#!/bin/sh # # ident "%Z%%M% %I% %E% SMI" # # CDDL HEADER START # # The contents of this file are subject to the terms of the # Common Development and Distribution License (the "License"). # You may not use this file except in compliance with the License. # # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE # or http://www.opensolaris.org/os/licensing. # See the License for the specific language governing permissions # and limitations under the License. # # When distributing Covered Code, include this CDDL HEADER in each # file and include the License file at usr/src/OPENSOLARIS.LICENSE. # If applicable, add the following below this CDDL HEADER, with the # fields enclosed by brackets "[]" replaced with your own identifying # information: Portions Copyright [yyyy] [name of copyright owner] # # CDDL HEADER END # # # idsconfig -- script to setup iDS 5.x/6.x for Native LDAP II. # # Copyright 2008 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # # # display_msg(): Displays message corresponding to the tag passed in. # display_msg() { case "$1" in usage) cat <<EOF $PROG: [ -v ] [ -i input file ] [ -o output file ] i <input file> Get setup info from input file. o <output file> Generate a server configuration output file. v Verbose mode EOF ;; backup_server) cat <<EOF It is strongly recommended that you BACKUP the directory server before running $PROG. Hit Ctrl-C at any time before the final confirmation to exit. EOF ;; setup_complete) cat <<EOF $PROG: Setup of iDS server ${IDS_SERVER} is complete. EOF ;; display_vlv_list) cat <<EOF Note: idsconfig has created entries for VLV indexes. For DS5.x, use the directoryserver(1m) script on ${IDS_SERVER} to stop the server. Then, using directoryserver, follow the directoryserver examples below to create the actual VLV indexes. For DS6.x, use dsadm command delivered with DS6.x on ${IDS_SERVER} to stop the server. Then, using dsadm, follow the dsadm examples below to create the actual VLV indexes. EOF ;; cred_level_menu) cat <<EOF The following are the supported credential levels: 1 anonymous 2 proxy 3 proxy anonymous 4 self 5 self proxy 6 self proxy anonymous EOF ;; auth_method_menu) cat <<EOF The following are the supported Authentication Methods: 1 none 2 simple 3 sasl/DIGEST-MD5 4 tls:simple 5 tls:sasl/DIGEST-MD5 6 sasl/GSSAPI EOF ;; srvauth_method_menu) cat <<EOF The following are the supported Authentication Methods: 1 simple 2 sasl/DIGEST-MD5 3 tls:simple 4 tls:sasl/DIGEST-MD5 5 sasl/GSSAPI EOF ;; prompt_ssd_menu) cat <<EOF A Add a Service Search Descriptor D Delete a SSD M Modify a SSD P Display all SSD's H Help X Clear all SSD's Q Exit menu EOF ;; summary_menu) SUFFIX_INFO= DB_INFO= [ -n "${NEED_CREATE_SUFFIX}" ] && { SUFFIX_INFO=`cat <<EOF Suffix to create : $LDAP_SUFFIX EOF ` [ -n "${NEED_CREATE_BACKEND}" ] && DB_INFO=`cat <<EOF Database to create : $IDS_DATABASE EOF ` } cat <<EOF Summary of Configuration 1 Domain to serve : $LDAP_DOMAIN 2 Base DN to setup : $LDAP_BASEDN$SUFFIX_INFO$DB_INFO 3 Profile name to create : $LDAP_PROFILE_NAME 4 Default Server List : $LDAP_SERVER_LIST 5 Preferred Server List : $LDAP_PREF_SRVLIST 6 Default Search Scope : $LDAP_SEARCH_SCOPE 7 Credential Level : $LDAP_CRED_LEVEL 8 Authentication Method : $LDAP_AUTHMETHOD 9 Enable Follow Referrals : $LDAP_FOLLOWREF 10 iDS Time Limit : $IDS_TIMELIMIT 11 iDS Size Limit : $IDS_SIZELIMIT 12 Enable crypt password storage : $NEED_CRYPT 13 Service Auth Method pam_ldap : $LDAP_SRV_AUTHMETHOD_PAM 14 Service Auth Method keyserv : $LDAP_SRV_AUTHMETHOD_KEY 15 Service Auth Method passwd-cmd: $LDAP_SRV_AUTHMETHOD_CMD 16 Search Time Limit : $LDAP_SEARCH_TIME_LIMIT 17 Profile Time to Live : $LDAP_PROFILE_TTL 18 Bind Limit : $LDAP_BIND_LIMIT 19 Service Search Descriptors Menu EOF ;; sfx_not_suitable) cat <<EOF Sorry, suffix ${LDAP_SUFFIX} is not suitable for Base DN ${LDAP_BASEDN} EOF ;; obj_not_found) cat <<EOF Sorry, ${PROG} can't find an objectclass for "$_ATT" attribute EOF ;; sfx_config_incons) cat <<EOF Sorry, there is no suffix mapping for ${LDAP_SUFFIX}, while ldbm database exists, server configuration needs to be fixed manually, look at cn=mapping tree,cn=config and cn=ldbm database,cn=plugins,cn=config EOF ;; ldbm_db_exist) cat <<EOF Database "${IDS_DATABASE}" already exists, however "${IDS_DATABASE_AVAIL}" name is available EOF ;; unable_find_db_name) cat <<EOF Unable to find any available database name close to "${IDS_DATABASE}" EOF ;; create_ldbm_db_error) cat <<EOF ERROR: unable to create suffix ${LDAP_SUFFIX} due to server error that occurred during creation of ldbm database EOF ;; create_suffix_entry_error) cat <<EOF ERROR: unable to create entry ${LDAP_SUFFIX} of ${LDAP_SUFFIX_OBJ} class EOF ;; ldap_suffix_list) cat <<EOF No valid suffixes (naming contexts) were found for LDAP base DN: ${LDAP_BASEDN} Available suffixes are: ${LDAP_SUFFIX_LIST} EOF ;; sorry) cat <<EOF HELP - No help is available for this topic. EOF ;; create_suffix_help) cat <<EOF HELP - Our Base DN is ${LDAP_BASEDN} and we need to create a Directory Suffix, which can be equal to Base DN itself or be any of Base DN parents. All intermediate entries up to suffix will be created on demand. EOF ;; enter_ldbm_db_help) cat <<EOF HELP - ldbm database is an internal database for storage of our suffix data. Database name must be alphanumeric due to Directory Server restriction. EOF ;; backup_help) cat <<EOF HELP - Since idsconfig modifies the directory server configuration, it is strongly recommended that you backup the server prior to running this utility. This is especially true if the server being configured is a production server. EOF ;; port_help) cat <<EOF HELP - Enter the port number the directory server is configured to use for LDAP. EOF ;; domain_help) cat <<EOF HELP - This is the DNS domain name this server will be serving. You must provide this name even if the server is not going to be populated with hostnames. Any unqualified hostname stored in the directory will be fully qualified using this DNS domain name. EOF ;; basedn_help) cat <<EOF HELP - This parameter defines the default location in the directory tree for the naming services entries. You can override this default by using serviceSearchDescriptors (SSD). You will be given the option to set up an SSD later on in the setup. EOF ;; profile_help) cat <<EOF HELP - Name of the configuration profile with which the clients will be configured. A directory server can store various profiles for multiple groups of clients. The initialization tool, (ldapclient(1M)), assumes "default" unless another is specified. EOF ;; def_srvlist_help) cat <<EOF HELP - Provide a list of directory servers to serve clients using this profile. All these servers should contain consistent data and provide similar functionality. This list is not ordered, and clients might change the order given in this list. Note that this is a space separated list of *IP addresses* (not host names). Providing port numbers is optional. EOF ;; pref_srvlist_help) cat <<EOF HELP - Provide a list of directory servers to serve this client profile. Unlike the default server list, which is not ordered, the preferred servers must be entered IN THE ORDER you wish to have them contacted. If you do specify a preferred server list, clients will always contact them before attempting to contact any of the servers on the default server list. Note that you must enter the preferred server list as a space-separated list of *IP addresses* (not host names). Providing port numbers is optional. EOF ;; srch_scope_help) cat <<EOF HELP - Default search scope to be used for all searches unless they are overwritten using serviceSearchDescriptors. The valid options are "one", which would specify the search will only be performed at the base DN for the given service, or "sub", which would specify the search will be performed through *all* levels below the base DN for the given service. EOF ;; cred_lvl_help) cat <<EOF HELP - This parameter defines what credentials the clients use to authenticate to the directory server. This list might contain multiple credential levels and is ordered. If a proxy level is configured, you will also be prompted to enter a bind DN for the proxy agent along with a password. This proxy agent will be created if it does not exist. EOF ;; auth_help) cat <<EOF HELP - The default authentication method(s) to be used by all services in the client using this profile. This is a ordered list of authentication methods separated by a ';'. The supported methods are provided in a menu. Note that sasl/DIGEST-MD5 binds require passwords to be stored un-encrypted on the server. EOF ;; srvauth_help) cat <<EOF HELP - The authentication methods to be used by a given service. Currently 3 services support this feature: pam_ldap, keyserv, and passwd-cmd. The authentication method specified in this attribute overrides the default authentication method defined in the profile. This feature can be used to select stronger authentication methods for services which require increased security. EOF ;; pam_ldap_help) cat <<EOF HELP - The authentication method(s) to be used by pam_ldap when contacting the directory server. This is a ordered list, and, if provided, will override the default authentication method parameter. EOF ;; keyserv_help) cat <<EOF HELP - The authentication method(s) to be used by newkey(1M) and chkey(1) when contacting the directory server. This is a ordered list and if provided will override the default authentication method parameter. EOF ;; passwd-cmd_help) cat <<EOF HELP - The authentication method(s) to be used by passwd(1) command when contacting the directory server. This is a ordered list and if provided will override the default authentication method parameter. EOF ;; referrals_help) cat <<EOF HELP - This parameter indicates whether the client should follow ldap referrals if it encounters one during naming lookups. EOF ;; tlim_help) cat <<EOF HELP - The server time limit value indicates the maximum amount of time the server would spend on a query from the client before abandoning it. A value of '-1' indicates no limit. EOF ;; slim_help) cat <<EOF HELP - The server sizelimit value indicates the maximum number of entries the server would return in respond to a query from the client. A value of '-1' indicates no limit. EOF ;; crypt_help) cat <<EOF HELP - By default iDS does not store userPassword attribute values using unix "crypt" format. If you need to keep your passwords in the crypt format for NIS/NIS+ and pam_unix compatibility, choose 'yes'. If passwords are stored using any other format than crypt, pam_ldap MUST be used by clients to authenticate users to the system. Note that if you wish to use sasl/DIGEST-MD5 in conjunction with pam_ldap, user passwords must be stored in the clear format. EOF ;; srchtime_help) cat <<EOF HELP - The search time limit the client will enforce for directory lookups. EOF ;; profttl_help) cat <<EOF HELP - The time to live value for profile. The client will refresh its cached version of the configuration profile at this TTL interval. EOF ;; bindlim_help) cat <<EOF HELP - The time limit for the bind operation to the directory. This value controls the responsiveness of the client in case a server becomes unavailable. The smallest timeout value for a given network architecture/conditions would work best. This is very similar to setting TCP timeout, but only for LDAP bind operation. EOF ;; ssd_help) cat <<EOF HELP - Using Service Search Descriptors (SSD), you can override the default configuration for a given service. The SSD can be used to override the default search base DN, the default search scope, and the default search filter to be used for directory lookups. SSD are supported for all services (databases) defined in nsswitch.conf(4). The default base DN is defined in ldap(1). Note: SSD are powerful tools in defining configuration profiles and provide a great deal of flexibility. However, care must be taken in creating them. If you decide to make use of SSDs, consult the documentation first. EOF ;; ssd_menu_help) cat <<EOF HELP - Using this menu SSD can be added, updated, or deleted from the profile. A - This option creates a new SSD by prompting for the service name, base DN, and scope. Service name is any valid service as defined in ldap(1). base is either the distinguished name to the container where this service will use, or a relative DN followed by a ','. D - Delete a previously created SSD. M - Modify a previously created SSD. P - Display a list of all the previously created SSD. X - Delete all of the previously created SSD. Q - Exit the menu and continue with the server configuration. EOF ;; ldap_suffix_list_help) cat <<EOF HELP - No valid suffixes (naming contexts) are available on server ${IDS_SERVER}:${IDS_PORT}. You must set an LDAP Base DN that can be contained in an existing suffix. EOF ;; esac } # # get_ans(): gets an answer from the user. # $1 instruction/comment/description/question # $2 default value # get_ans() { if [ -z "$2" ] then ${ECHO} "$1 \c" else ${ECHO} "$1 [$2] \c" fi read ANS if [ -z "$ANS" ] then ANS=$2 fi } # # get_ans_req(): gets an answer (required) from the user, NULL value not allowed. # $@ instruction/comment/description/question # get_ans_req() { ANS="" # Set ANS to NULL. while [ "$ANS" = "" ] do get_ans "$@" [ "$ANS" = "" ] && ${ECHO} "NULL value not allowed!" done } # # get_number(): Querys and verifies that number entered is numeric. # Function will repeat prompt user for number value. # $1 Message text. # $2 default value. # $3 Help argument. # get_number() { ANS="" # Set ANS to NULL. NUM="" get_ans "$1" "$2" # Verify that value is numeric. while not_numeric $ANS do case "$ANS" in [Hh] | help | Help | \?) display_msg ${3:-sorry} ;; * ) ${ECHO} "Invalid value: \"${ANS}\". \c" ;; esac # Get a new value. get_ans "Enter a numeric value:" "$2" done NUM=$ANS } # # get_negone_num(): Only allows a -1 or positive integer. # Used for values where -1 has special meaning. # # $1 - Prompt message. # $2 - Default value (require). # $3 - Optional help argument. get_negone_num() { while : do get_number "$1" "$2" "$3" if is_negative $ANS then if [ "$ANS" = "-1" ]; then break # -1 is OK, so break. else # Need to re-enter number. ${ECHO} "Invalid number: please enter -1 or positive number." fi else break # Positive number fi done } # # get_passwd(): Reads a password from the user and verify with second. # $@ instruction/comment/description/question # get_passwd() { [ $DEBUG -eq 1 ] && ${ECHO} "In get_passwd()" # Temporary PASSWD variables _PASS1="" _PASS2="" /usr/bin/stty -echo # Turn echo OFF # Endless loop that continues until passwd and re-entered passwd # match. while : do ANS="" # Set ANS to NULL. # Don't allow NULL for first try. while [ "$ANS" = "" ] do get_ans "$@" [ "$ANS" = "" ] && ${ECHO} "" && ${ECHO} "NULL passwd not allowed!" done _PASS1=$ANS # Store first try. # Get second try. ${ECHO} "" get_ans "Re-enter passwd:" _PASS2=$ANS # Test if passwords are identical. if [ "$_PASS1" = "$_PASS2" ]; then break fi # Move cursor down to next line and print ERROR message. ${ECHO} "" ${ECHO} "ERROR: passwords don't match; try again." done /usr/bin/stty echo # Turn echo ON ${ECHO} "" } # # get_passwd_nochk(): Reads a password from the user w/o check. # $@ instruction/comment/description/question # get_passwd_nochk() { [ $DEBUG -eq 1 ] && ${ECHO} "In get_passwd_nochk()" /usr/bin/stty -echo # Turn echo OFF get_ans "$@" /usr/bin/stty echo # Turn echo ON ${ECHO} "" } # # get_menu_choice(): Get a menu choice from user. Continue prompting # till the choice is in required range. # $1 .. Message text. # $2 .. min value # $3 .. max value # $4 .. OPTIONAL: default value # # Return value: # MN_CH will contain the value selected. # get_menu_choice() { # Check for req parameter. if [ $# -lt 3 ]; then ${ECHO} "get_menu_choice(): Did not get required parameters." return 1 fi while : do get_ans "$1" "$4" MN_CH=$ANS is_negative $MN_CH if [ $? -eq 1 ]; then if [ $MN_CH -ge $2 ]; then if [ $MN_CH -le $3 ]; then return fi fi fi ${ECHO} "Invalid choice: $MN_CH" done } # # get_confirm(): Get confirmation from the user. (Y/Yes or N/No) # $1 - Message # $2 - default value. # get_confirm() { _ANSWER= while : do # Display Internal ERROR if $2 not set. if [ -z "$2" ] then ${ECHO} "INTERNAL ERROR: get_confirm requires 2 args, 3rd is optional." exit 2 fi # Display prompt. ${ECHO} "$1 [$2] \c" # Get the ANSWER. read _ANSWER if [ "$_ANSWER" = "" ] && [ -n "$2" ] ; then _ANSWER=$2 fi case "$_ANSWER" in [Yy] | yes | Yes | YES) return 1 ;; [Nn] | no | No | NO) return 0 ;; [Hh] | help | Help | \?) display_msg ${3:-sorry};; * ) ${ECHO} "Please enter y or n." ;; esac done } # # get_confirm_nodef(): Get confirmation from the user. (Y/Yes or N/No) # No default value supported. # get_confirm_nodef() { _ANSWER= while : do ${ECHO} "$@ \c" read _ANSWER case "$_ANSWER" in [Yy] | yes | Yes | YES) return 1 ;; [Nn] | no | No | NO) return 0 ;; * ) ${ECHO} "Please enter y or n." ;; esac done } # # is_numeric(): Tells is a string is numeric. # 0 = Numeric # 1 = NOT Numeric # is_numeric() { # Check for parameter. if [ $# -ne 1 ]; then return 1 fi # Determine if numeric. expr "$1" + 1 > /dev/null 2>&1 if [ $? -ge 2 ]; then return 1 fi # Made it here, it's Numeric. return 0 } # # not_numeric(): Reverses the return values of is_numeric. Useful # for if and while statements that want to test for # non-numeric data. # 0 = NOT Numeric # 1 = Numeric # not_numeric() { is_numeric $1 if [ $? -eq 0 ]; then return 1 else return 0 fi } # # is_negative(): Tells is a Numeric value is less than zero. # 0 = Negative Numeric # 1 = Positive Numeric # 2 = NOT Numeric # is_negative() { # Check for parameter. if [ $# -ne 1 ]; then return 1 fi # Determine if numeric. Can't use expr because -0 is # considered positive?? if is_numeric $1; then case "$1" in -*) return 0 ;; # Negative Numeric *) return 1 ;; # Positive Numeric esac else return 2 fi } # # check_domainname(): check validity of a domain name. Currently we check # that it has at least two components. # $1 the domain name to be checked # check_domainname() { if [ ! -z "$1" ] then t=`expr "$1" : '[^.]