/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" .file "%M%" #include #if defined(_KERNEL) /* * Legacy kernel interfaces; they will go away (eventually). */ ANSI_PRAGMA_WEAK2(cas8,atomic_cas_8,function) ANSI_PRAGMA_WEAK2(cas32,atomic_cas_32,function) ANSI_PRAGMA_WEAK2(cas64,atomic_cas_64,function) ANSI_PRAGMA_WEAK2(caslong,atomic_cas_ulong,function) ANSI_PRAGMA_WEAK2(casptr,atomic_cas_ptr,function) ANSI_PRAGMA_WEAK2(atomic_and_long,atomic_and_ulong,function) ANSI_PRAGMA_WEAK2(atomic_or_long,atomic_or_ulong,function) ANSI_PRAGMA_WEAK2(swapl,atomic_swap_32,function) #endif /* * NOTE: If atomic_inc_8 and atomic_inc_8_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_inc_8_nv. */ ENTRY(atomic_inc_8) ALTENTRY(atomic_inc_8_nv) ALTENTRY(atomic_inc_uchar) ALTENTRY(atomic_inc_uchar_nv) ba add_8 add %g0, 1, %o1 SET_SIZE(atomic_inc_uchar_nv) SET_SIZE(atomic_inc_uchar) SET_SIZE(atomic_inc_8_nv) SET_SIZE(atomic_inc_8) /* * NOTE: If atomic_dec_8 and atomic_dec_8_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_dec_8_nv. */ ENTRY(atomic_dec_8) ALTENTRY(atomic_dec_8_nv) ALTENTRY(atomic_dec_uchar) ALTENTRY(atomic_dec_uchar_nv) ba add_8 sub %g0, 1, %o1 SET_SIZE(atomic_dec_uchar_nv) SET_SIZE(atomic_dec_uchar) SET_SIZE(atomic_dec_8_nv) SET_SIZE(atomic_dec_8) /* * NOTE: If atomic_add_8 and atomic_add_8_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_add_8_nv. */ ENTRY(atomic_add_8) ALTENTRY(atomic_add_8_nv) ALTENTRY(atomic_add_char) ALTENTRY(atomic_add_char_nv) add_8: and %o0, 0x3, %o4 ! %o4 = byte offset, left-to-right xor %o4, 0x3, %g1 ! %g1 = byte offset, right-to-left sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left set 0xff, %o3 ! %o3 = mask sll %o3, %g1, %o3 ! %o3 = shifted to bit offset sll %o1, %g1, %o1 ! %o1 = shifted to bit offset and %o1, %o3, %o1 ! %o1 = single byte value andn %o0, 0x3, %o0 ! %o0 = word address ld [%o0], %o2 ! read old value 1: add %o2, %o1, %o5 ! add value to the old value and %o5, %o3, %o5 ! clear other bits andn %o2, %o3, %o4 ! clear target bits or %o4, %o5, %o5 ! insert the new value cas [%o0], %o2, %o5 cmp %o2, %o5 bne,a,pn %icc, 1b mov %o5, %o2 ! %o2 = old value add %o2, %o1, %o5 and %o5, %o3, %o5 retl srl %o5, %g1, %o0 ! %o0 = new value SET_SIZE(atomic_add_char_nv) SET_SIZE(atomic_add_char) SET_SIZE(atomic_add_8_nv) SET_SIZE(atomic_add_8) /* * NOTE: If atomic_inc_16 and atomic_inc_16_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_inc_16_nv. */ ENTRY(atomic_inc_16) ALTENTRY(atomic_inc_16_nv) ALTENTRY(atomic_inc_ushort) ALTENTRY(atomic_inc_ushort_nv) ba add_16 add %g0, 1, %o1 SET_SIZE(atomic_inc_ushort_nv) SET_SIZE(atomic_inc_ushort) SET_SIZE(atomic_inc_16_nv) SET_SIZE(atomic_inc_16) /* * NOTE: If atomic_dec_16 and atomic_dec_16_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_dec_16_nv. */ ENTRY(atomic_dec_16) ALTENTRY(atomic_dec_16_nv) ALTENTRY(atomic_dec_ushort) ALTENTRY(atomic_dec_ushort_nv) ba add_16 sub %g0, 1, %o1 SET_SIZE(atomic_dec_ushort_nv) SET_SIZE(atomic_dec_ushort) SET_SIZE(atomic_dec_16_nv) SET_SIZE(atomic_dec_16) /* * NOTE: If atomic_add_16 and atomic_add_16_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_add_16_nv. */ ENTRY(atomic_add_16) ALTENTRY(atomic_add_16_nv) ALTENTRY(atomic_add_short) ALTENTRY(atomic_add_short_nv) add_16: and %o0, 0x2, %o4 ! %o4 = byte offset, left-to-right xor %o4, 0x2, %g1 ! %g1 = byte offset, right-to-left sll %o4, 3, %o4 ! %o4 = bit offset, left-to-right sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left sethi %hi(0xffff0000), %o3 ! %o3 = mask srl %o3, %o4, %o3 ! %o3 = shifted to bit offset sll %o1, %g1, %o1 ! %o1 = shifted to bit offset and %o1, %o3, %o1 ! %o1 = single short value andn %o0, 0x2, %o0 ! %o0 = word address ! if low-order bit is 1, we will properly get an alignment fault here ld [%o0], %o2 ! read old value 1: add %o1, %o2, %o5 ! add value to the old value and %o5, %o3, %o5 ! clear other bits andn %o2, %o3, %o4 ! clear target bits or %o4, %o5, %o5 ! insert the new value cas [%o0], %o2, %o5 cmp %o2, %o5 bne,a,pn %icc, 1b mov %o5, %o2 ! %o2 = old value add %o1, %o2, %o5 and %o5, %o3, %o5 retl srl %o5, %g1, %o0 ! %o0 = new value SET_SIZE(atomic_add_short_nv) SET_SIZE(atomic_add_short) SET_SIZE(atomic_add_16_nv) SET_SIZE(atomic_add_16) /* * NOTE: If atomic_inc_32 and atomic_inc_32_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_inc_32_nv. */ ENTRY(atomic_inc_32) ALTENTRY(atomic_inc_32_nv) ALTENTRY(atomic_inc_uint) ALTENTRY(atomic_inc_uint_nv) ALTENTRY(atomic_inc_ulong) ALTENTRY(atomic_inc_ulong_nv) ba add_32 add %g0, 1, %o1 SET_SIZE(atomic_inc_ulong_nv) SET_SIZE(atomic_inc_ulong) SET_SIZE(atomic_inc_uint_nv) SET_SIZE(atomic_inc_uint) SET_SIZE(atomic_inc_32_nv) SET_SIZE(atomic_inc_32) /* * NOTE: If atomic_dec_32 and atomic_dec_32_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_dec_32_nv. */ ENTRY(atomic_dec_32) ALTENTRY(atomic_dec_32_nv) ALTENTRY(atomic_dec_uint) ALTENTRY(atomic_dec_uint_nv) ALTENTRY(atomic_dec_ulong) ALTENTRY(atomic_dec_ulong_nv) ba add_32 sub %g0, 1, %o1 SET_SIZE(atomic_dec_ulong_nv) SET_SIZE(atomic_dec_ulong) SET_SIZE(atomic_dec_uint_nv) SET_SIZE(atomic_dec_uint) SET_SIZE(atomic_dec_32_nv) SET_SIZE(atomic_dec_32) /* * NOTE: If atomic_add_32 and atomic_add_32_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_add_32_nv. */ ENTRY(atomic_add_32) ALTENTRY(atomic_add_32_nv) ALTENTRY(atomic_add_int) ALTENTRY(atomic_add_int_nv) ALTENTRY(atomic_add_ptr) ALTENTRY(atomic_add_ptr_nv) ALTENTRY(atomic_add_long) ALTENTRY(atomic_add_long_nv) add_32: ld [%o0], %o2 1: add %o2, %o1, %o3 cas [%o0], %o2, %o3 cmp %o2, %o3 