/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. * * BOUND state of the DHCP client state machine. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "states.h" #include "packet.h" #include "util.h" #include "agent.h" #include "interface.h" #include "script_handler.h" /* * Possible outcomes for IPv6 binding attempt. */ enum v6_bind_result { v6Restart, /* report failure and restart state machine */ v6Resent, /* new Request message has been sent */ v6Done /* successful binding */ }; static enum v6_bind_result configure_v6_leases(dhcp_smach_t *); static boolean_t configure_v4_lease(dhcp_smach_t *); static boolean_t configure_v4_timers(dhcp_smach_t *); /* * bound_event_cb(): callback for script_start on the event EVENT_BOUND * * input: dhcp_smach_t *: the state machine configured * void *: unused * output: int: always 1 */ /* ARGSUSED1 */ static int bound_event_cb(dhcp_smach_t *dsmp, void *arg) { if (dsmp->dsm_ia.ia_fd != -1) ipc_action_finish(dsmp, DHCP_IPC_SUCCESS); else async_finish(dsmp); return (1); } /* * dhcp_bound(): configures an state machine and interfaces using information * contained in the ACK/Reply packet and sets up lease timers. * Before starting, the requested address is verified by * Duplicate Address Detection to make sure it's not in use. * * input: dhcp_smach_t *: the state machine to move to bound * PKT_LIST *: the ACK/Reply packet, or NULL to use dsmp->dsm_ack * output: boolean_t: B_TRUE on success, B_FALSE on failure */ boolean_t dhcp_bound(dhcp_smach_t *dsmp, PKT_LIST *ack) { DHCPSTATE oldstate; lease_t new_lease; dhcp_lif_t *lif; dhcp_lease_t *dlp; enum v6_bind_result v6b; if (ack != NULL) { /* If ack we're replacing is not the original, then free it */ if (dsmp->dsm_ack != dsmp->dsm_orig_ack) free_pkt_entry(dsmp->dsm_ack); dsmp->dsm_ack = ack; /* Save the first ack as the original */ if (dsmp->dsm_orig_ack == NULL) dsmp->dsm_orig_ack = ack; } oldstate = dsmp->dsm_state; switch (oldstate) { case ADOPTING: /* Note that adoption occurs only for IPv4 DHCP. */ /* Ignore BOOTP */ if (ack->opts[CD_DHCP_TYPE] == NULL) return (B_FALSE); /* * if we're adopting a lease, the lease timers * only provide an upper bound since we don't know * from what time they are relative to. assume we * have a lease time of at most DHCP_ADOPT_LEASE_MAX. */ (void) memcpy(&new_lease, ack->opts[CD_LEASE_TIME]->value, sizeof (lease_t)); new_lease = htonl(MIN(ntohl(new_lease), DHCP_ADOPT_LEASE_MAX)); (void) memcpy(ack->opts[CD_LEASE_TIME]->value, &new_lease, sizeof (lease_t)); /* * we have no idea when the REQUEST that generated * this ACK was sent, but for diagnostic purposes * we'll assume its close to the current time. */ dsmp->dsm_newstart_monosec = monosec(); if (dsmp->dsm_isv6) { if ((v6b = configure_v6_leases(dsmp)) != v6Done) return (v6b == v6Resent); } else { if (!configure_v4_lease(dsmp)) return (B_FALSE); if (!configure_v4_timers(dsmp)) return (B_FALSE); } dsmp->dsm_curstart_monosec = dsmp->dsm_newstart_monosec; break; case SELECTING: case REQUESTING: case INIT_REBOOT: if (dsmp->dsm_isv6) { if ((v6b = configure_v6_leases(dsmp)) != v6Done) return (v6b == v6Resent); } else { if (!configure_v4_lease(dsmp)) return (B_FALSE); if (!configure_v4_timers(dsmp)) return (B_FALSE); if (!clear_lif_deprecated(dsmp->dsm_lif)) return (B_FALSE); } /* Stop sending requests now */ stop_pkt_retransmission(dsmp); /* * If we didn't end up with any usable leases, then we have a * problem. */ if (dsmp->dsm_leases == NULL) { dhcpmsg(MSG_WARNING, "dhcp_bound: no address lease established"); return (B_FALSE); } /* * If this is a Rapid-Commit (selecting state) or if we're * dealing with a reboot (init-reboot), then we will have a new * server ID to save. */ if (ack != NULL && (oldstate == SELECTING || oldstate == INIT_REBOOT) && dsmp->dsm_isv6 && !save_server_id(dsmp, ack)) { dhcpmsg(MSG_ERROR, "dhcp_bound: unable to save server ID on %s", dsmp->dsm_name); return (B_FALSE); } /* * We will continue configuring the interfaces via * dhcp_bound_complete, once kernel DAD completes. If no new * leases were created (which can happen on an init-reboot used * for link-up confirmation), then go straight to bound state. */ if (!set_smach_state(dsmp, PRE_BOUND)) return (B_FALSE); if (dsmp->dsm_lif_wait == 0) dhcp_bound_complete(dsmp); break; case PRE_BOUND: case BOUND: case INFORMATION: /* This is just a duplicate ack; silently ignore it */ return (B_TRUE); case RENEWING: case REBINDING: if (dsmp->dsm_isv6) { if ((v6b = configure_v6_leases(dsmp)) != v6Done) return (v6b == v6Resent); } else { if (!configure_v4_timers(dsmp)) return (B_FALSE); if (!clear_lif_deprecated(dsmp->dsm_lif)) return (B_FALSE); } /* * If some or all of the leases were torn down by the server, * then handle that as an expiry. When the script is done * running for the LOSS6 event, we'll end up back here. */ if ((lif = find_expired_lif(dsmp)) != NULL) { hold_lif(lif); dhcp_expire(NULL, lif); while ((lif = find_expired_lif(dsmp)) != NULL) { dlp = lif->lif_lease; unplumb_lif(lif); if (dlp->dl_nlifs == 0) remove_lease(dlp); } if (dsmp->dsm_leases == NULL) return (B_FALSE); } if (oldstate == REBINDING && dsmp->dsm_isv6 && !save_server_id(dsmp, ack)) { return (B_FALSE); } /* * Handle Renew/Rebind that fails to address one of our leases. * (Should just never happen, but RFC 3315 section 18.1.8 * requires it, and TAHI tests for it.) */ for (dlp = dsmp->dsm_leases; dlp != NULL; dlp = dlp->dl_next) { if (dlp->dl_stale && dlp->dl_nlifs > 0) break; } if (dlp != NULL) { dhcpmsg(MSG_DEBUG, "dhcp_bound: lease not updated; " "allow retransmit"); return (B_TRUE); } if (!set_smach_state(dsmp, BOUND)) return (B_FALSE); (void) script_start(dsmp, dsmp->dsm_isv6 ? EVENT_EXTEND6 : EVENT_EXTEND, bound_event_cb, NULL, NULL); dsmp->dsm_curstart_monosec = dsmp->dsm_newstart_monosec; /* Stop sending requests now */ stop_pkt_retransmission(dsmp); break; case INFORM_SENT: if (dsmp->dsm_isv6 && !save_server_id(dsmp, ack)) { return (B_FALSE); } (void) bound_event_cb(dsmp, NULL); if (!set_smach_state(dsmp, INFORMATION)) return (B_FALSE); /* Stop sending requests now */ stop_pkt_retransmission(dsmp); break; default: /* something is really bizarre... */ dhcpmsg(MSG_DEBUG, "dhcp_bound: called in unexpected state: %s", dhcp_state_to_string(dsmp->dsm_state)); return (B_FALSE); } /* * remove any stale hostconf file that might be lying around for * this state machine. (in general, it's harmless, since we'll write a * fresh one when we exit anyway, but just to reduce confusion..) */ (void) remove_hostconf(dsmp->dsm_name, dsmp->dsm_isv6); return (B_TRUE); } /* * dhcp_bound_complete(): complete interface configuration after DAD * * input: dhcp_smach_t *: the state machine now ready * output: none */ void dhcp_bound_complete(dhcp_smach_t *dsmp) { PKT_LIST *ack; DHCP_OPT *router_list; int i; DHCPSTATE oldstate; dhcp_lif_t *lif; /* * Do bound state entry processing only if running IPv4. There's no * need for this with DHCPv6 because link-locals are used for I/O and * because DHCPv6 isn't entangled with routing. */ if (dsmp->dsm_isv6) { (void) set_smach_state(dsmp, BOUND); dhcpmsg(MSG_DEBUG, "dhcp_bound_complete: bound %s", dsmp->dsm_name); (void) script_start(dsmp, EVENT_BOUND6, bound_event_cb, NULL, NULL); dsmp->dsm_curstart_monosec = dsmp->dsm_newstart_monosec; return; } /* * Add each provided router; we'll clean them up when the * state machine goes away or when our lease expires. * * Note that we do not