/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static unsigned int opl_cfg_inited; static opl_board_cfg_t opl_boards[HWD_SBS_PER_DOMAIN]; /* * Module control operations */ extern struct mod_ops mod_miscops; static struct modlmisc modlmisc = { &mod_miscops, /* Type of module */ "OPL opl_cfg %I%" }; static struct modlinkage modlinkage = { MODREV_1, (void *)&modlmisc, NULL }; static int opl_map_in(dev_info_t *, fco_handle_t, fc_ci_t *); static int opl_map_out(dev_info_t *, fco_handle_t, fc_ci_t *); static int opl_register_fetch(dev_info_t *, fco_handle_t, fc_ci_t *); static int opl_register_store(dev_info_t *, fco_handle_t, fc_ci_t *); static int opl_claim_memory(dev_info_t *, fco_handle_t, fc_ci_t *); static int opl_release_memory(dev_info_t *, fco_handle_t, fc_ci_t *); static int opl_vtop(dev_info_t *, fco_handle_t, fc_ci_t *); static int opl_config_child(dev_info_t *, fco_handle_t, fc_ci_t *); static int opl_get_fcode_size(dev_info_t *, fco_handle_t, fc_ci_t *); static int opl_get_fcode(dev_info_t *, fco_handle_t, fc_ci_t *); static int opl_map_phys(dev_info_t *, struct regspec *, caddr_t *, ddi_device_acc_attr_t *, ddi_acc_handle_t *); static void opl_unmap_phys(ddi_acc_handle_t *); static int opl_get_hwd_va(dev_info_t *, fco_handle_t, fc_ci_t *); static int opl_master_interrupt(dev_info_t *, fco_handle_t, fc_ci_t *); extern int prom_get_fcode_size(char *); extern int prom_get_fcode(char *, char *); static int master_interrupt_init(uint32_t, uint32_t); #define PROBE_STR_SIZE 64 #define UNIT_ADDR_SIZE 64 opl_fc_ops_t opl_fc_ops[] = { { FC_MAP_IN, opl_map_in}, { FC_MAP_OUT, opl_map_out}, { "rx@", opl_register_fetch}, { FC_RL_FETCH, opl_register_fetch}, { FC_RW_FETCH, opl_register_fetch}, { FC_RB_FETCH, opl_register_fetch}, { "rx!", opl_register_store}, { FC_RL_STORE, opl_register_store}, { FC_RW_STORE, opl_register_store}, { FC_RB_STORE, opl_register_store}, { "claim-memory", opl_claim_memory}, { "release-memory", opl_release_memory}, { "vtop", opl_vtop}, { FC_CONFIG_CHILD, opl_config_child}, { FC_GET_FCODE_SIZE, opl_get_fcode_size}, { FC_GET_FCODE, opl_get_fcode}, { "get-hwd-va", opl_get_hwd_va}, { "master-interrupt", opl_master_interrupt}, { NULL, NULL} }; extern caddr_t efcode_vaddr; extern int efcode_size; #ifdef DEBUG #define HWDDUMP_OFFSETS 1 #define HWDDUMP_ALL_STATUS 2 #define HWDDUMP_CHUNKS 3 #define HWDDUMP_SBP 4 int hwddump_flags = HWDDUMP_SBP | HWDDUMP_CHUNKS; #endif static int master_interrupt_inited = 0; int _init() { int err = 0; /* * Create a resource map for the contiguous memory allocated * at start-of-day in startup.c */ err = ndi_ra_map_setup(ddi_root_node(), "opl-fcodemem"); if (err == NDI_FAILURE) { cmn_err(CE_WARN, "Cannot setup resource map opl-fcodemem\n"); return (1); } /* * Put the allocated memory into the pool. */ (void) ndi_ra_free(ddi_root_node(), (uint64_t)efcode_vaddr, (uint64_t)efcode_size, "opl-fcodemem", 0); if ((err = mod_install(&modlinkage)) != 0) { cmn_err(CE_WARN, "opl_cfg failed to load, error=%d", err); (void) ndi_ra_map_destroy(ddi_root_node(), "opl-fcodemem"); } return (err); } int _fini(void) { int ret; ret = (mod_remove(&modlinkage)); if (ret != 0) return (ret); (void) ndi_ra_map_destroy(ddi_root_node(), "opl-fcodemem"); return (ret); } int _info(modinfop) struct modinfo *modinfop; { return (mod_info(&modlinkage, modinfop)); } #ifdef DEBUG static void opl_dump_hwd(opl_probe_t *probe) { hwd_header_t *hdrp; hwd_sb_status_t *statp; hwd_domain_info_t *dinfop; hwd_sb_t *sbp; hwd_cpu_chip_t *chips; hwd_pci_ch_t *channels; int board, i, status; board = probe->pr_board; hdrp = probe->pr_hdr; statp = probe->pr_sb_status; dinfop = probe->pr_dinfo; sbp = probe->pr_sb; printf("HWD: board %d\n", board); printf("HWD:magic = 0x%x\n", hdrp->hdr_magic); printf("HWD:version = 0x%x.%x\n", hdrp->hdr_version.major, hdrp->hdr_version.minor); if (hwddump_flags & HWDDUMP_OFFSETS) { printf("HWD:status offset = 0x%x\n", hdrp->hdr_sb_status_offset); printf("HWD:domain offset = 0x%x\n", hdrp->hdr_domain_info_offset); printf("HWD:board offset = 0x%x\n", hdrp->hdr_sb_info_offset); } if (hwddump_flags & HWDDUMP_SBP) printf("HWD:sb_t ptr = 0x%p\n", (void *)probe->pr_sb); if (hwddump_flags & HWDDUMP_ALL_STATUS) { int bd; printf("HWD:board status ="); for (bd = 0; bd < HWD_SBS_PER_DOMAIN; bd++) printf("%x ", statp->sb_status[bd]); printf("\n"); } else { printf("HWD:board status = %d\n", statp->sb_status[board]); } printf("HWD:banner name = %s\n", dinfop->dinf_banner_name); printf("HWD:platform = %s\n", dinfop->dinf_platform_token); printf("HWD:chip status:\n"); chips = &sbp->sb_cmu.cmu_cpu_chips[0]; for (i = 0; i < HWD_CPU_CHIPS_PER_CMU; i++) { status = chips[i].chip_status; printf("chip[%d] = ", i); if (HWD_STATUS_NONE(status)) printf("none"); else if (HWD_STATUS_FAILED(status)) printf("fail"); else if (HWD_STATUS_OK(status)) printf("ok"); printf("\n"); } if (hwddump_flags & HWDDUMP_CHUNKS) { int chunk; hwd_memory_t *mem = &sbp->sb_cmu.cmu_memory; printf("HWD:chunks:\n"); for (chunk = 0; chunk < HWD_MAX_MEM_CHUNKS; chunk++) printf("\t%d 0x%lx 0x%lx\n", chunk, mem->mem_chunks[chunk].chnk_start_address, mem->mem_chunks[chunk].chnk_size); } printf("HWD:channel status:\n"); channels = &sbp->sb_pci_ch[0]; for (i = 0; i < HWD_PCI_CHANNELS_PER_SB; i++) { status = channels[i].pci_status; printf("channels[%d] = ", i); if (HWD_STATUS_NONE(status)) printf("none"); else if (HWD_STATUS_FAILED(status)) printf("fail"); else if (HWD_STATUS_OK(status)) printf("ok"); printf("\n"); } printf("channels[%d] = ", i); status = sbp->sb_cmu.cmu_ch.chan_status; if (HWD_STATUS_NONE(status)) printf("none"); else if (HWD_STATUS_FAILED(status)) printf("fail"); else if (HWD_STATUS_OK(status)) printf("ok"); printf("\n"); } #endif /* DEBUG */ #ifdef UCTEST /* * For SesamI debugging, just map the SRAM directly to a kernel * VA and read it out from there */ #include #include /* * 0x4081F1323000LL is the HWD base address for LSB 0. But we need to map * at page boundaries. So, we use a base address of 0x4081F1322000LL. * Note that this has to match the HWD base pa set in .sesami-common-defs. * * The size specified for the HWD in the SCF spec is 36K. But since * we adjusted the base address by 4K, we need to use 40K for the * mapping size to cover the HWD. And 40K is also a multiple of the * base page size. */ #define OPL_HWD_BASE(lsb) \ (0x4081F1322000LL | (((uint64_t)(lsb)) << 40)) void *opl_hwd_vaddr; #endif /* UCTEST */ /* * Get the hardware descriptor from SCF. */ /*ARGSUSED*/ int opl_read_hwd(int board, hwd_header_t **hdrp, hwd_sb_status_t **statp, hwd_domain_info_t **dinfop, hwd_sb_t **sbp) { static int (*getinfop)(uint32_t, uint8_t, uint32_t, uint32_t *, void *) = NULL; void *hwdp; uint32_t key = KEY_ESCF; /* required value */ uint8_t type = 0x40; /* SUB_OS_RECEIVE_HWD */ uint32_t transid = board; uint32_t datasize = HWD_DATA_SIZE; hwd_header_t *hd; hwd_sb_status_t *st; hwd_domain_info_t *di; hwd_sb_t *sb; int ret; if (opl_boards[board].cfg_hwd == NULL) { #ifdef UCTEST /* * Just map the HWD in SRAM to a kernel VA */ size_t size; pfn_t pfn; size = 0xA000; opl_hwd_vaddr = vmem_alloc(heap_arena, size, VM_SLEEP); if (opl_hwd_vaddr == NULL) { cmn_err(CE_NOTE, "No space for HWD"); return (-1); } pfn = btop(OPL_HWD_BASE(board)); hat_devload(kas.a_hat, opl_hwd_vaddr, size, pfn, PROT_READ, HAT_LOAD_NOCONSIST | HAT_LOAD_LOCK); hwdp = (void *)((char *)opl_hwd_vaddr + 0x1000); opl_boards[board].cfg_hwd = hwdp; ret = 0; #else /* find the scf_service_getinfo() function */ if (getinfop == NULL) getinfop = (int (*)(uint32_t, uint8_t, uint32_t, uint32_t *, void *))modgetsymvalue("scf_service_getinfo", 0); if (getinfop == NULL) return (-1); /* allocate memory to receive the data */ hwdp = kmem_alloc(HWD_DATA_SIZE, KM_SLEEP); /* get the HWD */ ret = (*getinfop)(key, type, transid, &datasize, hwdp); if (ret == 0) opl_boards[board].cfg_hwd = hwdp; else kmem_free(hwdp, HWD_DATA_SIZE); #endif } else { hwdp = opl_boards[board].cfg_hwd; ret = 0; } /* copy the data to the destination */ if (ret == 0) { hd = (hwd_header_t *)hwdp; st = (hwd_sb_status_t *) ((char *)hwdp + hd->hdr_sb_status_offset); di = (hwd_domain_info_t *) ((char *)hwdp + hd->hdr_domain_info_offset); sb = (hwd_sb_t *) ((char *)hwdp + hd->hdr_sb_info_offset); if (hdrp != NULL) *hdrp = hd; if (statp != NULL) *statp = st; if (dinfop != NULL) *dinfop = di; if (sbp != NULL) *sbp = sb; } return (ret); } /* * The