bne,a,pn %icc, 1b mov %o3, %o2 retl add %o2, %o1, %o0 ! return new value SET_SIZE(atomic_add_long_nv) SET_SIZE(atomic_add_long) SET_SIZE(atomic_add_ptr_nv) SET_SIZE(atomic_add_ptr) SET_SIZE(atomic_add_int_nv) SET_SIZE(atomic_add_int) SET_SIZE(atomic_add_32_nv) SET_SIZE(atomic_add_32) /* * NOTE: If atomic_inc_64 and atomic_inc_64_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_inc_64_nv. */ ENTRY(atomic_inc_64) ALTENTRY(atomic_inc_64_nv) ba add_64 add %g0, 1, %o1 SET_SIZE(atomic_inc_64_nv) SET_SIZE(atomic_inc_64) /* * NOTE: If atomic_dec_64 and atomic_dec_64_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_dec_64_nv. */ ENTRY(atomic_dec_64) ALTENTRY(atomic_dec_64_nv) ba add_64 sub %g0, 1, %o1 SET_SIZE(atomic_dec_64_nv) SET_SIZE(atomic_dec_64) /* * NOTE: If atomic_add_64 and atomic_add_64_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_add_64_nv. */ ENTRY(atomic_add_64) ALTENTRY(atomic_add_64_nv) sllx %o1, 32, %o1 ! upper 32 in %o1, lower in %o2 srl %o2, 0, %o2 add %o1, %o2, %o1 ! convert 2 32-bit args into 1 64-bit add_64: ldx [%o0], %o2 1: add %o2, %o1, %o3 casx [%o0], %o2, %o3 cmp %o2, %o3 bne,a,pn %xcc, 1b mov %o3, %o2 add %o2, %o1, %o1 ! return lower 32-bits in %o1 retl srlx %o1, 32, %o0 ! return upper 32-bits in %o0 SET_SIZE(atomic_add_64_nv) SET_SIZE(atomic_add_64) /* * NOTE: If atomic_or_8 and atomic_or_8_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_or_8_nv. */ ENTRY(atomic_or_8) ALTENTRY(atomic_or_8_nv) ALTENTRY(atomic_or_uchar) ALTENTRY(atomic_or_uchar_nv) and %o0, 0x3, %o4 ! %o4 = byte offset, left-to-right xor %o4, 0x3, %g1 ! %g1 = byte offset, right-to-left sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left set 0xff, %o3 ! %o3 = mask sll %o3, %g1, %o3 ! %o3 = shifted to bit offset sll %o1, %g1, %o1 ! %o1 = shifted to bit offset and %o1, %o3, %o1 ! %o1 = single byte value andn %o0, 0x3, %o0 ! %o0 = word address ld [%o0], %o2 ! read old value 1: or %o2, %o1, %o5 ! or in the new value cas [%o0], %o2, %o5 cmp %o2, %o5 bne,a,pn %icc, 1b mov %o5, %o2 ! %o2 = old value or %o2, %o1, %o5 and %o5, %o3, %o5 retl srl %o5, %g1, %o0 ! %o0 = new value SET_SIZE(atomic_or_uchar_nv) SET_SIZE(atomic_or_uchar) SET_SIZE(atomic_or_8_nv) SET_SIZE(atomic_or_8) /* * NOTE: If atomic_or_16 and atomic_or_16_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_or_16_nv. */ ENTRY(atomic_or_16) ALTENTRY(atomic_or_16_nv) ALTENTRY(atomic_or_ushort) ALTENTRY(atomic_or_ushort_nv) and %o0, 0x2, %o4 ! %o4 = byte offset, left-to-right xor %o4, 0x2, %g1 ! %g1 = byte offset, right-to-left sll %o4, 3, %o4 ! %o4 = bit offset, left-to-right sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left sethi %hi(0xffff0000), %o3 ! %o3 = mask srl %o3, %o4, %o3 ! %o3 = shifted to bit offset sll %o1, %g1, %o1 ! %o1 = shifted to bit