\{1,\}[.][^.]\{1,\}'` if [ "$t" = 0 ] then return 1 fi fi return 0 } # # check_baseDN(): check validity of the baseDN name. # $1 the baseDN name to be checked # # NOTE: The check_baseDN function does not catch all invalid DN's. # Its purpose is to reduce the number of invalid DN's to # get past the input routine. The invalid DN's will be # caught by the LDAP server when they are attempted to be # created. # check_baseDN() { ck_DN=$1 ${ECHO} " Checking LDAP Base DN ..." if [ ! -z "$ck_DN" ]; then [ $DEBUG -eq 1 ] && ${ECHO} "Checking baseDN: $ck_DN" # Check for = (assignment operator) ${ECHO} "$ck_DN" | ${GREP} "=" > /dev/null 2>&1 if [ $? -ne 0 ]; then [ $DEBUG -eq 1 ] && ${ECHO} "check_baseDN: No '=' in baseDN." return 1 fi # Check all keys. while : do # Get first key. dkey=`${ECHO} $ck_DN | cut -d'=' -f1` # Check that the key string is valid check_attrName $dkey if [ $? -ne 0 ]; then [ $DEBUG -eq 1 ] && ${ECHO} "check_baseDN: invalid key=${dkey}" return 1 fi [ $DEBUG -eq 1 ] && ${ECHO} "check_baseDN: valid key=${dkey}" # Remove first key from DN ck_DN=`${ECHO} $ck_DN | cut -s -d',' -f2-` # Break loop if nothing left. if [ "$ck_DN" = "" ]; then break fi done fi return 0 } # # domain_2_dc(): Convert a domain name into dc string. # $1 .. Domain name. # domain_2_dc() { _DOM=$1 # Domain parameter. _DOM_2_DC="" # Return value from function. _FIRST=1 # Flag for first time. export _DOM_2_DC # Make visible for others. # Convert "."'s to spaces for "for" loop. domtmp="`${ECHO} ${_DOM} | tr '.' ' '`" for i in $domtmp; do if [ $_FIRST -eq 1 ]; then _DOM_2_DC="dc=${i}" _FIRST=0 else _DOM_2_DC="${_DOM_2_DC},dc=${i}" fi done } # # is_root_user(): Check to see if logged in as root user. # is_root_user() { case `id` in uid=0\(root\)*) return 0 ;; * ) return 1 ;; esac } # # parse_arg(): Parses the command line arguments and sets the # appropriate variables. # parse_arg() { while getopts "dvhi:o:" ARG do case $ARG in d) DEBUG=1;; v) VERB="";; i) INPUT_FILE=$OPTARG;; o) OUTPUT_FILE=$OPTARG;; \?) display_msg usage exit 1;; *) ${ECHO} "**ERROR: Supported option missing handler!" display_msg usage exit 1;; esac done return `expr $OPTIND - 1` } # # init(): initializes variables and options # init() { # General variables. PROG=`basename $0` # Program name PID=$$ # Program ID VERB='> /dev/null 2>&1' # NULL or "> /dev/null" ECHO="/bin/echo" # print message on screen EVAL="eval" # eval or echo EGREP="/usr/bin/egrep" GREP="/usr/bin/grep" DEBUG=0 # Set Debug OFF BACKUP=no_ldap # backup suffix HOST="" # NULL or <hostname> NAWK="/usr/bin/nawk" DOM="" # Set to NULL # If DNS domain (resolv.conf) exists use that, otherwise use domainname. if [ -f /etc/resolv.conf ]; then DOM=`/usr/xpg4/bin/grep -i -E '^domain|^search' /etc/resolv.conf \ | awk '{ print $2 }' | tail -1` fi # If for any reason the DOM did not get set (error'd resolv.conf) set # DOM to the domainname command's output. if [ "$DOM" = "" ]; then DOM=`domainname` # domain from domainname command. fi STEP=1 INTERACTIVE=1 # 0 = on, 1 = off (For input file mode) DEL_OLD_PROFILE=0 # 0 (default), 1 = delete old profile. # idsconfig specific variables. INPUT_FILE="" OUTPUT_FILE="" NEED_PROXY=0 # 0 = No Proxy, 1 = Create Proxy. LDAP_PROXYAGENT="" LDAP_SUFFIX="" LDAP_DOMAIN=$DOM # domainname on Server (default value) GEN_CMD="" # LDAP COMMANDS LDAPSEARCH="/bin/ldapsearch -r" LDAPMODIFY=/bin/ldapmodify LDAPADD=/bin/ldapadd LDAPDELETE=/bin/ldapdelete LDAP_GEN_PROFILE=/usr/sbin/ldap_gen_profile # iDS specific information IDS_SERVER="" IDS_PORT=389 NEED_TIME=0 NEED_SIZE=0 NEED_SRVAUTH_PAM=0 NEED_SRVAUTH_KEY=0 NEED_SRVAUTH_CMD=0 IDS_TIMELIMIT="" IDS_SIZELIMIT="" # LDAP PROFILE related defaults LDAP_ROOTDN="cn=Directory Manager" # Provide common default. LDAP_ROOTPWD="" # NULL passwd as default (i.e. invalid) LDAP_PROFILE_NAME="default" LDAP_BASEDN="" LDAP_SERVER_LIST="" LDAP_AUTHMETHOD="" LDAP_FOLLOWREF="FALSE" NEED_CRYPT="" LDAP_SEARCH_SCOPE="one" LDAP_SRV_AUTHMETHOD_PAM="" LDAP_SRV_AUTHMETHOD_KEY="" LDAP_SRV_AUTHMETHOD_CMD="" LDAP_SEARCH_TIME_LIMIT=30 LDAP_PREF_SRVLIST="" LDAP_PROFILE_TTL=43200 LDAP_CRED_LEVEL="proxy" LDAP_BIND_LIMIT=10 # Prevent new files from being read by group or others. umask 077 # Service Search Descriptors LDAP_SERV_SRCH_DES="" # Set and create TMPDIR. TMPDIR="/tmp/idsconfig.${PID}" if mkdir -m 700 ${TMPDIR} then # Cleanup on exit. trap 'rm -rf ${TMPDIR}; /usr/bin/stty echo; exit' 1 2 3 6 15 else echo "ERROR: unable to create a safe temporary directory." exit 1 fi LDAP_ROOTPWF=${TMPDIR}/rootPWD # Set the SSD file name after setting TMPDIR. SSD_FILE=${TMPDIR}/ssd_list # GSSAPI setup LDAP_KRB_REALM="" LDAP_GSSAPI_PROFILE="" SCHEMA_UPDATED=0 export DEBUG VERB ECHO EVAL EGREP GREP STEP TMPDIR export IDS_SERVER IDS_PORT LDAP_ROOTDN LDAP_ROOTPWD LDAP_SERVER_LIST export LDAP_BASEDN LDAP_ROOTPWF export LDAP_DOMAIN LDAP_SUFFIX LDAP_PROXYAGENT LDAP_PROXYAGENT_CRED export NEED_PROXY export LDAP_PROFILE_NAME LDAP_BASEDN LDAP_SERVER_LIST export LDAP_AUTHMETHOD LDAP_FOLLOWREF LDAP_SEARCH_SCOPE LDAP_SEARCH_TIME_LIMIT export LDAP_PREF_SRVLIST LDAP_PROFILE_TTL LDAP_CRED_LEVEL LDAP_BIND_LIMIT export NEED_SRVAUTH_PAM NEED_SRVAUTH_KEY NEED_SRVAUTH_CMD export LDAP_SRV_AUTHMETHOD_PAM LDAP_SRV_AUTHMETHOD_KEY LDAP_SRV_AUTHMETHOD_CMD export LDAP_SERV_SRCH_DES SSD_FILE export GEN_CMD LDAP_KRB_REALM LDAP_GSSAPI_PROFILE SCHEMA_UPDATED } # # disp_full_debug(): List of all debug variables usually interested in. # Grouped to avoid MASSIVE code duplication. # disp_full_debug() { [ $DEBUG -eq 1 ] && ${ECHO} " IDS_SERVER = $IDS_SERVER" [ $DEBUG -eq 1 ] && ${ECHO} " IDS_PORT = $IDS_PORT" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_ROOTDN = $LDAP_ROOTDN" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_ROOTPWD = $LDAP_ROOTPWD" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_DOMAIN = $LDAP_DOMAIN" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SUFFIX = $LDAP_SUFFIX" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_BASEDN = $LDAP_BASEDN" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_PROFILE_NAME = $LDAP_PROFILE_NAME" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SERVER_LIST = $LDAP_SERVER_LIST" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_PREF_SRVLIST = $LDAP_PREF_SRVLIST" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SEARCH_SCOPE = $LDAP_SEARCH_SCOPE" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_CRED_LEVEL = $LDAP_CRED_LEVEL" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_AUTHMETHOD = $LDAP_AUTHMETHOD" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_FOLLOWREF = $LDAP_FOLLOWREF" [ $DEBUG -eq 1 ] && ${ECHO} " IDS_TIMELIMIT = $IDS_TIMELIMIT" [ $DEBUG -eq 1 ] && ${ECHO} " IDS_SIZELIMIT = $IDS_SIZELIMIT" [ $DEBUG -eq 1 ] && ${ECHO} " NEED_CRYPT = $NEED_CRYPT" [ $DEBUG -eq 1 ] && ${ECHO} " NEED_SRVAUTH_PAM = $NEED_SRVAUTH_PAM" [ $DEBUG -eq 1 ] && ${ECHO} " NEED_SRVAUTH_KEY = $NEED_SRVAUTH_KEY" [ $DEBUG -eq 1 ] && ${ECHO} " NEED_SRVAUTH_CMD = $NEED_SRVAUTH_CMD" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SRV_AUTHMETHOD_PAM = $LDAP_SRV_AUTHMETHOD_PAM" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SRV_AUTHMETHOD_KEY = $LDAP_SRV_AUTHMETHOD_KEY" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SRV_AUTHMETHOD_CMD = $LDAP_SRV_AUTHMETHOD_CMD" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SEARCH_TIME_LIMIT = $LDAP_SEARCH_TIME_LIMIT" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_PROFILE_TTL = $LDAP_PROFILE_TTL" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_BIND_LIMIT = $LDAP_BIND_LIMIT" # Only display proxy stuff if needed. if [ $NEED_PROXY -eq 1 ]; then [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_PROXYAGENT = $LDAP_PROXYAGENT" [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_PROXYAGENT_CRED = $LDAP_PROXYAGENT_CRED" [ $DEBUG -eq 1 ] && ${ECHO} " NEED_PROXY = $NEED_PROXY" fi # Service Search Descriptors are a special case. [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SERV_SRCH_DES = $LDAP_SERV_SRCH_DES" } # # load_config_file(): Loads the config file. # load_config_file() { [ $DEBUG -eq 1 ] && ${ECHO} "In load_config_file()" # Remove SSD lines from input file before sourcing. # The SSD lines must be removed because some forms of the # data could cause SHELL errors. ${GREP} -v "LDAP_SERV_SRCH_DES=" ${INPUT_FILE} > ${TMPDIR}/inputfile.noSSD # Source the input file. . ${TMPDIR}/inputfile.noSSD # If LDAP_SUFFIX is no set, try to utilize LDAP_TREETOP since older # config files use LDAP_TREETOP LDAP_SUFFIX="${LDAP_SUFFIX:-$LDAP_TREETOP}" # Save password to temporary file. save_password # Create the SSD file. create_ssd_file # Display FULL debugging info. disp_full_debug } # # save_password(): Save password to temporary file. # save_password() { cat > ${LDAP_ROOTPWF} <<EOF ${LDAP_ROOTPWD} EOF } ###################################################################### # FUNCTIONS FOR prompt_config_info() START HERE. ###################################################################### # # get_ids_server(): Prompt for iDS server name. # get_ids_server() { while : do # Prompt for server name. get_ans "Enter the JES Directory Server's hostname to setup:" "$IDS_SERVER" IDS_SERVER="$ANS" # Ping server to see if live. If valid break out of loop. ping $IDS_SERVER > /dev/null 2>&1 if [ $? -eq 0 ]; then break fi # Invalid server, enter a new name. ${ECHO} "ERROR: Server '${IDS_SERVER}' is invalid or unreachable." IDS_SERVER="" done # Set SERVER_ARGS and LDAP_ARGS since values might of changed. SERVER_ARGS="-h ${IDS_SERVER} -p ${IDS_PORT}" LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}" export SERVER_ARGS } # # get_ids_port(): Prompt for iDS port number. # get_ids_port() { # Get a valid iDS port number. while : do # Enter port number. get_number "Enter the port number for iDS (h=help):" "$IDS_PORT" "port_help" IDS_PORT=$ANS # Do a simple search to check hostname and port number. # If search returns SUCCESS, break out, host and port must # be valid. ${LDAPSEARCH} -h ${IDS_SERVER} -p ${IDS_PORT} -b "" -s base "objectclass=*" > /dev/null 2>&1 if [ $? -eq 0 ]; then break fi # Invalid host/port pair, Re-enter. ${ECHO} "ERROR: Invalid host or port: ${IDS_SERVER}:${IDS_PORT}, Please re-enter!" get_ids_server done # Set SERVER_ARGS and LDAP_ARGS since values might of changed. SERVER_ARGS="-h ${IDS_SERVER} -p ${IDS_PORT}" LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}" export SERVER_ARGS } # # chk_ids_version(): Read the slapd config file and set variables # chk_ids_version() { [ $DEBUG -eq 1 ] && ${ECHO} "In chk_ids_version()" # check iDS version number. eval "${LDAPSEARCH} ${SERVER_ARGS} -b cn=monitor -s base \"objectclass=*\" version | ${GREP} \"^version=\" | cut -f2 -d'/' | cut -f1 -d' ' > ${TMPDIR}/checkDSver 2>&1" if [ $? -ne 0 ]; then ${ECHO} "ERROR: Can not determine the version number of iDS!" exit 1 fi IDS_VER=`cat ${TMPDIR}/checkDSver` IDS_MAJVER=`${ECHO} ${IDS_VER} | cut -f1 -d.` IDS_MINVER=`${ECHO} ${IDS_VER} | cut -f2 -d.` if [ "${IDS_MAJVER}" != "5" ] && [ "${IDS_MAJVER}" != "6" ]; then ${ECHO} "ERROR: $PROG only works with JES DS version 5.x and 6.x, not ${IDS_VER}." exit 1 fi if [ $DEBUG -eq 1 ]; then ${ECHO} " IDS_MAJVER = $IDS_MAJVER" ${ECHO} " IDS_MINVER = $IDS_MINVER" fi } # # get_dirmgr_dn(): Get the directory manger DN. # get_dirmgr_dn() { get_ans "Enter the directory manager DN:" "$LDAP_ROOTDN" LDAP_ROOTDN=$ANS # Update ENV variables using DN. AUTH_ARGS="-D \"${LDAP_ROOTDN}\" -j ${LDAP_ROOTPWF}" LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}" export AUTH_ARGS LDAP_ARGS } # # get_dirmgr_pw(): Get the Root DN passwd. (Root DN found in slapd.conf) # get_dirmgr_pw() { while : do # Get passwd. get_passwd_nochk "Enter passwd for ${LDAP_ROOTDN} :" LDAP_ROOTPWD=$ANS # Store password in file. save_password # Update ENV variables using DN's PW. AUTH_ARGS="-D \"${LDAP_ROOTDN}\" -j ${LDAP_ROOTPWF}" LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}" export AUTH_ARGS LDAP_ARGS # Verify that ROOTDN and ROOTPWD are valid. eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"\" -s base \"objectclass=*\" > ${TMPDIR}/checkDN 2>&1" if [ $? -ne 0 ]; then eval "${GREP} credential ${TMPDIR}/checkDN ${VERB}" if [ $? -eq 0 ]; then ${ECHO} "ERROR: Root DN passwd is invalid." else ${ECHO} "ERROR: Invalid Root DN <${LDAP_ROOTDN}>." get_dirmgr_dn fi else break # Both are valid. fi done } # # get_domain(): Get the Domain that will be served by the LDAP server. # $1 - Help argument. # get_domain() { # Use LDAP_DOMAIN as default. get_ans "Enter the domainname to be served (h=help):" $LDAP_DOMAIN # Check domainname, and have user re-enter if not valid. check_domainname $ANS while [ $? -ne 0 ] do case "$ANS" in [Hh] | help | Help | \?) display_msg ${1:-sorry} ;; * ) ${ECHO} "Invalid domainname: \"${ANS}\"." ;; esac get_ans "Enter domainname to be served (h=help):" $DOM check_domainname $ANS done # Set the domainname to valid name. LDAP_DOMAIN=$ANS } # # get_basedn(): Query for the Base DN. # get_basedn() { # Set the $_DOM_2_DC and assign to LDAP_BASEDN as default. # Then call get_basedn(). This method remakes the default # each time just in case the domain changed. domain_2_dc $LDAP_DOMAIN LDAP_BASEDN=$_DOM_2_DC # Get Base DN. while : do get_ans_req "Enter LDAP Base DN (h=help):" "${_DOM_2_DC}" check_baseDN "$ANS" while [ $? -ne 0 ] do case "$ANS" in [Hh] | help | Help | \?) display_msg basedn_help ;; * ) ${ECHO} "Invalid base DN: \"${ANS}\"." ;; esac # Re-Enter the BaseDN get_ans_req "Enter LDAP Base DN (h=help):" "${_DOM_2_DC}" check_baseDN "$ANS" done # Set base DN and check its suffix LDAP_BASEDN=${ANS} check_basedn_suffix || { cleanup exit 1 } # suffix may need to be created, in that case get suffix from user [ -n "${NEED_CREATE_SUFFIX}" ] && { get_suffix || continue } # suffix is ok, break out of the base dn inquire loop break done } get_krb_realm() { # To upper cases LDAP_KRB_REALM=`${ECHO} ${LDAP_DOMAIN} | ${NAWK} '{ print toupper($0) }'` get_ans_req "Enter Kerberos Realm:" "$LDAP_KRB_REALM" # To upper cases LDAP_KRB_REALM=`${ECHO} ${ANS} | ${NAWK} '{ print toupper($0) }'` } # $1: DN # $2: ldif file add_entry_by_DN() { ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${1}\" -s base \"objectclass=*\" ${VERB}" if [ $? -eq 0 ]; then ${ECHO} " ${1} already exists" return 0 else ${EVAL} "${LDAPADD} ${LDAP_ARGS} -f ${2} ${VERB}" if [ $? -eq 0 ]; then ${ECHO} " ${1} is added" return 0 else ${ECHO} " ERROR: failed to add ${1}" return 1 fi fi } # # Kerberos princiapl to DN mapping rules # # Add rules for host credentails and user credentials # add_id_mapping_rules() { ${ECHO} " Adding Kerberos principal to DN mapping rules..." _C_DN="cn=GSSAPI,cn=identity mapping,cn=config" ( cat << EOF dn: cn=GSSAPI,cn=identity mapping,cn=config objectClass: top objectClass: nsContainer cn: GSSAPI EOF ) > ${TMPDIR}/GSSAPI_container.ldif add_entry_by_DN "${_C_DN}" "${TMPDIR}/GSSAPI_container.ldif" if [ $? -ne 0 ]; then ${RM} ${TMPDIR}/GSSAPI_container.ldif return fi _H_CN="host_auth_${LDAP_KRB_REALM}" _H_DN="cn=${_H_CN}, ${_C_DN}" ( cat << EOF dn: ${_H_DN} objectClass: top objectClass: nsContainer objectClass: dsIdentityMapping objectClass: dsPatternMatching cn: ${_H_CN} dsMatching-pattern: \${Principal} dsMatching-regexp: host\/(.*).${LDAP_DOMAIN}@${LDAP_KRB_REALM} dsSearchBaseDN: ou=hosts,${LDAP_BASEDN} dsSearchFilter: (&(objectClass=ipHost)(cn=\$1)) dsSearchScope: one EOF ) > ${TMPDIR}/${_H_CN}.ldif add_entry_by_DN "${_H_DN}" "${TMPDIR}/${_H_CN}.ldif" _U_CN="user_auth_${LDAP_KRB_REALM}" _U_DN="cn=${_U_CN}, ${_C_DN}" ( cat << EOF dn: ${_U_DN} objectClass: top objectClass: nsContainer objectClass: dsIdentityMapping objectClass: dsPatternMatching cn: ${_U_CN} dsMatching-pattern: \${Principal} dsMatching-regexp: (.