'\" te
.\" Copyright (c) 2008, Sun Microsystems, Inc.  All Rights Reserved
.\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
.\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
.TH IPNAT 7I "May 22, 2008"
.SH NAME
ipnat \- IP Filter/NAT module interface
.SH DESCRIPTION
.sp
.LP
The \fBipnat\fR device provides interfaction with the NAT features of the
Solaris IPFilter.
.SH APPLICATION PROGRAMMING INTERFACE
.sp
.LP
The NAT features programming model is a component of the Solaris IP Filter and
is accessed via the NAT device file \fB/dev/ipnat\fR.  Opening the device for
reading or writing determines which ioctl calls can be successfully made.
.SH IOCTLS
.sp
.LP
The caller must construct a \fBipfobj\fR structure when issuing a
\fBSIOCGNATL\fR or \fBSIOCSTPUT\fR. The \fBipfobj\fR structure is then passed
to the ioctl call and is filled out with ipfo_type set to \fBIPFOBJ_value\fR.
\fBIPFOBJ_ value\fR provides a matching name for the structure, while ipfo_size
is set to the total size of the structure being passed and ipfo_ptr is set to
the structure address. The ipfo_rev structure should be set to the current
value of IPFILTER_VERSION, while ipfo_offset and ipfo_xxxpad should be set to
0.
.sp
.in +2
.nf
/*
    * Structure used with SIOCGNATL/SIOCSTPUT.
    */
   /*
    * Object structure description.  For passing through in ioctls.
    */
   typedef struct  ipfobj  {
        u_32_t  ipfo_rev;         /* IPFilter version (IPFILTER_VERSION) */
        u_32_t  ipfo_size;        /* size of object at ipfo_ptr */
        void    *ipfo_ptr;        /* pointer to object */
        int     ipfo_type;        /* type of object being pointed to */
        int     ipfo_offset;      /* bytes from ipfo_ptr where to start */
        u_char  ipfo_xxxpad[32];  /* reserved for future use */
   } ipfobj_t;

   #define IPFILTER_VERSION        4010901 /* IPFilter version */
   #define IPFOBJ_NATSAVE          8       /* struct nat_save */
   #define IPFOBJ_NATLOOKUP        9       /* struct natlookup */
.fi
.in -2

.sp
.LP
The following ioctl() calls may be used to manipulate the ipnat sub-system
inside of ipf. Note that the ipnat driver only accept calls from applications
using the same data model as the kernel. In other words, 64-bit kernels can
only accept calls from 64-bit applications. Calls from 32-bit applications fail
with \fBEINVAL\fR.
.sp
.ne 2
.na
\fB\fBSIOCSTLCK\fR\fR
.ad
.RS 13n
Set or clear the NAT lock to prevent table updates attributable to packet
flow-through.
.RE

.sp
.ne 2
.na
\fB\fBSIOCGNATL\fR\fR
.ad
.RS 13n
Search the NAT table for the rdr entry that matches the fields in the natlookup
structure. The caller must populate the structure with the address/port
information of the accepted TCP connection (nl_inip, nl_inport)  and the
address/port information of the peer (nl_outip, nl_outport). The nl_flags field
must have the IPN_TCP option set. All other fields must be set to  0. If the
call  succeeds, nl_realip  and nl_realport are set to the  real destination
address and port, respectively. The nl_inport and  nl_outport fields must be in
host byte order.
.sp
If \fBIPN_FINDFORWARD\fR is set in nl_flags, a check is made to see if it is
possible to create an outgoing NAT session by checking if a packet coming from
(nl_realip,nl_realport) and destined for (nl_outip,nl_outport) can be
translated.  If translation is possible, the flag remains set, otherwise it is
cleared in the structure returned to the caller.
.sp
.in +2
.nf
     /*
      * Structure used with SIOCGNATL.
      */
     typedef struct natlookup {
          i6addr_t  nl_inipaddr;
          i6addr_t  nl_outipaddr;
          i6addr_t  nl_realipaddr;
          int       nl_v;
          int       nl_flags;
          u_short   nl_inport;
          u_short   nl_outport;
          u_short   nl_realport;
     } natlookup_t

    #define nl_inip       nl_inipaddr.in4
    #define nl_outip      nl_outipaddr.in4
    #define nl_realip     nl_realipaddr.in4
    #define nl_inip6      nl_inipaddr.in6
    #define nl_outip6     nl_outipaddr.in6
    #define nl_realip6    nl_realipaddr.in6

     /*
      * Accepted values for nl_flags
      */
     #define   IPN_TCP         0x00001
     #define   IPN_FINDFORWARD 0x400000
.fi
.in -2

