit(&vp->v_lock); } else { mutex_enter(&vp->v_lock); vp->v_flag &= ~VNOCACHE; mutex_exit(&vp->v_lock); } } /* * The cached attributes of the file are stale after acquiring * the lock on the file. They were updated when the file was * opened, but not updated when the lock was acquired. Therefore the * cached attributes are invalidated after the lock is obtained. */ PURGE_ATTRCACHE(vp); } /* * The lock manager holds state making it possible for the client * and server to be out of sync. For example, if the response from * the server granting a lock request is lost, the server will think * the lock is granted and the client will think the lock is lost. * The client can tell when it is not positive if it is in sync with * the server. * * To deal with this, a list of processes for which the client is * not sure if the server holds a lock is attached to the rnode. * When such a process closes the rnode, an unlock request is sent * to the server to unlock the entire file. * * The list is kept as a singularly linked NULL terminated list. * Because it is only added to under extreme error conditions, the * list shouldn't get very big. DEBUG kernels print a message if * the list gets bigger than nfs_lmpl_high_water. This is arbitrarily * choosen to be 8, but can be tuned at runtime. */ #ifdef DEBUG /* int nfs_lmpl_high_water = 8; */ int nfs_lmpl_high_water = 128; int nfs_cnt_add_locking_id = 0; int nfs_len_add_locking_id = 0; #endif /* DEBUG */ /* * Record that the nfs lock manager server may be holding a lock on * a vnode for a process. * * Because the nfs lock manager server holds state, it is possible * for the server to get out of sync with the client. This routine is called * from the client when it is no longer sure if the server is in sync * with the client. nfs_lockrelease() will then notice this and send * an unlock request when the file is closed */ void nfs_add_locking_id(vnode_t *vp, pid_t pid, int type, char *id, int len) { rnode_t *rp; lmpl_t *new; lmpl_t *cur; lmpl_t **lmplp; #ifdef DEBUG int list_len = 1; #endif /* DEBUG */ #ifdef DEBUG ++nfs_cnt_add_locking_id; #endif /* DEBUG */ /* * allocate new lmpl_t now so we don't sleep * later after grabbing mutexes */ ASSERT(len < MAX_SHR_OWNER_LEN); new = kmem_alloc(sizeof (*new), KM_SLEEP); new->lmpl_type = type; new->lmpl_pid = pid; new->lmpl_owner = kmem_alloc(len, KM_SLEEP); bcopy(id, new->lmpl_owner, len); new->lmpl_own_len = len; new->lmpl_next = (lmpl_t *)NULL; #ifdef DEBUG if (type == RLMPL_PID) { ASSERT(len == sizeof (pid_t)); ASSERT(pid == *(pid_t *)new->lmpl_owner); } else { ASSERT(type == RLMPL_OWNER); } #endif rp = VTOR(vp); mutex_enter(&rp->r_statelock); /* * Add this id to the list for this rnode only if the * rnode is active and the id is not already there. */ ASSERT(rp->r_flags & RHASHED); lmplp = &(rp->r_lmpl); for (cur = rp->r_lmpl; cur != (lmpl_t *)NULL; cur = cur->lmpl_next) { if (cur->lmpl_pid == pid && cur->lmpl_type == type && cur->lmpl_own_len == len && bcmp(cur->lmpl_owner, new->lmpl_owner, len) == 0) { kmem_free(new->lmpl_owner, len); kmem_free(new, sizeof (*new)); break; } lmplp = &cur->lmpl_next; #ifdef DEBUG ++list_len; #endif /* DEBUG */ } if (cur == (lmpl_t *)NULL) { *lmplp = new; #ifdef DEBUG if (list_len > nfs_len_add_locking_id) { nfs_len_add_locking_id = list_len; } if (list_len > nfs_lmpl_high_water) { cmn_err(CE_WARN, "nfs_add_locking_id: long list " "vp=%p is %d", (void *)vp, list_len); } #endif /* DEBUG */ } #ifdef DEBUG if (share_debug) { int nitems = 0; int npids = 0; int nowners = 0; /* * Count the