/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" .file "%M%" /* * The strlcpy() function copies at most dstsize-1 characters * (dstsize being the size of the string buffer dst) from src * to dst, truncating src if necessary. The result is always * null-terminated. The function returns strlen(src). Buffer * overflow can be checked as follows: * * if (strlcpy(dst, src, dstsize) >= dstsize) * return -1; */ #include ! strlcpy implementation is similar to that of strcpy, except ! in this case, the maximum size of the detination must be ! tracked since it bounds our maximum copy size. However, ! we must still continue to check for zero since the routine ! is expected to null-terminate any string that is within ! the dest size bound. ! ! this method starts by checking for and arranging source alignment. ! Once this has occurred, we copy based upon destination alignment. ! This is either by xword, word, halfword, or byte. As this occurs, we ! check for a zero-byte. If one is found, we branch to a method ! which checks for the exact location of a zero-byte within a ! larger xword/word/half-word quantity. ENTRY(strlcpy) .align 32 save %sp, -SA(WINDOWSIZE), %sp subcc %g0, %i2, %g4 ! n = -n, n == 0 ? bz,pn %ncc, .getstrlen ! n == 0, must determine strlen add %i1, %i2, %i3 ! src = src + n andcc %i1, 7, %i4 ! src dword aligned ? bz,pn %ncc, .dwordaligned ! yup add %i0, %i2, %i2 ! dst = dst + n sub %i4, 8, %i4 ! bytes until src aligned .alignsrc: ldub [%i3 + %g4], %l1 ! src[] andcc %l1, 0xff, %g0 ! end of src reached (null byte) ? stub %l1, [%i2 + %g4] ! dst[] = src[] bz,a %ncc, .done ! yes, done add %i2, %g4, %i2 ! need single dest pointer for strlen addcc %g4, 1, %g4 ! src++, dst++, n-- bz,pn %ncc, .forcenullunalign ! n == 0, force null byte, compute len addcc %i4, 1, %i4 ! src aligned now? bnz,a %ncc, .alignsrc ! no, copy another byte nop ! pad .dwordaligned: sethi %hi(0x01010101), %i4 ! Alan Mycroft's magic1 add %i2, %g4, %l0 ! dst or %i4, %lo(0x01010101),%i4! finish loading magic1 and %l0, 3, %g1 ! dst<1:0> to examine offset sllx %i4, 32, %l1 ! spread magic1 cmp %g1, 1 ! dst offset of 1 or 5 or %i4, %l1, %i4 ! to all 64 bits sub %i2, 8, %i2 ! adjust for dest pre-incr in cpy loops be,pn %ncc, .storebyte1241 ! store 1, 2, 4, 1 bytes sllx %i4, 7, %i5 ! Alan Mycroft's magic2 cmp %g1, 3 ! dst offset of 3 or 7 be,pn %ncc, .storebyte1421 ! store 1, 4, 2, 1 bytes cmp %g1, 2 ! dst halfword aligned ? be,pn %ncc, .storehalfword ! yup, store half-word wise andcc %l0, 7, %g0 ! dst word aligned ? bnz,pn %ncc, .storeword2 ! yup, store word wise nop ! ensure loop is 16-byte aligned nop ! ensure loop is 16-byte aligned .storedword: ldx [%i3 + %g4], %l1 ! src dword addcc %g4, 8, %g4 ! n += 8, src += 8, dst += 8 bcs,pn %ncc, .lastword ! if counter wraps, last word andn %i5, %l1, %g1 ! ~dword & 0x8080808080808080 sub %l1, %i4, %l0 ! dword - 0x0101010101010101 andcc %l0, %g1, %g0 ! ((dword - 0x0101010101010101) & ~dword & 0x8080808080808080) bz,a,pt %ncc, .storedword ! no zero byte if magic expression == 0 stx %l1, [%i2 + %g4] ! store word to dst (address pre-incremented) ! n has not expired, but src is at the end. we need to push out the ! remaining src bytes. Since strlen(dts) == strlen(src), we can ! compute the return value as the difference of final dst pointer ! and the pointer to the start of dst .zerobyte: add %i2, %g4, %i2 ! pointer to dest string srlx %l1, 56, %g1 ! first byte andcc %g1, 0xff, %g0 ! end of string ? bz,pn %ncc, .done ! yup, copy done, return length stb %g1, [%i2] ! store it add %i2, 1, %i2 ! dst++ srlx %l1, 48, %g1 ! second byte andcc %g1, 0xff, %g0 ! end of string ? bz,pn %ncc, .done ! yup, copy done, return length stb %g1, [%i2] ! store it add %i2, 1, %i2 ! dst++ srlx %l1, 40, %g1 ! third byte andcc %g1, 0xff, %g0 ! end of string ? bz,pn %ncc, .done ! yup, copy done, return length stb %g1, [%i2] ! store it add %i2, 1, %i2 ! dst++ srlx %l1, 32, %g1 ! fourth byte andcc %g1, 0xff, %g0 ! end of string ? bz,pn %ncc, .done ! yup, copy done, return length stb %g1, [%i2] ! store it add %i2, 1, %i2 ! dst++ srlx %l1, 24, %g1 ! fifth byte andcc %g1, 0xff, %g0 ! end of string ? bz,pn %ncc, .done ! yup, copy done, return length stb %g1, [%i2] ! store it add %i2, 1, %i2 ! dst++ srlx %l1, 16, %g1 ! sixth byte andcc %g1, 0xff, %g0 ! end of string ? bz,pn %ncc, .done ! yup, copy done, return length stb %g1, [%i2] ! store it add %i2, 1, %i2 ! dst++ srlx %l1, 8, %g1 ! seventh byte andcc %g1, 0xff, %g0 ! end of string ? bz,pn %ncc, .done ! yup, copy done, return length stb %g1, [%i2] ! store it stb %l1, [%i2 + 1] ! store eigth byte add %i2, 1, %i2 ! dst++ .done: sub %i2, %i0, %i0 ! len = dst - orig dst ret ! subroutine done restore %i0, %g0, %o0 ! restore register window, return len ! n expired, so this is the last word. It may contain null bytes. ! Store bytes until n == 0. If a null byte is encountered during ! processing of this last src word, we are done. Otherwise continue ! to scan src until we hit the end, and compute strlen from the ! difference between the pointer past the last byte of src and the ! original pointer to the start of src .lastword: add %i2, %g4, %i2 ! we want a single dst pointer here sub %g4, 8, %g4 ! undo counter pre-increment add %i3, %g4, %i3 ! we want a single src pointer here srlx %l1, 56, %g1 ! first byte andcc %g1, 0xff, %g0 ! end of src reached ? bz,pn %ncc, .done ! yup stb %g1, [%i2] ! store it inccc %g4 ! n-- bz .forcenull ! if n == 0, force null byte, compute len srlx %l1, 48, %g1 ! second byte add %i2, 1, %i2 ! dst++ andcc %g1, 0xff, %g0 ! end of src reached ? bz,pn %ncc, .done ! yup stb %g1, [%i2] ! store it inccc %g4 ! n-- bz .forcenull ! if n == 0, force null byte, compute len srlx %l1, 40, %g1 ! third byte add %i2, 1, %i2 ! dst++ andcc %g1, 0xff, %g0 ! end of src reached ? bz,pn %ncc, .done ! yup stb %g1, [%i2] ! store it inccc %g4 ! n-- bz .forcenull ! if n == 0, force null byte, compute strlen srlx %l1, 32, %g1 ! fourth byte add %i2, 1, %i2 ! dst++ andcc %g1, 0xff, %g0 ! end of src reached ? bz,pn %ncc, .done ! yup stb %g1, [%i2] ! store it inccc %g4 ! n-- bz .forcenull ! if n == 0, force null byte, compute strlen srlx %l1, 24, %g1 ! fifth byte add %i2, 1, %i2 ! dst++ andcc %g1, 0xff, %g0 ! end of src reached ? bz,pn %ncc, .done ! yup stb %g1, [%i2] ! store it inccc %g4 ! n-- bz .forcenull ! if n == 0, force null byte, compute strlen srlx %l1, 16, %g1 ! sixth byte add %i2, 1, %i2 ! dst++ andcc %g1, 0xff, %g0 ! end of src reached ? bz,pn %ncc, .done ! yup stb %g1, [%i2] ! store it inccc %g4 ! n-- bz .forcenull ! if n == 0, force null byte, compute strlen srlx %l1, 8, %g1 ! seventh byte add %i2, 1, %i2 ! dst++ andcc %g1, 0xff, %g0 ! end of src reached ? bz,pn %ncc, .done ! yup stb %g1, [%i2] ! store it inccc %g4 ! n-- bz .forcenull ! if n == 0, force null byte, compute strlen andcc %l1, 0xff, %g0 ! end of src reached ? add %i2, 1, %i2 ! dst++ bz,pn %ncc, .done ! yup stb %l1, [%i2] ! store eigth byte ! we need to force a null byte in the last position of dst ! %i2 points to the location .forcenull: stb %g0, [%i2] ! force string terminating null byte ! here: %i1 points to src start ! %i3 points is current src ptr (8-byte aligned) .searchword: ldx [%i3], %l1 ! src dword .searchword2: andn %i5, %l1, %g1 ! ~dword & 0x8080808080808080 sub %l1, %i4, %l0 ! dword - 0x0101010101010101 andcc %l0, %g1, %g0 ! ((dword - 0x0101010101010101) & ~dword & 0x80808080 bz,a,pt %ncc, .searchword ! no null byte if expression is 0 add %i3, 8, %i3 ! src += 8 mov 0xff, %i5 ! create byte mask for null byte scanning sllx %i5, 56, %i5 ! mask for 1st byte = 0xff0000000000000000 .searchbyte: andcc %l1, %i5, %g0 ! current byte zero? srlx %i5, 8, %i5 ! byte mask for next byte bnz,a %ncc, .searchbyte ! current byte != zero, continue search add %i3, 1, %i3 ! src++ .endfound: sub %i3, %i1, %i0 ! len = src - orig src ret ! done restore %i0, %g0, %o0 ! restore register window, return len nop ! align loop on 16-byte .storebyte1421: ldx [%i3 + %g4], %l1 ! x = src[] addcc %g4, 8, %g4 ! src += 8, dst += 8 bcs,pn %ncc, .lastword ! if counter wraps, last word andn %i5, %l1, %g1 ! ~x & 0x8080808080808080 sub %l1, %i4, %l0 ! x - 0x0101010101010101 andcc %l0, %g1, %g0 ! ((x - 0x0101010101010101) & ~x & 0x8080808080808080) bnz,pn %ncc, .zerobyte ! end of src found, may need to pad add %i2, %g4, %l0 ! dst (in pointer form) srlx %l1, 56, %g1 ! %g1<7:0> = first byte; word aligned now stb %g1, [%l0] ! store first byte srlx %l1, 24, %g1 ! %g1<31:0> = bytes 2, 3, 4, 5 stw %g1, [%l0 + 1] ! store bytes 2, 3, 4, 5 srlx %l1, 8, %g1 ! %g1<15:0> = bytes 6, 7 sth %g1, [%l0 + 5] ! store bytes 6, 7 ba .storebyte1421 ! next dword stb %l1, [%l0 + 7] ! store eigth byte .storebyte1241: ldx [%i3 + %g4], %l1 ! x = src[] addcc %g4, 8, %g4 ! src += 8, dst += 8 bcs,pn %ncc, .lastword ! if counter wraps, last word andn %i5, %l1, %g1 ! ~x & 0x8080808080808080 sub %l1, %i4, %l0 ! x - 