.RE

.sp
.ne 2
.na
\fB\fBSIOCSTPUT\fR\fR
.ad
.RS 13n
Move a NAT mapping  structure from user space into the kernel. This ioctl is
used by \fBipfs\fR(1M) to restore NAT sessions saved in
\fB/var/db/ipf/ipnat.ipf\fR. The nat_save structure must have its ipn_nat and
ipn_ipnat structures filled out correctly. Fields not assigned a value must be
initialised to  0. All pointer fields are adjusted, as appropriate, once the
structure is passed into the kernel and none are preserved.
.sp
To create a translation, the following fields must be set:
.br
.in +2
Interface name - The interface name on which the host is to be exited must be
set in nat_ifnames[0].
.in -2
.br
.in +2
Local IP address and port number - The connection's local IP address and port
number are stored in network byte order using  nat_inip/nat_inport.
.in -2
.br
.in +2
Destination address/port - The destination address/port  are stored in
nat_oip/nat_oport.
.in -2
.br
.in +2
Target address/port - The translation's target address/port is stored in
nat_outip/nat_outport.
.in -2
The caller must also precalculate the checksum adjustments necessary to
complete the translation and store those values in nat_sumd (delta required for
TCP  header) and nat_ipsumd (delta required for IP header).
.sp
.in +2
.nf
/*
      * Structures used with SIOCSTPUT.
      */
     typedef struct  nat_save    {
          void    *ipn_next;
          struct  nat     ipn_nat;
          struct  ipnat   ipn_ipnat;
          struct  frentry ipn_fr;
          int     ipn_dsize;
          char    ipn_data[4];
     } nat_save_t;

     typedef struct  nat     {
          ipfmutex_t      nat_lock;
          struct  nat     *nat_next;
          struct  nat     **nat_pnext;
          struct  nat     *nat_hnext[2];
          struct  nat     **nat_phnext[2];
          struct  hostmap *nat_hm;
          void            *nat_data;
          struct  nat     **nat_me;
          struct  ipstate *nat_state;
          struct  ap_session      *nat_aps;
          frentry_t       *nat_fr;
          struct  ipnat   *nat_ptr;
          void            *nat_ifps[2];
          void            *nat_sync;
          ipftqent_t      nat_tqe;
          u_32_t          nat_flags;
          u_32_t          nat_sumd[2];
          u_32_t          nat_ipsumd;
          u_32_t          nat_mssclamp;
          i6addr_t        nat_inip6;
          i6addr_t        nat_outip6;
          i6addr_t        nat_oip6;
          U_QUAD_T        nat_pkts[2];
          U_QUAD_T        nat_bytes[2];
          union   {
               udpinfo_t       nat_unu;
               tcpinfo_t       nat_unt;
               icmpinfo_t      nat_uni;
               greinfo_t       nat_ugre;
          } nat_un;
          u_short         nat_oport;
          u_short         nat_use;
          u_char          nat_p;
          int             nat_dir;
          int             nat_ref;
          int             nat_hv[2];
          char            nat_ifnames[2][LIFNAMSIZ];
          int             nat_rev;
	         int             nat_v;
     } nat_t;

     #define nat_inip        nat_inip6.in4
     #define nat_outip       nat_outip6.in4
     #define nat_oip         nat_oip6.in4
     #define nat_inport      nat_un.nat_unt.ts_sport
     #define nat_outport     nat_un.nat_unt.ts_dport
     /*
      * Values for nat_dir
      */
     #define NAT_INBOUND     0
     #define NAT_OUTBOUND    1
     /*
      * Definitions for nat_flags
      */
     #define NAT_TCP         0x0001  /* IPN_TCP */
.fi
.in -2

.RE

.SH EXAMPLES
.sp
.LP
The following example shows how to prepare and use \fBSIOCSTPUT\fR to insert a
NAT session directly into the table. Note that the usual TCP/IP code is omitted
is this example.
.sp
.LP
In the code segment below, incoming_fd is the TCP connection file descriptor
that is accepted as part of the redirect process, while remote_fd is the
outgoing TCP connection to the remote server being translated back to  the
original IP address/port pair.
.LP
Note -
.sp
.RS 2
The following ipnat headers must be included before you can use the code shown
in this example:
.sp
.in +2
.nf
#include <netinet/in.h>
#include <arpa/inet.h>
#include <net/if.h>
#include <netinet/ipl.h>
#include <netinet/ip_compat.h>
#include <netinet/ip_fil.h>
#include <netinet/ip_nat.h>
#include <string.h>
#include <fcntl.h>
.fi
.in -2

.RE
.LP
Note -
.sp
.RS 2
In the example below, various code fragments have been excluded to enhance
clarity.
.RE
.sp
.in +2
.nf
int
     translate_connection(int incoming_fd)
     {
          struct sockaddr_in usin;
          struct natlookup nlp;
          struct nat_save ns;
          struct ipfobj obj;
          struct nat *nat;
          int remote_fd;
          int nat_fd;
          int onoff;

          memset(&ns, 0, sizeof(ns));
          nat = &ns.ipn_nat

          namelen = sizeof(usin);
          getsockname(remote_fd, (struct sockaddr *)&usin, &namelen);

          namelen = sizeof(sin);
          getpeername(incoming_fd, (struct sockaddr *) &sin, &namelen);

          namelen = sizeof(sloc);
          getsockname(incoming_fd, (struct sockaddr *) &sloc, &namelen);

          bzero((char *) &obi, sizeof(obj));
          obj.ipfo_rev = IPFILTER_VERSION;
          obj.ipfo_size = sizeof(nlp);
          obj.ipfo_ptr = &nip;
          obj.ipfo_type = IPFOBJ_NATLOOKUP;