*)@${LDAP_KRB_REALM} dsMappedDN: uid=\$1,ou=People,${LDAP_BASEDN} EOF ) > ${TMPDIR}/${_U_CN}.ldif add_entry_by_DN "${_U_DN}" "${TMPDIR}/${_U_CN}.ldif" } # # Modify ACL to allow root to read all the password and only self can read # its own password when sasl/GSSAPI bind is used # modify_userpassword_acl_for_gssapi() { _P_DN="ou=People,${LDAP_BASEDN}" _H_DN="ou=Hosts,${LDAP_BASEDN}" _P_ACI="self-read-pwd" ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${_P_DN}\" -s base \"objectclass=*\" > /dev/null 2>&1" if [ $? -ne 0 ]; then ${ECHO} " ${_P_DN} does not exist" # Not Found. Create a new entry ( cat << EOF dn: ${_P_DN} ou: People objectClass: top objectClass: organizationalUnit EOF ) > ${TMPDIR}/gssapi_people.ldif add_entry_by_DN "${_P_DN}" "${TMPDIR}/gssapi_people.ldif" else ${ECHO} " ${_P_DN} already exists" fi ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${_P_DN}\" -s base \"objectclass=*\" aci > ${TMPDIR}/chk_gssapi_aci 2>&1" if [ $? -eq 0 ]; then ${EVAL} "${GREP} ${_P_ACI} ${TMPDIR}/chk_gssapi_aci > /dev/null 2>&1" if [ $? -eq 0 ]; then ${ECHO} " userpassword ACL ${_P_ACI} already exists." return else ${ECHO} " userpassword ACL ${_P_ACI} not found. Create a new one." fi else ${ECHO} " Error searching aci for ${_P_DN}" cat ${TMPDIR}/chk_gssapi_aci cleanup exit 1 fi ( cat << EOF dn: ${_P_DN} changetype: modify add: aci aci: (targetattr="userPassword")(version 3.0; acl self-read-pwd; allow (read,search) userdn="ldap:///self" and authmethod="sasl GSSAPI";) - add: aci aci: (targetattr="userPassword")(version 3.0; acl host-read-pwd; allow (read,search) userdn="ldap:///cn=*+ipHostNumber=*,ou=Hosts,${LDAP_BASEDN}" and authmethod="sasl GSSAPI";) EOF ) > ${TMPDIR}/user_gssapi.ldif LDAP_TYPE_OR_VALUE_EXISTS=20 ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/user_gssapi.ldif ${VERB}" case $? in 0) ${ECHO} " ${_P_DN} uaserpassword ACL is updated." ;; 20) ${ECHO} " ${_P_DN} uaserpassword ACL already exists." ;; *) ${ECHO} " ERROR: update of userpassword ACL for ${_P_DN} failed!" cleanup exit 1 ;; esac } # # $1: objectclass or attributetyp # $2: name search_update_schema() { ATTR="${1}es" ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b cn=schema -s base \"objectclass=*\" ${ATTR} | ${GREP} -i \"${2}\" ${VERB}" if [ $? -ne 0 ]; then ${ECHO} "${1} ${2} does not exist." update_schema_attr update_schema_obj SCHEMA_UPDATED=1 else ${ECHO} "${1} ${2} already exists. Schema has been updated" fi } # # $1: 1 - interactive, 0 - no # create_gssapi_profile() { if [ ${1} -eq 1 ]; then echo echo "You can create a sasl/GSSAPI enabled profile with default values now." get_confirm "Do you want to create a sasl/GSSAPI default profile ?" "n" if [ $? -eq 0 ]; then return fi fi # Add profile container if it does not exist eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"ou=profile,${LDAP_BASEDN}\" -s base \"objectclass=*\" > /dev/null 2>&1" if [ $? -ne 0 ]; then ( cat << EOF dn: ou=profile,${LDAP_BASEDN} ou: profile objectClass: top objectClass: organizationalUnit EOF ) > ${TMPDIR}/profile_people.ldif add_entry_by_DN "ou=profile,${LDAP_BASEDN}" "${TMPDIR}/profile_people.ldif" fi search_update_schema "objectclass" "DUAConfigProfile" _P_NAME="gssapi_${LDAP_KRB_REALM}" if [ ${1} -eq 1 ]; then _P_TMP=${LDAP_PROFILE_NAME} LDAP_PROFILE_NAME=${_P_NAME} get_profile_name LDAP_GSSAPI_PROFILE=${LDAP_PROFILE_NAME} LDAP_PROFILE_NAME=${_P_TMP} fi _P_DN="cn=${LDAP_GSSAPI_PROFILE},ou=profile,${LDAP_BASEDN}" if [ ${DEL_OLD_PROFILE} -eq 1 ]; then DEL_OLD_PROFILE=0 ${EVAL} "${LDAPDELETE} ${LDAP_ARGS} ${_P_DN} ${VERB}" fi _SVR=`getent hosts ${IDS_SERVER} | ${NAWK} '{ print $1 }'` if [ ${IDS_PORT} -ne 389 ]; then _SVR="${_SVR}:${IDS_PORT}" fi (cat << EOF dn: ${_P_DN} objectClass: top objectClass: DUAConfigProfile defaultServerList: ${_SVR} defaultSearchBase: ${LDAP_BASEDN} authenticationMethod: sasl/GSSAPI followReferrals: ${LDAP_FOLLOWREF} defaultSearchScope: ${LDAP_SEARCH_SCOPE} searchTimeLimit: ${LDAP_SEARCH_TIME_LIMIT} profileTTL: ${LDAP_PROFILE_TTL} cn: ${LDAP_GSSAPI_PROFILE} credentialLevel: self bindTimeLimit: ${LDAP_BIND_LIMIT} EOF ) > ${TMPDIR}/gssapi_profile.ldif add_entry_by_DN "${_P_DN}" "${TMPDIR}/gssapi_profile.ldif" } # # Set up GSSAPI if necessary # gssapi_setup() { ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"\" -s base \"objectclass=*\" supportedSASLMechanisms | ${GREP} GSSAPI ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " sasl/GSSAPI is not supported by this LDAP server" return fi get_confirm "GSSAPI is supported. Do you want to set up gssapi:(y/n)" "n" if [ $? -eq 0 ]; then ${ECHO} ${ECHO} "GSSAPI is not set up." ${ECHO} "sasl/GSSAPI bind may not workif it's not set up before." else get_krb_realm add_id_mapping_rules modify_userpassword_acl_for_gssapi create_gssapi_profile 1 ${ECHO} ${ECHO} "GSSAPI setup is done." fi cat << EOF You can continue to create a profile and configure the LDAP server. Or you can stop now. EOF get_confirm "Do you want to stop:(y/n)" "n" if [ $? -eq 1 ]; then cleanup exit fi } gssapi_setup_auto() { ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"\" -s base \"objectclass=*\" supportedSASLMechanisms | ${GREP} GSSAPI ${VERB}" if [ $? -ne 0 ]; then ${ECHO} ${ECHO} "sasl/GSSAPI is not supported by this LDAP server" ${ECHO} return fi if [ -z "${LDAP_KRB_REALM}" ]; then ${ECHO} ${ECHO} "LDAP_KRB_REALM is not set. Skip gssapi setup." ${ECHO} "sasl/GSSAPI bind won't work properly." ${ECHO} return fi if [ -z "${LDAP_GSSAPI_PROFILE}" ]; then ${ECHO} ${ECHO} "LDAP_GSSAPI_PROFILE is not set. Default is gssapi_${LDAP_KRB_REALM}" ${ECHO} LDAP_GSSAPI_PROFILE="gssapi_${LDAP_KRB_REALM}" fi add_id_mapping_rules modify_userpassword_acl_for_gssapi create_gssapi_profile 0 } # get_profile_name(): Enter the profile name. # get_profile_name() { # Reset Delete Old Profile since getting new profile name. DEL_OLD_PROFILE=0 # Loop until valid profile name, or replace. while : do # Prompt for profile name. get_ans "Enter the profile name (h=help):" "$LDAP_PROFILE_NAME" # Check for Help. case "$ANS" in [Hh] | help | Help | \?) display_msg profile_help continue ;; * ) ;; esac # Search to see if profile name already exists. eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${ANS},ou=profile,${LDAP_BASEDN}\" -s base \"objectclass=*\" ${VERB}" if [ $? -eq 0 ]; then get_confirm_nodef "Are you sure you want to overwire profile cn=${ANS}?" if [ $? -eq 1 ]; then DEL_OLD_PROFILE=1 return 0 # Replace old profile name. else ${ECHO} "Please re-enter a new profile name." fi else break # Unique profile name. fi done # Set Profile Name. LDAP_PROFILE_NAME=$ANS } # # get_srv_list(): Get the default server list. # get_srv_list() { # If LDAP_SERVER_LIST is NULL, then set, otherwise leave alone. if [ -z "${LDAP_SERVER_LIST}" ]; then LDAP_SERVER_LIST=`getent hosts ${IDS_SERVER} | awk '{print $1}'` if [ ${IDS_PORT} -ne 389 ]; then LDAP_SERVER_LIST="${LDAP_SERVER_LIST}:${IDS_PORT}" fi fi # Prompt for new LDAP_SERVER_LIST. while : do get_ans "Default server list (h=help):" $LDAP_SERVER_LIST # If help continue, otherwise break. case "$ANS" in [Hh] | help | Help | \?) display_msg def_srvlist_help ;; * ) break ;; esac done LDAP_SERVER_LIST=$ANS } # # get_pref_srv(): The preferred server list (Overrides the server list) # get_pref_srv() { while : do get_ans "Preferred server list (h=help):" $LDAP_PREF_SRVLIST # If help continue, otherwise break. case "$ANS" in [Hh] | help | Help | \?) display_msg pref_srvlist_help ;; * ) break ;; esac done LDAP_PREF_SRVLIST=$ANS } # # get_search_scope(): Get the search scope from the user. # get_search_scope() { [ $DEBUG -eq 1 ] && ${ECHO} "In get_search_scope()" _MENU_CHOICE=0 while : do get_ans "Choose desired search scope (one, sub, h=help): " "one" _MENU_CHOICE=$ANS case "$_MENU_CHOICE" in one) LDAP_SEARCH_SCOPE="one" return 1 ;; sub) LDAP_SEARCH_SCOPE="sub" return 2 ;; h) display_msg srch_scope_help ;; *) ${ECHO} "Please enter \"one\", \"sub\", or \"h\"." ;; esac done } # # get_cred_level(): Function to display menu to user and get the # credential level. # get_cred_level() { [ $DEBUG -eq 1 ] && ${ECHO} "In get_cred_level()" _MENU_CHOICE=0 display_msg cred_level_menu while : do get_ans "Choose Credential level [h=help]:" "1" _MENU_CHOICE=$ANS case "$_MENU_CHOICE" in 1) LDAP_CRED_LEVEL="anonymous" return 1 ;; 2) LDAP_CRED_LEVEL="proxy" return 2 ;; 3) LDAP_CRED_LEVEL="proxy anonymous" return 3 ;; 4) LDAP_CRED_LEVEL="self" SELF_GSSAPI=1 return 4 ;; 5) LDAP_CRED_LEVEL="self proxy" SELF_GSSAPI=1 return 5 ;; 6) LDAP_CRED_LEVEL="self proxy anonymous" SELF_GSSAPI=1 return 6 ;; h) display_msg cred_lvl_help ;; *) ${ECHO} "Please enter 1, 2, 3, 4, 5 or 6." ;; esac done } # # srvauth_menu_handler(): Enter the Service Authentication method. # srvauth_menu_handler() { # Display Auth menu display_msg srvauth_method_menu # Get a Valid choice. while : do # Display appropriate prompt and get answer. if [ $_FIRST -eq 1 ]; then get_ans "Choose Service Authentication Method:" "1" else get_ans "Choose Service Authentication Method (0=reset):" fi # Determine choice. _MENU_CHOICE=$ANS case "$_MENU_CHOICE" in 1) _AUTHMETHOD="simple" break ;; 2) _AUTHMETHOD="sasl/DIGEST-MD5" break ;; 3) _AUTHMETHOD="tls:simple" break ;; 4) _AUTHMETHOD="tls:sasl/DIGEST-MD5" break ;; 5) _AUTHMETHOD="sasl/GSSAPI" break ;; 0) _AUTHMETHOD="" _FIRST=1 break ;; *) ${ECHO} "Please enter 1-5 or 0 to reset." ;; esac done } # # auth_menu_handler(): Enter the Authentication method. # auth_menu_handler() { # Display Auth menu display_msg auth_method_menu # Get a Valid choice. while : do # Display appropriate prompt and get answer. if [ $_FIRST -eq 1 ]; then get_ans "Choose Authentication Method (h=help):" "1" else get_ans "Choose Authentication Method (0=reset, h=help):" fi # Determine choice. _MENU_CHOICE=$ANS case "$_MENU_CHOICE" in 1) _AUTHMETHOD="none" break ;; 2) _AUTHMETHOD="simple" break ;; 3) _AUTHMETHOD="sasl/DIGEST-MD5" break ;; 4) _AUTHMETHOD="tls:simple" break ;; 5) _AUTHMETHOD="tls:sasl/DIGEST-MD5" break ;; 6) _AUTHMETHOD="sasl/GSSAPI" break ;; 0) _AUTHMETHOD="" _FIRST=1 break ;; h) display_msg auth_help ;; *) ${ECHO} "Please enter 1-6, 0=reset, or h=help." ;; esac done } # # get_auth(): Enter the Authentication method. # get_auth() { [ $DEBUG -eq 1 ] && ${ECHO} "In get_auth()" _FIRST=1 # Flag for first time. _MENU_CHOICE=0 _AUTHMETHOD="" # Tmp method. while : do # Call Menu handler auth_menu_handler # Add Auth Method to list. if [ $_FIRST -eq 1 ]; then LDAP_AUTHMETHOD="${_AUTHMETHOD}" _FIRST=0 else LDAP_AUTHMETHOD="${LDAP_AUTHMETHOD};${_AUTHMETHOD}" fi # Display current Authentication Method. ${ECHO} "" ${ECHO} "Current authenticationMethod: ${LDAP_AUTHMETHOD}" ${ECHO} "" # Prompt for another Auth Method, or break out. get_confirm_nodef "Do you want to add another Authentication Method?" if [ $? -eq 0 ]; then break; fi done } # # get_followref(): Whether or not to follow referrals. # get_followref() { get_confirm "Do you want the clients to follow referrals (y/n/h)?" "n" "referrals_help" if [ $? -eq 1 ]; then LDAP_FOLLOWREF="TRUE" else LDAP_FOLLOWREF="FALSE" fi } # # get_timelimit(): Set the time limit. -1 is max time. # get_timelimit() { # Get current timeout value from cn=config. eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=config\" -s base \"objectclass=*\" nsslapd-timelimit > ${TMPDIR}/chk_timeout 2>&1" if [ $? -ne 0 ]; then ${ECHO} " ERROR: Could not reach LDAP server to check current timeout!" cleanup exit 1 fi CURR_TIMELIMIT=`${GREP} timelimit ${TMPDIR}/chk_timeout | cut -f2 -d=` get_negone_num "Enter the time limit for iDS (current=${CURR_TIMELIMIT}):" "-1" IDS_TIMELIMIT=$NUM } # # get_sizelimit(): Set the size limit. -1 is max size. # get_sizelimit() { # Get current sizelimit value from cn=config. eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=config\" -s base \"objectclass=*\" nsslapd-sizelimit > ${TMPDIR}/chk_sizelimit 2>&1" if [ $? -ne 0 ]; then ${ECHO} " ERROR: Could not reach LDAP server to check current sizelimit!" cleanup exit 1 fi CURR_SIZELIMIT=`${GREP} sizelimit ${TMPDIR}/chk_sizelimit | cut -f2 -d=` get_negone_num "Enter the size limit for iDS (current=${CURR_SIZELIMIT}):" "-1" IDS_SIZELIMIT=$NUM } # # get_want_crypt(): Ask user if want to store passwords in crypt? # get_want_crypt() { get_confirm "Do you want to store passwords in \"crypt\" format (y/n/h)?" "n" "crypt_help" if [ $? -eq 1 ]; then NEED_CRYPT="TRUE" else NEED_CRYPT="FALSE" fi } # # get_srv_authMethod_pam(): Get the Service Auth Method for pam_ldap from user. # # NOTE: This function is base on get_auth(). # get_srv_authMethod_pam() { [ $DEBUG -eq 1 ] && ${ECHO} "In get_srv_authMethod_pam()" _FIRST=1 # Flag for first time. _MENU_CHOICE=0 _AUTHMETHOD="" # Tmp method. while : do # Call Menu handler srvauth_menu_handler # Add Auth Method to list. if [ $_FIRST -eq 1 ]; then if [ "$_AUTHMETHOD" = "" ]; then LDAP_SRV_AUTHMETHOD_PAM="" else LDAP_SRV_AUTHMETHOD_PAM="pam_ldap:${_AUTHMETHOD}" fi _FIRST=0 else LDAP_SRV_AUTHMETHOD_PAM="${LDAP_SRV_AUTHMETHOD_PAM};${_AUTHMETHOD}" fi # Display current Authentication Method. ${ECHO} "" ${ECHO} "Current authenticationMethod: ${LDAP_SRV_AUTHMETHOD_PAM}" ${ECHO} "" # Prompt for another Auth Method, or break out. get_confirm_nodef "Do you want to add another Authentication Method?" if [ $? -eq 0 ]; then break; fi done # Check in case user reset string and exited loop. if [ "$LDAP_SRV_AUTHMETHOD_PAM" = "" ]; then NEED_SRVAUTH_PAM=0 fi } # # get_srv_authMethod_key(): Get the Service Auth Method for keyserv from user. # # NOTE: This function is base on get_auth(). # get_srv_authMethod_key() { [ $DEBUG -eq 1 ] && ${ECHO} "In get_srv_authMethod_key()" _FIRST=1 # Flag for first time. _MENU_CHOICE=0 _AUTHMETHOD="" # Tmp method. while : do # Call Menu handler srvauth_menu_handler # Add Auth Method to list. if [ $_FIRST -eq 1 ]; then if [ "$_AUTHMETHOD" = "" ]; then LDAP_SRV_AUTHMETHOD_KEY="" else LDAP_SRV_AUTHMETHOD_KEY="keyserv:${_AUTHMETHOD}" fi _FIRST=0 else LDAP_SRV_AUTHMETHOD_KEY="${LDAP_SRV_AUTHMETHOD_KEY};${_AUTHMETHOD}" fi # Display current Authentication Method. ${ECHO} "" ${ECHO} "Current authenticationMethod: ${LDAP_SRV_AUTHMETHOD_KEY}" ${ECHO} "" # Prompt for another Auth Method, or break out. get_confirm_nodef "Do you want to add another Authentication Method?" if [ $? -eq 0 ]; then break; fi done # Check in case user reset string and exited loop. if [ "$LDAP_SRV_AUTHMETHOD_KEY" = "" ]; then NEED_SRVAUTH_KEY=0 fi } # # get_srv_authMethod_cmd(): Get the Service Auth Method for passwd-cmd from user. # # NOTE: This function is base on get_auth(). # get_srv_authMethod_cmd() { [ $DEBUG -eq 1 ] && ${ECHO} "In get_srv_authMethod_cmd()" _FIRST=1 # Flag for first time. _MENU_CHOICE=0 _AUTHMETHOD="" # Tmp method. while : do # Call Menu handler srvauth_menu_handler # Add Auth Method to list. if [ $_FIRST -eq 1 ]; then if [ "$_AUTHMETHOD" = "" ]; then LDAP_SRV_AUTHMETHOD_CMD="" else LDAP_SRV_AUTHMETHOD_CMD="passwd-cmd:${_AUTHMETHOD}" fi _FIRST=0 else LDAP_SRV_AUTHMETHOD_CMD="${LDAP_SRV_AUTHMETHOD_CMD};${_AUTHMETHOD}" fi # Display current Authentication Method. ${ECHO} "" ${ECHO} "Current authenticationMethod: ${LDAP_SRV_AUTHMETHOD_CMD}" ${ECHO} "" # Prompt for another Auth Method, or break out. get_confirm_nodef "Do you want to add another Authentication Method?" if [ $? -eq 0 ]; then break; fi done # Check in case user reset string and exited loop. if [ "$LDAP_SRV_AUTHMETHOD_CMD" = "" ]; then NEED_SRVAUTH_CMD=0 fi } # # get_srch_time(): Amount of time to search. # get_srch_time() { get_negone_num "Client search time limit in seconds (h=help):" "$LDAP_SEARCH_TIME_LIMIT" "srchtime_help" LDAP_SEARCH_TIME_LIMIT=$NUM } # # get_prof_ttl(): The profile time to live (TTL) # get_prof_ttl() { get_negone_num "Profile Time To Live in seconds (h=help):" "$LDAP_PROFILE_TTL" "profttl_help" LDAP_PROFILE_TTL=$NUM } # # get_bind_limit(): Bind time limit # get_bind_limit() { get_negone_num "Bind time limit in seconds (h=help):" "$LDAP_BIND_LIMIT" "bindlim_help" LDAP_BIND_LIMIT=$NUM } ###################################################################### # FUNCTIONS FOR Service Search Descriptor's START HERE. ###################################################################### # # add_ssd(): Get SSD's from user and add to file. # add_ssd() { [ $DEBUG -eq 1 ] && ${ECHO} "In add_ssd()" # Enter the service id. Loop til unique. while : do get_ans "Enter the service id:" _SERV_ID=$ANS # Grep for name existing. ${GREP} -i "^$ANS:" ${SSD_FILE} > /dev/null 2>&1 if [ $? -eq 1 ]; then break fi # Name exists, print message, let user decide. ${ECHO} "ERROR: Service id ${ANS} already exists." done get_ans "Enter the base:" _BASE=$ANS # Get the scope and verify that its one or sub. while : do get_ans "Enter the scope:" _SCOPE=$ANS case `${ECHO} ${_SCOPE} | tr '[A-Z]' '[a-z]'` in one) break ;; sub) break ;; *) ${ECHO} "${_SCOPE} is Not valid - Enter 'one' or 'sub'" ;; esac done # Build SSD to add to file. _SSD="${_SERV_ID}:${_BASE}?${_SCOPE}" # Add the SSD to the file. ${ECHO} "${_SSD}" >> ${SSD_FILE} } # # delete_ssd(): Delete a SSD from the list. # delete_ssd() { [ $DEBUG -eq 1 ] && ${ECHO} "In delete_ssd()" # Get service id name from user for SSD to delete. get_ans_req "Enter service id to delete:" # Make sure service id exists. ${GREP} "$ANS" ${SSD_FILE} > /dev/null 2>&1 if [ $? -eq 1 ]; then ${ECHO} "Invalid service id: $ANS not present in list." return fi # Create temporary back SSD file. cp ${SSD_FILE} ${SSD_FILE}.bak if [ $? -eq 1 ]; then ${ECHO} "ERROR: could not create file: ${SSD_FILE}.bak" exit 1 fi # Use ${GREP} to remove the SSD. Read from temp file # and write to the orig file. ${GREP} -v "$ANS" ${SSD_FILE}.bak > ${SSD_FILE} } # # modify_ssd(): Allow user to modify a SSD. # modify_ssd() { [ $DEBUG -eq 1 ] && ${ECHO} "In modify_ssd()" # Prompt user for service id. get_ans_req "Enter service id to modify:" # Put into temp _LINE. _LINE=`${GREP} "^$ANS:" ${SSD_FILE}` if [ "$_LINE" = "" ]; then ${ECHO} "Invalid service id: $ANS" return fi # Display current filter for user to see. ${ECHO} "" ${ECHO} "Current SSD: $_LINE" ${ECHO} "" # Get the defaults. _CURR_BASE=`${ECHO} $_LINE | cut -d: -f2 | cut -d'?' -f 1` _CURR_SCOPE=`${ECHO} $_LINE | cut -d: -f2 | cut -d'?' -f 2` # Create temporary back SSD file. cp ${SSD_FILE} ${SSD_FILE}.bak if [ $? -eq 1 ]; then ${ECHO} "ERROR: could not create file: ${SSD_FILE}.bak" cleanup exit 1 fi # Removed the old line. ${GREP} -v "^$ANS:" ${SSD_FILE}.bak > ${SSD_FILE} 2>&1 # New Entry _SERV_ID=$ANS get_ans_req "Enter the base:" "$_CURR_BASE" _BASE=$ANS get_ans_req "Enter the scope:" "$_CURR_SCOPE" _SCOPE=$ANS # Build the new SSD. _SSD="${_SERV_ID}:${_BASE}?