offset and %o1, %o3, %o1 ! %o1 = single short value andn %o0, 0x2, %o0 ! %o0 = word address ! if low-order bit is 1, we will properly get an alignment fault here ld [%o0], %o2 ! read old value 1: or %o2, %o1, %o5 ! or in the new value cas [%o0], %o2, %o5 cmp %o2, %o5 bne,a,pn %icc, 1b mov %o5, %o2 ! %o2 = old value or %o2, %o1, %o5 ! or in the new value and %o5, %o3, %o5 retl srl %o5, %g1, %o0 ! %o0 = new value SET_SIZE(atomic_or_ushort_nv) SET_SIZE(atomic_or_ushort) SET_SIZE(atomic_or_16_nv) SET_SIZE(atomic_or_16) /* * NOTE: If atomic_or_32 and atomic_or_32_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_or_32_nv. */ ENTRY(atomic_or_32) ALTENTRY(atomic_or_32_nv) ALTENTRY(atomic_or_uint) ALTENTRY(atomic_or_uint_nv) ALTENTRY(atomic_or_ulong) ALTENTRY(atomic_or_ulong_nv) ld [%o0], %o2 1: or %o2, %o1, %o3 cas [%o0], %o2, %o3 cmp %o2, %o3 bne,a,pn %icc, 1b mov %o3, %o2 retl or %o2, %o1, %o0 ! return new value SET_SIZE(atomic_or_ulong_nv) SET_SIZE(atomic_or_ulong) SET_SIZE(atomic_or_uint_nv) SET_SIZE(atomic_or_uint) SET_SIZE(atomic_or_32_nv) SET_SIZE(atomic_or_32) /* * NOTE: If atomic_or_64 and atomic_or_64_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_or_64_nv. */ ENTRY(atomic_or_64) ALTENTRY(atomic_or_64_nv) sllx %o1, 32, %o1 ! upper 32 in %o1, lower in %o2 srl %o2, 0, %o2 add %o1, %o2, %o1 ! convert 2 32-bit args into 1 64-bit ldx [%o0], %o2 1: or %o2, %o1, %o3 casx [%o0], %o2, %o3 cmp %o2, %o3 bne,a,pn %xcc, 1b mov %o3, %o2 or %o2, %o1, %o1 ! return lower 32-bits in %o1 retl srlx %o1, 32, %o0 ! return upper 32-bits in %o0 SET_SIZE(atomic_or_64_nv) SET_SIZE(atomic_or_64) /* * NOTE: If atomic_and_8 and atomic_and_8_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_and_8_nv. */ ENTRY(atomic_and_8) ALTENTRY(atomic_and_8_nv) ALTENTRY(atomic_and_uchar) ALTENTRY(atomic_and_uchar_nv) and %o0, 0x3, %o4 ! %o4 = byte offset, left-to-right xor %o4, 0x3, %g1 ! %g1 = byte offset, right-to-left sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left set 0xff, %o3 ! %o3 = mask sll %o3, %g1, %o3 ! %o3 = shifted to bit offset sll %o1, %g1, %o1 ! %o1 = shifted to bit offset orn %o1, %o3, %o1 ! all ones in other bytes andn %o0, 0x3, %o0 ! %o0 = word address ld [%o0], %o2 ! read old value 1: and %o2, %o1, %o5 ! and in the new value cas [%o0], %o2, %o5 cmp %o2, %o5 bne,a,pn %icc, 1b mov %o5, %o2 ! %o2 = old value and %o2, %o1, %o5 and %o5, %o3, %o5 retl srl %o5, %g1, %o0 ! %o0 = new value SET_SIZE(atomic_and_uchar_nv) SET_SIZE(atomic_and_uchar) SET_SIZE(atomic_and_8_nv) SET_SIZE(atomic_and_8) /* * NOTE: If atomic_and_16 and atomic_and_16_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_and_16_nv. */ ENTRY(atomic_and_16) ALTENTRY(atomic_and_16_nv) ALTENTRY(atomic_and_ushort) ALTENTRY(atomic_and_ushort_nv) and %o0, 0x2, %o4 ! %o4 = byte