opl_probe_t probe structure is used to pass all sorts of parameters * to callback functions during probing. It also contains a snapshot of * the hardware descriptor that is taken at the beginning of a probe. */ static int opl_probe_init(opl_probe_t *probe) { hwd_header_t **hdrp; hwd_sb_status_t **statp; hwd_domain_info_t **dinfop; hwd_sb_t **sbp; int board, ret; board = probe->pr_board; hdrp = &probe->pr_hdr; statp = &probe->pr_sb_status; dinfop = &probe->pr_dinfo; sbp = &probe->pr_sb; /* * Read the hardware descriptor. */ ret = opl_read_hwd(board, hdrp, statp, dinfop, sbp); if (ret != 0) { cmn_err(CE_WARN, "IKP: failed to read HWD header"); return (-1); } #ifdef DEBUG opl_dump_hwd(probe); #endif return (0); } /* * This function is used to obtain pointers to relevant device nodes * which are created by Solaris at boot time. * * This function walks the child nodes of a given node, extracts * the "name" property, if it exists, and passes the node to a * callback init function. The callback determines if this node is * interesting or not. If it is, then a pointer to the node is * stored away by the callback for use during unprobe. * * The DDI get property function allocates storage for the name * property. That needs to be freed within this function. */ static int opl_init_nodes(dev_info_t *parent, opl_init_func_t init) { dev_info_t *node; char *name; int circ, ret; int len; ASSERT(parent != NULL); /* * Hold parent node busy to walk its child list */ ndi_devi_enter(parent, &circ); node = ddi_get_child(parent); while (node != NULL) { ret = OPL_GET_PROP(string, node, "name", &name, &len); if (ret != DDI_PROP_SUCCESS) { /* * The property does not exist for this node. */ node = ddi_get_next_sibling(node); continue; } ret = init(node, name, len); kmem_free(name, len); if (ret != 0) { ndi_devi_exit(parent, circ); return (-1); } node = ddi_get_next_sibling(node); } ndi_devi_exit(parent, circ); return (0); } /* * This init function finds all the interesting nodes under the * root node and stores pointers to them. The following nodes * are considered interesting by this implementation: * * "cmp" * These are nodes that represent processor chips. * * "pci" * These are nodes that represent PCI leaves. * * "pseudo-mc" * These are nodes that contain memory information. */ static int opl_init_root_nodes(dev_info_t *node, char *name, int len) { int portid, board, chip, channel, leaf; int ret; if (strncmp(name, OPL_CPU_CHIP_NODE, len) == 0) { ret = OPL_GET_PROP(int, node, "portid", &portid, -1); if (ret != DDI_PROP_SUCCESS) return (-1); ret = OPL_GET_PROP(int, node, "board#", &board, -1); if (ret != DDI_PROP_SUCCESS) return (-1); chip = OPL_CPU_CHIP(portid); opl_boards[board].cfg_cpu_chips[chip] = node; } else if (strncmp(name, OPL_PCI_LEAF_NODE, len) == 0) { ret = OPL_GET_PROP(int, node, "portid", &portid, -1); if (ret != DDI_PROP_SUCCESS) return (-1); board = OPL_IO_PORTID_TO_LSB(portid); channel = OPL_PORTID_TO_CHANNEL(portid); if (channel == OPL_CMU_CHANNEL) { opl_boards[board].cfg_cmuch_leaf = node; } else { leaf = OPL_PORTID_TO_LEAF(portid); opl_boards[board].cfg_pcich_leaf[channel][leaf] = node; } } else if (strncmp(name, OPL_PSEUDO_MC_NODE, len) == 0) { ret = OPL_GET_PROP(int, node, "board#", &board, -1); if (ret != DDI_PROP_SUCCESS) return (-1); ASSERT((board >= 0) && (board < HWD_SBS_PER_DOMAIN)); opl_boards[board].cfg_pseudo_mc = node; } return (0); } /* * This function initializes the OPL IKP feature. Currently, all it does * is find the interesting nodes that Solaris has created at boot time * for boards present at boot time and store pointers to them. This * is useful if those boards are unprobed by DR. */ int opl_init_cfg() { dev_info_t *root; if (opl_cfg_inited == 0) { root = ddi_root_node(); if ((opl_init_nodes(root, opl_init_root_nodes) != 0)) { cmn_err(CE_WARN, "IKP: init failed"); return (1); } opl_cfg_inited = 1; } return (0); } /* * When DR is initialized, we walk the device tree and acquire a hold on * all the nodes that are interesting to IKP. This is so that the corresponding * branches cannot be deleted. * * The following function informs the walk about which nodes are interesting * so that it can hold the corresponding branches. */ static int opl_hold_node(char *name) { /* * We only need to hold/release the following nodes which * represent separate branches that must be managed. */ return ((strcmp(name, OPL_CPU_CHIP_NODE) == 0) || (strcmp(name, OPL_PSEUDO_MC_NODE) == 0) || (strcmp(name, OPL_PCI_LEAF_NODE) == 0)); } static int opl_hold_rele_devtree(dev_info_t *rdip, void *arg) { int *holdp = (int *)arg; char *name = ddi_node_name(rdip); /* * We only need to hold/release the following nodes which * represent separate branches that must be managed. */ if (opl_hold_node(name) == 0) { /* Not of interest to us */ return (DDI_WALK_PRUNECHILD); } if (*holdp) { ASSERT(!e_ddi_branch_held(rdip)); e_ddi_branch_hold(rdip); } else { ASSERT(e_ddi_branch_held(rdip)); e_ddi_branch_rele(rdip); } return (DDI_WALK_PRUNECHILD); } void opl_hold_devtree() { dev_info_t *dip; int circ; int hold = 1; dip = ddi_root_node(); ndi_devi_enter(dip, &circ); ddi_walk_devs(ddi_get_child(dip), opl_hold_rele_devtree, &hold); ndi_devi_exit(dip, circ); } void opl_release_devtree() { dev_info_t *dip; int circ; int hold = 0; dip = ddi_root_node(); ndi_devi_enter(dip, &circ); ddi_walk_devs(ddi_get_child(dip), opl_hold_rele_devtree, &hold); ndi_devi_exit(dip, circ); } /* * This is a helper function that allows opl_create_node() to return a * pointer to a newly created node to its caller. */ /*ARGSUSED*/ static void opl_set_node(dev_info_t *node, void *arg, uint_t flags) { opl_probe_t *probe; probe = arg; probe->pr_node = node; } /* * Function to create a node in the device tree under a specified parent. * * e_ddi_branch_create() allows the creation of a whole branch with a * single call of the function. However, we only use it to create one node * at a time in the case of non-I/O device nodes. In other words, we * create branches by repeatedly using this function. This makes the * code more readable. * * The branch descriptor passed to e_ddi_branch_create() takes two * callbacks. The create() callback is used to set the properties of a * newly created node. The other callback is used to return a pointer * to the newly created node. The create() callback is passed by the * caller of this function based on the kind of node he wishes to * create. * * e_ddi_branch_create() returns with the newly created node held. We * only need to hold the top nodes of the branches we create. We release * the hold for the others. E.g., the "cmp" node needs to be held. Since * we hold the "cmp" node, there is no need to hold the "core" and "cpu" * nodes below it. */ static dev_info_t * opl_create_node(opl_probe_t *probe) { devi_branch_t branch; probe->pr_node = NULL; branch.arg = probe; branch.type = DEVI_BRANCH_SID; branch.create.sid_branch_create = probe->pr_create; branch.devi_branch_callback = opl_set_node; if (e_ddi_branch_create(probe->pr_parent, &branch, NULL, 0) != 0) return (NULL); ASSERT(probe->pr_node != NULL); if (probe->pr_hold == 0) e_ddi_branch_rele(probe->pr_node); return (probe->pr_node); } /* * Function to tear down a whole branch rooted at the specified node. * * Although we create each node of a branch individually, we destroy * a whole branch in one call. This is more efficient. */ static int opl_destroy_node(dev_info_t *node) { if (e_ddi_branch_destroy(node, NULL, 0) != 0) { char *path = kmem_alloc(MAXPATHLEN, KM_SLEEP); (void) ddi_pathname(node, path); cmn_err(CE_WARN, "OPL node removal failed: %s (%p)", path, (void *)node); kmem_free(path, MAXPATHLEN); return (-1); } return (0); } /* * Set the properties for a "cpu" node. */ /*ARGSUSED*/ static int opl_create_cpu(dev_info_t *node, void *arg, uint_t flags) { opl_probe_t *probe; hwd_cpu_chip_t *chip; hwd_core_t *core; hwd_cpu_t *cpu; int ret; probe = arg; chip = &probe->pr_sb->sb_cmu.cmu_cpu_chips[probe->pr_cpu_chip]; core = &chip->chip_cores[probe->pr_core]; cpu = &core->core_cpus[probe->pr_cpu]; OPL_UPDATE_PROP(string, node, "name", OPL_CPU_NODE); OPL_UPDATE_PROP(string, node, "device_type", OPL_CPU_NODE); OPL_UPDATE_PROP(int, node, "cpuid", cpu->cpu_cpuid); OPL_UPDATE_PROP(int, node, "reg", probe->pr_cpu); OPL_UPDATE_PROP(string, node, "status", "okay"); return (DDI_WALK_TERMINATE); } /* * Create "cpu" nodes as child