${_SCOPE}" # Add the SSD to the file. ${ECHO} "${_SSD}" >> ${SSD_FILE} } # # display_ssd(): Display the current SSD list. # display_ssd() { [ $DEBUG -eq 1 ] && ${ECHO} "In display_ssd()" ${ECHO} "" ${ECHO} "Current Service Search Descriptors:" ${ECHO} "==================================" cat ${SSD_FILE} ${ECHO} "" ${ECHO} "Hit return to continue." read __A } # # prompt_ssd(): Get SSD's from user. # prompt_ssd() { [ $DEBUG -eq 1 ] && ${ECHO} "In prompt_ssd()" # See if user wants SSD's? get_confirm "Do you wish to setup Service Search Descriptors (y/n/h)?" "n" "ssd_help" [ "$?" -eq 0 ] && return # Display menu for SSD choices. while : do display_msg prompt_ssd_menu get_ans "Enter menu choice:" "Quit" case "$ANS" in [Aa] | add) add_ssd ;; [Dd] | delete) delete_ssd ;; [Mm] | modify) modify_ssd ;; [Pp] | print | display) display_ssd ;; [Xx] | reset | clear) reset_ssd_file ;; [Hh] | Help | help) display_msg ssd_menu_help ${ECHO} " Press return to continue." read __A ;; [Qq] | Quit | quit) return ;; *) ${ECHO} "Invalid choice: $ANS please re-enter from menu." ;; esac done } # # reset_ssd_file(): Blank out current SSD file. # reset_ssd_file() { [ $DEBUG -eq 1 ] && ${ECHO} "In reset_ssd_file()" rm -f ${SSD_FILE} touch ${SSD_FILE} } # # create_ssd_file(): Create a temporary file for SSD's. # create_ssd_file() { [ $DEBUG -eq 1 ] && ${ECHO} "In create_ssd_file()" # Build a list of SSD's and store in temp file. ${GREP} "LDAP_SERV_SRCH_DES=" ${INPUT_FILE} | \ sed 's/LDAP_SERV_SRCH_DES=//' \ > ${SSD_FILE} } # # ssd_2_config(): Append the SSD file to the output file. # ssd_2_config() { [ $DEBUG -eq 1 ] && ${ECHO} "In ssd_2_config()" # Convert to config file format using sed. sed -e "s/^/LDAP_SERV_SRCH_DES=/" ${SSD_FILE} >> ${OUTPUT_FILE} } # # ssd_2_profile(): Add SSD's to the GEN_CMD string. # ssd_2_profile() { [ $DEBUG -eq 1 ] && ${ECHO} "In ssd_2_profile()" GEN_TMPFILE=${TMPDIR}/ssd_tmpfile touch ${GEN_TMPFILE} # Add and convert each SSD to string. while read SSD_LINE do ${ECHO} " -a \"serviceSearchDescriptor=${SSD_LINE}\"\c" >> ${GEN_TMPFILE} done <${SSD_FILE} # Add SSD's to GEN_CMD. GEN_CMD="${GEN_CMD} `cat ${GEN_TMPFILE}`" } # # prompt_config_info(): This function prompts the user for the config # info that is not specified in the input file. # prompt_config_info() { [ $DEBUG -eq 1 ] && ${ECHO} "In prompt_config_info()" # Prompt for iDS server name. get_ids_server # Prompt for iDS port number. get_ids_port # Check iDS version for compatibility. chk_ids_version # Check if the server supports the VLV. chk_vlv_indexes # Get the Directory manager DN and passwd. get_dirmgr_dn get_dirmgr_pw # # LDAP CLIENT PROFILE SPECIFIC INFORMATION. # (i.e. The fields that show up in the profile.) # get_domain "domain_help" get_basedn gssapi_setup get_profile_name get_srv_list get_pref_srv get_search_scope # If cred is "anonymous", make auth == "none" get_cred_level if [ "$LDAP_CRED_LEVEL" != "anonymous" ]; then get_auth fi get_followref # Query user about timelimt. get_confirm "Do you want to modify the server timelimit value (y/n/h)?" "n" "tlim_help" NEED_TIME=$? [ $NEED_TIME -eq 1 ] && get_timelimit # Query user about sizelimit. get_confirm "Do you want to modify the server sizelimit value (y/n/h)?" "n" "slim_help" NEED_SIZE=$? [ $NEED_SIZE -eq 1 ] && get_sizelimit # Does the user want to store passwords in crypt format? get_want_crypt # Prompt for any Service Authentication Methods? get_confirm "Do you want to setup a Service Authentication Methods (y/n/h)?" "n" "srvauth_help" if [ $? -eq 1 ]; then # Does the user want to set Service Authentication Method for pam_ldap? get_confirm "Do you want to setup a Service Auth. Method for \"pam_ldap\" (y/n/h)?" "n" "pam_ldap_help" NEED_SRVAUTH_PAM=$? [ $NEED_SRVAUTH_PAM -eq 1 ] && get_srv_authMethod_pam # Does the user want to set Service Authentication Method for keyserv? get_confirm "Do you want to setup a Service Auth. Method for \"keyserv\" (y/n/h)?" "n" "keyserv_help" NEED_SRVAUTH_KEY=$? [ $NEED_SRVAUTH_KEY -eq 1 ] && get_srv_authMethod_key # Does the user want to set Service Authentication Method for passwd-cmd? get_confirm "Do you want to setup a Service Auth. Method for \"passwd-cmd\" (y/n/h)?" "n" "passwd-cmd_help" NEED_SRVAUTH_CMD=$? [ $NEED_SRVAUTH_CMD -eq 1 ] && get_srv_authMethod_cmd fi # Get Timeouts get_srch_time get_prof_ttl get_bind_limit # Reset the sdd_file and prompt user for SSD. Will use menus # to build an SSD File. reset_ssd_file prompt_ssd # Display FULL debugging info. disp_full_debug # Extra blank line to separate prompt lines from steps. ${ECHO} " " } ###################################################################### # FUNCTIONS FOR display_summary() START HERE. ###################################################################### # # get_proxyagent(): Get the proxyagent DN. # get_proxyagent() { LDAP_PROXYAGENT="cn=proxyagent,ou=profile,${LDAP_BASEDN}" # default get_ans "Enter DN for proxy agent:" "$LDAP_PROXYAGENT" LDAP_PROXYAGENT=$ANS } # # get_proxy_pw(): Get the proxyagent passwd. # get_proxy_pw() { get_passwd "Enter passwd for proxyagent:" LDAP_PROXYAGENT_CRED=$ANS } # # display_summary(): Display a summary of values entered and let the # user modify values at will. # display_summary() { [ $DEBUG -eq 1 ] && ${ECHO} "In display_summary()" # Create lookup table for function names. First entry is dummy for # shift. TBL1="dummy" TBL2="get_domain get_basedn get_profile_name" TBL3="get_srv_list get_pref_srv get_search_scope get_cred_level" TBL4="get_auth get_followref" TBL5="get_timelimit get_sizelimit get_want_crypt" TBL6="get_srv_authMethod_pam get_srv_authMethod_key get_srv_authMethod_cmd" TBL7="get_srch_time get_prof_ttl get_bind_limit" TBL8="prompt_ssd" FUNC_TBL="$TBL1 $TBL2 $TBL3 $TBL4 $TBL5 $TBL6 $TBL7 $TBL8" # Since menu prompt string is long, set here. _MENU_PROMPT="Enter config value to change: (1-19 0=commit changes)" # Infinite loop. Test for 0, and break in loop. while : do # Display menu and get value in range. display_msg summary_menu get_menu_choice "${_MENU_PROMPT}" "0" "19" "0" _CH=$MN_CH # Make sure where not exiting. if [ $_CH -eq 0 ]; then break # Break out of loop if 0 selected. fi # Call appropriate function from function table. set $FUNC_TBL shift $_CH $1 # Call the appropriate function. done # If cred level is still see if user wants a change? if ${ECHO} "$LDAP_CRED_LEVEL" | ${GREP} "proxy" > /dev/null 2>&1 then if [ "$LDAP_AUTHMETHOD" != "none" ]; then NEED_PROXY=1 # I assume integer test is faster? get_proxyagent get_proxy_pw else ${ECHO} "WARNING: Since Authentication method is 'none'." ${ECHO} " Credential level will be set to 'anonymous'." LDAP_CRED_LEVEL="anonymous" fi fi # Display FULL debugging info. disp_full_debug # Final confirmation message. (ARE YOU SURE!) ${ECHO} " " get_confirm_nodef "WARNING: About to start committing changes. (y=continue, n=EXIT)" if [ $? -eq 0 ]; then ${ECHO} "Terminating setup without making changes at users request." cleanup exit 1 fi # Print newline ${ECHO} " " } # # create_config_file(): Write config data to config file specified. # create_config_file() { [ $DEBUG -eq 1 ] && ${ECHO} "In create_config_file()" # If output file exists, delete it. [ -f $OUTPUT_FILE ] && rm $OUTPUT_FILE # Create output file. cat > $OUTPUT_FILE <<EOF #!/bin/sh # $OUTPUT_FILE - This file contains configuration information for # Native LDAP. Use the idsconfig tool to load it. # # WARNING: This file was generated by idsconfig, and is intended to # be loaded by idsconfig as is. DO NOT EDIT THIS FILE! # IDS_SERVER="$IDS_SERVER" IDS_PORT=$IDS_PORT IDS_TIMELIMIT=$IDS_TIMELIMIT IDS_SIZELIMIT=$IDS_SIZELIMIT LDAP_ROOTDN="$LDAP_ROOTDN" LDAP_ROOTPWD=$LDAP_ROOTPWD LDAP_DOMAIN="$LDAP_DOMAIN" LDAP_SUFFIX="$LDAP_SUFFIX" LDAP_KRB_REALM="$LDAP_KRB_REALM" LDAP_GSSAPI_PROFILE="$LDAP_GSSAPI_PROFILE" # Internal program variables that need to be set. NEED_PROXY=$NEED_PROXY NEED_TIME=$NEED_TIME NEED_SIZE=$NEED_SIZE NEED_CRYPT=$NEED_CRYPT # LDAP PROFILE related defaults LDAP_PROFILE_NAME="$LDAP_PROFILE_NAME" DEL_OLD_PROFILE=1 LDAP_BASEDN="$LDAP_BASEDN" LDAP_SERVER_LIST="$LDAP_SERVER_LIST" LDAP_AUTHMETHOD="$LDAP_AUTHMETHOD" LDAP_FOLLOWREF=$LDAP_FOLLOWREF LDAP_SEARCH_SCOPE="$LDAP_SEARCH_SCOPE" NEED_SRVAUTH_PAM=$NEED_SRVAUTH_PAM NEED_SRVAUTH_KEY=$NEED_SRVAUTH_KEY NEED_SRVAUTH_CMD=$NEED_SRVAUTH_CMD LDAP_SRV_AUTHMETHOD_PAM="$LDAP_SRV_AUTHMETHOD_PAM" LDAP_SRV_AUTHMETHOD_KEY="$LDAP_SRV_AUTHMETHOD_KEY" LDAP_SRV_AUTHMETHOD_CMD="$LDAP_SRV_AUTHMETHOD_CMD" LDAP_SEARCH_TIME_LIMIT=$LDAP_SEARCH_TIME_LIMIT LDAP_PREF_SRVLIST="$LDAP_PREF_SRVLIST" LDAP_PROFILE_TTL=$LDAP_PROFILE_TTL LDAP_CRED_LEVEL="$LDAP_CRED_LEVEL" LDAP_BIND_LIMIT=$LDAP_BIND_LIMIT # Proxy Agent LDAP_PROXYAGENT="$LDAP_PROXYAGENT" LDAP_PROXYAGENT_CRED=$LDAP_PROXYAGENT_CRED # Export all the variables (just in case) export IDS_HOME IDS_PORT LDAP_ROOTDN LDAP_ROOTPWD LDAP_SERVER_LIST LDAP_BASEDN export LDAP_DOMAIN LDAP_SUFFIX LDAP_PROXYAGENT LDAP_PROXYAGENT_CRED export NEED_PROXY export LDAP_PROFILE_NAME LDAP_BASEDN LDAP_SERVER_LIST export LDAP_AUTHMETHOD LDAP_FOLLOWREF LDAP_SEARCH_SCOPE LDAP_SEARCH_TIME_LIMIT export LDAP_PREF_SRVLIST LDAP_PROFILE_TTL LDAP_CRED_LEVEL LDAP_BIND_LIMIT export NEED_SRVAUTH_PAM NEED_SRVAUTH_KEY NEED_SRVAUTH_CMD export LDAP_SRV_AUTHMETHOD_PAM LDAP_SRV_AUTHMETHOD_KEY LDAP_SRV_AUTHMETHOD_CMD export LDAP_SERV_SRCH_DES SSD_FILE LDAP_KRB_REALM LDAP_GSSAPI_PROFILE # Service Search Descriptors start here if present: EOF # Add service search descriptors. ssd_2_config "${OUTPUT_FILE}" # Add LDAP suffix preferences print_suffix_config >> "${OUTPUT_FILE}" # Add the end of FILE tag. ${ECHO} "" >> ${OUTPUT_FILE} ${ECHO} "# End of $OUTPUT_FILE" >> ${OUTPUT_FILE} } # # chk_vlv_indexes(): Do ldapsearch to see if server supports VLV. # chk_vlv_indexes() { # Do ldapsearch to see if server supports VLV. ${LDAPSEARCH} ${SERVER_ARGS} -b "" -s base "objectclass=*" > ${TMPDIR}/checkVLV 2>&1 eval "${GREP} 2.16.840.1.113730.3.4.9 ${TMPDIR}/checkVLV ${VERB}" if [ $? -ne 0 ]; then ${ECHO} "ERROR: VLV is not supported on LDAP server!" cleanup exit 1 fi [ $DEBUG -eq 1 ] && ${ECHO} " VLV controls found on LDAP server." } # # get_backend(): this function gets the relevant backend # (database) for LDAP_BASED. # Description: set IDS_DATABASE; exit on failure. # Prerequisite: LDAP_BASEDN and LDAP_SUFFIX are # valid. # # backend is retrieved from suffixes and subsuffixes # defined under "cn=mapping tree,cn=config". The # nsslapd-state attribute of these suffixes entries # is filled with either Backend, Disabled or referrals # related values. We only want those that have a true # backend database to select the relevant backend. # get_backend() { [ $DEBUG -eq 1 ] && ${ECHO} "In get_backend()" cur_suffix=${LDAP_BASEDN} prev_suffix= IDS_DATABASE= while [ "${cur_suffix}" != "${prev_suffix}" ] do [ $DEBUG -eq 1 ] && ${ECHO} "testing LDAP suffix: ${cur_suffix}" eval "${LDAPSEARCH} ${LDAP_ARGS} " \ "-b \"cn=\\\"${cur_suffix}\\\",cn=mapping tree,cn=config\" " \ "-s base nsslapd-state=Backend nsslapd-backend 2>&1 " \ "| ${GREP} 'nsslapd-backend=' " \ "> ${TMPDIR}/ids_database_name 2>&1" NUM_DBS=`wc -l ${TMPDIR}/ids_database_name | awk '{print $1}'` case ${NUM_DBS} in 0) # not a suffix, or suffix not activated; try next prev_suffix=${cur_suffix} cur_suffix=`${ECHO} ${cur_suffix} | cut -f2- -d','` ;; 1) # suffix found; get database name IDS_DATABASE=`cat ${TMPDIR}/ids_database_name | cut -d= -f2` ;; *) # can not handle more than one database per suffix ${ECHO} "ERROR: More than one database is configured " ${ECHO} " for $LDAP_SUFFIX!" ${ECHO} " $PROG can not configure suffixes where " ${ECHO} " more than one database is used for one suffix." cleanup exit 1 ;; esac if [ -n "${IDS_DATABASE}" ]; then break fi done if [ -z "${IDS_DATABASE}" ]; then # should not happen, since LDAP_BASEDN is supposed to be valid ${ECHO} "Could not find a valid backend for ${LDAP_BASEDN}." ${ECHO} "Exiting." cleanup exit 1 fi [ $DEBUG -eq 1 ] && ${ECHO} "IDS_DATABASE: ${IDS_DATABASE}" } # # validate_suffix(): This function validates ${LDAP_SUFFIX} # THIS FUNCTION IS FOR THE LOAD CONFIG FILE OPTION. # validate_suffix() { [ $DEBUG -eq 1 ] && ${ECHO} "In validate_suffix()" # Check LDAP_SUFFIX is not null if [ -z "${LDAP_SUFFIX}" ]; then ${ECHO} "Invalid suffix (null suffix)" cleanup exit 1 fi # Check LDAP_SUFFIX and LDAP_BASEDN are consistent # Convert to lower case for basename. format_string "${LDAP_BASEDN}" LOWER_BASEDN="${FMT_STR}" format_string "${LDAP_SUFFIX}" LOWER_SUFFIX="${FMT_STR}" [ $DEBUG -eq 1 ] && ${ECHO} "LOWER_BASEDN: ${LOWER_BASEDN}" [ $DEBUG -eq 1 ] && ${ECHO} "LOWER_SUFFIX: ${LOWER_SUFFIX}" if [ "${LOWER_BASEDN}" != "${LOWER_SUFFIX}" ]; then sub_basedn=`basename "${LOWER_BASEDN}" "${LOWER_SUFFIX}"` if [ "$sub_basedn" = "${LOWER_BASEDN}" ]; then ${ECHO} "Invalid suffix ${LOWER_SUFFIX}" ${ECHO} "for Base DN ${LOWER_BASEDN}" cleanup exit 1 fi fi # Check LDAP_SUFFIX does exist ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_SUFFIX}\" -s base \"objectclass=*\" > ${TMPDIR}/checkSuffix 2>&1" && return 0 # Well, suffix does not exist, try to prepare create it ... NEED_CREATE_SUFFIX=1 prep_create_sfx_entry || { cleanup exit 1 } [ -n "${NEED_CREATE_BACKEND}" ] && { # try to use id attr value of the suffix as a database name IDS_DATABASE=${_VAL} prep_create_sfx_backend case $? in 1) # cann't use the name we want, so we can either exit or use # some another available name - doing the last ... IDS_DATABASE=${IDS_DATABASE_AVAIL} ;; 2) # unable to determine database name cleanup exit 1 ;; esac } [ $DEBUG -eq 1 ] && ${ECHO} "Suffix $LDAP_SUFFIX, Database $IDS_DATABASE" } # # validate_info(): This function validates the basic info collected # So that some problems are caught right away. # THIS FUNCTION IS FOR THE LOAD CONFIG FILE OPTION. # validate_info() { [ $DEBUG -eq 1 ] && ${ECHO} "In validate_info()" # Set SERVER_ARGS, AUTH_ARGS, and LDAP_ARGS for the config file. SERVER_ARGS="-h ${IDS_SERVER} -p ${IDS_PORT}" AUTH_ARGS="-D \"${LDAP_ROOTDN}\" -j ${LDAP_ROOTPWF}" LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}" export SERVER_ARGS # Check the Root DN and Root DN passwd. # Use eval instead of $EVAL because not part of setup. (validate) eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"\" -s base \"objectclass=*\" > ${TMPDIR}/checkDN 2>&1" if [ $? -ne 0 ]; then eval "${GREP} credential ${TMPDIR}/checkDN ${VERB}" if [ $? -eq 0 ]; then ${ECHO} "ERROR: Root DN passwd is invalid." else ${ECHO} "ERROR2: Invalid Root DN <${LDAP_ROOTDN}>." fi cleanup exit 1 fi [ $DEBUG -eq 1 ] && ${ECHO} " RootDN ... OK" [ $DEBUG -eq 1 ] && ${ECHO} " RootDN passwd ... OK" # Check if the server supports the VLV. chk_vlv_indexes [ $DEBUG -eq 1 ] && ${ECHO} " VLV indexes ... OK" # Check LDAP suffix validate_suffix [ $DEBUG -eq 1 ] && ${ECHO} " LDAP suffix ... OK" } # # format_string(): take a string as argument and set FMT_STR # to be the same string formatted as follow: # - only lower case characters # - no unnecessary spaces around , and = # format_string() { FMT_STR=`${ECHO} "$1" | tr '[A-Z]' '[a-z]' | sed -e 's/[ ]*,[ ]*/,/g' -e 's/[ ]*=[ ]*/=/g'` } # # prepare for the suffix entry creation # # input : LDAP_BASEDN, LDAP_SUFFIX - base dn and suffix; # in/out : LDAP_SUFFIX_OBJ, LDAP_SUFFIX_ACI - initially may come from config. # output : NEED_CREATE_BACKEND - backend for this suffix needs to be created; # _RDN, _ATT, _VAL - suffix's RDN, id attribute name and its value. # return : 0 - success, otherwise error. # prep_create_sfx_entry() { [ $DEBUG -eq 1 ] && ${ECHO} "In prep_create_sfx_entry()" # check whether suffix corresponds to base dn format_string "${LDAP_BASEDN}" ${ECHO} ",${FMT_STR}" | ${GREP} ",${LDAP_SUFFIX}$" >/dev/null 2>&1 || { display_msg sfx_not_suitable return 1 } # parse LDAP_SUFFIX _RDN=`${ECHO} "${LDAP_SUFFIX}" | cut -d, -f1` _ATT=`${ECHO} "${_RDN}" | cut -d= -f1` _VAL=`${ECHO} "${_RDN}" | cut -d= -f2-` # find out an objectclass for suffix entry if it is not defined yet [ -z "${LDAP_SUFFIX_OBJ}" ] && { get_objectclass ${_ATT} [ -z "${_ATTR_NAME}" ] && { display_msg obj_not_found return 1 } LDAP_SUFFIX_OBJ=${_ATTR_NAME} } [ $DEBUG -eq 1 ] && ${ECHO} "Suffix entry object is ${LDAP_SUFFIX_OBJ}" # find out an aci for suffix entry if it is not defined yet [ -z "${LDAP_SUFFIX_ACI}" ] && { # set Directory Server default aci LDAP_SUFFIX_ACI=`cat <<EOF aci: (targetattr != "userPassword || passwordHistory || passwordExpirationTime || passwordExpWarned || passwordRetryCount || retryCountResetTime || accountUnlockTime || passwordAllowChangeTime") ( version 3.0; acl "Anonymous access"; allow (read, search, compare) userdn = "ldap:///anyone"; ) aci: (targetattr != "nsroledn || aci || nsLookThroughLimit || nsSizeLimit || nsTimeLimit || nsIdleTimeout || passwordPolicySubentry || passwordExpirationTime || passwordExpWarned || passwordRetryCount || retryCountResetTime || accountUnlockTime || passwordHistory || passwordAllowChangeTime") ( version 3.0; acl "Allow self entry modification except for some attributes"; allow (write) userdn = "ldap:///self"; ) aci: (targetattr = "*") ( version 3.0; acl "Configuration Administrator"; allow (all) userdn = "ldap:///uid=admin,ou=Administrators, ou=TopologyManagement,o=NetscapeRoot"; ) aci: (targetattr ="*") ( version 3.0; acl "Configuration Administrators Group"; allow (all) groupdn = "ldap:///cn=Configuration Administrators, ou=Groups,ou=TopologyManagement,o=NetscapeRoot"; ) EOF ` } [ $DEBUG -eq 1 ] && cat <<EOF DEBUG: ACI for ${LDAP_SUFFIX} is ${LDAP_SUFFIX_ACI} EOF NEED_CREATE_BACKEND= # check the suffix mapping tree ... # if mapping exists, suffix should work, otherwise DS inconsistent # NOTE: -b 'cn=mapping tree,cn=config' -s one 'cn=\"$1\"' won't work # in case of 'cn' value in LDAP is not quoted by '"', # -b 'cn=\"$1\",cn=mapping tree,cn=config' works in all cases ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} \ -b 'cn=\"${LDAP_SUFFIX}\",cn=mapping tree,cn=config' \ -s base 'objectclass=*' dn ${VERB}" && { [ $DEBUG -eq 1 ] && ${ECHO} "Suffix mapping already exists" # get_backend() either gets IDS_DATABASE or exits get_backend return 0 } # no suffix mapping, just in case check ldbm backends consistency - # there are must be NO any databases pointing to LDAP_SUFFIX [ -n "`${EVAL} \"${LDAPSEARCH} ${LDAP_ARGS} \ -b 'cn=ldbm database,cn=plugins,cn=config' \ -s one 'nsslapd-suffix=${LDAP_SUFFIX}' dn\" 2>/dev/null`" ] && { display_msg sfx_config_incons return 1 } # ok, no suffix mapping, no ldbm database [ $DEBUG -eq 1 ] && ${ECHO} "DEBUG: backend needs to be created ..." NEED_CREATE_BACKEND=1 return 0 } # # prepare for the suffix backend creation # # input : IDS_DATABASE - requested ldbm db name (must be not null) # in/out : IDS_DATABASE_AVAIL - available ldbm db name # return : 0 - ldbm db name ok # 1 - IDS_DATABASE exists, # so IDS_DATABASE_AVAIL contains available name # 2 - unable to find any available name # prep_create_sfx_backend() { [ $DEBUG -eq 1 ] && ${ECHO} "In prep_create_sfx_backend()" # check if requested name available [ "${IDS_DATABASE}" = "${IDS_DATABASE_AVAIL}" ] && return 0 # get the list of database names start with a requested name _LDBM_DBS=`${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} \ -b 'cn=ldbm database,cn=plugins,cn=config' \ -s one 'cn=${IDS_DATABASE}*' cn"` 2>/dev/null # find available db name based on a requested name _i=""; _i_MAX=10 while [ ${_i:-0} -lt ${_i_MAX} ] do _name="${IDS_DATABASE}${_i}" ${ECHO} "${_LDBM_DBS}" | ${GREP} -i "^cn=${_name}$" >/dev/null 2>&1 || { IDS_DATABASE_AVAIL="${_name}" break } _i=`expr ${_i:-0} + 1` done [ "${IDS_DATABASE}" = "${IDS_DATABASE_AVAIL}" ] && return 0 [ -n "${IDS_DATABASE_AVAIL}" ] && { display_msg ldbm_db_exist return 1 } display_msg unable_find_db_name return 2 } # # add suffix if needed, # suffix entry and backend MUST be prepared by # prep_create_sfx_entry and prep_create_sfx_backend correspondingly # # input : NEED_CREATE_SUFFIX, LDAP_SUFFIX, LDAP_SUFFIX_OBJ, _ATT, _VAL # LDAP_SUFFIX_ACI, NEED_CREATE_BACKEND, IDS_DATABASE # return : 0 - suffix successfully created, otherwise error occured # add_suffix() { [ $DEBUG -eq 1 ] && ${ECHO} "In add_suffix()" [ -n "${NEED_CREATE_SUFFIX}" ] || return 0 [ -n "${NEED_CREATE_BACKEND}" ] && { ${EVAL} "${LDAPADD} ${LDAP_ARGS} ${VERB}" <<EOF dn: cn="${LDAP_SUFFIX}",cn=mapping tree,cn=config objectclass: top objectclass: extensibleObject objectclass: nsMappingTree cn: ${LDAP_SUFFIX} nsslapd-state: backend nsslapd-backend: ${IDS_DATABASE} dn: cn=${IDS_DATABASE},cn=ldbm database,cn=plugins,cn=config objectclass: top objectclass: extensibleObject objectclass: nsBackendInstance cn: ${IDS_DATABASE} nsslapd-suffix: ${LDAP_SUFFIX} EOF [ $? -ne 0 ] && { display_msg create_ldbm_db_error return 1 } ${ECHO} " ${STEP}. Database ${IDS_DATABASE} successfully created" STEP=`expr $STEP + 1` } ${EVAL} "${LDAPADD} ${LDAP_ARGS} ${VERB}" <<EOF dn: ${LDAP_SUFFIX} objectclass: ${LDAP_SUFFIX_OBJ} ${_ATT}: ${_VAL} ${LDAP_SUFFIX_ACI} EOF [ $? -ne 0 ] && { display_msg create_suffix_entry_error return 1 } ${ECHO} " ${STEP}. Suffix ${LDAP_SUFFIX} successfully created" STEP=`expr $STEP + 1` return 0 } # # interactively get suffix and related info from a user # # input : LDAP_BASEDN - Base DN # output : LDAP_SUFFIX - Suffix, _ATT, _VAL - id attribute and its value; # LDAP_SUFFIX_OBJ, LDAP_SUFFIX_ACI - objectclass and aci; # NEED_CREATE_BACKEND - tells whether backend needs to be created; # IDS_DATABASE - prepared ldbm db name # return : 0 - user gave a correct suffix # 1 - suffix given by user cann't be created # get_suffix() { [ $DEBUG -eq 1 ] && ${ECHO} "In get_suffix()" while : do get_ans "Enter suffix to be created (b=back/h=help):" ${LDAP_BASEDN} case "${ANS}" in [Hh] | Help | help | \? ) display_msg create_suffix_help ;; [Bb] | Back | back | \< ) return 1 ;; * ) format_string "${ANS}" LDAP_SUFFIX=${FMT_STR} prep_create_sfx_entry || continue [ -n "${NEED_CREATE_BACKEND}" ] && { IDS_DATABASE_AVAIL= # reset the available db name reenter_suffix= while : do get_ans "Enter ldbm database name (b=back/h=help):" \ ${IDS_DATABASE_AVAIL:-${_VAL}} case "${ANS}" in [Hh] | \? ) display_msg enter_ldbm_db_help ;; [Bb] | \< ) reenter_suffix=1; break ;; * ) IDS_DATABASE="${ANS}" prep_create_sfx_backend && break esac done [ -n "${reenter_suffix}" ] && continue [ $DEBUG -eq 1 ] && cat <<EOF DEBUG: backend name for suffix ${LDAP_SUFFIX} will be ${IDS_DATABASE} EOF } # eventually everything is prepared return 0 ;; esac done } # # print out a script which sets LDAP suffix related preferences # print_suffix_config() { cat <<EOF2 # LDAP suffix related preferences used only if needed IDS_DATABASE="${IDS_DATABASE}" LDAP_SUFFIX_OBJ="$LDAP_SUFFIX_OBJ" LDAP_SUFFIX_ACI=\`cat <<EOF ${LDAP_SUFFIX_ACI} EOF \` export IDS_DATABASE LDAP_SUFFIX_OBJ LDAP_SUFFIX_ACI EOF2 } # # check_basedn_suffix(): check that there is an existing # valid suffix to hold current base DN # return: # 0: valid suffix found or new one should be created, # NEED_CREATE_SUFFIX flag actually indicates that # 1: some error occures # check_basedn_suffix() { [ $DEBUG -eq 1 ] && ${ECHO} "In check_basedn_suffix()" NEED_CREATE_SUFFIX= # find out existing suffixes discover_serv_suffix ${ECHO} " Validating LDAP Base DN and Suffix ..." # check that LDAP Base DN might be added cur_ldap_entry=${LDAP_BASEDN} prev_ldap_entry= while [ "${cur_ldap_entry}" != "${prev_ldap_entry}" ] do [ $DEBUG -eq 1 ] && ${ECHO} "testing LDAP entry: ${cur_ldap_entry}" ${LDAPSEARCH} ${SERVER_ARGS} -b "${cur_ldap_entry}" \ -s one "objectclass=*" > /dev/null 2>&1 if [ $? -eq 0 ]; then break else prev_ldap_entry=${cur_ldap_entry} cur_ldap_entry=`${ECHO} ${cur_ldap_entry} | cut -f2- -d','` fi done if [ "${cur_ldap_entry}" = "${prev_ldap_entry}" ]; then ${ECHO} " No valid suffixes were found for Base DN ${LDAP_BASEDN}" NEED_CREATE_SUFFIX=1 return 0 else [ $DEBUG -eq 1 ] && ${ECHO} "found valid LDAP entry: ${cur_ldap_entry}" # Now looking for relevant suffix for this entry. # LDAP_SUFFIX will then be used to add necessary # base objects. See add_base_objects(). format_string "${cur_ldap_entry}" lower_entry="${FMT_STR}" [ $DEBUG -eq 1 ] && ${ECHO} "final suffix list: ${LDAP_SUFFIX_LIST}" oIFS=$IFS [ $DEBUG -eq 1 ] && ${ECHO} "setting IFS to new line" IFS=' ' for suff in ${LDAP_SUFFIX_LIST} do [ $DEBUG -eq 1 ] && ${ECHO} "testing suffix: ${suff}" format_string "${suff}" lower_suff="${FMT_STR}" if [ "${lower_entry}" = "${lower_suff}" ]; then LDAP_SUFFIX="${suff}" break else dcstmp=`basename "${lower_entry}" "${lower_suff}"` if [ "${dcstmp}" = "${lower_entry}" ]; then # invalid suffix, try next one continue else # valid suffix found LDAP_SUFFIX="${suff}" break fi fi done [ $DEBUG -eq 1 ] && ${ECHO} "setting IFS to original value" IFS=$oIFS [ $DEBUG -eq 1 ] && ${ECHO} "LDAP_SUFFIX: ${LDAP_SUFFIX}" if [ -z "${LDAP_SUFFIX}" ]; then # should not happen, since we found the entry ${ECHO} "Could not find a valid suffix for ${LDAP_BASEDN}." ${ECHO} "Exiting." return 1 fi # Getting relevant database (backend) # IDS_DATABASE will then be used to create indexes. get_backend return 0 fi } # # discover_serv_suffix(): This function queries the server to find # suffixes available # return: 0: OK, suffix found # 1: suffix not determined discover_serv_suffix() { [ $DEBUG -eq 1 ] && ${ECHO} "In discover_serv_suffix()" # Search the server for the TOP of the TREE. ${LDAPSEARCH} ${SERVER_ARGS} -b "" -s base "objectclass=*" > ${TMPDIR}/checkTOP 2>&1 ${GREP} -i namingcontexts ${TMPDIR}/checkTOP | \ ${GREP} -i -v NetscapeRoot > ${TMPDIR}/treeTOP NUM_TOP=`wc -l ${TMPDIR}/treeTOP | awk '{print $1}'` case $NUM_TOP in 0) [ $DEBUG -eq 1 ] && ${ECHO} "DEBUG: No suffix found in LDAP tree" return 1 ;; *) # build the list of suffixes; take out 'namingContexts=' in # each line of ${TMPDIR}/treeTOP LDAP_SUFFIX_LIST=`cat ${TMPDIR}/treeTOP | awk '{ printf("%s\n",substr($0,16,length-15)) }'` ;; esac [ $DEBUG -eq 1 ] && ${ECHO} " LDAP_SUFFIX_LIST = $LDAP_SUFFIX_LIST" return 0 } # # modify_cn(): Change the cn from MUST to MAY in ipNetwork. # modify_cn() { [ $DEBUG -eq 1 ] && ${ECHO} "In modify_cn()" ( cat <<EOF dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.1.1.2.7 NAME 'ipNetwork' DESC 'Standard LDAP objectclass' SUP top STRUCTURAL MUST ( ipNetworkNumber ) MAY ( ipNetmaskNumber $ manager $ cn $ l $ description ) X-ORIGIN 'RFC 2307' )) EOF ) > ${TMPDIR}/ipNetwork_cn # Modify the cn for ipNetwork. ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/ipNetwork_cn ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: update of cn for ipNetwork failed!" cleanup exit 1 fi } # modify_timelimit(): Modify timelimit to user value. modify_timelimit() { [ $DEBUG -eq 1 ] && ${ECHO} "In modify_timelimit()" # Here doc to modify timelimit. ( cat <<EOF dn: cn=config changetype: modify replace: nsslapd-timelimit nsslapd-timelimit: ${IDS_TIMELIMIT} EOF ) > ${TMPDIR}/ids_timelimit # Add the entry. ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/ids_timelimit ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: update of nsslapd-timelimit failed!" cleanup exit 1 fi # Display messages for modifications made in patch. ${ECHO} " ${STEP}. Changed timelimit to ${IDS_TIMELIMIT} in cn=config." STEP=`expr $STEP + 1` } # modify_sizelimit(): Modify sizelimit to user value. modify_sizelimit() { [ $DEBUG -eq 1 ] && ${ECHO} "In modify_sizelimit()" # Here doc to modify sizelimit. ( cat <<EOF dn: cn=config changetype: modify replace: nsslapd-sizelimit nsslapd-sizelimit: ${IDS_SIZELIMIT} EOF ) > ${TMPDIR}/ids_sizelimit # Add the entry. ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/ids_sizelimit ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: update of nsslapd-sizelimit failed!" cleanup exit 1 fi # Display messages for modifications made in patch. ${ECHO} " ${STEP}. Changed sizelimit to ${IDS_SIZELIMIT} in cn=config." STEP=`expr $STEP + 1` } # modify_pwd_crypt(): Modify the passwd storage scheme to support CRYPT. modify_pwd_crypt() { [ $DEBUG -eq 1 ] && ${ECHO} "In modify_pwd_crypt()" # Here doc to modify passwordstoragescheme. # IDS 5.2 moved passwordchangesceme off to a new data structure. if [ $IDS_MAJVER -le 5 ] && [ $IDS_MINVER -le 1 ]; then ( cat <<EOF dn: cn=config changetype: modify replace: passwordstoragescheme passwordstoragescheme: crypt EOF ) > ${TMPDIR}/ids_crypt else ( cat <<EOF dn: cn=Password Policy,cn=config changetype: modify replace: passwordstoragescheme passwordstoragescheme: crypt EOF ) > ${TMPDIR}/ids_crypt fi # Add the entry. ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/ids_crypt ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: update of passwordstoragescheme failed!" cleanup exit 1 fi # Display messages for modifications made in patch. ${ECHO} " ${STEP}. Changed passwordstoragescheme to \"crypt\" in cn=config." STEP=`expr $STEP + 1` } # # add_eq_indexes(): Add indexes to improve search performance. # add_eq_indexes() { [ $DEBUG -eq 1 ] && ${ECHO} "In add_eq_indexes()" # Set eq indexes to add. _INDEXES="uidNumber ipNetworkNumber gidnumber oncrpcnumber automountKey" if [ -z "${IDS_DATABASE}" ]; then get_backend fi # Set _EXT to use as shortcut. _EXT="cn=index,cn=${IDS_DATABASE},cn=ldbm database,cn=plugins,cn=config" # Display message to id current step. ${ECHO} " ${STEP}. Processing eq,pres indexes:" STEP=`expr $STEP + 1` # For loop to create indexes. for i in ${_INDEXES}; do [ $DEBUG -eq 1 ] && ${ECHO} " Adding index for ${i}" # Check if entry exists first, if so, skip to next. ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${i},${_EXT}\" -s base \ \"objectclass=*\" > /dev/null 2>&1" if [ $? -eq 0 ]; then # Display index skipped. ${ECHO} " ${i} (eq,pres) skipped already exists" continue fi # Here doc to create LDIF. ( cat <<EOF dn: cn=${i},${_EXT} objectClass: top objectClass: nsIndex cn: ${i} nsSystemIndex: false nsIndexType: pres nsIndexType: eq EOF ) > ${TMPDIR}/index_${i} # Add the index. ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/index_${i} ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: Adding EQ,PRES index for ${i} failed!" cleanup exit 1 fi # Build date for task name. _YR=`date '+%y'` _MN=`date '+%m'` _DY=`date '+%d'` _H=`date '+%H'` _M=`date '+%M'` _S=`date '+%S'` # Build task name TASKNAME="${i}_${_YR}_${_MN}_${_DY}_${_H}_${_M}_${_S}" # Build the task entry to add. ( cat <<EOF dn: cn=${TASKNAME}, cn=index, cn=tasks, cn=config changetype: add objectclass: top objectclass: extensibleObject cn: ${TASKNAME} nsInstance: ${IDS_DATABASE} nsIndexAttribute: ${i} EOF ) > ${TMPDIR}/task_${i} # Add the task. ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/task_${i} ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: Adding task for ${i} failed!" cleanup exit 1 fi # Wait for task to finish, display current status. while : do ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} \ -b \"cn=${TASKNAME}, cn=index, cn=tasks, cn=config\" -s base \ \"objectclass=*\" nstaskstatus > \"${TMPDIR}/istask_${i}\" 2>&1" ${GREP} "${TASKNAME}" "${TMPDIR}/istask_${i}" > /dev/null 2>&1 if [ $? -ne 0 ]; then break fi TASK_STATUS=`${GREP} -i nstaskstatus "${TMPDIR}/istask_${i}" | head -1 | cut -d: -f2` ${ECHO} " ${i} (eq,pres) $TASK_STATUS \r\c" ${ECHO} "$TASK_STATUS" | ${GREP} "Finished" > /dev/null 2>&1 if [ $? -eq 0 ]; then break fi sleep 2 done # Print newline because of \c. ${ECHO} " " done } # # add_sub_indexes(): Add indexes to improve search performance. # add_sub_indexes() { [ $DEBUG -eq 1 ] && ${ECHO} "In add_sub_indexes()" # Set eq indexes to add. _INDEXES="ipHostNumber membernisnetgroup nisnetgrouptriple" # Set _EXT to use as shortcut. _EXT="cn=index,cn=${IDS_DATABASE},cn=ldbm database,cn=plugins,cn=config" # Display message to id current step. ${ECHO} " ${STEP}. Processing eq,pres,sub indexes:" STEP=`expr $STEP + 1` # For loop to create indexes. for i in ${_INDEXES}; do [ $DEBUG -eq 1 ] && ${ECHO} " Adding index for ${i}" # Check if entry exists first, if so, skip to next. ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${i},${_EXT}\" \ -s base \"objectclass=*\" > /dev/null 2>&1" if [ $? -eq 0 ]; then # Display index skipped. ${ECHO} " ${i} (eq,pres,sub) skipped already exists" continue fi # Here doc to create LDIF. ( cat <<EOF dn: cn=${i},${_EXT} objectClass: top objectClass: nsIndex cn: ${i} nsSystemIndex: false nsIndexType: pres nsIndexType: eq nsIndexType: sub EOF ) > ${TMPDIR}/index_${i} # Add the index. ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/index_${i} ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: Adding EQ,PRES,SUB index for ${i} failed!" cleanup exit 1 fi # Build date for task name. _YR=`date '+%y'` _MN=`date '+%m'` _DY=`date '+%d'` _H=`date '+%H'` _M=`date '+%M'` _S=`date '+%S'` # Build task name TASKNAME="${i}_${_YR}_${_MN}_${_DY}_${_H}_${_M}_${_S}" # Build the task entry to add. ( cat <<EOF dn: cn=${TASKNAME}, cn=index, cn=tasks, cn=config changetype: add objectclass: top objectclass: extensibleObject cn: ${TASKNAME} nsInstance: ${IDS_DATABASE} nsIndexAttribute: ${i} EOF ) > ${TMPDIR}/task_${i} # Add the task. ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/task_${i} ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: Adding task for ${i} failed!" cleanup exit 1 fi # Wait for task to finish, display current status. while : do ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} \ -b \"cn=${TASKNAME}, cn=index, cn=tasks, cn=config\" -s base \ \"objectclass=*\" nstaskstatus > \"${TMPDIR}/istask_${i}\" 2>&1" ${GREP} "${TASKNAME}" "${TMPDIR}/istask_${i}" > /dev/null 2>&1 if [ $? -ne 0 ]; then break fi TASK_STATUS=`${GREP} -i nstaskstatus "${TMPDIR}/istask_${i}" | head -1 | cut -d: -f2` ${ECHO} " ${i} (eq,pres,sub) $TASK_STATUS \r\c" ${ECHO} "$TASK_STATUS" | ${GREP} "Finished" > /dev/null 2>&1 if [ $? -eq 0 ]; then break fi sleep 2 done # Print newline because of \c. ${ECHO} " " done } # # add_vlv_indexes(): Add VLV indexes to improve search performance. # add_vlv_indexes() { [ $DEBUG -eq 1 ] && ${ECHO} "In add_vlv_indexes()" # Set eq indexes to add. # Note semi colon separators because some filters contain colons _INDEX1="${LDAP_DOMAIN}.getgrent;${LDAP_DOMAIN}_group_vlv_index;ou=group;objectClass=posixGroup" _INDEX2="${LDAP_DOMAIN}.gethostent;${LDAP_DOMAIN}_hosts_vlv_index;ou=hosts;objectClass=ipHost" _INDEX3="${LDAP_DOMAIN}.getnetent;${LDAP_DOMAIN}_networks_vlv_index;ou=networks;objectClass=ipNetwork" _INDEX4="${LDAP_DOMAIN}.getpwent;${LDAP_DOMAIN}_passwd_vlv_index;ou=people;objectClass=posixAccount" _INDEX5="${LDAP_DOMAIN}.getrpcent;${LDAP_DOMAIN}_rpc_vlv_index;ou=rpc;objectClass=oncRpc" _INDEX6="${LDAP_DOMAIN}.getspent;${LDAP_DOMAIN}_shadow_vlv_index;ou=people;objectClass=shadowAccount" # Indexes added during NIS to LDAP transition _INDEX7="${LDAP_DOMAIN}.getauhoent;${LDAP_DOMAIN}_auho_vlv_index;automountmapname=auto_home;objectClass=automount" _INDEX8="${LDAP_DOMAIN}.getsoluent;${LDAP_DOMAIN}_solu_vlv_index;ou=people;objectClass=SolarisUserAttr" _INDEX9="${LDAP_DOMAIN}.getauduent;${LDAP_DOMAIN}_audu_vlv_index;ou=people;objectClass=SolarisAuditUser" _INDEX10="${LDAP_DOMAIN}.getauthent;${LDAP_DOMAIN}_auth_vlv_index;ou=SolarisAuthAttr;objectClass=SolarisAuthAttr" _INDEX11="${LDAP_DOMAIN}.getexecent;${LDAP_DOMAIN}_exec_vlv_index;ou=SolarisProfAttr;&(objectClass=SolarisExecAttr)(SolarisKernelSecurityPolicy=*)" _INDEX12="${LDAP_DOMAIN}.getprofent;${LDAP_DOMAIN}_prof_vlv_index;ou=SolarisProfAttr;&(objectClass=SolarisProfAttr)(SolarisAttrLongDesc=*)" _INDEX13="${LDAP_DOMAIN}.getmailent;${LDAP_DOMAIN}_mail_vlv_index;ou=aliases;objectClass=mailGroup" _INDEX14="${LDAP_DOMAIN}.getbootent;${LDAP_DOMAIN}__boot_vlv_index;ou=ethers;&(objectClass=bootableDevice)(bootParameter=*)" _INDEX15="${LDAP_DOMAIN}.getethent;${LDAP_DOMAIN}_ethers_vlv_index;ou=ethers;&(objectClass=ieee802Device)(macAddress=*)" _INDEX16="${LDAP_DOMAIN}.getngrpent;${LDAP_DOMAIN}_netgroup_vlv_index;ou=netgroup;objectClass=nisNetgroup" _INDEX17="${LDAP_DOMAIN}.getipnent;${LDAP_DOMAIN}_ipn_vlv_index;ou=networks;&(objectClass=ipNetwork)(cn=*)" _INDEX18="${LDAP_DOMAIN}.getmaskent;${LDAP_DOMAIN}_mask_vlv_index;ou=networks;&(objectClass=ipNetwork)(ipNetmaskNumber=*)" _INDEX19="${LDAP_DOMAIN}.getprent;${LDAP_DOMAIN}_pr_vlv_index;ou=printers;objectClass=printerService" _INDEX20="${LDAP_DOMAIN}.getip4ent;${LDAP_DOMAIN}_ip4_vlv_index;ou=hosts;&(objectClass=ipHost)(ipHostNumber=*.*)" _INDEX21="${LDAP_DOMAIN}.getip6ent;${LDAP_DOMAIN}_ip6_vlv_index;ou=hosts;&(objectClass=ipHost)(ipHostNumber=*:*)" _INDEXES="$_INDEX1 $_INDEX2 $_INDEX3 $_INDEX4 $_INDEX5 $_INDEX6 $_INDEX7 $_INDEX8 $_INDEX9 $_INDEX10 $_INDEX11 $_INDEX12 $_INDEX13 $_INDEX14 $_INDEX15 $_INDEX16 $_INDEX17 $_INDEX18 $_INDEX19 $_INDEX20 $_INDEX21 " # Set _EXT to use as shortcut. _EXT="cn=${IDS_DATABASE},cn=ldbm database,cn=plugins,cn=config" # Display message to id current step. ${ECHO} " ${STEP}. Processing VLV indexes:" STEP=`expr $STEP + 1` # Reset temp file for vlvindex commands. [ -f ${TMPDIR}/ds5_vlvindex_list ] && rm ${TMPDIR}/ds5_vlvindex_list touch ${TMPDIR}/ds5_vlvindex_list [ -f ${TMPDIR}/ds6_vlvindex_list ] && rm ${TMPDIR}/ds6_vlvindex_list touch ${TMPDIR}/ds6_vlvindex_list # Get the instance name from iDS server. _INSTANCE="<server-instance>" # Default to old output. eval "${LDAPSEARCH} -v ${LDAP_ARGS} -b \"cn=config\" -s base \"objectclass=*\" nsslapd-instancedir | ${GREP} 'nsslapd-instancedir=' | cut -d'=' -f2- > ${TMPDIR}/instance_name 2>&1" ${GREP} "slapd-" ${TMPDIR}/instance_name > /dev/null 2>&1 # Check if seems right? if [ $? -eq 0 ]; then # If success, grab name after "slapd-". _INST_DIR=`cat ${TMPDIR}/instance_name` _INSTANCE=`basename "${_INST_DIR}" | cut -d'-' -f2-` fi # For loop to create indexes. for p in ${_INDEXES}; do [ $DEBUG -eq 1 ] && ${ECHO} " Adding index for ${i}" # Break p (pair) into i and j parts. i=`${ECHO} $p | cut -d';' -f1` j=`${ECHO} $p | cut -d';' -f2` k=`${ECHO} $p | cut -d';' -f3` m=`${ECHO} $p | cut -d';' -f4` # Set _jEXT to use as shortcut. _jEXT="cn=${j},${_EXT}" # Check if entry exists first, if so, skip to next. ${LDAPSEARCH} ${SERVER_ARGS} -b "cn=${i},${_jEXT}" -s base "objectclass=*" > /dev/null 2>&1 if [ $? -eq 0 ]; then # Display index skipped. ${ECHO} " ${i} vlv_index skipped already exists" continue fi # Compute the VLV Scope from the LDAP_SEARCH_SCOPE. # NOTE: A value of "base (0)" does not make sense. case "$LDAP_SEARCH_SCOPE" in sub) VLV_SCOPE="2" ;; *) VLV_SCOPE="1" ;; esac # Here doc to create LDIF. ( cat <<EOF dn: ${_jEXT} objectClass: top objectClass: vlvSearch cn: ${j} vlvbase: ${k},${LDAP_BASEDN} vlvscope: ${VLV_SCOPE} vlvfilter: (${m}) aci: (target="ldap:///${_jEXT}")(targetattr="*")(version 3.0; acl "Config";allow(read,search,compare)userdn="ldap:///anyone";) dn: cn=${i},${_jEXT} cn: ${i} vlvSort: cn uid objectclass: top objectclass: vlvIndex EOF ) > ${TMPDIR}/vlv_index_${i} # Add the index. ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/vlv_index_${i} ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: Adding VLV index for ${i} failed!" cleanup exit 1 fi # Print message that index was created. ${ECHO} " ${i} vlv_index Entry created" # Add command to list of vlvindex commands to run. ${ECHO} " directoryserver -s ${_INSTANCE} vlvindex -n ${IDS_DATABASE} -T ${i}" >> ${TMPDIR}/ds5_vlvindex_list ${ECHO} " <install-path>/bin/dsadm reindex -l -t ${i} <directory-instance-path> ${LDAP_SUFFIX}" >> ${TMPDIR}/ds6_vlvindex_list done } # # display_vlv_cmds(): Display VLV index commands to run on server. # display_vlv_cmds() { if [ -s "${TMPDIR}/ds5_vlvindex_list" -o \ -s "${TMPDIR}/ds6_vlvindex_list" ]; then display_msg display_vlv_list fi if [ -s "${TMPDIR}/ds5_vlvindex_list" ]; then cat ${TMPDIR}/ds5_vlvindex_list fi cat << EOF EOF if [ -s "${TMPDIR}/ds6_vlvindex_list" ]; then cat ${TMPDIR}/ds6_vlvindex_list fi } # # update_schema_attr(): Update Schema to support Naming. # update_schema_attr() { [ $DEBUG -eq 1 ] && ${ECHO} "In update_schema_attr()" ( cat <<EOF dn: cn=schema changetype: modify add: attributetypes attributetypes: ( 1.3.6.1.1.1.1.28 NAME 'nisPublickey' DESC 'NIS public key' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' ) attributetypes: ( 1.3.6.1.1.1.1.29 NAME 'nisSecretkey' DESC 'NIS secret key' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' ) attributetypes: ( 1.3.6.1.1.1.1.30 NAME 'nisDomain' DESC 'NIS domain' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' ) attributetypes: ( 1.3.6.1.1.1.1.31 NAME 'automountMapName' DESC 'automount Map Name' EQUALITY caseExactIA5Match SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.1.1.1.32 NAME 'automountKey' DESC 'automount Key Value' EQUALITY caseExactIA5Match SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.1.1.1.33 NAME 'automountInformation' DESC 'automount information' EQUALITY caseExactIA5Match SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.1.1.12 NAME 'nisNetIdUser' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' ) attributetypes: ( 1.3.6.1.4.1.42.2.27.1.1.13 NAME 'nisNetIdGroup' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' ) attributetypes: ( 1.3.6.1.4.1.42.2.27.1.1.14 NAME 'nisNetIdHost' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' ) attributetypes: ( rfc822mailMember-oid NAME 'rfc822mailMember' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' ) attributetypes: ( 2.16.840.1.113730.3.1.30 NAME 'mgrpRFC822MailMember' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.15 NAME 'SolarisLDAPServers' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.16 NAME 'SolarisSearchBaseDN' SYNTAX '1.3.6.1.4.1.1466.115.121.1.12' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.17 NAME 'SolarisCacheTTL' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.18 NAME 'SolarisBindDN' SYNTAX '1.3.6.1.4.1.1466.115.121.1.12' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.19 NAME 'SolarisBindPassword' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.20 NAME 'SolarisAuthMethod' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15') attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.21 NAME 'SolarisTransportSecurity' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15') attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.22 NAME 'SolarisCertificatePath' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.23 NAME 'SolarisCertificatePassword' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.24 NAME 'SolarisDataSearchDN' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15') attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.25 NAME 'SolarisSearchScope' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.26 NAME 'SolarisSearchTimeLimit' SYNTAX '1.3.6.1.4.1.1466.115.121.1.27' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.27 NAME 'SolarisPreferredServer' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15') attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.28 NAME 'SolarisPreferredServerOnly' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.29 NAME 'SolarisSearchReferral' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.4 NAME 'SolarisAttrKeyValue' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.5 NAME 'SolarisAuditAlways' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.6 NAME 'SolarisAuditNever' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.7 NAME 'SolarisAttrShortDesc' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.8 NAME 'SolarisAttrLongDesc' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.9 NAME 'SolarisKernelSecurityPolicy' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.10 NAME 'SolarisProfileType' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.11 NAME 'SolarisProfileId' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.12 NAME 'SolarisUserQualifier' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.13 NAME 'SolarisAttrReserved1' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.14 NAME 'SolarisAttrReserved2' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.1 NAME 'SolarisProjectID' SYNTAX '1.3.6.1.4.1.1466.115.121.1.27' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.2 NAME 'SolarisProjectName' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.3 NAME 'SolarisProjectAttr' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' ) attributetypes: ( memberGid-oid NAME 'memberGid' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' ) attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.0 NAME 'defaultServerList' DESC 'Default LDAP server host address used by a DUA' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.1 NAME 'defaultSearchBase' DESC 'Default LDAP base DN used by a DUA' SYNTAX '1.3.6.1.4.1.1466.115.121.1.12' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.2 NAME 'preferredServerList' DESC 'Preferred LDAP server host addresses to be used by a DUA' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.3 NAME 'searchTimeLimit' DESC 'Maximum time in seconds a DUA should allow for a search to complete' SYNTAX '1.3.6.1.4.1.1466.115.121.1.27' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.4 NAME 'bindTimeLimit' DESC 'Maximum time in seconds a DUA should allow for the bind operation to complete' SYNTAX '1.3.6.1.4.1.1466.115.121.1.27' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.5 NAME 'followReferrals' DESC 'Tells DUA if it should follow referrals returned by a DSA search result' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.6 NAME 'authenticationMethod' DESC 'A keystring which identifies the type of authentication method used to contact the DSA' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.7 NAME 'profileTTL' DESC 'Time to live before a client DUA should re-read this configuration profile' SYNTAX '1.3.6.1.4.1.1466.115.121.1.27' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.14 NAME 'serviceSearchDescriptor' DESC 'LDAP search descriptor list used by Naming-DUA' SYNTAX '1.3.6.1.4.1.1466.115.121.1.26' ) attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.9 NAME 'attributeMap' DESC 'Attribute mappings used by a Naming-DUA' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' ) attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.10 NAME 'credentialLevel' DESC 'Identifies type of credentials a DUA should use when binding to the LDAP server' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.11 NAME 'objectclassMap' DESC 'Objectclass mappings used by a Naming-DUA' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' ) attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.12 NAME 'defaultSearchScope' DESC 'Default search scope used by a DUA' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.13 NAME 'serviceCredentialLevel' DESC 'Search scope used by a service of the DUA' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.15 NAME 'serviceAuthenticationMethod' DESC 'Authentication Method used by a service of the DUA' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 ) attributetypes:( 1.3.18.0.2.4.1140 NAME 'printer-uri' DESC 'A URI supported by this printer. This URI SHOULD be used as a relative distinguished name (RDN). If printer-xri-supported is implemented, then this URI value MUST be listed in a member value of printer-xri-supported.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE ) attributetypes:( 1.3.18.0.2.4.1107 NAME 'printer-xri-supported' DESC 'The unordered list of XRI (extended resource identifiers) supported by this printer. Each member of the list consists of a URI (uniform resource identifier) followed by optional authentication and security metaparameters.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 ) attributetypes:( 1.3.18.0.2.4.1135 NAME 'printer-name' DESC 'The site-specific administrative name of this printer, more end-user friendly than a URI.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE ) attributetypes:( 1.3.18.0.2.4.1119 NAME 'printer-natural-language-configured' DESC 'The configured language in which error and status messages will be generated (by default) by this printer. Also, a possible language for printer string attributes set by operator, system administrator, or manufacturer. Also, the (declared) language of the "printer-name", "printer-location", "printer-info", and "printer-make-and-model" attributes of this printer. For example: "en-us" (US English) or "fr-fr" (French in France) Legal values of language tags conform to [RFC3066] "Tags for the Identification of Languages".' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE ) attributetypes:( 1.3.18.0.2.4.1136 NAME 'printer-location' DESC 'Identifies the location of the printer. This could include things like: "in Room 123A", "second floor of building XYZ".' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE ) attributetypes:( 1.3.18.0.2.4.1139 NAME 'printer-info' DESC 'Identifies the descriptive information about this printer. This could include things like: "This printer can be used for printing color transparencies for HR presentations", or "Out of courtesy for others, please print only small (1-5 page) jobs at this printer", or even "This printer is going away on July 1, 1997, please find a new printer".' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE ) attributetypes:( 1.3.18.0.2.4.1134 NAME 'printer-more-info' DESC 'A URI used to obtain more information about this specific printer. For example, this could be an HTTP type URI referencing an HTML page accessible to a Web Browser. The information obtained from this URI is intended for end user consumption.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE ) attributetypes:( 1.3.18.0.2.4.1138 NAME 'printer-make-and-model' DESC 'Identifies the make and model of the device. The device manufacturer MAY initially populate this attribute.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE ) attributetypes:( 1.3.18.0.2.4.1133 NAME 'printer-ipp-versions-supported' DESC 'Identifies the IPP protocol version(s) that this printer supports, including major and minor versions, i.e., the version numbers for which this Printer implementation meets the conformance requirements.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} ) attributetypes:( 1.3.18.0.2.4.1132 NAME 'printer-multiple-document-jobs-supported' DESC 'Indicates whether or not the printer supports more than one document per job, i.e., more than one Send-Document or Send-Data operation with document data.' EQUALITY booleanMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE ) attributetypes:( 1.3.18.0.2.4.1109 NAME 'printer-charset-configured' DESC 'The configured charset in which error and status messages will be generated (by default) by this printer. Also, a possible charset for printer string attributes set by operator, system administrator, or manufacturer. For example: "utf-8" (ISO 10646/Unicode) or "iso-8859-1" (Latin1). Legal values are defined by the IANA Registry of Coded Character Sets and the "(preferred MIME name)" SHALL be used as the tag. For coherence with IPP Model, charset tags in this attribute SHALL be lowercase normalized. This attribute SHOULD be static (time of registration) and SHOULD NOT be dynamically refreshed attributetypes: (subsequently).' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{63} SINGLE-VALUE ) attributetypes:( 1.3.18.0.2.4.1131 NAME 'printer-charset-supported' DESC 'Identifies the set of charsets supported for attribute type values of type Directory String for this directory entry. For example: "utf-8" (ISO 10646/Unicode) or "iso-8859-1" (Latin1). Legal values are defined by the IANA Registry of Coded Character Sets and the preferred MIME name.' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{63} ) attributetypes:( 1.3.18.0.2.4.1137 NAME 'printer-generated-natural-language-supported' DESC 'Identifies the natural language(s) supported for this directory entry. For example: "en-us" (US English) or "fr-fr" (French in France). Legal values conform to [RFC3066], Tags for the Identification of Languages.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{63} ) attributetypes:( 1.3.18.0.2.4.1130 NAME 'printer-document-format-supported' DESC 'The possible document formats in which data may be interpreted and printed by this printer. Legal values are MIME types come from the IANA Registry of Internet Media Types.' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} ) attributetypes:( 1.3.18.0.2.4.1129 NAME 'printer-color-supported' DESC 'Indicates whether this printer is capable of any type of color printing at all, including highlight color.' EQUALITY booleanMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE ) attributetypes:( 1.3.18.0.2.4.1128 NAME 'printer-compression-supported' DESC 'Compression algorithms supported by this printer. For example: "deflate, gzip". Legal values include; "none", "deflate" attributetypes: (public domain ZIP), "gzip" (GNU ZIP), "compress" (UNIX).' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} ) attributetypes:( 1.3.18.0.2.4.1127 NAME 'printer-pages-per-minute' DESC 'The nominal number of pages per minute which may be output by this printer (e.g., a simplex or black-and-white printer). This attribute is informative, NOT a service guarantee. Typically, it is the value used in marketing literature to describe this printer.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) attributetypes:( 1.3.18.0.2.4.1126 NAME 'printer-pages-per-minute-color' DESC 'The nominal number of color pages per minute which may be output by this printer (e.g., a simplex or color printer). This attribute is informative, NOT a service guarantee. Typically, it is the value used in marketing literature to describe this printer.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) attributetypes:( 1.3.18.0.2.4.1125 NAME 'printer-finishings-supported' DESC 'The possible finishing operations supported by this printer. Legal values include; "none", "staple", "punch", "cover", "bind", "saddle-stitch", "edge-stitch", "staple-top-left", "staple-bottom-left", "staple-top-right", "staple-bottom-right", "edge-stitch-left", "edge-stitch-top", "edge-stitch-right", "edge-stitch-bottom", "staple-dual-left", "staple-dual-top", "staple-dual-right", "staple-dual-bottom".' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} ) attributetypes:( 1.3.18.0.2.4.1124 NAME 'printer-number-up-supported' DESC 'The possible numbers of print-stream pages to impose upon a single side of an instance of a selected medium. Legal values include; 1, 2, and 4. Implementations may support other values.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 ) attributetypes:( 1.3.18.0.2.4.1123 NAME 'printer-sides-supported' DESC 'The number of impression sides (one or two) and the two-sided impression rotations supported by this printer. Legal values include; "one-sided", "two-sided-long-edge", "two-sided-short-edge".' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} ) attributetypes:( 1.3.18.0.2.4.1122 NAME 'printer-media-supported' DESC 'The standard names/types/sizes (and optional color suffixes) of the media supported by this printer. For example: "iso-a4", "envelope", or "na-letter-white". Legal values conform to ISO 10175, Document Printing Application (DPA), and any IANA registered extensions.' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} ) attributetypes:( 1.3.18.0.2.4.1117 NAME 'printer-media-local-supported' DESC 'Site-specific names of media supported by this printer, in the language in "printer-natural-language-configured". For example: "purchasing-form" (site-specific name) as opposed to (in "printer-media-supported"): "na-letter" (standard keyword from ISO 10175).' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} ) attributetypes:( 1.3.18.0.2.4.1121 NAME 'printer-resolution-supported' DESC 'List of resolutions supported for printing documents by this printer. Each resolution value is a string with 3 fields: 1) Cross feed direction resolution (positive integer), 2) Feed direction resolution (positive integer), 3) Resolution unit. Legal values are "dpi" (dots per inch) and "dpcm" (dots per centimeter). Each resolution field is delimited by ">". For example: "300> 300> dpi>".' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{255} ) attributetypes:( 1.3.18.0.2.4.1120 NAME 'printer-print-quality-supported' DESC 'List of print qualities supported for printing documents on this printer. For example: "draft, normal". Legal values include; "unknown", "draft", "normal", "high".' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} ) attributetypes:( 1.3.18.0.2.4.1110 NAME 'printer-job-priority-supported' DESC 'Indicates the number of job priority levels supported. An IPP conformant printer which supports job priority must always support a full range of priorities from "1" to "100" (to ensure consistent behavior), therefore this attribute describes the "granularity". Legal values of this attribute are from "1" to "100".' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) attributetypes:( 1.3.18.0.2.4.1118 NAME 'printer-copies-supported' DESC 'The maximum number of copies of a document that may be printed as a single job. A value of "0" indicates no maximum limit. A value of "-1" indicates unknown.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) attributetypes:( 1.3.18.0.2.4.1111 NAME 'printer-job-k-octets-supported' DESC 'The maximum size in kilobytes (1,024 octets actually) incoming print job that this printer will accept. A value of "0" indicates no maximum limit. A value of "-1" indicates unknown.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) attributetypes:( 1.3.18.0.2.4.1112 NAME 'printer-current-operator' DESC 'The name of the current human operator responsible for operating this printer. It is suggested that this string include information that would enable other humans to reach the operator, such as a phone number.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE ) attributetypes:( 1.3.18.0.2.4.1113 NAME 'printer-service-person' DESC 'The name of the current human service person responsible for servicing this printer. It is suggested that this string include information that would enable other humans to reach the service person, such as a phone number.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE ) attributetypes:( 1.3.18.0.2.4.1114 NAME 'printer-delivery-orientation-supported' DESC 'The possible delivery orientations of pages as they are printed and ejected from this printer. Legal values include; "unknown", "face-up", and "face-down".' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} ) attributetypes:( 1.3.18.0.2.4.1115 NAME 'printer-stacking-order-supported' DESC 'The possible stacking order of pages as they are printed and ejected from this printer. Legal values include; "unknown", "first-to-last", "last-to-first".' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} ) attributetypes:( 1.3.18.0.2.4.1116 NAME 'printer-output-features-supported' DESC 'The possible output features supported by this printer. Legal values include; "unknown", "bursting", "decollating", "page-collating", "offset-stacking".' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} ) attributetypes:( 1.3.18.0.2.4.1108 NAME 'printer-aliases' DESC 'Site-specific administrative names of this printer in addition the printer name specified for printer-name.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127} ) attributetypes:( 1.3.6.1.4.1.42.2.27.5.1.63 NAME 'sun-printer-bsdaddr' DESC 'Sets the server, print queue destination name and whether the client generates protocol extensions. "Solaris" specifies a Solaris print server extension. The value is represented by the following value: server "," destination ", Solaris".' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE ) attributetypes:( 1.3.6.1.4.1.42.2.27.5.1.64 NAME 'sun-printer-kvp' DESC 'This attribute contains a set of key value pairs which may have meaning to the print subsystem or may be user defined. Each value is represented by the following: key "=" value.' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' ) attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.57 NAME 'nisplusTimeZone' DESC 'tzone column from NIS+ timezone table' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetypes:( 1.3.6.1.4.1.42.2.27.5.1.67 NAME 'ipTnetTemplateName' DESC 'Trusted Solaris network template template_name' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetypes:( 1.3.6.1.4.1.42.2.27.5.1.68 NAME 'ipTnetNumber' DESC 'Trusted Solaris network template ip_address' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) EOF ) > ${TMPDIR}/schema_attr # Add the entry. ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/schema_attr ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: update of schema attributes failed!" cleanup exit 1 fi # Display message that schema is updated. ${ECHO} " ${STEP}. Schema attributes have been updated." STEP=`expr $STEP + 1` } # # update_schema_obj(): Update the schema objectclass definitions. # update_schema_obj() { [ $DEBUG -eq 1 ] && ${ECHO} "In update_schema_obj()" # Add the objectclass definitions. ( cat <<EOF dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.1.1.2.14 NAME 'NisKeyObject' SUP 'top' MUST (objectclass $ cn $ nisPublickey $ nisSecretkey) MAY (uidNumber $ description)) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.1.1.2.15 NAME 'nisDomainObject' SUP 'top' MUST (objectclass $ nisDomain) MAY ()) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.1.1.2.16 NAME 'automountMap' SUP 'top' MUST (objectclass $ automountMapName) MAY (description)) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.1.1.2.17 NAME 'automount' SUP 'top' MUST (objectclass $ automountKey $ automountInformation ) MAY (description)) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.7 NAME 'SolarisNamingProfile' SUP 'top' MUST (objectclass $ cn $ SolarisLDAPservers $ SolarisSearchBaseDN) MAY (SolarisBindDN $ SolarisBindPassword $ SolarisAuthMethod $ SolarisTransportSecurity $ SolarisCertificatePath $ SolarisCertificatePassword $ SolarisDataSearchDN $ SolarisSearchScope $ SolarisSearchTimeLimit $ SolarisPreferredServer $ SolarisPreferredServerOnly $ SolarisCacheTTL $ SolarisSearchReferral)) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 2.16.840.1.113730.3.2.4 NAME 'mailGroup' SUP 'top' MUST (objectclass $ mail) MAY (cn $ mgrpRFC822MailMember)) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.4.1.42.2.27.1.2.5 NAME 'nisMailAlias' SUP 'top' MUST (objectclass $ cn) MAY (rfc822mailMember)) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.4.1.42.2.27.1.2.6 NAME 'nisNetId' SUP 'top' MUST (objectclass $ cn) MAY (nisNetIdUser $ nisNetIdGroup $ nisNetIdHost)) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.2 NAME 'SolarisAuditUser' SUP 'top' AUXILIARY MUST (objectclass) MAY (SolarisAuditAlways $ SolarisAuditNever)) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.3 NAME 'SolarisUserAttr' SUP 'top' AUXILIARY MUST (objectclass) MAY (SolarisUserQualifier $ SolarisAttrReserved1 $ SolarisAttrReserved2 $ SolarisAttrKeyValue)) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.4 NAME 'SolarisAuthAttr' SUP 'top' MUST (objectclass $ cn) MAY (SolarisAttrReserved1 $ SolarisAttrReserved2 $ SolarisAttrShortDesc $ SolarisAttrLongDesc $ SolarisAttrKeyValue)) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.5 NAME 'SolarisProfAttr' SUP 'top' MUST (objectclass $ cn) MAY (SolarisAttrReserved1 $ SolarisAttrReserved2 $ SolarisAttrLongDesc $ SolarisAttrKeyValue)) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.6 NAME 'SolarisExecAttr' SUP 'top' AUXILIARY MUST (objectclass) MAY (SolarisKernelSecurityPolicy $ SolarisProfileType $ SolarisAttrReserved1 $ SolarisAttrReserved2 $ SolarisProfileID $ SolarisAttrKeyValue)) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.1 NAME 'SolarisProject' SUP 'top' MUST (objectclass $ SolarisProjectID $ SolarisProjectName) MAY (memberUid $ memberGid $ description $ SolarisProjectAttr)) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.4.1.11.1.3.1.2.4 NAME 'DUAConfigProfile' SUP 'top' DESC 'Abstraction of a base configuration for a DUA' MUST (cn) MAY (defaultServerList $ preferredServerList $ defaultSearchBase $ defaultSearchScope $ searchTimeLimit $ bindTimeLimit $ credentialLevel $ authenticationMethod $ followReferrals $ serviceSearchDescriptor $ serviceCredentialLevel $ serviceAuthenticationMethod $ objectclassMap $ attributeMap $ profileTTL)) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.18.0.2.6.2549 NAME 'slpService' DESC 'DUMMY definition' SUP 'top' MUST (objectclass) MAY ()) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.18.0.2.6.254 NAME 'slpServicePrinter' DESC 'Service Location Protocol (SLP) information.' AUXILIARY SUP 'slpService') dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.18.0.2.6.258 NAME 'printerAbstract' DESC 'Printer related information.' ABSTRACT SUP 'top' MAY ( printer-name $ printer-natural-language-configured $ printer-location $ printer-info $ printer-more-info $ printer-make-and-model $ printer-multiple-document-jobs-supported $ printer-charset-configured $ printer-charset-supported $ printer-generated-natural-language-supported $ printer-document-format-supported $ printer-color-supported $ printer-compression-supported $ printer-pages-per-minute $ printer-pages-per-minute-color $ printer-finishings-supported $ printer-number-up-supported $ printer-sides-supported $ printer-media-supported $ printer-media-local-supported $ printer-resolution-supported $ printer-print-quality-supported $ printer-job-priority-supported $ printer-copies-supported $ printer-job-k-octets-supported $ printer-current-operator $ printer-service-person $ printer-delivery-orientation-supported $ printer-stacking-order-supported $ printer-output-features-supported )) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.18.0.2.6.255 NAME 'printerService' DESC 'Printer information.' STRUCTURAL SUP 'printerAbstract' MAY ( printer-uri $ printer-xri-supported )) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.18.0.2.6.257 NAME 'printerServiceAuxClass' DESC 'Printer information.' AUXILIARY SUP 'printerAbstract' MAY ( printer-uri $ printer-xri-supported )) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.18.0.2.6.256 NAME 'printerIPP' DESC 'Internet Printing Protocol (IPP) information.' AUXILIARY SUP 'top' MAY ( printer-ipp-versions-supported $ printer-multiple-document-jobs-supported )) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.18.0.2.6.253 NAME 'printerLPR' DESC 'LPR information.' AUXILIARY SUP 'top' MUST ( printer-name ) MAY ( printer-aliases)) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.14 NAME 'sunPrinter' DESC 'Sun printer information' SUP 'top' AUXILIARY MUST (objectclass $ printer-name) MAY (sun-printer-bsdaddr $ sun-printer-kvp)) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.12 NAME 'nisplusTimeZoneData' DESC 'NIS+ timezone table data' SUP top STRUCTURAL MUST ( cn ) MAY ( nisplusTimeZone $ description ) ) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.8 NAME 'ipTnetTemplate' DESC 'Object class for TSOL network templates' SUP 'top' MUST ( objectclass $ ipTnetTemplateName ) MAY ( SolarisAttrKeyValue ) ) dn: cn=schema changetype: modify add: objectclasses objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.9 NAME 'ipTnetHost' DESC 'Associates an IP address or wildcard with a TSOL template_name' SUP 'top' AUXILIARY MUST ( objectclass $ ipTnetNumber ) ) EOF ) > ${TMPDIR}/schema_obj # Add the entry. ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/schema_obj ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: update of schema objectclass definitions failed!" cleanup exit 1 fi # Display message that schema is updated. ${ECHO} " ${STEP}. Schema objectclass definitions have been added." STEP=`expr $STEP + 1` } # # modify_top_aci(): Modify the ACI for the top entry to disable self modify # of user attributes. # modify_top_aci() { [ $DEBUG -eq 1 ] && ${ECHO} "In modify_top_aci()" # Set ACI Name ACI_NAME="LDAP_Naming_Services_deny_write_access" # Search for ACI_NAME eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base objectclass=* aci > ${TMPDIR}/chk_top_aci 2>&1" if [ $? -ne 0 ]; then ${ECHO} "Error searching aci for ${LDAP_BASEDN}" cat ${TMPDIR}/chk_top_aci cleanup exit 1 fi ${GREP} "${ACI_NAME}" ${TMPDIR}/chk_top_aci > /dev/null 2>&1 if [ $? -eq 0 ]; then ${ECHO} " ${STEP}. Top level ACI ${ACI_NAME} already exists for ${LDAP_BASEDN}." STEP=`expr $STEP + 1` return 0 fi # Crate LDIF for top level ACI. ( cat <<EOF dn: ${LDAP_BASEDN} changetype: modify add: aci aci: (targetattr = "cn||uid||uidNumber||gidNumber||homeDirectory||shadowLastChange||shadowMin||shadowMax||shadowWarning||shadowInactive||shadowExpire||shadowFlag||memberUid||SolarisAuditAlways||SolarisAuditNever||SolarisAttrKeyValue||SolarisAttrReserved1||SolarisAttrReserved2||SolarisUserQualifier")(version 3.0; acl ${ACI_NAME}; deny (write) userdn = "ldap:///self";) - EOF ) > ${TMPDIR}/top_aci # Add the entry. ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/top_aci ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: Modify of top level ACI failed! (restricts self modify)" cleanup exit 1 fi # Display message that schema is updated. ${ECHO} " ${STEP}. ACI for ${LDAP_BASEDN} modified to disable self modify." STEP=`expr $STEP + 1` } # # add_vlv_aci(): Add access control information (aci) for VLV. # add_vlv_aci() { [ $DEBUG -eq 1 ] && ${ECHO} "In add_vlv_aci()" # Add the VLV ACI. ( cat <<EOF dn: oid=2.16.840.1.113730.3.4.9,cn=features,cn=config changetype: modify replace: aci aci: (targetattr != "aci") (version 3.0; acl "VLV Request Control"; allow(read,search,compare) userdn = "ldap:///anyone";) EOF ) > ${TMPDIR}/vlv_aci # Add the entry. ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/vlv_aci ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: Add of VLV ACI failed!" cleanup exit 1 fi # Display message that schema is updated. ${ECHO} " ${STEP}. Add of VLV Access Control Information (ACI)." STEP=`expr $STEP + 1` } # # set_nisdomain(): Add the NisDomainObject to the Base DN. # set_nisdomain() { [ $DEBUG -eq 1 ] && ${ECHO} "In set_nisdomain()" # Check if nisDomain is already set. ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base \ \"objectclass=*\"" > ${TMPDIR}/chk_nisdomain 2>&1 ${EVAL} "${GREP} -i nisDomain ${TMPDIR}/chk_nisdomain ${VERB}" if [ $? -eq 0 ]; then ${ECHO} " ${STEP}. NisDomainObject for ${LDAP_BASEDN} was already set." STEP=`expr $STEP + 1` return 0 fi # Add the new top level containers. ( cat <<EOF dn: ${LDAP_BASEDN} changetype: modify objectclass: nisDomainObject nisdomain: ${LDAP_DOMAIN} EOF ) > ${TMPDIR}/nis_domain # Add the entry. ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/nis_domain ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: update of NisDomainObject in ${LDAP_BASEDN} failed." cleanup exit 1 fi # Display message that schema is updated. ${ECHO} " ${STEP}. NisDomainObject added to ${LDAP_BASEDN}." STEP=`expr $STEP + 1` } # # check_attrName(): Check that the attribute name is valid. # $1 Key to check. # Returns 0 : valid name 1 : invalid name # check_attrName() { [ $DEBUG -eq 1 ] && ${ECHO} "In check_attrName()" [ $DEBUG -eq 1 ] && ${ECHO} "check_attrName: Input Param = $1" ${ECHO} $1 | ${EGREP} '^[0-9]+(\.[0-9]+)*$' > /dev/null 2>&1 if [ $? -eq 0 ]; then ${EVAL} "${LDAPSEARCH} ${SERVER_ARGS} -b cn=schema -s base \"objectclass=*\" \ attributeTypes | ${EGREP} -i '^attributetypes[ ]*=[ ]*\([ ]*$1 ' ${VERB}" else ${EVAL} "${LDAPSEARCH} ${SERVER_ARGS} -b cn=schema -s base \"objectclass=*\" \ attributeTypes | ${EGREP} -i \"'$1'\" ${VERB}" fi if [ $? -ne 0 ]; then return 1 else return 0 fi } # # get_objectclass(): Determine the objectclass for the given attribute name # $1 Attribute name to check. # _ATTR_NAME Return value, Object Name or NULL if unknown to idsconfig. # # NOTE: An attribute name can be valid but still we might not be able # to determine the objectclass from the table. # In such cases, the user needs to create the necessary object(s). # get_objectclass() { [ $DEBUG -eq 1 ] && ${ECHO} "In get_objectclass()" [ $DEBUG -eq 1 ] && ${ECHO} "get_objectclass: Input Param = $1" # Set return value to NULL string. _ATTR_NAME="" # Test key for type: case `${ECHO} ${1} | tr '[A-Z]' '[a-z]'` in ou | organizationalunitname | 2.5.4.11) _ATTR_NAME="organizationalUnit" ;; dc | domaincomponent | 0.9.2342.19200300.100.1.25) _ATTR_NAME="domain" ;; o | organizationname | 2.5.4.10) _ATTR_NAME="organization" ;; c | countryname | 2.5.4.6) _ATTR_NAME="country" ;; *) _ATTR_NAME="" ;; esac [ $DEBUG -eq 1 ] && ${ECHO} "get_objectclass: _ATTR_NAME = $_ATTR_NAME" } # # add_base_objects(): Add any necessary base objects. # add_base_objects() { [ $DEBUG -eq 1 ] && ${ECHO} "In add_base_objects()" # Convert to lower case for basename. format_string "${LDAP_BASEDN}" LOWER_BASEDN="${FMT_STR}" format_string "${LDAP_SUFFIX}" LOWER_SUFFIX="${FMT_STR}" [ $DEBUG -eq 1 ] && ${ECHO} "LOWER_BASEDN: ${LOWER_BASEDN}" [ $DEBUG -eq 1 ] && ${ECHO} "LOWER_SUFFIX: ${LOWER_SUFFIX}" # Create additional components. if [ "${LOWER_BASEDN}" = "${LOWER_SUFFIX}" ]; then [ $DEBUG -eq 1 ] && ${ECHO} "Base DN and Suffix equivalent" else # first, test that the suffix is valid dcstmp=`basename "${LOWER_BASEDN}" "${LOWER_SUFFIX}"` if [ "$dcstmp" = "${LOWER_BASEDN}" ]; then # should not happen since check_basedn_suffix() succeeded ${ECHO} "Invalid suffix ${LOWER_SUFFIX}" ${ECHO} "for Base DN ${LOWER_BASEDN}" cleanup exit 1 fi # OK, suffix is valid, start working with LDAP_BASEDN # field separator is ',' (i.e., space is a valid character) dcstmp2="`${ECHO} ${LDAP_BASEDN} | sed -e 's/[ ]*,[ ]*/,/g' -e 's/[ ]*=[ ]*/=/g'`" dcs="" # use dcstmp to count the loop, and dcstmp2 to get the correct # string case # dcs should be in reverse order, only for these components # that need to be added while [ -n "${dcstmp}" ] do i2=`${ECHO} "$dcstmp2" | cut -f1 -d','` dk=`${ECHO} $i2 | awk -F= '{print $1}'` dc=`${ECHO} $i2 | awk -F= '{print $2}'` dcs="$dk=$dc,$dcs"; dcstmp2=`${ECHO} "$dcstmp2" | cut -f2- -d','` dcstmp=`${ECHO} "$dcstmp" | cut -f2- -d','` [ $DEBUG -eq 1 ] && \ ${ECHO} "dcs: ${dcs}\ndcstmp: ${dcstmp}\ndcstmp2: ${dcstmp2}\n" done lastdc=${LDAP_SUFFIX} dc=`${ECHO} "${dcs}" | cut -f1 -d','` dcstmp=`${ECHO} "${dcs}" | cut -f2- -d','` while [ -n "${dc}" ]; do # Get Key and component from $dc. dk2=`${ECHO} $dc | awk -F= '{print $1}'` dc2=`${ECHO} $dc | awk -F= '{print $2}'` # At this point, ${dk2} is a valid attribute name # Check if entry exists first, if so, skip to next. ${LDAPSEARCH} ${SERVER_ARGS} -b "${dk2}=${dc2},$lastdc" -s base "objectclass=*" > /dev/null 2>&1 if [ $? -eq 0 ]; then # Set the $lastdc to new dc. lastdc="${dk2}=${dc2},$lastdc" # Process next component. dc=`${ECHO} "${dcstmp}" | cut -f1 -d','` dcstmp=`${ECHO} "${dcstmp}" | cut -f2- -d','` continue fi # Determine the objectclass for the entry. get_objectclass $dk2 OBJ_Name=${_ATTR_NAME} if [ "${OBJ_Name}" = "" ]; then ${ECHO} "Cannot determine objectclass for $dk2" ${ECHO} "Please create ${dk2}=${dc2},$lastdc entry and rerun idsconfig" exit 1 fi # Add the new container. ( cat <<EOF dn: ${dk2}=${dc2},$lastdc ${dk2}: $dc2 objectClass: top objectClass: ${OBJ_Name} EOF ) > ${TMPDIR}/base_objects # Set the $lastdc to new dc. lastdc="${dk2}=${dc2},$lastdc" # Add the entry. ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/base_objects ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: update of base objects ${dc} failed." cleanup exit 1 fi # Display message that schema is updated. ${ECHO} " ${STEP}. Created DN component ${dc}." STEP=`expr $STEP + 1` # Process next component. dc=`${ECHO} "${dcstmp}" | cut -f1 -d','` dcstmp=`${ECHO} "${dcstmp}" | cut -f2- -d','` done fi } # # add_new_containers(): Add the top level classes. # # $1 = Base DN # add_new_containers() { [ $DEBUG -eq 1 ] && ${ECHO} "In add_new_containers()" for ou in people group rpc protocols networks netgroup \ aliases hosts services ethers profile printers projects \ SolarisAuthAttr SolarisProfAttr Timezone ipTnet ; do # Check if nismaps already exist. eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"ou=${ou},${LDAP_BASEDN}\" -s base \"objectclass=*\" ${VERB}" if [ $? -eq 0 ]; then continue fi # Create TMP file to add. ( cat <<EOF dn: ou=${ou},${LDAP_BASEDN} ou: ${ou} objectClass: top objectClass: organizationalUnit EOF ) > ${TMPDIR}/toplevel.${ou} # Add the entry. ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/toplevel.${ou} ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: Add of ou=${ou} container failed!" cleanup exit 1 fi done # Display message that top level OU containers complete. ${ECHO} " ${STEP}. Top level \"ou\" containers complete." STEP=`expr $STEP + 1` } # # add_auto_maps(): Add the automount map entries. # # auto_home, auto_direct, auto_master, auto_shared # add_auto_maps() { [ $DEBUG -eq 1 ] && ${ECHO} "In add_auto_maps()" # Set AUTO_MAPS for maps to create. AUTO_MAPS="auto_home auto_direct auto_master auto_shared" for automap in $AUTO_MAPS; do # Check if automaps already exist. eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"automountMapName=${automap},${LDAP_BASEDN}\" -s base \"objectclass=*\" ${VERB}" if [ $? -eq 0 ]; then continue fi # Create the tmp file to add. ( cat <<EOF dn: automountMapName=${automap},${LDAP_BASEDN} automountMapName: ${automap} objectClass: top objectClass: automountMap EOF ) > ${TMPDIR}/automap.${automap} # Add the entry. ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/automap.${automap} ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: Add of automap ${automap} failed!" cleanup exit 1 fi done # Display message that automount entries are updated. ${ECHO} " ${STEP}. automount maps: $AUTO_MAPS processed." STEP=`expr $STEP + 1` } # # add_proxyagent(): Add entry for nameservice to use to access server. # add_proxyagent() { [ $DEBUG -eq 1 ] && ${ECHO} "In add_proxyagent()" # Check if nismaps already exist. eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_PROXYAGENT}\" -s base \"objectclass=*\" ${VERB}" if [ $? -eq 0 ]; then ${ECHO} " ${STEP}. Proxy Agent ${LDAP_PROXYAGENT} already exists." STEP=`expr $STEP + 1` return 0 fi # Get cn and sn names from LDAP_PROXYAGENT. cn_tmp=`${ECHO} ${LDAP_PROXYAGENT} | cut -f1 -d, | cut -f2 -d=` # Create the tmp file to add. ( cat <<EOF dn: ${LDAP_PROXYAGENT} cn: ${cn_tmp} sn: ${cn_tmp} objectclass: top objectclass: person userpassword: ${LDAP_PROXYAGENT_CRED} EOF ) > ${TMPDIR}/proxyagent # Add the entry. ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/proxyagent ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: Adding proxyagent failed!" cleanup exit 1 fi # Display message that schema is updated. ${ECHO} " ${STEP}. Proxy Agent ${LDAP_PROXYAGENT} added." STEP=`expr $STEP + 1` } # # allow_proxy_read_pw(): Give Proxy Agent read permission for password. # allow_proxy_read_pw() { [ $DEBUG -eq 1 ] && ${ECHO} "In allow_proxy_read_pw()" # Set ACI Name PROXY_ACI_NAME="LDAP_Naming_Services_proxy_password_read" # Search for ACI_NAME eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base objectclass=* aci > ${TMPDIR}/chk_proxyread_aci 2>&1" ${GREP} "${PROXY_ACI_NAME}" ${TMPDIR}/chk_proxyread_aci > /dev/null 2>&1 if [ $? -eq 0 ]; then ${ECHO} " ${STEP}. Proxy ACI ${PROXY_ACI_NAME=} already exists for ${LDAP_BASEDN}." STEP=`expr $STEP + 1` return 0 fi # Create the tmp file to add. ( cat <<EOF dn: ${LDAP_BASEDN} changetype: modify add: aci aci: (target="ldap:///${LDAP_BASEDN}")(targetattr="userPassword")(version 3.0; acl ${PROXY_ACI_NAME}; allow (compare,read,search) userdn = "ldap:///${LDAP_PROXYAGENT}";) EOF ) > ${TMPDIR}/proxy_read # Add the entry. ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/proxy_read ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: Allow ${LDAP_PROXYAGENT} to read password failed!" cleanup exit 1 fi # Display message that schema is updated. ${ECHO} " ${STEP}. Give ${LDAP_PROXYAGENT} read permission for password." STEP=`expr $STEP + 1` } # # add_profile(): Add client profile to server. # add_profile() { [ $DEBUG -eq 1 ] && ${ECHO} "In add_profile()" # If profile name already exists, DELETE it, and add new one. eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${LDAP_PROFILE_NAME},ou=profile,${LDAP_BASEDN}\" -s base \"objectclass=*\" ${VERB}" if [ $? -eq 0 ]; then # Create Delete file. ( cat <<EOF cn=${LDAP_PROFILE_NAME},ou=profile,${LDAP_BASEDN} EOF ) > ${TMPDIR}/del_profile # Check if DEL_OLD_PROFILE is set. (If not ERROR) if [ $DEL_OLD_PROFILE -eq 0 ]; then ${ECHO} "ERROR: Profile name ${LDAP_PROFILE_NAME} exists! Add failed!" exit 1 fi # Delete the OLD profile. ${EVAL} "${LDAPDELETE} ${LDAP_ARGS} -f ${TMPDIR}/del_profile ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: Attempt to DELETE profile failed!" cleanup exit 1 fi fi # Build the "ldapclient genprofile" command string to execute. GEN_CMD="ldapclient genprofile -a \"profileName=${LDAP_PROFILE_NAME}\"" # Add required argument defaultSearchBase. GEN_CMD="${GEN_CMD} -a \"defaultSearchBase=${LDAP_BASEDN}\"" # Add optional parameters. [ -n "$LDAP_SERVER_LIST" ] && \ GEN_CMD="${GEN_CMD} -a \"defaultServerList=${LDAP_SERVER_LIST}\"" [ -n "$LDAP_SEARCH_SCOPE" ] && \ GEN_CMD="${GEN_CMD} -a \"defaultSearchScope=${LDAP_SEARCH_SCOPE}\"" [ -n "$LDAP_CRED_LEVEL" ] && \ GEN_CMD="${GEN_CMD} -a \"credentialLevel=${LDAP_CRED_LEVEL}\"" [ -n "$LDAP_AUTHMETHOD" ] && \ GEN_CMD="${GEN_CMD} -a \"authenticationMethod=${LDAP_AUTHMETHOD}\"" [ -n "$LDAP_FOLLOWREF" ] && \ GEN_CMD="${GEN_CMD} -a \"followReferrals=${LDAP_FOLLOWREF}\"" [ -n "$LDAP_SEARCH_TIME_LIMIT" ] && \ GEN_CMD="${GEN_CMD} -a \"searchTimeLimit=${LDAP_SEARCH_TIME_LIMIT}\"" [ -n "$LDAP_PROFILE_TTL" ] && \ GEN_CMD="${GEN_CMD} -a \"profileTTL=${LDAP_PROFILE_TTL}\"" [ -n "$LDAP_BIND_LIMIT" ] && \ GEN_CMD="${GEN_CMD} -a \"bindTimeLimit=${LDAP_BIND_LIMIT}\"" [ -n "$LDAP_PREF_SRVLIST" ] && \ GEN_CMD="${GEN_CMD} -a \"preferredServerList=${LDAP_PREF_SRVLIST}\"" [ -n "$LDAP_SRV_AUTHMETHOD_PAM" ] && \ GEN_CMD="${GEN_CMD} -a \"serviceAuthenticationMethod=${LDAP_SRV_AUTHMETHOD_PAM}\"" [ -n "$LDAP_SRV_AUTHMETHOD_KEY" ] && \ GEN_CMD="${GEN_CMD} -a \"serviceAuthenticationMethod=${LDAP_SRV_AUTHMETHOD_KEY}\"" [ -n "$LDAP_SRV_AUTHMETHOD_CMD" ] && \ GEN_CMD="${GEN_CMD} -a \"serviceAuthenticationMethod=${LDAP_SRV_AUTHMETHOD_CMD}\"" # Check if there are any service search descriptors to ad. if [ -s "${SSD_FILE}" ]; then ssd_2_profile fi # Execute "ldapclient genprofile" to create profile. eval ${GEN_CMD} > ${TMPDIR}/gen_profile 2> ${TMPDIR}/gen_profile_ERR if [ $? -ne 0 ]; then ${ECHO} " ERROR: ldapclient genprofile failed!" cleanup exit 1 fi # Add the generated profile.. ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/gen_profile ${VERB}" if [ $? -ne 0 ]; then ${ECHO} " ERROR: Attempt to add profile failed!" cleanup exit 1 fi # Display message that schema is updated. ${ECHO} " ${STEP}. Generated client profile and loaded on server." STEP=`expr $STEP + 1` } # # cleanup(): Remove the TMPDIR and all files in it. # cleanup() { [ $DEBUG -eq 1 ] && ${ECHO} "In cleanup()" rm -fr ${TMPDIR} } # # * * * MAIN * * * # # Description: # This script assumes that the iPlanet Directory Server (iDS) is # installed and that setup has been run. This script takes the # iDS server from that point and sets up the infrastructure for # LDAP Naming Services. After running this script, ldapaddent(1M) # or some other tools can be used to populate data. # Initialize the variables that need to be set to NULL, or some # other initial value before the rest of the functions can be called. init # Parse command line arguments. parse_arg $* shift $? # Print extra line to separate from prompt. ${ECHO} " " # Either Load the user specified config file # or prompt user for config info. if [ -n "$INPUT_FILE" ] then load_config_file INTERACTIVE=0 # Turns off prompts that occur later. validate_info # Validate basic info in file. chk_ids_version # Check iDS version for compatibility. gssapi_setup_auto else # Display BACKUP warning to user. display_msg backup_server get_confirm "Do you wish to continue with server setup (y/n/h)?" "n" "backup_help" if [ $? -eq 0 ]; then # if No, cleanup and exit. cleanup ; exit 1 fi # Prompt for values. prompt_config_info display_summary # Allow user to modify results. INTERACTIVE=1 # Insures future prompting. fi # Modify slapd.oc.conf to ALLOW cn instead of REQUIRE. modify_cn # Modify timelimit to user value. [ $NEED_TIME -eq 1 ] && modify_timelimit # Modify sizelimit to user value. [ $NEED_SIZE -eq 1 ] && modify_sizelimit # Modify the password storage scheme to support CRYPT. if [ "$NEED_CRYPT" = "TRUE" ]; then modify_pwd_crypt fi # Update the schema (Attributes, Objectclass Definitions) if [ ${SCHEMA_UPDATED} -eq 0 ]; then update_schema_attr update_schema_obj fi # Add suffix together with its root entry (if needed) add_suffix || { cleanup exit 1 } # Add base objects (if needed) add_base_objects # Update the NisDomainObject. # The Base DN might of just been created, so this MUST happen after # the base objects have been added! set_nisdomain # Add top level classes (new containers) add_new_containers # Add common nismaps. add_auto_maps # Modify top ACI. modify_top_aci # Add Access Control Information for VLV. add_vlv_aci # if Proxy needed, Add Proxy Agent and give read permission for password. if [ $NEED_PROXY -eq 1 ]; then add_proxyagent allow_proxy_read_pw fi # Generate client profile and add it to the server. add_profile # Add Indexes to improve Search Performance. add_eq_indexes add_sub_indexes add_vlv_indexes # Display setup complete message display_msg setup_complete # Display VLV index commands to be executed on server. display_vlv_cmds # Create config file if requested. [ -n "$OUTPUT_FILE" ] && create_config_file # Removed the TMPDIR and all files in it. cleanup exit 0 # end of MAIN.