offset, left-to-right xor %o4, 0x2, %g1 ! %g1 = byte offset, right-to-left sll %o4, 3, %o4 ! %o4 = bit offset, left-to-right sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left sethi %hi(0xffff0000), %o3 ! %o3 = mask srl %o3, %o4, %o3 ! %o3 = shifted to bit offset sll %o1, %g1, %o1 ! %o1 = shifted to bit offset orn %o1, %o3, %o1 ! all ones in the other half andn %o0, 0x2, %o0 ! %o0 = word address ! if low-order bit is 1, we will properly get an alignment fault here ld [%o0], %o2 ! read old value 1: and %o2, %o1, %o5 ! and in the new value cas [%o0], %o2, %o5 cmp %o2, %o5 bne,a,pn %icc, 1b mov %o5, %o2 ! %o2 = old value and %o2, %o1, %o5 and %o5, %o3, %o5 retl srl %o5, %g1, %o0 ! %o0 = new value SET_SIZE(atomic_and_ushort_nv) SET_SIZE(atomic_and_ushort) SET_SIZE(atomic_and_16_nv) SET_SIZE(atomic_and_16) /* * NOTE: If atomic_and_32 and atomic_and_32_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_and_32_nv. */ ENTRY(atomic_and_32) ALTENTRY(atomic_and_32_nv) ALTENTRY(atomic_and_uint) ALTENTRY(atomic_and_uint_nv) ALTENTRY(atomic_and_ulong) ALTENTRY(atomic_and_ulong_nv) ld [%o0], %o2 1: and %o2, %o1, %o3 cas [%o0], %o2, %o3 cmp %o2, %o3 bne,a,pn %icc, 1b mov %o3, %o2 retl and %o2, %o1, %o0 ! return new value SET_SIZE(atomic_and_ulong_nv) SET_SIZE(atomic_and_ulong) SET_SIZE(atomic_and_uint_nv) SET_SIZE(atomic_and_uint) SET_SIZE(atomic_and_32_nv) SET_SIZE(atomic_and_32) /* * NOTE: If atomic_and_64 and atomic_and_64_nv are ever * separated, you need to also edit the libc sparc platform * specific mapfile and remove the NODYNSORT attribute * from atomic_and_64_nv. */ ENTRY(atomic_and_64) ALTENTRY(atomic_and_64_nv) sllx %o1, 32, %o1 ! upper 32 in %o1, lower in %o2 srl %o2, 0, %o2 add %o1, %o2, %o1 ! convert 2 32-bit args into 1 64-bit ldx [%o0], %o2 1: and %o2, %o1, %o3 casx [%o0], %o2, %o3 cmp %o2, %o3 bne,a,pn %xcc, 1b mov %o3, %o2 and %o2, %o1, %o1 ! return lower 32-bits in %o1 retl srlx %o1, 32, %o0 ! return upper 32-bits in %o0 SET_SIZE(atomic_and_64_nv) SET_SIZE(atomic_and_64) ENTRY(atomic_cas_8) ALTENTRY(atomic_cas_uchar) and %o0, 0x3, %o4 ! %o4 = byte offset, left-to-right xor %o4, 0x3, %g1 ! %g1 = byte offset, right-to-left sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left set 0xff, %o3 ! %o3 = mask sll %o3, %g1, %o3 ! %o3 = shifted to bit offset sll %o1, %g1, %o1 ! %o1 = shifted to bit offset and %o1, %o3, %o1 ! %o1 = single byte value sll %o2, %g1, %o2 ! %o2 = shifted to bit offset and %o2, %o3, %o2 ! %o2 = single byte value andn %o0, 0x3, %o0 ! %o0 = word address ld [%o0], %o4 ! read old value 1: andn %o4, %o3, %o4 ! clear target bits or %o4, %o2, %o5 ! insert the new value or %o4, %o1, %o4 ! insert the comparison value cas [%o0], %o4, %o5 cmp %o4, %o5 ! did we succeed? be,pt %icc, 2f and %o5, %o3, %o4 ! isolate the old value cmp %o1, %o4 ! should we have succeeded? be,a,pt %icc, 1b ! yes, try again mov %o5, %o4 ! %o4 = old value 2: retl srl %o4, %g1, %o0 ! %o0 = old value SET_SIZE(atomic_cas_uchar) SET_SIZE(atomic_cas_8) ENTRY(atomic_cas_16) ALTENTRY(atomic_cas_ushort) and %o0, 0x2, %o4 ! %o4 = byte offset, left-to-right xor %o4, 0x2, %g1 ! %g1 = byte offset, right-to-left sll %o4, 3, %o4 ! %o4 = bit offset, left-to-right sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left sethi %hi(0xffff0000), %o3 ! %o3 = mask srl %o3, %o4, %o3 ! %o3 = shifted to bit offset sll %o1, %g1, %o1 ! %o1 = shifted to bit offset and %o1, %o3, %o1 ! %o1 = single short value sll %o2, %g1, %o2 ! %o2 = shifted to bit offset and %o2, %o3, %o2 ! %o2 = single short value andn %o0, 0x2, %o0 ! %o0 = word address ! if low-order bit is 1, we will properly get an alignment fault here ld [%o0], %o4 ! read old value 1: andn %o4, %o3, %o4 ! clear target bits or %o4, %o2, %o5 ! insert the new value or %o4, %o1, %o4 ! insert the comparison value cas [%o0], %o4, %o5 cmp %o4, %o5 ! did we succeed? be,pt %icc, 2f and %o5, %o3, %o4 ! isolate the old value cmp %o1, %o4 ! should we have succeeded? be,a,pt %icc, 1b ! yes, try again mov %o5, %o4 ! %o4 = old value 2: retl srl %o4, %g1, %o0 ! %o0 = old value SET_SIZE(atomic_cas_ushort) SET_SIZE(atomic_cas_16) ENTRY(atomic_cas_32) ALTENTRY(atomic_cas_uint) ALTENTRY(atomic_cas_ptr) ALTENTRY(atomic_cas_ulong) cas [%o0], %o1, %o2 retl mov %o2, %o0 SET_SIZE(atomic_cas_ulong) SET_SIZE(atomic_cas_ptr) SET_SIZE(atomic_cas_uint) SET_SIZE(atomic_cas_32) ENTRY(atomic_cas_64) sllx %o1, 32, %o1 ! cmp's upper 32 in %o1, lower in %o2 srl %o2, 0, %o2 ! convert 2 32-bit args into 1 64-bit add %o1, %o2, %o1 sllx %o3, 32, %o2 ! newval upper 32 in %o3, lower in %o4 srl %o4, 0, %o4 ! setup %o2 to have newval add %o2, %o4, %o2 casx [%o0], %o1, %o2 srl %o2, 0, %o1 ! return lower 32-bits in %o1 retl srlx %o2, 32, %o0 ! return upper 32-bits in %o0 SET_SIZE(atomic_cas_64) ENTRY(atomic_swap_8) ALTENTRY(atomic_swap_uchar) and %o0, 0x3, %o4 ! %o4 = byte offset, left-to-right xor %o4, 0x3, %g1 ! %g1 = byte offset, right-to-left sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left set 0xff, %o3 ! %o3 = mask sll %o3, %g1, %o3 ! %o3 = shifted to bit offset sll %o1, %g1, %o1 ! %o1 = shifted to bit offset and %o1, %o3, %o1 ! %o1 = single byte value andn %o0, 0x3, %o0 ! %o0 = word address ld [%o0], %o2 ! read old value 1: andn %o2, %o3, %o5 ! clear target bits or %o5, %o1, %o5 ! insert the new value cas [%o0], %o2, %o5 cmp %o2, %o5 bne,a,pn %icc, 1b mov %o5, %o2 ! %o2 = old value and %o5, %o3, %o5 retl srl %o5, %g1, %o0 ! %o0 = old value SET_SIZE(atomic_swap_uchar) SET_SIZE(atomic_swap_8) ENTRY(atomic_swap_16) ALTENTRY(atomic_swap_ushort) and %o0, 