number of things left on r_lmpl after the remove. */ for (cur = rp->r_lmpl; cur != (lmpl_t *)NULL; cur = cur->lmpl_next) { nitems++; if (cur->lmpl_type == RLMPL_PID) { npids++; } else if (cur->lmpl_type == RLMPL_OWNER) { nowners++; } else { cmn_err(CE_PANIC, "nfs_add_locking_id: " "unrecognized lmpl_type %d", cur->lmpl_type); } } cmn_err(CE_CONT, "nfs_add_locking_id(%s): %d PIDs + %d " "OWNs = %d items left on r_lmpl\n", (type == RLMPL_PID) ? "P" : "O", npids, nowners, nitems); } #endif mutex_exit(&rp->r_statelock); } /* * Remove an id from the lock manager id list. * * If the id is not in the list return 0. If it was found and * removed, return 1. */ static int nfs_remove_locking_id(vnode_t *vp, int type, char *id, char *rid, int *rlen) { lmpl_t *cur; lmpl_t **lmplp; rnode_t *rp; int rv = 0; ASSERT(type == RLMPL_PID || type == RLMPL_OWNER); rp = VTOR(vp); mutex_enter(&rp->r_statelock); ASSERT(rp->r_flags & RHASHED); lmplp = &(rp->r_lmpl); /* * Search through the list and remove the entry for this id * if it is there. The special case id == NULL allows removal * of the first share on the r_lmpl list belonging to the * current process (if any), without regard to further details * of its identity. */ for (cur = rp->r_lmpl; cur != (lmpl_t *)NULL; cur = cur->lmpl_next) { if (cur->lmpl_type == type && cur->lmpl_pid == curproc->p_pid && (id == (char *)NULL || bcmp(cur->lmpl_owner, id, cur->lmpl_own_len) == 0)) { *lmplp = cur->lmpl_next; ASSERT(cur->lmpl_own_len < MAX_SHR_OWNER_LEN); if (rid != NULL) { bcopy(cur->lmpl_owner, rid, cur->lmpl_own_len); *rlen = cur->lmpl_own_len; } kmem_free(cur->lmpl_owner, cur->lmpl_own_len); kmem_free(cur, sizeof (*cur)); rv = 1; break; } lmplp = &cur->lmpl_next; } #ifdef DEBUG if (share_debug) { int nitems = 0; int npids = 0; int nowners = 0; /* * Count the number of things left on r_lmpl after the remove. */ for (cur = rp->r_lmpl; cur != (lmpl_t *)NULL; cur = cur->lmpl_next) { nitems++; if (cur->lmpl_type == RLMPL_PID) { npids++; } else if (cur->lmpl_type == RLMPL_OWNER) { nowners++; } else { cmn_err(CE_PANIC, "nrli: unrecognized lmpl_type %d", cur->lmpl_type); } } cmn_err(CE_CONT, "nrli(%s): %d PIDs + %d OWNs = %d items left on r_lmpl\n", (type == RLMPL_PID) ? "P" : "O", npids, nowners, nitems); } #endif mutex_exit(&rp->r_statelock); return (rv); } void nfs_free_mi(mntinfo_t *mi) { ASSERT(mi->mi_flags & MI_ASYNC_MGR_STOP); ASSERT(mi->mi_manager_thread == NULL); ASSERT(mi->mi_threads == 0); /* * Remove the node from the global list before we start tearing it down. */ nfs_mi_zonelist_remove(mi); if (mi->mi_klmconfig) { lm_free_config(mi->mi_klmconfig); kmem_free(mi->mi_klmconfig, sizeof (struct knetconfig)); } mutex_destroy(&mi->mi_lock); mutex_destroy(&mi->mi_remap_lock); mutex_destroy(&mi->mi_async_lock); cv_destroy(&mi->mi_failover_cv); cv_destroy(&mi->mi_async_work_cv); cv_destroy(&mi->mi_async_reqs_cv); cv_destroy(&mi->mi_async_cv); zone_rele(mi->mi_zone); kmem_free(mi, sizeof (*mi)); } static int mnt_kstat_update(kstat_t *ksp, int rw) { mntinfo_t *mi; struct mntinfo_kstat *mik; vfs_t *vfsp; int i; /* this is a read-only kstat. Bail out on a write */ if (rw == KSTAT_WRITE) return (EACCES); /* * We don't want to wait here as kstat_chain_lock could be held by * dounmount(). dounmount() takes vfs_reflock before the chain lock * and thus could lead to a deadlock. */ vfsp = (struct vfs *)ksp->ks_private; mi = VFTOMI(vfsp); mik = (struct mntinfo_kstat *)ksp->ks_data; (void) strcpy(mik->mik_proto, mi->mi_curr_serv->sv_knconf->knc_proto); mik->mik_vers = (uint32_t)mi->mi_vers; mik->mik_flags = mi->mi_flags; mik->mik_secmod = mi->mi_curr_serv->sv_secdata->secmod; mik->mik_curread = (uint32_t)mi->mi_curread; mik->mik_curwrite = (uint32_t)mi->mi_curwrite; mik->mik_retrans = mi->mi_retrans; mik->mik_timeo = mi->mi_timeo; mik->mik_acregmin = HR2SEC(mi->mi_acregmin); mik->mik_acregmax = HR2SEC(mi->mi_acregmax); mik->mik_acdirmin = HR2SEC(mi->mi_acdirmin); mik->mik_acdirmax = HR2SEC(mi->mi_acdirmax); for (i = 0; i < NFS_CALLTYPES + 1; i++) { mik->mik_timers[i].srtt = (uint32_t)mi->mi_timers[i].rt_srtt; mik->mik_timers[i].deviate = (uint32_t)mi->mi_timers[i].rt_deviate; mik->mik_timers[i].rtxcur = (uint32_t)mi->mi_timers[i].rt_rtxcur; } mik->mik_noresponse = (uint32_t)mi->mi_noresponse; mik->mik_failover = (uint32_t)mi->mi_failover; mik->mik_remap = (uint32_t)mi->mi_remap; (void) strcpy(mik->mik_curserver, mi->mi_curr_serv->sv_hostname); return (0); } void nfs_mnt_kstat_init(struct vfs *vfsp) { mntinfo_t *mi = VFTOMI(vfsp); /* * Create the version specific kstats. * * PSARC 2001/697 Contract Private Interface * All nfs kstats are under SunMC contract * Please refer to the PSARC listed above and contact * SunMC before making any changes! * * Changes must be reviewed by Solaris File Sharing * Changes must be communicated to contract-2001-697@sun.com * */ mi->mi_io_kstats = kstat_create_zone("nfs", getminor(vfsp->vfs_dev), NULL, "nfs", KSTAT_TYPE_IO, 1, 0, mi->mi_zone->zone_id); if (mi->mi_io_kstats) { if (mi->mi_zone->zone_id != GLOBAL_ZONEID) kstat_zone_add(mi->mi_io_kstats, GLOBAL_ZONEID); mi->mi_io_kstats->ks_lock = &mi->mi_lock; kstat_install(mi->mi_io_kstats); } if ((mi->mi_ro_kstats = kstat_create_zone("nfs", getminor(vfsp->vfs_dev), "mntinfo", "misc", KSTAT_TYPE_RAW, sizeof (struct mntinfo_kstat), 0, mi->mi_zone->zone_id)) != NULL) { if (mi->mi_zone->zone_id != GLOBAL_ZONEID) kstat_zone_add(mi->mi_ro_kstats, GLOBAL_ZONEID); mi->mi_ro_kstats->ks_update = mnt_kstat_update; mi->mi_ro_kstats->ks_private = (void *)vfsp; kstat_install(mi->mi_ro_kstats); } } nfs_delmapcall_t * nfs_init_delmapcall() { nfs_delmapcall_t *delmap_call; delmap_call = kmem_alloc(sizeof (nfs_delmapcall_t), KM_SLEEP); delmap_call->call_id = curthread; delmap_call->error = 0; return (delmap_call); } void nfs_free_delmapcall(nfs_delmapcall_t *delmap_call) { kmem_free(delmap_call, sizeof (nfs_delmapcall_t)); } /* * Searches for the current delmap caller (based on curthread) in the list of * callers. If it is found, we remove it and free the delmap caller. * Returns: * 0 if the caller wasn't found * 1 if the caller was found, removed and freed. *errp is set to what * the result of the delmap was. */ int nfs_find_and_delete_delmapcall(rnode_t *rp, int *errp) { nfs_delmapcall_t *delmap_call; /* * If the list doesn't exist yet, we create it and return * that the caller wasn't found. No list = no callers. */ mutex_enter(&rp->r_statelock); if (!(rp->r_flags & RDELMAPLIST)) { /* The list does not exist */ list_create(&rp->r_indelmap, sizeof (nfs_delmapcall_t), offsetof(nfs_delmapcall_t, call_node)); rp->r_flags |= RDELMAPLIST; mutex_exit(&rp->r_statelock); return (0); } else { /* The list exists so search it */ for (delmap_call = list_head(&rp->r_indelmap); delmap_call != NULL; delmap_call = list_next(&rp->r_indelmap, delmap_call)) { if (delmap_call->call_id == curthread) { /* current caller is in the list */ *errp = delmap_call->error; list_remove(&rp->r_indelmap, delmap_call); mutex_exit(&rp->r_statelock); nfs_free_delmapcall(delmap_call); return (1); } } } mutex_exit(&rp->r_statelock); return (0); }