nodes of a given "core" node. */ static int opl_probe_cpus(opl_probe_t *probe) { int i; hwd_cpu_chip_t *chip; hwd_core_t *core; hwd_cpu_t *cpus; chip = &probe->pr_sb->sb_cmu.cmu_cpu_chips[probe->pr_cpu_chip]; core = &chip->chip_cores[probe->pr_core]; cpus = &core->core_cpus[0]; for (i = 0; i < HWD_CPUS_PER_CORE; i++) { /* * Olympus-C has 2 cpus per core. * Jupiter has 4 cpus per core. * For the Olympus-C based platform, we expect the cpu_status * of the non-existent cpus to be set to missing. */ if (!HWD_STATUS_OK(cpus[i].cpu_status)) continue; probe->pr_create = opl_create_cpu; probe->pr_cpu = i; if (opl_create_node(probe) == NULL) { cmn_err(CE_WARN, "IKP: create cpu (%d-%d-%d-%d) failed", probe->pr_board, probe->pr_cpu_chip, probe->pr_core, probe->pr_cpu); return (-1); } } return (0); } /* * Set the properties for a "core" node. */ /*ARGSUSED*/ static int opl_create_core(dev_info_t *node, void *arg, uint_t flags) { opl_probe_t *probe; hwd_cpu_chip_t *chip; hwd_core_t *core; int sharing[2]; int ret; probe = arg; chip = &probe->pr_sb->sb_cmu.cmu_cpu_chips[probe->pr_cpu_chip]; core = &chip->chip_cores[probe->pr_core]; OPL_UPDATE_PROP(string, node, "name", OPL_CORE_NODE); OPL_UPDATE_PROP(string, node, "device_type", OPL_CORE_NODE); OPL_UPDATE_PROP(string, node, "compatible", chip->chip_compatible); OPL_UPDATE_PROP(int, node, "reg", probe->pr_core); OPL_UPDATE_PROP(int, node, "manufacturer#", core->core_manufacturer); OPL_UPDATE_PROP(int, node, "implementation#", core->core_implementation); OPL_UPDATE_PROP(int, node, "mask#", core->core_mask); OPL_UPDATE_PROP(int, node, "sparc-version", core->core_version); OPL_UPDATE_PROP(int, node, "clock-frequency", core->core_frequency); OPL_UPDATE_PROP(int, node, "l1-icache-size", core->core_l1_icache_size); OPL_UPDATE_PROP(int, node, "l1-icache-line-size", core->core_l1_icache_line_size); OPL_UPDATE_PROP(int, node, "l1-icache-associativity", core->core_l1_icache_associativity); OPL_UPDATE_PROP(int, node, "#itlb-entries", core->core_num_itlb_entries); OPL_UPDATE_PROP(int, node, "l1-dcache-size", core->core_l1_dcache_size); OPL_UPDATE_PROP(int, node, "l1-dcache-line-size", core->core_l1_dcache_line_size); OPL_UPDATE_PROP(int, node, "l1-dcache-associativity", core->core_l1_dcache_associativity); OPL_UPDATE_PROP(int, node, "#dtlb-entries", core->core_num_dtlb_entries); OPL_UPDATE_PROP(int, node, "l2-cache-size", core->core_l2_cache_size); OPL_UPDATE_PROP(int, node, "l2-cache-line-size", core->core_l2_cache_line_size); OPL_UPDATE_PROP(int, node, "l2-cache-associativity", core->core_l2_cache_associativity); sharing[0] = 0; sharing[1] = core->core_l2_cache_sharing; OPL_UPDATE_PROP_ARRAY(int, node, "l2-cache-sharing", sharing, 2); OPL_UPDATE_PROP(string, node, "status", "okay"); return (DDI_WALK_TERMINATE); } /* * Create "core" nodes as child nodes of a given "cmp" node. * * Create the branch below each "core" node". */ static int opl_probe_cores(opl_probe_t *probe) { int i; hwd_cpu_chip_t *chip; hwd_core_t *cores; dev_info_t *parent, *node; chip = &probe->pr_sb->sb_cmu.cmu_cpu_chips[probe->pr_cpu_chip]; cores = &chip->chip_cores[0]; parent = probe->pr_parent; for (i = 0; i < HWD_CORES_PER_CPU_CHIP; i++) { if (!HWD_STATUS_OK(cores[i].core_status)) continue; probe->pr_parent = parent; probe->pr_create = opl_create_core; probe->pr_core = i; node = opl_create_node(probe); if (node == NULL) { cmn_err(CE_WARN, "IKP: create core (%d-%d-%d) failed", probe->pr_board, probe->pr_cpu_chip, probe->pr_core); return (-1); } /* * Create "cpu" nodes below "core". */ probe->pr_parent = node; if (opl_probe_cpus(probe) != 0) return (-1); } return (0); } /* * Set the properties for a "cmp" node. */ /*ARGSUSED*/ static int opl_create_cpu_chip(dev_info_t *node, void *arg, uint_t flags) { opl_probe_t *probe; hwd_cpu_chip_t *chip; opl_range_t range; uint64_t dummy_addr; int ret; probe = arg; chip = &probe->pr_sb->sb_cmu.cmu_cpu_chips[probe->pr_cpu_chip]; OPL_UPDATE_PROP(string, node, "name", OPL_CPU_CHIP_NODE); OPL_UPDATE_PROP(int, node, "portid", chip->chip_portid); OPL_UPDATE_PROP(int, node, "board#", probe->pr_board); dummy_addr = OPL_PROC_AS(probe->pr_board, probe->pr_cpu_chip); range.rg_addr_hi = OPL_HI(dummy_addr); range.rg_addr_lo = OPL_LO(dummy_addr); range.rg_size_hi = 0; range.rg_size_lo = 0; OPL_UPDATE_PROP_ARRAY(int, node, "reg", (int *)&range, 4); OPL_UPDATE_PROP(int, node, "#address-cells", 1); OPL_UPDATE_PROP(int, node, "#size-cells", 0); OPL_UPDATE_PROP(string, node, "status", "okay"); return (DDI_WALK_TERMINATE); } /* * Create "cmp" nodes as child nodes of the root node. * * Create the branch below each "cmp" node. */ static int opl_probe_cpu_chips(opl_probe_t *probe) { int i; dev_info_t **cfg_cpu_chips; hwd_cpu_chip_t *chips; dev_info_t *node; cfg_cpu_chips = opl_boards[probe->pr_board].cfg_cpu_chips; chips = &probe->pr_sb->sb_cmu.cmu_cpu_chips[0]; for (i = 0; i < HWD_CPU_CHIPS_PER_CMU; i++) { ASSERT(cfg_cpu_chips[i] == NULL); if (!HWD_STATUS_OK(chips[i].chip_status)) continue; probe->pr_parent = ddi_root_node(); probe->pr_create = opl_create_cpu_chip; probe->pr_cpu_chip = i; probe->pr_hold = 1; node = opl_create_node(probe); if (node == NULL) { cmn_err(CE_WARN, "IKP: create chip (%d-%d) failed", probe->pr_board, probe->pr_cpu_chip); return (-1); } cfg_cpu_chips[i] = node; /* * Create "core" nodes below "cmp". * We hold the "cmp" node. So, there is no need to hold * the "core" and "cpu" nodes below it. */ probe->pr_parent = node; probe->pr_hold = 0; if (opl_probe_cores(probe) != 0) return (-1); } return (0); } /* * Set the properties for a "pseudo-mc" node. */ /*ARGSUSED*/ static int opl_create_pseudo_mc(dev_info_t *node, void *arg, uint_t flags) { opl_probe_t *probe; int board, portid; hwd_bank_t *bank; hwd_memory_t *mem; opl_range_t range; opl_mc_addr_t mc[HWD_BANKS_PER_CMU]; int status[2][7]; int i, j; int ret; probe = arg; board = probe->pr_board; OPL_UPDATE_PROP(string, node, "name", OPL_PSEUDO_MC_NODE); OPL_UPDATE_PROP(string, node, "device_type", "memory-controller"); OPL_UPDATE_PROP(string, node, "compatible", "FJSV,oplmc"); portid = OPL_LSB_TO_PSEUDOMC_PORTID(board); OPL_UPDATE_PROP(int, node, "portid", portid); range.rg_addr_hi = OPL_HI(OPL_MC_AS(board)); range.rg_addr_lo = 0x200; range.rg_size_hi = 0; range.rg_size_lo = 0; OPL_UPDATE_PROP_ARRAY(int, node, "reg", (int *)&range, 4); OPL_UPDATE_PROP(int, node, "board#", board); OPL_UPDATE_PROP(int, node, "physical-board#", probe->pr_sb->sb_psb_number); OPL_UPDATE_PROP(int, node, "#address-cells", 1); OPL_UPDATE_PROP(int, node, "#size-cells", 2); mem = &probe->pr_sb->sb_cmu.cmu_memory; range.rg_addr_hi = OPL_HI(mem->mem_start_address); range.rg_addr_lo = OPL_LO(mem->mem_start_address); range.rg_size_hi = OPL_HI(mem->mem_size); range.rg_size_lo = OPL_LO(mem->mem_size); OPL_UPDATE_PROP_ARRAY(int, node, "sb-mem-ranges", (int *)&range, 4); bank = probe->pr_sb->sb_cmu.cmu_memory.mem_banks; for (i = 0, j = 0; i < HWD_BANKS_PER_CMU; i++) { if (!HWD_STATUS_OK(bank[i].bank_status)) continue; mc[j].mc_bank = i; mc[j].mc_hi = OPL_HI(bank[i].bank_register_address); mc[j].mc_lo = OPL_LO(bank[i].bank_register_address); j++; } if (j > 0) { OPL_UPDATE_PROP_ARRAY(int, node, "mc-addr", (int *)mc, j*3); } else { /* * If there is no memory, we need the mc-addr property, but * it is length 0. The only way to do this using ndi seems * to be by creating a boolean property. */ ret = ndi_prop_create_boolean(DDI_DEV_T_NONE, node, "mc-addr"); OPL_UPDATE_PROP_ERR(ret, "mc-addr"); } OPL_UPDATE_PROP_ARRAY(byte, node, "cs0-mc-pa-trans-table", mem->mem_cs[0].cs_pa_mac_table, 64); OPL_UPDATE_PROP_ARRAY(byte, node, "cs1-mc-pa-trans-table", mem->mem_cs[1].cs_pa_mac_table, 64); #define CS_PER_MEM 2 for (i = 0, j = 0; i < CS_PER_MEM; i++) { if (HWD_STATUS_OK(mem->mem_cs[i].cs_status) || HWD_STATUS_FAILED(mem->mem_cs[i].cs_status)) { status[j][0] = i; if (HWD_STATUS_OK(mem->mem_cs[i].cs_status)) status[j][1] = 0; else status[j][1] = 1; status[j][2] = OPL_HI(mem->mem_cs[i].cs_available_capacity); status[j][3] = OPL_LO(mem->mem_cs[i].cs_available_capacity); status[j][4] = OPL_HI(mem->mem_cs[i].cs_dimm_capacity); status[j][5] = OPL_LO(mem->mem_cs[i].cs_dimm_capacity); status[j][6] = mem->mem_cs[i].cs_number_of_dimms; j++; } } if (j > 0) { OPL_UPDATE_PROP_ARRAY(int, node, "cs-status", (int *)status, j*7); } else { /* * If there is no memory, we need the cs-status property, but * it is length 