/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 1988 AT&T * All Rights Reserved * * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" /* * x86 machine dependent and ELF file class dependent functions. * Contains routines for performing function binding and symbol relocations. */ #include "_synonyms.h" #include #include #include #include #include #include #include #include #include #include #include "_rtld.h" #include "_audit.h" #include "_elf.h" #include "msg.h" extern void elf_rtbndr(Rt_map *, ulong_t, caddr_t); int elf_mach_flags_check(Rej_desc *rej, Ehdr *ehdr) { /* * Check machine type and flags. */ if (ehdr->e_flags != 0) { rej->rej_type = SGS_REJ_BADFLAG; rej->rej_info = (uint_t)ehdr->e_flags; return (0); } return (1); } void ldso_plt_init(Rt_map * lmp) { /* * There is no need to analyze ld.so because we don't map in any of * its dependencies. However we may map these dependencies in later * (as if ld.so had dlopened them), so initialize the plt and the * permission information. */ if (PLTGOT(lmp)) elf_plt_init((PLTGOT(lmp)), (caddr_t)lmp); } static const uchar_t dyn_plt_template[] = { /* 0x00 */ 0x55, /* pushl %ebp */ /* 0x01 */ 0x8b, 0xec, /* movl %esp, %ebp */ /* 0x03 */ 0x68, 0x00, 0x00, 0x00, 0x00, /* pushl trace_fields */ /* 0x08 */ 0xe9, 0xfc, 0xff, 0xff, 0xff, 0xff /* jmp elf_plt_trace */ }; int dyn_plt_ent_size = sizeof (dyn_plt_template); /* * the dynamic plt entry is: * * pushl %ebp * movl %esp, %ebp * pushl tfp * jmp elf_plt_trace * dyn_data: * .align 4 * uintptr_t reflmp * uintptr_t deflmp * uint_t symndx * uint_t sb_flags * Sym symdef */ static caddr_t elf_plt_trace_write(uint_t roffset, Rt_map *rlmp, Rt_map *dlmp, Sym *sym, uint_t symndx, uint_t pltndx, caddr_t to, uint_t sb_flags, int *fail) { extern int elf_plt_trace(); ulong_t got_entry; uchar_t *dyn_plt; uintptr_t *dyndata; /* * We only need to add the glue code if there is an auditing * library that is interested in this binding. */ dyn_plt = (uchar_t *)((uintptr_t)AUDINFO(rlmp)->ai_dynplts + (pltndx * dyn_plt_ent_size)); /* * Have we initialized this dynamic plt entry yet? If we haven't do it * now. Otherwise this function has been called before, but from a * different plt (ie. from another shared object). In that case * we just set the plt to point to the new dyn_plt. */ if (*dyn_plt == 0) { Sym *symp; Word symvalue; Lm_list *lml = LIST(rlmp); (void) memcpy((void *)dyn_plt, dyn_plt_template, sizeof (dyn_plt_template)); dyndata = (uintptr_t *)((uintptr_t)dyn_plt + ROUND(sizeof (dyn_plt_template), M_WORD_ALIGN)); /* * relocate: * pushl dyn_data */ symvalue = (Word)dyndata; if (do_reloc(R_386_32, &dyn_plt[4], &symvalue, MSG_ORIG(MSG_SYM_LADYNDATA), MSG_ORIG(MSG_SPECFIL_DYNPLT), lml) == 0) { *fail = 1; return (0); } /* * jmps are relative, so I need to figure out the relative * address to elf_plt_trace. * * relocating: * jmp elf_plt_trace */ symvalue = (ulong_t)(elf_plt_trace) - (ulong_t)(dyn_plt + 9); if (do_reloc(R_386_PC32, &dyn_plt[9], &symvalue, MSG_ORIG(MSG_SYM_ELFPLTTRACE), MSG_ORIG(MSG_SPECFIL_DYNPLT), lml) == 