          /*
           * Build up the NAT natlookup structure.
           */
          bzero((char *) &nlp, sizeof(nlp));
          nlp.nl_outip = sin.sin_addr;
          nlp.nl_inip = sloc.sin_addr;
          nlp.nl_flags = IPN_TCP;
          nlp.nl_outport = ntohs(sin.sin_port);
          nlp.nl_inport = ntohs(sloc.sin_port);

          /*
           * Open the NAT device and lookup the mapping pair.
           */
          nat_fd = open(IPNAT_NAME, O_RDWR);
          if (ioctl(nat_fd, SIOCGNATL, &obj) != 0)
               return -1;

          nat->nat_inip = usin.sin_addr;
          nat->nat_outip = nlp.nl_outip;
          nat->nat_oip = nlp.nl_realip;

          sum1 = LONG_SUM(ntohl(usin.sin_addr.s_addr)) +
                 ntohs(usin.sin_port);
          sum2 = LONG_SUM(ntohl(nat->nat_outip.s_addr)) +
                 ntohs(nlp.nl_outport);
          CALC_SUMD(sum1, sum2, sumd);
          nat->nat_sumd[0] = (sumd & 0xffff) + (sumd >> 16);
          nat->nat_sumd[1] = nat->nat_sumd[0];

          sum1 = LONG_SUM(ntohl(usin.sin_addr.s_addr));
          sum2 = LONG_SUM(ntohl(nat->nat_outip.s_addr));
          CALC_SUMD(sum1, sum2, sumd);
          nat->nat_ipsumd = (sumd & 0xffff) + (sumd >> 16);

          nat->nat_inport = usin.sin_port;
          nat->nat_outport = nlp.nl_outport;
          nat->nat_oport = nlp.nl_realport;

          nat->nat_flags = IPN_TCPUDP;

          /*
           * Prepare the ipfobj structure, accordingly.
           */
          bzero((char *)&obi, sizeof(obj));
          obj.ipfo_rev = IPFILTER_VERSION;
          obj.ipfo_size = sizeof(*nsp);
          obj.ipfo_ptr = nsp;
          obj.ipfo_type = IPFOBJ_NATSAVE;

          onoff = 1;
          if (ioctl(nat_fd, SIOCSTPUT, &obj) != 0)
               fprintf(stderr, "Error occurred\en");

          return connect(rem_fd, (struct sockaddr ) &usin, sizeof(usin));
     }
.fi
.in -2

.SH ERRORS
.sp
.ne 2
.na
\fBEPERM\fR
.ad
.RS 10n
The device has been opened for reading only. To succeed, the ioctl call must be
opened for both reading and writing. The call may be returned if it is
privileged and the calling process did not assert  {\fBPRIV_SYS_NET_CONFIG\fR}
in the effective set.
.RE

.sp
.ne 2
.na
\fBENOMEM\fR
.ad
.RS 10n
More memory was allocated than the kernel can provide. The call may also be
returned if the application inserts a NAT entry that exceeds the hash bucket
chain's maximum length.
.RE

.sp
.ne 2
.na
\fBEFAULT\fR
.ad
.RS 10n
The calling process specified an invalid pointer in the ipfobj structure.
.RE

.sp
.ne 2
.na
\fBEINVAL\fR
.ad
.RS 10n
The calling process detected a parameter or field set to an unacceptable value.
.RE

.sp
.ne 2
.na
\fBEEXIST\fR
.ad
.RS 10n
The calling process, via \fBSIOCSTPUT\fR, attempted to add a NAT entry that
already exists in the NAT table.
.RE

.sp
.ne 2
.na
\fBESRCH\fR
.ad
.RS 10n
The calling process called \fBSIOCSTPUT\fR before setting the SI_NEWFR flag and
providing a pointer in the nat_fr  field that cannot  be found in the current
rule set.
.RE

.sp
.ne 2
.na
\fBEACESS\fR
.ad
.RS 10n
The calling process issued a \fBSIOCSTPUT\fR before issuing a SIOCSTLCK.
.RE

.SH ATTRIBUTES
.sp
.LP
See \fBattributes\fR(5) for descriptions of the following attributes:
.sp

.sp
.TS
box;
c | c
l | l .
ATTRIBUTE TYPE	ATTRIBUTE VALUE
_
Interface Stability	Committed
.TE

.SH SEE ALSO
.sp
.LP
\fBipfs\fR(1M), \fBipnat\fR(1M), \fBioctl\fR(2), \fBattributes\fR(5)