0. The only way to do this using ndi seems * to be by creating a boolean property. */ ret = ndi_prop_create_boolean(DDI_DEV_T_NONE, node, "cs-status"); OPL_UPDATE_PROP_ERR(ret, "cs-status"); } return (DDI_WALK_TERMINATE); } /* * Create "pseudo-mc" nodes */ static int opl_probe_memory(opl_probe_t *probe) { int board; opl_board_cfg_t *board_cfg; dev_info_t *node; board = probe->pr_board; board_cfg = &opl_boards[board]; ASSERT(board_cfg->cfg_pseudo_mc == NULL); probe->pr_parent = ddi_root_node(); probe->pr_create = opl_create_pseudo_mc; probe->pr_hold = 1; node = opl_create_node(probe); if (node == NULL) { cmn_err(CE_WARN, "IKP: create pseudo-mc (%d) failed", board); return (-1); } board_cfg->cfg_pseudo_mc = node; return (0); } /* * Allocate the fcode ops handle. */ /*ARGSUSED*/ static fco_handle_t opl_fc_ops_alloc_handle(dev_info_t *parent, dev_info_t *child, void *fcode, size_t fcode_size, char *unit_address, char *my_args) { fco_handle_t rp; phandle_t h; char *buf; rp = kmem_zalloc(sizeof (struct fc_resource_list), KM_SLEEP); rp->next_handle = fc_ops_alloc_handle(parent, child, fcode, fcode_size, unit_address, NULL); rp->ap = parent; rp->child = child; rp->fcode = fcode; rp->fcode_size = fcode_size; rp->my_args = my_args; if (unit_address) { buf = kmem_zalloc(UNIT_ADDR_SIZE, KM_SLEEP); (void) strcpy(buf, unit_address); rp->unit_address = buf; } /* * Add the child's nodeid to our table... */ h = ddi_get_nodeid(rp->child); fc_add_dip_to_phandle(fc_handle_to_phandle_head(rp), rp->child, h); return (rp); } static void opl_fc_ops_free_handle(fco_handle_t rp) { struct fc_resource *resp, *nresp; ASSERT(rp); if (rp->next_handle) fc_ops_free_handle(rp->next_handle); if (rp->unit_address) kmem_free(rp->unit_address, UNIT_ADDR_SIZE); /* * Release all the resources from the resource list */ for (resp = rp->head; resp != NULL; resp = nresp) { nresp = resp->next; switch (resp->type) { case RT_MAP: /* * If this is still mapped, we'd better unmap it now, * or all our structures that are tracking it will * be leaked. */ if (resp->fc_map_handle != NULL) opl_unmap_phys(&resp->fc_map_handle); break; case RT_DMA: /* * DMA has to be freed up at exit time. */ cmn_err(CE_CONT, "opl_fc_ops_free_handle: Unexpected DMA seen!"); break; case RT_CONTIGIOUS: FC_DEBUG2(1, CE_CONT, "opl_fc_ops_free: " "Free claim-memory resource 0x%lx size 0x%x\n", resp->fc_contig_virt, resp->fc_contig_len); (void) ndi_ra_free(ddi_root_node(), (uint64_t)resp->fc_contig_virt, resp->fc_contig_len, "opl-fcodemem", NDI_RA_PASS); break; default: cmn_err(CE_CONT, "opl_fc_ops_free: " "unknown resource type %d", resp->type); break; } fc_rem_resource(rp, resp); kmem_free(resp, sizeof (struct fc_resource)); } kmem_free(rp, sizeof (struct fc_resource_list)); } int opl_fc_do_op(dev_info_t *ap, fco_handle_t rp, fc_ci_t *cp) { opl_fc_ops_t *op; char *service = fc_cell2ptr(cp->svc_name); ASSERT(rp); FC_DEBUG1(1, CE_CONT, "opl_fc_do_op: <%s>\n", service); /* * First try the generic fc_ops. */ if (fc_ops(ap, rp->next_handle, cp) == 0) return (0); /* * Now try the Jupiter-specific ops. */ for (op = opl_fc_ops; op->fc_service != NULL; ++op) if (strcmp(op->fc_service, service) == 0) return (op->fc_op(ap, rp, cp)); FC_DEBUG1(9, CE_CONT, "opl_fc_do_op: <%s> not serviced\n", service); return (-1); } /* * map-in (phys.lo phys.hi size -- virt) */ static int opl_map_in(dev_info_t *ap, fco_handle_t rp, fc_ci_t *cp) { size_t len; int error; caddr_t virt; struct fc_resource *resp; struct regspec rspec; ddi_device_acc_attr_t acc; ddi_acc_handle_t h; if (fc_cell2int(cp->nargs) != 3) return (fc_syntax_error(cp, "nargs must be 3")); if (fc_cell2int(cp->nresults) < 1) return (fc_syntax_error(cp, "nresults must be >= 1")); rspec.regspec_size = len = fc_cell2size(fc_arg(cp, 0)); rspec.regspec_bustype = fc_cell2uint(fc_arg(cp, 1)); rspec.regspec_addr = fc_cell2uint(fc_arg(cp, 2)); acc.devacc_attr_version = DDI_DEVICE_ATTR_V0; acc.devacc_attr_endian_flags = DDI_STRUCTURE_BE_ACC; acc.devacc_attr_dataorder = DDI_STRICTORDER_ACC; FC_DEBUG3(1, CE_CONT, "opl_map_in: attempting map in " "address 0x%08x.%08x length %x\n", rspec.regspec_bustype, rspec.regspec_addr, rspec.regspec_size); error = opl_map_phys(rp->child, &rspec, &virt, &acc, &h); if (error) { FC_DEBUG3(1, CE_CONT, "opl_map_in: map in failed - " "address 0x%08x.%08x length %x\n", rspec.regspec_bustype, rspec.regspec_addr, rspec.regspec_size); return (fc_priv_error(cp, "opl map-in failed")); } FC_DEBUG1(3, CE_CONT, "opl_map_in: returning virt %p\n", virt); cp->nresults = fc_int2cell(1); fc_result(cp, 0) = fc_ptr2cell(virt); /* * Log this resource ... */ resp = kmem_zalloc(sizeof (struct fc_resource), KM_SLEEP); resp->type = RT_MAP; resp->fc_map_virt = virt; resp->fc_map_len = len; resp->fc_map_handle = h; fc_add_resource(rp, resp); return (fc_success_op(ap, rp, cp)); } /* * map-out (virt size -- ) */ static int opl_map_out(dev_info_t *ap, fco_handle_t rp, fc_ci_t *cp) { caddr_t virt; size_t len; struct fc_resource *resp; if (fc_cell2int(cp->nargs) != 2) return (fc_syntax_error(cp, "nargs must be 2")); virt = fc_cell2ptr(fc_arg(cp, 1)); len = fc_cell2size(fc_arg(cp, 0)); FC_DEBUG2(1, CE_CONT, "opl_map_out: attempting map out %p %x\n", virt, len); /* * Find if this request matches a mapping resource we set up. */ fc_lock_resource_list(rp); for (resp = rp->head; resp != NULL; resp = resp->next) { if (resp->type != RT_MAP) continue; if (resp->fc_map_virt != virt) continue; if (resp->fc_map_len == len) break; } fc_unlock_resource_list(rp); if (resp == NULL) return (fc_priv_error(cp, "request doesn't match a " "known mapping")); opl_unmap_phys(&resp->fc_map_handle); /* * remove the resource from the list and release it. */ fc_rem_resource(rp, resp); kmem_free(resp, sizeof (struct fc_resource)); cp->nresults = fc_int2cell(0); return (fc_success_op(ap, rp, cp)); } static int opl_register_fetch(dev_info_t *ap, fco_handle_t rp, fc_ci_t *cp) { size_t len; caddr_t virt; int error = 0; uint64_t v; uint64_t x; uint32_t l; uint16_t w; uint8_t b; char *service = fc_cell2ptr(cp->svc_name); struct fc_resource *resp; if (fc_cell2int(cp->nargs) != 1) return (fc_syntax_error(cp, "nargs must be 1")); if (fc_cell2int(cp->nresults) < 1) return (fc_syntax_error(cp, "nresults must be >= 1")); virt = fc_cell2ptr(fc_arg(cp, 0)); /* * Determine the access width .. we can switch on the 2nd * character of the name which is "rx@", "rl@", "rb@" or "rw@" */ switch (*(service + 1)) { case 'x': len = sizeof (x); break; case 'l': len = sizeof (l); break; case 'w': len = sizeof (w); break; case 'b': len = sizeof (b); break; } /* * Check the alignment ... */ if (((intptr_t)virt & (len - 1)) != 0) return (fc_priv_error(cp, "unaligned access")); /* * Find if this virt is 'within' a request we know about */ fc_lock_resource_list(rp); for (resp = rp->head; resp != NULL; resp = resp->next) { if (resp->type == RT_MAP) { if ((virt >= (caddr_t)resp->fc_map_virt) && ((virt + len) <= ((caddr_t)resp->fc_map_virt + resp->fc_map_len))) break; } else if (resp->type == RT_CONTIGIOUS) { if ((virt >= (caddr_t)resp->fc_contig_virt) && ((virt + len) <= ((caddr_t)resp->fc_contig_virt + resp->fc_contig_len))) break; } } fc_unlock_resource_list(rp); if (resp == NULL) { return (fc_priv_error(cp, "request not within " "known mappings")); } switch (len) { case sizeof (x): if (resp->type == RT_MAP) error = ddi_peek64(rp->child, (int64_t *)virt, (int64_t *)&x); else /* RT_CONTIGIOUS */ x = *(int64_t *)virt; v = x; break; case sizeof (l): if (resp->type == RT_MAP) error = ddi_peek32(rp->child, (int32_t *)virt, (int32_t *)&l); else /* RT_CONTIGIOUS */ l = *(int32_t *)virt; v = l; break; case sizeof (w): if (resp->type == RT_MAP) error = ddi_peek16(rp->child, (int16_t *)virt, (int16_t *)&w); else /* RT_CONTIGIOUS */ w = *(int16_t *)virt; v = w; break; case sizeof (b): if (resp->type == RT_MAP) error = ddi_peek8(rp->child, (int8_t *)virt, (int8_t *)&b); else /* RT_CONTIGIOUS */ b = *(int8_t *)virt; v = b; break; } if (error == DDI_FAILURE) { FC_DEBUG2(1, CE_CONT, "opl_register_fetch: access error " "accessing virt %p len %d\n", virt, len); return (fc_priv_error(cp, "access error")); } FC_DEBUG3(1, CE_CONT, "register_fetch (%s) %llx %llx\n", service, virt, v); cp->nresults = fc_int2cell(1); switch (len) { case sizeof (x): fc_result(cp, 0) = x; break; case sizeof (l): fc_result(cp, 0) = fc_uint32_t2cell(l); break; case sizeof (w): fc_result(cp, 