handle default routers on IPv4 logicals; * see README for details. */ ack = dsmp->dsm_ack; router_list = ack->opts[CD_ROUTER]; lif = dsmp->dsm_lif; if (router_list != NULL && (router_list->len % sizeof (ipaddr_t)) == 0 && strchr(lif->lif_name, ':') == NULL && !lif->lif_pif->pif_under_ipmp) { dsmp->dsm_nrouters = router_list->len / sizeof (ipaddr_t); dsmp->dsm_routers = malloc(router_list->len); if (dsmp->dsm_routers == NULL) { dhcpmsg(MSG_ERR, "dhcp_bound_complete: cannot allocate " "default router list, ignoring default routers"); dsmp->dsm_nrouters = 0; } for (i = 0; i < dsmp->dsm_nrouters; i++) { (void) memcpy(&dsmp->dsm_routers[i].s_addr, router_list->value + (i * sizeof (ipaddr_t)), sizeof (ipaddr_t)); if (!add_default_route(lif->lif_pif->pif_index, &dsmp->dsm_routers[i])) { dhcpmsg(MSG_ERR, "dhcp_bound_complete: cannot " "add default router %s on %s", inet_ntoa( dsmp->dsm_routers[i]), dsmp->dsm_name); dsmp->dsm_routers[i].s_addr = htonl(INADDR_ANY); continue; } dhcpmsg(MSG_INFO, "added default router %s on %s", inet_ntoa(dsmp->dsm_routers[i]), dsmp->dsm_name); } } oldstate = dsmp->dsm_state; if (!set_smach_state(dsmp, BOUND)) { dhcpmsg(MSG_ERR, "dhcp_bound_complete: cannot set bound state on %s", dsmp->dsm_name); return; } dhcpmsg(MSG_DEBUG, "dhcp_bound_complete: bound %s", dsmp->dsm_name); /* * We're now committed to this binding, so if it came from BOOTP, set * the flag. */ if (ack->opts[CD_DHCP_TYPE] == NULL) dsmp->dsm_dflags |= DHCP_IF_BOOTP; /* * If the previous state was ADOPTING, event loop has not been started * at this time; so don't run the EVENT_BOUND script. */ if (oldstate != ADOPTING) { (void) script_start(dsmp, EVENT_BOUND, bound_event_cb, NULL, NULL); } dsmp->dsm_curstart_monosec = dsmp->dsm_newstart_monosec; } /* * fuzzify(): adds some "fuzz" to a t1/t2 time, in accordance with RFC2131. * We use up to plus or minus 2% jitter in the time. This is a * small value, but the timers involved are typically long. A * common T1 value is one day, and the fuzz is up to 28.8 minutes; * plenty of time to make sure that individual clients don't renew * all at the same time. * * input: uint32_t: the number of seconds until lease expiration * double: the approximate percentage of that time to return * output: double: a number approximating (sec * pct) */ static double fuzzify(uint32_t sec, double pct) { return (sec * (pct + (drand48() - 0.5) / 25.0)); } /* * get_pkt_times(): pulls the lease times out of a v4 DHCP packet and stores * them as host byte-order relative times in the passed in * parameters. * * input: PKT_LIST *: the packet to pull the packet times from * lease_t *: where to store the relative lease time in hbo * lease_t *: where to store the relative t1 time in hbo * lease_t *: where to store the relative t2 time in hbo * output: void */ static void get_pkt_times(PKT_LIST *ack, lease_t *lease, lease_t *t1, lease_t *t2) { *lease = DHCP_PERM; *t1 = DHCP_PERM; *t2 = DHCP_PERM; if (ack->opts[CD_DHCP_TYPE] == NULL) { dhcpmsg(MSG_VERBOSE, "get_pkt_times: BOOTP response; infinite lease"); return; } if (ack->opts[CD_LEASE_TIME] == NULL) { dhcpmsg(MSG_VERBOSE, "get_pkt_times: no lease option provided"); return; } if (ack->opts[CD_LEASE_TIME]->len != sizeof (lease_t)) { dhcpmsg(MSG_VERBOSE, "get_pkt_times: invalid lease option"); } (void) memcpy(lease, ack->opts[CD_LEASE_TIME]->value, sizeof (lease_t)); *lease = ntohl(*lease); if (*lease == DHCP_PERM) { dhcpmsg(MSG_VERBOSE, "get_pkt_times: infinite lease granted"); return; } if (ack->opts[CD_T1_TIME] != NULL && ack->opts[CD_T1_TIME]->len == sizeof (lease_t)) { (void) memcpy(t1, ack->opts[CD_T1_TIME]->value, sizeof (*t1)); *t1 = ntohl(*t1); } if (ack->opts[CD_T2_TIME] != NULL && ack->opts[CD_T2_TIME]->len == sizeof (lease_t)) { (void) memcpy(t2, ack->opts[CD_T2_TIME]->value, sizeof (*t2)); *t2 = ntohl(*t2); } if ((*t1 == DHCP_PERM) || (*t1 >= *lease)) *t1 = (lease_t)fuzzify(*lease, DHCP_T1_FACT); if ((*t2 == DHCP_PERM) || (*t2 > *lease) || (*t2 <= *t1)) *t2 = (lease_t)fuzzify(*lease, DHCP_T2_FACT); dhcpmsg(MSG_VERBOSE, "get_pkt_times: lease %u t1 %u t2 %u", *lease, *t1, *t2); } /* * configure_v4_timers(): configures the lease timers on a v4 state machine * * input: dhcp_smach_t *: the state machine to configure * output: boolean_t: B_TRUE on success, B_FALSE on failure */ static boolean_t configure_v4_timers(dhcp_smach_t *dsmp) { PKT_LIST *ack = dsmp->dsm_ack; lease_t lease, t1, t2; dhcp_lease_t *dlp; dhcp_lif_t *lif; /* v4 has just one lease per state machine, and one LIF */ dlp = dsmp->dsm_leases; lif = dlp->dl_lifs; /* * If it's DHCP, but there's no valid lease time, then complain, * decline the lease and return error. */ if (ack->opts[CD_DHCP_TYPE] != NULL && (ack->opts[CD_LEASE_TIME] == NULL || ack->opts[CD_LEASE_TIME]->len != sizeof (lease_t))) { lif_mark_decline(lif, "Missing or corrupted lease time"); send_declines(dsmp); dhcpmsg(MSG_WARNING, "configure_v4_timers: %s lease time in " "ACK on %s", ack->opts[CD_LEASE_TIME] == NULL ? "missing" : "corrupt", dsmp->dsm_name); return (B_FALSE); } /* Stop the T1 and T2 timers */ cancel_lease_timers(dlp); /* Stop the LEASE timer */ cancel_lif_timers(lif); /* * type has already been verified as ACK. if type is not set, * then we got a BOOTP packet. we now fetch the t1, t2, and * lease options out of the packet into variables. they are * returned as relative host-byte-ordered times. */ get_pkt_times(ack, &lease, &t1, &t2); /* * if the current lease is mysteriously close to the new * lease, warn the user. unless there's less than a minute * left, round to the closest minute. */ if (lif->lif_expire.dt_start != 0 && abs((dsmp->dsm_newstart_monosec + lease) - (dsmp->dsm_curstart_monosec + lif->lif_expire.dt_start)) < DHCP_LEASE_EPS) { const char *noext = "configure_v4_timers: lease renewed but " "time not extended"; int msg_level; uint_t minleft; if (lif->lif_expire.dt_start < DHCP_LEASE_ERROR_THRESH) msg_level = MSG_ERROR; else msg_level = MSG_VERBOSE; minleft = (lif->lif_expire.dt_start + 30) / 60; if (lif->lif_expire.dt_start < 60) { dhcpmsg(msg_level, "%s; expires in %d seconds", noext, lif->lif_expire.dt_start); } else if (minleft == 1) { dhcpmsg(msg_level, "%s; expires in 1 minute", noext); } else if (minleft > 120) { dhcpmsg(msg_level, "%s; expires in %d hours", noext, (minleft + 30) / 60); } else { dhcpmsg(msg_level, "%s; expires in %d minutes", noext, minleft); } } init_timer(&dlp->dl_t1, t1); init_timer(&dlp->dl_t2, t2); init_timer(&lif->lif_expire, lease); if (lease == DHCP_PERM) { dhcpmsg(MSG_INFO, "configure_v4_timers: %s acquired permanent lease", dsmp->dsm_name); return (B_TRUE); } dhcpmsg(MSG_INFO, "configure_v4_timers: %s acquired lease, expires %s", dsmp->dsm_name, monosec_to_string(dsmp->dsm_newstart_monosec + lease)); dhcpmsg(MSG_INFO, "configure_v4_timers: %s begins renewal at %s", dsmp->dsm_name, monosec_to_string(dsmp->dsm_newstart_monosec + dlp->dl_t1.dt_start)); dhcpmsg(MSG_INFO, "configure_v4_timers: %s begins rebinding at %s", dsmp->dsm_name, monosec_to_string(dsmp->dsm_newstart_monosec + dlp->dl_t2.dt_start)); /* * according to RFC2131, there is no minimum lease time, but don't * set up renew/rebind timers if lease is shorter than DHCP_REBIND_MIN. */ if (!schedule_lif_timer(lif, &lif->lif_expire, dhcp_expire)) goto failure; if (lease < DHCP_REBIND_MIN) { dhcpmsg(MSG_WARNING, "configure_v4_timers: lease on %s is for " "less than %d seconds!", dsmp->dsm_name, DHCP_REBIND_MIN); return (B_TRUE); } if (!schedule_lease_timer(dlp, &dlp->dl_t1, dhcp_renew)) goto failure; if (!schedule_lease_timer(dlp, &dlp->dl_t2, dhcp_rebind)) goto failure; return (B_TRUE); failure: cancel_lease_timers(dlp); cancel_lif_timers(lif); dhcpmsg(MSG_WARNING, "configure_v4_timers: cannot schedule lease timers"); return (B_FALSE); } /* * configure_v6_leases(): configures the IPv6 leases on a state machine from * the current DHCPv6 ACK. We need to scan the ACK, * create a lease for each IA_NA, and a new LIF for each * IAADDR. * * input: dhcp_smach_t *: the machine to configure (with a valid dsm_ack) * output: enum v6_bind_result: restart, resend, or done */ static enum v6_bind_result configure_v6_leases(dhcp_smach_t *dsmp) { const dhcpv6_option_t *d6o, *d6so, *d6sso; const char *optbase, *estr, *msg; uint_t olen, solen, ssolen, msglen; dhcpv6_ia_na_t d6in; dhcpv6_iaaddr_t d6ia; dhcp_lease_t *dlp; uint32_t shortest; dhcp_lif_t *lif; uint_t nlifs; boolean_t got_iana = B_FALSE; uint_t scode; for (dlp = dsmp->dsm_leases; dlp != NULL; dlp = dlp->dl_next) dlp->dl_stale = B_TRUE; d6o = NULL; while ((d6o = dhcpv6_pkt_option(dsmp->dsm_ack, d6o, DHCPV6_OPT_IA_NA, &olen)) != NULL) { if (olen < sizeof (d6in)) { dhcpmsg(MSG_WARNING, "configure_v6_leases: garbled IA_NA"); continue; } /* * Check the IAID. It should be for our controlling LIF. If a * single state machine needs to use multiple IAIDs, then this * will need to change. */ (void) memcpy(&d6in, d6o, sizeof (d6in)); d6in.d6in_iaid = ntohl(d6in.d6in_iaid); if (d6in.d6in_iaid != dsmp->dsm_lif->lif_iaid) { dhcpmsg(MSG_WARNING, "configure_v6_leases: ignored " "IA_NA for IAID %x (not %x)", d6in.d6in_iaid, dsmp->dsm_lif->lif_iaid); continue; } /* * See notes below; there's only one IA_NA and a single IAID * for now. */ if ((dlp = dsmp->dsm_leases) != NULL) dlp->dl_stale = B_FALSE; /* * Note that some bug-ridden servers will try to give us * multiple IA_NA options for a single IAID. We ignore * duplicates. */ if (got_iana) { dhcpmsg(MSG_WARNING, "configure_v6_leases: unexpected " "extra IA_NA ignored"); continue; } d6in.d6in_t1 = ntohl(d6in.d6in_t1); d6in.d6in_t2 = ntohl(d6in.d6in_t2); /* RFC 3315 required check for invalid T1/T2 combinations */ if (d6in.d6in_t1 > d6in.d6in_t2 && d6in.d6in_t2 != 0) { dhcpmsg(MSG_WARNING, "configure_v6_leases: ignored " "IA_NA with invalid T1 %u > T2 %u", d6in.d6in_t1, d6in.d6in_t2); continue; } /* * There may be a status code here. Process if present. */ optbase = (const char *)d6o + sizeof (d6in); olen -= sizeof (d6in); d6so = dhcpv6_find_option(optbase, olen, NULL, DHCPV6_OPT_STATUS_CODE, &solen); scode = dhcpv6_status_code(d6so, solen, &estr, &msg, &msglen); if (scode != DHCPV6_STAT_SUCCESS) { dhcpmsg(MSG_WARNING, "configure_v6_leases: IA_NA: %s: %.*s", estr, msglen, msg); } print_server_msg(dsmp, msg, msglen); /* * Other errors are possible here. According to RFC 3315 * section 18.1.8, we ignore the entire IA if it gives the "no * addresses" status code. We may try another server if we * like -- we instead opt to allow the addresses to expire and * then try a new server. * * If the status code is "no binding," then we must go back and * redo the Request. Surprisingly, it doesn't matter if it's * any other code. */ if (scode == DHCPV6_STAT_NOADDRS) { dhcpmsg(MSG_DEBUG, "configure_v6_leases: ignoring " "no-addrs status in IA_NA"); continue; } if (scode == DHCPV6_STAT_NOBINDING) { send_v6_request(dsmp); return (v6Resent); } /* * Find or create the lease structure. This part is simple, * because we support only IA_NA and a single IAID. This means * there's only one lease structure. The design supports * multiple lease structures so that IA_TA and IA_PD can be * added later. */ if ((dlp = dsmp->dsm_leases) == NULL && (dlp = insert_lease(dsmp)) == NULL) { dhcpmsg(MSG_ERROR, "configure_v6_leases: unable to " "allocate memory for lease"); return (v6Restart); } /* * Iterate over the IAADDR options contained within this IA_NA. */ shortest = DHCPV6_INFTIME; d6so = NULL; while ((d6so = dhcpv6_find_option(optbase, olen, d6so, DHCPV6_OPT_IAADDR, &solen)) != NULL) { if (solen < sizeof (d6ia)) { dhcpmsg(MSG_WARNING, "configure_v6_leases: garbled IAADDR"); continue; } (void) memcpy(&d6ia, d6so, sizeof (d6ia)); d6ia.d6ia_preflife = ntohl(d6ia.d6ia_preflife); d6ia.d6ia_vallife = ntohl(d6ia.d6ia_vallife); /* RFC 3315 required validity check */ if (d6ia.d6ia_preflife > d6ia.d6ia_vallife) { dhcpmsg(MSG_WARNING, "configure_v6_leases: ignored IAADDR with " "preferred lifetime %u > valid %u", d6ia.d6ia_preflife, d6ia.d6ia_vallife); continue; } /* * RFC 3315 allows a status code to be buried inside * the IAADDR option. Look for it, and process if * present. Process in a manner similar to that for * the IA itself; TAHI checks for this. Real servers * likely won't do this. */ d6sso = dhcpv6_find_option((const char *)d6so + sizeof (d6ia), solen - sizeof (d6ia), NULL, DHCPV6_OPT_STATUS_CODE, &ssolen); scode = dhcpv6_status_code(d6sso, ssolen, &estr, &msg, &msglen); print_server_msg(dsmp, msg, msglen); if (scode == DHCPV6_STAT_NOADDRS) { dhcpmsg(MSG_DEBUG, "configure_v6_leases: " "ignoring no-addrs status in IAADDR"); continue; } if (scode == DHCPV6_STAT_NOBINDING) { send_v6_request(dsmp); return (v6Resent); } if (scode != DHCPV6_STAT_SUCCESS) { dhcpmsg(MSG_WARNING, "configure_v6_leases: IAADDR: %s", estr); } /* * Locate the existing LIF within the lease associated * with this address, if any. */ lif = dlp->dl_lifs; for (nlifs = dlp->dl_nlifs; nlifs > 0; nlifs--, lif = lif->lif_next) { if (IN6_ARE_ADDR_EQUAL(&d6ia.d6ia_addr, &lif->lif_v6addr)) break; } /* * If the server has set the lifetime to zero, then * delete the LIF. Otherwise, set the new LIF expiry * time, adding the LIF if necessary. */ if (d6ia.d6ia_vallife == 0) { /* If it was found, then it's expired */ if (nlifs != 0) { dhcpmsg(MSG_DEBUG, "configure_v6_leases: lif %s has " "expired", lif->lif_name); lif->lif_expired = B_TRUE; } continue; } /* If it wasn't found, then create it now. */ if (nlifs == 0) { lif = plumb_lif(dsmp->dsm_lif->lif_pif, &d6ia.d6ia_addr); if (lif == NULL) continue; if (++dlp->dl_nlifs == 1) { dlp->dl_lifs = lif; } else { remque(lif); insque(lif, dlp->dl_lifs); } lif->lif_lease = dlp; lif->lif_dad_wait = _B_TRUE; dsmp->dsm_lif_wait++; } else { /* If it was found, cancel timer */ cancel_lif_timers(lif); if (d6ia.d6ia_preflife != 0 && !clear_lif_deprecated(lif)) { unplumb_lif(lif); continue; } } /* Set the new expiry timers */ init_timer(&lif->lif_preferred, d6ia.d6ia_preflife); init_timer(&lif->lif_expire, d6ia.d6ia_vallife); /* * If the preferred lifetime is over now, then the LIF * is deprecated. If it's the same as the expiry time, * then we don't need a separate timer for it. */ if (d6ia.d6ia_preflife == 0) { set_lif_deprecated(lif); } else if (d6ia.d6ia_preflife != DHCPV6_INFTIME && d6ia.d6ia_preflife != d6ia.d6ia_vallife && !schedule_lif_timer(lif, &lif->lif_preferred, dhcp_deprecate)) { unplumb_lif(lif); continue; } if (d6ia.d6ia_vallife != DHCPV6_INFTIME && !schedule_lif_timer(lif, &lif->lif_expire, dhcp_expire)) { unplumb_lif(lif); continue; } if (d6ia.d6ia_preflife < shortest) shortest = d6ia.d6ia_preflife; } if (dlp->dl_nlifs == 0) { dhcpmsg(MSG_WARNING, "configure_v6_leases: no IAADDRs found in IA_NA"); remove_lease(dlp); continue; } if (d6in.d6in_t1 == 0 && d6in.d6in_t2 == 0) { /* Default values from RFC 3315: 0.5 and 0.8 */ if ((d6in.d6in_t1 = shortest / 2) == 0) d6in.d6in_t1 = 1; d6in.d6in_t2 = shortest - shortest / 5; } cancel_lease_timers(dlp); init_timer(&dlp->dl_t1, d6in.d6in_t1); init_timer(&dlp->dl_t2, d6in.d6in_t2); if ((d6in.d6in_t1 != DHCPV6_INFTIME && !schedule_lease_timer(dlp, &dlp->dl_t1, dhcp_renew)) || (d6in.d6in_t2 != DHCPV6_INFTIME && !schedule_lease_timer(dlp, &dlp->dl_t2, dhcp_rebind))) { dhcpmsg(MSG_WARNING, "configure_v6_leases: unable to " "set renew/rebind timers"); } else { got_iana = B_TRUE; } } if (!got_iana) { dhcpmsg(MSG_WARNING, "configure_v6_leases: no usable IA_NA option found"); } return (v6Done); } /* * configure_v4_lease(): configures the IPv4 lease on a state machine from * the current DHCP ACK. There's only one lease and LIF * per state machine in IPv4. * * input: dhcp_smach_t *: the machine to configure (with a valid dsm_ack) * output: boolean_t: B_TRUE on success, B_FALSE on failure */ static boolean_t configure_v4_lease(dhcp_smach_t *dsmp) { struct lifreq lifr; struct sockaddr_in *sin; PKT_LIST *ack = dsmp->dsm_ack; dhcp_lease_t *dlp; dhcp_lif_t *lif; uint32_t addrhbo; struct in_addr inaddr; /* * if we're using DHCP, then we'll have a valid CD_SERVER_ID * (we checked in dhcp_acknak()); set it now so that * dsmp->dsm_server is valid in case we need to send_decline(). * note that we use comparisons against opts[CD_DHCP_TYPE] * since we haven't set DHCP_IF_BOOTP yet (we don't do that * until we're sure we want the offered address.) */ if (ack->opts[CD_DHCP_TYPE] != NULL) { (void) memcpy(&inaddr, ack->opts[CD_SERVER_ID]->value, sizeof (inaddr)); IN6_INADDR_TO_V4MAPPED(&inaddr, &dsmp->dsm_server); } /* * There needs to be exactly one lease for IPv4, and that lease * controls the main LIF for the state machine. If it doesn't exist * yet, then create it now. */ if ((dlp = dsmp->dsm_leases) == NULL && (dlp = insert_lease(dsmp)) == NULL) { dhcpmsg(MSG_ERROR, "configure_v4_lease: unable to allocate " "memory for lease"); return (B_FALSE); } if (dlp->dl_nlifs == 0) { dlp->dl_lifs = dsmp->dsm_lif; dlp->dl_nlifs = 1; /* The lease holds a reference on the LIF */ hold_lif(dlp->dl_lifs); dlp->dl_lifs->lif_lease = dlp; } lif = dlp->dl_lifs; IN6_INADDR_TO_V4MAPPED(&ack->pkt->yiaddr, &lif->lif_v6addr); addrhbo = ntohl(ack->pkt->yiaddr.s_addr); if ((addrhbo & IN_CLASSA_NET) == 0 || (addrhbo >> IN_CLASSA_NSHIFT) == IN_LOOPBACKNET || IN_CLASSD(addrhbo)) { dhcpmsg(MSG_ERROR, "configure_v4_lease: got invalid IP address %s for %s", inet_ntoa(ack->pkt->yiaddr), lif->lif_name); return (B_FALSE); } (void) memset(&lifr, 0, sizeof (struct lifreq)); (void) strlcpy(lifr.lifr_name, lif->lif_name, LIFNAMSIZ); /* * bring the interface online. note that there is no optimal * order here: it is considered bad taste (and in > solaris 7, * likely illegal) to bring an interface up before it has an * ip address. however, due to an apparent bug in sun fddi * 5.0, fddi will not obtain a network routing entry unless * the interface is brought up before it has an ip address. * we take the lesser of the two evils; if fddi customers have * problems, they can get a newer fddi distribution which * fixes the problem. */ sin = (struct sockaddr_in *)&lifr.lifr_addr; sin->sin_family = AF_INET; (void) memset(&lif->lif_v6mask, 0xff, sizeof (lif->lif_v6mask)); if (ack->opts[CD_SUBNETMASK] != NULL && ack->opts[CD_SUBNETMASK]->len == sizeof (inaddr)) { (void) memcpy(&inaddr, ack->opts[CD_SUBNETMASK]->value, sizeof (inaddr)); } else { if (ack->opts[CD_SUBNETMASK] != NULL && ack->opts[CD_SUBNETMASK]->len != sizeof (inaddr)) { dhcpmsg(MSG_WARNING, "configure_v4_lease: specified " "subnet mask length is %d instead of %d, ignoring", ack->opts[CD_SUBNETMASK]->len, sizeof (ipaddr_t)); } else { dhcpmsg(MSG_WARNING, "configure_v4_lease: no IP " "netmask