0) { *fail = 1; return (0); } *dyndata++ = (uintptr_t)rlmp; *dyndata++ = (uintptr_t)dlmp; *dyndata++ = (uint_t)symndx; *dyndata++ = (uint_t)sb_flags; symp = (Sym *)dyndata; *symp = *sym; symp->st_name += (Word)STRTAB(dlmp); symp->st_value = (Addr)to; } got_entry = (ulong_t)roffset; *(ulong_t *)got_entry = (ulong_t)dyn_plt; return ((caddr_t)dyn_plt); } /* * Function binding routine - invoked on the first call to a function through * the procedure linkage table; * passes first through an assembly language interface. * * Takes the offset into the relocation table of the associated * relocation entry and the address of the link map (rt_private_map struct) * for the entry. * * Returns the address of the function referenced after re-writing the PLT * entry to invoke the function directly. * * On error, causes process to terminate with a signal. */ ulong_t elf_bndr(Rt_map *lmp, ulong_t reloff, caddr_t from) { Rt_map *nlmp, *llmp; ulong_t addr, symval, rsymndx; char *name; Rel *rptr; Sym *sym, *nsym; uint_t binfo, sb_flags = 0, dbg_class; Slookup sl; int entry, lmflags; Lm_list *lml; /* * For compatibility with libthread (TI_VERSION 1) we track the entry * value. A zero value indicates we have recursed into ld.so.1 to * further process a locking request. Under this recursion we disable * tsort and cleanup activities. */ entry = enter(); lml = LIST(lmp); if ((lmflags = lml->lm_flags) & LML_FLG_RTLDLM) { dbg_class = dbg_desc->d_class; dbg_desc->d_class = 0; } /* * Perform some basic sanity checks. If we didn't get a load map or * the relocation offset is invalid then its possible someone has walked * over the .got entries or jumped to plt0 out of the blue. */ if (!lmp || ((reloff % sizeof (Rel)) != 0)) { eprintf(lml, ERR_FATAL, MSG_INTL(MSG_REL_PLTREF), conv_reloc_386_type(R_386_JMP_SLOT), EC_NATPTR(lmp), EC_XWORD(reloff), EC_NATPTR(from)); rtldexit(lml, 1); } /* * Use relocation entry to get symbol table entry and symbol name. */ addr = (ulong_t)JMPREL(lmp); rptr = (Rel *)(addr + reloff); rsymndx = ELF_R_SYM(rptr->r_info); sym = (Sym *)((ulong_t)SYMTAB(lmp) + (rsymndx * SYMENT(lmp))); name = (char *)(STRTAB(lmp) + sym->st_name); /* * Determine the last link-map of this list, this'll be the starting * point for any tsort() processing. */ llmp = lml->lm_tail; /* * Find definition for symbol. */ sl.sl_name = name; sl.sl_cmap = lmp; sl.sl_imap = lml->lm_head; sl.sl_hash = 0; sl.sl_rsymndx = rsymndx; sl.sl_flags = LKUP_DEFT; if ((nsym = lookup_sym(&sl, &nlmp, &binfo)) == 0) { eprintf(lml, ERR_FATAL, MSG_INTL(MSG_REL_NOSYM), NAME(lmp), demangle(name)); rtldexit(lml, 1); } symval = nsym->st_value; if (!(FLAGS(nlmp) & FLG_RT_FIXED) && (nsym->st_shndx != SHN_ABS)) symval += ADDR(nlmp); if ((lmp != nlmp) && ((FLAGS1(nlmp) & FL1_RT_NOINIFIN) == 0)) { /* * Record that this new link map is now bound to the caller. */ if (bind_one(lmp, nlmp, BND_REFER) == 0) rtldexit(lml, 1); } if ((lml->lm_tflags | FLAGS1(lmp)) & LML_TFLG_AUD_SYMBIND) { uint_t symndx = (((uintptr_t)nsym - (uintptr_t)SYMTAB(nlmp)) / SYMENT(nlmp)); symval = audit_symbind(lmp, nlmp, nsym, symndx, symval, &sb_flags); } if (!