0) = fc_uint16_t2cell(w); break; case sizeof (b): fc_result(cp, 0) = fc_uint8_t2cell(b); break; } return (fc_success_op(ap, rp, cp)); } static int opl_register_store(dev_info_t *ap, fco_handle_t rp, fc_ci_t *cp) { size_t len; caddr_t virt; uint64_t v; uint64_t x; uint32_t l; uint16_t w; uint8_t b; char *service = fc_cell2ptr(cp->svc_name); struct fc_resource *resp; int error = 0; if (fc_cell2int(cp->nargs) != 2) return (fc_syntax_error(cp, "nargs must be 2")); virt = fc_cell2ptr(fc_arg(cp, 0)); /* * Determine the access width .. we can switch on the 2nd * character of the name which is "rx!", "rl!", "rb!" or "rw!" */ switch (*(service + 1)) { case 'x': len = sizeof (x); x = fc_arg(cp, 1); v = x; break; case 'l': len = sizeof (l); l = fc_cell2uint32_t(fc_arg(cp, 1)); v = l; break; case 'w': len = sizeof (w); w = fc_cell2uint16_t(fc_arg(cp, 1)); v = w; break; case 'b': len = sizeof (b); b = fc_cell2uint8_t(fc_arg(cp, 1)); v = b; break; } FC_DEBUG3(1, CE_CONT, "register_store (%s) %llx %llx\n", service, virt, v); /* * Check the alignment ... */ if (((intptr_t)virt & (len - 1)) != 0) return (fc_priv_error(cp, "unaligned access")); /* * Find if this virt is 'within' a request we know about */ fc_lock_resource_list(rp); for (resp = rp->head; resp != NULL; resp = resp->next) { if (resp->type == RT_MAP) { if ((virt >= (caddr_t)resp->fc_map_virt) && ((virt + len) <= ((caddr_t)resp->fc_map_virt + resp->fc_map_len))) break; } else if (resp->type == RT_CONTIGIOUS) { if ((virt >= (caddr_t)resp->fc_contig_virt) && ((virt + len) <= ((caddr_t)resp->fc_contig_virt + resp->fc_contig_len))) break; } } fc_unlock_resource_list(rp); if (resp == NULL) return (fc_priv_error(cp, "request not within" "known mappings")); switch (len) { case sizeof (x): if (resp->type == RT_MAP) error = ddi_poke64(rp->child, (int64_t *)virt, x); else if (resp->type == RT_CONTIGIOUS) *(uint64_t *)virt = x; break; case sizeof (l): if (resp->type == RT_MAP) error = ddi_poke32(rp->child, (int32_t *)virt, l); else if (resp->type == RT_CONTIGIOUS) *(uint32_t *)virt = l; break; case sizeof (w): if (resp->type == RT_MAP) error = ddi_poke16(rp->child, (int16_t *)virt, w); else if (resp->type == RT_CONTIGIOUS) *(uint16_t *)virt = w; break; case sizeof (b): if (resp->type == RT_MAP) error = ddi_poke8(rp->child, (int8_t *)virt, b); else if (resp->type == RT_CONTIGIOUS) *(uint8_t *)virt = b; break; } if (error == DDI_FAILURE) { FC_DEBUG2(1, CE_CONT, "opl_register_store: access error " "accessing virt %p len %d\n", virt, len); return (fc_priv_error(cp, "access error")); } cp->nresults = fc_int2cell(0); return (fc_success_op(ap, rp, cp)); } /* * opl_claim_memory * * claim-memory (align size vhint -- vaddr) */ static int opl_claim_memory(dev_info_t *ap, fco_handle_t rp, fc_ci_t *cp) { int align, size, vhint; uint64_t answer, alen; ndi_ra_request_t request; struct fc_resource *resp; if (fc_cell2int(cp->nargs) != 3) return (fc_syntax_error(cp, "nargs must be 3")); if (fc_cell2int(cp->nresults) < 1) return (fc_syntax_error(cp, "nresults must be >= 1")); vhint = fc_cell2int(fc_arg(cp, 2)); size = fc_cell2int(fc_arg(cp, 1)); align = fc_cell2int(fc_arg(cp, 0)); FC_DEBUG3(1, CE_CONT, "opl_claim_memory: align=0x%x size=0x%x " "vhint=0x%x\n", align, size, vhint); if (size == 0) { cmn_err(CE_WARN, "opl_claim_memory - unable to allocate " "contiguous memory of size zero\n"); return (fc_priv_error(cp, "allocation error")); } if (vhint) { cmn_err(CE_WARN, "opl_claim_memory - vhint is not zero " "vhint=0x%x - Ignoring Argument\n", vhint); } bzero((caddr_t)&request, sizeof (ndi_ra_request_t)); request.ra_flags = NDI_RA_ALLOC_BOUNDED; request.ra_boundbase = 0; request.ra_boundlen = 0xffffffff; request.ra_len = size; request.ra_align_mask = align - 1; if (ndi_ra_alloc(ddi_root_node(), &request, &answer, &alen, "opl-fcodemem", NDI_RA_PASS) != NDI_SUCCESS) { cmn_err(CE_WARN, "opl_claim_memory - unable to allocate " "contiguous memory\n"); return (fc_priv_error(cp, "allocation error")); } FC_DEBUG2(1, CE_CONT, "opl_claim_memory: address allocated=0x%lx " "size=0x%x\n", answer, alen); cp->nresults = fc_int2cell(1); fc_result(cp, 0) = answer; /* * Log this resource ... */ resp = kmem_zalloc(sizeof (struct fc_resource), KM_SLEEP); resp->type = RT_CONTIGIOUS; resp->fc_contig_virt = (void *)answer; resp->fc_contig_len = size; fc_add_resource(rp, resp); return (fc_success_op(ap, rp, cp)); } /* * opl_release_memory * * release-memory (size vaddr -- ) */ static int opl_release_memory(dev_info_t *ap, fco_handle_t rp, fc_ci_t *cp) { int32_t vaddr, size; struct fc_resource *resp; if (fc_cell2int(cp->nargs) != 2) return (fc_syntax_error(cp, "nargs must be 2")); if (fc_cell2int(cp->nresults) != 0) return (fc_syntax_error(cp, "nresults must be 0")); vaddr = fc_cell2int(fc_arg(cp, 1)); size = fc_cell2int(fc_arg(cp, 0)); FC_DEBUG2(1, CE_CONT, "opl_release_memory: vaddr=0x%x size=0x%x\n", vaddr, size); /* * Find if this request matches a mapping resource we set up. */ fc_lock_resource_list(rp); for (resp = rp->head; resp != NULL; resp = resp->next) { if (resp->type != RT_CONTIGIOUS) continue; if (resp->fc_contig_virt != (void *)(uintptr_t)vaddr) continue; if (resp->fc_contig_len == size) break; } fc_unlock_resource_list(rp); if (resp == NULL) return (fc_priv_error(cp, "request doesn't match a " "known mapping")); (void) ndi_ra_free(ddi_root_node(), vaddr, size, "opl-fcodemem", NDI_RA_PASS); /* * remove the resource from the list and release it. */ fc_rem_resource(rp, resp); kmem_free(resp, sizeof (struct fc_resource)); cp->nresults = fc_int2cell(0); return (fc_success_op(ap, rp, cp)); } /* * opl_vtop * * vtop (vaddr -- paddr.lo paddr.hi) */ static int opl_vtop(dev_info_t *ap, fco_handle_t rp, fc_ci_t *cp) { int vaddr; uint64_t paddr; struct fc_resource *resp; if (fc_cell2int(cp->nargs) != 1) return (fc_syntax_error(cp, "nargs must be 1")); if (fc_cell2int(cp->nresults) >= 3) return (fc_syntax_error(cp, "nresults must be less than 2")); vaddr = fc_cell2int(fc_arg(cp, 0)); /* * Find if this request matches a mapping resource we set up. */ fc_lock_resource_list(rp); for (resp = rp->head; resp != NULL; resp = resp->next) { if (resp->type != RT_CONTIGIOUS) continue; if (resp->fc_contig_virt == (void *)(uintptr_t)vaddr) break; } fc_unlock_resource_list(rp); if (resp == NULL) return (fc_priv_error(cp, "request doesn't match a " "known mapping")); paddr = va_to_pa((void *)(uintptr_t)vaddr); FC_DEBUG2(1, CE_CONT, "opl_vtop: vaddr=0x%x paddr=0x%x\n", vaddr, paddr); cp->nresults = fc_int2cell(2); fc_result(cp, 0) = paddr; fc_result(cp, 1) = 0; return (fc_success_op(ap, rp, cp)); } static int opl_config_child(dev_info_t *ap, fco_handle_t rp, fc_ci_t *cp) { fc_phandle_t h; if (fc_cell2int(cp->nargs) != 0) return (fc_syntax_error(cp, "nargs must be 0")); if (fc_cell2int(cp->nresults) < 1) return (fc_syntax_error(cp, "nresults must be >= 1")); h = fc_dip_to_phandle(fc_handle_to_phandle_head(rp), rp->child); cp->nresults = fc_int2cell(1); fc_result(cp, 0) = fc_phandle2cell(h); return (fc_success_op(ap, rp, cp)); } static int opl_get_fcode(dev_info_t *ap, fco_handle_t rp, fc_ci_t *cp) { caddr_t dropin_name_virt, fcode_virt; char *dropin_name, *fcode; int fcode_len, status; if (fc_cell2int(cp->nargs) != 3) return (fc_syntax_error(cp, "nargs must be 3")); if (fc_cell2int(cp->nresults) < 1) return (fc_syntax_error(cp, "nresults must be >= 1")); dropin_name_virt = fc_cell2ptr(fc_arg(cp, 0)); fcode_virt = fc_cell2ptr(fc_arg(cp, 1)); fcode_len = fc_cell2int(fc_arg(cp, 2)); dropin_name = kmem_zalloc(FC_SVC_NAME_LEN, KM_SLEEP); FC_DEBUG2(1, CE_CONT, "get_fcode: %x %d\n", fcode_virt, fcode_len); if (copyinstr(fc_cell2ptr(dropin_name_virt), dropin_name, FC_SVC_NAME_LEN - 1, NULL)) { FC_DEBUG1(1, CE_CONT, "opl_get_fcode: " "fault copying in drop in name %p\n", dropin_name_virt); status = 0; } else { FC_DEBUG1(1, CE_CONT, "get_fcode: %s\n", dropin_name); fcode = kmem_zalloc(fcode_len, KM_SLEEP); if ((status = prom_get_fcode(dropin_name, fcode)) != 0) { if (copyout((void *)fcode, (void *)fcode_virt, fcode_len)) { cmn_err(CE_WARN, " opl_get_fcode: Unable " "to copy out fcode image"); status = 0; } } kmem_free(fcode, fcode_len); } kmem_free(dropin_name, FC_SVC_NAME_LEN); cp->nresults = fc_int2cell(1); fc_result(cp, 0) = status; return (fc_success_op(ap, rp, cp)); } static int opl_get_fcode_size(dev_info_t *ap, fco_handle_t rp, fc_ci_t *cp) { caddr_t virt; char *dropin_name; int len; if (fc_cell2int(cp->nargs) != 1) return (fc_syntax_error(cp, "nargs must be 1")); if (fc_cell2int(cp->nresults) < 1) return (fc_syntax_error(cp, "nresults must be >= 1")); virt = fc_cell2ptr(fc_arg(cp, 0)); dropin_name = kmem_zalloc(FC_SVC_NAME_LEN, KM_SLEEP); FC_DEBUG0(1, CE_CONT, "opl_get_fcode_size:\n"); if (copyinstr(fc_cell2ptr(virt), dropin_name, FC_SVC_NAME_LEN - 1, NULL)) { FC_DEBUG1(1, CE_CONT, "opl_get_fcode_size: " "fault copying in drop in name %p\n", virt); len = 0; } else { FC_DEBUG1(1, CE_CONT, "opl_get_fcode_size: %s\n", dropin_name); len = prom_get_fcode_size(dropin_name); } kmem_free(dropin_name, FC_SVC_NAME_LEN); FC_DEBUG1(1, CE_CONT, "opl_get_fcode_size: fcode_len = %d\n", len); cp->nresults = fc_int2cell(1); fc_result(cp, 0) = len; return (fc_success_op(ap, rp, cp)); } static int opl_map_phys(dev_info_t *dip, struct regspec *phys_spec, caddr_t *addrp, ddi_device_acc_attr_t *accattrp, ddi_acc_handle_t *handlep) { ddi_map_req_t mapreq; ddi_acc_hdl_t *acc_handlep; int result; struct regspec *rspecp; *handlep = impl_acc_hdl_alloc(KM_SLEEP, NULL); acc_handlep = impl_acc_hdl_get(*handlep); acc_handlep->ah_vers = VERS_ACCHDL; acc_handlep->ah_dip = dip; acc_handlep->ah_rnumber = 0; acc_handlep->ah_offset = 0; acc_handlep->ah_len = 0; acc_handlep->ah_acc = *accattrp; rspecp = kmem_zalloc(sizeof (struct regspec), KM_SLEEP); *rspecp = *phys_spec; /* * cache a copy of the reg spec */ acc_handlep->ah_bus_private = rspecp; mapreq.map_op = DDI_MO_MAP_LOCKED; mapreq.map_type = DDI_MT_REGSPEC; mapreq.map_obj.rp = (struct regspec *)phys_spec; mapreq.map_prot = PROT_READ | PROT_WRITE; mapreq.map_flags = DDI_MF_KERNEL_MAPPING; mapreq.map_handlep = acc_handlep; mapreq.map_vers = DDI_MAP_VERSION; result = ddi_map(dip, &mapreq, 0, 0, addrp); if (result != DDI_SUCCESS) { impl_acc_hdl_free(*handlep); kmem_free(rspecp, sizeof (struct regspec)); *handlep = (ddi_acc_handle_t)NULL; } else { acc_handlep->ah_addr = *addrp; } return (result); } static void opl_unmap_phys(ddi_acc_handle_t *handlep) { ddi_map_req_t mapreq; ddi_acc_hdl_t *acc_handlep; struct regspec *rspecp; acc_handlep = impl_acc_hdl_get(*handlep); ASSERT(acc_handlep); rspecp = acc_handlep->ah_bus_private; mapreq.map_op = DDI_MO_UNMAP; mapreq.map_type = DDI_MT_REGSPEC; mapreq.map_obj.rp = (struct regspec *)rspecp; mapreq.map_prot = PROT_READ | PROT_WRITE; mapreq.map_flags = DDI_MF_KERNEL_MAPPING; mapreq.map_handlep = acc_handlep; mapreq.map_vers = DDI_MAP_VERSION; (void) ddi_map(acc_handlep->ah_dip, &mapreq, acc_handlep->ah_offset, acc_handlep->ah_len, &acc_handlep->ah_addr); impl_acc_hdl_free(*handlep); /* * Free the cached copy */ kmem_free(rspecp, sizeof (struct regspec)); *handlep = (ddi_acc_handle_t)NULL; } static int opl_get_hwd_va(dev_info_t *ap, fco_handle_t rp, fc_ci_t *cp) { uint32_t portid; void *hwd_virt; hwd_header_t *hwd_h = NULL; hwd_sb_t *hwd_sb = NULL; int lsb, ch, leaf; int status = 1; /* Check the argument */ if (fc_cell2int(cp->nargs) != 2) return (fc_syntax_error(cp, "nargs must be 2")); if (fc_cell2int(cp->nresults) < 1) return (fc_syntax_error(cp, "nresults must be >= 1")); /* Get the parameters */ portid = fc_cell2uint32_t(fc_arg(cp, 0)); hwd_virt = (void *)fc_cell2ptr(fc_arg(cp, 1)); /* Get the ID numbers */ lsb = OPL_IO_PORTID_TO_LSB(portid); ch = OPL_PORTID_TO_CHANNEL(portid); leaf = OPL_PORTID_TO_LEAF(portid); ASSERT(OPL_IO_PORTID(lsb, ch, leaf) == portid); /* Set the pointer of hwd. */ if ((hwd_h = (hwd_header_t *)opl_boards[lsb].cfg_hwd) == NULL) { return (fc_priv_error(cp, "null hwd header")); } /* Set the pointer of hwd sb. */ if ((hwd_sb = (hwd_sb_t *)((char *)hwd_h + hwd_h->hdr_sb_info_offset)) == NULL) { return (fc_priv_error(cp, "null hwd sb")); } if (ch == OPL_CMU_CHANNEL) { /* Copyout CMU-CH HW Descriptor */ if (copyout((void *)&hwd_sb->sb_cmu.cmu_ch, (void *)hwd_virt, sizeof (hwd_cmu_chan_t))) { cmn_err(CE_WARN, "opl_get_hwd_va: " "Unable to copy out cmuch descriptor for %x", portid); status = 0; } } else { /* Copyout PCI-CH HW Descriptor */ if (copyout((void *)&hwd_sb->sb_pci_ch[ch].pci_leaf[leaf], (void *)hwd_virt, sizeof (hwd_leaf_t))) { cmn_err(CE_WARN, "opl_get_hwd_va: " "Unable to copy out pcich descriptor for %x", portid); status = 0; } } cp->nresults = fc_int2cell(1); fc_result(cp, 0) = status; return (fc_success_op(ap, rp, cp)); } /* * After Solaris boots, a user can enter OBP using L1A, etc. While in OBP, * interrupts may be received from PCI devices. These interrupts * cannot be handled meaningfully since the system is in OBP. These * interrupts need to be cleared on the CPU side so that the CPU may * continue with whatever it is doing. Devices that have raised the * interrupts are expected to reraise the interrupts after sometime * as they have not been handled. At that time, Solaris will have a * chance to properly service the interrupts. * * The location of the interrupt registers depends on what is present * at a port. OPL currently supports the Oberon and the CMU channel. * The following handler handles both kinds of ports and computes * interrupt register addresses from the specifications and Jupiter Bus * device bindings. * * Fcode drivers install their interrupt handler via a "master-interrupt" * service. For boot time devices, this takes place within OBP. In the case * of DR, OPL uses IKP. The Fcode drivers that run within the efcode framework * attempt to install their handler via the "master-interrupt" service. * However, we cannot meaningfully install the Fcode driver's handler. * Instead, we install our own handler in OBP which does the same thing. * * Note that the only handling done for interrupts here is to clear it * on the CPU side. If any device in the future requires more special * handling, we would have to put in some kind of framework for adding * device-specific handlers. This is *highly* unlikely, but possible. * * Finally, OBP provides a hook called "unix-interrupt-handler" to install * a Solaris-defined master-interrupt handler for a port. The default * definition for this method does nothing. Solaris may override this * with its own definition. This is the way the following handler gets * control from OBP when interrupts happen at a port after L1A, etc. */ static char define_master_interrupt_handler[] = /* * This method translates an Oberon port id to the base (physical) address * of the interrupt clear registers for that port id. */ ": pcich-mid>clear-int-pa ( mid -- pa ) " " dup 1 >> 7 and ( mid ch# ) " " over 4 >> h# 1f and ( mid ch# lsb# ) " " 1 d# 46 << ( mid ch# lsb# pa ) " " swap d# 40 << or ( mid ch# pa ) " " swap d# 37 << or ( mid pa ) " " swap 1 and if h# 70.0000 else h# 60.0000 then " " or h# 1400 or ( pa ) " "; " /* * This method translates a CMU channel port id to the base (physical) address * of the interrupt clear registers for that port id. There are two classes of * interrupts that need to be handled for a CMU channel: * - obio interrupts * - pci interrupts * So, there are two addresses that need to be computed. */ ": cmuch-mid>clear-int-pa ( mid -- obio-pa pci-pa ) " " dup 1 >> 7 and ( mid ch# ) " " over 4 >> h# 1f and ( mid ch# lsb# ) " " 1 d# 46 << ( mid ch# lsb# pa ) " " swap d# 40 << or ( mid ch# pa ) " " swap d# 37 << or ( mid pa ) " " nip dup h# 1800 + ( pa obio-pa ) " " swap h# 1400 + ( obio-pa pci-pa ) " "; " /* * This method checks if a given I/O port ID is valid or not. * For a given LSB, * Oberon ports range from 0 - 3 * CMU ch ports range from 4 - 4 * * Also, the Oberon supports leaves 0 and 1. * The CMU ch supports only one leaf, leaf 0. */ ": valid-io-mid? ( mid -- flag ) " " dup 1 >> 7 and ( mid ch# ) " " dup 4 > if 2drop false exit then ( mid ch# ) " " 4 = swap 1 and 1 = and not " "; " /* * This method checks if a given port id is a CMU ch. */ ": cmuch? ( mid -- flag ) 1 >> 7 and 4 = ; " /* * Given the base address of the array of interrupt clear registers for * a port id, this method iterates over the given interrupt number bitmap * and resets the interrupt on the CPU side for every interrupt number * in the bitmap. Note that physical addresses are used to perform the * writes, not virtual addresses. This allows the handler to work without * any involvement from Solaris. */ ": clear-ints ( pa bitmap count -- ) " " 0 do ( pa bitmap ) " " dup 0= if 2drop unloop exit then " " tuck ( bitmap pa bitmap ) " " 1 and if ( bitmap pa ) " " dup i 8 * + 0 swap ( bitmap pa 0 pa' ) " " h# 15 spacex! ( bitmap pa ) " " then ( bitmap pa ) " " swap 1 >> ( pa bitmap ) " " loop " "; " /* * This method replaces the master-interrupt handler in OBP. Once * this method is plumbed into OBP, OBP transfers control to this * handler while returning to Solaris from OBP after L1A. This method's * task is to simply reset received interrupts on the CPU side. * When the devices reassert the interrupts later, Solaris will * be able to see them and handle them. * * For each port ID that has interrupts, this method is called * once by OBP. The input arguments are: * mid portid * bitmap bitmap of interrupts that have happened * * This method returns true, if it is able to handle the interrupts. * OBP does nothing further. * * This method returns false, if it encountered a problem. Currently, * the only problem could be an invalid port id. OBP needs to do * its own processing in that case. If this method returns false, * it preserves the mid and bitmap arguments for OBP. */ ": unix-resend-mondos ( mid bitmap -- [ mid bitmap false ] | true ) " /* * Uncomment the following line if you want to display the input arguments. * This is meant for debugging. * " .