specified for %s, making best guess", lif->lif_name); } /* * no legitimate IP subnet mask specified.. use best * guess. recall that lif_addr is in network order, so * imagine it's 0x11223344: then when it is read into * a register on x86, it becomes 0x44332211, so we * must ntohl() it to convert it to 0x11223344 in * order to use the macros in . */ if (IN_CLASSA(addrhbo)) inaddr.s_addr = htonl(IN_CLASSA_NET); else if (IN_CLASSB(addrhbo)) inaddr.s_addr = htonl(IN_CLASSB_NET); else if (IN_CLASSC(addrhbo)) inaddr.s_addr = htonl(IN_CLASSC_NET); else { /* * Cant be Class D as that is multicast * Must be Class E */ inaddr.s_addr = htonl(IN_CLASSE_NET); } } lif->lif_v6mask._S6_un._S6_u32[3] = inaddr.s_addr; sin->sin_addr = inaddr; dhcpmsg(MSG_INFO, "configure_v4_lease: setting IP netmask to %s on %s", inet_ntoa(sin->sin_addr), lif->lif_name); if (ioctl(v4_sock_fd, SIOCSLIFNETMASK, &lifr) == -1) { dhcpmsg(MSG_ERR, "configure_v4_lease: cannot set IP netmask " "on %s", lif->lif_name); return (B_FALSE); } IN6_V4MAPPED_TO_INADDR(&lif->lif_v6addr, &sin->sin_addr); dhcpmsg(MSG_INFO, "configure_v4_lease: setting IP address to %s on %s", inet_ntoa(sin->sin_addr), lif->lif_name); if (ioctl(v4_sock_fd, SIOCSLIFADDR, &lifr) == -1) { dhcpmsg(MSG_ERR, "configure_v4_lease: cannot set IP address " "on %s", lif->lif_name); return (B_FALSE); } lif->lif_dad_wait = B_TRUE; dsmp->dsm_lif_wait++; if (ack->opts[CD_BROADCASTADDR] != NULL && ack->opts[CD_BROADCASTADDR]->len == sizeof (inaddr)) { (void) memcpy(&inaddr, ack->opts[CD_BROADCASTADDR]->value, sizeof (inaddr)); } else { if (ack->opts[CD_BROADCASTADDR] != NULL && ack->opts[CD_BROADCASTADDR]->len != sizeof (inaddr)) { dhcpmsg(MSG_WARNING, "configure_v4_lease: specified " "broadcast address length is %d instead of %d, " "ignoring", ack->opts[CD_BROADCASTADDR]->len, sizeof (inaddr)); } else { dhcpmsg(MSG_WARNING, "configure_v4_lease: no IP " "broadcast specified for %s, making best guess", lif->lif_name); } /* * no legitimate IP broadcast specified. compute it * from the IP address and netmask. */ IN6_V4MAPPED_TO_INADDR(&lif->lif_v6addr, &inaddr); inaddr.s_addr |= ~lif->lif_v6mask._S6_un._S6_u32[3]; } /* * the kernel will set the broadcast address for us as part of * bringing the interface up. since experience has shown that dhcp * servers sometimes provide a bogus broadcast address, we let the * kernel set it so that it's guaranteed to be correct. * * also, note any inconsistencies and save the broadcast address the * kernel set so that we can watch for changes to it. */ if (ioctl(v4_sock_fd, SIOCGLIFBRDADDR, &lifr) == -1) { dhcpmsg(MSG_ERR, "configure_v4_lease: cannot get broadcast " "address for %s", lif->lif_name); return (B_FALSE); } if (inaddr.s_addr != sin->sin_addr.s_addr) { dhcpmsg(MSG_WARNING, "configure_v4_lease: incorrect broadcast " "address %s specified for %s; ignoring", inet_ntoa(inaddr), lif->lif_name); } lif->lif_broadcast = sin->sin_addr.s_addr; dhcpmsg(MSG_INFO, "configure_v4_lease: using broadcast address %s on %s", inet_ntoa(inaddr), lif->lif_name); return (B_TRUE); } /* * save_server_id(): save off the new DHCPv6 Server ID * * input: dhcp_smach_t *: the state machine to use * PKT_LIST *: the packet with the Reply message * output: boolean_t: B_TRUE on success, B_FALSE on failure */ boolean_t save_server_id(dhcp_smach_t *dsmp, PKT_LIST *msg) { const dhcpv6_option_t *d6o; uint_t olen; d6o = dhcpv6_pkt_option(msg, NULL, DHCPV6_OPT_SERVERID, &olen); if (d6o == NULL) return (B_FALSE); olen -= sizeof (*d6o); free(dsmp->dsm_serverid); if ((dsmp->dsm_serverid = malloc(olen)) == NULL) { return (B_FALSE); } else { dsmp->dsm_serveridlen = olen; (void) memcpy(dsmp->dsm_serverid, d6o + 1, olen); return (B_TRUE); } }