(rtld_flags & RT_FL_NOBIND)) { addr = rptr->r_offset; if (!(FLAGS(lmp) & FLG_RT_FIXED)) addr += ADDR(lmp); if (((lml->lm_tflags | FLAGS1(lmp)) & (LML_TFLG_AUD_PLTENTER | LML_TFLG_AUD_PLTEXIT)) && AUDINFO(lmp)->ai_dynplts) { int fail = 0; uint_t pltndx = reloff / sizeof (Rel); uint_t symndx = (((uintptr_t)nsym - (uintptr_t)SYMTAB(nlmp)) / SYMENT(nlmp)); symval = (ulong_t)elf_plt_trace_write(addr, lmp, nlmp, nsym, symndx, pltndx, (caddr_t)symval, sb_flags, &fail); if (fail) rtldexit(lml, 1); } else { /* * Write standard PLT entry to jump directly * to newly bound function. */ *(ulong_t *)addr = symval; } } /* * Print binding information and rebuild PLT entry. */ DBG_CALL(Dbg_bind_global(lmp, (Addr)from, (Off)(from - ADDR(lmp)), (Xword)(reloff / sizeof (Rel)), PLT_T_FULL, nlmp, (Addr)symval, nsym->st_value, name, binfo)); /* * Complete any processing for newly loaded objects. Note we don't * know exactly where any new objects are loaded (we know the object * that supplied the symbol, but others may have been loaded lazily as * we searched for the symbol), so sorting starts from the last * link-map know on entry to this routine. */ if (entry) load_completion(llmp, lmp); /* * Some operations like dldump() or dlopen()'ing a relocatable object * result in objects being loaded on rtld's link-map, make sure these * objects are initialized also. */ if ((LIST(nlmp)->lm_flags & LML_FLG_RTLDLM) && LIST(nlmp)->lm_init) load_completion(nlmp, 0); /* * If the object we've bound to is in the process of being initialized * by another thread, determine whether we should block. */ is_dep_ready(nlmp, lmp, DBG_WAIT_SYMBOL); /* * Make sure the object to which we've bound has had it's .init fired. * Cleanup before return to user code. */ if (entry) { is_dep_init(nlmp, lmp); leave(lml); } if (lmflags & LML_FLG_RTLDLM) dbg_desc->d_class = dbg_class; return (symval); } /* * When the relocation loop realizes that it's dealing with relative * relocations in a shared object, it breaks into this tighter loop * as an optimization. */ ulong_t elf_reloc_relative(ulong_t relbgn, ulong_t relend, ulong_t relsiz, ulong_t basebgn, ulong_t etext, ulong_t emap) { ulong_t roffset = ((Rel *)relbgn)->r_offset; char rtype; do { roffset += basebgn; /* * If this relocation is against an address not mapped in, * then break out of the relative relocation loop, falling * back on the main relocation loop. */ if (roffset < etext || roffset > emap) break; /* * Perform the actual relocation. */ *((ulong_t *)roffset) += basebgn; relbgn += relsiz; if (relbgn >= relend) break; rtype = ELF_R_TYPE(((Rel *)relbgn)->r_info); roffset = ((Rel *)relbgn)->r_offset; } while (rtype == R_386_RELATIVE); return (relbgn); } /* * This is the tightest loop for RELATIVE relocations for those * objects built with the DT_RELACOUNT .dynamic entry. */ ulong_t elf_reloc_relacount(ulong_t relbgn, ulong_t relacount, ulong_t relsiz, ulong_t basebgn) { ulong_t roffset = ((Rel *) relbgn)->r_offset; for (; relacount; relacount--) { roffset += basebgn; /* * Perform the actual relocation. */ *((ulong_t *)roffset) += basebgn; relbgn += relsiz; roffset = ((Rel *)relbgn)->r_offset; } return (relbgn); } /* * Read and process the relocations for one link object, we assume all * relocation sections for loadable segments are stored contiguously in * the file. */ int elf_reloc(Rt_map *lmp, uint_t plt) { ulong_t relbgn, relend, relsiz, basebgn; ulong_t pltbgn, pltend, _pltbgn, _pltend; ulong_t roffset, rsymndx, psymndx = 0, etext = ETEXT(lmp); ulong_t emap, dsymndx; uchar_t rtype; long value, pvalue; Sym *symref, *psymref, *symdef, *psymdef; char *name, *pname; Rt_map *_lmp, *plmp; int textrel = 0, ret = 1, noplt = 0; int relacount = RELACOUNT(lmp), plthint = 0; Rel *rel; uint_t binfo, pbinfo; Alist *bound = 0; /* * Although only necessary for lazy binding, initialize the first * global offset entry to go to elf_rtbndr(). dbx(1) seems * to find this useful. */ if ((plt == 0) && PLTGOT(lmp)) { if ((ulong_t)PLTGOT(lmp) < etext) { if (elf_set_prot(lmp, PROT_WRITE) == 0) return (0); textrel = 1; } elf_plt_init(PLTGOT(lmp), (caddr_t)lmp); } /* * Initialize the plt start and end addresses. */ if ((pltbgn = (ulong_t)JMPREL(lmp)) != 0) pltend = pltbgn + (ulong_t)(PLTRELSZ(lmp)); relsiz = (ulong_t)(RELENT(lmp)); basebgn = ADDR(lmp); emap = ADDR(lmp) + MSIZE(lmp); if (PLTRELSZ(lmp)) plthint = PLTRELSZ(lmp) / relsiz; /* * If we've been called upon to promote an RTLD_LAZY object to an * RTLD_NOW then we're only interested in scaning the .plt table. * An uninitialized .plt is the case where the associated got entry * points back to the plt itself. Determine the range of the real .plt * entries using the _PROCEDURE_LINKAGE_TABLE_ symbol. */ if (plt) { Slookup sl; relbgn = pltbgn; relend = pltend; if (!relbgn || (relbgn == relend)) return (1); sl.sl_name = MSG_ORIG(MSG_SYM_PLT); sl.sl_cmap = lmp; sl.sl_imap = lmp; sl.sl_hash = elf_hash(MSG_ORIG(MSG_SYM_PLT)); sl.sl_rsymndx = 0; sl.sl_flags = LKUP_DEFT; if ((symdef = elf_find_sym(&sl, &_lmp, &binfo)) == 0) return (1); _pltbgn = symdef->st_value; if (!(FLAGS(lmp) & FLG_RT_FIXED) && (symdef->st_shndx != SHN_ABS)) _pltbgn += basebgn; _pltend = _pltbgn + (((PLTRELSZ(lmp) / relsiz)) * M_PLT_ENTSIZE) + M_PLT_RESERVSZ; } else { /* * The relocation sections appear to the run-time linker as a * single table. Determine the address of the beginning and end * of this table. There are two different interpretations of * the ABI at this point: * * o The REL table and its associated RELSZ indicate the * concatenation of *all* relocation sections (this is the * model our link-editor constructs). * * o The REL table and its associated RELSZ indicate the * concatenation of all *but* the .plt relocations. These * relocations are specified individually by the JMPREL and * PLTRELSZ entries. * * Determine from our knowledege of the relocation range and * .plt range, the range of the total relocation table. Note * that one other ABI assumption seems to be that the .plt * relocations always follow any other