\" Bitmap=\" dup u. .\" MID=\" over u. cr " */ /* * If the port id is not valid (according to the Oberon and CMU ch * specifications, then return false to OBP to continue further * processing. */ " over valid-io-mid? not if ( mid bitmap ) " " false exit " " then " /* * If the port is a CMU ch, then the 64-bit bitmap represents * 2 32-bit bitmaps: * - obio interrupt bitmap (20 bits) * - pci interrupt bitmap (32 bits) * * - Split the bitmap into two * - Compute the base addresses of the interrupt clear registers * for both pci interrupts and obio interrupts * - Clear obio interrupts * - Clear pci interrupts */ " over cmuch? if ( mid bitmap ) " " xlsplit ( mid pci-bit obio-bit ) " " rot cmuch-mid>clear-int-pa ( pci-bit obio-bit obio-pa pci-pa ) " " >r ( pci-bit obio-bit obio-pa ) ( r: pci-pa ) " " swap d# 20 clear-ints ( pci-bit ) ( r: pci-pa ) " " r> swap d# 32 clear-ints ( ) ( r: ) " /* * If the port is an Oberon, then the 64-bit bitmap is used fully. * * - Compute the base address of the interrupt clear registers * - Clear interrupts */ " else ( mid bitmap ) " " swap pcich-mid>clear-int-pa ( bitmap pa ) " " swap d# 64 clear-ints ( ) " " then " /* * Always return true from here. */ " true ( true ) " "; " ; static char install_master_interrupt_handler[] = "' unix-resend-mondos to unix-interrupt-handler"; static char handler[] = "unix-interrupt-handler"; static char handler_defined[] = "p\" %s\" find nip swap l! "; /*ARGSUSED*/ static int master_interrupt_init(uint32_t portid, uint32_t xt) { uint_t defined; char buf[sizeof (handler) + sizeof (handler_defined)]; if (master_interrupt_inited) return (1); /* * Check if the defer word "unix-interrupt-handler" is defined. * This must be defined for OPL systems. So, this is only a * sanity check. */ (void) sprintf(buf, handler_defined, handler); prom_interpret(buf, (uintptr_t)&defined, 0, 0, 0, 0); if (!defined) { cmn_err(CE_WARN, "master_interrupt_init: " "%s is not defined\n", handler); return (0); } /* * Install the generic master-interrupt handler. Note that * this is only done one time on the first DR operation. * This is because, for OPL, one, single generic handler * handles all ports (Oberon and CMU channel) and all * interrupt sources within each port. * * The current support is only for the Oberon and CMU-channel. * If any others need to be supported, the handler has to be * modified accordingly. */ /* * Define the OPL master interrupt handler */ prom_interpret(define_master_interrupt_handler, 0, 0, 0, 0, 0); /* * Take over the master interrupt handler from OBP. */ prom_interpret(install_master_interrupt_handler, 0, 0, 0, 0, 0); master_interrupt_inited = 1; /* * prom_interpret() does not return a status. So, we assume * that the calls succeeded. In reality, the calls may fail * if there is a syntax error, etc in the strings. */ return (1); } /* * Install the master-interrupt handler for a device. */ static int opl_master_interrupt(dev_info_t *ap, fco_handle_t rp, fc_ci_t *cp) { uint32_t portid, xt; int board, channel, leaf; int status; /* Check the argument */ if (fc_cell2int(cp->nargs) != 2) return (fc_syntax_error(cp, "nargs must be 2")); if (fc_cell2int(cp->nresults) < 1) return (fc_syntax_error(cp, "nresults must be >= 1")); /* Get the parameters */ portid = fc_cell2uint32_t(fc_arg(cp, 0)); xt = fc_cell2uint32_t(fc_arg(cp, 1)); board = OPL_IO_PORTID_TO_LSB(portid); channel = OPL_PORTID_TO_CHANNEL(portid); leaf = OPL_PORTID_TO_LEAF(portid); if ((board >= HWD_SBS_PER_DOMAIN) || !OPL_VALID_CHANNEL(channel) || (OPL_OBERON_CHANNEL(channel) && !OPL_VALID_LEAF(leaf)) || ((channel == OPL_CMU_CHANNEL) && (leaf != 0))) { FC_DEBUG1(1, CE_CONT, "opl_master_interrupt: invalid port %x\n", portid); status = 0; } else { status = master_interrupt_init(portid, xt); } cp->nresults = fc_int2cell(1); fc_result(cp, 0) = status; return (fc_success_op(ap, rp, cp)); } /* * Set the properties for a leaf node (Oberon leaf or CMU channel leaf). */ /*ARGSUSED*/ static int opl_create_leaf(dev_info_t *node, void *arg, uint_t flags) { int ret; OPL_UPDATE_PROP(string, node, "name", OPL_PCI_LEAF_NODE); OPL_UPDATE_PROP(string, node, "status", "okay"); return (DDI_WALK_TERMINATE); } static char * opl_get_probe_string(opl_probe_t *probe, int channel, int leaf) { char *probe_string; int portid; probe_string = kmem_zalloc(PROBE_STR_SIZE, KM_SLEEP); if (channel == OPL_CMU_CHANNEL) portid = probe->pr_sb->sb_cmu.cmu_ch.chan_portid; else portid = probe-> pr_sb->sb_pci_ch[channel].pci_leaf[leaf].leaf_port_id; (void) sprintf(probe_string, "%x", portid); return (probe_string); } static int opl_probe_leaf(opl_probe_t *probe) { int channel, leaf, portid, error, circ; int board; fco_handle_t fco_handle, *cfg_handle; dev_info_t *parent, *leaf_node; char unit_address[UNIT_ADDR_SIZE]; char *probe_string; opl_board_cfg_t *board_cfg; board = probe->pr_board; channel = probe->pr_channel; leaf = probe->pr_leaf; parent = ddi_root_node(); board_cfg = &opl_boards[board]; ASSERT(OPL_VALID_CHANNEL(channel)); ASSERT(OPL_VALID_LEAF(leaf)); if (channel == OPL_CMU_CHANNEL) { portid = probe->pr_sb->sb_cmu.cmu_ch.chan_portid; cfg_handle = &board_cfg->cfg_cmuch_handle; } else { portid = probe-> pr_sb->sb_pci_ch[channel].pci_leaf[leaf].leaf_port_id; cfg_handle = &board_cfg->cfg_pcich_handle[channel][leaf]; } /* * Prevent any changes to leaf_node until we have bound * it to the correct driver. */ ndi_devi_enter(parent, &circ); /* * Ideally, fcode would be run from the "sid_branch_create" * callback (that is the primary purpose of that callback). * However, the fcode interpreter was written with the * assumption that the "new_child" was linked into the * device tree. The callback is invoked with the devinfo node * in the DS_PROTO state. More investigation is needed before * we can invoke the interpreter from the callback. For now, * we create the "new_child" in the BOUND state, invoke the * fcode interpreter and then rebind the dip to use any * compatible properties created by fcode. */ probe->pr_parent = parent; probe->pr_create = opl_create_leaf; probe->pr_hold = 1; leaf_node = opl_create_node(probe); if (leaf_node == NULL) { cmn_err(CE_WARN, "IKP: create leaf (%d-%d-%d) failed", probe->pr_board, probe->pr_channel, probe->pr_leaf); ndi_devi_exit(parent, circ); return (-1); } /* * The platform DR interfaces created the dip in * bound state. Bring devinfo node down to linked * state and hold it there until compatible * properties are created. */ e_ddi_branch_rele(leaf_node); (void) i_ndi_unconfig_node(leaf_node, DS_LINKED, 0); ASSERT(i_ddi_node_state(leaf_node) == DS_LINKED); e_ddi_branch_hold(leaf_node); mutex_enter(&DEVI(leaf_node)->devi_lock); DEVI(leaf_node)->devi_flags |= DEVI_NO_BIND; mutex_exit(&DEVI(leaf_node)->devi_lock); /* * Drop the busy-hold on parent before calling * fcode_interpreter to prevent potential deadlocks */ ndi_devi_exit(parent, circ); (void) sprintf(unit_address, "%x", portid); /* * Get the probe string */ probe_string = opl_get_probe_string(probe, channel, leaf); /* * The fcode pointer specified here is NULL and the fcode * size specified here is 0. This causes the user-level * fcode interpreter to issue a request to the fcode * driver to get the Oberon/cmu-ch