0x2, %o4 ! %o4 = byte offset, left-to-right xor %o4, 0x2, %g1 ! %g1 = byte offset, right-to-left sll %o4, 3, %o4 ! %o4 = bit offset, left-to-right sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left sethi %hi(0xffff0000), %o3 ! %o3 = mask srl %o3, %o4, %o3 ! %o3 = shifted to bit offset sll %o1, %g1, %o1 ! %o1 = shifted to bit offset and %o1, %o3, %o1 ! %o1 = single short value andn %o0, 0x2, %o0 ! %o0 = word address ! if low-order bit is 1, we will properly get an alignment fault here ld [%o0], %o2 ! read old value 1: andn %o2, %o3, %o5 ! clear target bits or %o5, %o1, %o5 ! insert the new value cas [%o0], %o2, %o5 cmp %o2, %o5 bne,a,pn %icc, 1b mov %o5, %o2 ! %o2 = old value and %o5, %o3, %o5 retl srl %o5, %g1, %o0 ! %o0 = old value SET_SIZE(atomic_swap_ushort) SET_SIZE(atomic_swap_16) ENTRY(atomic_swap_32) ALTENTRY(atomic_swap_uint) ALTENTRY(atomic_swap_ptr) ALTENTRY(atomic_swap_ulong) ld [%o0], %o2 1: mov %o1, %o3 cas [%o0], %o2, %o3 cmp %o2, %o3 bne,a,pn %icc, 1b mov %o3, %o2 retl mov %o3, %o0 SET_SIZE(atomic_swap_ulong) SET_SIZE(atomic_swap_ptr) SET_SIZE(atomic_swap_uint) SET_SIZE(atomic_swap_32) ENTRY(atomic_swap_64) sllx %o1, 32, %o1 ! upper 32 in %o1, lower in %o2 srl %o2, 0, %o2 add %o1, %o2, %o1 ! convert 2 32-bit args into 1 64-bit ldx [%o0], %o2 1: mov %o1, %o3 casx [%o0], %o2, %o3 cmp %o2, %o3 bne,a,pn %xcc, 1b mov %o3, %o2 srl %o3, 0, %o1 ! return lower 32-bits in %o1 retl srlx %o3, 32, %o0 ! return upper 32-bits in %o0 SET_SIZE(atomic_swap_64) ENTRY(atomic_set_long_excl) mov 1, %o3 slln %o3, %o1, %o3 ldn [%o0], %o2 1: andcc %o2, %o3, %g0 ! test if the bit is set bnz,a,pn %ncc, 2f ! if so, then fail out mov -1, %o0 or %o2, %o3, %o4 ! set the bit, and try to commit it casn [%o0], %o2, %o4 cmp %o2, %o4 bne,a,pn %ncc, 1b ! failed to commit, try again mov %o4, %o2 mov %g0, %o0 2: retl nop SET_SIZE(atomic_set_long_excl) ENTRY(atomic_clear_long_excl) mov 1, %o3 slln %o3, %o1, %o3 ldn [%o0], %o2 1: andncc %o3, %o2, %g0 ! test if the bit is clear bnz,a,pn %ncc, 2f ! if so, then fail out mov -1, %o0 andn %o2, %o3, %o4 ! clear the bit, and try to commit it casn [%o0], %o2, %o4 cmp %o2, %o4 bne,a,pn %ncc, 1b ! failed to commit, try again mov %o4, %o2 mov %g0, %o0 2: retl nop SET_SIZE(atomic_clear_long_excl) #if !defined(_KERNEL) /* * Spitfires and Blackbirds have a problem with membars in the * delay slot (SF_ERRATA_51). For safety's sake, we assume * that the whole world needs the workaround. */ ENTRY(membar_enter) membar #StoreLoad|#StoreStore retl nop SET_SIZE(membar_enter) ENTRY(membar_exit) membar #LoadStore|#StoreStore retl nop SET_SIZE(membar_exit) ENTRY(membar_producer) membar #StoreStore retl nop SET_SIZE(membar_producer) ENTRY(membar_consumer) membar #LoadLoad retl nop SET_SIZE(membar_consumer) #endif /* !_KERNEL */