relocations, the * following range checking drops that assumption. */ relbgn = (ulong_t)(REL(lmp)); relend = relbgn + (ulong_t)(RELSZ(lmp)); if (pltbgn) { if (!relbgn || (relbgn > pltbgn)) relbgn = pltbgn; if (!relbgn || (relend < pltend)) relend = pltend; } } if (!relbgn || (relbgn == relend)) { DBG_CALL(Dbg_reloc_run(lmp, 0, plt, DBG_REL_NONE)); return (1); } DBG_CALL(Dbg_reloc_run(lmp, M_REL_SHT_TYPE, plt, DBG_REL_START)); /* * If we're processing a dynamic executable in lazy mode there is no * need to scan the .rel.plt table, however if we're processing a shared * object in lazy mode the .got addresses associated to each .plt must * be relocated to reflect the location of the shared object. */ if (pltbgn && ((MODE(lmp) & RTLD_NOW) == 0) && (FLAGS(lmp) & FLG_RT_FIXED)) noplt = 1; /* * Loop through relocations. */ while (relbgn < relend) { uint_t sb_flags = 0; rtype = ELF_R_TYPE(((Rel *)relbgn)->r_info); /* * If this is a RELATIVE relocation in a shared object (the * common case), and if we are not debugging, then jump into a * tighter relocation loop (elf_reloc_relative). Only make the * jump if we've been given a hint on the number of relocations. */ if ((rtype == R_386_RELATIVE) && ((FLAGS(lmp) & FLG_RT_FIXED) == 0) && (DBG_ENABLED == 0)) { /* * It's possible that the relative relocation block * has relocations against the text segment as well * as the data segment. Since our optimized relocation * engine does not check which segment the relocation * is against - just mprotect it now if it's been * marked as containing TEXTREL's. */ if ((textrel == 0) && (FLAGS1(lmp) & FL1_RT_TEXTREL)) { if (elf_set_prot(lmp, PROT_WRITE) == 0) { ret = 0; break; } textrel = 1; } if (relacount) { relbgn = elf_reloc_relacount(relbgn, relacount, relsiz, basebgn); relacount = 0; } else { relbgn = elf_reloc_relative(relbgn, relend, relsiz, basebgn, etext, emap); } if (relbgn >= relend) break; rtype = ELF_R_TYPE(((Rel *)relbgn)->r_info); } roffset = ((Rel *)relbgn)->r_offset; /* * If this is a shared object, add the base address to offset. */ if (!(FLAGS(lmp) & FLG_RT_FIXED)) { /* * If we're processing lazy bindings, we have to step * through the plt entries and add the base address * to the corresponding got entry. */ if (plthint && (plt == 0) && (rtype == R_386_JMP_SLOT) && ((MODE(lmp) & RTLD_NOW) == 0)) { relbgn = elf_reloc_relacount(relbgn, plthint, relsiz, basebgn); plthint = 0; continue; } roffset += basebgn; } rsymndx = ELF_R_SYM(((Rel *)relbgn)->r_info); rel = (Rel *)relbgn; relbgn += relsiz; /* * Optimizations. */ if (rtype == R_386_NONE) continue; if (noplt && ((ulong_t)rel >= pltbgn) && ((ulong_t)rel < pltend)) { relbgn = pltend; continue; } /* * If we're promoting plts determine if this one has already * been written. */ if (plt) { if ((*(ulong_t *)roffset < _pltbgn) || (*(ulong_t *)roffset > _pltend)) continue; } /* * If this relocation is not against part of the image * mapped into memory we skip it. */ if ((roffset < ADDR(lmp)) || (roffset > (ADDR(lmp) + MSIZE(lmp)))) { elf_reloc_bad(lmp, (void *)rel, rtype, roffset, rsymndx); continue; } binfo = 0; /* * If a symbol index is specified then get the symbol table * entry, locate the symbol definition, and determine its * address. */ if (rsymndx) { /* * Get the local symbol table entry. */ symref = (Sym *)((ulong_t)SYMTAB(lmp) + (rsymndx * SYMENT(lmp))); /* * If this is a local symbol, just use the base address. * (we should have no local relocations in the * executable). */ if (ELF_ST_BIND(symref->st_info) == STB_LOCAL) { value = basebgn; name = (char *)0; /* * TLS relocation - value for DTPMOD32 * relocation is the TLS modid. */ if (rtype == R_386_TLS_DTPMOD32) value = TLSMODID(lmp); } else { /* * If the symbol index is equal to the previous * symbol index relocation we processed then * reuse the previous values. (Note that there * have been cases where a relocation exists * against a copy relocation symbol, our ld(1) * should optimize this away, but make sure we * don't use the same symbol information should * this case exist). */ if ((rsymndx == psymndx) && (rtype != R_386_COPY)) { /* LINTED */ if (psymdef == 0) { DBG_CALL(Dbg_bind_weak(lmp, (Addr)roffset, (Addr) (roffset - basebgn), name)); continue; } /* LINTED */ value = pvalue; /* LINTED */ name = pname; /* LINTED */ symdef = psymdef; /* LINTED */ symref = psymref; /* LINTED */ _lmp = plmp; /* LINTED */ binfo = pbinfo; if ((LIST(_lmp)->lm_tflags | FLAGS1(_lmp)) & LML_TFLG_AUD_SYMBIND) { value = audit_symbind(lmp, _lmp, /* LINTED */ symdef, dsymndx, value, &sb_flags); } } else { Slookup sl; uchar_t bind; /* * Lookup the symbol definition. */ name = (char *)(STRTAB(lmp) + symref->st_name); sl.sl_name = name; sl.sl_cmap = lmp; sl.sl_imap = 0; sl.sl_hash = 0; sl.sl_rsymndx = rsymndx; if (rtype == R_386_COPY) sl.sl_flags = LKUP_COPY; else sl.sl_flags = LKUP_DEFT; sl.sl_flags |= LKUP_ALLCNTLIST; if (rtype != R_386_JMP_SLOT) sl.sl_flags |= LKUP_SPEC; bind = ELF_ST_BIND(symref->st_info); if (bind == STB_WEAK) sl.sl_flags |= LKUP_WEAK; symdef = lookup_sym(&sl, &_lmp, &binfo); /* * If the symbol is not found and the * reference was not to a weak symbol, * report an error. Weak references * may be unresolved. * chkmsg: MSG_INTL(MSG_LDD_SYM_NFOUND) */ if (symdef == 0) { Lm_list *lml = LIST(lmp); if (bind != STB_WEAK) { if (lml->lm_flags & LML_FLG_IGNRELERR) { continue; } else if (lml->lm_flags & LML_FLG_TRC_WARN) { (void) printf(MSG_INTL( MSG_LDD_SYM_NFOUND), demangle(name), NAME(lmp)); continue; } else { eprintf(lml, ERR_FATAL, MSG_INTL(MSG_REL_NOSYM), NAME(lmp), demangle(name)); ret = 0; break; } } else { psymndx = rsymndx; psymdef = 0; DBG_CALL(Dbg_bind_weak(lmp, (Addr)roffset, (Addr) (roffset - basebgn), name)); continue; } } /* * If symbol was found in an object * other than the referencing object * then record the binding. */ if ((lmp != _lmp) && ((FLAGS1(_lmp) & FL1_RT_NOINIFIN) == 0)) { if (alist_test(&bound, _lmp, sizeof (Rt_map *), AL_CNT_RELBIND) == 0) { ret = 0; break; } } /* * Calculate the location of definition; * symbol value plus base address of * containing shared object. */ value = symdef->st_value; if (!