0x0101010101010101 andcc %l0, %g1, %g0 ! ((x - 0x0101010101010101) & ~x & 0x8080808080808080) bnz,pn %ncc, .zerobyte ! x has zero byte, handle end cases add %i2, %g4, %l0 ! dst (in pointer form) srlx %l1, 56, %g1 ! %g1<7:0> = first byte; half-word aligned now stb %g1, [%l0] ! store first byte srlx %l1, 40, %g1 ! %g1<15:0> = bytes 2, 3 sth %g1, [%l0 + 1] ! store bytes 2, 3 srlx %l1, 8, %g1 ! %g1<31:0> = bytes 4, 5, 6, 7 stw %g1, [%l0 + 3] ! store bytes 4, 5, 6, 7 ba .storebyte1241 ! next dword stb %l1, [%l0 + 7] ! store eigth byte .storehalfword: ldx [%i3 + %g4], %l1 ! x = src[] addcc %g4, 8, %g4 ! src += 8, dst += 8 bcs,pn %ncc, .lastword ! if counter wraps, last word andn %i5, %l1, %g1 ! ~x & 0x8080808080808080 sub %l1, %i4, %l0 ! x - 0x0101010101010101 andcc %l0, %g1, %g0 ! ((x - 0x0101010101010101) & ~x & 0x8080808080808080) bnz,pn %ncc, .zerobyte ! x has zero byte, handle end cases add %i2, %g4, %l0 ! dst (in pointer form) srlx %l1, 48, %g1 ! %g1<15:0> = bytes 1, 2; word aligned now sth %g1, [%l0] ! store bytes 1, 2 srlx %l1, 16, %g1 ! %g1<31:0> = bytes 3, 4, 5, 6 stw %g1, [%l0 + 2] ! store bytes 3, 4, 5, 6 ba .storehalfword ! next dword sth %l1, [%l0 + 6] ! store bytes 7, 8 nop ! align next loop to 16-byte boundary nop ! align next loop to 16-byte boundary .storeword2: ldx [%i3 + %g4], %l1 ! x = src[] addcc %g4, 8, %g4 ! src += 8, dst += 8 bcs,pn %ncc, .lastword ! if counter wraps, last word andn %i5, %l1, %g1 ! ~x & 0x8080808080808080 sub %l1, %i4, %l0 ! x - 0x0101010101010101 andcc %l0, %g1, %g0 ! ((x - 0x0101010101010101) & ~x & 0x8080808080808080) bnz,pn %ncc, .zerobyte ! x has zero byte, handle end cases add %i2, %g4, %l0 ! dst (in pointer form) srlx %l1, 32, %g1 ! %g1<31:0> = bytes 1, 2, 3, 4 stw %g1, [%l0] ! store bytes 1, 2, 3, 4 ba .storeword2 ! next dword stw %l1, [%l0 + 4] ! store bytes 5, 6, 7, 8 ! n expired, i.e. end of destination buffer reached. Force null ! null termination of dst, then scan src until end foudn for ! determination of strlen(src) ! ! here: %i3 points to current src byte ! %i2 points one byte past end of dst ! magic constants not loaded .forcenullunalign: add %i2, %g4, %i2 ! we need a single dst ptr stb %g0, [%i2 - 1] ! force string terminating null byte .getstrlen: sethi %hi(0x01010101), %i4 ! Alan Mycroft's magic1 or %i4, %lo(0x01010101),%i4! finish loading magic1 sllx %i4, 32, %i2 ! spread magic1 or %i4, %i2, %i4 ! to all 64 bits sllx %i4, 7, %i5 ! Alan Mycroft's magic2 nop ! align loop to 16-byte boundary .getstrlenloop: andcc %i3, 7, %g0 ! src dword aligned? bz,a,pn %ncc, .searchword2 ! yup, now search a dword at a time ldx [%i3], %l1 ! src dword ldub [%i3], %l1 ! load src byte andcc %l1, 0xff, %g0 ! end of src reached? bnz,a %ncc, .getstrlenloop ! yup, return length add %i3, 1, %i3 ! src++ sub %i3, %i1, %i0 ! len = src - orig src ret ! done restore %i0, %g0, %o0 ! restore register window, return len nop ! pad tp 16-byte boundary nop ! pad tp 16-byte boundary SET_SIZE(strlcpy)