fcode. */ fco_handle = opl_fc_ops_alloc_handle(parent, leaf_node, NULL, 0, unit_address, probe_string); error = fcode_interpreter(parent, &opl_fc_do_op, fco_handle); if (error != 0) { cmn_err(CE_WARN, "IKP: Unable to probe PCI leaf (%d-%d-%d)", probe->pr_board, probe->pr_channel, probe->pr_leaf); opl_fc_ops_free_handle(fco_handle); if (probe_string != NULL) kmem_free(probe_string, PROBE_STR_SIZE); (void) opl_destroy_node(leaf_node); } else { *cfg_handle = fco_handle; if (channel == OPL_CMU_CHANNEL) board_cfg->cfg_cmuch_probe_str = probe_string; else board_cfg->cfg_pcich_probe_str[channel][leaf] = probe_string; /* * Compatible properties (if any) have been created, * so bind driver. */ ndi_devi_enter(parent, &circ); ASSERT(i_ddi_node_state(leaf_node) <= DS_LINKED); mutex_enter(&DEVI(leaf_node)->devi_lock); DEVI(leaf_node)->devi_flags &= ~DEVI_NO_BIND; mutex_exit(&DEVI(leaf_node)->devi_lock); ndi_devi_exit(parent, circ); if (ndi_devi_bind_driver(leaf_node, 0) != DDI_SUCCESS) { cmn_err(CE_WARN, "IKP: Unable to bind PCI leaf (%d-%d-%d)", probe->pr_board, probe->pr_channel, probe->pr_leaf); } } if ((error != 0) && (channel == OPL_CMU_CHANNEL)) return (-1); return (0); } static void opl_init_leaves(int myboard) { dev_info_t *parent, *node; char *name; int circ, ret; int len, portid, board, channel, leaf; opl_board_cfg_t *cfg; parent = ddi_root_node(); /* * Hold parent node busy to walk its child list */ ndi_devi_enter(parent, &circ); for (node = ddi_get_child(parent); (node != NULL); node = ddi_get_next_sibling(node)) { ret = OPL_GET_PROP(string, node, "name", &name, &len); if (ret != DDI_PROP_SUCCESS) { /* * The property does not exist for this node. */ continue; } if (strncmp(name, OPL_PCI_LEAF_NODE, len) == 0) { ret = OPL_GET_PROP(int, node, "portid", &portid, -1); if (ret == DDI_PROP_SUCCESS) { ret = OPL_GET_PROP(int, node, "board#", &board, -1); if ((ret != DDI_PROP_SUCCESS) || (board != myboard)) { kmem_free(name, len); continue; } cfg = &opl_boards[board]; channel = OPL_PORTID_TO_CHANNEL(portid); if (channel == OPL_CMU_CHANNEL) { if (cfg->cfg_cmuch_handle != NULL) cfg->cfg_cmuch_leaf = node; } else { leaf = OPL_PORTID_TO_LEAF(portid); if (cfg->cfg_pcich_handle [channel][leaf] != NULL) cfg->cfg_pcich_leaf [channel][leaf] = node; } } } kmem_free(name, len); if (ret != DDI_PROP_SUCCESS) break; } ndi_devi_exit(parent, circ); } /* * Create "pci" node and hierarchy for the Oberon channels and the * CMU channel. */ /*ARGSUSED*/ static int opl_probe_io(opl_probe_t *probe) { int i, j; hwd_pci_ch_t *channels; if (HWD_STATUS_OK(probe->pr_sb->sb_cmu.cmu_ch.chan_status)) { probe->pr_channel = HWD_CMU_CHANNEL; probe->pr_channel_status = probe->pr_sb->sb_cmu.cmu_ch.chan_status; probe->pr_leaf = 0; probe->pr_leaf_status = probe->pr_channel_status; if (opl_probe_leaf(probe) != 0) return (-1); } channels = &probe->pr_sb->sb_pci_ch[0]; for (i = 0; i < HWD_PCI_CHANNELS_PER_SB; i++) { if (!HWD_STATUS_OK(channels[i].pci_status)) continue; probe->pr_channel = i; probe->pr_channel_status = channels[i].pci_status; for (j = 0; j < HWD_LEAVES_PER_PCI_CHANNEL; j++) { probe->pr_leaf = j; probe->pr_leaf_status = channels[i].pci_leaf[j].leaf_status; if (!HWD_STATUS_OK(probe->pr_leaf_status)) continue; (void) opl_probe_leaf(probe); } } opl_init_leaves(probe->pr_board); return (0); } /* * Perform the probe in the following order: * * processors * memory * IO * * Each probe function returns 0 on sucess and a non-zero value on failure. * What is a failure is determined by the implementor of the probe function. * For example, while probing CPUs, any error encountered during probe * is considered a failure and causes the whole probe operation to fail. * However, for I/O, an error encountered while probing one device * should not prevent other devices from being probed. It should not cause * the whole probe operation to fail. */ int opl_probe_sb(int board) { opl_probe_t *probe; int ret; if ((board < 0) || (board >= HWD_SBS_PER_DOMAIN)) return (-1); ASSERT(opl_cfg_inited != 0); /* * If the previous probe failed and left a partially configured * board, we need to unprobe the board and start with a clean slate. */ if ((opl_boards[board].cfg_hwd != NULL) && (opl_unprobe_sb(board) != 0)) return (-1); ret = 0; probe = kmem_zalloc(sizeof (opl_probe_t), KM_SLEEP); probe->pr_board = board; if ((opl_probe_init(probe) != 0) || (opl_probe_cpu_chips(probe) != 0) || (opl_probe_memory(probe) != 0) || (opl_probe_io(probe) != 0)) { /* * Probe failed. Perform cleanup. */ (void) opl_unprobe_sb(board); ret = -1; } kmem_free(probe, sizeof (opl_probe_t)); return (ret); } /* * This unprobing also includes CMU-CH. */ /*ARGSUSED*/ static int opl_unprobe_io(int board) { int i, j, ret; opl_board_cfg_t *board_cfg; dev_info_t **node; fco_handle_t *hand; char **probe_str; board_cfg = &opl_boards[board]; for (i = 0; i < HWD_PCI_CHANNELS_PER_SB; i++) { for (j = 0; j < HWD_LEAVES_PER_PCI_CHANNEL; j++) { node = &board_cfg->cfg_pcich_leaf[i][j]; hand = &board_cfg->cfg_pcich_handle[i][j]; probe_str = &board_cfg->cfg_pcich_probe_str[i][j]; if (*node == NULL) continue; if (*hand != NULL) { opl_fc_ops_free_handle(*hand); *hand = NULL; } if (*probe_str != NULL) { kmem_free(*probe_str, PROBE_STR_SIZE); *probe_str = NULL; } ret = opl_destroy_node(*node); if (ret != 0) { cmn_err(CE_WARN, "IKP: destroy pci (%d-%d-%d) failed", board, i, j); return (-1); } *node = NULL; } } node = &board_cfg->cfg_cmuch_leaf; hand = &board_cfg->cfg_cmuch_handle; probe_str = &board_cfg->cfg_cmuch_probe_str; if (*node == NULL) return (0); if (*hand != NULL) { opl_fc_ops_free_handle(*hand); *hand = NULL; } if (*probe_str != NULL) { kmem_free(*probe_str, PROBE_STR_SIZE); *probe_str = NULL; } if (opl_destroy_node(*node) != 0) { cmn_err(CE_WARN, "IKP: destroy pci (%d-%d-%d) failed", board, OPL_CMU_CHANNEL, 0); return (-1); } *node = NULL; return (0); } /* * Destroy the "pseudo-mc" node for a board. */ static int opl_unprobe_memory(int board) { opl_board_cfg_t *board_cfg; board_cfg = &opl_boards[board]; if (board_cfg->cfg_pseudo_mc == NULL) return (0); if (opl_destroy_node(board_cfg->cfg_pseudo_mc) != 0) { cmn_err(CE_WARN, "IKP: destroy pseudo-mc (%d) failed", board); return (-1); } board_cfg->cfg_pseudo_mc = NULL; return (0); } /* * Destroy the "cmp" nodes for a board. This also destroys the "core" * and "cpu" nodes below the "cmp" nodes. */ static int opl_unprobe_processors(int board) { int i; dev_info_t **cfg_cpu_chips; cfg_cpu_chips = opl_boards[board].cfg_cpu_chips; for (i = 0; i < HWD_CPU_CHIPS_PER_CMU; i++) { if (cfg_cpu_chips[i] == NULL) continue; if (opl_destroy_node(cfg_cpu_chips[i]) != 0) { cmn_err(CE_WARN, "IKP: destroy chip (%d-%d) failed", board, i); return (-1); } cfg_cpu_chips[i] = NULL; } return (0); } /* * Perform the unprobe in the following order: * * IO * memory * processors */ int opl_unprobe_sb(int board) { if ((board < 0) || (board >= HWD_SBS_PER_DOMAIN)) return (-1); ASSERT(opl_cfg_inited != 0); if ((opl_unprobe_io(board) != 0) || (opl_unprobe_memory(board) != 0) || (opl_unprobe_processors(board) != 0)) return (-1); if (opl_boards[board].cfg_hwd != NULL) { #ifdef UCTEST size_t size = 0xA000; #endif /* Release the memory for the HWD */ void *hwdp = opl_boards[board].cfg_hwd; opl_boards[board].cfg_hwd = NULL; #ifdef UCTEST hwdp = (void *)((char *)hwdp - 0x1000); hat_unload(kas.a_hat, hwdp, size, HAT_UNLOAD_UNLOCK); vmem_free(heap_arena, hwdp, size); #else kmem_free(hwdp, HWD_DATA_SIZE); #endif } return (0); } /* * For MAC patrol support, we need to update the PA-related properties * when there is a copy-rename event. This should be called after the * physical copy and rename has been done by DR, and before the MAC * patrol is restarted. */ int oplcfg_pa_swap(int from, int to) { dev_info_t *from_node = opl_boards[from].cfg_pseudo_mc; dev_info_t *to_node = opl_boards[to].cfg_pseudo_mc; opl_range_t *rangef, *ranget; int elems; int ret; if ((OPL_GET_PROP_ARRAY(int, from_node, "sb-mem-ranges", rangef, elems) != DDI_SUCCESS) || (elems != 4)) { /* XXX -- bad news */ return (-1); } if ((OPL_GET_PROP_ARRAY(int, to_node, "sb-mem-ranges", ranget, elems) != DDI_SUCCESS) || (elems != 4)) { /* XXX -- bad news */ return (-1); } OPL_UPDATE_PROP_ARRAY(int, from_node, "sb-mem-ranges", (int *)ranget, 4); OPL_UPDATE_PROP_ARRAY(int, to_node, "sb-mem-ranges", (int *)rangef, 4); OPL_FREE_PROP(ranget); OPL_FREE_PROP(rangef); return (0); }