(FLAGS(_lmp) & FLG_RT_FIXED) && (symdef->st_shndx != SHN_ABS) && (ELF_ST_TYPE(symdef->st_info) != STT_TLS)) value += ADDR(_lmp); /* * Retain this symbol index and the * value in case it can be used for the * subsequent relocations. */ if (rtype != R_386_COPY) { psymndx = rsymndx; pvalue = value; pname = name; psymdef = symdef; psymref = symref; plmp = _lmp; pbinfo = binfo; } if ((LIST(_lmp)->lm_tflags | FLAGS1(_lmp)) & LML_TFLG_AUD_SYMBIND) { dsymndx = (((uintptr_t)symdef - (uintptr_t)SYMTAB(_lmp)) / SYMENT(_lmp)); value = audit_symbind(lmp, _lmp, symdef, dsymndx, value, &sb_flags); } } /* * If relocation is PC-relative, subtract * offset address. */ if (IS_PC_RELATIVE(rtype)) value -= roffset; /* * TLS relocation - value for DTPMOD32 * relocation is the TLS modid. */ if (rtype == R_386_TLS_DTPMOD32) value = TLSMODID(_lmp); else if (rtype == R_386_TLS_TPOFF) value = -(TLSSTATOFF(_lmp) - value); } } else { /* * Special case: * * A DTPMOD32 relocation is a local binding to a TLS * symbol. Fill in the TLSMODID for the current object. */ if (rtype == R_386_TLS_DTPMOD32) value = TLSMODID(lmp); else value = basebgn; name = (char *)0; } /* * If this object has relocations in the text segment, turn * off the write protect. */ if ((roffset < etext) && (textrel == 0)) { if (elf_set_prot(lmp, PROT_WRITE) == 0) { ret = 0; break; } textrel = 1; } /* * Call relocation routine to perform required relocation. */ DBG_CALL(Dbg_reloc_in(LIST(lmp), ELF_DBG_RTLD, M_MACH, M_REL_SHT_TYPE, rel, NULL, name)); switch (rtype) { case R_386_COPY: if (elf_copy_reloc(name, symref, lmp, (void *)roffset, symdef, _lmp, (const void *)value) == 0) ret = 0; break; case R_386_JMP_SLOT: if (((LIST(lmp)->lm_tflags | FLAGS1(lmp)) & (LML_TFLG_AUD_PLTENTER | LML_TFLG_AUD_PLTEXIT)) && AUDINFO(lmp)->ai_dynplts) { int fail = 0; int pltndx = (((ulong_t)rel - (uintptr_t)JMPREL(lmp)) / relsiz); int symndx = (((uintptr_t)symdef - (uintptr_t)SYMTAB(_lmp)) / SYMENT(_lmp)); (void) elf_plt_trace_write(roffset, lmp, _lmp, symdef, symndx, pltndx, (caddr_t)value, sb_flags, &fail); if (fail) ret = 0; } else { /* * Write standard PLT entry to jump directly * to newly bound function. */ DBG_CALL(Dbg_reloc_apply_val(LIST(lmp), ELF_DBG_RTLD, (Xword)roffset, (Xword)value)); *(ulong_t *)roffset = value; } break; default: /* * Write the relocation out. */ if (do_reloc(rtype, (uchar_t *)roffset, (Word *)&value, name, NAME(lmp), LIST(lmp)) == 0) ret = 0; DBG_CALL(Dbg_reloc_apply_val(LIST(lmp), ELF_DBG_RTLD, (Xword)roffset, (Xword)value)); } if ((ret == 0) && ((LIST(lmp)->lm_flags & LML_FLG_TRC_WARN) == 0)) break; if (binfo) { DBG_CALL(Dbg_bind_global(lmp, (Addr)roffset, (Off)(roffset - basebgn), (Xword)(-1), PLT_T_FULL, _lmp, (Addr)value, symdef->st_value, name, binfo)); } } return (relocate_finish(lmp, bound, textrel, ret)); } /* * Initialize the first few got entries so that function calls go to * elf_rtbndr: * * GOT[GOT_XLINKMAP] = the address of the link map * GOT[GOT_XRTLD] = the address of rtbinder */ void elf_plt_init(void *got, caddr_t l) { uint_t *_got; /* LINTED */ Rt_map *lmp = (Rt_map *)l; _got = (uint_t *)got + M_GOT_XLINKMAP; *_got = (uint_t)lmp; _got = (uint_t *)got + M_GOT_XRTLD; *_got = (uint_t)elf_rtbndr; } /* * For SVR4 Intel compatability. USL uses /usr/lib/libc.so.1 as the run-time * linker, so the interpreter's address will differ from /usr/lib/ld.so.1. * Further, USL has special _iob[] and _ctype[] processing that makes up for the * fact that these arrays do not have associated copy relocations. So we try * and make up for that here. Any relocations found will be added to the global * copy relocation list and will be processed in setup(). */ static int _elf_copy_reloc(const char *name, Rt_map *rlmp, Rt_map *dlmp) { Sym *symref, *symdef; caddr_t ref, def; Rt_map *_lmp; Rel rel; Slookup sl; uint_t binfo; /* * Determine if the special symbol exists as a reference in the dynamic * executable, and that an associated definition exists in libc.so.1. */ sl.sl_name = name; sl.sl_cmap = rlmp; sl.sl_imap = rlmp; sl.sl_hash = 0; sl.sl_rsymndx = 0; sl.sl_flags = LKUP_FIRST; if ((symref = lookup_sym(&sl, &_lmp, &binfo)) == 0) return (1); sl.sl_imap = dlmp; sl.sl_flags = LKUP_DEFT; if ((symdef = lookup_sym(&sl, &_lmp, &binfo)) == 0) return (1); if (strcmp(NAME(_lmp), MSG_ORIG(MSG_PTH_LIBC))) return (1); /* * Determine the reference and definition addresses. */ ref = (void *)(symref->st_value); if (!(FLAGS(rlmp) & FLG_RT_FIXED)) ref += ADDR(rlmp); def = (void *)(symdef->st_value); if (!(FLAGS(_lmp) & FLG_RT_FIXED)) def += ADDR(_lmp); /* * Set up a relocation entry for debugging and call the generic copy * relocation function to provide symbol size error checking and to * record the copy relocation that must be performed. */ rel.r_offset = (Addr)ref; rel.r_info = (Word)R_386_COPY; DBG_CALL(Dbg_reloc_in(LIST(rlmp), ELF_DBG_RTLD, M_MACH, M_REL_SHT_TYPE, &rel, NULL, name)); return (elf_copy_reloc((char *)name, symref, rlmp, (void *)ref, symdef, _lmp, (void *)def)); } int elf_copy_gen(Rt_map *lmp) { if (interp && ((ulong_t)interp->i_faddr != r_debug.rtd_rdebug.r_ldbase) && !(strcmp(interp->i_name, MSG_ORIG(MSG_PTH_LIBC)))) { DBG_CALL(Dbg_reloc_run(lmp, M_REL_SHT_TYPE, 0, DBG_REL_START)); if (_elf_copy_reloc(MSG_ORIG(MSG_SYM_CTYPE), lmp, (Rt_map *)NEXT(lmp)) == 0) return (0); if (_elf_copy_reloc(MSG_ORIG(MSG_SYM_IOB), lmp, (Rt_map *)NEXT(lmp)) == 0) return (0); } return (1); } /* * Plt writing interface to allow debugging initialization to be generic. */ Pltbindtype /* ARGSUSED1 */ elf_plt_write(uintptr_t addr, uintptr_t vaddr, void *rptr, uintptr_t symval, Xword pltndx) { Rel *rel = (Rel*)rptr; uintptr_t pltaddr; pltaddr = addr + rel->r_offset; *(ulong_t *)pltaddr = (ulong_t)symval; DBG_CALL(pltcntfull++); return (PLT_T_FULL); } /* * Provide a machine specific interface to the conversion routine. By calling * the machine specific version, rather than the generic version, we insure that * the data tables/strings for all known machine versions aren't dragged into * ld.so.1. */ const char * _conv_reloc_type(uint_t rel) { return (conv_reloc_386_type(rel)); }